Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Catalytic oxidation of volatile organic compounds with Mn-zeolites

  • Toloza-Blanco, Lyzed Arelis
  • Góra-Marek, Kinga
  • Tarach, K. A.
  • Sobalska, J.
  • Plá-Hernandez, Adrián
  • Martínez-Triguero, Joaquín|||0000-0003-4590-724X
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
[EN] Mn-catalysts supported on zeolites are active materials for oxidising volatile organic compounds, but the catalysts' activity and selectivity depend on the support's characteristics. In this work, we study the performance of different Mn catalysts supported on zeolites with different Si/Al ratios and topology in the ethanol oxidation reaction. The results show a correlation between the mechanism of the reaction and the presence or absence of acid sites on the zeolite surface, which is based on its aluminium content. It is observed that the presence of Bronsted acid sites catalyses ethanol dehydration to ethylene that is oxidised to CO2 at higher temperatures. Without protonic acid sites, ethanol is primarily oxidised to acetaldehyde and subsequently oxidised to CO2, achieving a complete oxidation at lower temperatures. The acidity also influences the nature of the metallic active sites, forming Mn-oxo species with higher oxidation state in the catalyst with lower aluminium content. These species are more active than those formed in the catalyst enriched with Bronsted acid sites. Thus, zeolites with higher Si/Al ratios are more adequate for supporting Mn catalysts in the ethanol oxidation reaction. The results show that low acidity is a decisive factor in designing active catalysts for this reaction, while zeolite topology or catalyst surface area are of secondary importance., The authors are grateful for the financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033; TED2021-131715B-I00 grant funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" by the European Union NextGeneration EU/PRTR and PID2021-126235OB-C31) . Financial support by the Generalitat Valenciana (Prometeo 2021/077) is also acknowledged. L. Toloza thanks Fundacion Carolina for the pre-doctoral grant, call 2019-2020 Universidad Central de Colombia and Universitat Politecnica de Valencia agreement. A. Pla-Hernandez thanks Spanish Ministry of Science and Innovation for the pre-doctoral grant PRE2019-088100, associated with the project RTI2018-101784-B-I00. FT-IR and UV-vis in situ and operando studies were financed by Grant No. 2021/41/B/ST4/00048 from the National Science Centre, Poland.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hard Carbons from Textile Waste Cotton as Sustainable Anodic Component for Sodium Ion Batteries

  • Rapeyko, Anastasia|||0000-0002-8309-3702
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
  • Díaz, Urbano|||0000-0003-1472-8724
  • Renz, Michael|||0000-0002-1101-9562
[EN] The increasing share of renewable energy, such as solar and wind energy, in the energy mix implies a demand for sustainable energy storage systems for the mitigation of the intermittency of these energy sources. One option, therefore, is stationary batteries based on abundant sodium, stored in hard carbon (HC) anodes. In this work, following the sustainable by design principle, HCs were synthesized from cotton-based textile waste using three different thermochemical routes: hydrothermal carbonization (HTC) followed by pyrolysis under nitrogen atmosphere (HC-250-N), HTC followed by pyrolysis under a water vapor stream (HC-250-W), and direct pyrolysis (HC-direct-N). The impact of the synthesis method on the physicochemical properties and electrochemical performance of the HCs was thoroughly investigated. X-ray diffraction, Raman spectroscopy, electron microscopy, and gas adsorption analyses revealed that the HTC pre-treatment significantly enhanced the carbon content, microporosity, and degree of structural graphitic order. HC-250-N exhibited the highest graphitic character and more uniform microstructure, while HC-250-W showed the largest specific surface area and broader micropore distribution. Electrochemical evaluation in sodium-ion half-cells indicated that HC-250-N delivered the most balanced performance, with a reversible capacity of 335 mAh g-1 and good cycling stability. These findings confirm the potential of textile waste-derived HCs as promising and sustainable anode materials for sodium-ion batteries and highlight the importance of tailoring synthesis parameters-such as HTC treatment and pyrolysis conditions-to optimize their structural and electrochemical properties., This work was funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by "ERDF A way of making Europe", by the "European Union" or by the "European Union NextGenerationEU/PRTR", with the grant reference TED2021-131715B-I00 and the acronym Fabrics2SIB. Financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Pt-zeolites as active catalysts for the removal of chlorate in water by hydrogenation reactions

  • Plá-Hernandez, Adrián
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
[EN] Catalytic hydrogenation is used to remove chlorate ions from water streams by using platinum catalysts supported on zeolites with different topologies (FAU, BEA, MWW, MFI and MOR), Si/Al ratio and compensating cation. It is observed that there is an important influence of the zeolite characteristics on the catalytic activity. The best results have been obtained with the catalyst supported on zeolites with a high number of acid centres, this is with a low Si/Al ratio and with protons, as counter-cation species compensating aluminium charge. The acid sites favour the interaction of the catalyst with the reactants and influence the neighbouring Pt species improving the redox properties of the catalyst. It is shown that with an adequate number of acid sites it is possible to decrease the metal content, keeping the same catalytic activity, by increasing the metal dispersion. The highest activity is obtained with an acidic FAU zeolite, with low Si/Al ratio and 1 wt% of Pt added by ion exchange. This catalyst is able to simultaneously reduce chlorate and chlorite ions and chlorate and bromate ions indicating that it is a multifunctional catalyst that can be utilized for removing different pollutants in water., The authors are grateful for the financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033, and TED2021-131715B-I00 grant funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe " by the European Union NextGenerationEU/PRTR) . Financial support by the Generalitat Valenciana (Prometeo 2021/077) is also acknowledged. A. Pla-Hernandez thanks Spanish Ministry of Science and Innovation for the pre-doctoral grant PRE2019-088100, associated with the project RTI2018-101784-B-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Pt-V bimetallic catalysts for the catalytic reduction of chlorate ion pollutants in natural water

  • Plá-Hernandez, Adrián
  • Gora-Marek, K.
  • Tarach, K. A.
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
[EN] Pt-V bimetallic catalysts supported on alumina are studied for the chlorate hydrogenation reaction in water phase. It is observed that there is a synergic effect between Pt and V that enhances the catalytic activity. The activity of both mono and bimetallic catalysts has been studied in polluted natural water containing other ionic species together with the chlorate ion. It is observed that the monometallic catalysts are not active in these conditions as there is a competitive adsorption of the other anions present in natural water for the Pt active sites. Contrarily, Pt-V catalysts are active in natural water being able to reduce the chlorate ions of the media in presence of other ions. The materials have been characterized by different techniques observing that the addition of vanadium to the Pt-Al2O3 modifies the electronic properties of the platinum sites, due to a high electronic interaction of both metals. This interaction favours the formation of partially positively charged platinum nanoclusters and strength the acidity of the catalyst surface. Infrared characterization using CO as probe molecule provided selective information about the centres participating in the reaction. It is shown that there is a correlation between the intensity of the band around 2100 cm(-1), assigned to the interaction CO-Pt+delta and the initial activity of the catalysts. This indicates that partially charged Pt nanoclusters are the most active sites for the chlorate reduction. The combination of the noble and the non-noble metal and their interaction with the alumina support, improves the redox and acid properties of the catalyst enhancing its activity and making possible the reduction of chlorate pollutants in natural water., Authors thank the financial support of the Ministerio Espanol de Ciencia e Innovacion (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033, and TED2021-131715B-I00 grant funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" by the European Union Next Generation EU/PRTR) . Financial support by the Generalitat Valenciana (Prometeo 2021/077) is also acknowledged. A. Pla-Hernandez thanks Ministerio Espanol de Ciencia e Innovacion for the pre-doctoral grant PRE2019-088100, associated with the project RTI2018-101784-B-I00. The FT-IR research was partially carried out using research infrastructure purchased with the funds of the European Union in the framework of the Smart Growth Operational Programme, Measure 4.2; Grant No. POIR.04.02.00-00-D001/20-00, "ATOMIN 2.0 - ATOMic scale science for the INnovative economy"
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Catalytic hydrogenation of Cl-oxyanion pollutants in water

  • Plá-Hernandez, Adrián
  • Cerrillo, José Luis
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
[EN] Pt and Pd catalysts supported on alumina have been tested and characterised for the catalytic hydrogenation of chlorates at room temperature and atmospheric pressure. Metallic nanoparticles are the catalytic active species, obtaining better results with the Pt than with the Pd catalysts. It is observed that the activity of the Pt catalysts depends on the metal precursor used for their preparation and the calcination temperature as these factors lead to different platinum dispersion on the alumina surface. The best results were obtained with the catalysts prepared from metal precursors containing Cl atoms and calcined at lower temperatures, as smaller metallic crystallites are formed. The chlorate reduction profiles displayed a pseudo-first order kinetic towards chlorate. The optimised catalyst was tested for the reduction of the different Cl-oxyanions, proving that the reaction rate depends on the chlorine valence of the ion following this order: ClO4- < ClO3- < ClO2- . This is due to the different molecular geometry of the anions that results in different stability of the ClOx -. The optimised catalyst was fully stable in successive uses, being active for the simultaneous reduction of chlorate, chlorite and bromate in water., The authors are grateful for the financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033, and TED2021-131715B-I00 grant funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" by the European Union NextGenerationEU/PRTR) are gratefully acknowledged. Financial support by the Generalitat Valenciana (Prometeo 2021/077) is also acknowledged. A. Pla-Hernandez thanks Spanish Ministry of Science and Innovation for the pre-doctoral grant PRE2019-088100, associated with the project RTI2018-101784-B-I00. Finally, we thank Raphael Scherbauer and Josephine Goethals for collaborating on the catalytic experiments.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hard Carbon-Zeolite composites from textile cotton waste: a sustainable route to porous functional materials

  • Rapeyko, Anastasia|||0000-0002-8309-3702
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
  • Renz, Michael|||0000-0002-1101-9562
  • Díaz, Urbano|||0000-0003-1472-8724
[EN] NaX-hard carbon (HC) hybrid materials were synthesized by direct incorporation of biowaste-derived HC, obtained from cotton textile waste, into the zeolitic sol-gel precursor during hydrothermal crystallization. The synthesis conditions were optimized to suppress the formation of competing NaP phases, enabling the crystallization of phase-pure FAU-type NaX even at HC loadings as high as 49 wt%. XRD, 29Si and 27Al MAS NMR, and XPS analyses confirmed that the zeolite framework remains structurally preserved after HC incorporation. Textural characterization by N2, CO2 and Ar adsorption revealed the coexistence of zeolitic micropores and carbon-derived ultramicropores, giving rise to hybrid materials with complementary microporosity and tunable structural and textural properties. Despite the high carbon content, the composites retained high surface areas and micropore volumes, suggesting that the hard carbon phase contributes complementary accessible porosity in addition to the intrinsic zeolitic microporosity. Overall, this work demonstrates a simple and sustainable strategy for transforming textile waste into functional zeolite-carbon hybrid materials, providing a promising platform for future studies on adsorption and related porous-material applications., This work was funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by "ERDF A way of making Europe", by the "European Union" or by the "European Union NextGenerationEU/PRTR", with the grant reference TED2021-131715B-I00 and the acronym Fabrics2SIB. Financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S and PID2023-146114NB-C21 grants funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged. U.D. thanks the Generalitat Valenciana for its grant to support the project with reference CIAICO/2024/083.