Pasar al contenido principal

CATALIZADORES MULTI-FUNCIONALES CON APLICACION EN PROCESOS DE INTERES MEDIOAMBIENTAL E INDUSTRIAL

PID2021-122755OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 31
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Highly Stable Subnanometric Pt Clusters in All Silica K-Doped Zeolites: Implications for the CO Oxidation Reaction

  • Bohigues-Vallet, Benjamín
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Serna Merino, Pedro Manuel
  • Millet Roig, Isabel
[EN] Small metal clusters can provide improved catalytic activity compared with single metal atoms and larger metal nanoparticles of the same element. The stabilization of metal ensembles of a few atoms is extremely challenging, however, because reductive sintering and oxidative fragmentation are phenomena that often occur at low temperatures in reactive atmospheres. In this regard, the CO oxidation reaction is particularly challenging because CO tends to aggregate noble metals on nonreducible supports, such as SiO2, whereas O2 triggers the formation of (less active) single atoms on reducible supports, such as CeO2. Accordingly, state-of-the-art Pt/CeO2 catalysts undergo severe deactivation under practical CO oxidation conditions in excess of O2. In this contribution, we report a highly active CO oxidation catalyst that is able to overcome both sintering and fragmentation instabilities under conditions that make other alternatives fail. The catalyst is based on small Pt clusters inside K-MFI that benefit from both strong metal/support interactions at defective sites of the zeolite and strong electronic promotion by the support, to attain highly stable, highly active, electron-rich Pt clusters., This work has been supported by the Spanish Government through PID2021-122755OB-I00 funded by MCIN/AEI/10.13039/501100011033 and TED2021-130739B-I00 funded by MCIN/AEI/10.13039/501100011033/EU/PRTR and by the Generalitat Valenciana by the Prometeo Program (CIPROM/2023/34). The authors are also thankful for the Severo Ochoa financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S/funding by MCIN/AEI/10.13039/501100011033). B.B. acknowledges the Spanish Government for a Severo Ochoa FPI scholarship (PRE2022-102555). The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Zeolite/LDH Composites as Additives for Light Olefin Production by Catalytic Cracking of Heavy Oil Fractions

  • Rodaum, Chadatip
  • Wattanakit, Chularat
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Martínez, Cristina|||0000-0002-4415-084X
[EN] Among the possible strategies for the enhancement of light olefin production in the catalytic cracking of heavy oils, the use of functional additives has proven to be an effective approach. Herein, we present a composite material (Z5-LDH) derived from medium-pore zeolite ZSM-5 (Z5) and layered double hydroxide (LDH)-based mixed oxides as a potential additive for catalytic cracking of heavy oils. This material shows enhanced selectivity to light olefins within the gaseous C3¿C4 fraction. The Z5-LDH composite features a core¿shell structure, with the zeolite forming the core, which is surrounded by an LDH shell. It exhibits reduced Brønsted acidity compared to pure ZSM-5 and surface basicity provided by the basic oxides formed upon calcination of the LDH. The catalytic performance of the composite has been compared with that of pure ZSM-5 for catalytic cracking of vacuum gasoil (VGO). When used as an additive, the composite yields a significantly higher olefin content and selectivity within the C3¿C4 gas fraction than a commercial USY base catalyst alone (17.2% compared with 11.3 wt %, respectively). Furthermore, the propylene/propane and butenes/butanes ratios obtained with the Z5- LDH additive are substantially higher than those obtained with the pure ZSM-5 additive. The enhanced selectivity to C3¿C4 olefins is related, on the one hand, to the lower density and acid strength of the Brønsted acid sites in Z5-LDH relative to ZSM-5, which minimizes secondary reactions such as hydrogen transfer. On the other hand, the basic mixed-metal oxide shell, derived from the LDH, inhibits the readsorption of the C3¿C4 olefins produced, limiting their further conversion and promoting light olefin selectivity. The advantages of the Z5-LDH composite as a fluid catalytic cracking (FCC) additive have been demonstrated not only for conversion of conventional VGO but also in the cracking of heavier feeds, such as atmospheric residue., This work was financially supported by the Vidyasirimedhi Institute of Science and Technology (VISTEC), the National Research Council of Thailand (NRCT) through the Royal Golden Jubilee (RGJ): NRCT5-RGJ63024, the Program Management Unit for Human Resources & Institutional Development, Research and Innovation (grant number: B41G680026), by the Spanish Government through PID2021-122755OB-I00 (funded by MCIN/AEI/10.13039/501100011033) and TED2021-130739B-I00 (funded by MCIN/AEI/10.13039/501100011033/EU/PRTR), and by the Generalitat Valenciana through the Prometeo Program (CIPROM/2023/34). Severo Ochoa financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S/funding by MCIN/AEI/10.13039/501100011033) is also gratefully acknowledged. The authors thank Eva M. Briz for technical assistance and the Electron Microscopy Service of the UPV for their help in sample characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of Framework Composition and NH3 on the Diffusion of Cu+ in Cu-CHA Catalysts Predicted by Machine-Learning Accelerated Molecular Dynamics

  • Millán-Cabrera, Reisel|||0000-0002-4489-5411
  • Bello-Jurado, Estefanía
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Gomez-Bombarelli, Rafael
[EN] Cu-exchanged zeolites rely on mobile solvated Cu+ cations for their catalytic activity, but the role of the framework composition in transport is not fully understood. Ab initio molecular dynamics simulations can provide quantitative atomistic insight but are too computationally expensive to explore large length and time scales or diverse compositions. We report a machine-learning interatomic potential that accurately reproduces ab initio results and effectively generalizes to allow multinanosecond simulations of large supercells and diverse chemical compositions. Biased and unbiased simulations of [Cu(NH3)2]+ mobility show that aluminum pairing in eight-membered rings accelerates local hopping and demonstrate that increased NH3 concentration enhances long-range diffusion. The probability of finding two [Cu(NH3)2]+ complexes in the same cage, which is key for SCR-NOx reaction, increases with Cu content and Al content but does not correlate with the long-range mobility of Cu+. Supporting experimental evidence was obtained from reactivity tests of Cu-CHA catalysts with a controlled chemical composition., R.M. acknowledges the Margarita Salas grant from the Ministerio de Universidades, Spain, funded by the European Union-Next Generation EU. The authors are grateful for computation time allocated on the MIT SuperCloud cluster, the MIT Engaging cluster at the Massachusetts Green High Performance Computing Center (MGHPCC), and Summit at the Oakridge Leadership Computing Facility through the 2021 ALCC DOE program. R.G-B. thanks the Jeffrey Cheah Career Development Chair. R.M thanks Gavin Winter for assistance during the training of NNP and processing of the MD simulations and Simon Axelrod for implementing PaiNN. M.B. and M.M. are grateful for financial support from the Spanish government through PID2020-112590GB-C21, PID2021-122755OB-I00, and TED2021-130739B-I00 (MCIN/AEI/FEDER, UE) and from CSIC through the I-link+ Program (LINKA20381). E.B.-J. acknowledges the Spanish government-MCIU for a FPI scholarship (PRE2019-088360).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design of bi-functional Ni-zeolites for ethylene oligomerization: Controlling Ni speciation and zeolite properties by one-pot and post-synthetic Ni incorporation

  • Martínez-Gómez-Aldaraví, Adrián|||0009-0007-1928-8277
  • Paris, Cecilia|||0000-0002-5673-8114
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Martínez, Cristina|||0000-0002-4415-084X
[EN] The design of diverse Ni-zeolites has been performed attempting to control different physico-chemical properties of the zeolite supports as well as the Ni speciation to study their influence on the industrially relevant ethylene oligomerization reaction. In this sense, Ni-containing medium-pore MFI and large-pore BEA zeolites have been synthesized with different particle sizes, Si/Al molar ratios and following different Ni-incorporation strategies (one-pot versus post-synthesis). Characterization techniques reveal the preferential presence of cationic Ni2+ and NiO nanoclusters inside the zeolitic pores when Ni has been incorporated by post-synthesis impregnation or one-pot approaches, respectively. The presence of Ni2+ species, rather than other factors, mainly governs olefin oligomerization under near-ambient pressures, guiding preferentially towards C-4-C-6 olefins as main products. Crystal size, acidity and/or Ni incorporation methodology, on the other hand, play key roles under high-pressure reaction conditions, resulting in the formation of heavier olefins, especially in zeolites containing less cationic nickel, larger proportion of NiO clusters and higher Bronsted acid site density., This work has been supported by Spanish Government through PID2021-122755OB-I00 funded by MCIN/AEI/10.13039/501100011033 and TED2021-130739B-I00 funded by MCIN/AEI/10.13039/501100011033/EU/PRTR), and by Generalitat Valenciana through AICO/2021/201. Financial support by Severo Ochoa centre of excellence program (CEX2021-001230-S) is also gratefully acknowledged. AMGA acknowledges the Spanish Government for a Severo Ochoa FPI scholarship (PRE2019-088361) . J. M. Salas is acknowledged for his contribution to CO-IR experiments. The Electron Microscopy Service of the UPV is also acknowledged for their help in sample characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A comprehensive mapping of zeolite-template chemical space

  • Xie, Mingrou
  • Schwalbe-Koda, Daniel
  • Hoffman, Alexander
  • Santiago-Reyes, Omar
  • Paris, Cecilia
  • Gomez-Bombarelli, Rafael
  • Semanate-Esquivel, Yolanda Marcela|||0009-0009-0289-4267
  • Bello-Jurado, Estefanía
  • Moliner Marin, Manuel|||0000-0002-5440-716X
[EN] Zeolites are industrially important catalysts and adsorbents, typically synthesized using specific molecules known as organic structure-directing agents (OSDAs). The templating effect of the OSDAs is pivotal in determining the zeolite polymorph formed and its physicochemical properties. However, de novo design of selective OSDAs is challenging because of the diversity and size of the zeolite-OSDA chemical space. Here we present ZeoBind, a computational workflow powered by machine learning that enables an exhaustive exploration of the OSDA space. We design predictive tasks that capture zeolite-molecule matching, train predictive models for these tasks on hundreds of thousands of datapoints and curate a library of 2.3 million synthetically accessible, hypothetical OSDA-like molecules enumerated from commercially available precursors. We use ZeoBind to screen nearly 500 million zeolite-molecule pairs and identified and experimentally validated two new OSDAs that template zeolites with novel compositions. The scale of the OSDA library, along with the open-access tools and data, has the potential to accelerate OSDA design for zeolite synthesis., M.M., C.P., E.B.-J. and Y.M.S.-E. acknowledge financial support by the Spanish Government through PID2021-122755OB-I00 (funded by MCIN/AEI/10.13039/501100011033) and TED2021-130739B-I00 (funded by MCIN/AEI/10.13039/501100011033/EU/PRTR), by the Generalitat Valenciana through the Prometeo Program (CIPROM/2023/34) and CSIC through the I-link+ Program (ILINK24035). M.M., C.P., E.B.-J. and Y.M.S.-E. also thank the Severo Ochoa financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S/funding by MCIN/AEI/10.13039/501100011033). M.X. acknowledges funding from the Agency of Science, Technology and Research (A*STAR) scholarship. D.S.-K. acknowledges funding from the MIT Energy Fellowship. E.B.-J. and Y.M.S.-E. acknowledge the Spanish Government for an FPI scholarship (PRE2019-088360) and a Severo Ochoa FPI scholarship (PRE2020-092319), respectively. R.G.-B. and A.H. acknowledge funding from MIT Deshpande Center, Alfred P. Sloan Research Fellowship (FG-2023-20026) and MISTI Inditex Fund. The Electron Microscopy Service of the UPV is also acknowledged for their help in sample characterization. Computations were executed on MIT Engaging and Supercloud clusters.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Resolving Complex K-Pt-Sn Interactions in PtSn@K-MFI Catalysts for Alkane Dehydrogenation

  • Martínez-Gómez-Aldaraví, Adrián|||0009-0007-1928-8277
  • Millán-Cabrera, Reisel|||0000-0002-4489-5411
  • Vidal Moya, José Alejandro
  • Martínez, Cristina|||0000-0002-4415-084X
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Serna Merino, Pedro Manuel
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Millet Roig, Isabel
  • Alos Marti, Aroa
  • Meyer, Randall
[EN] K and Sn contents were rationalized during the synthesis of PtSn@K-MFI to maximize metal dispersion and stability along the MFI crystallites. Experimental results and theoretical calculations reveal a stoichiometry of similar to 1 K per unit cell of MFI, limiting then the final K incorporation within siliceous MFI crystals at similar to 0.7 wt %. Above this stoichiometry, K is not incorporated into the final solids unless significant amounts of Sn are simultaneously present, leading to the formation of tin-silicate precipitates. The optimized PtSn@K-MFI catalysts improve the catalytic performance of well-established references, as PtSn/SiO2, for the propane dehydration (PDH) reaction. In particular, low Sn loadings (below 0.5 wt %) result in higher time-on-stream (TOS) deactivation catalytic profiles but excellent regenarability after consecutive PDH reaction, while higher Sn content (close to 1 wt %) minimizes TOS deactivation due to the maximization of Pt-Sn bonds but consecutive regenerations result in significant metal sintering. Increasing Sn contents within MFI crystallites facilitates Pt sintering and, thus, occurring catalyst deactivation upon regeneration cycles. As a result of complex interconnected nucleation/crystallization processes, fine-tuning rationalizations of one-pot synthesis approaches can substantially influence the final atomic and subnanometric metal interactions and, consequently, the catalytic and sintering-resistance properties when exposed to highly demanding industrial conditions., The authors acknowledge financial support by ExxonMobil, by the Spanish Government through PID2021-122755OB-I00 (funded by MCIN/AEI/10.13039/501100011033) and TED2021-130739B-I00 (funded by MCIN/AEI/10.13039/501100011033/EU/PRTR), and by the Generalitat Valenciana through the Prometeo Program (CIPROM/2023/34). The authors are also thankful for the Severo Ochoa financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S/funding by MCIN/AEI/10.13039/501100011033). AMGA acknowledges the Spanish Government for a Severo Ochoa FPI scholarship (PRE2019-088361). The Electron Microscopy Service of the UPV is also acknowledged for their help in sample characterization. The XAS results were collected under the PUP-309462 carried out at the National Synchrotron Light Source II, a U.S. Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Brookhaven National Laboratory under Contract No. DE-AC02-98CH10886. RJM and PSM thank Eli Stavitski, Denis Leshchev, and Dominik Wierzbicki for their support at the ISS beamline at NSLS-II. RJM and PSM also thank Corey Kaminsky and Alyssa Love of ExxonMobil for their help with the collection of the XAS data.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cooperativity between atoms in supported Single-Atom Catalysts and metal clusters

  • Serna Merino, Pedro Manuel
[EN] Highlights ¿ Cooperativity and electron-transfer between metals and supports are key phenomena to understand the performance of SACs and small metal clusters. ¿ Single-atom catalysts often require the support to actively participate in the reaction to achieve optimal catalytic performance. ¿ Small amounts of metal clusters could be contributing to the catalysis by SACs. ¿ SACs and metal clusters often show unique opportunities in terms of catalytic selectivity. ¿ The high mobility of supported clusters and SACs makes operando work crucial., Author acknowledges financial support by the Spanish Government through PID2021-122755OB-I00 funded by MCIN/AEI/10.13039/501100011033 and TED2021-130739B-I00 funded by MCIN/AEI/10.13039/501100011033/EU/PRTR. Financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is also gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Approaching enzymatic catalysis with zeolites or how to select one reaction mechanism competing with others

  • Ferri-Vicedo, Pau
  • Li, Chengeng
  • Schwalbe-Koda, Daniel
  • Xie, Mingrou
  • Gomez-Bombarelli, Rafael
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Approaching the level of molecular recognition of enzymes with solid catalysts is a challenging goal, achieved in this work for the competing transalkylation and disproportionation of diethylbenzene catalyzed by acid zeolites. The key diaryl intermediates for the two competing reactions only differ in the number of ethyl substituents in the aromatic rings, and therefore finding a selective zeolite able to recognize this subtle difference requires an accurate balance of the stabilization of reaction intermediates and transition states inside the zeolite microporous voids. In this work we present a computational methodology that, by combining a fast high-throughput screeening of all zeolite structures able to stabilize the key intermediates with a more computationally demanding mechanistic study only on the most promising candidates, guides the selection of the zeolite structures to be synthesized. The methodology presented is validated experimentally and allows to go beyond the conventional criteria of zeolite shape-selectivity., This work has been supported by Spanish Government through CEX2021-001230-S, PID2020-112590GB-C21, PID2021-122755OB-I00 and TED2021-130739B-I00 (MCIN/AEI/FEDER, UE), by Generalitat Valenciana through AICO/2021/201, and CSIC through the I-link+ Program (LINKA20381). The authors thank Dr. Maria Jose Diaz-Cabanas and Dr. Pilar Cumplido for providing the ITQ-24 and ITQ-15 samples. The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization. Red Espanola de Supercomputacion (RES) and Servei d'Informatica de la Universitat de Valencia (SIUV) are acknowledged for computational resources and technical support. P.F. and C.Li. thank ITQ for their contract. M. Xie thanks the Agency for Science, Technology and Research for funding. D Schwalbe-Koda acknowledges financial support from MIT Energy Initiative Fellowship. MIT Engaging cluster, and MIT Lincoln Lab Supercloud cluster at MGHPCC are gratefully acknowledged for computational resources and support. The authors thank the MIT-Spain INDITEX Circularity Seed Fund for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Minimizing rare earth content of FCC catalysts: Understanding the fundamentals on combined P-La stabilization

  • Martínez, Cristina|||0000-0002-4415-084X
  • Vidal Moya, José Alejandro
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Yilmaz, Bilge
  • Kelkar, C.P.
[EN] Fluidized Catalytic cracking (FCC) is one of the main conversion processes in conventional refineries and employs a multicomponent catalyst with Y zeolite as the main source of activity and selectivity towards value added products. In order to meet the severe requirements of the FCC unit, the hydrothermal stability of this large pore zeolite is traditionally improved by means of controlled hydrothermal treatments that can be combined with acid washing cycles, with rare earth (RE) ion exchange or with a combination of both. Phosphorus has also been described as a hydrothermal stabilization element. Although most of the studies are based on ZSM-5 zeolites, a new Y zeolite containing FCC catalyst, Phinesse(TM), was developed recently. This catalyst, based on the partial substitution of RE by P allowed obtaining the same activity and the same yields to the main products as its conventional RE stabilized counterpart in the catalytic cracking of a vacuum gas oil (VGO). In this work, we present a systematic study where the hydrothermal stability of P- and La-free USYs with different dealumination degrees is compared with that of the corresponding USYs containing P or La alone or a combination of both stabilizing elements. The samples have been thoroughly characterized and their catalytic performance has been tested in a MAT unit. According to the results obtained, when using RE alone, only high contents (> 3.5 wt% RE) are able to stabilize the catalysts towards steaming under severe conditions (100% steam, 750 oC). However, lower RE ( wt%) can lead to similar hydrothermal stabilization when combined with intermediate phosphorus contents (similar to 1.0 wt%). The results obtained provide the bases for understanding the reasons behind the benefits of this combined P-La stabilization observed for the commercial PhinesseTM catalyst as compared to a high REO catalyst., This work has been supported by BASF Corporation, by the Spanish Government through PID2021-122755OB-I00 and by the GVA through AICO/2021/201. Financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged. The authors thank Eva Briz for technical assistance and the Electron Microscopy Service of the UPV for their help in sample characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhanced Mass Transport of One-Dimensional Zeolite MTT by Secondary Growth

  • Shilpa, Kumari
  • Choudhury, Sambita
  • Dai, Heng
  • Strohm, James J.
  • Yang, Taimin
  • Rimer, Jeffrey D.
  • Moliner Marin, Manuel|||0000-0002-5440-716X
[EN] One-dimensional zeolites have distinct pore topologies for shape-selective catalysis, yet their performance in conventional reactions is frequently compromised by severe diffusion limitations. Creating opportunities to employ one-dimensional (1D) zeolites in catalytic applications requires advanced synthesis methods to design materials with ultrasmall diffusion path lengths. In this study, we show that the postsynthesis modification of ZSM-23 (MTT) using a protocol analogous to the generation of finned zeolites dramatically improves its mass transport properties. This is accomplished by a facile secondary growth process that introduces surface roughness on the exterior surfaces of MTT crystals and creates greater access to interior pores through the putative removal of intrinsic defects. High-resolution electron microscopy images show that roughened interfaces are step bunches of unfinished layers with ultrasmall dimensions that present a series of short 1D channels. Comparison of these materials against conventional and nanosized ZSM-23 catalysts using methanol to hydrocarbons as a benchmark reaction reveals dramatic enhancement in cumulative turnovers and a propene/ethene ratio that is much higher than conventional ZSM-5 (MFI) zeolites. The improved mass transport of MTT catalysts after secondary growth also markedly extends their lifetime at much shorter reactant contact times without any observed changes in the mechanism of coking. Collectively, these findings highlight an efficient route to generate high-performance 1D zeolites as potential catalysts for commercial applications., The authors acknowledge financial support primarily from the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences under Award Number DE-SC0014468. Support for material characterization was provided by the National Science Foundation (Award DMR-2005201). JDR received additional support from the Welch Foundation (Awards E-1794 and V-E-0001). TY acknowledges support from the Swedish Research Council Formas (2022-02778), Marie Sklodowska-Curie grant (101146059), and the Royal Swedish Academy (CH2022-0015, PH2022-0021, ES2023-0016). MM received support from the Spanish Government through PID2021-122755OB-I00 (funded by MCIN/AEI/10.13039/501100011033) and by the Generalitat Valenciana through the Prometeo Program (CIPROM/2023/34).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synergic Effect of Isolated Ce3+ and Ptd+ Species in UiO-66(Ce) for Heterogeneous Catalysis

  • Rojas-Buzo, Sergio
  • Salusso, Davide
  • Bordiga, Silvia
  • Bohigues-Vallet, Benjamín
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Moliner Marin, Manuel|||0000-0002-5440-716X
[EN] In this work, wehave synthesized through an efficient electrostaticdeposition a Pt single-atom catalyst (SAC) supported on a Ce-MOF.The basic solution employed in the impregnation process favors thedeprotonation of the hydroxyl groups allocated on the clusters thatcan easily interact with the cationic Pt species. The resulting material,denoted as Pt/UiO-66(Ce), shows an increment of Ce3+ content,as demonstrated by UV-vis and Ce L-3-edge XANES spectroscopy.These Ce3+ species and their corresponding oxygen vacanciesare able to accommodate very disperse Pt single sites. Moreover, PtL3-edge XANES and CO-FTIR spectroscopy confirm the cationicnature of the supported Pt & delta;+ (2+ < & delta; <4+). For comparison purpose, we have synthesized and characterizeda well-known Pt single-site catalyst supported on nanocrystallineceria, denoted as Pt/nCeO(2). Since thesimultaneous presence of Ce3+ and Pt & delta;+ on the MOF clusters were able to activate the oxygen molecules andthe CO molecule, respectively, we tested Pt/UiO-66(Ce) for the COoxidation reaction. Interestingly, this catalyst showed & SIM;six-foldincrement in activity in comparison with the traditional Pt/nCeO(2) material. Finally, the characterizationafter catalysis reveals that the Pt nature is preserved and that theactivity is maintained during 14 h at 100 & DEG;C without any evidenceof deactivation., S.R.-B. acknowledges the Margarita Salas grant financed by the Ministerio de Universidades, Spain, and also funded by the European Union-Next Generation EU. S.R.-B. and S.B. acknowledge support from the Project CH4.0 under the MUR program ?Dipartimenti di Eccellenza 2023-2027? (CUP: D13C22003520001). B.B., A.C., and M.M. acknowledge the financial support of the Spanish Government through PID2021-122755OB-I00 funded by MCIN/AEI/10.13039/501100011033 and TED2021-130739B-I00 funded by MCIN/AEI/10.13039/501100011033/EU/PRTR), and of the Generalitat Valenciana through AICO/2021/201. B.B., A.C., and M.M. are also thankful for the Severo Ochoa financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S/funding by MCIN/AEI/10.13039/501100011033).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhancing nucleation to synthesize Al-rich CHA zeolites under ultra-low OSDA contents: Application for heavy-duty NH3-SCR of NOx

  • Bello-Jurado, Estefanía
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Millet Roig, Isabel
  • van Tendeloo, Leen
  • Schütze, Frank W.
  • Vennestrøm, Peter N.R.
[EN] The crystallization of Al-rich CHA zeolites with an ultra-low organic structure directing agent (OSDA) content and without using pre-crystallized FAU zeolites as Si and/or Al sources has been accomplished by controlling the nucleation step. Indeed, the use of ¿gel-type¿ seeds containing discrete nanosized CHA nanoparticles (i.e. below 100 nm) combined with the understanding of the seed-assisted crystallization mechanism has allowed the efficient preparation of Al-rich CHA materials using ultra-low methyltriethylammonium (MTEA) contents (MTEA/Si molar ratios ~ 0.03¿0.04), making this synthetic route very cost-competitive compared to recent synthesis improvements for CHA using substoichiometric contents of expensive OSDAs (i.e. N,N,N-trimethyladamantammonium, TMAda). The optimized Al-rich CHA materials, after incorporating the catalytically active copper cations, perform as ideal catalysts for the selective catalytic reduction (SCR) of NOx with ammonia relevant for heavy-duty applications., The authors acknowledge financial support by Umicore, Spanish Government through PID2021-122755OB-I00 funded by MCIN/AEI/10.13039/501100011033 and TED2021-130739B-I00 funded by MCIN/AEI/10.13039/501100011033/EU/PRTR, and by Generalitat Valenciana through AICO/2021/201. The authors are also thankful for the Severo Ochoa financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S/funding by MCIN/AEI/10.13039/501100011033). E.B.-J. acknowledges the Spanish Government for a FPI scholarship (PRE2019-088360). The Electron Microscopy Service of the UPV is also acknowledged for their help in sample characterization
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Highly Stable Subnanometric PtIn Clusters for the Selective Dehydrogenation of Alkanes

  • Li, Chengeng
  • Meyer, Randall J.
  • Yacob, Sara
  • Gomez, Elaine
  • Lopez-Haro, Miguel
  • Calvino, José J.
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Serna Merino, Pedro Manuel
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Subnanometric PtIn clusters have been synthesized within pure silica MFI zeolites by post-synthetic incorporation of In to Pt@K-MFI. The optimized PtIn@K-MFI catalyst outcompetes state-of-the-art PtSn formulations in ethane and propane dehydrogenations, avoiding the need of large excess of Pt promoters and harsh reductive conditions., This work has been supported by the Spanish Government through PID2020113006-RB-I00 and PID2021-122755OB-I00, both funded by MCIN/AEI/10.13039/501100011033, PID2022-142312NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe". The authors are also thankful for the Severo Ochoa financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S/ funding by MCIN/AEI/10.13039/501100011033) and for the financial support by the Generalitat Valenciana through the Prometeo Program (CIPROM/2023/34). The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization. HRSTEM data were acquired at the DME-UCA node of the Spanish Unique Infrastructure for Electron Microscopy of Materials (ICTS ELECMI). We appreciate the support of ExxonMobil Technology and Engineering for our efforts in fundamental catalytic research. The XAS results were collected under the PUP-309462 carried out at the National Synchrotron Light Source II, a U.S. Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Brookhaven National Laboratory under Contract No. DE-AC02-98CH10886. RJM and PSM thank Eli Stavitski, Denis Leshchev and Dominik Wierzbicki for their support at the ISS beamline at NSLS-II. RJM and PSM also thank Corey Kaminsky and Alyssa Love of ExxonMobil for their help with collection of the XAS data.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Overcoming activity/stability tradeoffs in CO oxidation catalysis by Pt/CeO2

  • Bohigues-Vallet, Benjamín
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Serna Merino, Pedro Manuel
  • Rojas-Buzo, Sergio
  • Salusso, Davide
  • Xia, Yu
  • Bordiga, Silvia
  • Willhammar, Tom
[EN] The use of redox active metal oxides to support noble metals is critical in the design of highly-active CO oxidation catalysts for gas emissions control. Unfortunately, supports promoting the activity, such as CeO2, tend also to promote acute catalyst deactivation by turning highly-active metallic Pt clusters into less-active PtOx species, under practical reaction conditions (high-temperature and/or the excess of O2). This leads to a problematic activity/stability tradeoff where Pt/CeO2 catalysts, highly-active, and Pt on non-reducible supports, highly stable, are bookends. Herein, we report a method to trap Pt at V-shaped pockets/stepped sites of CeO2 that break this undesired correlation by showing both high activity and stability in the CO oxidation reaction. XAS, CO-DRIFT, XPS, HAADF-STEM, and DFT are used to infer that the generation of low order metallic Pt clusters connected to two crystallographic planes of the support is key to inhibit (deactivating) re-oxidation paths of the metal, as a result of the high-energy required to form disordered/distorted PtOx ensembles at these positions. This new material allows, thus, to operate outside the commonly observed, limiting, activity/stability tradeoff., This work has been supported by the Spanish Government through PID2021-122755OB-I00 funded by MCIN/AEI/10.13039/501100011033 and TED2021-130739B-I00 funded by MCIN/AEI/10.13039/501100011033/EU/PRTR and by the Generalitat Valenciana through the Prometeo Program (CIPROM/2023/34). The authors are also thankful for the Severo Ochoa financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S/funding by MCIN/AEI/10.13039/501100011033). B.B. acknowledges the Spanish Government for a Severo Ochoa FPI scholarship (PRE2022-102555). The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization. The ESRF is kindly acknowledged for providing XAS beamtime at the BM23 beamline. We thank Red Espanola de Supercomputacion RES for computational resources through QHS-2024-1-037 and QHS-2024-2-0015 projects, and V. Ganduglia-Pirovano for providing the CeO2-V model.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Computational Modeling of the Mobility, Stability, and Al Positioning Ability of Cyclic Cationic Organic Structure-Directing Agents in AEI Zeolite

  • Ferri-Vicedo, Pau
  • Cnudde, Pieter
  • Van Speybroeck, Veronique
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
[EN] The stability and mobility of a set of organic structure-directing agents (OSDAs) with different molecular geometries and charge distribution confined within the pear-like cavities of neutral and Al-containing models of AEI zeolites have been investigated by using static density functional theory calculations and ab initio molecular dynamics simulations. The objective is to identify the role of electrostatic interactions between the OSDAs' positive charge at N+ atoms and the anionic framework AlO4 - centers on the preferential stabilization of Al at specific crystallographic positions, opening the possibility to modulate the Al distribution in AEI zeolites. We find that several classical piperidinium-based OSDAs with diverse methyl-substituent patterns in the N-containing ring but a symmetrical charge distribution, as well as bulkier nonclassical azoniabicycle-heptane-based OSDAs with the positive charge asymmetrically located at one side of the molecule, behave similarly. All of them remain almost immobile at the center of the aei cavity along the simulations and always stabilize Al preferentially at the T1 crystallographic position. In contrast, an azabicyclo-octane-based OSDA with the positive charge located outside a cyclo-octane ring lacking substituents exhibits an enhanced mobility that includes full rotation within the aei cage and the ability to reach the regions of the cavity not accessible to the other OSDAs investigated. As a result, this highly mobile OSDA preferentially stabilizes Al in the T3 site, which might lead to differences in catalyst activity and stability for zeolite samples synthesized using this OSDA., This work has been supported by Spanish Government through PID2021-122755OB-I00 and TED2021-130739B-I00, by Generalitat Valenciana through the Prometeo Program (CIPROM/2023/34), and by CSIC through the I-link+ program (LINKA20381). The authors are also thankful for the Severo Ochoa financial support (CEX2021-001230-S). Red Espanola de Supercomputacion (RES) and Servei d'Informatica de la Universitat de Valencia (SIUV) are acknowledged for computational resources and technical support. P.F. thanks ITQ for his contract. P.C. thanks the Research Foundation Flanders (FWO-grant no. 1246922N) for financial support. V. V. S. thanks the Research Fund of Ghent University (BOF) for financial support. Computational resources and services used in this work were provided by the VSC (Flemish Supercomputer Centre), funded by Ghent University, the FWO, and the Flemish Government department EWI.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Catalytic behavior of ITQ-13 zeolite in benzene and toluene ethylation

  • Portilla Ovejero, Mª Teresa
  • Llopis, Francisco J.
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Martínez, Cristina|||0000-0002-4415-084X
  • Valencia Valencia, Susana|||0000-0001-7160-2795
[EN] The ITQ-13 zeolite (ITH) presents a three-dimensional channel system formed by channels delimited by rings of 9 and 10 tetrahedra (9MR and 10MR). This material has been studied as a catalyst in reactions of interest in the petrochemical industry, which are carried out on a commercial scale in the presence of medium-pore zeolites, such as the alkylation of benzene or toluene with ethylene or ethanol. Due to its acidic properties and its particular topology, zeolite ITQ-13 presents a comparable activity to that of ZSM-5 or MCM-22, employed at commercial scale, but also higher selectivity to the main alkylation products and lower deactivation rate. The large cavities located at the intersections between the 9MR and 10MR channels, capable of hosting larger reaction intermediates than ZSM-5, and the greater activity of its external surface, could be responsible for the improved catalytic behavior of ITQ-13., Financial support by the Spanish Ministry of Science and Innovation is gratefully acknowledged (CEX2021-001230-S, PID2021-1227550B-I00 and PID2022-136934OB-100 grants funded by MCIN/AEI/10.13039/501100011033; and TED2021-130191B-C41 grant funded by the European Union NextGenerationEU/PRTR) . The authors thank also the financial support of the Generalitat Valenciana through the Prometeo Program (CIPROM/2023/34 and Prometeo 2021/077) . Finally, the authors acknowledge the Electron Microscopy Service of the Universitat Politecnica de Valencia (UPV) for assistance in electron microscopy characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Advances and perspectives from a decade of collaborative efforts on zeolites for selective catalytic reduction of NOx

  • Vennestrøm, Peter N.R.
  • Thogersen, Joakim R.
  • Gabrielsson, Pär L. T.
  • van Tendeloo, Leen
  • Schütze, Frank W.
  • Moliner Marin, Manuel|||0000-0002-5440-716X
[EN] Nitrogen oxides (NOx) is a major air pollutant and its release is regulated by increasingly stringent legislation. Selective catalytic reduction using ammonia as a reductant (NH3-SCR) is the most widely applied method to reduce NOx from diesel vehicle exhaust. Significant technological achievements have been developed in the last 10-15 years to minimize NOx by NH3-SCR, particularly using Cu-containing small-pore zeolites as active and stable catalysts. In the present perspective, we highlight some of the most noteworthy advances achieved by industry and academia on the understanding of the unique reaction mechanism of NH3-SCR over Cu-zeolites. With the increased understanding, researchers have been able to rationalize the design and realization of new Cu-zeolite catalysts. Although light-duty diesel vehicles will be electrified in the near future, heavy-duty diesel vehicles will continue to play a large role in future powertrain solutions even beyond 2030. Hence, we highlight some of the challenges and perspectives moving forward., This work has been supported by Umicore and by the Spanish Government through PID2021-122755OB-I00 funded by MCIN/AEI/10.13039/501100011033 and TED2021-130739B-I00 funded by MCIN/AEI/10.13039/501100011033/EU/PRTR, and by Generalitat Valenciana through AICO/2021/201.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Phosphorus Control and Recovery in Anthropogenic Wetlands Using Their Green Waste-Validation of an Adsorbent Mixture Model

  • González Romero, Juan Andrés|||0000-0001-9986-9854
  • Mengual Cuquerella, Jesús|||0000-0002-8507-509X
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
[EN] The deterioration of freshwater ecosystems in anthropogenic wetlands is intensified due to phosphorus inputs from fertilizers applied in agricultural areas. In addition, managing the excess green waste generated in these ecosystems increases the complexity of the problem. To move towards a sustainable society based on the circular economy, the use of controlled combustion of green waste to obtain bioenergy-followed by the application of the resulting ash for phosphorus removal from freshwater bodies via adsorption processes-should be considered. Furthermore, those ashes could be used as natural fertilizers and incorporated into the cultivated fields. This paper presents a deep study of the adsorption of phosphorus ions using ashes from the main green waste produced in wetlands. Various experiments were conducted to determine the effects of different variables in the removal process. A double kinetic model was necessary to explain the presence of two different removal processes. The Langmuir model described the equilibrium isotherm data of both adsorbents through an endothermic process. Acidic pH in the initial solutions was preferred because it promotes phosphorus removal by calcium dissolution. The alkalinity did not have a substantial effect on the adsorbent capacity. Calcium was the element that had a more significant influence on the overall process. Finally, a removal study using blended materials was performed. A combined model was proposed and validated based on the original isotherm models for the pure materials., This research was partially funded by the Spanish government-Ministerio de Ciencia, Innovacion y Universidades, through project PID2021-122755OB-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

ZeoSyn: A Comprehensive Zeolite Synthesis Dataset Enabling Machine-Learning Rationalization of Hydrothermal Parameters

  • Pan, Elton
  • Kwon, Soonhyoung
  • Jensen, Zach
  • Xie, Mingrou
  • Gómez-Bombarelli, Rafael
  • Román-Leshkov, Yuriy
  • Olivetti, Elsa
  • Moliner Marin, Manuel|||0000-0002-5440-716X
[EN] Zeolites, nanoporous aluminosilicates with well-defined porous structures, are versatile materials with applications in catalysis, gas separation, and ion exchange. Hydrothermal synthesis is widely used for zeolite production, offering control over composition, crystallinity, and pore size. However, the intricate interplay of synthesis parameters necessitates a comprehensive understanding of synthesis-structure relationships to optimize the synthesis process. Hitherto, public zeolite synthesis databases only contain a subset of parameters and are small in scale, comprising up to a few thousand synthesis routes. We present ZeoSyn, a dataset of 23,961 zeolite hydrothermal synthesis routes, encompassing 233 zeolite topologies and 921 organic structure-directing agents (OSDAs). Each synthesis route comprises comprehensive synthesis parameters: 1) gel composition, 2) reaction conditions, 3) OSDAs, and 4) zeolite products. Using ZeoSyn, we develop a machine learning classifier to predict the resultant zeolite given a synthesis route with >70% accuracy. We employ SHapley Additive exPlanations (SHAP) to uncover key synthesis parameters for >200 zeolite frameworks. We introduce an aggregation approach to extend SHAP to all building units. We demonstrate applications of this approach to phase-selective and intergrowth synthesis. This comprehensive analysis illuminates the synthesis parameters pivotal in driving zeolite crystallization, offering the potential to guide the synthesis of desired zeolites., The authors acknowledge funding from the Spanish Government through the contracts PID2021-122755OB-I00 funded by MCIN/AEI/10.13039/501100011033, TED2021-130739B-I00 funded by MCIN/AEI/10.13039/501100011033/EU/PRTR, and Severo Ochoa Center of Excellence program (CEX2021-001230-S). The authors also acknowledge partial funding from the National Science Foundation DMREF Awards 1922090, 1922311, and 1922372; the Office of Naval Research (ONR) under contract N00014-20-1-2280; Kwanjeong Educational Fellowship; MIT International Science, Technology Initiatives (MISTI) Seed Funds; and the Agency for Science, Technology and Research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

One-Pot Synthesis of CHA/ERI-Type Zeolite Intergrowth from a Single Multiselective Organic Structure-Directing Agent

  • Kwon, Soonhyoung
  • Ikonnikova, Evgeniia
  • Lee, Hwajun
  • Schwalbe-Koda, Daniel
  • Willhammar, Tom
  • Olivetti, Elsa A.
  • Gomez-Bombarelli, Rafael
  • Román-Leshkov, Yuriy
  • Bello-Jurado, Estefanía
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Moliner Marin, Manuel|||0000-0002-5440-716X
[EN] We report the one-pot synthesis of a chabazite (CHA)/erionite (ERI)-type zeolite intergrowth structure characterized by adjustable extents of intergrowth enrichment and Si/Al molar ratios. This method utilizes readily synthesizable 6-azaspiro[5.6]dodecan-6-ium as the exclusive organic structure-directing agent (OSDA) within a potassium-dominant environment. High-throughput simulations were used to accurately determine the templating energy and molecular shape, facilitating the selection of an optimally biselective OSDA from among thousands of prospective candidates. The coexistence of the crystal phases, forming a distinct structure comprising disk-like CHA regions bridged by ERI-rich pillars, was corroborated via rigorous powder X-ray diffraction and integrated differential-phase contrast scanning transmission electron microscopy (iDPC S/TEM) analyses. iDPC S/TEM imaging further revealed the presence of single offretite layers dispersed within the ERI phase. The ratio of crystal phases between CHA and ERI in this type of intergrowth could be varied systematically by changing both the OSDA/Si and K/Si ratios. Two intergrown zeolite samples with different Si/Al molar ratios were tested for the selective catalytic reduction (SCR) of NOx with NH3, showing competitive catalytic performance and hydrothermal stability compared to that of the industry-standard commercial NH3-SCR catalyst, Cu-SSZ-13, prevalent in automotive applications. Collectively, this work underscores the potential of our approach for the synthesis and optimization of adjustable intergrown zeolite structures, offering competitive alternatives for key industrial processes., [EN] S.K. acknowledges partial funding from Designing Materials to Revolutionize and Engineer our Future (DMREF) from the National Science Foundation (NSF) 1922311, 1922372, and 1922090 awards. S.K. was additionally funded by the Kwanjeong Educational Fellowship. T.W. and E.I. acknowledge financial support from the Swedish Research Council (grant no. 2019-05465) and the Swedish Research Council for Sustainable Development, FORMAS (grant no. 2022-01270). E.B., A.C., and M.M. acknowledge funding from the Spanish Government through PID2021-122755OB-I00 funded by MCIN/AEI/10.13039/501100011033 and TED2021-130739B-I00 funded by MCIN/AEI/10.13039/501100011033/EU/PRTR, and from Generalitat Valenciana through AICO/2021/201. The authors are also thankful for the Severo Ochoa financial support from the Spanish Ministry of Science and Innovation (CEX2021-001230-S/funding by MCIN/AEI/10.13039/501100011033). E.B. acknowledges the Spanish Government for an FPI scholarship (PRE2019-088360).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synergic Effect of Isolated Ce3+ and Ptδ+ Species in UiO-66(Ce) for Heterogeneous Catalysis

  • Rojas-Buzo, Sergio
  • Bohigues, Benjamin
  • Salusso, Davide
  • Corma, Avelino
  • Moliner Marín, Manuel
  • Bordiga, S.
In this work, we have synthesized through an efficient electrostatic deposition a Pt single-atom catalyst (SAC) supported on a Ce-MOF. The basic solution employed in the impregnation process favors the deprotonation of the hydroxyl groups allocated on the clusters that can easily interact with the cationic Pt species. The resulting material, denoted as Pt/UiO-66(Ce), shows an increment of Ce content, as demonstrated by UV-vis and Ce L-edge XANES spectroscopy. These Ce species and their corresponding oxygen vacancies are able to accommodate very disperse Pt single sites. Moreover, Pt L-edge XANES and CO-FTIR spectroscopy confirm the cationic nature of the supported Pt (2+ < δ < 4+). For comparison purpose, we have synthesized and characterized a well-known Pt single-site catalyst supported on nanocrystalline ceria, denoted as Pt/nCeO. Since the simultaneous presence of Ce and Pt on the MOF clusters were able to activate the oxygen molecules and the CO molecule, respectively, we tested Pt/UiO-66(Ce) for the CO oxidation reaction. Interestingly, this catalyst showed ∼six-fold increment in activity in comparison with the traditional Pt/nCeO material. Finally, the characterization after catalysis reveals that the Pt nature is preserved and that the activity is maintained during 14 h at 100 °C without any evidence of deactivation., S.R.-B. acknowledges the Margarita Salas grant financed by the Ministerio de Universidades, Spain, and also funded by the European Union-Next Generation EU. S.R.-B. and S.B. acknowledge support from the Project CH4.0 under the MUR program ″Dipartimenti di Eccellenza 2023-2027″ (CUP: D13C22003520001). B.B., A.C., and M.M. acknowledge the financial support of the Spanish Government through PID2021-122755OB-I00 funded by MCIN/AEI/10.13039/501100011033 and TED2021-130739B–I00 funded by MCIN/AEI/10.13039/501100011033/EU/PRTR), and of the Generalitat Valenciana through AICO/2021/201. B.B., A.C., and M.M. are also thankful for the Severo Ochoa financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S/funding by MCIN/AEI/10.13039/501100011033)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001230-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Minimizing rare earth content of FCC catalysts: Understanding the fundamentals on combined P-La stabilization

  • Martínez Sánchez, Cristina
  • Vidal-Moya, Alejandro
  • Yilmaz, Bilge
  • Kelkar, C.P.
  • Corma, Avelino
Fluidized Catalytic cracking (FCC) is one of the main conversion processes in conventional refineries and employs a multicomponent catalyst with Y zeolite as the main source of activity and selectivity towards value added products. In order to meet the severe requirements of the FCC unit, the hydrothermal stability of this large pore zeolite is traditionally improved by means of controlled hydrothermal treatments that can be combined with acid washing cycles, with rare earth (RE) ion exchange or with a combination of both. Phosphorus has also been described as a hydrothermal stabilization element. Although most of the studies are based on ZSM-5 zeolites, a new Y zeolite containing FCC catalyst, Phinesse, was developed recently. This catalyst, based on the partial substitution of RE by P allowed obtaining the same activity and the same yields to the main products as its conventional RE stabilized counterpart in the catalytic cracking of a vacuum gas oil (VGO). In this work, we present a systematic study where the hydrothermal stability of P- and La-free USYs with different dealumination degrees is compared with that of the corresponding USYs containing P or La alone or a combination of both stabilizing elements. The samples have been thoroughly characterized and their catalytic performance has been tested in a MAT unit. According to the results obtained, when using RE alone, only high contents (> 3.5 wt% RE) are able to stabilize the catalysts towards steaming under severe conditions (100% steam, 750 ºC). However, lower RE ( wt%) can lead to similar hydrothermal stabilization when combined with intermediate phosphorus contents (∼1.0 wt%). The results obtained provide the bases for understanding the reasons behind the benefits of this combined P-La stabilization observed for the commercial Phinesse™ catalyst as compared to a high REO catalyst., This work has been supported by BASF Corporation, by the Spanish Government through PID2021-122755OB-I00 and by the GVA through AICO/2021/201. Financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged. The authors thank Eva Briz for technical assistance and the Electron Microscopy Service of the UPV for their help in sample characterization., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001230-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Advances and perspectives from a decade of collaborative efforts on zeolites for selective catalytic reduction of NOx

  • Vennestrøm, Peter N.R.
  • Thøgersen, Joakim R.
  • Gabrielsson, P.L.T.
  • Van Tendeloo, Leen
  • Schütze, Frank-W.
  • Moliner Marín, Manuel
Nitrogen oxides (NO) is a major air pollutant and its release is regulated by increasingly stringent legislation. Selective catalytic reduction using ammonia as a reductant (NH-SCR) is the most widely applied method to reduce NO from diesel vehicle exhaust. Significant technological achievements have been developed in the last 10–15 years to minimize NO by NH-SCR, particularly using Cu-containing small-pore zeolites as active and stable catalysts. In the present perspective, we highlight some of the most noteworthy advances achieved by industry and academia on the understanding of the unique reaction mechanism of NH-SCR over Cu-zeolites. With the increased understanding, researchers have been able to rationalize the design and realization of new Cu-zeolite catalysts. Although light-duty diesel vehicles will be electrified in the near future, heavy-duty diesel vehicles will continue to play a large role in future powertrain solutions even beyond 2030. Hence, we highlight some of the challenges and perspectives moving forward., This work has been supported by Umicore and by the Spanish Government through PID2021-122755OB-I00 funded by MCIN/AEI/10.13039/501100011033 and TED2021-130739B-I00 funded by MCIN/AEI/10.13039/501100011033/EU/PRTR, and by Generalitat Valenciana through AICO/2021/201.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design of bi-functional Ni-zeolites for ethylene oligomerization: Controlling Ni speciation and zeolite properties by one-pot and post-synthetic Ni incorporation

  • Martínez Gómez-Aldaraví, Adrián
  • Paris Carrizo, Cecilia Gertrudis
  • Moliner Marín, Manuel
  • Martínez Sánchez, Cristina
The design of diverse Ni-zeolites has been performed attempting to control different physico-chemical properties of the zeolite supports as well as the Ni speciation to study their influence on the industrially relevant ethylene oligomerization reaction. In this sense, Ni-containing medium-pore MFI and large-pore BEA zeolites have been synthesized with different particle sizes, Si/Al molar ratios and following different Ni-incorporation strategies (one-pot versus post-synthesis). Characterization techniques reveal the preferential presence of cationic Ni and NiO nanoclusters inside the zeolitic pores when Ni has been incorporated by post-synthesis impregnation or one-pot approaches, respectively. The presence of Ni species, rather than other factors, mainly governs olefin oligomerization under near-ambient pressures, guiding preferentially towards C-C olefins as main products. Crystal size, acidity and/or Ni incorporation methodology, on the other hand, play key roles under high-pressure reaction conditions, resulting in the formation of heavier olefins, especially in zeolites containing less cationic nickel, larger proportion of NiO clusters and higher Brønsted acid site density., This work has been supported by Spanish Government through PID2021-122755OB-I00 funded by MCIN/AEI/10.13039/501100011033 and TED2021-130739B–I00 funded by MCIN/AEI/10.13039/501100011033/EU/PRTR), and by Generalitat Valenciana through AICO/2021/201. Financial support by Severo Ochoa centre of excellence program (CEX2021-001230-S) is also gratefully acknowledged. AMGA acknowledges the Spanish Government for a Severo Ochoa FPI scholarship (PRE2019-088361). J. M. Salas is acknowledged for his contribution to CO-IR experiments. The Electron Microscopy Service of the UPV is also acknowledged for their help in sample characterization., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001230-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Approaching enzymatic catalysis with zeolites or how to select one reaction mechanism competing with others

  • Ferri, Pau
  • Li, Chengeng
  • Schwalbe-Koda, Daniel
  • Xie, M.
  • Moliner Marín, Manuel
  • Gómez-Bombarelli, Rafael
  • Boronat, Mercedes
  • Corma, Avelino
Approaching the level of molecular recognition of enzymes with solid catalysts is a challenging goal, achieved in this work for the competing transalkylation and disproportionation of diethylbenzene catalyzed by acid zeolites. The key diaryl intermediates for the two competing reactions only differ in the number of ethyl substituents in the aromatic rings, and therefore finding a selective zeolite able to recognize this subtle difference requires an accurate balance of the stabilization of reaction intermediates and transition states inside the zeolite microporous voids. In this work we present a computational methodology that, by combining a fast high-throughput screeening of all zeolite structures able to stabilize the key intermediates with a more computationally demanding mechanistic study only on the most promising candidates, guides the selection of the zeolite structures to be synthesized. The methodology presented is validated experimentally and allows to go beyond the conventional criteria of zeolite shape-selectivity., This work has been supported by Spanish Government through CEX2021-001230-S, PID2020-112590GB-C21, PID2021-122755OB-I00 and TED2021-130739B-I00 (MCIN/AEI/FEDER, UE), by Generalitat Valenciana through AICO/2021/201, and CSIC through the I-link+ Program (LINKA20381). The authors thank Dr. María José Díaz-Cabañas and Dr. Pilar Cumplido for providing the ITQ-24 and ITQ-15 samples. The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization. Red Española de Supercomputación (RES) and Servei d’Informàtica de la Universitat de València (SIUV) are acknowledged for computational resources and technical support. P.F. and C.Li. thank ITQ for their contract. M. Xie thanks the Agency for Science, Technology and Research for funding. D Schwalbe-Koda acknowledges financial support from MIT Energy Initiative Fellowship. MIT Engaging cluster, and MIT Lincoln Lab Supercloud cluster at MGHPCC are gratefully acknowledged for computational resources and support. The authors thank the MIT-Spain INDITEX Circularity Seed Fund for financial support., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001230-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of Framework Composition and NH3 on the Diffusion of Cu+ in Cu-CHA Catalysts Predicted by Machine-Learning Accelerated Molecular Dynamics

  • Millán, Reisel
  • Bello-Jurado, Estefanía
  • Moliner Marín, Manuel
  • Boronat, Mercedes
  • Gomez-Bombarelli, Rafael
Cu-exchanged zeolites rely on mobile solvated Cu cations for their catalytic activity, but the role of the framework composition in transport is not fully understood. Ab initio molecular dynamics simulations can provide quantitative atomistic insight but are too computationally expensive to explore large length and time scales or diverse compositions. We report a machine-learning interatomic potential that accurately reproduces ab initio results and effectively generalizes to allow multinanosecond simulations of large supercells and diverse chemical compositions. Biased and unbiased simulations of [Cu(NH)] mobility show that aluminum pairing in eight-membered rings accelerates local hopping and demonstrate that increased NH concentration enhances long-range diffusion. The probability of finding two [Cu(NH)] complexes in the same cage, which is key for SCR-NOx reaction, increases with Cu content and Al content but does not correlate with the long-range mobility of Cu. Supporting experimental evidence was obtained from reactivity tests of Cu-CHA catalysts with a controlled chemical composition., R.M. acknowledges the Margarita Salas grant from the Ministerio de Universidades, Spain, funded by the European Union-Next Generation EU. The authors are grateful for computation time allocated on the MIT SuperCloud cluster, the MIT Engaging cluster at the Massachusetts Green High Performance Computing Center (MGHPCC), and Summit at the Oakridge Leadership Computing Facility through the 2021 ALCC DOE program. R.G-B. thanks the Jeffrey Cheah Career Development Chair. R.M thanks Gavin Winter for assistance during the training of NNP and processing of the MD simulations and Simon Axelrod for implementing PaiNN. M.B. and M.M. are grateful for financial support from the Spanish government through PID2020-112590GB-C21, PID2021-122755OB-I00, and TED2021-130739B-I00 (MCIN/AEI/FEDER, UE) and from CSIC through the I-link+ Program (LINKA20381). E.B.-J. acknowledges the Spanish government-MCIU for a FPI scholarship (PRE2019-088360). The Electron Microscopy Service of the UPV is acknowledged for help with sample characterization.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhancing nucleation to synthesize Al-rich CHA zeolites under ultra-low OSDA contents: Application for heavy-duty NH3-SCR of NOx

  • Bello-Jurado, Estefanía
  • Millet, Isabel
  • Van Tendeloo, Leen
  • Schütze, Frank-W.
  • Vennestrøm, Peter N.R.
  • Corma, Avelino
  • Moliner Marín, Manuel
The crystallization of Al-rich CHA zeolites with an ultra-low organic structure directing agent (OSDA) content and without using pre-crystallized FAU zeolites as Si and/or Al sources has been accomplished by controlling the nucleation step. Indeed, the use of “gel-type” seeds containing discrete nanosized CHA nanoparticles (i.e. below 100 nm) combined with the understanding of the seed-assisted crystallization mechanism has allowed the efficient preparation of Al-rich CHA materials using ultra-low methyltriethylammonium (MTEA) contents (MTEA/Si molar ratios ∼ 0.03–0.04), making this synthetic route very cost-competitive compared to recent synthesis improvements for CHA using substoichiometric contents of expensive OSDAs (i.e. N,N,N-trimethyladamantammonium, TMAda). The optimized Al-rich CHA materials, after incorporating the catalytically active copper cations, perform as ideal catalysts for the selective catalytic reduction (SCR) of NOx with ammonia relevant for heavy-duty applications., The authors acknowledge financial support by Umicore, by the Spanish Government through PID2021-122755OB-I00 funded by MCIN/AEI/10.13039/501100011033 and TED2021-130739B-I00 funded by MCIN/AEI/10.13039/501100011033/EU/PRTR, and by Generalitat Valenciana through AICO/2021/201. The authors are also thankful for the Severo Ochoa financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S/funding by MCIN/AEI/10.13039/501100011033). E.B.-J. acknowledges the Spanish Government for a FPI scholarship (PRE2019-088360). The Electron Microscopy Service of the UPV is also acknowledged for their help in sample characterization.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly Stable Subnanometric PtIn Clusters for the Selective Dehydrogenation of Alkanes

  • Li, Chengeng
  • Meyer, Randall J.
  • Yacob, Sara
  • Gomez, Elaine
  • Lopez-Haro, Miguel
  • Calvino, Jose J.
  • Moliner Marín, Manuel
  • Serna Merino, Pedro
  • Corma, Avelino
Subnanometric PtIn clusters have been synthesized within pure silica MFI zeolites by post-synthetic incorporation of In to Pt@K-MFI. The optimized PtIn@K-MFI catalyst outcompetes state-of-the-art PtSn formulations in ethane and propane dehydrogenations, avoiding the need of large excess of Pt promoters and harsh reductive conditions., This work has been supported by the Spanish Government through PID2020113006-RB-I00 and PID2021-122755OB-I00, both funded by MCIN/AEI/10.13039/501100011033, PID2022-142312NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. The authors are also thankful for the Severo Ochoa financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S/ funding by MCIN/AEI/10.13039/501100011033) and for the financial support by the Generalitat Valenciana through the Prometeo Program (CIPROM/2023/34). The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization. HRSTEM data were acquired at the DME-UCA node of the Spanish Unique Infrastructure for Electron Microscopy of Materials (ICTS ELECMI). We appreciate the support of ExxonMobil Technology and Engineering for our efforts in fundamental catalytic research. The XAS results were collected under the PUP-309462 carried out at the National Synchrotron Light Source II, a U.S. Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Brookhaven National Laboratory under Contract No. DE-AC02-98CH10886. RJM and PSM thank Eli Stavitski, Denis Leshchev and Dominik Wierzbicki for their support at the ISS beamline at NSLS-II. RJM and PSM also thank Corey Kaminsky and Alyssa Love of ExxonMobil for their help with collection of the XAS data.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

One-Pot Synthesis of CHA/ERI-Type Zeolite Intergrowth from a Single Multiselective Organic Structure-Directing Agent

  • Kwon, Soonhyoung
  • Bello-Jurado, Estefanía
  • Ikonnikova, Evgeniia
  • Lee, Hwajun
  • Schwalbe-Koda, Daniel
  • Corma, Avelino
  • Willhammar, Tom
  • Olivetti, Elsa A.
  • Gomez-Bombarelli, Rafael
  • Moliner Marín, Manuel
  • Román-Leshkov, Yuriy
We report the one-pot synthesis of a chabazite (CHA)/erionite (ERI)-type zeolite intergrowth structure characterized by adjustable extents of intergrowth enrichment and Si/Al molar ratios. This method utilizes readily synthesizable 6-azaspiro[5.6]dodecan-6-ium as the exclusive organic structure-directing agent (OSDA) within a potassium-dominant environment. High-throughput simulations were used to accurately determine the templating energy and molecular shape, facilitating the selection of an optimally biselective OSDA from among thousands of prospective candidates. The coexistence of the crystal phases, forming a distinct structure comprising disk-like CHA regions bridged by ERI-rich pillars, was corroborated via rigorous powder X-ray diffraction and integrated differential-phase contrast scanning transmission electron microscopy (iDPC S/TEM) analyses. iDPC S/TEM imaging further revealed the presence of single offretite layers dispersed within the ERI phase. The ratio of crystal phases between CHA and ERI in this type of intergrowth could be varied systematically by changing both the OSDA/Si and K/Si ratios. Two intergrown zeolite samples with different Si/Al molar ratios were tested for the selective catalytic reduction (SCR) of NO with NH, showing competitive catalytic performance and hydrothermal stability compared to that of the industry-standard commercial NH-SCR catalyst, Cu-SSZ-13, prevalent in automotive applications. Collectively, this work underscores the potential of our approach for the synthesis and optimization of adjustable intergrown zeolite structures, offering competitive alternatives for key industrial processes., S.K. acknowledges partial funding from Designing Materials to Revolutionize and Engineer our Future (DMREF) from the National Science Foundation (NSF) 1922311, 1922372, and 1922090 awards. S.K. was additionally funded by the Kwanjeong Educational Fellowship. T.W. and E.I. acknowledge financial support from the Swedish Research Council (grant no. 2019-05465) and the Swedish Research Council for Sustainable Development, FORMAS (grant no. 2022-01270). E.B., A.C., and M.M. acknowledge funding from the Spanish Government through PID2021-122755OB-I00 funded by MCIN/AEI/10.13039/501100011033 and TED2021-130739B-I00 funded by MCIN/AEI/10.13039/501100011033/EU/PRTR, and from Generalitat Valenciana through AICO/2021/201. The authors are also thankful for the Severo Ochoa financial support from the Spanish Ministry of Science and Innovation (CEX2021-001230-S/funding by MCIN/AEI/10.13039/501100011033). E.B. acknowledges the Spanish Government for an FPI scholarship (PRE2019-088360).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

ZeoSyn: A Comprehensive Zeolite Synthesis Dataset Enabling Machine-Learning Rationalization of Hydrothermal Parameters

  • Pan, Elton
  • Kwon, Soonhyoung
  • Jensen, Zach
  • Xie, Mingrou
  • Gómez-Bombarelli, Rafael
  • Moliner Marín, Manuel
  • Román-Leshkov, Yuriy
  • Olivetti, Elsa
Zeolites, nanoporous aluminosilicates with well-defined porous structures, are versatile materials with applications in catalysis, gas separation, and ion exchange. Hydrothermal synthesis is widely used for zeolite production, offering control over composition, crystallinity, and pore size. However, the intricate interplay of synthesis parameters necessitates a comprehensive understanding of synthesis-structure relationships to optimize the synthesis process. Hitherto, public zeolite synthesis databases only contain a subset of parameters and are small in scale, comprising up to a few thousand synthesis routes. We present ZeoSyn, a dataset of 23,961 zeolite hydrothermal synthesis routes, encompassing 233 zeolite topologies and 921 organic structure-directing agents (OSDAs). Each synthesis route comprises comprehensive synthesis parameters: 1) gel composition, 2) reaction conditions, 3) OSDAs, and 4) zeolite products. Using ZeoSyn, we develop a machine learning classifier to predict the resultant zeolite given a synthesis route with >70% accuracy. We employ SHapley Additive exPlanations (SHAP) to uncover key synthesis parameters for >200 zeolite frameworks. We introduce an aggregation approach to extend SHAP to all building units. We demonstrate applications of this approach to phase-selective and intergrowth synthesis. This comprehensive analysis illuminates the synthesis parameters pivotal in driving zeolite crystallization, offering the potential to guide the synthesis of desired zeolites. The dataset is available at https://github.com/eltonpan/zeosyn_dataset., The authors acknowledge funding from the Spanish Government through the contracts PID2021-122755OB-I00 funded by MCIN/AEI/10.13039/501100011033, TED2021-130739B-I00 funded by MCIN/AEI/10.13039/501100011033/EU/PRTR, and Severo Ochoa Center of Excellence program (CEX2021-001230-S). The authors also acknowledge partial funding from the National Science Foundation DMREF Awards 1922090, 1922311, and 1922372; the Office of Naval Research (ONR) under contract N00014-20-1-2280; Kwanjeong Educational Fellowship; MIT International Science, Technology Initiatives (MISTI) Seed Funds; and the Agency for Science, Technology and Research.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly Stable Subnanometric Pt Clusters in All Silica K-Doped Zeolites: Implications for the CO Oxidation Reaction

  • Bohigues, Benjamin
  • Millet, Isabel
  • Concepción, Patricia
  • Corma, Avelino
  • Moliner Marín, Manuel
  • Serna Merino, Pedro
Small metal clusters can provide improved catalytic activity compared with single metal atoms and larger metal nanoparticles of the same element. The stabilization of metal ensembles of a few atoms is extremely challenging, however, because reductive sintering and oxidative fragmentation are phenomena that often occur at low temperatures in reactive atmospheres. In this regard, the CO oxidation reaction is particularly challenging because CO tends to aggregate noble metals on nonreducible supports, such as SiO, whereas O triggers the formation of (less active) single atoms on reducible supports, such as CeO. Accordingly, state-of-the-art Pt/CeO catalysts undergo severe deactivation under practical CO oxidation conditions in excess of O. In this contribution, we report a highly active CO oxidation catalyst that is able to overcome both sintering and fragmentation instabilities under conditions that make other alternatives fail. The catalyst is based on small Pt clusters inside K-MFI that benefit from both strong metal/support interactions at defective sites of the zeolite and strong electronic promotion by the support, to attain highly stable, highly active, electron-rich Pt clusters., This work has been supported by the Spanish Government through PID2021-122755OB-I00 funded by MCIN/AEI/10.13039/501100011033 and TED2021-130739B-I00 funded by MCIN/AEI/10.13039/501100011033/EU/PRTR and by the Generalitat Valenciana by the Prometeo Program (CIPROM/2023/34). The authors are also thankful for the Severo Ochoa financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S/funding by MCIN/AEI/10.13039/501100011033). B.B. acknowledges the Spanish Government for a Severo Ochoa FPI scholarship (PRE2022-102555). The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization.