Pasar al contenido principal

PIEZOCERAMICAS LIBRES DE PLOMO MEDIANTE SINTERIZACION A BAJA TEMPERATURA: PROCESAMIENTO ENERGETICAMENTE EFICAZ Y MEDIOAMBIENTALMENTE SOSTENIBLE: SINTERIZACION POR MICROONDAS

PID2021-128548OB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Spark plasma sintering of beta-Eucryptite/alumina nanocomposites with low thermal expansion and improved mechanical properties obtained by colloidal route

  • López-Santos, N.
  • Díaz, L.A.
  • Fernández, A.
  • Suárez, M.
  • Benavente Martínez, Rut|||0000-0002-4566-9475
[EN] In this study, (3-Eucryptite/alumina nanocomposites were synthesized using colloidal methods and sintered by Spark Plasma Sintering (SPS). Nanocomposites with three different alumina contents (2.5, 5 and 10 wt%) were prepared, with pure (3-Eucryptite serving as a reference material. The microstructural characteristics of the nanocomposites were analyzed, and their mechanical properties (Young's modulus, hardness, flexural strength, fracture toughness) were evaluated. The incorporation of alumina nanoparticles effectively controlled the grain growth of (3-Eucryptite during the sintering process, resulting in a fine-grained structure. Compared to monolithic (3-Eucryptite, the nanocomposites exhibited significant enhancements in mechanical performance: hardness increased by at least 25 %, fracture toughness improved by 30 %, and mechanical strength rose by more than 40 %. Furthermore, the composites demonstrated a very low thermal expansion coefficient, making them promising candidates for a wide range of industrial applications., Authors acknowledges the financial support received through projects 3D-BoneWhey (PID2023-147490OB-I00) financed by MICIU/AEI/10.13039/501100011033, FreeSin (PID2021-128548OB-C21 & C22) , financed by MCIN/AEI/10.13039/501100011033, and MiLi (ID.101082451) financed by Horizon-CL4-2022-Space-01. The authors also thank Generalitat Valenciana for the funding CIAICO/2023/264.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of calcination rate on mechano-chemically activated powders for the synthesis of lead-free KNN-type ceramics

  • Bonilla-Molina, Ashley
  • Pruna, Alina Iuliana|||0000-0002-5250-066X
  • Benavente Martínez, Rut|||0000-0002-4566-9475
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
  • Busquets Mataix, David Jeronimo|||0000-0001-5031-7805
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
  • Fernández-González, Daniel
[EN] Given the raising environmental concerns over lead toxicity, replacing the common leadbased piezoelectric ceramics with a proper alternative became a hot topic. (Na0.5K0.5)NbO3 (KNN) is considered a potential replacement for such ceramics. This work presents the synthesis of KNN-type ceramics based on conventional solid-state reaction, where the effect of precursor particle size is studied. A combined mechanical activation by ball milling and calcination at low temperature of 800 ¿C is applied. The phase structure evolution, morphology and mechanical properties are investigated systematically with the particle size and the calcination rate. The results indicate a marked effect of the precursor particle size on the properties of obtained ceramics. Secondary phase content could be lowered and tetragonality improved by the applied approach. Despite the presence of secondary phases, dielectric measurements indicated typical values of dielectric constant and loss for piezoelectric materials., This publication is part of the grant PID2021-128548OBC21 & C22 funded by MICIU/AEI/10.13039/501100011033 and by ERDF/EU , and the grant CNS2023-144190 funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR . CIGRIS/2022/077 project funded by Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Microwave-Driven Densification of NASICON-type LATP: A Fast Route Toward Efficient Solid-State Electrolytes

  • Mormeneo-Segarra, Andrés|||0000-0002-8827-3649
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
  • Ferrer-Nicomedes, Sergio
  • Vicente-Agut, Nuria
[EN] The transition from flammable liquid electrolytes to safer solid-state electrolytes is essential for next-generation batteries. Li1.3Al0.3Ti1.7(PO4)3 (LATP) is a promising NASICON-type electrolyte, but its application is hindered by energy-intensive high-temperature sintering. This work demonstrates microwave sintering as a rapid and efficient route to fabricate dense, highly conductive LATP. Green bodies with a relative density of 71% were obtained by combined uniaxial and isostatic pressing, followed by microwave sintering between 800 and 1100 ºC for only 10 minutes. Optimal densification (91.4%) was achieved at 1000 ºC, while higher temperatures led to abnormal grain growth and rutile-TiO2 formation. Electrochemical impedance spectroscopy revealed a strong reduction in grain-boundary resistance above 950 ºC. LATP sintered at 1000 ºC exhibited an ionic conductivity of 5·10-4 S cm-1 and an activation energy of 0.20 eV. Symmetric Li|LATP|Li cells showed stable cycling over 500 h with low overpotentials, confirming excellent transport and mechanical integrity., This publication is part of the grants PID2021-128548OB-C21 & C22 and CNS2023-144190 funded by MICIU/AEI/10.13039/501100011033, "ERDF/EU" and the "European Union NextGenerationEU/PRTR". A.M.-S. acknowledges the funding from the Aid for Early Research Projects (PAID-06-25) and the postdoctoral fellowship (PAID-10-24) programs from the Vice-Rectorate for Research of Universitat Politecnica de Valencia. S.F.-N thanks Generalitat Valenciana through FPI Fellowship Program (CIACIF/2021/050) . N. V.-A. acknowledges support for the research from Universitat Jaume I under the project number UJI/2023/016. Authors thank Felipe L. Penaranda-Foix from ITACA facilities for performing the dielectric measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Deposition of advanced ceramic coatings by thermal spraying

  • Cañas, Eugeni
  • Benavente Martínez, Rut|||0000-0002-4566-9475
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
[EN] Advanced ceramic coatings have been largely used in several industrial fields such as aerospace, automotive, power generation, medical or petrochemical, in order to protect or functionalise the surface of different materials. In modern industries, thermal spray processes are the most used ones to manufacture advanced ceramic coatings due to their cost advantages, flexibility and efficiency in processing ceramic materials, especially those with high melting temperature. This chapter provides a brief overview of the progress and current state of different thermal sprayed ceramics and summarises the future trend in this field. Therefore, various advanced ceramics, such as yttria-stabilised zirconia, alumina, hydroxyapatite and bioactive glasses, have been selected for analysis and discussion.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhancing cutting tool durability: exploration of Al2O3-SiCw-graphene composites fabricated by SPS for improved mechanical and scratch resistance

  • Suárez, Marta
  • Pérez-Mas, Ana M.
  • Menéndez, Rosa
  • Gutiérrez, Carlos F.
  • Fernández, Adolfo
  • Benavente Martínez, Rut|||0000-0002-4566-9475
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
[EN] This study focuses on the fabrication and characterisation of Al2O3-SiCw-rGO composites sintered by spark plasma sintering (SPS) technique. The research is mainly focused on understanding the impact of varying graphene content (0.5, 1.0 and 1.5 vol %) on nanomechanical properties and scratch resistance. Among the compositions investigated, the composite containing 0.5 vol% graphene showed superior mechanical properties. Specifically, it exhibited a hardness of similar to 30 GPa, a fracture toughness of 10.5 MPa m(1/2) and a flexural strength of similar to 920 MPa. In addition, this composite showed remarkable scratch resistance compared to composites with a higher or lower graphene content. In addition to mechanical properties, the fabricated composites also exhibited high electrical conductivity. This characteristic is especially advantageous for electrical discharge machining (EDM) processes. The high electrical conductivity enables efficient machining of complex shapes by EDM, thereby reducing machining costs while ensuring accuracy and efficiency., This publication is part of the grant PID2021-128548OB-C21&C22 funded by MCIN/AEI/10.13039/501100011033. CINN-CSIC acknowledges the project CPP2022-009892. Authors are grateful to Moscow State University of Technology "Stankin" for the evaluation of the material under real conditions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fast-low temperature microwave sintering of ZrSiO4-ZrO2 composites

  • Moratal, Sheila
  • Rosado, Eduardo
  • Moreno, Rodrigo
  • Benavente Martínez, Rut|||0000-0002-4566-9475
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
  • Penaranda-Foix, Felipe L.|||0000-0003-4012-0763
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
[EN] Today, many industrial applications require components that work under extreme conditions, especially at very high temperatures (>1200 & DEG;C) for a long time. An excellent combination of properties such as low thermal conductivity, low coefficient of thermal expansion and high chemical resistance are required for such applications. Advanced ceramic materials based on zircon-zirconia composites (ZrSiO4-ZrO2) possess these properties, thus making them attractive for, i.e., high-level radioactive waste immobilisation. The main drawback of these materials are the high temperatures and long residence times required to sinter them and obtain high densities, which entails high energy consumption and costs. Therefore, non-conventional microwave sintering is a very powerful and efficient technique capable of reducing sintering temperatures and holding times. The objective of this study is to evaluate the microwave sinterability of zircon-zirconia powders obtained by colloidal methods (80-20 vol% and 20-80 vol% ZrSiO4-ZrO2). A stability study of the phases present was carried out by X-ray diffraction and the mechanical and microstructural properties were evaluated in order to obtain the best materials with outstanding final properties., Grants PID2021-128548OB-C21 and PID2021-124521OB-100 funded by MCIN/AEI/10.13039/501100011033 and "ERDF A way of making Europe". Grant CIGE/2021/076 funded by Generalitat Valenciana. E. Rosado acknowledges a MCIN/AEI pre -doctoral fellowship PRE2019-091092.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

(K0.5Na0.5)NbO3 (KNN) powder: Colloidal synthesis from different sodium and potassium precursors

  • Fernández-González, D.
  • Gómez-Rodríguez, C.
  • Menéndez, J. L.
  • Moya, J. S.
  • Suarez, M.
  • Fernandez, A.
  • Díaz, L. A.
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
[EN] Potassium sodium niobate ((K0.5Na0.5)NbO3, KNN) is a ceramic material with potential interest in the field of piezoelectric materials as an alternative to lead zirconate titanate, which involves the handling and manipulation of lead and its compounds. Different options exist to produce this material, including those based on chemical precursors. In this last case, starting from sodium and potassium ethoxides had never been reported in the literature. Results are compared with those obtained using carbonates of sodium and potassium. Niobium oxide (Nb2O5) with two sizes (nanometric and micrometric) has also been used for comparison. Results from the micro (nano)structural, optical, and dielectrical properties reveal that the best route of synthesis is based on nanometric Nb2O5 and ethoxides of sodium and potassium processed in ethanol, with nanometric size (mean grain size of 48 nm) and optical band gap of 3.24 eV for the synthesized KNN powders and dielectric loss below 0.25 and dielectric constant in the range 201-264 for sintered material (mean size of 2.18 mu m). The routes proposed in this manuscript might overcome the problems related to the obtaining of the pure (K0.5Na0.5)NbO3 when using mechanical mixing methods, while maintaining a nanometric grain size., The authors of the manuscript want to express their gratitude to the projects "Piezoceramicas sin plomo sinterizadas a baja temperatura: procesamiento energeticamente efectivo y ambientalmente sostenible mediante sinterizacion por SPS" (PID2021-128548OB-C22) and "Piezoceramicas libres de plomo mediante sinterizacion a baja temperatura: procesamiento energe ticamente eficaz y medioambientalmente sosten-ible: sinterizacion por microondas" (PID2021-128548OB-C21) funded by the Spanish Ministerio de Ciencia e Innovacion (MCIN) and Agencia Estatal de Investigacion (AEI, MCIN/AEI/10.13039/501100011033) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhanced properties of ZrSiO4/ZrO2 composites produced by colloidal processing and spark plasma sintering

  • Rosado, Eduardo
  • Suárez-Menéndez, Marta
  • Moreno, Rodrigo
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
  • Benavente Martínez, Rut|||0000-0002-4566-9475
[EN] Zirconium oxide and silicate are well-known reference materials in ceramics. However, the performance of zircon/zirconia composites has not received the required attention considering the interesting properties and capabilities. Zircon and zircon/zirconia suspensions were optimised by colloidal processing routes. These suspensions were either slip cast to obtain pieces that were conventionally sintered or freeze-dried to obtain homogeneous powder mixtures for consolidation by non-conventional Spark Plasma Sintering (SPS). Pure zircon materials with densities up to 97.0 % and a hardness of 10.1 GPa were obtained by conventional sintering (1550 degrees C/120 min) whereas densities higher than 99.5 % and hardness up to 12.7 GPa were achieved by SPS (1500 degrees C/ 5 min). By introducing 20 vol.% zirconia as a sintering additive, densities up to 99.3 % and a hardness of 11.1 GPa were achieved by conventional sintering (1500 degrees C/120 min) whereas densities of 99.9 % and a hardness of 13.5 GPa were obtained by SPS (1400 degrees C/5 min)., This publication is part of the grant PID2021-124521OB-I00 and PID2021-128548OB-C21 & C22 funded by MCIN/AEI/10.13039/ 501100011033, and pre-doctoral fellowship PRE2019-091092. CINNCSIC acknowledges the project CPP2022-009892.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Investigación de la sinterización por microondas de cerámicas (K,Na)NbO3 activadas mecánicamente, Investigation of microwave sintering of mechanically activated (K,Na)NbO3 ceramics

  • Bonilla-Molina, Ashley
  • Benavente Martínez, Rut|||0000-0002-4566-9475
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
  • Pruna, Alina
  • Busquets Mataix, David
  • Fernández, Adolfo
  • Díaz, Luís Antonio
  • Fernández, Daniel
[ES] La fácil volatilización de metales alcalinos durante los pasos de síntesis de los polvos y la sinterización es un inconveniente bien conocido de las cerámicas sin plomo basadas en (K, Na)NbO3 (KNN). La sinterización por microondas puede ser beneficiosa para la sinterización de KNN gracias a la baja temperatura y la corta duración involucrada. En este trabajo, la mezcla estequiométrica se ha homogeneizado por molienda de bolas, se ha calcinado por horno convencional y se ha compactado isostáticamente antes de ser sinterizada por microondas. Las propiedades de las cerámicas KNN obtenidas se analizaron con la temperatura y la duración de la sinterización por microondas, empleando el método de Arquímedes para determinar la densidad relativa, la difractometría de rayos X (DRX), la microscopía electrónica de barrido (SEM) y la espectroscopia de rayos X de dispersión de energía (EDS). Los resultados obtenidos muestran que el método de sinterización por microondas es un método prometedor para obtener cerámicas KNN densas y puras cuyas estructuras podrían adaptarse mediante un ajuste cuidadoso de las condiciones de sinterización empleadas., Esta comunicación es parte del proyecto de I+D+i / ayuda PID2021-128548OB-C21&C22, financiado por MCIN/AEI/10.13039/501100011033. Los autores también agradecen a la Generalitat Valenciana por la ayuda CIGRIS/2022/077.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fast-low temperature microwave sintering of ZrSiO4–ZrO2 composites

  • Moratal, Sheila
  • Rosado, Eduardo
  • Benavente, Rut
  • Salvador, María D.
  • Peñaranda-Foix, Felipe L.
  • Moreno, Rodrigo
  • Borrell, Amparo
[EN] Today, many industrial applications require components that work under extreme conditions, especially at very high temperatures (>1200 °C) for a long time. An excellent combination of properties such as low thermal conductivity, low coefficient of thermal expansion and high chemical resistance are required for such applications. Advanced ceramic materials based on zircon-zirconia composites (ZrSiO4–ZrO2) possess these properties, thus making them attractive for, i.e., high-level radioactive waste immobilisation. The main drawback of these materials are the high temperatures and long residence times required to sinter them and obtain high densities, which entails high energy consumption and costs. Therefore, non-conventional microwave sintering is a very powerful and efficient technique capable of reducing sintering temperatures and holding times. The objective of this study is to evaluate the microwave sinterability of zircon-zirconia powders obtained by colloidal methods (80–20 vol% and 20–80 vol% ZrSiO4–ZrO2). A stability study of the phases present was carried out by X-ray diffraction and the mechanical and microstructural properties were evaluated in order to obtain the best materials with outstanding final properties., Grants PID2021-128548OB-C21 and PID2021-124521OB-100 funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe”. Grant CIGE/2021/076 funded by Generalitat Valenciana. E. Rosado acknowledges a MCIN/AEI pre-doctoral fellowship PRE2019–091092., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced properties of ZrSiO4/ZrO2 composites produced by colloidal processing and spark plasma sintering

  • Rosado, Eduardo
  • Borrell, Amparo
  • Benavente, Rut
  • Suárez, Marta
  • Moreno, Rodrigo
Zirconium oxide and silicate are well-known reference materials in ceramics. However, the performance of zircon/zirconia composites has not received the required attention considering the interesting properties and capabilities. Zircon and zircon/zirconia suspensions were optimised by colloidal processing routes. These suspensions were either slip cast to obtain pieces that were conventionally sintered or freeze-dried to obtain homogeneous powder mixtures for consolidation by non-conventional Spark Plasma Sintering (SPS). Pure zircon materials with densities up to 97.0 % and a hardness of 10.1 GPa were obtained by conventional sintering (1550 ºC/120 min) whereas densities higher than 99.5 % and hardness up to 12.7 GPa were achieved by SPS (1500 ºC/5 min). By introducing 20 vol.% zirconia as a sintering additive, densities up to 99.3 % and a hardness of 11.1 GPa were achieved by conventional sintering (1500 ºC/120 min) whereas densities of 99.9 % and a hardness of 13.5 GPa were obtained by SPS (1400 ºC/5 min)., This publication is part of the grant PID2021–124521OB-I00 and PID2021–128548OB-C21 & C22 funded by MCIN/AEI/10.13039/501100011033, and pre-doctoral fellowship PRE2019–091092. CINN-CSIC acknowledges the project CPP2022–009892., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhancing cutting tool durability: Exploration of Al2O3-SiCw-graphene composites fabricated by SPS for improved mechanical and scratch resistance

  • Suárez, Marta
  • Benavente, Rut
  • Borrell, Amparo
  • Pérez Mas, Ana Matilde
  • Menéndez López, Rosa María
  • Gutiérrez-González, C. F.
  • Fernández, Adolfo
This study focuses on the fabrication and characterisation of Al2O3-SiCw-rGO composites sintered by spark plasma sintering (SPS) technique. The research is mainly focused on understanding the impact of varying graphene content (0.5, 1.0 and 1.5 vol %) on nanomechanical properties and scratch resistance. Among the compositions investigated, the composite containing 0.5 vol% graphene showed superior mechanical properties. Specifically, it exhibited a hardness of ∼30 GPa, a fracture toughness of 10.5 MPa m1/2 and a flexural strength of ∼920 MPa. In addition, this composite showed remarkable scratch resistance compared to composites with a higher or lower graphene content. In addition to mechanical properties, the fabricated composites also exhibited high electrical conductivity. This characteristic is especially advantageous for electrical discharge machining (EDM) processes. The high electrical conductivity enables efficient machining of complex shapes by EDM, thereby reducing machining costs while ensuring accuracy and efficiency., This publication is part of the grant PID2021-128548OB-C21&C22 funded by MCIN/AEI/10.13039/501100011033. CINN–CSIC acknowledges the project CPP2022-009892. Authors are grateful to Moscow State University of Technology “Stankin” for the evaluation of the material under real conditions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spark plasma sintering of β-Eucryptite/alumina nanocomposites with low thermal expansion and improved mechanical properties obtained by colloidal route

  • López-Santos, N.
  • Díaz, Luis A.
  • Benavente, Rut
  • Fernández, Adolfo
  • Suárez, Marta
Data will be made available on request., In this study, β-Eucryptite/alumina nanocomposites were synthesized using colloidal methods and sintered by Spark Plasma Sintering (SPS). Nanocomposites with three different alumina contents (2.5, 5 and 10 wt%) were prepared, with pure β-Eucryptite serving as a reference material. The microstructural characteristics of the nanocomposites were analyzed, and their mechanical properties (Young's modulus, hardness, flexural strength, fracture toughness) were evaluated. The incorporation of alumina nanoparticles effectively controlled the grain growth of β-Eucryptite during the sintering process, resulting in a fine-grained structure. Compared to monolithic β-Eucryptite, the nanocomposites exhibited significant enhancements in mechanical performance: hardness increased by at least 25 %, fracture toughness improved by 30 %, and mechanical strength rose by more than 40 %. Furthermore, the composites demonstrated a very low thermal expansion coefficient, making them promising candidates for a wide range of industrial applications., Authors acknowledges the financial support received through projects 3D-BoneWhey (PID2023-147490OB-I00) financed by MICIU/AEI/10.13039/501100011033, FreeSin (PID2021-128548OB-C21&C22), financed by MCIN/AEI/10.13039/501100011033, and MiLi (ID.101082451) financed by Horizon-CL4-2022-Space-01. The authors also thank Generalitat Valenciana for the funding CIAICO/2023/264., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

(K0.5Na0.5)NbO3 (KNN) powder: Colloidal synthesis from different sodium and potassium precursors

  • Fernández-González, Daniel
  • Gómez-Rodríguez, Cristian
  • Menéndez, José Luis
  • Borrell, Amparo
  • Moya, J. S.
  • Suárez, Marta
  • Fernández, Adolfo
  • Díaz, Luis A.
Potassium sodium niobate ((K0.5Na0.5)NbO3, KNN) is a ceramic material with potential interest in the field of piezoelectric materials as an alternative to lead zirconate titanate, which involves the handling and manipulation of lead and its compounds. Different options exist to produce this material, including those based on chemical precursors. In this last case, starting from sodium and potassium ethoxides had never been reported in the literature. Results are compared with those obtained using carbonates of sodium and potassium. Niobium oxide (Nb2O5) with two sizes (nanometric and micrometric) has also been used for comparison. Results from the micro(nano)structural, optical, and dielectrical properties reveal that the best route of synthesis is based on nanometric Nb2O5 and ethoxides of sodium and potassium processed in ethanol, with nanometric size (mean grain size of 48 nm) and optical band gap of 3.24 eV for the synthesized KNN powders and dielectric loss below 0.25 and dielectric constant in the range 201–264 for sintered material (mean size of 2.18 μm). The routes proposed in this manuscript might overcome the problems related to the obtaining of the pure (K0.5Na0.5)NbO3 when using mechanical mixing methods, while maintaining a nanometric grain size., The authors of the manuscript want to express their gratitude to the projects “Piezocerámicas sin plomo sinterizadas a baja temperatura: procesamiento energéticamente efectivo y ambientalmente sostenible mediante sinterización por SPS” (PID2021-128548OB-C22) and “Piezocerámicas libres de plomo mediante sinterización a baja temperatura: procesamiento energéticamente eficaz y medioambientalmente sostenible: sinterización por microondas” (PID2021-128548OB-C21) funded by the Spanish Ministerio de Ciencia e Innovación (MCIN) and Agencia Estatal de Investigación (AEI, MCIN/AEI /10.13039/501100011033)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Study of SPS Sintering of Strontium-Doped Lanthanum Manganite (LSM) by Surface Modification of Powders Using DCSBD and ALD

  • Borrell, Amparo
  • Benavente, Rut
  • Guillén, René M.
  • Salvador, María D.
  • Pouchly, Vaclav
  • Ilcikova, Martina
  • Krumpolec, Richard
  • Moreno, Rodrigo
Throughout the ceramic processing cycle, it is well known that a small change in the surface energy of as-received powders can have a considerable effect on the final properties of consolidated materials. The main objective of this chapter is to describe the design and manufacture of new ceramic materials based on strontium-doped lanthanum manganites, LSM (La0.8Sr0.2MnO3) and LSM-8YTZP composites, for cathode in solid oxide fuel cells (SOFC) applications due to their excellent properties, by modifying the surface energy of the starting powder using techniques, such as Diffuse Coplanar Surface Barrier Discharge (DCSBD) and atomic layer deposition (ALD). Subsequently, in order to evaluate the activation energy and optimise the sintering behaviour of these powders, the Spark Plasma Sintering (SPS) technique will be used. SPS allows the complete densification of pieces by fast and low-energy consumption processing., Grants PID2021-128548OB-C21 and PID2021-124521OB-100 funded by MCIN/ AEI/10.13039/501100011033 and “ERDF A way of making Europe”. Grant CIGE/ 2021/076 funded by Generalitat Valenciana.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of calcination rate on mechano-chemically activated powders for the synthesis of lead-free KNN-type ceramics, Efecto de la calcinación y de la activación mecanoquímica para obtener cerámicas sin plomo basadas en KNN

  • Bonilla, Ashley
  • Pruna, Alina
  • Benavente, Rut
  • Salvador, M. D.
  • Busquets-Mataix, David
  • Fernández-González, Daniel
  • Borrell, Amparo
[EN] Given the raising environmental concerns over lead toxicity, replacing the common lead-based piezoelectric ceramics with a proper alternative became a hot topic. (Na0.5K0.5)NbO3 (KNN) is considered a potential replacement for such ceramics. This work presents the synthesis of KNN-type ceramics based on conventional solid-state reaction, where the effect of precursor particle size is studied. A combined mechanical activation by ball milling and calcination at low temperature of 800 °C is applied. The phase structure evolution, morphology and mechanical properties are investigated systematically with the particle size and the calcination rate. The results indicate a marked effect of the precursor particle size on the properties of obtained ceramics. Secondary phase content could be lowered and tetragonality improved by the applied approach. Despite the presence of secondary phases, dielectric measurements indicated typical values of dielectric constant and loss for piezoelectric materials., [ES] La sustitución de las cerámicas piezoeléctricas comunes a base de plomo por una alternativa adecuada, se convirtió en un tema importante debido a las crecientes preocupaciones medioambientales por la toxicidad del plomo. Los (Na0.5K0.5)NbO3 (KNN) se consideran un posible reemplazo para cerámicas piezoeléctricas comunes a base de plomo. Este trabajo presenta la obtención de cerámicas tipo KNN mediante una reacción convencional en estado sólido donde se estudia el efecto del tamaño de las partículas precursoras. El método de síntesis ha empleado una combinación de molienda de atrición para activar la mezcla de precursores y de calcinación a baja temperatura de 800 °C. La evolución de las fases, la morfología y las propiedades mecánicas se investigan sistemáticamente con el tamaño de partícula y la rampa de calcinación. Los resultados indican un marcado efecto del tamaño de partícula del precursor sobre las propiedades de las cerámicas obtenidas. El contenido de fases secundarias y de la fase tetragonal se pueden ajustar ligeramente mediante el método presentado. Las medidas dieléctricas han indicado valores típicos para las cerámicas piezoeléctricas (constante dieléctrica y pérdidas) a pesar de la presencia de fases secundarias., This publication is part of the grant PID2021-128548OB-C21&C22 funded by MICIU/AEI/10.13039/501100011033 and by “ERDF/EU”, and the grant CNS2023-144190 funded by MICIU/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. CIGRIS/2022/077 project funded by Generalitat Valenciana., Peer reviewed