Pasar al contenido principal

Implementación y escalado industrial de tecnologías de producción innovadoras y eficientes en la fabricación de obleas de SiC para la fabricación de chips en electrónica de potencia

CPP2022-009892

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos en Colaboración Público-Privada
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario NANOKER RESEARCH, S.L.

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhancing cutting tool durability: exploration of Al2O3-SiCw-graphene composites fabricated by SPS for improved mechanical and scratch resistance

  • Suárez, Marta
  • Pérez-Mas, Ana M.
  • Menéndez, Rosa
  • Gutiérrez, Carlos F.
  • Fernández, Adolfo
  • Benavente Martínez, Rut|||0000-0002-4566-9475
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
[EN] This study focuses on the fabrication and characterisation of Al2O3-SiCw-rGO composites sintered by spark plasma sintering (SPS) technique. The research is mainly focused on understanding the impact of varying graphene content (0.5, 1.0 and 1.5 vol %) on nanomechanical properties and scratch resistance. Among the compositions investigated, the composite containing 0.5 vol% graphene showed superior mechanical properties. Specifically, it exhibited a hardness of similar to 30 GPa, a fracture toughness of 10.5 MPa m(1/2) and a flexural strength of similar to 920 MPa. In addition, this composite showed remarkable scratch resistance compared to composites with a higher or lower graphene content. In addition to mechanical properties, the fabricated composites also exhibited high electrical conductivity. This characteristic is especially advantageous for electrical discharge machining (EDM) processes. The high electrical conductivity enables efficient machining of complex shapes by EDM, thereby reducing machining costs while ensuring accuracy and efficiency., This publication is part of the grant PID2021-128548OB-C21&C22 funded by MCIN/AEI/10.13039/501100011033. CINN-CSIC acknowledges the project CPP2022-009892. Authors are grateful to Moscow State University of Technology "Stankin" for the evaluation of the material under real conditions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhanced properties of ZrSiO4/ZrO2 composites produced by colloidal processing and spark plasma sintering

  • Rosado, Eduardo
  • Suárez-Menéndez, Marta
  • Moreno, Rodrigo
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
  • Benavente Martínez, Rut|||0000-0002-4566-9475
[EN] Zirconium oxide and silicate are well-known reference materials in ceramics. However, the performance of zircon/zirconia composites has not received the required attention considering the interesting properties and capabilities. Zircon and zircon/zirconia suspensions were optimised by colloidal processing routes. These suspensions were either slip cast to obtain pieces that were conventionally sintered or freeze-dried to obtain homogeneous powder mixtures for consolidation by non-conventional Spark Plasma Sintering (SPS). Pure zircon materials with densities up to 97.0 % and a hardness of 10.1 GPa were obtained by conventional sintering (1550 degrees C/120 min) whereas densities higher than 99.5 % and hardness up to 12.7 GPa were achieved by SPS (1500 degrees C/ 5 min). By introducing 20 vol.% zirconia as a sintering additive, densities up to 99.3 % and a hardness of 11.1 GPa were achieved by conventional sintering (1500 degrees C/120 min) whereas densities of 99.9 % and a hardness of 13.5 GPa were obtained by SPS (1400 degrees C/5 min)., This publication is part of the grant PID2021-124521OB-I00 and PID2021-128548OB-C21 & C22 funded by MCIN/AEI/10.13039/ 501100011033, and pre-doctoral fellowship PRE2019-091092. CINNCSIC acknowledges the project CPP2022-009892.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced properties of ZrSiO4/ZrO2 composites produced by colloidal processing and spark plasma sintering

  • Rosado, Eduardo
  • Borrell, Amparo
  • Benavente, Rut
  • Suárez, Marta
  • Moreno, Rodrigo
Zirconium oxide and silicate are well-known reference materials in ceramics. However, the performance of zircon/zirconia composites has not received the required attention considering the interesting properties and capabilities. Zircon and zircon/zirconia suspensions were optimised by colloidal processing routes. These suspensions were either slip cast to obtain pieces that were conventionally sintered or freeze-dried to obtain homogeneous powder mixtures for consolidation by non-conventional Spark Plasma Sintering (SPS). Pure zircon materials with densities up to 97.0 % and a hardness of 10.1 GPa were obtained by conventional sintering (1550 ºC/120 min) whereas densities higher than 99.5 % and hardness up to 12.7 GPa were achieved by SPS (1500 ºC/5 min). By introducing 20 vol.% zirconia as a sintering additive, densities up to 99.3 % and a hardness of 11.1 GPa were achieved by conventional sintering (1500 ºC/120 min) whereas densities of 99.9 % and a hardness of 13.5 GPa were obtained by SPS (1400 ºC/5 min)., This publication is part of the grant PID2021–124521OB-I00 and PID2021–128548OB-C21 & C22 funded by MCIN/AEI/10.13039/501100011033, and pre-doctoral fellowship PRE2019–091092. CINN-CSIC acknowledges the project CPP2022–009892., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhancing cutting tool durability: Exploration of Al2O3-SiCw-graphene composites fabricated by SPS for improved mechanical and scratch resistance

  • Suárez, Marta
  • Benavente, Rut
  • Borrell, Amparo
  • Pérez Mas, Ana Matilde
  • Menéndez López, Rosa María
  • Gutiérrez-González, C. F.
  • Fernández, Adolfo
This study focuses on the fabrication and characterisation of Al2O3-SiCw-rGO composites sintered by spark plasma sintering (SPS) technique. The research is mainly focused on understanding the impact of varying graphene content (0.5, 1.0 and 1.5 vol %) on nanomechanical properties and scratch resistance. Among the compositions investigated, the composite containing 0.5 vol% graphene showed superior mechanical properties. Specifically, it exhibited a hardness of ∼30 GPa, a fracture toughness of 10.5 MPa m1/2 and a flexural strength of ∼920 MPa. In addition, this composite showed remarkable scratch resistance compared to composites with a higher or lower graphene content. In addition to mechanical properties, the fabricated composites also exhibited high electrical conductivity. This characteristic is especially advantageous for electrical discharge machining (EDM) processes. The high electrical conductivity enables efficient machining of complex shapes by EDM, thereby reducing machining costs while ensuring accuracy and efficiency., This publication is part of the grant PID2021-128548OB-C21&C22 funded by MCIN/AEI/10.13039/501100011033. CINN–CSIC acknowledges the project CPP2022-009892. Authors are grateful to Moscow State University of Technology “Stankin” for the evaluation of the material under real conditions., Peer reviewed