Pasar al contenido principal

DESCARBONIZACION DE LA INDUSTRIA DE PROCESOS MEDIANTE LA CATALISIS INTENSIFICADA POR INTEGRACION DE TECNOLOGIAS FACILITADORAS ESENCIALES

PID2022-139663OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 34
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Defect-surface engineering of La-doped ceria for microwave-assisted hydrogen production

  • Domínguez-Saldaña, Aitor|||0000-0001-7539-7493
  • Carrillo-Del Teso, Alfonso Juan
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • García-Baños, Beatriz|||0000-0001-7862-3417
  • Plaza González, Pedro José|||0000-0002-2623-0782
  • Catalá Civera, José Manuel|||0000-0002-0617-1762
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Navarrete Algaba, Laura
  • Santos, Joaquin
  • Catalán-Martínez, David
[EN] Hydrogen plays a pivotal role in decarbonizing the energy and chemical sectors, yet current production methods are limited by high temperatures and energy demands. Microwave-assisted thermochemical redox cycles offer a promising low-temperature, contactless alternative by coupling electromagnetic energy with reducible oxides. In this study, we explore La-doped ceria (Ce1-xLaxO2-delta) as a tunable platform to enhance microwave-driven hydrogen production. We demonstrate that introducing La3+ into the ceria lattice reduces the bandgap and increases dielectric permittivity, enabling Ce4+ to Ce3+ reduction at temperatures as low as 110 degrees C. Among the series, Ce0.9La0.1O1.95 exhibits optimal performance, balancing high ionic mobility and microwave absorption. Combined with tailored surface area, this composition achieves an unprecedented hydrogen production rate of 2.60 mL g-1 per cycle at temperatures below 400 degrees C. Correlations between dopant concentration, polarization behavior, and redox kinetics reveal the key role of band structure breakdown and defect formation in driving non-equilibrium reduction. Our findings uncover mechanistic insights into microwave-material interactions and establish design principles for next-generation redox materials. This approach provides a framework for scalable, electrified hydrogen production via electronic structure and defect engineering in oxide systems., Financial support by the Spanish Ministry of Science and Innovation and European Union (TED2021-132590B-C22, NextGenerationEU/PRTR, PID2022-139663OB-100, and CEX2021-001230-S grants funded by MCIN/AEI/10.13039/501100011033, "Ramon y Cajal" Fellowship RYC2021-033889-I grants) and Vice-Rectorate for Research of the Universitat Politecnica de Valencia (PAID-06-24 grants). Also, we acknowledge the support of the Servicio de Microscopia Electronica of the UPV.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Microwave-Driven Reduction Accelerates Oxygen Exchange in Perovskite Oxides

  • Domínguez-Saldaña, Aitor|||0000-0001-7539-7493
  • Carrillo-Del Teso, Alfonso Juan
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Santos-Blasco, Joaquín
  • García-Baños, Beatriz|||0000-0001-7862-3417
  • Plaza González, Pedro José|||0000-0002-2623-0782
  • Gutiérrez Cano, José Daniel
  • Penaranda-Foix, Felipe L.|||0000-0003-4012-0763
  • Catalá Civera, José Manuel|||0000-0002-0617-1762
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Navarrete, Laura
  • Catalán-Martínez, David
[EN] Microwave-assisted oxide reduction has emerged as a promising method to electrify chemical looping processes for renewable hydrogen production. Moreover, these thermochemical cycles can be used for thermochemical air separation, electrifying the O-2 generation by applying microwaves in the reduction step. This approach offers an alternative to conventional cryogenic air separation, producing pure streams of O-2 and N-2. The electrification by microwaves lowers the requirements for titanate perovskites (CaTi1-xMnxO3-delta), which typically demand high temperatures for thermochemical cycles. Microwave activation allows for a drastic reduction in the operation conditions of the reduction reaction, leading to unprecedentedly rapid absorption-desorption cycles (<3 min per cycle). For CaTi0.8Mn0.2O3-delta, we achieved a cycle-averaged O-2 production of 2.6 mL g(-1) min(-1) at 800 degrees C, surpassing conventional values of materials operating in the high-temperature regime. This method could significantly impact thermochemical air separation by enabling a faster oxygen absorption-desorption cycle at more moderate temperatures than those of conventionally heated processes., This study forms part of the MFA program and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana (CIPROM/2022/10). Financial support by the Spanish Ministry of Science and Innovation (PID2022-139663OB-100 and CEX2021-001230-S grants funded by MCIN/AEI/10.13039/501100011033 and "Ramon y Cajal" Fellowship RYC2021-033889-I) and the Universitat Politecnica de Valencia (UPV) is gratefully acknowledged. Also, we acknowledge the support of the Servicio de Microscopia Electronica of the UPV.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhanced CO2 separation via molten-carbonate membranes with freeze-cast, porous ceramic supports

  • Tsochataridou, S.
  • Papaioannou, E.I.
  • Mutch, G. A.
  • Gaudillere, C.
  • Metcalfe, I. S.
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Molten-carbonate membranes with freeze-cast, porous ceramic supports were fabricated and tested for high temperature CO2 separation. The freeze-casting fabrication method resulted in highly porous and hierarchically organized ceramic supports. The versatility of the freeze-casting method was demonstrated by fabricating ionic (oxide-ion) and mixed ionic-electronic conducting membrane supports, namely, La0.58Sr0.4Fe0.8Co0.2O3-delta (LSFC), Ce0.8Gd0.2O1.9 (CGO) and Y0.2Zr0.8O1.9 (YSZ). The resulting membranes showed very high CO2 permeance, achieving maximum values of similar to 1.5 x 10(-7)mol Pa-2 s(-2) m(-2) at 850 degrees C. The gas permeation results demonstrated that the pore microstructure resulting from freeze-casting provides higher CO2 permeances than membranes fabricated from the same materials, but using other fabrication methods, in the literature., Additional metadata are available at: 10.25405/data.ncl.12443531. For the purpose of open access, the author has applied a Creative Commons Attribution (CC BY) licence to any Author Accepted Manu-script version arising from this submission. The research leading to these results has received funding from the European Research Council under the European Union's Seventh Framework Program (FP/2007-2013) /ERC Grant Agreement Number 320725. This work was supported by the Engineering & Physical Sciences Research Council [grant numbers EP/P009050/1, EP/P007767/1, EP/M01486X/1, EP/V047078/1, EP/W03395X/1, EP/Y034961/1] , the Spanish Government (PID2022-139663OB-100 and CEX2021-001230-S grants funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (CIPROM/2022/10 grant) . ST thanks EPSRC for the funding of a PhD studentship. GAM was supported by the Royal Academy of Engineering under the Research Fellowship scheme.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Rational design of Ni-sepiolite catalysts: Impact of incorporation method and metal loading on CO2 methanation efficiency

  • Machado-Da Silva, Raúl Bruno
  • Chica, Antonio
  • Cerdá-Moreno, Cristina
[EN] The influence of Ni incorporation methods and metal loading on sepiolite-based catalysts for the CO2 methanation reaction was investigated. Catalysts synthesized via precipitation exhibited a Ni phase strongly interacting with a partially folded sepiolite structure, as revealed by 29Si-NMR and TPR analyses, distinct from those obtained by incipient wetness impregnation. The precipitation method resulted in catalysts with enhanced reducibility and a fourfold increase in Ni0 surface area, as confirmed by XPS and H2-chemisorption measurements, which correlated with higher CO2 conversion and CH4 selectivity observed. Among the precipitation-based catalysts, the one with 20 wt% Ni loading exhibited the optimal balance between Ni0 surface area (13.6 m2 gCAT-1 ) and catalytic performance (0.233 mol CH4 gCAT-1 h-1, at 400 degrees C). Stability tests demonstrated that this catalyst maintained a steady CH4 yield over 24 h of continuous operation., Financial support from the Spanish Ministry of Science and Innova-tion (PID2022-139663OB-100, TED2021-130372B-C44 and CEX2021-001230-S grants funded by MCIN/AEI/10.13039/501100011033) and by Generalitat Valenciana (CIPROM/2022/10 grant) are acknowledged. Raul Bruno Machado da Silva also thanks the "la Caixa" Foundation InPhINIT Program (ID 100010434) , fellowship code LCF/BQ/DI19/11730019, for the funding.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Methane dehydroaromatization in a catalytic co-ionic membrane reactor: A parametric study with finite element analysis

  • Catalán-Martínez, David
  • Kjølseth, Christian
  • Santafé Moros, María Asunción|||0000-0002-0933-108X
  • Gozálvez-Zafrilla, José M.|||0000-0003-4419-6765
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Methane dehydroaromatization produces benzene from natural gas or biomethane in one step but faces thermodynamic and catalyst deactivation challenges due to coke formation. Co-ionic conducting membrane reactors mitigate these issues by extracting hydrogen and injecting oxide ions, boosting benzene yield, and suppressing coke. This study develops a finite element computational model that integrates gas flow, species transport, catalytic reactions, and electrochemical effects. Using kinetic parameters fitted from experimental data, the model analyses the impact of electrochemical ion pumping, feed rate, space velocity, and geometry on benzene yield and coke suppression. Results show that hydrogen generation is mainly limited by ethylene formation kinetics. Even so, for the high catalyst loads studied (GSHV = 500 NmL/(g¿h)), methane conversion higher than 50 % and benzene selectivity of 80 % are achieved. Parametric studies identified optimal geometry and conditions that allow over 95 % hydrogen extraction, shifting conversion toward benzene formation. Additionally, the model pinpoints conditions where local steam suppresses coke without causing catalyst deactivation via oxidation or reforming reactions., This work was supported by the Spanish Ministry for Science and Innovation [PID2022 139663OB-I00 and CEX2021 001230-S grants funded by MCIN/AEI/10.13039/501100011033] and Generalitat Valenciana [CIPROM/2022/10].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Co2MnO4/Ce0.8Tb0.2O2-δ Dual-Phase Membrane Material with High CO2 Stability and Enhanced Oxygen Transport for Oxycombustion Processes

  • Laqdiem-Marin, Marwan
  • García-Fayos, Julio
  • Carrillo-Del Teso, Alfonso Juan
  • Almar-Liante, Laura|||0000-0001-5103-3812
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Fabuel Robledo, Maria
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Oxygen transport membranes (OTMs) are a promising oxygen production technology with high energy efficiency due to the potential for thermal integration. However, conventional perovskite materials of OTMs are unstable in CO2 atmospheres, which limits their applicability in oxycombustion processes. On the other hand, some dual-phase membranes are stable in CO2 and SO2 without permanent degradation. However, oxygen permeation is still insufficient; therefore, intensive research focuses on boosting oxygen permeation. Here, we present a novel dual-phase membrane composed of an ion-conducting fluorite phase (Ce0.8Tb0.2O2-delta, CTO) and an electronic-conducting spinel phase (Co2MnO4, CMO). CMO spinel exhibits high electronic conductivity (60 Scm(-1) at 800 degrees C) compared to other spinels used in dual-phase membranes, i.e., 230 times higher than that of NiFe2O4 (NFO). This higher conductivity ameliorates gas-solid surface exchange and bulk diffusion mechanisms. By activating the bulk membrane with a CMO/CTO porous catalytic layer, it was possible to achieve an oxygen flux of 0.25 mLmin(-1)cm(-2) for the 40CMO/60CTO (%(vol)), 680 mu m-thick membrane at 850 degrees C even under CO2-rich environments. This dual-phase membrane shows excellent potential as an oxygen transport membrane or oxygen electrode under high CO2 and oxycombustion operation., Financial support by the Spanish Ministry of Science and (PID2022-139663OB-I00 and CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) by MCIN with funding from NextGenerationEU (PRTR-C17.I1) within the Planes Complementarios con CCAA (Area of Green Hydrogen and Energy) and it has been carried out in the CSIC Interdisciplinary Thematic Platform (PTI+) Transicion Energetica Sostenible+ (PTI-TRANSENER+). Also, the Universitat Politecnica de Valencia (UPV) is gratefully acknowledged. The authors would like to thank Dr. J. L. Jorda for the help with XRD. In addition, the support of the Servicio de Microscopia Electronica of the UPV is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Redox-Stable Electrodes for Ethane Dehydrogenation Based on Proton Ceramic Electrochemical Reactors

  • Barrio-Querol, Elena
  • Catalán-Martínez, David
  • Leonard, Kwati
  • Almar-Liante, Laura|||0000-0001-5103-3812
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
[EN] Ethylene is one of the most widely used components in the chemical industry, but the main manufacturing route involves significant energy consumption and generates substantial CO2 emissions. Proton ceramic electrochemical reactors (PCERs) offer great potential for process intensification and could play a key role in ethane dehydrogenation (EDH) by extracting H-2 produced during the reaction. This process not only improves the reaction yield but also enables the production of a pure separated H-2 stream. However, nonoxidative EDH reaction conditions lead to coke formation, which is further increased by H-2 extraction, resulting in a decrease in system performance. Therefore, to successfully integrate PCER technology into ethylene production, it is crucial to develop stable redox electrodes that can withstand both nonoxidative H-2 extraction and coke oxidation conditions. In this work, we study different composite electrodes based on the perovskite La0.8Sr0.2Cr0.5Mn0.5O3-delta (LSCM) combined with the proton conductor BaCe0.55Zr0.3Y0.15O3-delta (BCZY(5515)). The electrochemical performance was characterized by using electrochemical impedance spectroscopy under both oxidizing and reducing conditions. The data analysis indicates that surface processes limit electrode operation. The infiltration of Pt and CeO2 nanoparticles in the electrode enhanced the electrochemical performance, improving it by a factor of 10 at 700 degrees C. The optimal electrochemical performance was observed for the LSCMF/BCZY(5515) (La0.8Sr0.2Cr0.5Mn0.25Fe0.25O3-delta/BaCe0.55Zr0.3Y0.15O3-delta) electrode infiltrated with Pt/CeO2, demonstrating promising properties as a redox-stable electrode. Finally, we evaluated the nonoxidative EDH reaction using a PCER based on a Ni-SrZr0.5Ce0.4Y0.1O2.95 (SZCY541) supported cell with a LSCMF/BCZY(5515) anode infiltrated with Pt/CeO2 and a thin BaZr0.44Ce0.36Y0.2O3-delta electrolyte., This work is part of the WINNER project that has received funding from the Fuel Cell and Hydrogen 2 Joint Undertaking under grant agreement no 101007165. This Joint Undertaking received support from the European Union's Horizon 2020 Research and Innovation programme, Hydrogen Europe and Hydrogen Europe Research. Financial support by the Spanish Ministry of Science and Innovation (PID2022-139663OB-100 and CEX2021-001230-S grants funded by MCIN/AEI/10.13039/501100011033) and by the Generalitat Valenciana (CIACIF/2021/199 and CIPROM/2022/10 grants) is gratefully acknowledged. Also, the authors acknowledge the support of the Servicio de Microscopia Electronica of the Universitat Politecnica de Valencia (UPV).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Impact of Phase-Separated Janus-Type Formation on the Reversibility of Multicomponent Exsolved Nanoparticles from Complex Perovskites

  • Delgado-Galicia, Blanca|||0009-0004-4655-5789
  • López-García, Andrés
  • Almar-Liante, Laura|||0000-0001-5103-3812
  • Carrillo-Del Teso, Alfonso Juan
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Jimenez, Catalina Elena
  • Suarez-Anzorena, Rosario
  • Bar, Marcus
  • Perez-Dieste, Virginia
  • Aguadero, Ainara
  • Alonso, Jose A.
  • Puente-Orench, Ines
[EN] Solid oxide electrochemical cells (SOCs) benefit from exsolution-based electrocatalyst design, where nanoparticles anchored in perovskites enhance stability and activity. Two of the most transformative features of this technology are the ability to engineer multielemental alloy nanoparticles for tailored catalysis and the potential for in situ catalyst regeneration through redox-driven redissolution. However, the fundamental mechanisms governing these processes in complex, multicomponent systems remain poorly understood. In this work, the simultaneous exsolution of Fe, Ni, Co, and Cu from the fuel electrode material Sr2Fe1.2Co0.1Ni0.1Cu0.1Mo0.5O6-delta was investigated using in situ powder neutron diffraction and synchrotron-based near-ambient-pressure X-ray photoelectron spectroscopy (NAP-XPS), combined with advanced electron microscopy to capture morphological evolution. At 700 degrees C, Cu-rich nanoparticles dominate, consistent with Ellingham reducibility trends; however, higher temperatures favor the formation of Fe-enriched alloys, driven by the high availability of Fe cations. Conversely, prolonged reduction promotes the formation of phase-separated Janus-type nanoparticles, primarily due to Fe-Cu immiscibility. Interestingly, redox cycling tests revealed that nanoparticle composition dictates redissolution capacity. While homogeneous alloys exhibited total redissolution into the perovskite backbone and subsequent re-exsolution, Janus-type nanoparticles underwent irreversible transformation into pyramidal NiO nanoparticles via intermediate cubic mixed oxide structures during air exposure. These findings elucidate how temperature, time, and elemental composition govern exsolved nanoparticle chemistry, morphology, and regeneration, establishing design principles for inducing multimetal exsolution in complex oxides toward enhanced electrocatalytic performance in energy conversion technologies., Financial support by Generalitat Valenciana (CIPROM/2022/10) and by the Spanish Ministry of Science and Innovation (PID2022-139663OB-100 and CEX2021-001230-S) is gratefully acknowledged. These grants were funded by MCIN/AEI/10.13039/501100011033. We thank the financial support of the Helmholtz Initiative and Networking Fund through the German Federal Ministry of Education and Research (Bundesministerium fur Bildung und Forschung, BMBF) under Grant No. 03EW0015B (CatLab). These experiments were performed at BL24-CIRCE (proposal number 2024088545) beamlines at ALBA Synchrotron with the collaboration of ALBA staff. The authors wish to express their gratitude to the Institut Laue-Langevin (ILL) and the staff at D1B for making all facilities available for neutron diffraction experiments (Experiment No.CRG-2991). We thank the support of the Electronic Microscopy Service of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Maximizing oxygen permeation via catalytic functionalization under oxyfuel conditions

  • Almar-Liante, Laura|||0000-0001-5103-3812
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Garcia-Fayos, Julio
  • Ruhl, Rian
  • Navarrete Algaba, Laura
  • Laqdiem-Marin, Marwan
  • Joo, Jong Hoon
  • Bouwmeester, Henny J. M.
[EN] Oxygen transport membranes (OTMs) offer a promising route for high-efficiency, cost-effective oxygen supply in energy and chemical industries, with the potential to significantly reduce CO2 and NOx emissions when integrated into oxy-combustion processes. However, conventional OTMs suffer from poor chemical stability in CO2-rich environments, prompting the development of dual-phase membranes that, while more stable, typically exhibit lower oxygen permeation rates. In this study, we address this limitation by enhancing the surface exchange kinetics of Fe2NiO4-Ce0.8Tb0.2O2-delta (NFO-CTO) membranes by surface modification with various oxygen oxidation-reduction reaction (OORR) catalysts, including Ce, Pr, Sm, Tb, Co, Nb, Zr, and Al oxides, and Pr-based binary oxides. Comprehensive characterization using electrochemical impedance spectroscopy, oxygen isotopic exchange, and gas permeation measurements revealed a substantial improvement in surface reaction kinetics. Catalyst activation led to a six-fold increase in oxygen flux under standard conditions and up to a 2.5-fold enhancement under harsh environments containing CO2 and SO2 at 850 degrees C, mimicking oxyfuel combustion conditions. This work demonstrates that rational catalyst selection and integration can overcome fundamental surface limitations in dual-phase membranes, offering a viable strategy to advance oxygen separation technologies for sustainable energy applications., Financial support from the Spanish Government (PID2022-139663OB-100 and CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) and the Generalitat Valenciana (CIPROM/2022/10) is also acknowledged. Financial support by the EU through FP7 GREEN-CC Project (Grant Agreement Number: 608524). We thank the support of the Electronic Microscopy Service of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modulating redox properties of solid-state ion-conducting materials using microwave irradiation

  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Santos-Blasco, Joaquín
  • García-Baños, Beatriz|||0000-0001-7862-3417
  • Plaza González, Pedro José|||0000-0002-2623-0782
  • Penaranda-Foix, Felipe L.|||0000-0003-4012-0763
  • Domínguez-Saldaña, Aitor|||0000-0001-7539-7493
  • Catalá Civera, José Manuel|||0000-0002-0617-1762
  • Borrás-Morell, J. F.
  • Catalán-Martínez, David
  • Navarrete Algaba, Laura
[EN] The industrial adoption of low-carbon technologies and renewable electricity requires novel tools for electrifying unitary steps and efficient energy storage, such as the catalytic synthesis of valuable chemical carriers. The recently-discovered use of microwaves as an effective reducing agent of solid materials provides a novel framework to improve this chemical-conversion route, thanks to promoting oxygen-vacancy formation and O-2-surface exchange at low temperatures. However, many efforts are still required to boost the redox properties and process efficiency. Here, we scrutinise the dynamics and the physicochemical dependencies governing microwave-induced redox transformations on solid-state ion-conducting materials. The reduction is triggered upon a material-dependent induction temperature, leading to a characteristically abrupt rise in electric conductivity. This work reveals that the released O-2 yield strongly depends on the material's composition and can be tuned by controlling the gas-environment composition and the intensity of the microwave power. The reduction effect prevails at the grain surface level and, thus, amplifies for fine-grained materials, and this is ascribed to limitations in oxygen-vacancy diffusion across the grain compared to a microwave-enhanced surface evacuation. The precise cyclability and stability of the redox process will enable multiple applications like gas depuration, energy storage, or hydrogen generation in several industrial applications., This study forms part of the MFA programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana. Financial support by the Spanish Ministry of Science and Innovation (PID2022-139663OB-100 and CEX2021-001230-S grants funded by MCIN/AEI/10.13039/501100011033, and "Ramon y Cajal" Fellowship RYC2021-033889-I), and the Universitat Politecnica de Valencia (UPV) are gratefully acknowledged. Also, we acknowledge the support of the Servicio de Microscopia Electronica of the UPV.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrifying Ba0.5Sr0.5Co0.8Fe0.2O3-δ, for focalized heating in oxygen transport membranes

  • Laqdiem-Marin, Marwan
  • García-Fayos, Julio
  • Catalán-Martínez, David
  • Almar-Liante, Laura|||0000-0001-5103-3812
  • Carrillo-Del Teso, Alfonso Juan
  • Represa-Bullido, Álvaro
  • López Nieto, José Manuel|||0000-0002-6960-3219
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Industry decarbonization requires the development of highly efficient and flexible technologies relying on renewable energy resources, especially biomass and solar/wind electricity. In the case of pure oxygen production, oxygen transport membranes (OTMs) appear as an alternative technology for the cryogenic distillation of air, the industrially-established process of producing oxygen. Moreover, OTMs could provide oxygen from different sources (air, water, CO2, etc.), and they are more flexible in adapting to current processes, producing oxygen at 700-1000 degrees C. Furthermore, OTMs can be integrated into catalytic membrane reactors, providing new pathways for different processes. The first part of this study was focused on electrification on a traditional OTM material (Ba(0.5)Sr(0.5)Co(0.8)Fe(0.2)O3(-delta)), imposing different electric currents/voltages along a capillary membrane. Thanks to the emerging Joule effect, the membrane-surface temperature and the associated O-2 permeation flux could be adjusted. Here, the OTM is electrically and locally heated and reaches 900 degrees C on the surface, whereas the surrounding of the membrane was maintained at 650 degrees C The O-2 permeation flux reached for the electrified membranes was similar to 3.7 NmL. min(-1) cm(2), corresponding to the flux obtained with an OTM non-electrified at 900 degrees C. The influence of depositing a porous Ce0.8Tb0.2O2-delta catalytic/protective layer on the outer membrane surface revealed that lower surface temperatures (830 degrees C) were detected at the same imposed electric power. Finally, the electrification concept was demonstrated in a catalytic membrane reactor (CMR) where the oxidative dehydrogenation of ethane (ODHE) was carried out. ODHE reaction is very sensitive to temperature, and here, we demonstrate an improvement of the ethylene yield by reaching moderate temperatures in the reaction chamber while the O-2 injection into the reaction can be easily fine-tuned., Financial support by the Spanish Ministry of Science (PID2022-139663OB-I00 and CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) and with funding from NextGenerationEU (PRTR-C17.I1) within the Planes Complementarios con CCAA (Area of Green Hydrogen and Energy) and it has been carried out in the CSIC Interdisciplinary Thematic Platform (PTI+) Transición Energética Sostenible+ (PTI-TRANSENER+), and the Universitat Politècnica de València (UPV) is gratefully acknowledged. Also, we acknowledge the support of the Servicio de Microscopía Elcectronica of the UPV.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Recent Progress on Redox Materials for High Temperature Thermochemical Heat Storage

  • Carrillo-Del Teso, Alfonso Juan
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Thermal energy storage based on gas¿solid reversible chemical reactions offers higher-energy storage densities than commercially implemented sensible heatstorage systems. Despite the promise, it is a much less mature technology, and several aspects still require further improvement. Among the wide variety of reversible thermochemical reactions that show potential for thermal energy storage, reduction¿oxidation reactions of metal oxides are promising since air can be employed as reactant without the need of costly pressurized storage units. In this perspective, the fundamental aspects of metal oxides for redox thermochemical heat storage are explored, paying special attention to the latest developments that will assure high energy-storage density and multicycle stability. The design of more efficient redox materials remains a key aspect in thermochemical heat storage; however, the development of high-temperature reactors and their implementation in concentrated solar power plants also plays an important role in the advancement of this technology. All these interrelated elements together with techno-economic assessments, a paramount tool in terms of materials choice, are also discussed., Financial support by Generalitat Valenciana (grant no. CIPROM/2022/10) and by the Spanish Ministry of Science and Innovation (grant nos. PID2022-139663OB-100 and CEX2021-001230-S) grants funded by MCIN/AEI/10.13039/501100011033 is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Microwave-Driven Exsolution of Ni Nanoparticles in A-Site Deficient Perovskites

  • López-García, Andrés
  • Domínguez-Saldaña, Aitor|||0000-0001-7539-7493
  • Carrillo-Del Teso, Alfonso Juan
  • García-Baños, Beatriz|||0000-0001-7862-3417
  • Plaza González, Pedro José|||0000-0002-2623-0782
  • Catalá Civera, José Manuel|||0000-0002-0617-1762
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Navarrete Algaba, Laura
  • Valls-Esteve, María Inmaculada
[EN] Exsolution has emerged as a promising method for generating metallic nanoparticles, whose robustness and stability outperform those of more conventional deposition methods, such as impregnation. In general, exsolution involves the migration of transition metal cations, typically perovskites, under reducing conditions, leading to the nucleation of well-anchored metallic nanoparticles on the oxide surface with particular properties. There is growing interest in exploring alternative methods for exsolution that do not rely on high-temperature reduction via hydrogen. For example, utilizing electrochemical potentials or plasma technologies has shown promising results in terms of faster exsolution, leading to better dispersion of nanoparticles under milder conditions. To avoid limitations in scaling up exhibited by electrochemical cells and plasma-generation devices, we proposed a method based on pulsed microwave (MW) radiation to drive the exsolution of metallic nanoparticles. Here, we demonstrate the H-2-free MW-driven exsolution of Ni nanoparticles from lanthanum strontium titanates, characterizing the mechanism that provides control over nanoparticle size and dispersion and enhanced catalytic activity and stability for CO2 hydrogenation. The presented method will enable the production of metallic nanoparticles with a high potential for scalability, requiring short exposure times and low temperatures., The project that gave rise to these results received the supportof a fellowship from the La Caixa Foundation (Grant100010434). The fellowship code is LCF/BQ/PI20/11760015. This study forms part of the MFA program andwas supported by MCIN with funding from European UnionNextGenerationEU (Grant PRTR-C17.I1) and by GeneralitatValenciana. Financial support by the Spanish Ministry ofScience and Innovation (Grants PID2022-139663OB-100 andCEX2021-001230-S funded by MCIN/AEI/10.13039/501100011033). Also, we acknowledge the support of theServicio de Microscopía Electrónica of the UniversitatPolite&#768;cnica de Vale&#768; ncia (UPV).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Redox-Acidity Interplay in Eu-Promoted PtSn2 Catalysts for Selective and Stable Propane Dehydrogenation

  • Valls, Maria I.
  • Ara, Jesús
  • Catalán-Martínez, David
  • Grand, Julien
  • Mayer, J
  • Somacescu, Simona
  • Curulla-Ferré, Daniel
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Remiro-Buenamañana, Sonia|||0000-0002-5393-5729
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Heterogeneous catalysts based on Pt alloys are widely employed in propane dehydrogenation (PDH), yet challenges such as coking and poor nanoparticle stability hinder their broader industrial deployment. Strategies to enhance dispersion and tune the catalyst surface properties remain at the forefront of catalyst design. Here, we demonstrate a new class of PtSn2-based catalysts promoted by rare-earth elements for efficient and stable PDH. Among the rare-earth screened, europium (Eu) delivers the most pronounced promotional effect, enabling the formation of similar to 1.3 nm PtSn2 nanoparticles with improved thermal stability. Through its redox flexibility (Eu3+/Eu2+), Eu modulates the electronic environment of Pt, tunes surface acidity, and suppresses coke accumulation by directing carbon species away from active sites and onto the support. This work shows that rare-earth elements can serve as multifunctional promoters in alloy catalysts, influencing both structural dispersion and catalytic surface chemistry. The optimized catalyst (0.5% Pt-3% Sn-2% Eu on gamma-Al2O3) achieves a 40.6% propylene yield at 575 degrees C and a low deactivation rate (0.047 h-1), under conditions relevant to industrial practice. Our findings offer a new strategy for designing high-performance diluted alloy catalysts through rare-earth promotion, applicable to other dehydrogenation and hydrocarbon upgrading reactions where coke suppression and acid-base balance are critical., This work has been performed as part of a Joint Research Agreement between Total Energies OneTech Belgium (ref. IPA-6416). Financial support by Generalitat Valenciana(CIACIF/2021/199 and CIPROM/2022/10) and by the Spanish Ministry of Science and Innovation (PID2022-139663OB-100, FPU20/06919, and CEX2021-001230-S grants funded by MCIN/AEI/10.13039/501100011033) is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Direct electrocatalytic CO2 reduction in a pressurized tubular protonic membrane reactor

  • Quina-García, Imanol
  • Almar-Liante, Laura|||0000-0001-5103-3812
  • MARTINEZ FELIU, AGUSTIN|||0000-0002-9974-1567
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Catalán-Martínez, David
  • Dayaghi, Amir Masoud
  • Norby, Truls
[EN] Power-to-methane technology enables storage of renewable elec-tricity in chemical energy, which can be transported and converted us-ing existing infrastructure. The moderate energy efficiency of this pro-cess is associated with high reactor exothermicity and complex thermal integration. Proton-ceramic electrochemical cells (PCECs) enable ther-mal combination of methanation and electrochemically driven H2 steps via endothermic reactions, boosting energy efficiency and heat man-agement. Here, we report single-step methane production from CO2 in a tubular PCEC at 450 degrees C and less than 30 bar. The H2 reactant is sup-plied by electrochemical pumping of protons from H2 in the external chamber. The electrochemical cell consists of an -25-mm-thick electro-lyte (BaZr0.8Ce0.1Y0.1O3-8) supported on a BaZr0.8Ce0.1Y0.1O3-8/Ni com-posite acting as a methanation catalyst. The reaction was studied as a function of total pressure, H2/CO2 ratio, and current density, reaching CH4 yields greater than 99% above 20 bar. High pressure and a CO2- rich atmosphere ameliorated the electrochemical behavior because of higher electrolyte hydration and boosted electrode kinetics., This study has received European Union Horizon 2020 Research and Innovation funding under grant agreement 838077 (eCOCO2 project) and financial support from the Spanish Government (PID2022-139663OB-I00, PRE2019-090959, and CEX2021-001230-S funded by MCIN/AEI/10.13039/501100011033) and MCIN with funding from NextGenerationEU (PRTR-C17.I1) within the Planes Complementarios con CCAA (Area of Green Hydrogen and Energy) and was carried out in the CSIC Interdisciplinary Thematic Platform (PTI+) Transicion Energetica Sostenible+ (PTI-TRANSENER+). Support from Camilla Vigen (CoorsTek Membrane Sciences) with manufacture of tubular cells is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Squeezing Out Nanoparticles from Perovskites: Controlling Exsolution with Pressure

  • López-García, Andrés
  • Remiro-Buenamañana, Sonia|||0000-0002-5393-5729
  • Carrillo-Del Teso, Alfonso Juan
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Neagu, Dragos
[EN] Nanoparticle exsolution has emerged as a versatile method to functionalize oxides with robust metallic nanoparticles for catalytic and energy applications. By modifying certain external parameters during thermal reduction (temperature, time, reducing gas), some morphological and/or compositional properties of the exsolved nanoparticles can be tuned. Here, it is shown how the application of high pressure (<100 bar H2) enables the control of the exsolution of ternary FeCoNi alloyed nanoparticles from a double perovskite. H2 pressure affects the lattice expansion and the nanoparticle characteristics (size, population, and composition). The composition of the alloyed nanoparticles could be controlled, showing a reversal of the expected thermodynamic trend at 10 and 50 bar, where Fe becomes the main component instead of Ni. In addition, pressure drastically lowers the exsolution temperature to 300 degrees C, resulting in unprecedented highly-dispersed and small-sized nanoparticles with a similar composition to those obtained at 600 degrees C and 10 bar. The mechanisms behind the effects of pressure on exsolution are discussed, involving kinetic, surface thermodynamics, and lattice-strain factors. A volcano-like trend of the exsolution extent suggests that competing pressure-dependent mechanisms govern the process. Pressure emerges as a new design tool for metallic nanoparticle exsolution enabling novel nanocatalysts and surface-functionalized materials., The project that gave rise to these results received the support of a fellowship from the "la Caixa" Foundation (ID 100010434). The fellowship code is LCF/BQ/PI20/11760015. Financial support by the Spanish Ministry of Science and Innovation (PID2022-139663OB-I00 and CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) and by Generalitat Valenciana (CIPROM/2022/10) is gratefully acknowledged. The authors thank the support of the Electronic Microscopy Service of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

New trends in nanoparticle exsolution

  • Carrillo-Del Teso, Alfonso Juan
  • López-García, Andrés
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Delgado-Galicia, Blanca
[EN] Many relevant high-temperature chemical processes require the use of oxide-supported metallic nanocatalysts. The harsh conditions under which these processes operate can trigger catalyst degradation via nanoparticle sintering, carbon depositions or poisoning, among others. This primarily affects metallic nanoparticles created via deposition methods with low metal-support interaction. In this respect, nanoparticle exsolution has emerged as a promising method for fabricating oxide-supported nanocatalysts with high interaction between the metal and the oxide support. This is due to the mechanism involved in nanoparticle exsolution, which is based on the migration of metal cations in the oxide support to its surface, where they nucleate and grow as metallic nanoparticles partially embedded in the oxide. This anchorage confers high robustness against sintering or coking-related problems. For these reasons, exsolution has attracted great interest in the last few years. Multiple works have been devoted to proving the high catalytic stability of exsolved metallic nanoparticles in several applications for high-temperature energy storage and conversion. Additionally, considerable attention has been directed towards understanding the underlying mechanism of metallic nanoparticle exsolution. However, this growing field has not been limited to these types of studies and recent discoveries at the forefront of materials design have opened new research avenues. In this work, we define six new trends in nanoparticle exsolution, taking a tour through the most important advances that have been recently reported.; This article reviews the most promising trends in nanoparticle exsolution, a versatile fabrication route for highly efficient and robust nanocatalysts., The project that gave rise to these results received the support of a fellowship from the "la Caixa" Foundation (ID 100010434). The fellowship code is LCF/BQ/PI20/11760015. Financial support by the Spanish Ministry of Science and Innovation (PID2022-139663OB-100 and CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) and by Generalitat Valenciana (CIPROM/2022/10) is gratefully acknowledged. Blanca Delgado-Galicia acknowledges the funding provided by the SECAT Grants Program for the Completion of Master's Thesis in Catalysis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Application of catalytic ozonation using Y zeolite in the elimination of pharmaceuticals in effluents from municipal wastewater treatment plants

  • Prada-Vásquez, María A.
  • Simarro-Gimeno, Claudia
  • Vidal-Barreiro, Isabel
  • Cardona-Gallo, Santiago A.
  • Pitarch, Elena
  • Hernández, Félix
  • Torres-Palma, Ricardo A.
  • Chica, Antonio
  • Navarro-Laboulais, J.|||0000-0001-6347-5407
[EN] Catalytic ozonation using faujasite-type Y zeolite with two different SiO 2 /Al 2 O 3 molar ratios (60 and 12) was evaluated for the first time in the removal of 25 pharmaceutical compounds (PhCs) present in real effluents from two municipal wastewater treatment plants both located in the Mediterranean coast of Spain. Additionally, control experiments including adsorption and direct ozonation, were conducted to better understand the fundamental aspects of the different individual systems in wastewater samples. Commercial zeolites were used in sodium form (NaY). The results showed that the simultaneous use of ozone and NaY zeolites significantly, The authors thank Instituto de Tecnologia Quimica (ITQ), Consejo Superior de Investigaciones Cientificas (CSIC), and Universitat Politecnica de Valencia (UPV) for the facilities and financial support and University of Jaume I for the use of LC-MS/MS instrumentation. Financial support by the Spanish Ministry of Science and Innovation (PID2021-127451OB-I00, PID2022-139663OB-100 and CEX2021- 001230-S grants funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe) and by Generalitat Valenciana (CIPROM/2022/10 grant) is acknowledged.The financial support of University Jaume I (project UJI-B2022-16) is also acknowledged. M. A. Prada-Vasquez thanks MINCIENCIAS COLOMBIA for his PhD fellowship (Convocation 785-2017) .r improved the micropollutants degradation rate, able to degrade 95 % of the total mixture of PhCs within the early 9 min using the zeolite NaY-12 (24.4 mg O 3 L-1 consumed) , while 12 min of reaction with the zeolite NaY-60 (31 mg O 3 L-1 consumed) . In the case of individual experiments, ozonation removed 95 % of the total mixture of PhCs after 25 min (46.2 mg O 3 L-1 consumed) , while the direct adsorption, after 60 min of contact time, eliminated 30 % and 44 % using the NaY-12 and NaY-60 zeolites, respectively. Results showed that the Br & oslash; nsted acid sites seemed to play an important role in the effectiveness of the treatment with ozone. Finally, the envi-ronmental assessment showed that the total risk quotients of pharmaceuticals were reduced between 87 % - 99 % after ozonation in the presence of NaY-60 and NaY-12 zeolites. The results of this study demonstrate that cat-alytic ozonation using NaY zeolites as catalysts is a promising alternative for micropollutant elimination in real-world wastewater matrices.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Understanding the evolution of ternary alloyed nanoparticles during reversible exsolution from double perovskite oxides

  • López-García, Andrés
  • Carrillo-Del Teso, Alfonso Juan
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Jiménez, Catalina Elena
  • Suarez Anzorena, Rosario
  • Garcia-Diez, Raul
  • Pérez-Dieste, Virginia
  • Villar-García, Ignacio J.
  • Hungría, Ana B.
  • Bar, Marcus
[EN] Multicomponent nanoparticle exsolution has emerged as a promising process for obtaining highly active catalysts supported on perovskite oxides. For instance, FeCoNi alloys can be exsolved from Sr2FeCo0.2Ni0.2Mn0.1Mo0.5O6-delta, boosting the electrocatalytic properties of these electrodes. However, due to differences in cation diffusion properties, the composition of the nanoparticles is uneven and strongly affected by process conditions such as temperature. An additional key feature of exsolution is its reversibility, which could help in catalyst regeneration if poisoned. Nevertheless, there is little knowledge on the reversibility mechanisms of multicomponent exsolved alloys. For that purpose, a combination of synchrotron-based in situ X-ray Diffraction (XRD) and Near-Ambient Pressure X-ray Photoelectron Spectroscopy (NAP-XPS) was employed in this work to uncover these missing aspects of multicomponent alloyed exsolution. These techniques allowed determination of the crystallographic and surface-related phenomena occurring during reversible exsolution both to the nanoparticles and the perovskite oxide support. This enabled the identification of the exsolution onset temperature and the range at which the double perovskite to Ruddlesden-Popper transition occurred, a process that has notable implications for the electrocatalytic performance. Finally, in combination with microscopy analyses, it was possible to reveal the morphological and compositional changes that the exsolved nanoparticles experienced upon reduction-oxidation cycles. This resulted in a re-arrangement of the surface species and a variation in the composition (Fe enrichment) of the regenerated ternary alloyed exsolved nanoparticles. These results indicate that reversible exsolution might alter the catalytic properties of the exsolved nanoparticles, with profound implications in the performance of (electro)catalytic processes.; This work unveils the mechanism of FeCoNi alloy reversible exsolution from double perovskites via in situ synchrotron-based NAP-XPS and time-resolved XRD., The project that gave rise to these results received the support of a fellowship from "la Caixa" Foundation (ID 100010434). The fellowship code is LCF/BQ/PI20/11760015. Financial support by Generalitat Valenciana (CIPROM/2022/10) and by the Spanish Ministry of Science and Innovation (PID2022-139663OB-100 and CEX2021-001230-S) grants funded by MCIN/AEI/10.13039/501100011033. We thank the financial support of the Helmholtz Initiative and Networking Fund through the HZB-BASF project ENERCHEM: Energiespeicherung durch Chemie. These experiments were performed at BL24-CIRCE (proposal number 2022035801) and BL04-MSPD (2022025687) beamlines at ALBA Synchrotron with the collaboration of ALBA staff. The authors thank Alexander Missyul for the help with setting up the in situ XRD experiments and Elena Vicente for the support on the NAP-XPS experimental campaign. Authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node "Division de Microscopia Electronica" at Universidad de Cadiz and project PID2022-142312NB-I00. We thank the support of the Electronic Microscopy Service of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Microwave-Enhanced Methane Decomposition over Promoted Carbon Catalysts for Sustainable Hydrogen and Carbon Nanomaterial Production

  • Domínguez-Saldaña, Aitor|||0000-0001-7539-7493
  • Bacete-Barchín, Lucía
  • Carrillo-Del Teso, Alfonso Juan
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • López-García, Andrés
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • García-Baños, Beatriz|||0000-0001-7862-3417
  • Gutiérrez Cano, José Daniel
  • Catalá Civera, José Manuel|||0000-0002-0617-1762
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Methane decomposition is emerging as a critical technology for producing CO2-free H2, a cornerstone for the deep decarbonization of energy systems. Electrifying this process through microwave-assisted catalysis introduces a transformative sustainability advantage by enabling direct, selective energy delivery to the catalyst, minimizing thermal inefficiencies, and unlocking compatibility with renewable electricity. Here, we demonstrate that activated carbon catalysts under microwave irradiation achieve efficient methane activation at temperatures far below those required in conventional thermal systems. At 500 degrees C, methane conversion reached 80% with complete selectivity toward hydrogen, revealing a strong microwave-carbon synergy that accelerates reaction kinetics. The resulting carbon deposits exhibited tunable morphologies, ranging from amorphous coatings to nanocubes and nanofibers. By controlling the operating conditions, microwave-assisted methane decomposition enabled the simultaneous production of functional carbon nanomaterials. The catalytic performance was further enhanced by earth-abundant metal promoters: alkali metals improved catalyst stability and hydrogen desorption, while Fe delivered the highest conversions and directed the growth of thin graphitic layers on nanoparticles and the carbon support. When benchmarked against conventional thermal decomposition, the Fe/C catalyst exhibited a boost in methane conversion from similar to 50 to similar to 75% when operated under microwave irradiation, highlighting the benefits of this operation. These findings establish microwave-driven methane decomposition as a platform for low-temperature, electrified hydrogen production coupled with precision synthesis of carbon nanostructures, advancing scalable, sustainable catalytic processes for H2 production based on inexpensive, widely available materials., Funded by the Aid for First Research Projects (PAID-06-24), Vice-Rectorate for Research of the Universitat Politecnica de Valencia (UPV). Financial support by the Spanish Ministry of Science and Innovation and European Union (TED2021-132590B-C22/AEI/10.13039/501100011033/ and NextGenerationEU/PRTR, PID2022-139663OB-100, and CEX2021-001230-S grants funded by MCIN/AEI/10.13039/501100011033, "Ramon y Cajal" Fellowship RYC2021-033889-I). Also, we acknowledge the support of the Servicio de Microscopia Electronica of the UPV.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Understanding the evolution of ternary alloyed nanoparticles during reversible exsolution from double perovskite oxides

  • López García, Andrés
  • Carrillo, Alfonso J.
  • Jiménez, Catalina Elena
  • Suarez Anzorena, Rosario
  • García Diez, Raúl
  • Pérez Dieste, Virginia
  • Villar García, Ignacio J.
  • Hungría Hernández, Ana Belén
  • Bár, Marcus
  • Serra, José M.
Multicomponent nanoparticle exsolution has emerged as a promising process for obtaining highly active catalysts supported on perovskite oxides. For instance, FeCoNi alloys can be exsolved from Sr2FeCo0.2Ni0.2Mn0.1Mo0.5O6−d, boosting the electrocatalytic properties of these electrodes. However, due to differences incationdiffusion properties, the composition of the nanoparticles is uneven and strongly affected by process conditions such as temperature. An additional key feature of exsolution is its reversibility, which could help in catalyst regeneration if poisoned. Nevertheless, there is little knowledge on the reversibility mechanisms of multicomponent exsolved alloys. For that purpose, a combination of synchrotron-based in situ X-ray Diffraction (XRD) and Near-Ambient Pressure X-ray Photoelectron Spectroscopy (NAP-XPS) was employed in this work to uncover these missing aspects of multicomponent alloyed exsolution. These techniques allowed determination of the crystallographic and surface-related phenomena occurring during reversible exsolution both to the nanoparticles and the perovskite oxide support. This enabled the identification of the exsolution onset temperature and the range at which the double perovskite to Ruddlesden–Popper transition occurred, a process that has notable implications for the electrocatalytic performance. Finally, in combination with microscopy analyses, it was possible to reveal the morphological and compositional changes that the exsolvednanoparticlesexperiencedupon reductionoxidation cycles. This resulted in a re-arrangement of the surface species and a variation in the composition (Fe enrichment) of the regenerated ternary alloyed exsolved nanoparticles. These results indicate that reversible exsolution might alter the catalytic properties of the exsolved nanoparticles, with profound implications in the performance of (electro)catalytic processes.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct electrocatalytic CO2 reduction in a pressurized tubular protonic membrane reactor

  • Quina, Imanol
  • Almar, Laura
  • Catalán-Martínez, David
  • Dayaghi, Amir Masoud
  • Martínez, Agustín
  • Norby, Truls
  • Escolástico Rozalén, Sonia
  • Serra Alfaro, José Manuel
Power-to-methane technology enables storage of renewable electricity in chemical energy, which can be transported and converted using existing infrastructure. The moderate energy efficiency of this process is associated with high reactor exothermicity and complex thermal integration. Proton-ceramic electrochemical cells (PCECs) enable thermal combination of methanation and electrochemically driven H steps via endothermic reactions, boosting energy efficiency and heat management. Here, we report single-step methane production from CO in a tubular PCEC at 450°C and less than 30 bar. The H reactant is supplied by electrochemical pumping of protons from H in the external chamber. The electrochemical cell consists of an ∼25-μm-thick electrolyte (BaZrCeYO) supported on a BaZrCeYO/Ni composite acting as a methanation catalyst. The reaction was studied as a function of total pressure, H/CO ratio, and current density, reaching CH yields greater than 99% above 20 bar. High pressure and a CO-rich atmosphere ameliorated the electrochemical behavior because of higher electrolyte hydration and boosted electrode kinetics., This study has received European Union Horizon 2020 Research and Innovation funding under grant agreement 838077 (eCOCO2 project) and financial support from the Spanish Government (PID2022-139663OB-I00, PRE2019-090959, and CEX2021-001230-S funded by MCIN/AEI/10.13039/501100011033) and MCIN with funding from NextGenerationEU (PRTR-C17.I1) within the Planes Complementarios con CCAA (Area of Green Hydrogen and Energy) and was carried out in the CSIC Interdisciplinary Thematic Platform (PTI+) Transición Energética Sostenible+ (PTI-TRANSENER+). Support from Camilla Vigen (CoorsTek Membrane Sciences) with manufacture of tubular cells is gratefully acknowledged., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001230-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microwave-Driven Exsolution of Ni Nanoparticles in A-Site Deficient Perovskites

  • López-García, Andrés
  • Domínguez-Saldaña, Aitor
  • Carrillo, Alfonso J.
  • Navarrete, L.
  • Valls, Maria I.
  • García-Baños, Beatriz
  • Plaza-Gonzalez, Pedro J.
  • Catalá-Civera, José M.
  • Serra Alfaro, José Manuel
Exsolution has emerged as a promising method for generating metallic nanoparticles, whose robustness and stability outperform those of more conventional deposition methods, such as impregnation. In general, exsolution involves the migration of transition metal cations, typically perovskites, under reducing conditions, leading to the nucleation of well-anchored metallic nanoparticles on the oxide surface with particular properties. There is growing interest in exploring alternative methods for exsolution that do not rely on high-temperature reduction via hydrogen. For example, utilizing electrochemical potentials or plasma technologies has shown promising results in terms of faster exsolution, leading to better dispersion of nanoparticles under milder conditions. To avoid limitations in scaling up exhibited by electrochemical cells and plasma-generation devices, we proposed a method based on pulsed microwave (MW) radiation to drive the exsolution of metallic nanoparticles. Here, we demonstrate the H-free MW-driven exsolution of Ni nanoparticles from lanthanum strontium titanates, characterizing the mechanism that provides control over nanoparticle size and dispersion and enhanced catalytic activity and stability for CO hydrogenation. The presented method will enable the production of metallic nanoparticles with a high potential for scalability, requiring short exposure times and low temperatures., The project that gave rise to these results received the support of a fellowship from the “La Caixa” Foundation (Grant 100010434). The fellowship code is LCF/BQ/PI20/11760015. This study forms part of the MFA program and was supported by MCIN with funding from European Union NextGenerationEU (Grant PRTR-C17.I1) and by Generalitat Valenciana. Financial support by the Spanish Ministry of Science and Innovation (Grants PID2022-139663OB-100 and CEX2021-001230-S funded by MCIN/AEI/10.13039/501100011033). Also, we acknowledge the support of the Servicio de Microscopía Electrónica of the Universitat Politècnica de València (UPV)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001230-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modulating redox properties of solid-state ion-conducting materials using microwave irradiation

  • Serra Alfaro, José Manuel
  • Balaguer, María
  • Santos-Blasco, J.
  • Borras-Morell, J. F.
  • García-Baños, Beatriz
  • Plaza-Gonzalez, P.
  • Catalán-Martínez, David
  • Penaranda-Foix, F.
  • Dominguez, A.
  • Navarrete, L.
  • Catalá-Civera, José M.
The industrial adoption of low-carbon technologies and renewable electricity requires novel tools for electrifying unitary steps and efficient energy storage, such as the catalytic synthesis of valuable chemical carriers. The recently-discovered use of microwaves as an effective reducing agent of solid materials provides a novel framework to improve this chemical-conversion route, thanks to promoting oxygen-vacancy formation and O-surface exchange at low temperatures. However, many efforts are still required to boost the redox properties and process efficiency. Here, we scrutinise the dynamics and the physicochemical dependencies governing microwave-induced redox transformations on solid-state ion-conducting materials. The reduction is triggered upon a material-dependent induction temperature, leading to a characteristically abrupt rise in electric conductivity. This work reveals that the released O yield strongly depends on the material's composition and can be tuned by controlling the gas-environment composition and the intensity of the microwave power. The reduction effect prevails at the grain surface level and, thus, amplifies for fine-grained materials, and this is ascribed to limitations in oxygen-vacancy diffusion across the grain compared to a microwave-enhanced surface evacuation. The precise cyclability and stability of the redox process will enable multiple applications like gas depuration, energy storage, or hydrogen generation in several industrial applications., This study forms part of the MFA programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana. Financial support by the Spanish Ministry of Science and Innovation (PID2022-139663OB-100 and CEX2021-001230-S grants funded by MCIN/AEI/10.13039/501100011033, and “Ramon y Cajal” Fellowship RYC2021-033889-I), and the Universitat Politècnica de València (UPV) are gratefully acknowledged. Also, we acknowledge the support of the Servicio de Microscopía Electrónica of the UPV., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001230-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Co2MnO4/Ce0.8Tb0.2O2−δ Dual-Phase Membrane Material with High CO2 Stability and Enhanced Oxygen Transport for Oxycombustion Processes

  • Laqdiem, Marwan
  • García-Fayos, Julio
  • Carrillo, Alfonso J.
  • Almar, Laura
  • Balaguer, María
  • Fabuel, María
  • Serra Alfaro, José Manuel
Oxygen transport membranes (OTMs) are a promising oxygen production technology with high energy efficiency due to the potential for thermal integration. However, conventional perovskite materials of OTMs are unstable in CO atmospheres, which limits their applicability in oxycombustion processes. On the other hand, some dual-phase membranes are stable in CO and SO without permanent degradation. However, oxygen permeation is still insufficient; therefore, intensive research focuses on boosting oxygen permeation. Here, we present a novel dual-phase membrane composed of an ion-conducting fluorite phase (CeTbO, CTO) and an electronic-conducting spinel phase (CoMnO, CMO). CMO spinel exhibits high electronic conductivity (60 S·cm at 800 °C) compared to other spinels used in dual-phase membranes, i.e., 230 times higher than that of NiFeO (NFO). This higher conductivity ameliorates gas-solid surface exchange and bulk diffusion mechanisms. By activating the bulk membrane with a CMO/CTO porous catalytic layer, it was possible to achieve an oxygen flux of 0.25 mL·min·cm for the 40CMO/60CTO (%), 680 μm-thick membrane at 850 °C even under CO-rich environments. This dual-phase membrane shows excellent potential as an oxygen transport membrane or oxygen electrode under high CO and oxycombustion operation., Financial support by the Spanish Ministry of Science and (PID2022-139663OB-I00 and CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) by MCIN with funding from NextGenerationEU (PRTR-C17.I1) within the Planes Complementarios con CCAA (Area of Green Hydrogen and Energy) and it has been carried out in the CSIC Interdisciplinary Thematic Platform (PTI+) Transición Energética Sostenible+ (PTI-TRANSENER+). Also, the Universitat Politècnica de València (UPV) is gratefully acknowledged. The authors would like to thank Dr. J. L. Jordà for the help with XRD. In addition, the support of the Servicio de Microscopía Electrónica of the UPV is acknowledged., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001230-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrifying Ba0.5Sr0.5Co0.8Fe0.2O3−δ for focalized heating in oxygen transport membranes

  • Laqdiem, Marwan
  • García-Fayos, Julio
  • Almar, Laura
  • Carrillo, Alfonso J.
  • Represa, Álvaro
  • López Nieto, José Manuel
  • Escolástico Rozalén, Sonia
  • Catalán-Martínez, David
  • Serra Alfaro, José Manuel
Industry decarbonization requires the development of highly efficient and flexible technologies relying on renewable energy resources, especially biomass and solar/wind electricity. In the case of pure oxygen production, oxygen transport membranes (OTMs) appear as an alternative technology for the cryogenic distillation of air, the industrially-established process of producing oxygen. Moreover, OTMs could provide oxygen from different sources (air, water, CO, etc.), and they are more flexible in adapting to current processes, producing oxygen at 700–1000 °C. Furthermore, OTMs can be integrated into catalytic membrane reactors, providing new pathways for different processes. The first part of this study was focused on electrification on a traditional OTM material (BaSrCoFeO), imposing different electric currents/voltages along a capillary membrane. Thanks to the emerging Joule effect, the membrane-surface temperature and the associated O permeation flux could be adjusted. Here, the OTM is electrically and locally heated and reaches 900 °C on the surface, whereas the surrounding of the membrane was maintained at 650 °C. The O permeation flux reached for the electrified membranes was ∼3.7 NmL min cm, corresponding to the flux obtained with an OTM non-electrified at 900 °C. The influence of depositing a porous CeTbO catalytic/protective layer on the outer membrane surface revealed that lower surface temperatures (830 °C) were detected at the same imposed electric power. Finally, the electrification concept was demonstrated in a catalytic membrane reactor (CMR) where the oxidative dehydrogenation of ethane (ODHE) was carried out. ODHE reaction is very sensitive to temperature, and here, we demonstrate an improvement of the ethylene yield by reaching moderate temperatures in the reaction chamber while the O injection into the reaction can be easily fine-tuned., Financial support by the Spanish Ministry of Science (PID2022-139663OB-I00 and CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) and with funding from NextGenerationEU (PRTR-C17.I1) within the Planes Complementarios con CCAA (Area of Green Hydrogen and Energy) and it has been carried out in the CSIC Interdisciplinary Thematic Platform (PTI+) Transición Energética Sostenible+ (PTI-TRANSENER+), and the Universitat Politècnica de València (UPV) is gratefully acknowledged. Also, we acknowledge the support of the Servicio de Microscopía Elcectronica of the UPV.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microwave-Driven Reduction Accelerates Oxygen Exchange in Perovskite Oxides

  • Domínguez-Saldaña, Aitor
  • Carrillo, Alfonso J.
  • Balaguer Jiménez, M.
  • Navarrete Algaba, Laura
  • Santos, Joaquín
  • Catalán-Martínez, David
  • García-Baños, Beatriz
  • Plaza-Gonzalez, Pedro J.
  • Gutierrez-Cano, José D.
  • Peñaranda, Felipe
  • Catalá-Civera, José M.
  • Serra Alfaro, José Manuel
Microwave-assisted oxide reduction has emerged as a promising method to electrify chemical looping processes for renewable hydrogen production. Moreover, these thermochemical cycles can be used for thermochemical air separation, electrifying the O generation by applying microwaves in the reduction step. This approach offers an alternative to conventional cryogenic air separation, producing pure streams of O and N. The electrification by microwaves lowers the requirements for titanate perovskites (CaTiMnO), which typically demand high temperatures for thermochemical cycles. Microwave activation allows for a drastic reduction in the operation conditions of the reduction reaction, leading to unprecedentedly rapid absorption-desorption cycles (<3 min per cycle). For CaTiMnO, we achieved a cycle-averaged O production of 2.6 mL g min at 800 °C, surpassing conventional values of materials operating in the high-temperature regime. This method could significantly impact thermochemical air separation by enabling a faster oxygen absorption-desorption cycle at more moderate temperatures than those of conventionally heated processes., This study forms part of the MFA program and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana (CIPROM/2022/10). Financial support by the Spanish Ministry of Science and Innovation (PID2022-139663OB-100 and CEX2021-001230-S grants funded by MCIN/AEI/10.13039/501100011033 and “Ramon y Cajal” Fellowship RYC2021-033889-I) and the Universitat Politècnica de València (UPV) is gratefully acknowledged. Also, we acknowledge the support of the Servicio de Microscopía Electrónica of the UPV.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

New trends in nanoparticle exsolution

  • Carrillo, Alfonso J.
  • López-García, Andrés
  • Delgado-Galicia, Blanca
  • Serra Alfaro, José Manuel
Many relevant high-temperature chemical processes require the use of oxide-supported metallic nanocatalysts. The harsh conditions under which these processes operate can trigger catalyst degradation via nanoparticle sintering, carbon depositions or poisoning, among others. This primarily affects metallic nanoparticles created via deposition methods with low metal-support interaction. In this respect, nanoparticle exsolution has emerged as a promising method for fabricating oxide-supported nanocatalysts with high interaction between the metal and the oxide support. This is due to the mechanism involved in nanoparticle exsolution, which is based on the migration of metal cations in the oxide support to its surface, where they nucleate and grow as metallic nanoparticles partially embedded in the oxide. This anchorage confers high robustness against sintering or coking-related problems. For these reasons, exsolution has attracted great interest in the last few years. Multiple works have been devoted to proving the high catalytic stability of exsolved metallic nanoparticles in several applications for high-temperature energy storage and conversion. Additionally, considerable attention has been directed towards understanding the underlying mechanism of metallic nanoparticle exsolution. However, this growing field has not been limited to these types of studies and recent discoveries at the forefront of materials design have opened new research avenues. In this work, we define six new trends in nanoparticle exsolution, taking a tour through the most important advances that have been recently reported., The project that gave rise to these results received the support of a fellowship from the “la Caixa” Foundation (ID 100010434). The fellowship code is LCF/BQ/PI20/11760015. Financial support by the Spanish Ministry of Science and Innovation (PID2022-139663OB-100 and CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) and by Generalitat Valenciana (CIPROM/2022/10) is gratefully acknowledged. Blanca Delgado-Galicia acknowledges the funding provided by the SECAT Grants Program for the Completion of Master's Thesis in Catalysis.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Squeezing Out Nanoparticles from Perovskites: Controlling Exsolution with Pressure

  • López-García, Andrés
  • Remiro-Buenamañana, Sonia
  • Neagu, Dragos
  • Carrillo, Alfonso J.
  • Serra Alfaro, José Manuel
Nanoparticle exsolution has emerged as a versatile method to functionalize oxides with robust metallic nanoparticles for catalytic and energy applications. By modifying certain external parameters during thermal reduction (temperature, time, reducing gas), some morphological and/or compositional properties of the exsolved nanoparticles can be tuned. Here, it is shown how the application of high pressure (<100 bar H) enables the control of the exsolution of ternary FeCoNi alloyed nanoparticles from a double perovskite. H pressure affects the lattice expansion and the nanoparticle characteristics (size, population, and composition). The composition of the alloyed nanoparticles could be controlled, showing a reversal of the expected thermodynamic trend at 10 and 50 bar, where Fe becomes the main component instead of Ni. In addition, pressure drastically lowers the exsolution temperature to 300 °C, resulting in unprecedented highly-dispersed and small-sized nanoparticles with a similar composition to those obtained at 600 °C and 10 bar. The mechanisms behind the effects of pressure on exsolution are discussed, involving kinetic, surface thermodynamics, and lattice-strain factors. A volcano-like trend of the exsolution extent suggests that competing pressure-dependent mechanisms govern the process. Pressure emerges as a new design tool for metallic nanoparticle exsolution enabling novel nanocatalysts and surface-functionalized materials., The project that gave rise to these results received the support of a fellowship from the “la Caixa” Foundation (ID 100010434). The fellowship code is LCF/BQ/PI20/11760015. Financial support by the Spanish Ministry of Science and Innovation (PID2022-139663OB-I00 and CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) and by Generalitat Valenciana (CIPROM/2022/10) is gratefully acknowledged. The authors thank the support of the Electronic Microscopy Service of the Universitat Politècnica de València. [Correction added on 30 August 2024 after first online publication: Figures 1–6 has been updated.]
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Understanding the evolution of ternary alloyed nanoparticles during reversible exsolution from double perovskite oxides

  • López-García, Andrés
  • Carrillo, Alfonso J.
  • Jimenez, Catalina E.
  • Suárez Anzorena, Rosario
  • Garcia-Diez, Raúl
  • Pérez-Dieste, Virginia
  • Villar-García, Ignacio J.
  • Hungría, Ana B.
  • Bär, Marcus
  • Serra Alfaro, José Manuel
Multicomponent nanoparticle exsolution has emerged as a promising process for obtaining highly active catalysts supported on perovskite oxides. For instance, FeCoNi alloys can be exsolved from SrFeCoNiMnMoO, boosting the electrocatalytic properties of these electrodes. However, due to differences in cation diffusion properties, the composition of the nanoparticles is uneven and strongly affected by process conditions such as temperature. An additional key feature of exsolution is its reversibility, which could help in catalyst regeneration if poisoned. Nevertheless, there is little knowledge on the reversibility mechanisms of multicomponent exsolved alloys. For that purpose, a combination of synchrotron-based in situ X-ray Diffraction (XRD) and Near-Ambient Pressure X-ray Photoelectron Spectroscopy (NAP-XPS) was employed in this work to uncover these missing aspects of multicomponent alloyed exsolution. These techniques allowed determination of the crystallographic and surface-related phenomena occurring during reversible exsolution both to the nanoparticles and the perovskite oxide support. This enabled the identification of the exsolution onset temperature and the range at which the double perovskite to Ruddlesden-Popper transition occurred, a process that has notable implications for the electrocatalytic performance. Finally, in combination with microscopy analyses, it was possible to reveal the morphological and compositional changes that the exsolved nanoparticles experienced upon reduction-oxidation cycles. This resulted in a re-arrangement of the surface species and a variation in the composition (Fe enrichment) of the regenerated ternary alloyed exsolved nanoparticles. These results indicate that reversible exsolution might alter the catalytic properties of the exsolved nanoparticles, with profound implications in the performance of (electro)catalytic processes., The project that gave rise to these results received the support of a fellowship from “la Caixa” Foundation (ID 100010434). The fellowship code is LCF/BQ/PI20/11760015. Financial support by Generalitat Valenciana (CIPROM/2022/10) and by the Spanish Ministry of Science and Innovation (PID2022-139663OB-100 and CEX2021-001230-S) grants funded by MCIN/AEI/10.13039/501100011033. We thank the financial support of the Helmholtz Initiative and Networking Fund through the HZB-BASF project ENERCHEM: Energiespeicherung durch Chemie. These experiments were performed at BL24-CIRCE (proposal number 2022035801) and BL04-MSPD (2022025687) beamlines at ALBA Synchrotron with the collaboration of ALBA staff. The authors thank Alexander Missyul for the help with setting up the in situ XRD experiments and Elena Vicente for the support on the NAP-XPS experimental campaign. Authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node “División de Microscopía Electrónica” at Universidad de Cádiz and project PID2022-142312NB-I00. We thank the support of the Electronic Microscopy Service of the Universitat Politècnica de València.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhancement of catalytic activity in CO2 methanation in Ni-based catalysts supported on delaminated ITQ-6 zeolite

  • Machado-Silva, R.B.
  • Da Costa-Serra, J. F.
  • Chica Lara, Antonio
Ni-based catalysts supported on delaminated ITQ-6 zeolite with different Si/Al ratios, 30 and ∞, were tested in the methanation of CO and CO. ITQ-6 supports exhibited high surface areas (> 590 m/g), and the catalysts based on them presented elevated CO and CO conversion values, turnover frequencies (TOF), and CH selectivity (> 90 %). Comparing the ITQ-6 catalyst and its precursor ferrierite (FER)-based catalyst, H-chemisorption results confirmed higher metallic dispersion for the former, which resulted in improved H uptake and efficient interaction of reaction intermediates via the associative pathway. Combined kinetic studies indicated that their higher available metallic surface contributed to lower apparent activation energies towards CH formation, accounting for the higher selectivity values. A 15 wt% Ni-based catalyst supported on ITQ-6 zeolite (Si/Al = 30) exhibited catalytic results (X = 79 % y S = 98 %) comparable or even superior to some of the best zeolite-based catalysts reported so far., Financial support from the Spanish Ministry of Science and Innovation (PID2022-139663OB-100, ED2021-130372B-C44 and CEX2021-001230-S grants funded by MCIN/AEI/10.13039/501100011033) and by Generalitat Valenciana (CIPROM/2022/10 grant) are acknowledged. Raul Bruno Machado da Silva also thanks the “la Caixa” Foundation InPhINIT Program (ID 100010434), fellowship code LCF/BQ/DI19/11730019, for the funding. We also thank ITQ researcher Urbano Díaz and collaborators for providing the zeolite support samples and the Microscopy Service from the Polytechnic University of Valencia for the help with the microscopy measurements.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Application of catalytic ozonation using Y zeolite in the elimination of pharmaceuticals in effluents from municipal wastewater treatment plants

  • Prada-Vásquez, María A.
  • Simarro-Gimeno, Claudia
  • Vidal-Barreiro, Isabel
  • Cardona-Gallo, Santiago A.
  • Pitarch, Elena
  • Hernández, Félix
  • Torres-Palma, Ricardo A.
  • Chica Lara, Antonio
  • Navarro-Laboulais, J.
Catalytic ozonation using faujasite-type Y zeolite with two different SiO/AlO molar ratios (60 and 12) was evaluated for the first time in the removal of 25 pharmaceutical compounds (PhCs) present in real effluents from two municipal wastewater treatment plants both located in the Mediterranean coast of Spain. Additionally, control experiments including adsorption and direct ozonation, were conducted to better understand the fundamental aspects of the different individual systems in wastewater samples. Commercial zeolites were used in sodium form (NaY). The results showed that the simultaneous use of ozone and NaY zeolites significantly improved the micropollutants degradation rate, able to degrade 95 % of the total mixture of PhCs within the early 9 min using the zeolite NaY-12 (24.4 mg O L consumed), while 12 min of reaction with the zeolite NaY-60 (31 mg O L consumed). In the case of individual experiments, ozonation removed 95 % of the total mixture of PhCs after 25 min (46.2 mg O L consumed), while the direct adsorption, after 60 min of contact time, eliminated 30 % and 44 % using the NaY-12 and NaY-60 zeolites, respectively. Results showed that the Brønsted acid sites seemed to play an important role in the effectiveness of the treatment with ozone. Finally, the environmental assessment showed that the total risk quotients of pharmaceuticals were reduced between 87 %–99 % after ozonation in the presence of NaY-60 and NaY-12 zeolites. The results of this study demonstrate that catalytic ozonation using NaY zeolites as catalysts is a promising alternative for micropollutant elimination in real-world wastewater matrices., The authors thank Instituto de Tecnología Química (ITQ), Consejo Superior de Investigaciones Científicas (CSIC), and Universitat Politècnica de València (UPV) for the facilities and financial support and University of Jaume I for the use of LC-MS/MS instrumentation. Financial support by the Spanish Ministry of Science and Innovation (PID2021-127451OB-I00, PID2022-139663OB-100 and CEX2021-001230-S grants funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe) and by Generalitat Valenciana (CIPROM/2022/10 grant) is acknowledged.The financial support of University Jaume I (project UJI-B2022-16) is also acknowledged. M. A. Prada-Vasquez thanks MINCIENCIAS COLOMBIA for his PhD fellowship (Convocation 785-2017).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Controlling grain boundary segregation to tune the conductivity of ceramic proton conductors

  • Kindelmann, Moritz
  • Povstugar, Ivan
  • Kuffer, Severin
  • Jennings, Dylan
  • Ebert, Julian N.
  • Weber, Moritz L.
  • Zahler, M. Pascal
  • Escolástico Rozalén, Sonia
  • Almar, Laura
  • Serra Alfaro, José Manuel
  • Kaghazchi, Payam
  • Bram, Martin
  • Rheinheimer, Wolfgang
  • Mayer, Joachim
  • Guillon, Olivier
Acceptor-doped barium zirconates are of major interest as proton-conducting ceramics for electrochemical applications at intermediate operating tempera- tures. However, the proton transport through polycrystalline microstructures is hindered by the presence of a positive space charge potential at grain boun- daries. During high-temperature sintering, the positive charge acts as a driving force for acceptor dopant segregation to the grain boundary. Acceptor segregation to grain boundaries has been observed in sintered ceramics, but the fundamental relationship between the segregation kinetics and the protonic conductivity is poorly understood. Here, a comprehensive study of the in¿uence of acceptor dopant segregation on the electrochemical properties of grain boundaries in barium zirconate ceramics is presented. An out-of-equilibrium model material that displays no detectable Y segregation at its grain boundaries is explicitly designed. This model material serves as a starting point to measure the kinetics of segregation and the induced changes in grain boundary conductivity upon varying thermal histories. Furthermore, the electrochemical results from impedance spectroscopy to atomic resolution transmission electron microscopy, atom probe tomography, and DFT simulations are correlated. It is discovered that acceptor dopant segregation drastically increases the proton conductivity in both the model system and several other application-relevant compositions, Dr. Egbert Wessel (IMD-1, Forschungszentrum Jülich GmbH) is acknowledged for EBSD measurements. M.K is acknowledging the financial support from the DFG in the project MA 1280/69-1 and GU 993/14-1. J.E., D.J., M.P.Z. and W.R. thank the DFG for funding within the Emmy Noether program (RH 146/1-1). J.M.S., S.E. and L.A. are acknowledging financial support by the Spanish Ministry of Science and Innovation (PID2022-139663OB-100 and CEX2021-001230-S grants funded by MCIN/AEI/10.13039/501100011033). P.K. and S.K. are acknowledging computing time granted through JARA-HPC on the supercomputer JURECA at Forschungszentrum Jülich under grant No. jiek12 and funding from the European Union under grant agreement No. 101099717 – ECOLEFINS project.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impact of phase-separated Janus-type formation on the reversibility of multicomponent exsolved nanoparticles from complex perovskites

  • Delgado-Galicia, Blanca
  • López-García, Andrés
  • Jiménez, Catalina Elena
  • Suarez-Anzorena, Rosario
  • Bär, Marcus
  • Pérez-Dieste, Virginia
  • Aguadero, Ainara
  • Alonso, J. A.
  • Puente-Orench, Inés
  • Almar, Laura
  • Carrillo, Alfonso J.
  • Serra Alfaro, José Manuel
Solid oxide electrochemical cells (SOCs) benefit from exsolution-based electrocatalyst design, where nanoparticles anchored in perovskites enhance stability and activity. Two of the most transformative features of this technology are the ability to engineer multielemental alloy nanoparticles for tailored catalysis and the potential for in situ catalyst regeneration through redox-driven redissolution. However, the fundamental mechanisms governing these processes in complex, multicomponent systems remain poorly understood. In this work, the simultaneous exsolution of Fe, Ni, Co, and Cu from the fuel electrode material Sr2Fe1.2Co0.1Ni0.1Cu0.1Mo0.5O6-δ was investigated using in situ powder neutron diffraction and synchrotron-based near-ambient-pressure X-ray photoelectron spectroscopy (NAP-XPS), combined with advanced electron microscopy to capture morphological evolution. At 700 °C, Cu-rich nanoparticles dominate, consistent with Ellingham reducibility trends; however, higher temperatures favor the formation of Fe-enriched alloys, driven by the high availability of Fe cations. Conversely, prolonged reduction promotes the formation of phase-separated Janus-type nanoparticles, primarily due to Fe–Cu immiscibility. Interestingly, redox cycling tests revealed that nanoparticle composition dictates redissolution capacity. While homogeneous alloys exhibited total redissolution into the perovskite backbone and subsequent re-exsolution, Janus-type nanoparticles underwent irreversible transformation into pyramidal NiO nanoparticles via intermediate cubic mixed oxide structures during air exposure. These findings elucidate how temperature, time, and elemental composition govern exsolved nanoparticle chemistry, morphology, and regeneration, establishing design principles for inducing multimetal exsolution in complex oxides toward enhanced electrocatalytic performance in energy conversion technologies., Financial support by Generalitat Valenciana (CIPROM/2022/10) and by the Spanish Ministry of Science and Innovation (PID2022-139663OB-100 and CEX2021-001230-S) is gratefully acknowledged. These grants were funded by MCIN/AEI/10.13039/501100011033. We thank the financial support of the Helmholtz Initiative and Networking Fund through the German Federal Ministry of Education and Research (Bundesministerium für Bildung und Forschung, BMBF) under Grant No. 03EW0015B (CatLab). These experiments were performed at BL24-CIRCE (proposal number 2024088545) beamlines at ALBA Synchrotron with the collaboration of ALBA staff. The authors wish to express their gratitude to the Institut Laue-Langevin (ILL) and the staff at D1B for making all facilities available for neutron diffraction experiments (Experiment No.CRG-2991). We thank the support of the Electronic Microscopy Service of the Universitat Politècnica de València., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001230-S)., Peer reviewed