Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effects of cage topology on ethylene adsorption mechanism in silver exchanged CHA and RHO zeolites: An Inelastic Neutron Scattering and Density Functional study

  • De Marcos-Galán, Alessandra
  • E Silva de Almeida, Gabrielli Maria
  • Martinez-Ortigosa, Joaquin
  • Jiménez-Ruiz, M.
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Blasco Lanzuela, Teresa|||0000-0002-8115-4241
[EN] Zeolite-based adsorbents have been successfully used for many challenging separations due to their tunable properties. A particularly notable application involves the separation of light olefins from paraffins, wherein the molecular sieving properties of zeolites play a pivotal role. Additionally, the selective interaction of alkenes with transition metal cations, positioned within the channels and cavities of microporous zeolites, further enhances separation capabilities. This study aims to comprehensively characterize the interactions between ethylene and Ag exchanged zeolites, employing a multidisciplinary approach, combining Inelastic Neutron Scattering (INS), Infrared (IR) spectroscopy, Nuclear Magnetic Resonance (NMR), UV¿Vis and Density Functional Theory (DFT) calculations. CHA and RHO, zeolites largely applied in gas separation processes, were chosen due to their similar small pore sizes and pore volume, but different cavity shapes and flexibilities. The interpretation of derived DFT Electron Density Difference, experimentally supported by 13C Solid State NMR results, provide an understanding of each framework¿s role during the charge transfer mechanisms between ethylene and transition metal species. Specific deformations in the flexible framework of zeolite RHO explain a blueshift of the band at 400 cm¿1 in the librational region of INS spectra compared to CHA. This structural change in RHO, represented by the conic shape of the cage 8-ring side pockets, increases steric effects over the adsorbate while rendering the metallic adsorption center less exposed within the zeolite¿s cavity, finally leading to a weaker adsorption energy. The redshift of C=C stretching frequencies observed by IR spectroscopy and DFT calculations, as well as C=C and C-H bond lengthening of ethylene confirm the formation of complexes on silver in both zeolites and allowed a further evaluation of the effects of the different frameworks cages on the aforementioned interaction., Financial support by the Spanish Ministry of Science and Innovation by MCIN/AEI/10.13039/501100011033 and "ERDF A way of making Europe" (Projects: CEX2021-001230-S, PID2022-136934OB-I00) is deeply acknowledged. The authors also thank the Spanish Ministry of Science and Innovation by MCIN /AEI /10.13039/501100011033 and "European Union Next Generation EU/PRTR" (Projects: TED2021-130191B-C41), Generalitat Valenciana, Spain (Project: Prometeo/2021/077) and "Advanced Materials Programme" of Generalitat Valenciana "European Union Next Generation EU/PRTR" (project: MFA/2022/047). All authors thank ILL for neutron beam-time allocation (experiments 7-05-488 and 7 05-522) and ILL C-Lab for computational support. G.A. thanks funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 847439. A.M.G. thanks funding of the grant No SEV 2016-0683-19-2 from Severo Ochoa programme .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Understanding the microscopic mechanism for the industrially relevant ethylene/ethane separation by silver-containing molecular sieves.

  • Almeida, Gabrielli
[ES] Esta tesis investiga los mecanismos microscópicos de la adsorción selectiva y difusión de etileno en zeolitas que contienen plata mediante una combinación de dispersión inelástica de neutrones (INS), dispersión cuasielástica de neutrones (QENS) y teoría funcional de densidad (DFT). Las zeolitas se han aplicado con éxito como materiales adsorbentes en varias separaciones desafiantes debido a sus propiedades físicas químicas notables y ajustables. Un uso particular está relacionado con la separación de alquenos de alcanos. Además de funcionar como tamices moleculares, la interacción selectiva del alqueno con los cationes de metales de transición ubicados en las cavidades de las zeolitas juega un papel crucial al mejorar la separación selectiva mediante un mecanismo conocido como complejación pi. La energía de unión de la complejación pi es intermedia entre una fisisorción fuerte y una quimisorción débil, lo que permite una alta selectividad y regenerabilidad de las moléculas adsorbidas en el sitio del metal de transición. Aunque se han publicado varios estudios sobre la adsorción de etileno en zeolitas con Ag, la mayoría se basan en técnicas experimentales o en predicciones puramente teóricas que no describen completamente el sistema bajo investigación. Por lo tanto, la interacción del etileno con la plata y los factores que determinan este mecanismo de adsorción selectiva y la difusión del etileno adsorbido en zeolitas con Ag aún no se comprenden completamente. La combinación de enfoques teóricos (DFT) y experimentales (INS y QENS) para estudiar la complejación pi de etileno en zeolitas de plata de poros pequeños CHA, RHO y LTA permite comprender las influencias de la geometría local de la estructura y entorno de los sitios Ag+ en la formación de complejos pi y difusión de la molecula. Además, este método puede extenderse a investigaciones en muchos materiales similares (sean otras zeolitas o diferentes sistemas microporosos) como una herramienta para proporcionar información cualitativa y cuantitativa satisfactoria., [CA] Esta tesi investiga els mecanismes microscòpics de l'adsorció selectiva i difusió d'etilé en zeolites que contenen plata mitjançant una combinació de dispersió inelàstica de neutrons (INS), dispersió cuasielástica de neutrons (QENS) i teoria funcional de densitat (DFT). Les zeolites s'han aplicat amb èxit com a materials adsorbents en diverses separacions desafiadores a causa de les seues propietats físiques químiques notables i ajustables. Un ús particular està relacionat amb la separació d'alquens d'alcans. A més de funcionar com a tamisos moleculars, la interacció selectiva de l'alqué amb els cations de metalls de transició situats en les cavitats de les zeolites juga un paper crucial en millorar la separació selectiva mitjançant un mecanisme conegut com a complexació pi. L'energia d'unió de la complexació pi és intermèdia entre una fisisorción forta i una quimisorción feble, la qual cosa permet una alta selectivitat i regenerabilidad de les molècules objectiu adsorbidas en el lloc del metall de transició. Encara que s'han publicat diversos estudis sobre l'adsorció d'etilé en zeolites con Ag, la majoria es basen en tècniques experimentals o en prediccions purament teòriques que no descriuen completament el sistema sota investigació. Per tant, la interacció de l'etilé amb la plata i els factors que determinen este mecanisme d'adsorció selectiva i la difusió de l'etilé adsorbido en zeolites con Ag encara no es comprenen completament. La combinació d'enfocaments teòrics (DFT) i experimentals (INS i QENS) per a estudiar la complexació $\pi$ d'etilé en zeolites de plata de porus xicotets CHA, RHO i LTA permet comprendre les influències de la geometria local de l'estructura i entorn dels llocs Ag+ en la formació de complexos pi i difusió. A més, este mètode pot estendre's a investigacions en molts materials similars (ja siguen altres zeolites o diferents sistemes microporosos) com una ferramenta per a proporcionar informació qualitativa i quantitativa satisfactòria., [EN] This thesis investigates the microscopic mechanisms of the selective adsorption and diffusion of ethylene on silver containing zeolites by a combination of Inelastic Neutron Scattering (INS), Quasielastic Neutron Scattering (QENS) and Density Functional Theory (DFT). Zeolites has been successfully applied as adsorbents materials to several challenging separations due to their remarkable and tunable chemical physical properties. One particular use is related to the separation of alkenes from alkanes. Apart from working as molecular sieves, the selective interaction of the alkene with transition metal cations located in the cavities of the zeolites plays a crucial role enhancing the selective separation by a mechanism known as pi-complexation. The pi-complexation binding energy is intermediate between a strong physisorption and a weak chemisorption, which allows high selectivity and regenerability of the targeted molecules adsorbed on the transition metal site. Although several studies have been published regarding the adsorption of ethylene on Ag-zeolites, most are based on experimental techniques or on purely theoretical predictions that do not completely describe the system under investigation. Therefore, the interaction of ethylene with silver and the factors that determine this selective adsorption mechanism and the diffusion of the adsorbed ethylene on Ag-zeolites are not fully understood yet. The combination of theoretical (DFT) and experimental (INS and QENS) approaches to study ethylene pi-complexation in silver small pore zeolites CHA, RHO and LTA allows to understand the influences of the local geometry of the framework and the neighboring chemical environment of the Ag+ sites on the formation of pi-complexes and diffusion of the molecule. Furthermore, this method may be extended to investigations in many alike materials (whether other zeolites or different microporous systems) as a tool to provide satisfactory qualitative and quantitative information., This thesis has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 847439 in the framework of the PhDdoctoral training InnovaXN.This project was apartnership between the InstitutLaue-Langevin(ILL) in Grenoble (France),the Instituto de Tecnología Química (ITQ) Universidad Politecnica de Valencia (Spain)and CepsaSA industry in Madrid,(Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

AgY zeolite as catalyst for the selective catalytic oxidation of NH3

  • Martinez-Ortigosa, Joaquin
  • Lopes, Christian W.
  • Agostini, Giovanni
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
  • Blasco Lanzuela, Teresa|||0000-0002-8115-4241
  • Rey Garcia, Fernando|||0000-0003-3227-5669
[EN] Ag-exchanged Y zeolites (Si/Al = 2.5; Ag/Al = 0.30-0.95) have been tested in the NH3-SCO reaction, the most promising method for the elimination of ammonia emissions, and deeply characterized before and after reaction by using a variety of techniques (XRD, TEM, UV-Vis, Ag-109 NMR, XAS spectroscopies). The most active centres for the NH3-SCO reaction are Ag-0 nanoparticles (NPs) formed under reduction conditions and both activity and selectivity to N-2 increase with the silver loading. The Ag-0 NPs are dramatically modified under reaction conditions, being most of them dispersed resulting in small clusters and even atomically Ag+ cations, the latter accounting for around half silver atoms. The presence of water into the reaction feed promotes the dispersion and oxidation of silver nanoparticles, but the catalyst performance is only slightly affected. The results are fully consistent with the previously proposed i-SCR mechanism for NH3-SCO reaction on silver catalysts., Financial support by the Ministerio de Ciencia e Innovacion (MICINN) of Spain through the Severo Ochoa (SEV-2016-0683) , RTI2018-101784-B-I00, RTI2018-09639-A-I00 and InnovaXN-26-2019 projects is gratefully acknowledged. The authors also thank the Microscopy Service of the Universitat Politecnica de Valencia for its assistance in microscopy characterization (TEM and FESEM equipment preparation) . C. W. Lopes (Science without Borders Process no. 13191/13-6) thanks CAPES for a predoctoral fellowship and J. Martinez-Ortigosa (SEV-2012-0267-02) is grateful to Severo Ochoa Program for a predoctoral fellowship. The authors also want to thank the ALBA synchrotron and CL AE SS beamline staff for providing beamtime (proposal 2017092477) and for setting the beamline up to perform these studies.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Automated astronaut traverses with minimum metabolic workload: Accessing permanently shadowed regions near the lunar south pole

  • Peña-Asensio, Eloy
  • Sutherland, Jennifer
  • Tripathi, Prateek
  • Mason, Kashauna
  • Goodwin, Arthur
  • Bickel, Valentin T.
  • Kring, David A.
The Artemis exploration zone is a topographically complex impact-cratered terrain. Steep undulating slopes pose a challenge for walking extravehicular activities (EVAs) anticipated for the Artemis III and subsequent missions. Using 5 m/pixel Lunar Orbiter Laser Altimeter (LOLA) measurements of the surface, an automated Python pipeline was developed to calculate traverse paths that minimize metabolic workload. The tool combines a Monte Carlo method with a minimum-cost path algorithm that assesses cumulative slope over distances between a lander and stations, as well as between stations. To illustrate the functionality of the tool, optimized paths to permanently shadowed regions (PSRs) are calculated around potential landing sites 001, nearby location 001(6), and 004, all within the Artemis III ‘Connecting Ridge’ candidate landing region. We identified 521 PSRs and computed (1) traverse paths to accessible PSRs within 2 km of the landing sites, and (2) optimized descents from host crater rims into each PSR. Slopes are limited to 15° and previously identified boulders are avoided. Surface temperature, astronaut body illumination, regolith bearing capacity, and astronaut-to-lander direct view are simultaneously evaluated. Travel times are estimated using Apollo 12 and 14 walking EVA data. A total of 20 and 19 PSRs are accessible from sites 001 and 001(6), respectively, four of which maintain slopes <10°. Site 004 provides access to 11 PSRs, albeit with higher EVA workloads. From the crater rims, 94 % of PSRs can be accessed. All round-trip traverses from potential landing sites can be performed in under 2 h with a constant walk. Traverses and descents to PSRs are compiled in an atlas to support Artemis mission planning., E. P. A. thanks funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (grant agreement No. 865657). J. S. is supported by funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 847439. We thank the LRO team for their efforts to acquire the data used in this study, as well as the staff at the Lunar and Planetary Institute for their support during an Exploration Science internship through the Center for Lunar Science and Exploration, where this research was conducted. We are also grateful to Bo Wu for generating the 1 m/pixel DEM and Sarah Boazman for sharing the boulder locations. This work was supported by NASA Solar System Exploration Research Virtual Institute (80NSSC20M0016, PI D.A.K.). LPI Contribution No. 3009. LPI is operated by the Universities Space Research Association., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Additive-specific modulation of non-classical nucleation pathways

  • Baken, Annet
  • Fernández-Martinez, Alejandro
  • Lanson, Martine
  • Aretxabaleta, Xavier M.
  • Manzano, Hegoi
  • Kellermeier, Matthias
  • Di Michiel, Marco
  • Van Driessche, Alexander E. S.
Additives, comprising small quantities of organic and inorganic molecules, are crucial for controlling the crystallisation of various (bio)materials; however, their mechanisms remain poorly understood. By integrating in situ high-energy X-ray scattering with potentiometric titrations, we examine the impact of industrially relevant additives on the nucleation pathways of portlandite and gypsum. While both minerals undergo multistep nucleation, portlandite transitions gradually from a disordered to an ordered phase, whereas gypsum exhibits an abrupt transition. These distinct non-classical pathways and their pH conditions correlate with the mineral-specific effects of the additives. Additive effects extend beyond the classical models, such as cation-binding, exerting influence primarily during the prenucleation stage. Moreover, additives demonstrate a dual role by simultaneously delaying and accelerating different stages of nucleation, highlighting their multifaceted impact on the crystallisation process. These findings offer insights for designing tailored additives to optimise industrial crystallisation processes and advance the understanding of biomineralisation mechanisms., A.E.S.V.D. acknowledges funding from the Consejería de Universidad, Investigación e Innovación, the competent authority in R&D of the Junta de Andalucía, through project PROYEXCEL 00771—SMART-water and the “Ministerio de Ciencia e Innovación” (TED2021-130860B-I00). H.M. and X.M.A. were supported by the “Departamento de Educación, Política Lingüística y Cultura del Gobierno Vasco” (Grant No. IT1458-22), the “Ministerio de Ciencia e Innovación” (TED2021-130860B-I00), H.M. and X.M.A. thank for technical and human support provided by SGIker (UPV/EHU/ ERDF, EU). A.B. received funding from Marie Skłodowska-Curie Actions under grant agreement No 847439 (InnovaXN); A.B. received a grant from Labex OSUG (Investissements d’avenir—ANR10 LABX56); A.B. received a grant from IdEx, financed by the University Grenoble-Alpes., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

The “Historical Materials BAG”: A new facilitated access to synchrotron X-ray diffraction analyses for cultural heritage materials at the European Synchrotron Radiation Facility

  • Cotte, Marine
  • Gonzalez, Victor
  • Vanmeert, Frederik
  • Jiménez García, Nuria|||0000-0002-3737-1900
  • Albert Tortosa, Francesc|||0000-0003-3024-1342
  • Salvadó Cabré, Nativitat|||0000-0003-2266-2390
  • Janssens, Koen
(This article belongs to the Special Issue Advances in Analytical Strategies to Study Cultural Heritage Samples), The European Synchrotron Radiation Facility (ESRF) has recently commissioned the new Extremely Brilliant Source (EBS). The gain in brightness as well as the continuous development of beamline instruments boosts the beamline performances, in particular in terms of accelerated data acquisition. This has motivated the development of new access modes as an alternative to standard proposals for access to beamtime, in particular via the “block allocation group” (BAG) mode. Here, we present the recently implemented “historical materials BAG”: a community proposal giving to 10 European institutes the opportunity for guaranteed beamtime at two X-ray powder diffraction (XRPD) beamlines—ID13, for 2D high lateral resolution XRPD mapping, and ID22 for high angular resolution XRPD bulk analyses—with a particular focus on applications to cultural heritage. The capabilities offered by these instruments, the specific hardware and software developments to facilitate and speed-up data acquisition and data processing are detailed, and the first results from this new access are illustrated with recent applications to pigments, paintings, ceramics and wood., The Historical materials BAG has been implemented with support from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 870313, Streamline, which also supports APC. L. H. is funded via the PANOSC project (European Union’s Horizon 2020 Research and Innovation programme under Grant Agreement No. 823852). I. F. is funded by a grant from the Marie Skłodowska-Curie COFUND Programme “InnovaXN” (contract number 847439 with the European Commission). The ESRF beamtime was granted through the peer-review BAG proposal HG-172 at ID13 and ID22 and in-house beamtime at ID21. The project on wood vessels received financial support from MINECO (Spain), Ref. PID2019-105823RB-I00. The project on cadmium red pigments was financially supported from the Horizon 2020 project IPERION-HS (H2020-INFRAIA-2019-1, GA No. 871034) and the Italian project AMIS (Dipartimenti di Eccellenza 2018–2022, funded by MIUR and Perugia University). V.G. has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 945298-ParisRegionFP. E.A.C. and K.J. would like to acknowledge the project Smart*Light funded by the Interreg V Flanders-Netherlands program with financial support from the European Regional Development Fund (ERDF) for funding in assessing the damage caused by X-rays to model paints. K.J. acknowledges FWO (Brussels) for financial support through grants G054719N and I001919N. F.V. and K.J. acknowledge BELSPO (Brussels) for funding of the FEDtWIN mandate Macro-Imaging. C.C. (Christelle Chauffeton) is grateful to the Fondation Bettencourt-Schueller and the Cité de la Céramique Sèvres-Limoges, France for founding her work in the frame of her PhD thesis. A part of this study has been funded by the Grant-in-Aid for Scientific Research [18700680], JSPS Grant-in-Aid for Young Scientists (B) from the Ministry of Education, Culture, Sports, Science and Technology of Japan., Peer Reviewed, Article signat per 28 autors/es: Marine Cotte, Victor Gonzalez, Frederik Vanmeert, Letizia Monico, Catherine Dejoie, Manfred Burghammer, Loïc Huder, Wout de Nolf, Stuart Fisher, Ida Fazlic, Christelle Chauffeton, Gilles Wallez, Núria Jiménez, Francesc Albert-Tortosa, Nati Salvadó, Elena Possenti, Chiara Colombo, Marta Ghirardello, Daniela Comelli, Ermanno Avranovich Clerici, Riccardo Vivani, Aldo Romani, Claudio Costantino, Koen Janssens, Yoko Taniguchi, Joanne McCarthy, Harald Reichert and Jean Susini.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

The “Historical Materials BAG”: A new facilitated access to synchrotron X-ray diffraction analyses for cultural heritage materials at the European Synchrotron Radiation Facility

  • Cotte, Marine
  • Gonzalez, Victor
  • Vanmeert, Frederik
  • Jiménez García, Nuria
  • Albert Tortosa, Francesc
  • Salvadó Cabré, Nativitat
  • Janssens, Koen
(This article belongs to the Special Issue Advances in Analytical Strategies to Study Cultural Heritage Samples), The European Synchrotron Radiation Facility (ESRF) has recently commissioned the new Extremely Brilliant Source (EBS). The gain in brightness as well as the continuous development of beamline instruments boosts the beamline performances, in particular in terms of accelerated data acquisition. This has motivated the development of new access modes as an alternative to standard proposals for access to beamtime, in particular via the “block allocation group” (BAG) mode. Here, we present the recently implemented “historical materials BAG”: a community proposal giving to 10 European institutes the opportunity for guaranteed beamtime at two X-ray powder diffraction (XRPD) beamlines—ID13, for 2D high lateral resolution XRPD mapping, and ID22 for high angular resolution XRPD bulk analyses—with a particular focus on applications to cultural heritage. The capabilities offered by these instruments, the specific hardware and software developments to facilitate and speed-up data acquisition and data processing are detailed, and the first results from this new access are illustrated with recent applications to pigments, paintings, ceramics and wood., The Historical materials BAG has been implemented with support from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 870313, Streamline, which also supports APC. L. H. is funded via the PANOSC project (European Union’s Horizon 2020 Research and Innovation programme under Grant Agreement No. 823852). I. F. is funded by a grant from the Marie Skłodowska-Curie COFUND Programme “InnovaXN” (contract number 847439 with the European Commission). The ESRF beamtime was granted through the peer-review BAG proposal HG-172 at ID13 and ID22 and in-house beamtime at ID21. The project on wood vessels received financial support from MINECO (Spain), Ref. PID2019-105823RB-I00. The project on cadmium red pigments was financially supported from the Horizon 2020 project IPERION-HS (H2020-INFRAIA-2019-1, GA No. 871034) and the Italian project AMIS (Dipartimenti di Eccellenza 2018–2022, funded by MIUR and Perugia University). V.G. has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 945298-ParisRegionFP. E.A.C. and K.J. would like to acknowledge the project Smart*Light funded by the Interreg V Flanders-Netherlands program with financial support from the European Regional Development Fund (ERDF) for funding in assessing the damage caused by X-rays to model paints. K.J. acknowledges FWO (Brussels) for financial support through grants G054719N and I001919N. F.V. and K.J. acknowledge BELSPO (Brussels) for funding of the FEDtWIN mandate Macro-Imaging. C.C. (Christelle Chauffeton) is grateful to the Fondation Bettencourt-Schueller and the Cité de la Céramique Sèvres-Limoges, France for founding her work in the frame of her PhD thesis. A part of this study has been funded by the Grant-in-Aid for Scientific Research [18700680], JSPS Grant-in-Aid for Young Scientists (B) from the Ministry of Education, Culture, Sports, Science and Technology of Japan., Peer Reviewed, Article signat per 28 autors/es: Marine Cotte, Victor Gonzalez, Frederik Vanmeert, Letizia Monico, Catherine Dejoie, Manfred Burghammer, Loïc Huder, Wout de Nolf, Stuart Fisher, Ida Fazlic, Christelle Chauffeton, Gilles Wallez, Núria Jiménez, Francesc Albert-Tortosa, Nati Salvadó, Elena Possenti, Chiara Colombo, Marta Ghirardello, Daniela Comelli, Ermanno Avranovich Clerici, Riccardo Vivani, Aldo Romani, Claudio Costantino, Koen Janssens, Yoko Taniguchi, Joanne McCarthy, Harald Reichert and Jean Susini., Postprint (published version)
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Automated astronaut traverses with minimum metabolic workload, Accessing permanently shadowed regions near the lunar south pole

  • Peña-Asensio, Eloy|||0000-0002-7257-2150
  • Sutherland, Jennifer
  • Tripathi, Prateek|||0000-0001-8261-5719
  • Mason, Kashauna
  • Goodwin, Arthur|||0000-0003-2839-629X
  • Bickel, Valentin Tertius|||0000-0002-7914-2516
  • Kring, David A.
The Artemis exploration zone is a topographically complex impact-cratered terrain. Steep undulating slopes pose a challenge for walking extravehicular activities (EVAs) anticipated for the Artemis III and subsequent missions. Using 5 m/pixel Lunar Orbiter Laser Altimeter (LOLA) measurements of the surface, an automated Python pipeline was developed to calculate traverse paths that minimize metabolic workload. The tool combines a Monte Carlo method with a minimum-cost path algorithm that assesses cumulative slope over distances between a lander and stations, as well as between stations. To illustrate the functionality of the tool, optimized paths to permanently shadowed regions (PSRs) are calculated around potential landing sites 001, nearby location 001(6), and 004, all within the Artemis III 'Connecting Ridge' candidate landing region. We identified 521 PSRs and computed (1) traverse paths to accessible PSRs within 2 km of the landing sites, and (2) optimized descents from host crater rims into each PSR. Slopes are limited to 15° and previously identified boulders are avoided. Surface temperature, astronaut body illumination, regolith bearing capacity, and astronaut-to-lander direct view are simultaneously evaluated. Travel times are estimated using Apollo 12 and 14 walking EVA data. A total of 20 and 19 PSRs are accessible from sites 001 and 001(6), respectively, four of which maintain slopes <10°. Site 004 provides access to 11 PSRs, albeit with higher EVA workloads. From the crater rims, 94 % of PSRs can be accessed. All round-trip traverses from potential landing sites can be performed in under 2 h with a constant walk. Traverses and descents to PSRs are compiled in an atlas to support Artemis mission planning.