Pasar al contenido principal

MODELIZACION COMPUTACIONAL DE NANOPARTICULAS. APLICACIONES EN CATALISIS, EVOLUCION QUIMICA Y BIOIMAGEN

CTQ2017-89132-P

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD AUTONOMA DE BARCELONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 38
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Activating a peroxo ligand for C−O bond formation

  • Río, M. Pilar del
  • Abril, Paula
  • López, José A.
  • Sodupe, Mariona
  • Lledós, Agustí
  • Ciriano, Miguel A.
  • Tejel, Cristina
Dioxygen activation for effective C−O bond formation in the coordination sphere of a metal is a long‐standing challenge in chemistry for which the design of catalysts for oxygenations is slowed down by the complicated, and sometimes poorly understood, mechanistic panorama. In this context, olefin–peroxide complexes could be valuable models for the study of such reactions. Herein, we showcase the isolation of rare “Ir(cod)(peroxide)” complexes (cod=1,5‐cyclooctadiene) from reactions with oxygen, and then the activation of the peroxide ligand for O−O bond cleavage and C−O bond formation by transfer of a hydrogen atom through proton transfer/electron transfer reactions to give 2‐iradaoxetane complexes and water. 2,4,6‐Trimethylphenol, 1,4‐hydroquinone, and 1,4‐cyclohexadiene were used as hydrogen atom donors. These reactions can be key steps in the oxy‐functionalization of olefins with oxygen, and they constitute a novel mechanistic pathway for iridium, whose full reaction profile is supported by DFT calculations., Generous financial support from MINECO/FEDER (Projects CTQ2014‐53033‐P and CTQ2017‐83421‐P to C.T.; CTQ2017‐87889‐P to A.L.; and CTQ2017‐89132‐P to M.S.) and Gobierno de Aragón (GA/FEDER, Inorganic Molecular Architecture Group E08_17R to C.T.) is gratefully acknowledged. M.P.d.R. and P.A. thank MINECO/FEDER for a JdC contract and a FPI fellowship, respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Silicate-mediated interstellar water formation: a theoretical study

  • Molpeceres, Germán
  • Rimola, Albert
  • Ceccarelli, C.
  • Kästner, Johannes
  • Ugliengo, Piero
  • Maté, Belén
12 pags. 6 figs., 2 tabs., Water is one of the most abundant molecules in the form of solid ice phase in the different regions of the interstellar medium (ISM). This large abundance cannot be properly explained by using only traditional low-temperature gas-phase reactions. Thus, surface chemical reactions are believed to be major synthetic channels for the formation of interstellar water ice. Among the different proposals, hydrogenation of atomic O (i.e. 2H + O ¿ H2O) is a chemically `simple¿ and plausible reaction toward water formation occurring on the surfaces of interstellar grains. Here, novel theoretical results concerning the formation of water adopting this mechanism on the crystalline (010) Mg2SiO4 surface (a unequivocally identified interstellar silicate) are presented. The investigated reaction aims to simulate the formation of the first water ice layer covering the silicate core of dust grains. Adsorption of the atomic O as a first step of the reaction has been computed, results indicating that a peroxo (O2¿2¿) group is formed. The following steps involve the adsorption, diffusion, and reaction of two successive H atoms with the adsorbed O atom. Results indicate that H diffusion on the surface has barriers of 4¿6 kcal mol¿1, while actual formation of OH and H2O present energy barriers of 22¿23 kcal mol¿1. Kinetic study results show that tunneling is crucial for the occurrence of the reactions and that formation of OH and H2O are the bottlenecks of the overall process. Several astrophysical implications derived from the theoretical results are provided as concluding remarks., GM is grateful to MINECO (Ministerio de Economıa y Competitividad) by the EEBB-I-17-12096 short stay grant. AR is indebted to ‘Ramon y Cajal’ program. This work was supported by: MINECO ´ (CTQ2017-89132-P, FIS2013-48087-C2-1P and FIS2016-C3-1P); AGAUR (Agencia de Gestio d’Ajuts Universitaris i de Recerca, ´ Goumans, project 2017SGR1320) ; ERC-2016-AdG DOC (Dawn of Organic Chemistry), grant agreement No 741002; ERC-2013- SyG NANOCOSMOS, grant agreement No 610256; ERC-2014- CoG TUNNELCHEM, grant agreement 646717; MIUR (Ministero dell’Istruzione, dell’Universita e della Ricerca) and Scuola Nor- ` male Superiore (project PRIN 2015, STARS in the CAOS - Simulation Tools for Astrochemical Reactivity and Spectroscopy in the Cyberinfrastructure for Astrochemical Organic Species, cod. 2015F59J3R). The use of CESGA is gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Switching acidic and basic catalysis through supramolecular functionalization in a porous 3D covalent imine-based material

  • Luis-Barrera, Javier
  • Cano, Rafael
  • Imani-Shakibaei, Ghazaleh
  • Heras-Domingo, Javier
  • Pérez-Carvajal, Javier
  • Imaz, Inhar
  • Maspoch, Daniel
  • Solans-Monfort, Xavier
  • Alemán, José
  • Mas-Ballesté, Rubén
Non-covalent inclusion of small acid and base molecules (CH3COOH and NEt3) in an imine structure based on micrometre COF-300 crystals and amorphous nanoparticles results in the facile modulation of their acid–base properties. Such a strategy results in the triggering of acidic/basic catalytic activity of the otherwise inactive materials towards ring-opening epoxide and Knoevenagel condensation reactions. For both reactions, amorphous nanoparticles are better catalysts than micrometre crystals as they exhibit a higher external surface area. The found activities and stability of this supramolecular functionalization are modulated by confinement effects, which are rationalized with the help of DFT calculations. All results obtained suggest that the reactions catalysed by these functionalized materials occur confined to pores closer to the material surface, which makes size-discrimination phenomena possible, and explains the major activity of the nanoparticulated material., This work was supported by the Spanish Ministerio de Economia y Competitividad (MINECO) (CTQ2017-89132-P; RTI2018-095038-B-I00) and “Comunidad de Madrid” and European Structural Funds (S2018/NMT-4367). It was also supported by the Generalitat de Catalunya (SGR XSM is grateful for the Professor Agregat Serra Húnter position). R. C. thanks CAM for the “Atracción de Talento” fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced metallophilicity in metal–carbene systems: Stronger character of aurophilic interactions in solution

  • Vellé, Alba
  • Rodríguez-Santiago, Luis
  • Sodupe, Mariona
  • Sanz Miguel, Pablo J.
Metallophilicity is an essential concept that builds upon the attraction between closed shell metal ions. We report on the [M2(bisNHC)2]2+ (M=AuI, AgI; NHC=N‐heterocyclic carbene) systems, which display almost identical features in the solid state. However, in solution the Au2 cation exhibits a significantly higher degree of rigidity owed to the stronger character of the aurophilic interactions. Both Au2 and Ag2 cationic constructs are able to accommodate Ag+ ions via M–M interactions, despite their inherent Coulombic repulsion. When electrostatic repulsion between host and guest is partially diminished, M–M distances are substantially shortened. Quantum chemical calculations estimate intermetallic bond orders up to 0.2. Although at the limit of (or beyond) the van der Waals radii, metallophilic interactions are responsible for their behavior in solution., Financial support from the University of Zaragoza (UZ2018‐CIE‐06), the Aragón Government (E42_17R, and A.V. predoctoral fellow), the MINECO (CTQ2017‐89132‐P) and the Generalitat de Catalunya (2017SGR1323) is kindly acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

pH-Responsive Self-Assembly of Amyloid Fibrils for Dual Hydrolase-Oxidase Reactions

  • Díaz Caballero, Marta
  • Navarro, Susanna
  • Nuez Martínez, Miquel
  • Peccati, Francesca
  • Rodríguez Santiago, Luis
  • Sodupe, Mariona
  • Teixidor, Francesc
  • Ventura, Salvador
There is an increasing interest in synthetic systems that can execute bioinspired chemical reactions without requiring the complex structures that characterize enzymes in their components. The hierarchical self-assembly of peptides provides a means to create catalytic microenvironments. Ideally, as it occurs in enzymes, the catalytic activity of peptide nanostructures should be reversibly regulated. In a typical enzyme mimetic design, the peptide’s self-assembling and catalytic activities are segregated into different regions of the sequence. Here, we aimed to design minimal peptides in which the self-assembly and function were all encoded in the same amino acids. Moreover, we wanted to endow the resulting one-component nanomaterial with divergent, chemically unrelated, catalytic activities, a property not observed in natural enzymes. We show that short peptides consisting only of histidine and tyrosine residues, arranged in a binary pattern, form biocompatible amyloid-like fibrils and hydrogels combining hydrolytic and electrocatalytic activities. The nanofibers’ mesoscopic properties are controlled by pH, the transition between assembled active β-sheet fibrils, and disassembled inactive random coil species occurring in a physiologically relevant pH range. The structure of one of such amyloid-like fibrils, as derived from molecular dynamic simulations, provides insights on how they attain this combination of structural and catalytic properties., We acknowledge the technical support from the Cell Culture Unit of Servei de Cultius Cel·lulars i Producció d’Anticossos i Citometria (SCAC) and of the Servei de Microscopia from Universitat Autònoma de Barcelona (UAB). F.P. acknowledges the Mizutani Foundation for Glycoscience (200077). M.S. and L.R.S. gratefully acknowledge financial support from MINECO (CTQ2017-89132-P) and the Generalitat de Catalunya (2017SGR1323)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Study of Fischer-Tropsch-type reactions on chondritic meteorites

  • Cabedo, Victoria
  • Llorca, J.
  • Trigo-Rodríguez, Josep María
  • Rimola, Albert
[Context] How simple organic matter appeared on Earth and the processes by which it transformed into more evolved organic compounds, which ultimately led to the emergence of life, is still an open topic. Different scenarios have been proposed, the main one assumes that simple organic compounds were synthesized, either in the gas phase or on the surfaces of dust grains, during the process of star formation and they were incorporated into larger bodies in the protoplanetary disk. The transformation of these simple organic compounds in more complex forms is still a matter of debate. Recent discoveries have pointed to catalytic properties of dust grains present in the early stellar envelope, which can nowadays be found in the form of chondrites. The significant infall of chondritic meteorites during the early periods of Earth suggests that the same reactions could have taken place in certain environments on the Earth's surface, with conditions more favorable for organic synthesis. [Aims] This work attempts to synthesize simple organic molecules, such as hydrocarbons and alcohols via Fischer-Tropsch-type reactions supported by different chondritic materials under early-Earth conditions, to investigate if organic synthesis can likely occur in this environment and to determine what the differences are in selectivity when using different types of chondrites. [Methods] Fischer-Tropsch-type reactions are investigated from mixtures of CO and H2 at 1 atm of pressure on the surfaces of different chondritic samples. The different products obtained are analyzed in situ by gas chromatography. [Results] Different Fischer-Tropsch reaction products are obtained in quantitative amounts. The formation of alkanes and alkenes being the main processes. The formation of alcohols also takes place in a smaller amount. Other secondary products were obtained in a qualitative way. [Conclusions] Chondritic material surfaces have been proven as good supports for the occurrence of organic synthesis. Under certain circumstances during the formation of Earth, they could have produced a suitable environment for these reactions to occur., J.M.T.-R. acknowledges financial support from research project PGC2018-097374-B-I00, funded by FEDER/Ministerio de Ciencia e Innovación – Agencia Estatal de Investigación. J.L. is grateful to ICREA Academia program and funding from Generalitat de Catalunya (2017 SGR 128). A.R. is indebted to the “Ramón y Cajal” program, MINECO project CTQ2017-89132-P, DIUE project 2017SGR1323, and funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement no. 865657) for the project “Quantum Chemistry on Interstellar Grains” (QUANTUMGRAIN).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Conformationally Restricted β-Sheet Breaker Peptides Incorporating Cyclic α-Methylisoserine Sulfamidates

  • Mazo, Nuria
  • Navo, Claudio D.
  • Peccati, Francesca
  • Andreo, Jacopo
  • Airoldi, Cristina
  • Goldsztejn, Gildas
  • Çarçabal, Pierre
  • Usabiaga, Imanol
  • Sodupe, Mariona
  • Wuttke, Stefan
  • Busto, Jesús H.
  • Peregrina, Jesús M.
  • Cocinero, Emilio J.
  • Jiménez-Osés, Gonzalo
Peptides containing variations of the β-amyloid hydrophobic core and five-membered sulfamidates derived from β-amino acid α-methylisoserine have been synthesized and fully characterized in the gas phase, solid state and in aqueous solution by a combination of experimental and computational techniques. The cyclic sulfamidate group effectively locks the secondary structure at the N-terminus of such hybrid peptides imposing a conformational restriction and stabilizing non-extended structures. This conformational bias, which is maintained in the gas phase, solid state and aqueous solution, is shown to be resistant to structure templating through assays of in vitro β-amyloid aggregation, acting as β-sheet breaker peptides with moderate activity., This work was funded by the Agencia Estatal de Investigación of Spain (AEI; grants CTQ2017-89132-P to M. S., RTI2018-099592-B-C21 to J. H. B., CTQ2017-89150-R to E.C. and RTI2018-099592-B-C22 to G. J. O. and the Severo Ochoa Excellence Accreditation (SEV-2016-0644 to CIC bioGUNE), the Italian Ministry of University and Research (MIUR; grant FABBR-MIUR 2018 to C. A.), the Basque Government (grants IT1162-19 and PIBA 2018-11 to E. C.) and Universidad del País Vasco (UPV/EHU; grants PPG17/10 and GIU18/207 to E. C.), CSIC (PIC2018, LINKA20249). F.P. thanks the Ministerio de Economía y Competitividad for a Juan de la Cierva Incorporación (IJC2020-045506-I) research contract., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Activating a Peroxo Ligand for C-O Bond Formation

  • del Río M.P.
  • Abril P.
  • López J.A.
  • Sodupe M.
  • Lledós A.
  • Ciriano M.A.
  • Tejel C.
Dioxygen activation for effective C-O bond formation in the coordination sphere of a metal is a long-standing challenge in chemistry for which the design of catalysts for oxygenations is slowed down by the complicated, and sometimes poorly understood, mechanistic panorama. In this context, olefin–peroxide complexes could be valuable models for the study of such reactions. Herein, we showcase the isolation of rare “Ir(cod)(peroxide)” complexes (cod=1, 5-cyclooctadiene) from reactions with oxygen, and then the activation of the peroxide ligand for O-O bond cleavage and C-O bond formation by transfer of a hydrogen atom through proton transfer/electron transfer reactions to give 2-iradaoxetane complexes and water. 2, 4, 6-Trimethylphenol, 1, 4-hydroquinone, and 1, 4-cyclohexadiene were used as hydrogen atom donors. These reactions can be key steps in the oxy-functionalization of olefins with oxygen, and they constitute a novel mechanistic pathway for iridium, whose full reaction profile is supported by DFT calculations. © 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Enhanced metallophilicity in metal-carbene systems: stronger character of aurophilic interactions in solution

  • Vellé, Alba
  • Rodríguez-Santiago, Luis
  • Sodupe, Mariona
  • Sanz Miguel, Pablo J.
Metallophilicity is an essential concept that builds upon the attraction between closed shell metal ions. We report on the [M-2(bisNHC)(2)](2+) (M=Au-I, Ag-I; NHC=N-heterocyclic carbene) systems, which display almost identical features in the solid state. However, in solution the Au-2 cation exhibits a significantly higher degree of rigidity owed to the stronger character of the aurophilic interactions. Both Au-2 and Ag-2 cationic constructs are able to accommodate Ag+ ions via M-M interactions, despite their inherent Coulombic repulsion. When electrostatic repulsion between host and guest is partially diminished, M-M distances are substantially shortened. Quantum chemical calculations estimate intermetallic bond orders up to 0.2. Although at the limit of (or beyond) the van der Waals radii, metallophilic interactions are responsible for their behavior in solution.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Role of mineral surfaces in prebiotic chemical evolution. In silico quantum mechanical studies

  • Rimola, Albert|||0000-0002-9637-4554
  • Sodupe, Mariona|||0000-0003-0276-0524
  • Ugliengo, Piero|||0000-0001-8886-9832
There is a consensus that the interaction of organic molecules with the surfaces of naturally-occurring minerals might have played a crucial role in chemical evolution and complexification in a prebiotic era. The hurdle of an overly diluted primordial soup occurring in the free ocean may have been overcome by the adsorption and concentration of relevant molecules on the surface of abundant minerals at the sea shore. Specific organic-mineral interactions could, at the same time, organize adsorbed molecules in well-defined orientations and activate them toward chemical reactions, bringing to an increase in chemical complexity. As experimental approaches cannot easily provide details at atomic resolution, the role of in silico computer simulations may fill that gap by providing structures and reactive energy profiles at the organic-mineral interface regions. Accordingly, numerous computational studies devoted to prebiotic chemical evolution induced by organic-mineral interactions have been proposed. The present article aims at reviewing recent in silico works, mainly focusing on prebiotic processes occurring on the mineral surfaces of clays, iron sulfides, titanium dioxide, and silica and silicates simulated through quantum mechanical methods based on the density functional theory (DFT). The DFT is the most accurate way in which chemists may address the behavior of the molecular world through large models mimicking chemical complexity. A perspective on possible future scenarios of research using in silico techniques is finally proposed.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Water adsorption on MO2 (M = Ti, Ru, and Ir) surfaces. Importance of octahedral distortion and cooperative effects

  • González, Danilo|||0000-0002-2316-2016
  • Heras-Domingo, Javier|||0000-0002-4322-3146
  • Pantaleone, Stefano|||0000-0002-2457-1065
  • Rimola, Albert|||0000-0002-9637-4554
  • Rodríguez-Santiago, Luis|||0000-0003-4983-4228
  • Solans-Monfort, Xavier|||0000-0002-2172-3895
  • Sodupe, Mariona|||0000-0003-0276-0524
Understanding metal oxide MO2 (M = Ti, Ru, and Ir)-water interfaces is essential to assess the catalytic behavior of these materials. The present study analyzes the H2O-MO2 interactions at the most abundant (110) and (011) surfaces, at two different water coverages: isolated water molecules and full monolayer, by means of Perdew-Burke-Ernzerhof-D2 static calculations and ab initio molecular dynamics (AIMD) simulations. Results indicate that adsorption preferably occurs in its molecular form on (110)-TiO2 and in its dissociative form on (110)-RuO2 and (110)-IrO2. The opposite trend is observed at the (011) facet. This different behavior is related to the kind of octahedral distortion observed in the bulk of these materials (tetragonal elongation for TiO2 and tetragonal compression for RuO2 and IrO2) and to the different nature of the vacant sites created, axial on (110) and equatorial on (011). For the monolayer, additional effects such as cooperative H-bond interactions and cooperative adsorption come into play in determining the degree of deprotonation. For TiO2, AIMD indicates that the water monolayer is fully undissociated at both (110) and (011) surfaces, whereas for RuO2, water monolayer exhibits a 50% dissociation, the formation of H3O2 - motifs being essential. Finally, on (110)-IrO2, the main monolayer configuration is the fully dissociated one, whereas on (011)-IrO2, it exhibits a degree of dissociation that ranges between 50 and 75%. Overall, the present study shows that the degree of water dissociation results from a delicate balance between the H2O-MO2 intrinsic interaction and cooperative hydrogen bonding and adsorption effects.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Atomically dispersed Iridium on Indium tin oxide efficiently catalyzes water oxidation

  • Lebedev, Dmitry|||0000-0002-1866-9234
  • Ezhov, Roman
  • Heras-Domingo, Javier|||0000-0002-4322-3146
  • Comas-Vives, Aleix|||0000-0002-7002-1582
  • Kaeffer, Nicolas
  • Willinger, Marc|||0000-0002-9996-7953
  • Solans-Monfort, Xavier|||0000-0002-2172-3895
  • Huang, Xing|||0000-0002-8700-0606
  • Pushkar, Yulia|||0000-0001-7949-6472
  • Copéret, Christophe|||0000-0001-9660-3890
Heterogeneous catalysts in the form of atomically dispersed metals on a support provide the most efficient utilization of the active component, which is especially important for scarce and expensive late transition metals. These catalysts also enable unique opportunities to understand reaction pathways through detailed spectroscopic and computational studies. Here, we demonstrate that atomically dispersed iridium sites on indium tin oxide prepared via surface organometallic chemistry display exemplary catalytic activity in one of the most challenging electrochemical processes, the oxygen evolution reaction (OER). In situ X-ray absorption studies revealed the formation of Ir V =O intermediate under OER conditions with an Ir-O distance of 1.83 Å. Modeling of the reaction mechanism indicates that Ir V =O is likely a catalyst resting state, which is subsequently oxidized to Ir VI enabling fast water nucleophilic attack and oxygen evolution. We anticipate that the applied strategy can be instrumental in preparing and studying a broad range of atomically dispersed transition metal catalysts on conductive oxides for (photo)electrochemical applications. Site-isolated Ir on ITO is identified as an efficient acidic water splitting catalyst. In situ spectroscopy and modeling reveal the key Ir V =O intermediate and allow proposing the reaction mechanism.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Switching acidic and basic catalysis through supramolecular functionalization in a porous 3D covalent imine-based material

  • Luis-Barrerra, Javier|||0000-0002-3438-6955
  • Cano, Rafael|||0000-0002-0466-4889
  • Imani-Shakibaei, Ghazaleh
  • Heras-Domingo, Javier|||0000-0002-4322-3146
  • Pérez-Carvajal, Javier|||0000-0002-6916-1158
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Solans-Monfort, Xavier|||0000-0002-2172-3895
  • Aleman Lara, Jose Julian|||0000-0003-0164-1777
  • Mas Balleste, Ruben|||0000-0003-1988-8700
Non-covalent inclusion of small acid and base molecules (CHCOOH and NEt) in an imine structure based on micrometre COF-300 crystals and amorphous nanoparticles results in the facile modulation of their acid-base properties. Such a strategy results in the triggering of acidic/basic catalytic activity of the otherwise inactive materials towards ring-opening epoxide and Knoevenagel condensation reactions. For both reactions, amorphous nanoparticles are better catalysts than micrometre crystals as they exhibit a higher external surface area. The found activities and stability of this supramolecular functionalization are modulated by confinement effects, which are rationalized with the help of DFT calculations. All results obtained suggest that the reactions catalysed by these functionalized materials occur confined to pores closer to the material surface, which makes size-discrimination phenomena possible, and explains the major activity of the nanoparticulated material.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Computational Surface Modelling of Ices and Minerals of Interstellar Interest-Insights and Perspectives

  • Rimola, Albert|||0000-0002-9637-4554
  • Ferrero, Stefano|||0000-0001-7819-7657
  • Germain, Aurèle|||0000-0001-7856-0516
  • Corno, Marta|||0000-0001-7248-2705
  • Ugliengo, Piero|||0000-0001-8886-9832
The universe is molecularly rich, comprising from the simplest molecule (H2) to complex organic molecules (e.g., CH3CHO and NH2CHO), some of which of biological relevance (e.g., amino acids). This chemical richness is intimately linked to the different physical phases forming Solar-like planetary systems, in which at each phase, molecules of increasing complexity form. Interestingly, synthesis of some of these compounds only takes place in the presence of interstellar (IS) grains, i.e., solid-state sub-micron sized particles consisting of naked dust of silicates or carbonaceous materials that can be covered by water-dominated ice mantles. Surfaces of IS grains exhibit particular characteristics that allow the occurrence of pivotal chemical reactions, such as the presence of binding/catalytic sites and the capability to dissipate energy excesses through the grain phonons. The present know-how on the physicochemical features of IS grains has been obtained by the fruitful synergy of astronomical observational with astrochemical modelling and laboratory experiments. However, current limitations of these disciplines prevent us from having a full understanding of the IS grain surface chemistry as they cannot provide fundamental atomic-scale of grain surface elementary steps (i.e., adsorption, diffusion, reaction and desorption). This essential information can be obtained by means of simulations based on computational chemistry methods. One capability of these simulations deals with the construction of atom-based structural models mimicking the surfaces of IS grains, the very first step to investigate on the grain surface chemistry. This perspective aims to present the current state-of-the-art methods, techniques and strategies available in computational chemistry to model (i.e., construct and simulate) surfaces present in IS grains. Although we focus on water ice mantles and olivinic silicates as IS test case materials to exemplify the modelling procedures, a final discussion on the applicability of these approaches to simulate surfaces of other cosmic grain materials (e.g., cometary and meteoritic) is given.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Adsorption of Pharmaceuticals onto Smectite Clay Minerals, a combined experimental and theoretical study

  • Corbin, Gwenaëlle
  • Vulliet, Emmanuelle
  • Lanson, Bruno|||0000-0003-1187-3221
  • Rimola, Albert|||0000-0002-9637-4554
  • Mignon, Pierre
The adsorption of two pharmaceuticals, carbamazepine and paracetamol, onto the expandable clay mineral saponite has been studied through the combination of kinetic experiments, X-ray diffraction, and theoretical modeling. Kinetic experiments indicate low adsorption for carbamazepine and paracetamol on expandable smectite clay. Accordingly, X-ray diffraction experiments show that neither compound enters smectite interlayer space. Molecular dynamics simulations were carried out to understand the interactions between the two pharmaceuticals and the saponite basal surface in the presence of Na+ cations. Calculations reveal that paracetamol almost does not coordinate solution cations, whereas a rather low coordination to cation is observed for carbamazepine. As a result, the adsorption onto the clay surface results mainly from van der Waals interactions for both pharmaceuticals. Carbamazepine does adsorb the surface via two configurations, one involving cation coordination, which corresponds to a rather stable adsorption compared to paracetamol. This is confirmed by structural analyses completed with desorption free energy profile.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Atomistic fibrillar architectures of polar prion-inspired heptapeptides

  • Peccati, Francesca|||0000-0002-7813-8216
  • Díaz-Caballero, Marta|||0000-0001-9032-9819
  • Navarro, Susanna|||0000-0001-8160-9536
  • Rodríguez-Santiago, Luis|||0000-0003-4983-4228
  • Ventura, Salvador|||0000-0002-9652-6351
  • Sodupe, Mariona|||0000-0003-0276-0524
This article provides the computational prediction of the atomistic architectures resulting from self-assembly of the polar heptapeptide sequences NYNYNYN, SYSYSYS and GYGYGYG. Using a combination of molecular dynamics and a newly developed tool for non-covalent interaction analysis, we uncover the properties of a new class of bionanomaterials, including hydrogen-bonded polar zippers, and the relationship between peptide composition, fibril geometry and weak interaction networks. Our results, corroborated by experimental observations, provide the basis for the rational design of prion-inspired nanomaterials.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Influence of Aromatic Cations on the Structural Arrangement of Hg(II) Halides

  • Sánchez Férez, Francisco|||0000-0002-9546-6828
  • Solans-Monfort, Xavier|||0000-0002-2172-3895
  • Calvet, Teresa|||0000-0002-4058-7171
  • Font-Bardia, Mercè|||0000-0002-7892-8744
  • Pons Picart, Josefina|||0000-0003-1834-9326
Understanding the structure and arrangement of hybrid metal halides and their contribution to the optoelectronic properties is, thus far, a challenging topic. In particular, new materials composed of d 10 metal halides and pyridinium cations are still largely unexplored. Therefore, we report the synthesis and characterization of six Hg(II) salts built up from (HgCl) 2- or (HgX) 2- anions (X = Cl, Br, I) and 2,2'-bipyridium (2,2'-Hbipy) +, 2,2'-bipyridine-1,1'-diium (2,2'-Hbipy) 2+, or 1,10-phenantrolinium (1,10-Hphen) + cations, using the same experimental conditions. All of them have been characterized by PXRD, EA, FTIR-ATR, and 1 H NMR spectroscopies; single-crystal X-ray diffraction; and TG/DTA determinations. The study of their packing via Hirshfeld surface analysis and 3D deformation density mapping revealed the contributions of the intermolecular interactions to the structural arrangement, notably, the effect of the cation planarity on them. Successively, periodic DFT calculations showed that (i) the valence and conducting bands are mainly composed of the p orbitals of the halide and the organic cation, respectively, and (ii) the corresponding band gap depends mainly on the halide.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Multiscale computational simulation of amorphous silicates' structural, dielectric, and vibrational spectroscopic properties

  • Martinez Gonzalez, Jose Angel|||0000-0001-5262-6732
  • Navarro Ruiz, Javier|||0000-0002-3604-9338
  • Rimola, Albert|||0000-0002-9637-4554
Silicates are among the most abundant and important inorganic materials, not only in the Earth's crust, but also in the interstellar medium in the form of micro/nanoparticles or embedded in the matrices of comets, meteorites, and other asteroidal bodies. Although the crystalline phases of silicates are indeed present in nature, amorphous forms are also highly abundant. Here, we report a theoretical investigation of the structural, dielectric, and vibrational properties of the amorphous bulk for forsterite (MgSiO) as a silicate test case by a combined approach of classical molecular dynamics (MD) simulations for structure evolution and periodic quantum mechanical Density Functional Theory (DFT) calculations for electronic structure analysis. Using classical MD based on an empirical partial charge rigid ionic model within a melt-quenching scheme at different temperatures performed with the GULP 4.0 code, amorphous bulk structures for MgSiO were generated using the crystalline phase as the initial guess. This has been done for bulk structures with three different unit cell sizes, adopting a super-cell approach; that is, 1 × 1 × 2, 2 × 1 × 2, and 2 × 2 × 2. The radial distribution functions indicated a good degree of amorphization of the structures. Periodic B3LYP-geometry optimizations performed with the CRYSTAL14 code on the generated amorphous systems were used to analyze their structure; to calculate their high-frequency dielectric constants (ε); and to simulate their IR, Raman, and reflectance spectra, which were compared with the experimental and theoretical crystalline MgSiO. The most significant changes of the physicochemical properties of the amorphous systems compared to the crystalline ones are presented and discussed (e.g., larger deviations in the bond distances and angles, broadening of the IR bands, etc.), which are consistent with their disordered nature. It is also shown that by increasing the unit cell size, the bulk structures present a larger degree of amorphization.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Importance of the oxyl character on the IrO2 surface dependent catalytic activity for the oxygen evolution reaction

  • González, Danilo|||0000-0002-2316-2016
  • Heras-Domingo, Javier|||0000-0002-4322-3146
  • Sodupe, Mariona|||0000-0003-0276-0524
  • Rodríguez-Santiago, Luis|||0000-0003-4983-4228
  • Solans-Monfort, Xavier|||0000-0002-2172-3895
The oxygen evolution reaction catalyst optimization is hindered because in the desirable acidic conditions the sole active catalysts are RuO and IrO. Thus, the understanding of the factors controlling the reactivity of these materials is mandatory. In this contribution, DFT (PBE-D2) periodic calculations are performed to analyze the catalytic activities of the main ((1 1 0), (0 1 1), (1 0 0) and (0 0 1)) IrO surfaces. Results show that the reaction only occurs if the Ir=O species on the surfaces exhibit an oxyl character. The water nucleophilic attack mechanism is the most favorable pathway on the (1 1 0), (1 0 0) and (0 0 1) surfaces. In contrast, for the (0 1 1) facet the oxo-coupling is preferred. The required overpotentials for the four IrO surfaces depend on the feasibility to oxidize the Ir-OH to Ir-O species and this is tuned by the coordination of the unsaturated iridium sites: the (1 0 0) and (0 0 1) surfaces appear to be more active than the (1 1 0) and (0 1 1).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ab-initio computational study on Fe2NiP schreibersite, bulk and surface characterization

  • Pantaleone, Stefano|||0000-0002-2457-1065
  • Corno, Marta|||0000-0001-7248-2705
  • Rimola, Albert|||0000-0002-9637-4554
  • Balucani, Nadia|||0000-0001-5121-5683
  • Ugliengo, Piero|||0000-0001-8886-9832
Phosphorus is ubiquitous in planet Earth and plays a fundamental role in all living systems. Finding a reasonable prebiotic source of phosphorus is not trivial, as common sources where it is present nowadays are in the form of phosphate minerals, which are rather insoluble and nonreactive materials, making it unavailable for ready incorporation in living organisms. A possible source of phosphorus is from exogenous meteoritic bombardment and, in particular, iron/nickel phosphides. These materials, by simple interaction with water, produce oxygenated phosphorus compounds, which can easily react with organic molecules, thus forming C-O-P bonds. In the present work, periodic ab initio simulations at the PBE level (inclusive of dispersion interactions) have been carried out on metallic Fe2NiP schreibersite, as a relatively abundant component of metallic meteorites, in order to characterize the structural, energetic, and vibrational properties of both bulk and surfaces of this material. The aim is to study the relative stability among different surfaces and also to characterize the nanocrystal morphology of the mineral.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Accurate 3D fireball trajectory and orbit calculation using the 3D-FIRETOC automatic Python code

  • Peña-Asensio, Eloy|||0000-0002-7257-2150
  • Trigo-Rodríguez, J.M.|||0000-0001-8417-702X
  • Gritsevich, Maria|||0000-0003-4268-6277
  • Rimola, Albert|||0000-0002-9637-4554
The disruption of asteroids and comets produces cm-sized meteoroids that end up impacting the Earth's atmosphere and producing bright fireballs that might have associated shock waves or, in geometrically favourable occasions excavate craters that put them into unexpected hazardous scenarios. The astrometric reduction of meteors and fireballs to infer their atmospheric trajectories and heliocentric orbits involves a complex and tedious process that generally requires many manual tasks. To streamline the process, we present a software package called SPMN 3D Fireball Trajectory and Orbit Calculator (3D-FIRETOC), an automatic Python code for detection, trajectory reconstruction of meteors, and heliocentric orbit computation from video recordings. The automatic 3D-FIRETOC package comprises of a user interface and a graphic engine that generates a realistic 3D representation model, which allows users to easily check the geometric consistency of the results and facilitates scientific content production for dissemination. The software automatically detects meteors from digital systems, completes the astrometric measurements, performs photometry, computes the meteor atmospheric trajectory, calculates the velocity curve, and obtains the radiant and the heliocentric orbit, all in all quantifying the error measurements in each step. The software applies corrections such as light aberration, refraction, zenith attraction, diurnal aberration, and atmospheric extinction. It also characterizes the atmospheric flight and consequently determines fireball fates by using the α - β criterion that analyses the ability of a fireball to penetrate deep into the atmosphere and produce meteorites. We demonstrate the performance of the software by analysing two bright fireballs recorded by the Spanish Fireball and Meteorite Network (SPMN).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Study of Fischer-Tropsch-type reactions on chondritic meteorites

  • Cabedo Soto, Victoria|||0000-0002-6944-9207
  • Llorca, Jordi|||0000-0002-7447-9582
  • Trigo-Rodríguez, J.M.|||0000-0001-8417-702X
  • Rimola, Albert|||0000-0002-9637-4554
Context. How simple organic matter appeared on Earth and the processes by which it transformed into more evolved organic compounds, which ultimately led to the emergence of life, is still an open topic. Different scenarios have been proposed, the main one assumes that simple organic compounds were synthesized, either in the gas phase or on the surfaces of dust grains, during the process of star formation and they were incorporated into larger bodies in the protoplanetary disk. The transformation of these simple organic compounds in more complex forms is still a matter of debate. Recent discoveries have pointed to catalytic properties of dust grains present in the early stellar envelope, which can nowadays be found in the form of chondrites. The significant infall of chondritic meteorites during the early periods of Earth suggests that the same reactions could have taken place in certain environments on the Earth's surface, with conditions more favorable for organic synthesis. Aims. This work attempts to synthesize simple organic molecules, such as hydrocarbons and alcohols via Fischer-Tropsch-type reactions supported by different chondritic materials under early-Earth conditions, to investigate if organic synthesis can likely occur in this environment and to determine what the differences are in selectivity when using different types of chondrites. Methods. Fischer-Tropsch-type reactions are investigated from mixtures of CO and H2 at 1 atm of pressure on the surfaces of different chondritic samples. The different products obtained are analyzed in situ by gas chromatography. Results. Different Fischer-Tropsch reaction products are obtained in quantitative amounts. The formation of alkanes and alkenes being the main processes. The formation of alcohols also takes place in a smaller amount. Other secondary products were obtained in a qualitative way. Conclusions. Chondritic material surfaces have been proven as good supports for the occurrence of organic synthesis. Under certain circumstances during the formation of Earth, they could have produced a suitable environment for these reactions to occur.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Interaction of HCO+ cations with interstellar negative frains. Quantum chemical investigation and astrophysical implications

  • Rimola, Albert|||0000-0002-9637-4554
  • Ceccarelli, Cecilia|||0000-0001-9664-6292
  • Balucani, Nadia|||0000-0001-5121-5683
  • Ugliengo, Piero|||0000-0001-8886-9832
In cold galactic molecular clouds, dust grains are coated by icy mantles and are prevalently charged negatively, because of the capture of the electrons in the gas. The interaction of the charged grains with gaseous cations is known to neutralize them. In this work, we focus on the chemical consequences of the neutralization process of HCO+, often the most abundant cation in molecular clouds. More specifically, by means of electronic structure calculations, we have characterized the energy and the structure of all possible product species once the HCO+ ion adsorbs on water clusters holding an extra electron. Two processes are possible: (i) electron transfer from the negative water cluster to the HCO+ ion or (ii) a proton transfer from HCO+ to the negative water cluster. Energetic considerations favor electron transfer. Assuming this scenario, two limiting cases have been considered in astrochemical models: (a) all the neutralized HCO+ is retained as neutral HCO adsorbed on the ice and (b) all the neutralized HCO+ gets desorbed to the gas phase as HCO. None of the two limiting cases appreciably contribute to the HCO abundance on the grain surfaces or in the gas.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Formation of interstellar silicate dust via nanocluster aggregation, Insights from quantum chemistry simulations

  • Rimola, Albert|||0000-0002-9637-4554
  • Bromley, Stefan|||0000-0002-7037-0475
The issue of formation of dust grains in the interstellar medium is still a matter of debate. One of the most developed proposals suggests that atomic and heteromolecular seeds bind together to initiate a nucleation process leading to the formation of nanostructures resembling very small grain components. In the case of silicates, nucleated systems can result in molecular nanoclusters with diameters ≤ 2 nm. A reasonable path to further increase the size of these proto-silicate nanoclusters is by mutual aggregation. The present work deals with modeling this proto-silicate nanocluster aggregation process by means of quantum chemical density functional theory calculations. We simulate nanocluster aggregation by progressively reducing the size of a periodic array of initially well-separated nanoclusters. The resulting aggregation leads to a set of silicate bulk structures with gradually increasing density which we analyze with respect to structure, energetics and spectroscopic properties. Our results indicate that aggregation is a highly energetically favorable process, in which the infrared spectra of the finally formed amorphous silicates match well with astronomical observations.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Does processing or formation of water ice mantles affect the capacity of nanosilicates to be the source of anomalous microwave emission?

  • Mariñoso Guiu, Joan
  • Ferrero, Stefano|||0000-0001-7819-7657
  • Macià Escatllar, Antonio
  • Rimola, Albert|||0000-0002-9637-4554
  • Bromley, Stefan|||0000-0002-7037-0475
Anomalous microwave emission (AME) is detected in many astrophysical environments as a foreground feature typically peaking between 20-30 GHz and extending over a 10-60 GHz range. One of the leading candidates for the source of AME is small spinning dust grains. Such grains should be very small (approx. ≤1 nm diameter) in order for the rotational emission to fall within the observed frequency range. In addition, these nanosized grains should possess a significant dipole moment to account for the observed emissivities. These constraints have been shown to be compatible with spinning bare nanosilicate clusters, assuming that ∼1% of the total Si mass budget is held in these ultrasmall grains. Silicate dust can be hydroxylated by processing in the interstellar medium and is generally known to provide seeds for molecular water ice nucleation in denser regions. Herein, we use quantum chemical calculations to investigate how the dipole moment of Mg-rich pyroxenic (MgSiO3) nanoclusters is affected by both accretion of molecular water and dissociative hydration. Our work thus provides an indication of how the formation of water ice mantles is likely to affect the capacity of nanosilicates to generate AME.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Theoretical computations on the efficiency of acetaldehyde formation on interstellar icy grains

  • Enrique-Romero, Joan|||0000-0002-2147-7735
  • Ceccarelli, Cecilia|||0000-0001-9664-6292
  • Rimola, Albert|||0000-0002-9637-4554
  • Skouteris, Dimitrios
  • Balucani, Nadia|||0000-0001-5121-5683
  • Ugliengo, Piero|||0000-0001-8886-9832
Context: Interstellar grains are known to be important actors in the formation of interstellar molecules such as H2, water, ammonia, and methanol. It has been suggested that the so-called interstellar complex organic molecules (iCOMs) are also formed on the interstellar grain icy surfaces by the combination of radicals via reactions assumed to have an efficiency equal to unity. Aims: In this work, we aim to investigate the robustness or weakness of this assumption. In particular, we consider the case of acetaldehyde (CH3CHO), one of the most abundant and commonly identified iCOMs, as a starting study case. In the literature, it has been postulated that acetaldehyde is formed on the icy surfaces via the combination of HCO and CH3. Here we report new theoretical computations on the efficiency of its formation. Methods: To this end, we coupled quantum chemical calculations of the energetics and kinetics of the reaction CH3 + HCO, which can lead to the formation of CH3CHO or CO + CH4. Specifically, we combined reaction kinetics computed with the Rice-Ramsperger-Kassel-Marcus theory (tunneling included) method with diffusion and desorption competitive channels. We provide the results of our computations in the format used by astrochemical models to facilitate their exploitation. Results: Our new computations indicate that the efficiency of acetaldehyde formation on the icy surfaces is a complex function of the temperature and, more importantly, of the assumed diffusion over binding energy ratio f of the CH3 radical. If the ratio f is ≥0.4, the efficiency is equal to unity in the range where the reaction can occur, namely between 12 and 30 K. However, if f is smaller, the efficiency dramatically crashes: with f = 0.3, it is at most 0.01. In addition, the formation of acetaldehyde is always in competition with that of CO + CH4. Conclusions: Given the poor understanding of the diffusion over binding energy ratio f and the dramatic effect it has on the formation, or not, of acetaldehyde via the combination of HCO and CH3 on icy surfaces, model predictions based on the formation efficiency equal to one should to be taken with precaution. The latest measurements of f suggest f = 0.3 and, if confirmed for CH3, this would rule out the formation of acetaldehyde on the interstellar icy surfaces. We recall the alternative possibility, which was recently reviewed, that acetaldehyde could be synthesized in the gas phase starting from ethanol. Finally, our computations show the paramount importance played by the micro-physics involved in the interstellar surface chemistry and call for extensive similar studies on different systems believed to form iCOMs on the interstellar icy surfaces.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Water interaction with Fe2NiP Schreibersite (110) surface, a quantum mechanical atomistic perspective

  • Pantaleone, Stefano|||0000-0002-2457-1065
  • Corno, Marta|||0000-0001-7248-2705
  • Rimola, Albert|||0000-0002-9637-4554
  • Balucani, Nadia|||0000-0001-5121-5683
  • Ugliengo, Piero|||0000-0001-8886-9832
Phosphorus is an element of primary importance for all living creatures, being present in many biological activities in the form of phosphate (PO43-). However, there are still open questions about the origin of this specific element and on the transformation that allowed it to be incorporated in biological systems. The most probable source of prebiotic phosphorus is the intense meteoritic bombardment during the Archean era, a few million years after the solar system formation, which brought tons of iron-phosphide materials (schreibersite) on the early Earth crust. It was recently demonstrated that by simple wetting/corrosion processes from this material, various oxygenated phosphorus compounds are produced. In the present work, the wetting process of schreibersite (Fe2NiP) was studied by computer simulations using density functional theory, with the PBE functional supplemented with dispersive interactions through a posteriori empirical correction. To start disentangling the complexity of the system, only the most stable (110) surface of Fe2NiP was used simulating different water coverages, from which structures, water binding energies, and vibrational spectra have been predicted. The computed (ana-)harmonic infrared spectra have been compared with the experimental ones, thus, confirming the validity of the adopted methodology and models.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Non-energetic Formation of Ethanol via CCH Reaction with Interstellar H2O Ices. A Computational Chemistry Study

  • Perrero, Jessica|||0000-0003-2161-9120
  • Enrique-Romero, Joan|||0000-0002-2147-7735
  • Martínez-Bachs, Berta|||0000-0002-1290-7019
  • Ceccarelli, Cecilia|||0000-0001-9664-6292
  • Balucani, Nadia|||0000-0001-5121-5683
  • Ugliengo, Piero|||0000-0001-8886-9832
  • Rimola, Albert|||0000-0002-9637-4554
Ethanol (CHCHOH) is a relatively common molecule, often found in star-forming regions. Recent studies suggest that it could be a parent molecule of several so-called interstellar complex organic molecules (iCOMs). However, the formation route of this species remains under debate. In the present work, we study the formation of ethanol through the reaction of CCH with one HO molecule belonging to the ice as a test case to investigate the viability of chemical reactions based on a "radical + ice component" scheme as an alternative mechanism for the synthesis of iCOMs, beyond the usual radical-radical coupling. This has been done by means of DFT calculations adopting two clusters of 18 and 33 water molecules as ice models. Results indicate that CHCHOH can potentially be formed by this proposed reaction mechanism. The reaction of CCH with HO on the water ice clusters can be barrierless (because of the help of boundary icy water molecules acting as proton-transfer assistants), leading to the formation of vinyl alcohol precursors (HCCOH and CHCHOH). Subsequent hydrogenation of vinyl alcohol yielding ethanol is the only step presenting a low activation energy barrier. We finally discuss the astrophysical implications of these findings.
Dipòsit Digital de Documents de la UAB
Publicación Capítulo o parte de un libro (BookPart)

Ab initio Calculation of Binding Energies of Interstellar Sulphur-Containing Species on Crystalline Water Ice Models

  • Perrero, Jessica|||0000-0003-2161-9120
  • Rimola, Albert|||0000-0002-9637-4554
  • Corno, Marta|||0000-0001-7248-2705
  • Ugliengo, Piero|||0000-0001-8886-9832
There are different environments in the interstellar medium (ISM), depending on the density, temperature and chemical composition. Among them, molecular clouds, often referred to as the cradle of stars, are paradigmatic environments relative to the chemical diversity and complexity in space. Indeed, there, radio to far-infrared observations revealed the presence of several molecules in the gas phase, while near-infrared spectroscopy detected the existence of submicron sized dust grains covered by H2O-dominated ice mantles. The interaction between gas-phase species and the surfaces of water ices is measured by the binding energy (BE), a crucial parameter in astrochemical modelling. In this work, the BEs of a set of sulphur-containing species on water ice mantles have been computed by adopting a periodic ab initio approach using a crystalline surface model. The Density Functional Theory (DFT)-based B3LYP-D3(BJ) functional was used for the prediction of the structures and energetics. DFT BEs were refined by adopting an ONIOM-like procedure to estimate them at CCSD(T) level toward complete basis set extrapolation, in which a very good correlation between values has been found. Moreover, we show that geometry optimization with the computationally cheaper HF-3c method followed by single point energy calculations at DFT to compute the BEs is a suitable cost-effective recipe to arrive at BE values of the same quality as those computed at full DFT level. Finally, computed data were compared with the available literature data.
Dipòsit Digital de Documents de la UAB
Publicación Capítulo o parte de un libro (BookPart)

Computational Investigation on the Thermodynamics of H2CO + NH2 → NH2CHO + H on Interstellar Water Ice Surfaces

  • Martínez-Bachs, Berta|||0000-0002-1290-7019
  • Rimola, Albert|||0000-0002-9637-4554
Formamide has a key role in prebiotic chemistry as it is the simplest molecule containing the four most important atoms from a biological point of view: hydrogen, carbon, nitrogen and oxygen. Due to its importance, the formation of this molecule has been studied and different pathways have been considered both in gas-phase and on ices of dust grains since it was first detected. In the present work, the thermodynamics of the formation route of formamide starting from NH2 and H2CO, a reaction channel proposed to occur in the gas phase, has been theoretically investigated in the scenario taking place on icy dust grains modelled by both a cluster and a periodic approach. Different DFT functionals have been employed to obtain accurate energy values for the mechanistic steps involved in the reaction.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Metal coordination determines the catalytic activity of IrO2 nanoparticles for the oxygen evolution reaction

  • González, Danilo|||0000-0002-2316-2016
  • Sodupe, Mariona|||0000-0003-0276-0524
  • Rodríguez-Santiago, Luis|||0000-0003-4983-4228
  • Solans-Monfort, Xavier|||0000-0002-2172-3895
H2 production through water electrolysis is a promising strategy for storing sunlight energy. For the oxygen evolution reaction, iridium oxide containing materials are state-of-the-art due to their stability in acidic conditions. Moreover, precious metal content can be reduced by using small nanoparticles that show high catalytic activities. We performed DFT calculations on a 1.2 nm large IrO2 Wulff-like stoichiometric nanoparticle model (IrO2) with the aim of determining the factors controlling the catalytic activity of IrO2 nanoparticles. Results show that at reaction conditions tetra- and tricoordinated iridium centers are not fully oxidized, the major species being IrO(OH) and IrO(OH)2, respectively. Although the computed overpotential show that all centers present relatively similar reactivities, low coordinated iridium centers tend to be more active than the pentacoordinates sites of the well-defined facets. These low coordination sites are likely more abundant on amorphous nanoparticles, which could be one of the factors explaining the higher catalytic activity observed for non-crystalline materials.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Surface morphology controls water dissociation on hydrated IrO2 nanoparticles

  • González, Danilo|||0000-0002-2316-2016
  • Sodupe, Mariona|||0000-0003-0276-0524
  • Rodríguez-Santiago, Luis|||0000-0003-4983-4228
  • Solans-Monfort, Xavier|||0000-0002-2172-3895
Iridium oxide is a highly efficient catalyst for the oxygen evolution reaction, whose large-scale application requires decreasing the metal content. This is achieved using small nanoparticles. The knowledge of the water-IrO2 nanoparticle interface is of high importance to understand the IrO2 behavior as electrocatalyst in aqueous solutions. In this contribution, DFT (PBE-D2) calculations and AIMD simulations on IrO2 nanoparticle models of different sizes ((IrO2)33 and (IrO2)115) are performed. Results show that two key factors determine the H2O adsorption energy and the preferred adsorption structure (molecular or dissociated water): metal coordination and hydrogen bonding with oxygen bridge atoms of the IrO2 surface. Regarding metal coordination, and since the tetragonal distortion existing in IrO2 is retained on the nanoparticle models, the adsorption at iridium axial vacant sites implies stronger Ir-H2O interactions, which favors water dissociation. In contrast, Ir-H2O interaction at equatorial vacant sites is weaker and thus the relative stability of molecular and dissociated forms becomes similar. Hydrogen bonding increases adsorption energy and favors water dissociation. Thus, tip and corner sites of the nanoparticle, with no oxygen bridge atoms nearby, exhibit the smallest adsorption energies and a preference for the molecular form. Overall, the presence of rather isolated tip and corner sites in the nanoparticle leads to lower adsorption energies and a smaller degree of water dissociation when compared with extended surfaces.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

pH-responsive self-assembly of amyloid fibrils for dual hydrolase-oxidase reactions

  • Díaz-Caballero, Marta|||0000-0001-9032-9819
  • Navarro, Susanna|||0000-0001-8160-9536
  • Nuez-Martínez, Miquel
  • Peccati, Francesca|||0000-0002-7813-8216
  • Rodríguez-Santiago, Luis|||0000-0003-4983-4228
  • Sodupe, Mariona|||0000-0003-0276-0524
  • Teixidor, Francesc|||0000-0002-3010-2417
  • Ventura, Salvador|||0000-0002-9652-6351
There is an increasing interest in synthetic systems that can execute bioinspired chemical reactions without requiring the complex structures that characterize enzymes in their components. The hierarchical self-assembly of peptides provides a means to create catalytic microenvironments. Ideally, as it occurs in enzymes, the catalytic activity of peptide nanostructures should be reversibly regulated. In a typical enzyme mimetic design, the peptide's self-assembling and catalytic activities are segregated into different regions of the sequence. Here, we aimed to design minimal peptides in which the self-assembly and function were all encoded in the same amino acids. Moreover, we wanted to endow the resulting one-component nanomaterial with divergent, chemically unrelated, catalytic activities, a property not observed in natural enzymes. We show that short peptides consisting only of histidine and tyrosine residues, arranged in a binary pattern, form biocompatible amyloid-like fibrils and hydrogels combining hydrolytic and electrocatalytic activities. The nanofibers' mesoscopic properties are controlled by pH, the transition between assembled active β-sheet fibrils, and disassembled inactive random coil species occurring in a physiologically relevant pH range. The structure of one of such amyloid-like fibrils, as derived from molecular dynamic simulations, provides insights on how they attain this combination of structural and catalytic properties.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

BCN-M, a free computational tool for generating Wulff-like nanoparticle models with controlled stoichiometry

  • González, Danilo|||0000-0002-2316-2016
  • Camino, Bruno|||0000-0002-9569-2219
  • Heras-Domingo, Javier|||0000-0002-4322-3146
  • Rimola, Albert|||0000-0002-9637-4554
  • Rodríguez-Santiago, Luis|||0000-0003-4983-4228
  • Solans-Monfort, Xavier|||0000-0002-2172-3895
  • Sodupe, Mariona|||0000-0003-0276-0524
A thorough knowledge of the atomic structure of nanomaterials is of high importance to understand their properties. This requires developing nanoparticle models, which is not always straightforward, particularly in the case of nonpure metallic systems. The bulk cut nanoparticle model (BCN-M) computational tool generates Wulff-like models for binary materials with controlled stoichiometry automatically with none or little need for further manipulation from the user. The models are obtained exclusively by introducing the structure of the bulk material, its symmetry, the surface energies of the most representative surfaces, and information about surface termination as input data. The algorithm produces different structural model sets, and the quality of these models is evaluated using different criteria: (i) the deviation from an ideal Wulff shape, (ii) the global coordination of surface metal atoms, and (iii) the polarity of the model. BCN-M has been applied to 15 different materials, leading to a variety of models that cover the most relevant binary ionic structures and symmetries (cubic, tetragonal, hexagonal, and monoclinic). The resulting models can be used for structure analysis of ideal systems as well as their simulation. BCN-M is available as a free web platform (https://bcnm.qf.uab.cat) or as a downloadable utility, and it is expected to be an important tool for the design of future nanomaterials.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Enhanced metallophilicity in metal-carbene systems, stronger character of aurophilic interactions in solution

  • Vellé, Alba
  • Rodríguez-Santiago, Luis|||0000-0003-4983-4228
  • Sodupe, Mariona|||0000-0003-0276-0524
  • Sanz Miguel, Pablo J.|||0000-0002-8220-6031
Metallophilicity is an essential concept that builds upon the attraction between closed shell metal ions. We report on the [M2(bisNHC)2] 2+ (M = AuI, AgI; NHC = N-Heterocyclic Carbene) systems, which display almost identical features in solid state. However, in solution the Au2 cation exhibits a significant higher degree of rigidity owed to the stronger character of the aurophilic interactions. Both Au2 and Ag2 cationic constructs are able to accommodate Ag+ ions via M-M interactions, despite their inherent Coulombic repulsion. When electrostatic repulsion between host and guest is partially diminished, M-M distances are substantially shortened. Quantum chemical calculations estimate intermetallic bond orders up to 0.2. Although at the limit of (or beyond) the van der Waals radii, metallophilic interactions are responsible for their behavior in solution.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Influence of ligands and oxidation state on the reactivity of pentacoordinated iron carbenes with olefins, metathesis versus cyclopropanation

  • de Brito Sá, Égil|||0000-0003-3507-1151
  • Rodríguez-Santiago, Luis|||0000-0003-4983-4228
  • Sodupe, Mariona|||0000-0003-0276-0524
  • Solans-Monfort, Xavier|||0000-0002-2172-3895
DFT (OPBE) calculations have been used to explore how the nature of the ligands, the coordination around the metal center, and the formal iron oxidation state tunes the ground state multiplicity of L4Fe=CH2 carbenes and influences their reactivity with olefins. The study is focused on the competition between olefin metathesis and alkene cyclopropanation. We examined carbenes bearing ligands which are already used in iron complexes, as well as other in silico designed species in order to analyze borderline cases. For each complex, the three potential spin states (singlet (S = 0), triplet (S = 1), and quintet (S = 2)) of the carbene, metallacyclobutane, and metal fragment arising from cyclopropanation have been considered. Results show that the addition of σ-donating groups leads to singlet ground state iron carbenes and, although for the majority of cases of formally Fe(II) species the resulting metallacyclobutane intermediates presents a triplet ground state, the presence of a weak σ-donating ligand trans to the carbene combined with donating groups cis to the carbene can lead to Fe(II) complexes with thermodynamic properties close to those of the Ru-based Grubbs catalyst. Furthermore, the reduction of the metal center to formally Fe(0) species implies significant changes in the energetics: the carbene and metallacyclobutane species present a singlet ground state and the alkene cyclopropanation becomes unfavorable in the singlet state. However, the energy barriers that have to be overcome in the olefin metathesis reaction with our selected candidates are higher than those for cyclopropanation. For the case of the Fe(II) with weak ligands trans to the carbene, this arises from the fact that the cycloreversion trans to this ligand is not favorable. On the other hand, the Fe(0) pentacoordinated carbenes are formally 18-electron complexes and, thus, the coordination of the olefin is hindered. Therefore, these species would only be potentially active with the use of labile ligands that decoordinate in the presence of the incoming olefin. Overall, it was found that the set of ligands that leads to the appropriate thermodynamics seems to be specific for each coordination number and oxidation state.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Interaction between Ruthenium Oxide Surfaces and Water Molecules. Effect of Surface Morphology and Water Coverage

  • Heras-Domingo, Javier|||0000-0002-4322-3146
  • Sodupe, Mariona|||0000-0003-0276-0524
  • Solans-Monfort, Xavier|||0000-0002-2172-3895
RuO2 is a conducting transition metal oxide that has unique redox properties to be used as heterogeneous catalyst for oxidation reactions as well as in electrocatalysis. Furthermore, it has been reported to be an excellent catalyst for the oxygen evolution reaction, a key step for obtaining energy from water through environmentally friendly processes. In this context, a detailed knowledge of the RuO2-water interface is important for a better understanding of the electrochemical process, the water oxidation reaction and some oxidative reactions involving RuO2. Here, we use periodic boundary condition DFT (PBE-D2) calculations to analyze the influence of the surface morphology and water coverage in the adsorption energies and degree of water deprotonation. We have considered the four nonpolar ((110), (011), (100), and (001)) most relevant surfaces and three degrees of water coverage: isolated molecules, half monolayer and full monolayer. Results indicate that three effects are crucial for determining the adsorption energy and degree of deprotonation: (i) the intrinsic acidity of the unsaturated ruthenium cations and the intrinsic basicity of the O-br. centers; (ii) the presence of strong cooperative effects, already observed in the half monolayer situation of the (110) and (011) surfaces that favors 50% of deprotonation and leads to the formation of the (H3O2)(-) motif; and (iii) an increase of the surface O-br basicity by the adsorption of water molecules on Ru centers bonded to Obr groups, which is more important in the (100) and (001) surfaces.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Organocatalytic vs. Ru-based electrochemical hydrogenation of nitrobenzene in competition with the hydrogen evolution reaction

  • Moya, Alicia|||0000-0002-0328-012X
  • Creus, Jordi|||0000-0001-5555-8122
  • Romero Fernández, Nuria|||0000-0002-2704-7779
  • Aleman Lara, Jose Julian|||0000-0003-0164-1777
  • Solans-Monfort, Xavier|||0000-0002-2172-3895
  • Philippot, Karine|||0000-0002-8965-825X
  • García-Antón, Jordi|||0000-0002-2401-0401
  • Sala, Xavier|||0000-0002-7779-6313
  • Mas Balleste, Ruben|||0000-0003-1988-8700
The electrochemical reduction of organic contaminants allows their removal from water. In this contribution, the electrocatalytic hydrogenation of nitrobenzene is studied using both oxidized carbon fibres and ruthenium nanoparticles supported on unmodified carbon fibres as catalysts. The two systems produce azoxynitrobenzene as the main product, while aniline is only observed in minor quantities. Although PhNO2 hydrogenation is the favoured reaction, the hydrogen evolution reaction (HER) competes in both systems under catalytic conditions. H2 formation occurs in larger amounts when using the Ru nanoparticle based catalyst. While similar reaction outputs were observed for both catalytic systems, DFT calculations revealed some significant differences related to distinct interactions between the catalytic material and the organic substrates or products, which could pave the way for the design of new catalytic materials.