Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

DFT Study of Support Effects for O2 Dissociation on Cu5 Clusters: Opposite Trends in N-doped Graphene Compared to CeO2(111)

  • Fernández-Villanueva, Estefanía
  • Paier, Joachim
  • Sauer, Joachim
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
[EN] The metal-support interaction (MSI) effect of different supports, namely, N-doped graphene (N-graphene) and CeO2(111), on the properties of the planar 2D and 3D isomers of copper clusters of atomicity five was computationally studied at the PBE level (+U for Ce). For graphene-based systems, both pristine and defective sheets were considered. The stability, geometry and electronic properties of the supported Cu-5 clusters are discussed, and the dissociation of O-2 is studied on the most stable systems for both isomers. As expected, the interaction between Cu-5 and clean graphene or N-graphene is weak, and although adding nitrogen to graphene enhances the interaction, proper chemical adsorption is only achieved on the defects explored. In contrast, both Cu-5 isomers interact strongly with CeO2(111). The weaker MSI with N-graphene materials allows the deformation of the Cu-5 cluster upon O-2 adsorption, whereas CeO2(111) supported structures are more robust. O-2 dissociation on N-graphene-supported Cu-5 is consistent with our previous results on gas-phase clusters, i.e. the 2D isomer is more resistant to oxidation than the 3D one but the latter is more easily reducible, while on CeO2(111) this trend is reversed due to the strong MSI., This work was supported by the Spanish Ministry of Science and Innovation (MINECO) through the Severo Ochoa Program (SEV-2016-0683 and CEX2021-001230-S). Red Espanola de Supercomputacion (RES) and Centre de Calcul de la Universitat de Valencia are gratefully acknowledged for computational resources and technical support. E.F. thanks the Spanish MINECO for her fellowship SVP-2013-068146 and mobility grant EEBB-I-17-12057. The work on Cu5/CeO2 was performed during a visit of E. F. at Humboldt Universitat. The work at Humboldt Universitaet was supported by the German Research Foundation (DFG) within the Cluster of Excellence "Unifying Concepts in Catalysis" (EXC314).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multi-component catalysts with integrated MWW-type layers and mixed oxide domains for glucose-to-formic acid oxidation

  • Esteban-Barrera, Cristina|||0009-0007-7940-9018
  • Velty, Alexandra|||0000-0002-8263-4570
  • Díaz, Urbano|||0000-0003-1472-8724
[EN] The development of efficient and multi-component catalysts with distinct active sites is essential to promote chemically and economically circular processes and to achieve sustainable development. In this work, various multi-component materials were synthesized combining the properties of MWW zeolitic layers and MgAl mixed oxides. Synthesis conditions were successfully developed and optimized to achieve the in situ formation of nanometric sub-domains of layered double hydroxides (LDHs) on the surfaces and within the microporous cavities and channels of MWW layers (methods I and II). Additionally, multi-component materials were prepared by mixing MWW lamellar precursors and preformed layered double hydroxides, using swelling and exfoliation techniques and combined with sonification and ball-milling techniques (method III). Calcination yielded materials effectively integrating zeolitic MWW layers with MgAl oxides, displaying distinct structural features depending on the synthesis method. The catalytic performance of these materials was evaluated in the oxidation of glucose to formic acid (FA) using H2O2 as the oxidant. Among the catalysts investigated, MWW@MgAl-in situ-40, which combined suitable textural properties and basicity, showed superior activity, achieving a 47.7% FA yield at 66.2% glucose conversion after 7.5 h at 363 K in dioxane., The authors are grateful for the financial support from the Spanish Ministry (projects PID2023-146114NB-C21 and CEX2021-001230-S, funded by MCIN/AEI/10.13039/501100011033). This study forms part of the Advanced Materials program and was supported by MCIN with funding from the European Union NextGeneration (PRTRC17.I1) and by Generalitat Valenciana (MFA/2022/003). C. E. has been partially supported by the Spanish Government through the FPI pre-doctoral scholarship number PRE2019-089547 under project SEV-2016-0683-19-3. The authors acknowledge the Microscopy Service of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design and characterization of multi-component lamellar materials based on MWW-type zeolitic layers and metal oxide sub-domains

  • Esteban-Barrera, Cristina|||0009-0007-7940-9018
  • Velty, Alexandra|||0000-0002-8263-4570
  • Díaz, Urbano|||0000-0003-1472-8724
[EN] The preparation of multi-component catalysts with tailored properties and high activity is essential for advancing sustainable catalytic processes and contributes to a healthy planet. In this study, we synthesised several families of multi-component materials by combining MWW-type zeolitic layers with MgAlCe oxide sub-domains at the nanometric scale, employing different approaches. Methods I and II involve the co-precipitation of MgAlCe LDH using various sources of Mg2+, Ce4+ and Al3+ in the presence of MWW zeolites. Method III utilizes swelling and intercalation of MWW with pre-formed LDH phases. After calcination, multi-component materials with integrated zeolitic layers and MgAlCe oxides were obtained, revealing significant structural differences across the methods. Method II allowed the co-precipitation of MgAlCe LDH sub-domains and promoted strong interactions between these LDH sub-domains and the MWW zeolite structure, disrupting regular LDH stacking. This interaction affects the structural organisation and results in inconsistently and irregularly stacked LDH layers, as shown by XRD patterns. Moreover, the presence of strong interactions with the zeolitic framework led to modify the chemical environment of the MWW structure. The characterization study revealed that these materials possess accessible acidic, basic, and redox sites, underscoring their potential as multi-functional catalysts. The homogeneous distribution of active sites within the porous zeolitic network would facilitate cooperative interactions between active centres of the zeolite structure and metallic oxides, while the small particle size and high dispersion of MgAlCe oxides should improve both the accessibility to these active sites and their number. Collectively, these structural and chemical properties make these multi-functional and component materials promising candidates for heterogeneous catalytic applications contributing to sustainable development and supporting efforts for a healthier planet., The authors are grateful for the financial support from the Spanish Ministry (projects PID2020-112590GB-C21, PID2023-146114NB-C21 and CEX2021-001230-S, funded by MCIN/AEI/10.13039/501100011033). This study forms part of the Advanced Materials program and was supported by MCIN with funding from the European Union NextGeneration (PRTR-C17.I1) and by Generalitat Valenciana (MFA/2022/003). C. E. has been partially supported by the Spanish Government through the FPI pre-doctoral scholarship number PRE2019-089547 under project SEV-2016-0683-19-3.