Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 68
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Binding energies of ethanol and ethylamine on interstellar water ices, synergy between theory and experiments

  • Perrero, Jessica|||0000-0003-2161-9120
  • Vitorino, Julie|||0000-0003-2502-487X
  • Congiu, Emanuele|||0000-0003-0313-826X
  • Ugliengo, Piero|||0000-0001-8886-9832
  • Rimola, Albert|||0000-0002-9637-4554
  • Dulieu, François|||0000-0001-6981-0421
Experimental and computational chemistry are two disciplines used to conduct research in astrochemistry, providing essential reference data for both astronomical observations and modeling. These approaches not only mutually support each other, but also serve as complementary tools to overcome their respective limitations. Leveraging on such synergy, we characterized the binding energies (BEs) of ethanol (CHCHOH) and ethylamine (CHCHNH), two interstellar complex organic molecules (iCOMs), on crystalline and amorphous water ices through density functional theory (DFT) calculations and temperature-programmed desorption (TPD) experiments. Experimentally, CHCHOH and CHCHNH behave similarly, in which desorption temperatures are higher on the water ices than on a bare gold surface. Computed cohesive energies of pure ethanol and ethylamine bulk structures allow describing of the BEs of the pure species deposited on the gold surface, as extracted from the TPD curve analyses. The BEs of submonolayer coverages of CHCHOH and CHCHNH on the water ices cannot be directly extracted from TPD due to their co-desorption with water, but they are computed through DFT calculations, and found to be greater than the cohesive energy of water. The behaviour of CHCHOH and CHCHNH is different when depositing adsorbate multilayers on the amorphous ice, in that, according to their computed cohesive energies, ethylamine layers present weaker interactions compared to ethanol and water. Finally, from the computed BEs of ethanol, ethylamine and water, we can infer that the snow-lines of these three species in protoplanetary disks will be situated at different distances from the central star. It appears that a fraction of ethanol and ethylamine is already frozen on the grains in the water snow-lines, causing their incorporation in water-rich planetesimals.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Binding Energies of N-bearing Species on Interstellar Water Ice Mantles by Quantum Chemical Calculations

  • Martínez-Bachs, Berta|||0000-0002-1290-7019
  • Ferrero, Stefano|||0000-0001-7819-7657
  • Ceccarelli, Cecilia|||0000-0001-9664-6292
  • Ugliengo, Piero|||0000-0001-8886-9832
  • Rimola, Albert|||0000-0002-9637-4554
Of the about 300 gas-phase molecular species so far detected in the interstellar medium (ISM), mostly via observations of their rotational lines, around 40% contain nitrogen (N) atoms. Likewise, of the less than a dozen interstellar molecules, firmly or likely detected in the solid-state water-dominated icy matrix by means of infrared observations, two bear N. A crucial parameter that regulates whether a species is in the gas or adsorbed on the icy phase is their binding energy (BE) toward the icy grain. Therefore, an accurate quantification of the BE is of paramount importance to properly model the ISM chemistry through numerical models. However, very few BEs are available in the literature, either determined experimentally or theoretically. In the present study, we calculate the BEs of 21 among the most abundant interstellar N-bearing species. We adopted two structural water ice models, representing a crystalline and an amorphous surface, using a reliable cost-effective procedure based on the density functional theory. While on the crystalline surface model only one BE per species is obtained due to the high symmetry of the unit cell, on the amorphous model from 5 to 10 BEs are obtained, due to its richer surface morphological variety. Most of our computed BEs agree with available experimental and other computational values. Finally, we discuss how the newly computed BEs can help estimate which N-bearing species can be frozen at the water snow line and, therefore, incorporated in water-rich ice planetesimals.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Theoretical modelling of the adsorption of neutral and charged sulphur-bearing species on to olivine nanoclusters

  • Perrero, Jessica|||0000-0003-2161-9120
  • Beitia-Antero, Leire|||0000-0003-0833-4075
  • Fuente, Asunción|||0000-0001-6317-6343
  • Ugliengo, Piero|||0000-0001-8886-9832
  • Rimola, Albert|||0000-0002-9637-4554
Sulphur depletion in the interstellar medium (ISM) is a long-standing issue, as only 1 per cent of its cosmic abundance is detected in dense molecular clouds (MCs), while it does not appear to be depleted in other environments. In addition to gas phase species, MCs also contain interstellar dust grains, which are irregular, micron-sized, solid aggregates of carbonaceous materials, and/or silicates. Grains provide a surface where species can meet, accrete, and react. Although freeze-out of sulphur on to dust grains could explain its depletion, only OCS and, tentatively, SO2 were observed on their surfaces. Therefore, it is our aim to investigate the interaction between sulphur-containing species and the exposed mineral core of the grains at a stage prior to when sulphur depletion is observed. Here, the grain core is represented by olivine nanoclusters, one of the most abundant minerals in the ISM, with composition Mg4Si2O8 and Mg3FeSi2O8. We performed a series of quantum mechanical calculations to characterize the adsorption of nine S-bearing species, both neutral and charged, on to the nanoclusters. Our calculations reveal that the Fe-S interaction is preferred to Mg-S, causing sometimes the chemisorption of the adsorbate. These species are more strongly adsorbed on the bare dust grain silicate cores than on water ice mantles, and hence therefore likely sticking on the surface of grains forming part of the grain core. This demonstrates that the interaction of bare grains with sulphur species in cloud envelopes can determine the S-depletion observed in dense molecular clouds.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Computational Study on the Water Corrosion Process at Schreibersite (Fe2NiP) Surfaces, from Phosphide to Phosphates

  • Pantaleone, Stefano|||0000-0002-2457-1065
  • Corno, Marta|||0000-0001-7248-2705
  • Rimola, Albert|||0000-0002-9637-4554
  • Balucani, Nadia|||0000-0001-5121-5683
  • Ugliengo, Piero|||0000-0001-8886-9832
Phosphorus (P) is a fundamental element for whatever form of life, in the same way as the other biogenic macroelements (SONCH). The prebiotic origin of P is still a matter of debate, as the phosphates present on earth are trapped in almost insoluble solid matrixes (apatites) and, therefore, hardly available for inclusion in living systems in the prebiotic era. The most accepted theories regard a possible exogenous origin during the Archean Era, through the meteoritic bombardment, when tons of reactive P in the form of phosphide ((Fe,Ni)3P, schreibersite mineral) reached the primordial earth, reacting with water and providing oxygenated phosphorus compounds (including phosphates). In the last 20 years, laboratory experiments demonstrated that the corrosion process of schreibersite by water indeed leads to reactive phosphates that, in turn, react with other biological building blocks (nucleosides and simple sugars) to form more complex molecules (nucleotides and complex sugars). In the present paper, we study the water corrosion of different crystalline surfaces of schreibersite by means of periodic DFT (density functional theory) simulations. Our results show that water adsorbs molecularly on the most stable (110) surface but dissociates on the less stable (001) one, giving rise to further reactivity. Indeed, subsequent water adsorptions, up to the water monolayer coverage, show that, on the (001) surface, iron and nickel atoms are the first species undergoing the corrosion process and, in a second stage, the phosphorus atoms also get involved. When adsorbing up to three and four water molecules per unit cell, the most stable structures found are the phosphite and phosphate forms of phosphorus, respectively. Simulation of the vibrational spectra of the considered reaction products revealed that the experimental band at 2423 cm-1 attributed to the P-H stretching frequency is indeed predicted for a phosphite moiety attached to the schreibersite (001) surface upon chemisorption of up to three water molecules.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Adsorption of HCN on cosmic silicates, a periodic quantum mechanical study

  • Bancone, Niccolò|||0009-0005-0593-9150
  • Pantaleone, Stefano|||0000-0002-2457-1065
  • Ugliengo, Piero|||0000-0001-8886-9832
  • Rimola, Albert|||0000-0002-9637-4554
  • Corno, Marta|||0000-0001-7248-2705
Hydrogen cyanide (HCN) represents a small but widely distributed fraction of the interstellar molecules, and it has been observed in all the environments characterizing the formation of a new planetary system. HCN can polymerize to form biomolecules, including adenine (H5C5N5), and it has drawn attention as a possible precursor of several building blocks of life due to the presence of its polymerization products in meteorites, comets and other asteroidal bodies. To elucidate the potential catalytic role that cosmic silicates have played in these processes, we have investigated, at DFT-PBE level inclusive of a posteriori dispersion correction, the energetic and spectroscopic features of the adsorption of HCN molecules on the most relevant crystalline surfaces of the mineral forsterite (Mg2SiO4), a common silicate constituent of the interstellar core grains and planetary rocky bodies. The results reveal that HCN adsorbs both in molecular and dissociative ways, within a wide range of adsorption energies (-29.4 to -466.4 kJ mol-1). Thermodynamic and kinetic results show that dissociative adsorption is dominant already at low temperatures, a fact particularly relevant at the protoplanetary conditions (i.e., the latest stages in the star system formation process). The simulated spectroscopic features of the studied adducts show a wide range of different degrees of perturbation of C-H and C[triple bond, length as m-dash]N bonds. This finding agrees with previous experimental works, and our results confirm that a complex chemistry is observed when this astrochemically-relevant molecule interacts with Mg2SiO4, which may be associated with a considerable potential reactivity towards the formation of relevant prebiotic compounds.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Olivine-catalyzed glycolaldehyde and sugar synthesis under aqueous conditions, Application to prebiotic chemistry

  • Vinogradoff, Vassilissa
  • Leyva, Vanessa
  • Mates-Torres, Eric|||0000-0001-9002-7669
  • Pepino, Raphael
  • Danger, Grégoire
  • Rimola, Albert|||0000-0002-9637-4554
  • Cazals, Lauryane
  • Serra, Coline
  • Pascal, Robert
  • Meinert, Cornelia
The presence of minerals in the prebiotic environment likely shaped the evolution of organic matter, thereby contributing to the emergence of prebiotic systems. Records of such systems are lacking and the interactions between abiotic organic matter and primary minerals remain poorly understood. Here, we demonstrate the ability of olivine silicates, in simulated early Earth or planetary aqueous environments, to catalyse glycolaldehyde formation from only formaldehyde, and help producing sugars that are essential components for life, through the formose reaction. By combining comprehensive gas chromatography analyses on experimental samples with quantum chemical simulations, we provide a mechanism for an olivine-catalyzed glycolaldehyde formation. Our findings suggest that olivine plays a triple role in the formose chemical network: maintaining an alkaline pH, enabling the initiation step towards the formation of glycoladehyde (which is typically the most challenging step) and promoting the autocatalytic cycle. These results open-up new scenarios on the impact of primary minerals on the evolution of chemical pathways in aqueous environments that were probably essential for the emergence of the first biomolecules.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Single-atom catalysis in space

  • Pareras, Gerard|||0000-0002-8435-3297
  • Cabedo Soto, Victoria|||0000-0002-6944-9207
  • McCoustra, Martin|||0000-0002-5716-110X
  • Rimola, Albert|||0000-0002-9637-4554
Context: The presence of grains is key to the synthesis of molecules in the interstellar medium that cannot form in the gas phase due to its low density and temperature conditions. In these reactions, the role of the grains is to enhance the encounter rate of the reactive species on their surfaces and to dissipate the energy excess of largely exothermic reactions, but less is known about their role as chemical catalysts; namely, bodies that provide low activation energy pathways with enhanced reaction rates. Different refractory materials with catalytic properties, such as those containing space-abundant d-block transition metals like iron (Fe), are present in astrophysical environments. Aims: Here, we report for first time mechanistic insights into the Fischer-Tropsch-type (FTT) synthesis of ethanol (CH3CH2OH), through ketene (CH2CO) and acetaldehyde (CH3CHO) intermediates, and methane (CH4) via a chain growing mechanism using a single-Fe atom supported on silica (SiO2) surfaces as a heterogeneous astrocatalyst. Methods: Quantum chemical simulations based on extended periodic surfaces were carried out to characterize the potential energy surfaces of the FTT chain growing mechanism. Calculations of the binding energies of reaction intermediates and products and Rice-Ramsperger-Kassel-Marcus kinetic calculations were performed to evaluate catalytic efficiencies and determine the feasibility of the reactions in different astrophysical environments. Results: Mechanistic studies demonstrate that the FTT chain growing mechanism enters into direct competition with FTT methanol formation, since formation of the CH2 chain growth initiator is feasible. The coupling of the CH2 with CO (forming ketene) and subsequent H2 additions yield acetaldehyde and finally ethanol, while direct H2 addition to CH2 produces methane. Thermodynamically, both processes are largely exergonic, but they present energy barriers that require external energy inputs to be overcome. Kinetic calculations demonstrate the strong temperature dependency of the FTT processes as tunneling does not dominate. Conclusions: The results could explain the presence of CH3CH2OH and CH4 in diverse astrophysical regions where current models fail to reproduce their observational quantities. The evidence that the chain growing mechanism is operating opens a new reactivity paradigm toward the formation of complex organic molecules, which is constrained by the temperature-dependent behaviour of the FTT reactions and by making their energy features a crucial aspect.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Exploring Forsterite Surface Catalysis in HCN Polymerization, Computational Insights for Astrobiology and Prebiotic Chemistry

  • Bancone, Niccolò|||0009-0005-0593-9150
  • Pantaleone, Stefano|||0000-0002-2457-1065
  • Ugliengo, Piero|||0000-0001-8886-9832
  • Rimola, Albert|||0000-0002-9637-4554
  • Corno, Marta|||0000-0001-7248-2705
Understanding the catalytic role of cosmic mineral surfaces is crucial for elucidating the chemical evolution needed for the emergence of life on Earth and other planetary systems. In this study, the catalytic role of silicate forsterite (Mg2SiO4) surfaces in the synthesis of iminoacetonitrile (IAN, HN=CH-CN) from the condensation of two hydrogen cyanide (HCN) molecules is investigated through quantum mechanical simulations. Using density functional theory calculations, the potential energy surfaces alongside the kinetics of various surface-mediated reactions leading to the formation of IAN are characterized. The effectiveness of forsterite as a catalyst is a delicate balance of the surface reactivity: on one side, the deprotonation of HCN is mandatory to trigger the dimerization; on the other side, the species should be weakly bound to the surface, thus allowing for their diffusion to meet with each other. The work reveals interesting counterintuitive results: the (120) and (101) forsterite surfaces (the less reactive ones) exhibit favorable catalytic properties for the reaction, in detriment to the (111) one (one of the most reactive). The implications of these findings in the astrobiology and prebiotic chemistry fields and for laboratory experiments are discussed, highlighting the potential role of cosmic silicates in the synthesis of complex organic molecules.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Machine learning applications on lunar meteorite minerals, From classification to mechanical properties prediction

  • Peña-Asensio, Eloy|||0000-0002-7257-2150
  • Trigo-Rodríguez, Josep M.
  • Sort, Jordi|||0000-0003-1213-3639
  • Ibañez-Insa, Jordi|||0000-0002-8909-6541
  • Rimola, Albert|||0000-0002-9637-4554
Amid the scarcity of lunar meteorites and the imperative to preserve their scientific value, non-destructive testing methods are essential. This translates into the application of microscale rock mechanics experiments and scanning electron microscopy for surface composition analysis. This study explores the application of Machine Learning algorithms in predicting the mineralogical and mechanical properties of DHOFAR 1084, JAH 838, and NWA 11444 lunar meteorites based solely on their atomic percentage compositions. Leveraging a prior-data fitted network model, we achieved near-perfect classification scores for meteorites, mineral groups, and individual minerals. The regressor models, notably the K-Neighbor model, provided an outstanding estimate of the mechanical properties-previously measured by nanoindentation tests-such as hardness, reduced Young's modulus, and elastic recovery. Further considerations on the nature and physical properties of the minerals forming these meteorites, including porosity, crystal orientation, or shock degree, are essential for refining predictions. Our findings underscore the potential of Machine Learning in enhancing mineral identification and mechanical property estimation in lunar exploration, which pave the way for new advancements and quick assessments in extraterrestrial mineral mining, processing, and research.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Comprehensive atomistic simulations of Fischer-Tropsch in outer space, astrocatalysis by Fe13-supported nanoclusters on SiO2

  • Pareras, Gerard|||0000-0002-8435-3297
  • Cabedo Soto, Victoria|||0000-0002-6944-9207
  • McCoustra, Martin|||0000-0002-5716-110X
  • Rimola, Albert|||0000-0002-9637-4554
Catalytic processes are fundamental not only to terrestrial chemistry (e.g., in the synthesis of fuels, chemicals, and pharmaceuticals) but also to extraterrestrial chemistry, contributing to chemical reactions occurring in various astrophysical environments. In space, gas-phase reactions are limited due to sparse energy sources and the absence of a medium for energy dissipation, making heterogeneous catalysis on cosmic dust grains essential for driving chemical transformations. Iron nanoclusters (FeNCs) embedded on these grains present intriguing catalytic properties, especially for Fischer-Tropsch-type (FTT) reactions that synthesize interstellar organic compounds. This study investigates the formation of short-chain alcohols (CHOH and CHCHOH) and hydrocarbons (CH, CHCH and CHCH) through a FTT mechanism using as astrocatalyst a realistic model of an Fe nanocluster supported on a silica (SiO) surface (Fe@SiO) by characterizing the potential energy surfaces (PESs) and performing kinetics calculations. Comprehensive PESs grounded on density functional theory (DFT) reveal that direct CO dissociation on Fe@SiO (required to form CHCHOH and CH) is energetically unfavorable, but subsequent H addition facilitates CO bond cleavage, thus competing with the formation of CHOH. Moreover, kinetic analysis indicates that C-O dissociation is more favorable than CHOH synthesis, enabling chain-growing-based processes. Kinetics also predicts that the temperatures at which the FTT reactions can operate (i.e., above 100 K) are those available in protostellar regions and in evolved stages during a Solar-type planetary system formation (e.g., protoplanetary disks and primitive planetary environments).These findings offer a new proof on the feasibility of Astrocatalysis (namely, true chemical catalysis in astrophysical environments), in this case exerted by FeNCs, which partly alleviate stringent conditions required for FT on Earth, this way proposing a potential FTT-supported catalysis under milder conditions in astrochemical contexts.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Predicting accurate binding energies and vibrational spectroscopic features of interstellar icy species. A quantum mechanical study

  • Bulik, Alicja|||0009-0002-8594-8054
  • Martínez-Bachs, Berta|||0000-0002-1290-7019
  • Bancone, Niccolò|||0009-0005-0593-9150
  • Mates-Torres, Eric|||0000-0001-9002-7669
  • Corno, Marta|||0000-0001-7248-2705
  • Ugliengo, Piero|||0000-0001-8886-9832
  • Rimola, Albert|||0000-0002-9637-4554
In the coldest, densest regions of the interstellar medium (ISM), dust grains are covered by thick ice mantles dominated mainly by water. Although more than 300 species have been detected in the gas phase of the ISM by their rotational emission lines within the radio frequency range, only a few were found in interstellar ices, e.g. CO, CO, NH, CHOH, CH and OCS, by means of infrared (IR) spectroscopy. Observations of ices require a background-illuminating source for absorption, constraining the available sight lines for investigation. Further challenges arise when comparing with laboratory spectra due to the influence of temperature, ice structure and the presence of other species. In the era of IR observations provided by the James Webb space telescope (JWST), it is crucial to provide reference spectral data confirming JWST's assigned features. For this purpose, this study addresses the adsorption of the aforementioned species on water ice surfaces and their IR features by means of quantum chemical computations grounded on the density functional theory (DFT) hybrid B3LYP-D3(BJ) functional, known to give reliable results for binding energy and vibrational frequency calculations, including IR spectra simulation. The calculated binding energies and IR spectral data are presented in the context of experimental spectra of ices and the new findings from the JWST, which have already proven to be insightful thanks to its unmatched sensitivity. We show that quantum chemistry is a powerful tool for accurate frequency calculations of ISM ice interfaces, providing unprecedented insights into their IR signatures.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Mapping adsorption on ionic surfaces via a pairwise potential-based high-throughput approach

  • Mates-Torres, Eric|||0000-0001-9002-7669
  • Ugliengo, Piero|||0000-0001-8886-9832
  • Rimola, Albert|||0000-0002-9637-4554
Understanding molecular adsorption on ionic surfaces is crucial for a variety of chemical applications, from heterogeneous catalysis to prebiotic chemistry. Traditional approaches for identifying adsorption sites often rely on computationally expensive methods such as density functional theory (DFT), which limits their applicability to chemically complex surfaces. In this work, we propose an automated high-throughput approach to obtain a complete picture of the adsorbate-surface interaction by means of pairwise Coulomb and Lennard-Jones potentials. Using a grid-based surface scan to calculate per-site potential energies of adsorption, this method efficiently predicts global adsorption minima and all potential binding modes of a surface-adsorbate system, with the only user input being the surface CIF. Our approach is validated by studying formaldehyde (HCO) adsorption on forsterite (MgSiO), a common silicate, and l-cysteine adsorption on cadmium sulfide (CdS). The predicted adsorption configurations and energies are compared with DFT values in the literature, showing good agreement and confirming the accuracy of our method. Our workflow provides a rapid means of exploring large configurational spaces and identifying stable adsorption structures, making it particularly useful for complex surfaces with multiple interaction sites. The simplicity of the model, combined with its accuracy, suggest it could be employed to discover new catalytic pathways on chemically complex ionic surfaces.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Revealing SO2 and CO2 adsorption features on forsterite via IR spectroscopy and automated computational approaches

  • Mates-Torres, Eric|||0000-0001-9002-7669
  • Escolano Casado, G.|||0000-0002-1996-1253
  • Mino, Lorenzo|||0000-0002-9882-8361
  • Balucani, Nadia|||0000-0001-5121-5683
  • Ugliengo, Piero|||0000-0001-8886-9832
  • Rimola, Albert|||0000-0002-9637-4554
The interaction between interstellar molecules and silicate dust plays a critical role in the chemical evolution of interstellar and circumstellar environments. In this work, we combine in situ infrared (IR) spectroscopy with automated density functional theory (DFT) calculations to investigate the adsorption and vibrational signatures of CO and SO on forsterite surfaces. Experimental IR spectra collected under cryogenic conditions reveal coverage- and temperature-dependent features that evolve from physisorbed to chemisorbed regimes. To interpret these observations, we construct theoretical spectra from a large ensemble of adsorption configurations across multiple surface terminations, weighted by their Boltzmann distributions at 100 K and by a per-surface abundance factor. The resulting spectra reproduce key experimental features, enabling the identification of binding trends. For CO, we predict the transition from weakly bound species to carbonate-like modes at lower frequencies. For SO, our simulations identify the dominant bands due to bidentate and tridentate chemisorption. This integrative approach highlights the importance of surface morphology and thermodynamic weighting in reconciling theory and experiments providing a framework for the spectroscopic analysis of molecular adsorption on interstellar dust analogs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Energy partitioning in H2 formation on interstellar carbonaceous grains. Insights from ab initio molecular dynamics simulations

  • Jubert, Léana|||0009-0008-3217-4802
  • Martínez-Bachs, Berta|||0000-0002-1290-7019
  • Pareras, Gerard|||0000-0002-8435-3297
  • Rimola, Albert|||0000-0002-9637-4554
Molecular hydrogen (H) stands as the most abundant molecule within the interstellar medium (ISM), primarily originating from the coupling of two H atoms on the surfaces of dust grains. The role of dust grains during the H formation is of third bodies, dissipating the nascent reaction energy and thereby stabilizing the newly formed molecule and preventing it from dissociating back. Whether the formed H remains adsorbed or not on the surface (in this latter case undergoing chemical desorption, CD) largely depends on the type of grain and its capability to absorb the reaction energy excess. In diffuse interstellar clouds, dust grains are typically bare and are composed primarily of silicates or carbonaceous materials, while in denser regions they are covered in ices mostly of water. While water-ice-covered grains have been elucidated to be efficient third bodies, the behavior of carbonaceous grains is still unknown. In this study, ab initio molecular dynamics (AIMD) simulations are employed to analyze how the reaction energy is distributed between the newly formed H and a large graphene slab, as a model of carbonaceous grains in diffuse clouds, and assess the feasibility of CD. The results indicate that only a fraction of the reaction energy is absorbed by the surface, leaving the newly formed H with sufficient internal energy for CD to occur.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Atomistic Modeling of Methyl Formate and Glycolaldehyde Formation on Interstellar Dirty Ice Mantles via a "Radical + Ice" Mechanism

  • Perrero, Jessica|||0000-0003-2161-9120
  • Pantaleone, Stefano|||0000-0002-2457-1065
  • Ugliengo, Piero|||0000-0001-8886-9832
  • Rimola, Albert|||0000-0002-9637-4554
Methylformate (MF) and glycolaldehyde (GA) are two primogenital organic molecules detected in both cold and warm regions of the interstellar medium (ISM). Both gas-phase and grain-surface pathways have been proposed to explain their abundances, yet uncertainties remain, since prevailing grain-surface mechanisms favor the formation of GA over MF, which mismatch observations in different ISM regions. In this work, MF and GA synthetic reactions are atomistically modeled on surfaces containing variable H (Formula presented.) O and CO percentages (interstellar dirty ices), in which one of the reactants coming from the gas phase reacts with an icy CO, thus adopting the following two-step "radical + ice" mechanism: for MF, OCH (Formula presented.) + (Formula presented.) (Formula presented.) COOCH (Formula presented.) + H (Formula presented.) HCOOCH (Formula presented.); for GA, CH (Formula presented.) OH + (Formula presented.) (Formula presented.) COCH (Formula presented.) OH + H (Formula presented.) HCOCH (Formula presented.) OH. Calculations show that the first step presents an energy barrier (32-38 kJ mol (Formula presented.) for MF and 17-20 kJ mol (Formula presented.) for GA), while the second step is nearly barrierless. Although the energetics favor GA formation, the observed abundances are better explained by desorption phenomena rather than reaction barriers are argued. Specifically, the weaker binding energies of MF (16.8-46.1 kJ mol (Formula presented.)) than GA (28.4-90.2 kJ mol (Formula presented.)) support its higher abundance in the ISM.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Unraveling the Interface Chemistry between HCN and Cosmic Silicates by the Interplay of Infrared Spectroscopy and Quantum Chemical Modeling

  • Bancone, Niccolò|||0009-0005-0593-9150
  • Santalucia, Rosangela
  • Pantaleone, Stefano|||0000-0002-2457-1065
  • Ugliengo, Piero|||0000-0001-8886-9832
  • Mino, Lorenzo|||0000-0002-9882-8361
  • Rimola, Albert|||0000-0002-9637-4554
  • Corno, Marta|||0000-0001-7248-2705
Understanding the interaction between hydrogen cyanide (HCN) and silicate surfaces is crucial for elucidating the prebiotic processes occurring on interstellar grain cores as well as in cometary and meteoritic matrices. In this study, we characterized the adsorption features of HCN on crystalline forsterite (MgSiO) surfaces, one of the most abundant cosmic silicates, by combining experimental infrared spectra at low temperatures (100-150 K) with periodic DFT simulations. Results showed the coexistence of both molecular and dissociative HCN adsorption complexes as a function of the considered forsterite crystalline face. Molecular adsorptions dominate on the most stable surfaces, while dissociative adsorptions occur predominantly on surfaces of lower stability, catalyzed by the enhanced Lewis acid-base behavior of surface-exposed Mg-O ion pairs. On the whole set of adsorption cases, harmonic frequency calculations were carried out and compared with the experimental infrared bands. To disentangle each vibrational mode contributing to the experimental broad bands, we run the best nonlinear fit between the predicted set of frequencies and the experimental bands. The outcome of this procedure allowed us to (i) deconvolute the experimental IR spectrum by assigning computed normal modes of vibrations to the main features of each band and (ii) reveal which crystal faces are responsible for the largest contribution to the adsorbate vibrational bands, giving information about the morphology of the samples. The present straightforward procedure is quite general and of broad interest in the fine characterization of the infrared spectra of adsorbates on complex inorganic material surfaces.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Cosmic Silicate Surfaces Catalizing Prebiotic Reactions: Atomistic Modeling on the Polymerization of HCN

  • Bancone, Niccolò|||0009-0005-0593-9150
  • Pantaleone, Stefano|||0000-0002-2457-1065
  • Pareras, Gerard|||0000-0002-8435-3297
  • Ugliengo, Piero|||0000-0001-8886-9832
  • Rimola, Albert|||0000-0002-9637-4554
  • Corno, Marta|||0000-0001-7248-2705
Hydrogen cyanide, HCN, is a fundamental building block in astro- and cosmochemical environments, known for its ability to form prebiotically relevant molecules such as nucleobases. Although its polymerization is inhibited under the cold, dilute conditions of the interstellar medium, the higher temperatures of more evolved rocky bodies, combined with the presence of mineral surfaces, can catalyze the reaction. In this study, we use atomistic simulations grounded on the density functional theory (DFT) to elucidate the complete tetramerization pathway of HCN to diaminomaleonitrile (DAMN) and diaminofumaronitrile (DAFN), catalyzed by the crystalline Mg2SiO4 forsterite (120) surface. Results demonstrate that the intrinsic acid-base properties of the surface facilitate chemical bond formation/cleavage needed for HCN oligomerization, lowering activation barriers by ∼120-220 kJ mol-1 with respect to the gas-phase. Kinetic analyses reveal that the reactions are feasible at temperatures above 300 K, particularly under conditions present in warm, rocky bodies such as asteroids, meteorites, and planetary surfaces. The presence of water further accelerates key steps by assisting proton transfer processes. These findings support a model in which Mg-rich silicate minerals (abundant in the early Solar System) may have directly catalyzed the formation of complex organic molecules, which, in turn, are precursors of more complex biomolecules, thereby contributing to the essential chemical inventory for the emergence of life on early Earth and other primitive planets with propitious conditions.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Quantum mechanical investigation on the formation of silicate building blocks on interstellar ice mantles

  • Gelli, Andreha|||0009-0001-5741-7638
  • Perrero, Jessica|||0000-0003-2161-9120
  • Ferero, S.
  • Enrique-Romero, Joan|||0000-0002-2147-7735
  • Ceccarelli, Cecilia|||0000-0001-9664-6292
  • Ugliengo, Piero|||0000-0001-8886-9832
  • Balucani, Nadia|||0000-0001-5121-5683
  • Rimola, Albert|||0000-0002-9637-4554
Silicon monoxide (SiO), a diatomic molecule present in the interstellar medium, probably contributes to the formation of silicate dust grains since orthosilicic acid (Si(OH)4 ), a SiO derivative, is a precursor of silica and silicates. The formation of Si(OH)4 is investigated here by means of quantum chemical computations, characterizing the interaction and reactivity of SiO with water ice mantles (modelled through different cluster systems) that coat interstellar dust grains in dense clouds. Several reaction pathways involving SiO and H2 O were simulated with the aim of forming Si(OH)2 and subsequently Si(OH)4 . Results highlight that the ice mantle not only supplies a reactant, H2 O, but also acts as a chemical catalyst, reducing the energy barrier of the process. The formation of the Si(OH)2 precursor is a crucial step, occurring easily by reaction of SiO with H2 O. Subsequently, both the Si(OH)2 + O --→ OSi(OH)2 + H2 O ---→ Si(OH)4 and Si(OH)2 + 2 O --→ O2 Si(OH)2 + 2 H --→ Si(OH)4 paths have been found to be energetically favourable towards Si(OH)4 formation due to being barrierless, although formation of H2 Si(OH)2 by H addition to Si(OH)2 is a potential competitive channel. This study provides evidence that orthosilicic acid can form due to the addition of H2 O, O, and H to SiO on water ice mantles, indicating that silicate grains can potentially form and grow in cold interstellar regions, in addition to originating from material ejected by asymptotic giant branch stars and supernovae remnants. Our results show that grain surface reactions in dense clouds are important not only in the synthesis of volatile molecular species but also in the formation of silicate refractory material precursors.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Gaseous methanol in cold environments, is thermal desorption from low binding energy sites the explanation?

  • Bariosco, Vittorio|||0009-0000-7269-8418
  • Tinacci, Lorenzo|||0000-0001-9909-9570
  • Pantaleone, Stefano|||0000-0002-2457-1065
  • Ceccarelli, Cecilia|||0000-0001-9664-6292
  • Rimola, Albert|||0000-0002-9637-4554
  • Ugliengo, Piero|||0000-0001-8886-9832
Methanol (CH 3 OH) is the simplest and most abundant interstellar complex organic molecule (iCOM) observed in warm and cold environments. It is thought to be formed on the surfaces of dust grains and released into the gas-phase by thermal desorption of the ices in the warm regions where the dust temperature is high ( ≥100 K). Ho we ver, the presence of gaseous methanol in cold environments represented a challenge since its detection, e.g. in cold molecular clouds, prestellar cores, and protoplanetary discs. The reason is that thermal desorption was thought to be completely inefficient in these conditions. In this work, we show that this is not the case. Specifically, we present new calculations of the binding energy (BE) distribution on an iced grain composed of 200 water molecules. On this grain we obtained 223 unique sites with different BE. We found that the methanol BE distribution is well reproduced by a Gaussian function with a mean of 35.5 kJ mol -1 (4255 K) and a standard deviation of 13.0 kJ mol -1 (1558 K). To facilitate the incorporation of our calculations into astrochemical models, we provide a table with the fraction of sites as a function of the BE and the corresponding prefactors. Comparison with published experimental BE values suggests that they are dominated by the larger BE sites. Finally, and most importantly, our calculations show that 2 per cent of the BEs are around 10 kJ mol -1 (1240 K), implying that thermal desorption from these sites may explain the presence of gaseous methanol in cold environments.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Hot Sulfur on the Rocks: The Reaction of Electronically Excited Sulfur Atoms with Water in an Ice-Surface Model

  • Di Genova, Gabriella
  • Perrero, Jessica|||0000-0003-2161-9120
  • Rosi, Marzio|||0000-0002-1264-3877
  • Ceccarelli, Cecilia|||0000-0001-9664-6292
  • Rimola, Albert|||0000-0002-9637-4554
  • Balucani, Nadia|||0000-0001-5121-5683
In this contribution, we present a theoretical investigation of the reaction involving atomic sulfur in its first electronically excited state, 1D, and H2O on an ice-surface model. This study is motivated by the work of Giustini et al. (ACS Earth Space Chem., 2024, 8, 2318), which indicated a strong effect of the presence of four additional water molecules in the S(1D) + H2O reaction compared to the pure gas-phase case. Our simulation treats the long-range interactions (H-bonds and dispersion forces) with the ice water molecules in a much more realistic way being based on the use of a cluster of 18 water molecules, thus overcoming the limits of the small cluster used by Giustini et al. According to our results, S(1D) reacts via two possible reaction mechanisms: (1) addition to the O atom of a water molecule with the formation of H2OS or (2) insertion into one of the O-H bonds of a water molecule with the formation of HOSH. Both H2OS and HOSH are stabilized on ice by energy dissipation rather than isomerizing or dissociating into two products as seen in the gas-phase reaction. The interaction with surrounding water molecules affects the entire reaction pathway by stabilizing intermediate species, reducing some barriers, and impeding the only two-product open channel of the gas-phase reaction. S(1D) can be produced by UV-induced photodissociation of various precursor molecules on the surface of interstellar or cometary ice or by other high-energy processes induced by electrons or cosmic rays also in the ice bulk. Therefore, our results can be of help in elucidating the mysterious sulfur chemistry occurring in the icy mantles of interstellar grains or in cometary nuclei. Furthermore, this study demonstrates that the product branching ratios of gas-phase reactions should not be uncritically used in modeling interstellar ice chemistry.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Formation of the glycine isomer glycolamide (NH2C(O)CH2OH) on the surfaces of interstellar ice grains: Insights from atomistic simulations

  • Perrero, Jessica|||0000-0003-2161-9120
  • Alessandrini, Silvia|||0000-0003-3152-3261
  • Ye, H.
  • Puzzarini, Cristina|||0000-0002-2395-8532
  • Rimola, Albert|||0000-0002-9637-4554
Context. Syn-glycolamide, a glycine isomer, has recently been detected in the G+0.693-0.027 molecular cloud. Investigations into its formation in the interstellar medium could offer insights into synthetic routes leading to glycine in prebiotic environments. Aims. Quantum chemical simulations on glycolamide (NH2C(O)CH2OH) formation on interstellar ice mantles, mimicked by a water ice cluster model, are presented. Methods. In this paper, we modeled glycolamide synthesis considering a stepwise process: the coupling between formaldehyde (H2CO) and the radical of formamide (NH2CO•) occurs first, forming the glycolamide precursor NH2C(=O)CH2O•, which is then hydrogenated to give anti-glycolamide. We hypothesize that anti-to-syn interconversion occurs in conjunction with glycolamide desorption from the ice surface. Results. The reaction barrier for NH2C(O)CH2O• formation varies from 9 to 26 kJ mol-1, depending on surface binding sites. Kinetic studies indicate that this reaction step is feasible in environments with a T > 35 K, until desorption of the reactants. The hydrogenation step leading to anti-glycolamide presents almost no energy barrier due to the easy H atom diffusion toward the NH2C(O)CH2O• intermediate. However, it competes with the extraction of an H atom from the formyl group of NH2C(O)CH2O•, which leads to formyl formamide, NH2C(O)CHO, and H2. Nonetheless, according to our results, anti-glycolamide formation is predicted to be the most favored reactive channel.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Binding Energies of Interstellar Complex Organic Molecules on Water Ice Surfaces: A Quantum Chemical Investigation

  • Kakkar, Harjasnoor|||0000-0002-8984-2356
  • Martínez-Bachs, Berta|||0000-0002-1290-7019
  • Ceccarelli, Cecilia|||0000-0001-9664-6292
  • Ugliengo, Piero|||0000-0001-8886-9832
  • Rimola, Albert|||0000-0002-9637-4554
Interstellar dust grains are enveloped by ices of frozen molecules in cold, dense regions of the interstellar medium (ISM), which are also observed in the gas phase. Whether a species is in the solid or gaseous state is governed by its binding energy (BE) on the grains. Hence, BEs are crucial in the solid-to-gas transition and are key input parameters for astrochemical models that simulate the physicochemical processes leading to the evolution of chemistry in the ISM. About 40% of the currently detected interstellar molecules belong to the category of interstellar complex organic molecules (iCOMs). This work aims to accurately evaluate the BEs of 19 iCOMs by means of quantum chemical calculations. Atomistic surface models simulating the structures of both crystalline and amorphous water ice were employed adopting a periodic approach, thereby accounting for the hydrogen bond (H-bond) cooperativity imparted by the extensive network present in the surfaces. A cost-effective but reliable procedure based on density functional theory was used to predict the structures of the adsorption complexes and calculate their BEs, which are mainly driven by H-bond and dispersion interactions, the latter presenting a fair contribution. A final discussion on the astrophysical implications of the computed BEs and the importance of obtaining reliable BEs on realistic interstellar ice surfaces in relation to the snow lines of iCOMs in hot cores/corinos and protoplanetary disks is provided.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Is cosmic dust porous?

  • Potapov, Alexey|||0000-0002-3699-7477
  • McCoustra, Martin R. S.|||0000-0002-5716-110X
  • Tazaki, Ryo|||0000-0003-1451-6836
  • Bergin, Edwin A.|||0000-0003-4179-6394
  • Bromley, Stefan|||0000-0002-7037-0475
  • Garrod, Robin T.|||0000-0001-7723-8955
  • Rimola, Albert|||0000-0002-9637-4554
There is a long-standing discussion in the astrophysical/astrochemical community as to the structure and morphology of dust grains in various astrophysical environments (e.g., interstellar clouds, protostellar envelopes, protoplanetary and debris disks, and the atmospheres of exoplanets). Typical grain models assume a compact dust core which becomes covered in a thick ice mantle in cold dense environments. In contrast, less compact cores are likely to exhibit porosity, leading to a pronounced increase in surface area with concomitant much thinner ice films and higher accessibility to the bare grain surface. Several laboratory experimental and theoretical studies have shown that this type of dust structure can have a marked effect on several physico-chemical processes, including adsorption, desorption, mobility, and reactivity of chemical species. Porous grains are thus thought to likely play a particularly important and wide-ranging astrochemical role. Herein, we clarify what is meant by porosity in relation to grains and grain agglomerates, assess the likely astrochemical effects of porosity and ask whether a fractal/porous structural/morphological description of dust grains is appropriate from an astronomical perspective. We provide evidence for high porosity from laboratory experiments and computational simulations of grains and their growth in various astrophysical environments, and assess the observational constraints and perspectives on cosmic dust porosity. Overall, our paper discusses the effects of including porosity in dust models and the need to use such models for future astrophysical, astrochemical and astrobiological studies involving surface or solid-state processes.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Single-atom iron on silicon carbide surfaces as catalyst of Fischer-Tropsch-type reactions in astrophysical environments

  • Pareras, Gerard|||0000-0002-8435-3297
  • Rimola, Albert|||0000-0002-9637-4554
Silicon carbide (SiC) is a major component of interstellar dust in carbon-rich environments, but its catalytic potential in space has remained largely unexplored. In this work, we investigate how single iron atoms supported on SiC (Fe0@SiC) can drive Fischer Tropsch-type (FTT) reactions, transforming the two most abundant gas-phase species in the interstellar medium (H2 and CO) into more complex organic compounds, i.e., formaldehyde (H2CO) and methanol (CH3OH). Using density functional theory (DFT), we model the catalytic cycle on the most stable β-SiC (110) surface, revealing that H2CO forms efficiently with relatively low activation barriers (up to 18.3 kcal mol-1), while, in contrast, CH3OH formation faces a significant energy barrier (32.6 kcal mol-1) in space. Atomistic mechanistic study highlights the role of Fe0@SiC in stabilizing reaction intermediates through Fe-H-Si bridging interactions, which facilitate H2 activation and CO hydrogenation. Kinetic analysis suggests that H2CO and CH3OH formation is viable in regions with temperatures above 200 and 350 K, respectively, aligning with observations of formaldehyde and methanol in protoplanetary disks and comets. The findings also suggest that FTT processes could contribute to the formation of other organic molecules, such as acetaldehyde and short-chain hydrocarbons, in space. This work offers new insights into how cosmic dust grains might drive the formation of complex molecules during the planetary system formation.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A Fully ab Initio Kinetic Monte Carlo Approach for Modeling Adsorption and Diffusion in Interstellar Icy Grain Mantles: The Case of H2S

  • Bariosco, Vittorio|||0009-0000-7269-8418
  • Pantaleone, Stefano|||0000-0002-2457-1065
  • Ceccarelli, Cecilia|||0000-0001-9664-6292
  • Rimola, Albert|||0000-0002-9637-4554
Understanding diffusion on interstellar ices is key to modeling the chemical evolution of cold molecular clouds, where low temperatures severely limit molecular mobility. In this study, we introduce a robust and fully automated multiscale computational framework to quantify diffusion processes of adsorbates at the surface of amorphous solid water (ASW). Using H2S as a test case, whose binding sites were previously studied at the ab initio level, we constructed a detailed network of 141 adsorption sites connected by over 270 transition states. All density functional energetics were benchmarked against DLPNO-CCSD(T), achieving chemical accuracy in the description of diffusion barriers, which span from 0.1 to 27 kJ mol-1 with a median value of 5.4 kJ mol-1. An off-lattice kinetic Monte Carlo (kMC) model adopting both the ab initio diffusion barriers and binding energies for the desorption processes was carried out to compute temperature-dependent diffusion coefficients and to reconstruct the temperature-programmed desorption (TPD) curve. Our simulations reveal that thermal diffusion of H2S is negligible below 20 K, with diffusion coefficients as low as 10-48 cm2 s-1 at 10 K, thus excluding Langmuir-Hinshelwood surface encounters under typical dense cloud conditions. Moreover, under submonolayer conditions, diffusion was found to have negligible influence on the reconstructed TPD peak position. Furthermore, our results demonstrate that a universal scaling factor f to guess the diffusion barriers (ΔEdiff) from the sole knowledge of BE: f = ΔEdiff/BE does not apply as it exhibits wide variability across the sampled configurations. These findings highlight the need for incorporating statistically meaningful distributions of binding energies and diffusion barriers in astrochemical models to more accurately capture diffusion and surface reactivity on interstellar ices.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Low-energy glycine formation and spectral masking in star-forming regions

  • Mates-Torres, Eric|||0000-0001-9002-7669
  • Rimola, Albert|||0000-0002-9637-4554
The presence of amino acids in comets and meteorites has long suggested that prebiotic molecules may have formed in space and contributed to the origins of life on Earth. Glycine, the simplest amino acid, has been identified in several extraterrestrial environments, although its detection in the interstellar medium, including prestellar cores and protostellar regions, remains elusive. Here, we investigate a novel catalytic pathway for glycine formation on silicate grains during relatively warm (> 150 K) stages of star formation. Using atomistic simulations, the feasibility of a Strecker-type synthesis and a direct neutral mechanism involving reactivity between formaldehyde, carbon monoxide and ammonia on forsterite surfaces, the major constituent of interstellar dust, is assessed. Results show that the Strecker pathway is limited by high activation barriers, whereas the proposed direct mechanism proceeds through low-energy surface-stabilized intermediates leading to spontaneous formation of glycine in a single-barrier exoergic process. Additionally, glycine strongly adsorbs onto the mineral surface and is unlikely to desorb under warm conditions. A vibrational analysis reveals that glycine formed through this pathway exhibits spectrally distinct features, including suppression and shifting of characteristic bands, which may account for its persistent non-detection in astronomical observations.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

The role of the pre-exponential factor on temperature programmed desorption spectra, A computational study of frozen species on interstellar icy grain mantles

  • Pantaleone, Stefano|||0000-0002-2457-1065
  • Tinacci, Lorenzo|||0000-0001-9909-9570
  • Bariosco, Vittorio|||0009-0000-7269-8418
  • Rimola, Albert|||0000-0002-9637-4554
  • Ceccarelli, Cecilia|||0000-0001-9664-6292
  • Ugliengo, Piero|||0000-0001-8886-9832
Temperature programmed desorption (TPD) is a well-known technique to study gas-surface processes, and it is characterized by two main quantities: the adsorbate binding energy and the pre-exponential factor. While the former has been well addressed in recent years by both experimental and computational methods, the latter remains somewhat ill-defined, and different schemes have been proposed in the literature for its evaluation. In the astrochemistry context, binding energies and pre-exponential factors are key parameters that enter microkinetic models for studying the evolution over time of the chemical species in the universe. In this paper, we studied, by computer simulations, the effect of different pre-exponential factor models using water, ammonia, and methanol adsorbed on amorphous and crystalline ices as test cases: specifically, the one most widely used by the astrochemical community (Herbst-Hasegawa), the models provided by Tait and Campbell, and an extension of the Tait formulation including the calculation of the vibrational partition function. We suggest the methods proposed by Tait and Campbell that provide TPD temperature peaks within 30 K of each other while avoiding demanding quantum mechanical calculations, as they are based on tabulated data. Finally, when the explicit inclusion of the vibrational partition function is needed, we propose a cost-effective strategy to include all the thermal contributions in the partition functions without the need for performing a full vibrational calculation of the whole system.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

The binding energy distribution of H2S, Why it is not the major sulphur reservoir of the interstellar ices

  • Bariosco, Vittorio|||0009-0000-7269-8418
  • Pantaleone, Stefano|||0000-0002-2457-1065
  • Ceccarelli, Cecilia|||0000-0001-9664-6292
  • Rimola, Albert|||0000-0002-9637-4554
  • Balucani, Nadia|||0000-0001-5121-5683
  • Corno, Marta|||0000-0001-7248-2705
  • Ugliengo, Piero|||0000-0001-8886-9832
Despite hydrogen sulphide (H2S) has been predicted to be the major reservoir of S-bearing species on the icy mantles of interstellar grains, no solid H2S has been detected so far. A crucial parameter that governs whether or not a species remains frozen on to the grain mantles is its binding energy (BE). We present a new computational study of the H2S BE on a large amorphous water ice surface, constituted by 200 water molecules. The resulting H2S BE distribution ranges from 57 K (0.5 kJ mol-1) to 2406 K (20.0 kJ mol-1), with the average μ = 984 K (8.2 kJ mol-1). We discuss the reasons why the low bound of the newly computed BE distribution, which testifies to the very weak interaction of H2S with the ice surface, has never been found by previous theoretical or experimental works before. In addition, the low H2S BEs may also explain why frozen H2S is not detected in interstellar ices. Following previous molecular dynamics studies that show that the energy of reactions occurring on ice surfaces is quickly absorbed by the water molecules of the ice and conservatively assuming that 10 per cent of the HS + H → H2S formation energy (-369.5 kJ mol-1) is left to the newly formed H2S, its energy is more than twice the largest BE and five times the average BE and, hence, H2S will most likely leave the water surface.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Confined Chemistry in Space, Zeolite-Supported Fe13 Nanoclusters Modulate CS Reactivity

  • Pareras, Gerard|||0000-0002-8435-3297
  • Rimola, Albert|||0000-0002-9637-4554
Zeolites are plausible nanoreactors in astrochemical environments, where their internal porosity and ability to host transition metals modulate surface reactivity under near-vacuum conditions. We investigate the confined chemistry of carbon monosulfide (CS) and hydrogen (H) on an Fe nanocluster embedded in chabazite (Fe@CHA) using density functional theory and microkinetic modeling. Motivated by the long-standing "missing sulfur" problem and the relevance of thioformaldehyde (HCS), we use CS + H as a test reaction. On Fe@CHA, H dissociates and CS adsorption strongly polarizes the C-S bond; confinement tilts the competition between pathways so that C-S bond scission dominates over H addition toward HCS. The resulting C and S adatoms are trapped and funnel reactivity toward HS and CH via sequential hydrogenation. Calculations on an open Fe@SiO surface show that, in the absence of confinement, CS hydrogenation to HCS is preferred, confirming that the shift in chemoselectivity is a genuine confinement effect. Insertion of a second CS molecule (without H) enables the formation of CS, CS, and C species, with barriers that favor C-C over S-S coupling. Kinetic analysis indicates that these processes become efficient at mid-to-high temperatures, identifying inner protoplanetary regions as promising environments where zeolitic grains sequester sulfur and reshape CS-based chemistry.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Accurate 3D fireball trajectory and orbit calculation using the 3D-firetoc automatic Python code

  • Peña-Asensio, Eloy
  • Trigo-Rodríguez, Josep María
  • Gritsevich, Maria
  • Rimola, Albert
The disruption of asteroids and comets produces cm-sized meteoroids that end up impacting the Earth's atmosphere and producing bright fireballs that might have associated shock waves or, in geometrically favourable occasions excavate craters that put them into unexpected hazardous scenarios. The astrometric reduction of meteors and fireballs to infer their atmospheric trajectories and heliocentric orbits involves a complex and tedious process that generally requires many manual tasks. To streamline the process, we present a software package called SPMN 3D Fireball Trajectory and Orbit Calculator (3D-firetoc), an automatic Python code for detection, trajectory reconstruction of meteors, and heliocentric orbit computation from video recordings. The automatic 3D-firetoc package comprises of a user interface and a graphic engine that generates a realistic 3D representation model, which allows users to easily check the geometric consistency of the results and facilitates scientific content production for dissemination. The software automatically detects meteors from digital systems, completes the astrometric measurements, performs photometry, computes the meteor atmospheric trajectory, calculates the velocity curve, and obtains the radiant and the heliocentric orbit, all in all quantifying the error measurements in each step. The software applies corrections such as light aberration, refraction, zenith attraction, diurnal aberration, and atmospheric extinction. It also characterizes the atmospheric flight and consequently determines fireball fates by using the α - β criterion that analyses the ability of a fireball to penetrate deep into the atmosphere and produce meteorites. We demonstrate the performance of the software by analysing two bright fireballs recorded by the Spanish Fireball and Meteorite Network (SPMN)., JMT-R, EPA, and AR acknowledge financial support from the Spanish Ministry (PGC2018-097374-B-I00 funded by MCI-AEI-FEDER, PI: JMT-R; CTQ2017-89132-P, PI: AR). MG acknowledges support from the Academy of Finland project no. 325806, and the Russian Foundation for Basic Research, project nos. 18-08-00074 and 19-05-00028. AR is indebted to the ‘Ramón y Cajal’ program and DIUE (project 2017SGR1323). This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement No. 865657) for the project ‘Quantum Chemistry on Interstellar Grains’ (QUANTUMGRAIN).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Study of Fischer-Tropsch-type reactions on chondritic meteorites

  • Cabedo, Victoria
  • Llorca, J.
  • Trigo-Rodríguez, Josep María
  • Rimola, Albert
[Context] How simple organic matter appeared on Earth and the processes by which it transformed into more evolved organic compounds, which ultimately led to the emergence of life, is still an open topic. Different scenarios have been proposed, the main one assumes that simple organic compounds were synthesized, either in the gas phase or on the surfaces of dust grains, during the process of star formation and they were incorporated into larger bodies in the protoplanetary disk. The transformation of these simple organic compounds in more complex forms is still a matter of debate. Recent discoveries have pointed to catalytic properties of dust grains present in the early stellar envelope, which can nowadays be found in the form of chondrites. The significant infall of chondritic meteorites during the early periods of Earth suggests that the same reactions could have taken place in certain environments on the Earth's surface, with conditions more favorable for organic synthesis. [Aims] This work attempts to synthesize simple organic molecules, such as hydrocarbons and alcohols via Fischer-Tropsch-type reactions supported by different chondritic materials under early-Earth conditions, to investigate if organic synthesis can likely occur in this environment and to determine what the differences are in selectivity when using different types of chondrites. [Methods] Fischer-Tropsch-type reactions are investigated from mixtures of CO and H2 at 1 atm of pressure on the surfaces of different chondritic samples. The different products obtained are analyzed in situ by gas chromatography. [Results] Different Fischer-Tropsch reaction products are obtained in quantitative amounts. The formation of alkanes and alkenes being the main processes. The formation of alcohols also takes place in a smaller amount. Other secondary products were obtained in a qualitative way. [Conclusions] Chondritic material surfaces have been proven as good supports for the occurrence of organic synthesis. Under certain circumstances during the formation of Earth, they could have produced a suitable environment for these reactions to occur., J.M.T.-R. acknowledges financial support from research project PGC2018-097374-B-I00, funded by FEDER/Ministerio de Ciencia e Innovación – Agencia Estatal de Investigación. J.L. is grateful to ICREA Academia program and funding from Generalitat de Catalunya (2017 SGR 128). A.R. is indebted to the “Ramón y Cajal” program, MINECO project CTQ2017-89132-P, DIUE project 2017SGR1323, and funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement no. 865657) for the project “Quantum Chemistry on Interstellar Grains” (QUANTUMGRAIN).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Using fireball networks to track more frequent reentries: Falcon 9 upper-stage orbit determination from video recordings

  • Peña-Asensio, Eloy
  • Trigo-Rodríguez, Josep María
  • Langbroek, Marco
  • Rimola, Albert
  • Robles, Antonio
On February 16, 2021, an artificial object moving slowly over the Mediterranean was recorded by the Spanish Meteor Network (SPMN). Based on astrometric measurements, we identified this event as the reentry engine burn of a SpaceX Falcon 9 launch vehicle’s upper stage. To study this event in detail, we adapted the plane intersection method for near-straight meteoroid trajectories to analyze the slow and curved orbits associated with artificial objects. To corroborate our results, we approximated the orbital elements of the upper stage using four pieces of “debris” cataloged by the U.S. Government’s Combined Space Operations Center. Based on these calculations, we also estimated the possible deorbit hazard zone using the MSISE90 model atmosphere. We provide guidance regarding the interference that these artificial bolides may generate in fireball studies. Additionally, because artificial bolides will likely become more frequent in the future, we point out the new role that ground-based detection networks can play in the monitoring of potentially hazardous artificial objects in near-Earth space and in determining the strewn fields of artificial space debris. [Figure not available: see fulltext.], This research was supported by the research project (Grant No. PGC2018-097374-B-I00, PI: JMT-R), which is funded by FEDER/Ministerio de Ciencia e Innovación–Agencia Estatal de Investigación. This project has also received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Programme (Grant No. 865657) for the project “Quantum Chemistry on Interstellar Grains” (QUANTUMGRAIN).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

From impact refugees to deterritorialized states: Foresighting extreme legal-policy cases in asteroid impact scenarios

  • Simó-Soler, E.
  • Peña-Asensio, Eloy
Throughout recorded history, humans have crossed national borders to seek safety in nearby countries. The reasons for displacement have been generated by phenomena of terrestrial origin, but exposure to unexpected extra-terrestrial threats poses a different scenario. An asteroid impact warning implies a change of paradigm which would represent a historic precedent. In this regard, the analogies with natural disasters must be considered, along with multiple possible scenarios, and legal aspects related to (a) the legal framework to regulate this situation; (b) the action and responsibility of the states; and (c) the definition of impact refugee and the reconfiguration of traditional concepts such as deterritorialized states. In addition, the decision-making process and the actors involved must be led by a cooperative effort to improve international law. These new circumstances should be established with a consideration of inequalities between the states, and an aim of protecting humanity through democratic solutions using the safest, most effective techniques., ESS acknowledges financial support from the Spanish Ministry of Science, Innovation and Universities (FPU 17/04436). EPA acknowledges support from the FEDER/Ministerio de Ciencia e Innovación – Agencia Estatal de Investigación (PGC2018-097374-B-I00, PI: JMT-R). This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement No. 865657) for the project “Quantum Chemistry on Interstellar Grains” (QUANTUMGRAIN).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Identifying meteorite droppers among the population of bright ‘sporadic’ bolides imaged by the Spanish Meteor Network during the spring of 2022

  • Peña-Asensio, Eloy
  • Trigo-Rodríguez, Josep María
  • Rimola, Albert
  • Corretgé-Gilart, M.
  • Koschny, Detlef
The extraordinary weather conditions available between February and March 2022 over Spain have allowed us to analyse the brightest fireballs recorded by the monitoring stations of the Spanish Meteor Network (SPMN). We study the atmospheric flight of 15 large meteoroids to determine if they are meteorite dropper events to prepare campaigns to search for freshly fallen extraterrestrial material. We investigate their origins in the Solar system and their dynamic association with parent bodies and meteoroid streams. Employing our PYTHON pipeline 3D-FIRETOC, we reconstruct the atmospheric trajectory utilizing ground-based multistation observations and compute the heliocentric orbit. In addition, we apply an ablation model to estimate the initial and terminal mass of each event. Using a dissimilarity criterion and propagating backward in time, we check the connection of these meteoroids with known complexes and near-Earth objects. We also calculate if the orbits are compatible with recent meteoroid ejections. We find that ∼27 per cent of these fireballs are dynamically associated with minor meteoroid streams and exhibit physical properties of cometary bodies, as well as one associated with a near-Earth asteroid. We identify two meteorite-producing events; however, the on-site search was unsuccessful. By considering that these fireballs are mostly produced by cm-sized rocks that might be the fragmentation product of much larger meteoroids, our findings emphasize the idea that the population of near-Earth objects is a source of near-term impact hazards, existing large Earth-colliding meteoroids in the known complexes., This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement no. 865657) for the project ‘Quantum Chemistry on Interstellar Grains’ (QUANTUMGRAIN). JMT-R and EP-A acknowledge financial support from project PID2021-128062NB-I00 funded by MCIN/AEI/10.13039/501100011033. AR acknowledges financial support from the FEDER/Ministerio de Ciencia e Innovación - Agencia Estatal de Investigación (PID2021-126427NB-I00, PI: AR). AR is indebted to DIUE (project 2017SGR1323)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Deep machine learning for meteor monitoring: Advances with transfer learning and gradient-weighted class activation mapping

  • Peña-Asensio, Eloy
  • Trigo-Rodríguez, Josep María
  • Grèbol-Tomàs, Pau
  • Regordosa-Avellana, David
  • Rimola, Albert
In recent decades, the use of optical detection systems for meteor studies has increased dramatically, resulting in huge amounts of data being analyzed. Automated meteor detection tools are essential for studying the continuous meteoroid incoming flux, recovering fresh meteorites, and achieving a better understanding of our Solar System. Concerning meteor detection, distinguishing false positives between meteor and non-meteor images has traditionally been performed by hand, which is significantly time-consuming. To address this issue, we developed a fully automated pipeline that uses Convolutional Neural Networks (CNNs) to classify candidate meteor detections. Our new method is able to detect meteors even in images that contain static elements such as clouds, the Moon, and buildings. To accurately locate the meteor within each frame, we employ the Gradient-weighted Class Activation Mapping (Grad-CAM) technique. This method facilitates the identification of the region of interest by multiplying the activations from the last convolutional layer with the average of the gradients across the feature map of that layer. By combining these findings with the activation map derived from the first convolutional layer, we effectively pinpoint the most probable pixel location of the meteor. We trained and evaluated our model on a large dataset collected by the Spanish Meteor Network (SPMN) and achieved a precision of 98%. Our new methodology presented here has the potential to reduce the workload of meteor scientists and station operators and improve the accuracy of meteor tracking and classification., This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement No. 865657) for the project ‘‘Quantum Chemistry on Interstellar Grains’’ (QUANTUMGRAIN). JMTR, EP-A, and PG-T acknowledge financial support from the project PID2021-128062NB-I00 funded by MCIN/AEI/10.13039/5011000 11033. AR acknowledges financial support from the FEDER/Ministerio de Ciencia e Innovación – Agencia Estatal de Investigación (PID2021-126427NB-I00, PI: AR). This work was also partially supported by the program Unidad de Excelencia María de Maeztu CEX2020-001058-M., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2020-001058-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Automated astronaut traverses with minimum metabolic workload: Accessing permanently shadowed regions near the lunar south pole

  • Peña-Asensio, Eloy
  • Sutherland, Jennifer
  • Tripathi, Prateek
  • Mason, Kashauna
  • Goodwin, Arthur
  • Bickel, Valentin T.
  • Kring, David A.
The Artemis exploration zone is a topographically complex impact-cratered terrain. Steep undulating slopes pose a challenge for walking extravehicular activities (EVAs) anticipated for the Artemis III and subsequent missions. Using 5 m/pixel Lunar Orbiter Laser Altimeter (LOLA) measurements of the surface, an automated Python pipeline was developed to calculate traverse paths that minimize metabolic workload. The tool combines a Monte Carlo method with a minimum-cost path algorithm that assesses cumulative slope over distances between a lander and stations, as well as between stations. To illustrate the functionality of the tool, optimized paths to permanently shadowed regions (PSRs) are calculated around potential landing sites 001, nearby location 001(6), and 004, all within the Artemis III ‘Connecting Ridge’ candidate landing region. We identified 521 PSRs and computed (1) traverse paths to accessible PSRs within 2 km of the landing sites, and (2) optimized descents from host crater rims into each PSR. Slopes are limited to 15° and previously identified boulders are avoided. Surface temperature, astronaut body illumination, regolith bearing capacity, and astronaut-to-lander direct view are simultaneously evaluated. Travel times are estimated using Apollo 12 and 14 walking EVA data. A total of 20 and 19 PSRs are accessible from sites 001 and 001(6), respectively, four of which maintain slopes <10°. Site 004 provides access to 11 PSRs, albeit with higher EVA workloads. From the crater rims, 94 % of PSRs can be accessed. All round-trip traverses from potential landing sites can be performed in under 2 h with a constant walk. Traverses and descents to PSRs are compiled in an atlas to support Artemis mission planning., E. P. A. thanks funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (grant agreement No. 865657). J. S. is supported by funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 847439. We thank the LRO team for their efforts to acquire the data used in this study, as well as the staff at the Lunar and Planetary Institute for their support during an Exploration Science internship through the Center for Lunar Science and Exploration, where this research was conducted. We are also grateful to Bo Wu for generating the 1 m/pixel DEM and Sarah Boazman for sharing the boulder locations. This work was supported by NASA Solar System Exploration Research Virtual Institute (80NSSC20M0016, PI D.A.K.). LPI Contribution No. 3009. LPI is operated by the Universities Space Research Association., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Deciding technosignature search strategies: Multi-criteria fuzzy logic to find extraterrestrial intelligence

  • Sánchez-Lozano, Juan Miguel
  • Peña-Asensio, Eloy
  • Socas-Navarro, Hector
This article belongs to the Section Astronautics & Space Science., This study presents the implementation of Multi-Criteria Decision-Making (MCDM) methodologies, particularly the fuzzy technique for order of preference by similarity to ideal solution (TOPSIS), in prioritizing technosignatures (TSs) for the search for extraterrestrial intelligence (SETI). By incorporating expert opinions and weighted criteria based on the established Axes of Merit, our analysis offers insights into the relative importance of various TSs. Notably, radio and optical communications are emphasized, in contrast to dark side illumination and starshades in transit. We introduce a new axis, Scale Sensitivity, designed to assess the variability of TS metrics. A sensitivity analysis confirms the robustness of our approach. Our findings, especially the highlighted significance of artifacts orbiting Earth, the Moon, or the Sun, indicate a need to broaden evaluative criteria within SETI research. This suggests an enhancement of the Axes of Merit, with a focus on addressing the plausibility of TSs. As the quest to resolve the profound question of our solitude in the cosmos continues, SETI efforts would benefit from exploring innovative prioritization methodologies that effectively quantify TS search strategies., The APC was funded by the project Fundación Séneca (grant number: 22069/PI/22), Spain. J.M.S.-L. and E.P.-A. have carried out this work in the framework of the project Fundación Séneca (grant number: 22069/PI/22), Spain. J.M.S.-L. thanks funding from the Ministerio de Ciencia e Innovación (Spain) (grant numbers: PID2020-112754GB-I00 and PID2021-128062NB-I00). E.P.-A. thanks funding from the European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Programme (grant agreement No. 865657) for the project “Quantum Chemistry on Interstellar Grains” (QUANTUMGRAIN). E.P.-A. also recognizes partial support from the program Unidad de Excelencia María de Maeztu CEX2020-001058-M. H.S.-N. acknowledges support from the Agencia Estatal de Investigación del Ministerio de Ciencia e Innovación (AEI-MCINN) under grant Hydrated Minerals and Organic Compounds in Primitive Asteroids with reference PID2020-120464GB-I100., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2020-001058-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Oort cloud perturbations as a source of hyperbolic Earth impactors

  • Peña-Asensio, Eloy
  • Visuri, Jaakko
  • Trigo-Rodríguez, Josep María
  • Socas-Navarro, Hector
  • Gritsevich, Maria
  • Siljama, Markku
  • Rimola, Albert
The observation of interstellar objects 1I/’Oumuamua and 2I/Borisov suggests the existence of a larger population of smaller projectiles that impact our planet with unbound orbits. We analyze an asteroidal grazing meteor (FH1) recorded by the Finnish Fireball Network on October 23, 2022. FH1 displayed a likely hyperbolic orbit lying on the ecliptic plane with an estimated velocity excess of ∼0.7 km s−1 at impact. FH1 may either be an interstellar object, indicating a high-strength bias in this population, or an Oort cloud object, which would reinforce migration-based solar system models. Furthermore, under the calculated uncertainties, FH1 could potentially be associated with the passage of Scholz’s binary star system. Statistical evaluation of uncertainties in the CNEOS database and study of its hyperbolic fireballs reveals an anisotropic geocentric radiant distribution and low orbital inclinations, challenging the assumption of a randomly incoming interstellar population. Orbital integrations suggest that the event on March 9, 2017 (IM2) from CNEOS may have experienced gravitational perturbation during the Scholz fly-by, contingent upon velocity overestimation within the expected range. These findings suggest that apparent interstellar meteors may, in fact, be the result of accelerated meteoroid impacts caused by close encounters with massive objects within or passing through our solar system., This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement No. 865657) for the project “Quantum Chemistry on Interstellar Grains” (QUANTUMGRAIN). JMT-R and EP-A. acknowledge financial support from the project PID2021-128062NB-I00 funded by MCIN/AEI /10.13039/501100011033, as well as the Unidad de Excelencia María de Maeztu CEX2020-001058-M. AR acknowledges financial support from the FEDER/Ministerio de Ciencia e Innovación – Agencia Estatal de Investigación (PID2021-126427NB-I00, PI: AR). MG acknowledges the Academy of Finland project no. 325806 (PlanetS). HS-N acknowledges support from the Agencia Estatal de Investigación del Ministerio de Ciencia e Innovación (AEI-MCINN) under grant Hydrated Minerals and Organic Compounds in Primitive Asteroids with reference PID2020-120464GB-I100., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2020-001058-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanical properties of minerals in lunar and HED meteorites from nanoindentation testing: Implications for space mining

  • Peña-Asensio, Eloy
  • Trigo-Rodríguez, Josep María
  • Sort, Jordi
  • Ibáñez Insa, Jordi
  • Rimola, Albert
This study analyzes the mechanical and elemental properties of lunar meteorites DHOFAR 1084, JAH 838, NWA 11444, and HED meteorite NWA 6013. Utilizing microscale rock mechanics experiments, that is, nanoindentation testing, this research reveals significant heterogeneity in both mechanical and elemental attributes across the mineral samples. Olivines, pyroxene, feldspar, and spinel demonstrate similar compositional and mechanical characteristics. Conversely, other silicate and oxide minerals display variations in their mechanical properties. Terrestrial olivines subjected to nanoindentation tests exhibit increased hardness and a higher Young's modulus than their lunar counterparts. A linear correlation is observed between the H/Er ratio and both plastic and elastic energies. Additionally, the alignment of mineral phases along a constant H/Er ratio suggests variations in local porosity. This study also highlights the need for further research focusing on porosity, phase insertions within the matrix, and structural orientations to refine our understanding of these mechanical characteristics. The findings have direct implications for in situ resource utilization strategies and future state-of-the-art impact models. This comprehensive characterization serves as a foundational resource for future research efforts in space science and mining., JMT-R and EP-A acknowledge financial support from the project PID2021-128062NB-I00 funded by MCIN/AEI/10.13039/501100011033. The lunar samples studied here were acquired in the framework of grant PGC2018-097374-B-I00 (P.I. JMT-R). This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (grant agreement no. 865657) for the project “Quantum Chemistry on Interstellar Grains” (QUANTUMGRAIN). AR acknowledges financial support from the FEDER/Ministerio de Ciencia e Innovación—Agencia Estatal de Investigación (PID2021-126427NB-I00, PI: AR). Partial financial support from the Spanish Government (PID2020-116844RB-C21) and the Generalitat de Catalunya (2021-SGR-00651) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Theoretical modelling of the adsorption of neutral and charged sulphur-bearing species on to olivine nanoclusters

  • Perrero, Jessica
  • Beitia-Antero, Leire
  • Fuente, Asunción
  • Ugliengo, Piero
  • Rimola, Albert
Sulphur depletion in the interstellar medium (ISM) is a long-standing issue, as only 1 per cent of its cosmic abundance is detected in dense molecular clouds (MCs), while it does not appear to be depleted in other environments. In addition to gas phase species, MCs also contain interstellar dust grains, which are irregular, micron-sized, solid aggregates of carbonaceous materials, and/or silicates. Grains provide a surface where species can meet, accrete, and react. Although freeze-out of sulphur on to dust grains could explain its depletion, only OCS and, tentatively, SO2 were observed on their surfaces. Therefore, it is our aim to investigate the interaction between sulphur-containing species and the exposed mineral core of the grains at a stage prior to when sulphur depletion is observed. Here, the grain core is represented by olivine nanoclusters, one of the most abundant minerals in the ISM, with composition Mg4Si2O8 and Mg3FeSi2O8. We performed a series of quantum mechanical calculations to characterize the adsorption of nine S-bearing species, both neutral and charged, on to the nanoclusters. Our calculations reveal that the Fe–S interaction is preferred to Mg–S, causing sometimes the chemisorption of the adsorbate. These species are more strongly adsorbed on the bare dust grain silicate cores than on water ice mantles, and hence therefore likely sticking on the surface of grains forming part of the grain core. This demonstrates that the interaction of bare grains with sulphur species in cloud envelopes can determine the S-depletion observed in dense molecular clouds., This project has received funding within the European Union’s Horizon 2020 research and innovation programme from the European Research Council (ERC) for the projects ‘Quantum Chemistry on Interstellar Grains’ (QUANTUMGRAIN), grant agreement number 865657 and ‘The trail of sulphur: from molecular clouds to life’ (SUL4LIFE), grant agreement number 101096293, and from the Marie Sklodowska-Curie for the project ‘Astro-Chemical Origins’ (ACO), grant agreement number 811312. The Italian Space Agency for co-funding the Life in Space Project (ASI N. 2019-3-U.O), the Italian MUR (PRIN 2020, Astrochemistry beyond the second period elements, Prot. 2020AFB3FX) are also acknowledged for financial support. JP acknowledges support from the Project CH4.0 under the MUR programme ‘Dipartimenti di Eccellenza 2023–2027’ (CUP: D13C22003520001). The Spanish MICINN is also acknowledged for funding the projects PID2021-126427NB-I00 (AR), PID2019-106235GB-I00 (AF), and PID2020-116726RB-I00 (LB-A)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Delivery of DART impact ejecta to Mars and Earth: Opportunity for meteor observations

  • Peña-Asensio, Eloy
  • Küppers, Michael
  • Trigo-Rodríguez, Josep María
  • Rimola, Albert
NASA's Double Asteroid Redirection Test (DART) and ESA's Hera missions offer a unique opportunity to investigate the delivery of impact ejecta to other celestial bodies. We performed ejecta dynamical simulations using 3 million particles categorized into three size populations (10 cm, 0.5 cm, and 30 μm) and constrained by early postimpact LICIACube observations. The main simulation explored ejecta velocities ranging from 1 to 1000 m s−1, while a secondary simulation focused on faster ejecta with velocities from 1 to 2 km s−1. We identified DART ejecta orbits compatible with the delivery of meteor-producing particles to Mars and Earth. Our results indicate the possibility of ejecta reaching the Mars Hill sphere in 13 yr for launch velocities around 450 m s−1, which is within the observed range. Some ejecta particles launched at 770 m s−1 could reach Mars's vicinity in 7 yr. Faster ejecta resulted in a higher flux delivery toward Mars and particles impacting the Earth Hill sphere above 1.5 km s−1. The delivery process is slightly sensitive to the initial observed cone range and driven by synodic periods. The launch locations for material delivery to Mars were predominantly north of the DART impact site, while they displayed a southwestern tendency for the Earth–Moon system. Larger particles exhibit a marginally greater likelihood of reaching Mars, while smaller particles favor delivery to Earth–Moon, although this effect is insignificant. To support observational campaigns for DART-created meteors, we provide comprehensive information on the encounter characteristics (orbital elements and radiants) and quantify the orbital decoherence degree of the released meteoroids., E.P.-A. acknowledges support from ESA through the Faculty of the European Space Astronomy Centre (ESAC)—Funding reference 149. E.P.-A. is also thankful for financial support by the LUMIO project funded by the Agenzia Spaziale Italiana (2024-6-HH.0). This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (grant agreement No. 865657) for the project "Quantum Chemistry on Interstellar Grains" (QUANTUMGRAIN). J.M.T.-R. and E.P.-A. acknowledge financial support from the project PID2021-128062NB-I00 funded by MCIN/AEI/10.13039/501100011033. A.R. acknowledges financial support from the FEDER/Ministerio de Ciencia e Innovación—Agencia Estatal de Investigación (PID2021-126427NB-I00; PI: A.R.)., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Computational Surface Modelling of Ices and Minerals of Interstellar Interest-Insights and Perspectives

  • Rimola, Albert|||0000-0002-9637-4554
  • Ferrero, Stefano|||0000-0001-7819-7657
  • Germain, Aurèle|||0000-0001-7856-0516
  • Corno, Marta|||0000-0001-7248-2705
  • Ugliengo, Piero|||0000-0001-8886-9832
The universe is molecularly rich, comprising from the simplest molecule (H2) to complex organic molecules (e.g., CH3CHO and NH2CHO), some of which of biological relevance (e.g., amino acids). This chemical richness is intimately linked to the different physical phases forming Solar-like planetary systems, in which at each phase, molecules of increasing complexity form. Interestingly, synthesis of some of these compounds only takes place in the presence of interstellar (IS) grains, i.e., solid-state sub-micron sized particles consisting of naked dust of silicates or carbonaceous materials that can be covered by water-dominated ice mantles. Surfaces of IS grains exhibit particular characteristics that allow the occurrence of pivotal chemical reactions, such as the presence of binding/catalytic sites and the capability to dissipate energy excesses through the grain phonons. The present know-how on the physicochemical features of IS grains has been obtained by the fruitful synergy of astronomical observational with astrochemical modelling and laboratory experiments. However, current limitations of these disciplines prevent us from having a full understanding of the IS grain surface chemistry as they cannot provide fundamental atomic-scale of grain surface elementary steps (i.e., adsorption, diffusion, reaction and desorption). This essential information can be obtained by means of simulations based on computational chemistry methods. One capability of these simulations deals with the construction of atom-based structural models mimicking the surfaces of IS grains, the very first step to investigate on the grain surface chemistry. This perspective aims to present the current state-of-the-art methods, techniques and strategies available in computational chemistry to model (i.e., construct and simulate) surfaces present in IS grains. Although we focus on water ice mantles and olivinic silicates as IS test case materials to exemplify the modelling procedures, a final discussion on the applicability of these approaches to simulate surfaces of other cosmic grain materials (e.g., cometary and meteoritic) is given.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ab-initio computational study on Fe2NiP schreibersite, bulk and surface characterization

  • Pantaleone, Stefano|||0000-0002-2457-1065
  • Corno, Marta|||0000-0001-7248-2705
  • Rimola, Albert|||0000-0002-9637-4554
  • Balucani, Nadia|||0000-0001-5121-5683
  • Ugliengo, Piero|||0000-0001-8886-9832
Phosphorus is ubiquitous in planet Earth and plays a fundamental role in all living systems. Finding a reasonable prebiotic source of phosphorus is not trivial, as common sources where it is present nowadays are in the form of phosphate minerals, which are rather insoluble and nonreactive materials, making it unavailable for ready incorporation in living organisms. A possible source of phosphorus is from exogenous meteoritic bombardment and, in particular, iron/nickel phosphides. These materials, by simple interaction with water, produce oxygenated phosphorus compounds, which can easily react with organic molecules, thus forming C-O-P bonds. In the present work, periodic ab initio simulations at the PBE level (inclusive of dispersion interactions) have been carried out on metallic Fe2NiP schreibersite, as a relatively abundant component of metallic meteorites, in order to characterize the structural, energetic, and vibrational properties of both bulk and surfaces of this material. The aim is to study the relative stability among different surfaces and also to characterize the nanocrystal morphology of the mineral.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Accurate 3D fireball trajectory and orbit calculation using the 3D-FIRETOC automatic Python code

  • Peña-Asensio, Eloy|||0000-0002-7257-2150
  • Trigo-Rodríguez, J.M.|||0000-0001-8417-702X
  • Gritsevich, Maria|||0000-0003-4268-6277
  • Rimola, Albert|||0000-0002-9637-4554
The disruption of asteroids and comets produces cm-sized meteoroids that end up impacting the Earth's atmosphere and producing bright fireballs that might have associated shock waves or, in geometrically favourable occasions excavate craters that put them into unexpected hazardous scenarios. The astrometric reduction of meteors and fireballs to infer their atmospheric trajectories and heliocentric orbits involves a complex and tedious process that generally requires many manual tasks. To streamline the process, we present a software package called SPMN 3D Fireball Trajectory and Orbit Calculator (3D-FIRETOC), an automatic Python code for detection, trajectory reconstruction of meteors, and heliocentric orbit computation from video recordings. The automatic 3D-FIRETOC package comprises of a user interface and a graphic engine that generates a realistic 3D representation model, which allows users to easily check the geometric consistency of the results and facilitates scientific content production for dissemination. The software automatically detects meteors from digital systems, completes the astrometric measurements, performs photometry, computes the meteor atmospheric trajectory, calculates the velocity curve, and obtains the radiant and the heliocentric orbit, all in all quantifying the error measurements in each step. The software applies corrections such as light aberration, refraction, zenith attraction, diurnal aberration, and atmospheric extinction. It also characterizes the atmospheric flight and consequently determines fireball fates by using the α - β criterion that analyses the ability of a fireball to penetrate deep into the atmosphere and produce meteorites. We demonstrate the performance of the software by analysing two bright fireballs recorded by the Spanish Fireball and Meteorite Network (SPMN).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Study of Fischer-Tropsch-type reactions on chondritic meteorites

  • Cabedo Soto, Victoria|||0000-0002-6944-9207
  • Llorca, Jordi|||0000-0002-7447-9582
  • Trigo-Rodríguez, J.M.|||0000-0001-8417-702X
  • Rimola, Albert|||0000-0002-9637-4554
Context. How simple organic matter appeared on Earth and the processes by which it transformed into more evolved organic compounds, which ultimately led to the emergence of life, is still an open topic. Different scenarios have been proposed, the main one assumes that simple organic compounds were synthesized, either in the gas phase or on the surfaces of dust grains, during the process of star formation and they were incorporated into larger bodies in the protoplanetary disk. The transformation of these simple organic compounds in more complex forms is still a matter of debate. Recent discoveries have pointed to catalytic properties of dust grains present in the early stellar envelope, which can nowadays be found in the form of chondrites. The significant infall of chondritic meteorites during the early periods of Earth suggests that the same reactions could have taken place in certain environments on the Earth's surface, with conditions more favorable for organic synthesis. Aims. This work attempts to synthesize simple organic molecules, such as hydrocarbons and alcohols via Fischer-Tropsch-type reactions supported by different chondritic materials under early-Earth conditions, to investigate if organic synthesis can likely occur in this environment and to determine what the differences are in selectivity when using different types of chondrites. Methods. Fischer-Tropsch-type reactions are investigated from mixtures of CO and H2 at 1 atm of pressure on the surfaces of different chondritic samples. The different products obtained are analyzed in situ by gas chromatography. Results. Different Fischer-Tropsch reaction products are obtained in quantitative amounts. The formation of alkanes and alkenes being the main processes. The formation of alcohols also takes place in a smaller amount. Other secondary products were obtained in a qualitative way. Conclusions. Chondritic material surfaces have been proven as good supports for the occurrence of organic synthesis. Under certain circumstances during the formation of Earth, they could have produced a suitable environment for these reactions to occur.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Interaction of HCO+ cations with interstellar negative frains. Quantum chemical investigation and astrophysical implications

  • Rimola, Albert|||0000-0002-9637-4554
  • Ceccarelli, Cecilia|||0000-0001-9664-6292
  • Balucani, Nadia|||0000-0001-5121-5683
  • Ugliengo, Piero|||0000-0001-8886-9832
In cold galactic molecular clouds, dust grains are coated by icy mantles and are prevalently charged negatively, because of the capture of the electrons in the gas. The interaction of the charged grains with gaseous cations is known to neutralize them. In this work, we focus on the chemical consequences of the neutralization process of HCO+, often the most abundant cation in molecular clouds. More specifically, by means of electronic structure calculations, we have characterized the energy and the structure of all possible product species once the HCO+ ion adsorbs on water clusters holding an extra electron. Two processes are possible: (i) electron transfer from the negative water cluster to the HCO+ ion or (ii) a proton transfer from HCO+ to the negative water cluster. Energetic considerations favor electron transfer. Assuming this scenario, two limiting cases have been considered in astrochemical models: (a) all the neutralized HCO+ is retained as neutral HCO adsorbed on the ice and (b) all the neutralized HCO+ gets desorbed to the gas phase as HCO. None of the two limiting cases appreciably contribute to the HCO abundance on the grain surfaces or in the gas.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Formation of interstellar silicate dust via nanocluster aggregation, Insights from quantum chemistry simulations

  • Rimola, Albert|||0000-0002-9637-4554
  • Bromley, Stefan|||0000-0002-7037-0475
The issue of formation of dust grains in the interstellar medium is still a matter of debate. One of the most developed proposals suggests that atomic and heteromolecular seeds bind together to initiate a nucleation process leading to the formation of nanostructures resembling very small grain components. In the case of silicates, nucleated systems can result in molecular nanoclusters with diameters ≤ 2 nm. A reasonable path to further increase the size of these proto-silicate nanoclusters is by mutual aggregation. The present work deals with modeling this proto-silicate nanocluster aggregation process by means of quantum chemical density functional theory calculations. We simulate nanocluster aggregation by progressively reducing the size of a periodic array of initially well-separated nanoclusters. The resulting aggregation leads to a set of silicate bulk structures with gradually increasing density which we analyze with respect to structure, energetics and spectroscopic properties. Our results indicate that aggregation is a highly energetically favorable process, in which the infrared spectra of the finally formed amorphous silicates match well with astronomical observations.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Does processing or formation of water ice mantles affect the capacity of nanosilicates to be the source of anomalous microwave emission?

  • Mariñoso Guiu, Joan
  • Ferrero, Stefano|||0000-0001-7819-7657
  • Macià Escatllar, Antonio
  • Rimola, Albert|||0000-0002-9637-4554
  • Bromley, Stefan|||0000-0002-7037-0475
Anomalous microwave emission (AME) is detected in many astrophysical environments as a foreground feature typically peaking between 20-30 GHz and extending over a 10-60 GHz range. One of the leading candidates for the source of AME is small spinning dust grains. Such grains should be very small (approx. ≤1 nm diameter) in order for the rotational emission to fall within the observed frequency range. In addition, these nanosized grains should possess a significant dipole moment to account for the observed emissivities. These constraints have been shown to be compatible with spinning bare nanosilicate clusters, assuming that ∼1% of the total Si mass budget is held in these ultrasmall grains. Silicate dust can be hydroxylated by processing in the interstellar medium and is generally known to provide seeds for molecular water ice nucleation in denser regions. Herein, we use quantum chemical calculations to investigate how the dipole moment of Mg-rich pyroxenic (MgSiO3) nanoclusters is affected by both accretion of molecular water and dissociative hydration. Our work thus provides an indication of how the formation of water ice mantles is likely to affect the capacity of nanosilicates to generate AME.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Theoretical computations on the efficiency of acetaldehyde formation on interstellar icy grains

  • Enrique-Romero, Joan|||0000-0002-2147-7735
  • Ceccarelli, Cecilia|||0000-0001-9664-6292
  • Rimola, Albert|||0000-0002-9637-4554
  • Skouteris, Dimitrios
  • Balucani, Nadia|||0000-0001-5121-5683
  • Ugliengo, Piero|||0000-0001-8886-9832
Context: Interstellar grains are known to be important actors in the formation of interstellar molecules such as H2, water, ammonia, and methanol. It has been suggested that the so-called interstellar complex organic molecules (iCOMs) are also formed on the interstellar grain icy surfaces by the combination of radicals via reactions assumed to have an efficiency equal to unity. Aims: In this work, we aim to investigate the robustness or weakness of this assumption. In particular, we consider the case of acetaldehyde (CH3CHO), one of the most abundant and commonly identified iCOMs, as a starting study case. In the literature, it has been postulated that acetaldehyde is formed on the icy surfaces via the combination of HCO and CH3. Here we report new theoretical computations on the efficiency of its formation. Methods: To this end, we coupled quantum chemical calculations of the energetics and kinetics of the reaction CH3 + HCO, which can lead to the formation of CH3CHO or CO + CH4. Specifically, we combined reaction kinetics computed with the Rice-Ramsperger-Kassel-Marcus theory (tunneling included) method with diffusion and desorption competitive channels. We provide the results of our computations in the format used by astrochemical models to facilitate their exploitation. Results: Our new computations indicate that the efficiency of acetaldehyde formation on the icy surfaces is a complex function of the temperature and, more importantly, of the assumed diffusion over binding energy ratio f of the CH3 radical. If the ratio f is ≥0.4, the efficiency is equal to unity in the range where the reaction can occur, namely between 12 and 30 K. However, if f is smaller, the efficiency dramatically crashes: with f = 0.3, it is at most 0.01. In addition, the formation of acetaldehyde is always in competition with that of CO + CH4. Conclusions: Given the poor understanding of the diffusion over binding energy ratio f and the dramatic effect it has on the formation, or not, of acetaldehyde via the combination of HCO and CH3 on icy surfaces, model predictions based on the formation efficiency equal to one should to be taken with precaution. The latest measurements of f suggest f = 0.3 and, if confirmed for CH3, this would rule out the formation of acetaldehyde on the interstellar icy surfaces. We recall the alternative possibility, which was recently reviewed, that acetaldehyde could be synthesized in the gas phase starting from ethanol. Finally, our computations show the paramount importance played by the micro-physics involved in the interstellar surface chemistry and call for extensive similar studies on different systems believed to form iCOMs on the interstellar icy surfaces.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Water interaction with Fe2NiP Schreibersite (110) surface, a quantum mechanical atomistic perspective

  • Pantaleone, Stefano|||0000-0002-2457-1065
  • Corno, Marta|||0000-0001-7248-2705
  • Rimola, Albert|||0000-0002-9637-4554
  • Balucani, Nadia|||0000-0001-5121-5683
  • Ugliengo, Piero|||0000-0001-8886-9832
Phosphorus is an element of primary importance for all living creatures, being present in many biological activities in the form of phosphate (PO43-). However, there are still open questions about the origin of this specific element and on the transformation that allowed it to be incorporated in biological systems. The most probable source of prebiotic phosphorus is the intense meteoritic bombardment during the Archean era, a few million years after the solar system formation, which brought tons of iron-phosphide materials (schreibersite) on the early Earth crust. It was recently demonstrated that by simple wetting/corrosion processes from this material, various oxygenated phosphorus compounds are produced. In the present work, the wetting process of schreibersite (Fe2NiP) was studied by computer simulations using density functional theory, with the PBE functional supplemented with dispersive interactions through a posteriori empirical correction. To start disentangling the complexity of the system, only the most stable (110) surface of Fe2NiP was used simulating different water coverages, from which structures, water binding energies, and vibrational spectra have been predicted. The computed (ana-)harmonic infrared spectra have been compared with the experimental ones, thus, confirming the validity of the adopted methodology and models.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Tracing the Primordial Chemical Life of Glycine, a Review from Quantum Chemical Simulations

  • Rimola, Albert|||0000-0002-9637-4554
  • Balucani, Nadia|||0000-0001-5121-5683
  • Ceccarelli, Cecilia|||0000-0001-9664-6292
  • Ugliengo, Piero|||0000-0001-8886-9832
Glycine (Gly), NHCHCOOH, is the simplest amino acid. Although it has not been directly detected in the interstellar gas-phase medium, it has been identified in comets and meteorites, and its synthesis in these environments has been simulated in terrestrial laboratory experiments. Likewise, condensation of Gly to form peptides in scenarios resembling those present in a primordial Earth has been demonstrated experimentally. Thus, Gly is a paradigmatic system for biomolecular building blocks to investigate how they can be synthesized in astrophysical environments, transported and delivered by fragments of asteroids (meteorites, once they land on Earth) and comets (interplanetary dust particles that land on Earth) to the primitive Earth, and there react to form biopolymers as a step towards the emergence of life. Quantum chemical investigations addressing these Gly-related events have been performed, providing fundamental atomic-scale information and quantitative energetic data. However, they are spread in the literature and difficult to harmonize in a consistent way due to different computational chemistry methodologies and model systems. This review aims to collect the work done so far to characterize, at a quantum mechanical level, the chemical life of Gly, i.e., from its synthesis in the interstellar medium up to its polymerization on Earth.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Non-energetic Formation of Ethanol via CCH Reaction with Interstellar H2O Ices. A Computational Chemistry Study

  • Perrero, Jessica|||0000-0003-2161-9120
  • Enrique-Romero, Joan|||0000-0002-2147-7735
  • Martínez-Bachs, Berta|||0000-0002-1290-7019
  • Ceccarelli, Cecilia|||0000-0001-9664-6292
  • Balucani, Nadia|||0000-0001-5121-5683
  • Ugliengo, Piero|||0000-0001-8886-9832
  • Rimola, Albert|||0000-0002-9637-4554
Ethanol (CHCHOH) is a relatively common molecule, often found in star-forming regions. Recent studies suggest that it could be a parent molecule of several so-called interstellar complex organic molecules (iCOMs). However, the formation route of this species remains under debate. In the present work, we study the formation of ethanol through the reaction of CCH with one HO molecule belonging to the ice as a test case to investigate the viability of chemical reactions based on a "radical + ice component" scheme as an alternative mechanism for the synthesis of iCOMs, beyond the usual radical-radical coupling. This has been done by means of DFT calculations adopting two clusters of 18 and 33 water molecules as ice models. Results indicate that CHCHOH can potentially be formed by this proposed reaction mechanism. The reaction of CCH with HO on the water ice clusters can be barrierless (because of the help of boundary icy water molecules acting as proton-transfer assistants), leading to the formation of vinyl alcohol precursors (HCCOH and CHCHOH). Subsequent hydrogenation of vinyl alcohol yielding ethanol is the only step presenting a low activation energy barrier. We finally discuss the astrophysical implications of these findings.
Dipòsit Digital de Documents de la UAB
Publicación Capítulo o parte de un libro (BookPart)

Ab initio Calculation of Binding Energies of Interstellar Sulphur-Containing Species on Crystalline Water Ice Models

  • Perrero, Jessica|||0000-0003-2161-9120
  • Rimola, Albert|||0000-0002-9637-4554
  • Corno, Marta|||0000-0001-7248-2705
  • Ugliengo, Piero|||0000-0001-8886-9832
There are different environments in the interstellar medium (ISM), depending on the density, temperature and chemical composition. Among them, molecular clouds, often referred to as the cradle of stars, are paradigmatic environments relative to the chemical diversity and complexity in space. Indeed, there, radio to far-infrared observations revealed the presence of several molecules in the gas phase, while near-infrared spectroscopy detected the existence of submicron sized dust grains covered by H2O-dominated ice mantles. The interaction between gas-phase species and the surfaces of water ices is measured by the binding energy (BE), a crucial parameter in astrochemical modelling. In this work, the BEs of a set of sulphur-containing species on water ice mantles have been computed by adopting a periodic ab initio approach using a crystalline surface model. The Density Functional Theory (DFT)-based B3LYP-D3(BJ) functional was used for the prediction of the structures and energetics. DFT BEs were refined by adopting an ONIOM-like procedure to estimate them at CCSD(T) level toward complete basis set extrapolation, in which a very good correlation between values has been found. Moreover, we show that geometry optimization with the computationally cheaper HF-3c method followed by single point energy calculations at DFT to compute the BEs is a suitable cost-effective recipe to arrive at BE values of the same quality as those computed at full DFT level. Finally, computed data were compared with the available literature data.
Dipòsit Digital de Documents de la UAB
Publicación Capítulo o parte de un libro (BookPart)

Computational Investigation on the Thermodynamics of H2CO + NH2 → NH2CHO + H on Interstellar Water Ice Surfaces

  • Martínez-Bachs, Berta|||0000-0002-1290-7019
  • Rimola, Albert|||0000-0002-9637-4554
Formamide has a key role in prebiotic chemistry as it is the simplest molecule containing the four most important atoms from a biological point of view: hydrogen, carbon, nitrogen and oxygen. Due to its importance, the formation of this molecule has been studied and different pathways have been considered both in gas-phase and on ices of dust grains since it was first detected. In the present work, the thermodynamics of the formation route of formamide starting from NH2 and H2CO, a reaction channel proposed to occur in the gas phase, has been theoretically investigated in the scenario taking place on icy dust grains modelled by both a cluster and a periodic approach. Different DFT functionals have been employed to obtain accurate energy values for the mechanistic steps involved in the reaction.
Dipòsit Digital de Documents de la UAB
Publicación Capítulo o parte de un libro (BookPart)

An Ab Initio Computational Study of Binding Energies of Interstellar Complex Organic Molecules on Crystalline Water Ice Surface Models

  • Kakkar, Harjasnoor|||0000-0002-8984-2356
  • Martínez-Bachs, Berta|||0000-0002-1290-7019
  • Rimola, Albert|||0000-0002-9637-4554
The interstellar medium is extremely heterogeneous in terms of physical environments and chemical composition. Spectroscopic observations in the recent decades have revealed the presence of gaseous material and dust grains covered in ices predominantly of water in interstellar clouds, the interplay of which may elucidate the existence of more than 250 molecular species. Of these species of varied complexity, several terrestrial carbon-containing compounds have been discovered, known as interstellar complex organic molecules (iCOMs) in the astrochemical argot. In order to investigate the formation of iCOMs, it is crucial to explore gas-grain chemistry and in this regard, one of the fundamental parameters is the binding energy (BE), which is an essential input in astrochemical models. In this work, the BEs of 13 iCOMs on a crystalline H2O-ice surface have been computed by means of quantum chemical periodic calculations. The hybrid B3LYP-D3 DFT method was used for the geometry optimizations of the adsorbate/ice systems and for computing the BEs. Furthermore, to refine the BE values, an ONIOM2-like approximation has been employed to obtain them at CCSD(T), which correlate well with those obtained at B3LYP-D3. Additionally, aiming to lower the computational cost, structural optimizations were carried out using the HF-3c level of theory, followed by single point energy calculations at B3LYP-D3 in order to obtain BE values comparable to the full DFT treatment.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Where does the energy go during the interstellar NH3 formation on water ice? a computational study

  • Ferrero, Stefano|||0000-0001-7819-7657
  • Pantaleone, Stefano|||0000-0002-2457-1065
  • Ceccarelli, Cecilia|||0000-0001-9664-6292
  • Ugliengo, Piero|||0000-0001-8886-9832
  • Sodupe, Mariona|||0000-0003-0276-0524
  • Rimola, Albert|||0000-0002-9637-4554
In the coldest (10-20 K) regions of the interstellar medium, the icy surfaces of interstellar grains serve as solid-state supports for chemical reactions. Among their plausible roles, that of third body is advocated, in which the reaction energies of surface reactions dissipate throughout the grain, stabilizing the product. This energy dissipation process is poorly understood at the atomic scale, although it can have a high impact on astrochemistry. Here we study, by means of quantum mechanical simulations, the formation of NH3 via successive H-additions to atomic N on water ice surfaces, paying special attention to the third-body role. We first characterize the hydrogenation reactions and the possible competitive processes (i.e., H-abstractions), in which the H-additions are more favorable than the H-abstractions. Subsequently, we study the fate of the hydrogenation reaction energies by means of ab initio molecular dynamics simulations. Results show that around 58%-90% of the released energy is quickly absorbed by the ice surface, inducing a temporary increase of the ice temperature. Different energy dissipation mechanisms are distinguished. One mechanism, more general, is based on the coupling of the highly excited vibrational modes of the newly formed species and the libration modes of the icy water molecules. A second mechanism, exclusive during the NH3 formation, is based on the formation of a transient H3O+/NH2- ion pair, which significantly accelerates the energy transfer to the surface. Finally, the astrophysical implications of our findings relative to the interstellar synthesis of NH3 and its chemical desorption into the gas are discussed.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Acetaldehyde binding energies, a coupled experimental and theoretical study

  • Ferrero, Stefano|||0000-0001-7819-7657
  • Grieco, F.
  • Ibrahim Mohamed, A-S.
  • Dulieu, François|||0000-0001-6981-0421
  • Rimola, Albert|||0000-0002-9637-4554
  • Ceccarelli, Cecilia|||0000-0001-9664-6292
  • Nervi, C.
  • Minissale, M.
  • Ugliengo, Piero|||0000-0001-8886-9832
Acetaldehyde is one of the most common and abundant gaseous interstellar complex organic molecules found in cold and hot regions of the molecular interstellar medium. Its presence in the gas-phase depends on the chemical formation and destruction routes, and its binding energy (BE) governs whether acetaldehyde remains frozen on to the interstellar dust grains or not. In this work, we report a combined study of the acetaldehyde BE obtained via laboratory temperature programmed desorption (TPD) experiments and theoretical quantum chemical computations. BEs have been measured and computed as a pure acetaldehyde ice and mixed with both polycrystalline and amorphous water ice. Both calculations and experiments found a BE distribution on amorphous solid water that covers the 4000-6000 K range when a pre-exponential factor of 1.1×1018s-1 is used for the interpretation of the experiments. We discuss in detail the importance of using a consistent couple of BE and pre-exponential factor values when comparing experiments and computations, as well as when introducing them in astrochemical models. Based on the comparison of the acetaldehyde BEs measured and computed in the present work with those of other species, we predict that acetaldehyde is less volatile than formaldehyde, but much more than water, methanol, ethanol, and formamide. We discuss the astrochemical implications of our findings and how recent astronomical high spatial resolution observations show a chemical differentiation involving acetaldehyde, which can easily explained due to the different BEs of the observed molecules.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Binding energies of interstellar relevant S-bearing species on water ice mantles, a quantum mechanical investigation

  • Perrero, Jessica|||0000-0003-2161-9120
  • Enrique-Romero, Joan|||0000-0002-2147-7735
  • Ferrero, Stefano|||0000-0001-7819-7657
  • Ceccarelli, Cecilia|||0000-0001-9664-6292
  • Podio, Linda|||0000-0003-2733-5372
  • Codella, Claudio|||0000-0003-1514-3074
  • Rimola, Albert|||0000-0002-9637-4554
  • Ugliengo, Piero|||0000-0001-8886-9832
Binding energies (BEs) are one of the most important parameters for astrochemical modeling determining, because they govern whether a species stays in the gas phase or is frozen on the grain surfaces. It is currently known that, in the denser and colder regions of the interstellar medium, sulfur is severely depleted in the gas phase. It has been suggested that it may be locked into the grain icy mantles. However, which are the main sulfur carriers is still a matter of debate. This work aims to establish accurate BEs of 17 sulfur-containing species on two validated water ice structural models, the proton-ordered crystalline (010) surface and an amorphous water ice surface. We adopted density functional theory-based methods (the hybrid B3LYP-D3(BJ) and the hybrid meta-GGA M06-2X functionals) to predict structures and energetics of the adsorption complexes. London's dispersion interactions are shown to be crucial for an accurate estimate of the BEs due to the presence of the high polarizable sulfur element. On the crystalline model, the adsorption is restricted to a very limited number of binding sites with single valued BEs, while on the amorphous model, several adsorption structures are predicted, giving a BE distribution for each species. With the exception of a few cases, both experimental and other computational data are in agreement with our calculated BE values. A final discussion on how useful the computed BEs are with respect to the snow lines of the same species in protoplanetary disks is provided.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Formation of Complex Organic Molecules on Interstellar CO Ices? Insights from Computational Chemistry Simulations

  • Ferrero, Stefano|||0000-0001-7819-7657
  • Ceccarelli, Cecilia|||0000-0001-9664-6292
  • Ugliengo, Piero|||0000-0001-8886-9832
  • Sodupe, Mariona|||0000-0003-0276-0524
  • Rimola, Albert|||0000-0002-9637-4554
The carbon (3P) atom is a reactive species that, according to laboratory experiments and theoretical calculations, condensates with interstellar ice components. This fact is of uttermost importance for the chemistry in the interstellar medium (ISM) because the condensation reaction is barrierless, and the subsequent species formed are still reactive given their open-shell character. Carbon condensation on CO-rich ices forms the C=C=O (3Σ-) species, which can be easily hydrogenated twice to form ketene (H2CCO). Ketene is very reactive in terrestrial conditions, usually found as an intermediate that is difficult to isolate in chemical synthesis laboratories. These characteristics suggest that ketene can be a good candidate to form interstellar complex organic molecules via a two-step process, i.e., its activation followed by a radical-radical coupling. In this work, reactions between ketene and atomic H and the OH and NH2 radicals on a CO-rich ice model have been explored by means of quantum chemical calculations complemented by kinetic calculations to evaluate if they are favorable in the ISM. Results indicate that the addition of H to ketene (helped by tunneling) to form the acetyl radical (CH3CO) is the most preferred path as the reactions with OH and NH2 possess activation energies ( 9 kJ mol-1 ) hard to surmount in the ISM conditions unless external processes provide energy to the system. Thus, acetaldehyde (CH3CHO) and, probably, ethanol (CH3CH2OH) formation via further hydrogenations, are the possible unique operating synthetic routes. Moreover, from the computed, relatively large binding energies of OH and NH2 on CO ice, slow diffusion is expected, hampering possible radical-radical couplings with CH3CO. The astrophysical implications of these findings are discussed considering the incoming James Webb Space Telescope observations.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Automated astronaut traverses with minimum metabolic workload, Accessing permanently shadowed regions near the lunar south pole

  • Peña-Asensio, Eloy|||0000-0002-7257-2150
  • Sutherland, Jennifer
  • Tripathi, Prateek|||0000-0001-8261-5719
  • Mason, Kashauna
  • Goodwin, Arthur|||0000-0003-2839-629X
  • Bickel, Valentin Tertius|||0000-0002-7914-2516
  • Kring, David A.
The Artemis exploration zone is a topographically complex impact-cratered terrain. Steep undulating slopes pose a challenge for walking extravehicular activities (EVAs) anticipated for the Artemis III and subsequent missions. Using 5 m/pixel Lunar Orbiter Laser Altimeter (LOLA) measurements of the surface, an automated Python pipeline was developed to calculate traverse paths that minimize metabolic workload. The tool combines a Monte Carlo method with a minimum-cost path algorithm that assesses cumulative slope over distances between a lander and stations, as well as between stations. To illustrate the functionality of the tool, optimized paths to permanently shadowed regions (PSRs) are calculated around potential landing sites 001, nearby location 001(6), and 004, all within the Artemis III 'Connecting Ridge' candidate landing region. We identified 521 PSRs and computed (1) traverse paths to accessible PSRs within 2 km of the landing sites, and (2) optimized descents from host crater rims into each PSR. Slopes are limited to 15° and previously identified boulders are avoided. Surface temperature, astronaut body illumination, regolith bearing capacity, and astronaut-to-lander direct view are simultaneously evaluated. Travel times are estimated using Apollo 12 and 14 walking EVA data. A total of 20 and 19 PSRs are accessible from sites 001 and 001(6), respectively, four of which maintain slopes <10°. Site 004 provides access to 11 PSRs, albeit with higher EVA workloads. From the crater rims, 94 % of PSRs can be accessed. All round-trip traverses from potential landing sites can be performed in under 2 h with a constant walk. Traverses and descents to PSRs are compiled in an atlas to support Artemis mission planning.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Oort cloud perturbations as a source of hyperbolic Earth impactors

  • Peña-Asensio, Eloy|||0000-0002-7257-2150
  • Visuri, Jaakko
  • Trigo-Rodríguez, J.M.|||0000-0001-8417-702X
  • Socas-Navarro, Hector|||0000-0001-9896-4622
  • Gritsevich, Maria|||0000-0003-4268-6277
  • Siljama, Markku
  • Rimola, Albert|||0000-0002-9637-4554
The observation of interstellar objects 1I/'Oumuamua and 2I/Borisov suggests the existence of a larger population of smaller projectiles that impact our planet with unbound orbits. We analyze an asteroidal grazing meteor (FH1) recorded by the Finnish Fireball Network on October 23, 2022. FH1 displayed a likely hyperbolic orbit lying on the ecliptic plane with an estimated velocity excess of ∼0.7 km s at impact. FH1 may either be an interstellar object, indicating a high-strength bias in this population, or an Oort cloud object, which would reinforce migration-based solar system models. Furthermore, under the calculated uncertainties, FH1 could potentially be associated with the passage of Scholz's binary star system. Statistical evaluation of uncertainties in the CNEOS database and study of its hyperbolic fireballs reveals an anisotropic geocentric radiant distribution and low orbital inclinations, challenging the assumption of a randomly incoming interstellar population. Orbital integrations suggest that the event on March 9, 2017 (IM2) from CNEOS may have experienced gravitational perturbation during the Scholz fly-by, contingent upon velocity overestimation within the expected range. These findings suggest that apparent interstellar meteors may, in fact, be the result of accelerated meteoroid impacts caused by close encounters with massive objects within or passing through our solar system.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Deep machine learning for meteor monitoring, Advances with transfer learning and gradient-weighted class activation mapping

  • Peña-Asensio, Eloy|||0000-0002-7257-2150
  • Trigo-Rodríguez, J.M.|||0000-0001-8417-702X
  • Grèbol-Tomàs, Pau
  • Regordosa-Avellana, David
  • Rimola, Albert|||0000-0002-9637-4554
In recent decades, the use of optical detection systems for meteor studies has increased dramatically, resulting in huge amounts of data being analyzed. Automated meteor detection tools are essential for studying the continuous meteoroid incoming flux, recovering fresh meteorites, and achieving a better understanding of our Solar System. Concerning meteor detection, distinguishing false positives between meteor and non-meteor images has traditionally been performed by hand, which is significantly time-consuming. To address this issue, we developed a fully automated pipeline that uses Convolutional Neural Networks (CNNs) to classify candidate meteor detections. Our new method is able to detect meteors even in images that contain static elements such as clouds, the Moon, and buildings. To accurately locate the meteor within each frame, we employ the Gradient-weighted Class Activation Mapping (Grad-CAM) technique. This method facilitates the identification of the region of interest by multiplying the activations from the last convolutional layer with the average of the gradients across the feature map of that layer. By combining these findings with the activation map derived from the first convolutional layer, we effectively pinpoint the most probable pixel location of the meteor. We trained and evaluated our model on a large dataset collected by the Spanish Meteor Network (SPMN) and achieved a precision of 98%. Our new methodology presented here has the potential to reduce the workload of meteor scientists and station operators and improve the accuracy of meteor tracking and classification.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Gas-Phase vs. Grain-Surface Formation of Interstellar Complex Organic Molecules, A Comprehensive Quantum-Chemical Study

  • Martínez-Bachs, Berta|||0000-0002-1290-7019
  • Rimola, Albert|||0000-0002-9637-4554
Several organic chemical compounds (the so-called interstellar complex organic molecules, iCOMs) have been identified in the interstellar medium (ISM). Examples of iCOMs are formamide (HCONH), acetaldehyde (CHCHO), methyl formate (CHOCHO), or formic acid (HCOOH). iCOMs can serve as precursors of other organic molecules of enhanced complexity, and hence they are key species in chemical evolution in the ISM. The formation of iCOMs is still a subject of a vivid debate, in which gas-phase or grain-surface syntheses have been postulated. In this study, we investigate the grain-surface-formation pathways for the four above-mentioned iCOMs by transferring their primary gas-phase synthetic routes onto water ice surfaces. Our objective is twofold: (i) to identify potential grain-surface-reaction mechanisms leading to the formation of these iCOMs, and (ii) to decipher either parallelisms or disparities between the gas-phase and the grain-surface reactions. Results obtained indicate that the presence of the icy surface modifies the energetic features of the reactions compared to the gas-phase scenario, by increasing some of the energy barriers. Therefore, the investigated gas-phase mechanisms seem unlikely to occur on the icy grains, highlighting the distinctiveness between the gas-phase and the grain-surface chemistry.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Synthesis of urea on the surface of interstellar water ice clusters. A quantum chemical study

  • Perrero, Jessica|||0000-0003-2161-9120
  • Rimola, Albert|||0000-0002-9637-4554
Urea is a prebiotic molecule that has been detected in few sources of the interstellar medium (ISM) and in Murchison meteorite. Being stable against ultraviolet radiation and high-energy electron bombardment, urea is expected to be present in interstellar ices. Theoretical and experimental studies suggest that isocyanic acid (HNCO) and formamide (NHCHO) are possible precursors of urea. However, uncertainties still exist regarding its formation routes. Previous computational works characterised urea formation in the gas phase or in presence of few water molecules by reaction of formamide with nitrogen-bearing species. In this work, we investigated the reaction of HNCO + NH on an 18 water molecules ice cluster model mimicking interstellar ice mantles by means of quantum chemical computations. We characterised different mechanisms involving both closed-shell and open-shell species at B3LYP-D3(BJ)/ma-def2-TZVP level of theory, in which the radical-radical HNCO + NH coupling has been found to be the most favourable one due to being almost barrierless. In this path, the presence of the icy surfaces is crucial for acting as reactant concentrators/suppliers, as well as third bodies able to dissipate the energy liberated during the urea formation.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Deciding Technosignature Search Strategies, Multi-Criteria Fuzzy Logic to Find Extraterrestrial Intelligence

  • Sánchez-Lozano, Juan Miguel|||0000-0002-4615-8001
  • Peña-Asensio, Eloy|||0000-0002-7257-2150
  • Socas-Navarro, Hector|||0000-0001-9896-4622
This study presents the implementation of Multi-Criteria Decision-Making (MCDM) methodologies, particularly the fuzzy technique for order of preference by similarity to ideal solution (TOPSIS), in prioritizing technosignatures (TSs) for the search for extraterrestrial intelligence (SETI). By incorporating expert opinions and weighted criteria based on the established Axes of Merit, our analysis offers insights into the relative importance of various TSs. Notably, radio and optical communications are emphasized, in contrast to dark side illumination and starshades in transit. We introduce a new axis, Scale Sensitivity, designed to assess the variability of TS metrics. A sensitivity analysis confirms the robustness of our approach. Our findings, especially the highlighted significance of artifacts orbiting Earth, the Moon, or the Sun, indicate a need to broaden evaluative criteria within SETI research. This suggests an enhancement of the Axes of Merit, with a focus on addressing the plausibility of TSs. As the quest to resolve the profound question of our solitude in the cosmos continues, SETI efforts would benefit from exploring innovative prioritization methodologies that effectively quantify TS search strategies.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Unlocking the surface chemistry of ionic minerals, a high-throughput pipeline for modeling realistic interfaces

  • Mates-Torres, Eric|||0000-0001-9002-7669
  • Rimola, Albert|||0000-0002-9637-4554
A systematic procedure is introduced for modeling charge-neutral non-polar surfaces of ionic minerals containing polyatomic anions. By integrating distance- and charge-based clustering to identify chemical species within the mineral bulk, our pipeline, PolyCleaver, renders a variety of theoretically viable surface terminations. As a demonstrative example, this approach was applied to forsterite (Mg2SiO4), unveiling a rich interface landscape based on interactions with formaldehyde, a relevant multifaceted molecule, and more particularly in prebiotic chemistry. This high-throughput method, going beyond techniques traditionally applied in the modeling of minerals, offers new insights into the potential catalytic properties of diverse surfaces, enabling a broader exploration of synthetic pathways in complex mineral systems.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Mechanical properties of minerals in lunar and HED meteorites from nanoindentation testing, implications for space mining

  • Peña-Asensio, Eloy|||0000-0002-7257-2150
  • Trigo-Rodríguez, J.M.|||0000-0001-8417-702X
  • Sort, Jordi|||0000-0003-1213-3639
  • Ibañez-Insa, Jordi|||0000-0002-8909-6541
  • Rimola, Albert|||0000-0002-9637-4554
This study analyzes the mechanical and elemental properties of lunar meteorites DHOFAR 1084, JAH 838, NWA 11444, and HED meteorite NWA 6013. Utilizing microscale rock mechanics experiments, that is, nanoindentation testing, this research reveals significant heterogeneity in both mechanical and elemental attributes across the mineral samples. Olivines, pyroxene, feldspar, and spinel demonstrate similar compositional and mechanical characteristics. Conversely, other silicate and oxide minerals display variations in their mechanical properties. Terrestrial olivines subjected to nanoindentation tests exhibit increased hardness and a higher Young's modulus than their lunar counterparts. A linear correlation is observed between the H/E ratio and both plastic and elastic energies. Additionally, the alignment of mineral phases along a constant H/E ratio suggests variations in local porosity. This study also highlights the need for further research focusing on porosity, phase insertions within the matrix, and structural orientations to refine our understanding of these mechanical characteristics. The findings have direct implications for in situ resource utilization strategies and future state-of-the-art impact models. This comprehensive characterization serves as a foundational resource for future research efforts in space science and mining.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Formation of Methanol via Fischer-Tropsch Catalysis by Cosmic Iron Sulphide

  • Martínez-Bachs, Berta|||0000-0002-1290-7019
  • Anguera González, Alexia
  • Pareras, Gerard|||0000-0002-8435-3297
  • Rimola, Albert|||0000-0002-9637-4554
Chemical reactions in the gas phase of the interstellar medium face significant challenges due to its extreme conditions (i. e., low gas densities and temperatures), necessitating the presence of dust grains to facilitate the synthesis of molecules inaccessible in the gas phase. While interstellar grains are known to enhance encounter rates and dissipate energy from exothermic reactions, their potential as chemical catalysts remain less explored. Here, we present mechanistic insights into the Fischer-Tropsch-type methanol (FTT-CHOH) synthesis by reactivity of CO with H and using cosmic FeS surfaces as heterogeneous catalysts. Periodic quantum chemical calculations were employed to characterize the potential energy surface of the reactions on the (011) and (001) FeS surfaces, considering different Fe coordination environments and S vacancies. Kinetic calculations were also conducted to assess catalytic capacity and allocate reaction processes within the astrochemical framework. Our findings demonstrate the feasibility of FeS-based astrocatalysis in the FTT-CHOH synthesis. The reactions and their energetics were elucidated from a mechanistic standpoint. Kinetic analysis demonstrates the temperature dependency of the simulated processes, underscoring the compulsory need of energy sources considering the astrophysical scenario. Our results provide insights into the presence of CHOH in diverse regions where current models struggle to explain its observational quantity.