Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhanced CO2 separation via molten-carbonate membranes with freeze-cast, porous ceramic supports

  • Tsochataridou, S.
  • Papaioannou, E.I.
  • Mutch, G. A.
  • Gaudillere, C.
  • Metcalfe, I. S.
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Molten-carbonate membranes with freeze-cast, porous ceramic supports were fabricated and tested for high temperature CO2 separation. The freeze-casting fabrication method resulted in highly porous and hierarchically organized ceramic supports. The versatility of the freeze-casting method was demonstrated by fabricating ionic (oxide-ion) and mixed ionic-electronic conducting membrane supports, namely, La0.58Sr0.4Fe0.8Co0.2O3-delta (LSFC), Ce0.8Gd0.2O1.9 (CGO) and Y0.2Zr0.8O1.9 (YSZ). The resulting membranes showed very high CO2 permeance, achieving maximum values of similar to 1.5 x 10(-7)mol Pa-2 s(-2) m(-2) at 850 degrees C. The gas permeation results demonstrated that the pore microstructure resulting from freeze-casting provides higher CO2 permeances than membranes fabricated from the same materials, but using other fabrication methods, in the literature., Additional metadata are available at: 10.25405/data.ncl.12443531. For the purpose of open access, the author has applied a Creative Commons Attribution (CC BY) licence to any Author Accepted Manu-script version arising from this submission. The research leading to these results has received funding from the European Research Council under the European Union's Seventh Framework Program (FP/2007-2013) /ERC Grant Agreement Number 320725. This work was supported by the Engineering & Physical Sciences Research Council [grant numbers EP/P009050/1, EP/P007767/1, EP/M01486X/1, EP/V047078/1, EP/W03395X/1, EP/Y034961/1] , the Spanish Government (PID2022-139663OB-100 and CEX2021-001230-S grants funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (CIPROM/2022/10 grant) . ST thanks EPSRC for the funding of a PhD studentship. GAM was supported by the Royal Academy of Engineering under the Research Fellowship scheme.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Measuring membrane permeation rates through the optical visualization of a single pore

  • Tsochataridou, Sotiria
  • Mutch, Greg A.
  • Neagu, Dragos
  • Papaioannou, Evangelos I.
  • Sanjuán, M. L.
  • Ray, Brian
  • Merino, R. I.
  • Orera, V. M.
  • Metcalfe, S.
Membranes are a critical technology for energy-efficient separation processes. The routine method of evaluating membrane performance is a permeation measurement. However, such measurements can be limited in terms of their utility: membrane microstructure is often poorly characterized; membranes or sealants leak; and conditions in the gas phase are poorly controlled and frequently far-removed from the conditions employed in the majority of real processes. Here, we demonstrate a new integrated approach to determine permeation rates, using two novel supported molten-salt membrane geometries. In both cases, the membranes comprise a solid support with laser-drilled pores, which are infiltrated with a highly CO2-selective molten carbonate salt. First, we fabricate an optically transparent single-crystal, single-pore model membrane by local laser drilling. By infiltrating the single pore with molten carbonate, monitoring the gas–liquid interface optically, and using image analysis on gas bubbles within the molten carbonate (because they change volume upon controlled changes in gas composition), we extract CO2 permeation rates with exceptional speed and precision. Additionally, in this arrangement, microstructural characterization is more straightforward and a sealant is not required, eliminating a major source of leakage. Furthermore, we demonstrate that the technique can be used to probe a previously unexplored driving force region, too low to access with conventional methods. Subsequently, we fabricate a leak-free tubular-supported molten-salt membrane with 1000 laser-drilled pores (infiltrated with molten carbonate) and employ a CO2-containing sweep gas to obtain permeation rates in a system that can be described with unprecedented precision. Together, the two approaches provide new ways to measure permeation rates with increased speed and at previously inaccesible conditions., The research leading to these results has received funding from the European Research Council (ERC) under the European Union’s Seventh Framework Programme (FP/2007-2013)/ERC Grant Agreement 320725 and the Engineering and Physical Sciences Research Council (EPSRC) via Grants EP/M01486X/1, EP/P007767/1, and EP/P009050/1. Greg A. Mutch thanks the EPSRC for his Doctoral Prize Fellowship (EP/M50791X/1) and Newcastle University for a Newcastle University Academic Track (NUAcT) Fellowship. Financial support from the Spanish Ministerio de Economía y Competitividad and FEDER Funds under Project MAT2016-77769-R is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High CO2 permeability in supported molten-salt membranes with highly dense and aligned pores produced by directional solidification

  • Grima, Lorena
  • Mutch, Greg A.
  • Oliete, Patricia B.
  • Bucheli, Wilmer
  • Merino, R. I.
  • Papaioannou, Evangelos I.
  • Bailey, Josh J.
  • Kok, M. D.
  • Brett, D. J. L.
  • Shearing, P. R.
  • Metcalfe, Ian S.
  • Sanjuán, M. L.
Composite molten salt-ceramic membranes are promising devices for high-temperature CO2 separation. Intensive material properties impact on separation performance as do membrane geometry (thickness) and microstructure (pore volume fraction, size, connectivity, and tortuosity factor). Although controlling pore size is considered somewhat routine, achieving pore alignment and connectivity is still challenging. Here we report the production of the first gas separation membrane using a porous ceramic matrix obtained from a directionally-solidified magnesium-stabilised zirconia (MgSZ) – MgO fibrilar eutectic as the membrane support. MgO was removed from the parent material by acid-etching to create a porous matrix with highly aligned pores with diameters of ~1 μm. X-ray nano-computed tomography of a central portion (~32,000 μm3) of the support identified ~21% porosity, with all pores aligned within 10° and ~76% percolating along the longest sampled length. Employing the matrix as a support for a carbonate molten salt, a high CO2 permeability of 1.41x10-10 mol.m-1.s-1.Pa-1 at 815 °C was achieved, among the highest reported for supported molten-carbonate membranes (typically 10-12 to 10-10 mol.m-1.s-1.Pa-1 at similar temperatures). We suggest that the high permeability is attributable to the excellent pore characteristics resulting from directional solidification, namely a dense array of parallel, micron-scale pores connecting the feed and permeate sides of the membrane., The authors acknowledge the financial support from the Spanish Ministerio de Economía y Competitividad and Feder Funds under project MAT2016-77769R. L. Grima acknowledges financial support through grant BES-2017-079683 associated to the aforementioned project. The research leading to these results has received funding from the European Research Council under the European Union's Seventh Framework Programme (FP/2007-2013)/ERC Grant Agreement Number 320725 and from the Engineering & Physical Sciences Research Council (EPSRC) via grants EP/M01486X/1, EP/P007767/1 and EP/P009050/1. PRS acknowledges the Royal Academy of Engineering (CiET1718/59). PRS, DJLB, JJB and MDK acknowledge the support of The Faraday Institution (faraday.ac.uk; EP/ S003053/1). G. Mutch was supported by the Royal Academy of Engineering under the Research Fellowship Scheme and would like to thank the EPSRC for his Doctoral Prize Fellowship (EP/M50791X/1) and Newcastle University for a Newcastle University Academic Track (NUAcT) Fellowship. X-Ray CT acquisition and analysis was supported by UCL and EPSRC under EP/N032888/1. We thank the Servicio General de Apoyo a la Investigación-SAI (Universidad de Zaragoza) for technical support in X-ray diffraction and electron microscopy experiments, Rubén Gotor for technical assistance in sample preparation and R. Lahoz for laser-drilling the YSZ plate that serves as the membrane base., Peer reviewed