Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Molecular water oxidation catalysis by zwitterionic carboxylate bridge-functionalized bis-NHC iridium complexes

  • Puerta-Oteo, R.
  • Jiménez, M.V.
  • Pérez-Torrente, J.J.
Zwitterionic water-soluble [Cp*Ir III Cl{(MeIm) 2 CHCOO}] and [Ir I (cod){(MeIm) 2 CHCOO}] complexes featuring a carboxylate bridge-functionalized bis-N-heterocyclic carbene ligand efficiently catalyzed water oxidation using ammonium cerium(iv) nitrate (CAN) or sodium periodate as sacrificial oxidants. Excellent yields with TOF 50 numbers up to 1000 h -1 have been achieved using CAN as electron acceptor at [CAN]/[Ir] ratios higher than 700. The investigation of the reaction mechanism by UV-vis seems to evidence that both catalyst precursors are transformed into the same active molecular species resulting from the degradation of the hydrocarbon ligands which is partially supported by the similarity of the oxygen evolution profiles at moderate oxidant/catalyst ratios for both catalyst precursors and the same chemical oxidant. In addition, DLS studies provide evidence for the participation of homogeneous iridium molecular species as intermediates likely stabilized by the carboxylate-functionalized bis-NHC ligand.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Unprecedent formation of methylsilylcarbonates from iridium-catalyzed reduction of CO2 with hydrosilanes

  • Guzmán, Jefferson
  • García-Orduña, Pilar
  • Lahoz, Fernando J.
  • Fernández-Alvarez, Francisco J.
The iridium complex [Ir(µ-CF3SO3)(¿2-NSiMe2)2]2 (3) (NSiMe2 = {4-methylpyridine-2-yloxy}dimethylsilyl) has been prepared by reaction of [Ir(µ-Cl)(¿2-NSiMe2)2]2 (1) with two equivalents of AgCF3SO3. The solid structure of 3 evidenced its dinuclear nature, being a rare example of an iridium species with triflate groups acting as bridges. The 3-catalyzed reduction of CO2 with HSiMe(OSiMe3)2 affords a mixture of the corresponding silylformate and methoxysilane together with the silylcarbonate CH3OCO2SiMe(OSiMe3)2 (4a). This is the first time that the formation of silylcarbonates has been observed from the catalytic reduction of CO2 with silanes. Analogous behaviour has been observed when HSiMe2Ph and HSiMePh2 were used as reductants.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Rhodium-catalyzed formation of silylcarbamates from the reaction of secondary amines with CO2 and hydrosilanes

  • Guzmán, Jefferson
  • Torguet, Adrían
  • García-Orduña, Pilar
  • Lahoz, Fernando J.
  • Oro, Luis A.
  • Fernández-Alvarez, Francisco J.
The reaction of (4-methyl-pyridine-2-iloxy)dimethylsilane (NSiMe–H, 1) with [RhCl(coe)2]2 gives the rhodium(III) complex [Rh(Cl)(¿2-NSiMe)2] (2), which reacts with a stoichiometric amount of AgCF3CO2 to afford [Rh(¿2-CF3CO2)(¿2-NSiMe)2] (3). Complexes 2 and 3 have been fully characterized by elemental analysis and NMR spectroscopy. The solid-state structure of 3 has been confirmed by X-ray diffraction analysis. Moreover, the activity of complex 3 as catalyst for the reaction of secondary amines with CO2 (3¿bar) and hydrosilanes has been studied. The outcomes of these catalytic studies show that under these conditions complex 3 promotes the selective formation of silylcarbamates.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Reseña (Review)

Non-classical hydrosilane mediated reductions promoted by transition metal complexes

  • Iglesias, Manuel
  • Fernández-Álvarez, Francisco J.
  • Oro, Luis A.
This article reviews the most recent advances on the study of non-classical mechanisms for the reduction of organic substrates with hydrosilanes catalyzed by transition metals. A wide variety of catalytic cycles that go beyond the classical steps described for Ojima, Chalk-Harrod and modified Chalk-Harrod mechanisms, as representative examples, have been proposed in recent years. In this review, these alternative mechanistic proposals have been analyzed and classified according to the type of substrate, focusing on the reduction/hydrosilylation of carbonyl compounds (ketones and aldehydes), carbon dioxide, silylesters, amides, N-heterocycles, alkyl halides, nitriles, alkenes and alkynes. In spite of the broad diversity of non-classical reaction mechanisms hitherto reported, the catalytic cycles described for each substrate have been arranged in different categories according to their characteristics. The epigraph dedicated to the first type of substrate (carbonyl compounds) comprises most of the mechanisms described in this review for the reduction of polar bonds, which, to some extent, show a relationship to those proposed for non-polar bonds (alkenes and alkynes). Remarkable types of reaction mechanisms that will be dealt with in this work are: ionic mechanisms, ligand-assisted mechanisms, nonhydride mechanisms, NHC-Cu-H mediated mechanisms, and silylene-mediated mechanisms.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A highly efficient Ir-catalyst for the solventless dehydrogenation of formic acid: the key role of an N-heterocyclic olefin

  • Iturmendi, Amaia
  • Iglesias, Manuel
  • Munarriz, Julen
  • Polo, Víctor
  • Passarelli, Vicenzo
  • Perez-Torrente, Jesús J.
  • Oro, Luis A.
The use of formic acid as a hydrogen energy carrier has sparked the interest of the scientific community in the development of catalysts that promote its selective dehydrogenation. Most of the catalysts so far reported require the use of solvents that reduce the hydrogen density of the mixture and may even damage the fuel cell electrode materials. We present here a sturdy iridium catalyst that features a PCP ligand based on an N-heterocyclic olefin (NHO) scaffold, which is remarkably active for the dehydrogenation of neat formic acid. Related complexes that present bis-phosphine ligands without an NHO donor moiety give rise to noticeably lower activities. This highlights the importance of the role played by the NHO in the activity of the catalyst. Moreover, by reacting the IrPCP(NHO) catalyst with an excess of HCOOH and pyridine we were able to isolate a plausible reaction intermediate. These postulations have been substantiated by DFT calculations.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Influence of graphene sheet properties as supports of iridium-based N-heterocyclic carbene hybrid materials for water oxidation electrocatalysis

  • Sánchez-Page, B.
  • Pérez-Mas, A.M.
  • González-Ingelmo, M.
  • Fernández, L.
  • González, Z.
  • Jiménez, M.V.
  • Pérez-Torrente, J.J.
  • Blasco, J.
  • Subías, G.
  • Álvarez, P.
  • Granda, M.
  • Menéndez, R.
The effect of the structural properties of graphene materials on the local structure of –OH anchored Ir(I)–NHC complexes is herein investigated. For that, two partially reduced graphene oxides exhibiting different sheet properties due to an adequate selection of the crystalline characteristics of their parent graphite were used. The main differences among them were the size of Csp2 domains within their graphenic layers and the distribution of functional groups at the basal planes and edges. Anchoring of N-methylimidazolium moieties through the graphene –OH functional groups and subsequent formation of the Ir(I)–NHC complexes resulted in graphene-based hybrid materials. The structural differences of the support have an influence in the interaction of the supported iridium compounds with the graphene sheet. The oxygenated functional groups in the material with a smaller graphene sheet are closer leaving larger Csp2 domains in the graphene layer, favoring their interaction with the supported iridium atoms therefore displacing the chlorido ligand from the first coordination shell. In contrast, the hybrid material in which the distribution of the oxygenated functional groups within the basal planes of the graphenic layer is more homogeneous shows partial chlorido displacement. This fact has an influence on the electrocatalytic performance of the iridium-based hybrid materials as water oxidation catalysts (WOCs), exhibiting improved catalytic activity the catalyst having coordinated chlorido ligands.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Mechanistic insights on the functionalization of CO2 with amines and hydrosilanes catalyzed by a Zwitterionic iridium carboxylate-functionalized bis-NHC catalyst

  • Ojeda-Amador, A.I.
  • Munarriz, J.
  • Alamán-Valtierra, P.
  • Polo, V.
  • Puerta-Oteo, R.
  • Jiménez, M.V.
  • Fernández-Alvarez, F.J.
  • Pérez-Torrente, J.J.
The zwitterionic complex [Cp*IrCl{(MeIm)2CHCOO}] (1) efficiently catalyzes the selective hydrosilylation of CO2 to afford the corresponding silylformate. The best reaction performance has been achieved in acetonitrile at 348 K using HSiMe2Ph. The 1-catalyzed reaction of pyrrolidine with CO2 and HSiMe2Ph strongly depends on the CO2 pressure. At low concentration of CO2 (1 bar) formation of the corresponding silylcarbamate, by insertion of CO2 into the Si-N bond of the in situ generated silylamine was observed, while at higher pressure (3 bar) the formamide derivative was obtained as major reaction product. The unexpected formation of pyrrolidin-1-ium formate as intermediate of the reaction the 1-catalyzed of CO2 with pyrrolidine and HSiMe2Ph has been observed, and its role in the formation of 1-formylpyrrolidine rationalized. Moreover, a mechanism for the reaction of CO2 with hydrosilanes, in the presence and in the absence of amines, based on theoretical calculations has been proposed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Enhanced Chemical and Electrochemical Water Oxidation Catalytic Activity by Hybrid Carbon Nanotube-Based Iridium Catalysts Having Sulfonate-Functionalized NHC ligands

  • Nieto, J.
  • Jimenez, M.V.
  • Alvarez, P.
  • Perez-Mas, A.M.
  • Gonzalez, Z.
  • Pereira, R.
  • Sanchez-Page, B.
  • Perez-Torrente, J.J.
  • Blasco, J.
  • Subias, G.
  • Blanco, M.
  • Menendez, R.
The hybrid materials resulting from the covalent attachment of iridium NHC complexes, bearing 3-methyl-imidazol-2-ylidene and 3-(propyl-3-sulfonate)-imidazol-2-ylidene ligands to carbon nanotubes through ester functions, efficiently catalyzed water oxidation under chemical and electrochemical conditions. The hybrid catalyst featuring an NHC ligand with a propyl-sulfonate wingtip has shown an improved catalytic performance compared to that of the unfunctionalized material with TOF50 numbers up to 1140 h(-1) using ammonium cerium(IV) nitrate (CAN) as electron acceptor at [CAN]/[Ir] ratios higher than 2000. The positive effect of the presence of a polar sulfonate group in water oxidation has been also observed in related molecular catalysts with compound [Ir(cod){MeIm(CH2)(3)SO3}] being more active than [IrCl(cod){MeIm(CH2)(3)OH}]. The hybrid catalysts were less active than the molecular catalysts although their productivity has been improved by allowing successive additions of CAN or at least three recycling experiments. The electrochemical water oxidation by CNT-based hybrid materials resulted much more efficient. The positive influence of a watersoluble sulfonate wingtip in the hybrid catalysts has been also identified allowing with TOF values close to 22 000 h(-1) at 1.4 V. The local structure around iridium atoms in the heterogeneous catalysts has been determined by means of EXAFS applied before and after water oxidation reactions. The first coordination shell is similar in both fresh and postcatalytic catalysts but a slightly increase in the oxidation state of iridium atoms is observed what can be correlated to the peaks shifts in the XPS spectra for the oxidized materials.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Dinuclear Phosphine-Amido [Rh 2 (diene){µ-NH(CH 2 ) 3 PPh 2 } 2 ] Complexes as Efficient Catalyst Precursors for Phenylacetylene Polymerization

  • Angoy, Marta
  • Jiménez, M.Victoria
  • García-Orduña, Pilar
  • Oro, Luis A.
  • Vispe, Eugenio
  • Pérez-Torrente, Jesús J.
Dinuclear phosphine-amido, [Rh 2 (diene){µ-NH(CH 2 ) 3 PPh 2 } 2 ], and cationic phosphine-amino complexes, [Rh(diene){Ph 2 P(CH 2 ) 3 NHR}] + (diene = cod, nbd, tfb) and [Rh{Ph 2 P(CH 2 ) 3 NHR} 2 ] + , have been prepared from the corresponding amino-functionalized phosphines Ph 2 P(CH 2 ) 3 NHR (R = H, Me) and suitable rhodium(I) precursors. The dinuclear [Rh 2 (diene){µ-NH(CH 2 ) 3 PPh 2 } 2 ] complexes bearing p-acceptors diene ligands such as nbd or tfb exhibit a remarkable catalytic activity in phenylacetylene (PA) polymerization affording stereoregular polyphenylacetylenes with, unlike the cod precursor, unimodal molar mass distributions of very high molecular weights, M w up to ˜ 1.2 × 10 6 , and moderate polydispersity indexes. These complexes are more active than the mononuclear phosphino-anilido [Rh(diene){Ph 2 P(C 6 H 4 )NMe}] complexes, which are in turn more active than the cationic complexes [Rh(diene){Ph 2 P(CH 2 ) 3 NHMe}] + , [Rh(nbd){Ph 2 P(CH 2 ) 3 NH 2 }] + , and [Rh(nbd){Ph 2 P(C 6 H 4 )NHMe}] + bearing the same diene ligand. In contrast, complexes [Rh{Ph 2 P(CH 2 ) 3 NHR} 2 ] + (R = H, Me) without a diene ligand have been found to be inactive in PA polymerization. The excellent catalytic performance of [Rh 2 (diene){µ-NH(CH 2 ) 3 PPh 2 } 2 ] (diene = nbd, tfb) complexes is a consequence of the mode of activation of PA that likely results in the formation of unsaturated alkynyl species [Rh(diene)(CC-Ph)L] (L = PA, THF), which may be competent for PA polymerization. © 2019 American Chemical Society.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Hybrid Catalysts Comprised of Graphene Modified with Rhodium-Based N-Heterocyclic Carbenes for Alkyne Hydrosilylation

  • Sanchez-Page, B.
  • Jimenez, M.V.
  • Perez-Torrente, J.J.
  • Passarelli, V.
  • Blasco, J.
  • Subias, G.
  • Granda, M.
  • Alvarez, P.
Thermally partially reduced graphene oxide has been covalently modified with 3-methyl-4-phenyl-1, 2, 3-triazolium salts making use of the epoxy functionalities on the carbon nanomaterial. Characterization of the functionalized materials through adequate solid characterization techniques, particularly X-ray photoelectron spectroscopy (XPS), allows one to follow the stepwise building up of the triazolium fragments on the graphene oxide attached to the wall via covalent C-N linkage. The hydroxyl-triazolium-functionalized materials have been used to prepare rhodium hybrid materials containing either alkoxo or triazolylidene molecular rhodium(I) complexes depending on the protection of the hydroxyl groups present in the material. Characterization of the heterogeneous systems, especially by means of XPS and extended X-ray absorption fine structure (EXAFS) spectroscopy, has evidenced the coordination sphere of the supported rhodium(I) complexes in both rhodium hybrid materials. The graphene-oxide-supported rhodium triazolylidene hybrid catalysts show excellent activity, comparable to that of the homogeneous [RhI(cod)(Triaz)] (Triaz = 1, 4-diphenyl-3-methyl-1, 2, 3-triazol-5-ylidene) catalyst, for the hydrosilylation of terminal and internal alkynes. In addition, these catalysts have shown good selectivity to the beta-(Z) vinylsilane isomers (for the not hindered terminal substrates) or syn-additions (for the internal substrates). In contrast to the rhodium(I)-alkoxo-based hybrid material, the silyl-protected rhodium(I)-triazolylidene-based hybrid catalyst can be reused in consecutive cycles without loss of activity maintaining the selectivity. The lack of leaching of active rhodium species demonstrates the strength of the C-N covalent bond of the triazolylidene linker to the graphitic wall.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

EffectiveN-methylation of nitroarenes with methanol catalyzed by a functionalized NHC-based iridium catalyst: a green approach toN-methyl amines

  • González-Lainez, Miguel
  • Jiménez, M. Victoria
  • Passarelli, Vicenzo
  • Pérez-Torrente, Jesús J.
Compound [IrBr(CO)2(¿C-tBuImCH2PyCH2OMe)] featuring a flexible pyridine/OMe functionalized NHC ligand ¿1C coordinated efficiently catalyzes the selective N-monomethylation of nitroarenes using methanol as both the reducing agent and the C1 source. A range of functionalized nitroarenes including heterocyclic or sterically hindered derivatives have been efficiently converted to the corresponding N-monomethyl amines in good yields at low catalyst loadings using sub-stoichiometric amounts of Cs2CO3 as a base. Mechanistic investigations support a borrowing-hydrogen mechanism in which methanol acts as the hydrogen source and methylating agent. Further, the hydrogen transfer reduction of nitrobenzene to aniline under optimized reaction conditions should proceed through a direct mechanism involving nitrosobenzene and N-phenylhydroxylamine intermediates.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Carboxylate-Assisted ß-(Z) Stereoselective Hydrosilylation of Terminal Alkynes Catalyzed by a Zwitterionic Bis-NHC Rhodium(III) Complex

  • Puerta-Oteo, R.
  • Munarriz, J.
  • Polo, V.
  • Jiménez, M.V.
  • Pérez-Torrente, J.J.
The zwitterionic compound [Cp*RhCl{(MeIm)2CHCOO}] is an efficient catalyst for the hydrosilylation of terminal alkynes with excellent regio- and stereoselectivity toward the less thermodynamically stable ß-(Z)-vinylsilane isomer under mild reaction conditions. A broad range of linear 1-alkynes, cycloalkyl acetylenes, and aromatic alkynes undergo the hydrosilylation with HSiMe2Ph to afford the corresponding ß-(Z)-vinylsilanes in quantitative yields in short reaction times. The reaction of aliphatic alkynes with HSiEt3 is slower, resulting in a slight decrease of selectivity toward the ß-(Z)-vinylsilane product, which is still greater than 90%. However, a significant selectivity decrease is observed in the hydrosilylation of aromatic alkynes because of the ß-(Z) ¿ ß-(E) vinylsilane isomerization. Moreover, the hydrosilylation of bulky alkynes, such as t-Bu-CCH or Et3SiCCH, is unselective. Experimental evidence suggests that the carboxylate function plays a key role in the reaction mechanism, which has been validated by means of density functional theory calculations, as well as by mass spectrometry and labeling studies. On the basis of previous results, we propose an ionic outer-sphere mechanism pathway in which the carboxylate fragment acts as a silyl carrier. Namely, the hydrosilylation mechanism entails the heterolytic activation of the hydrosilane assisted by the carboxylate function to give the hydrido intermediate [Cp*RhH{(MeIm)2CHCOO-SiR3}]+. The transference of the silylium moiety from the carboxylate to the alkyne results in the formation of a flat ß-silyl carbocation intermediate that undergoes a hydride transfer from the Rh(III) center to generate the vinylsilane product. The outstanding ß-(Z) selectivity results from the minimization of the steric interaction between the silyl moiety and the ligand system in the hydride transfer transition state. Copyright
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Synthesis and reactivity at the Ir-MeTpm platform: from k1-N coordination to k3-N-based organometallic chemistry

  • Fernández-Alvarez, Francisco J.
  • Polo, Víctor
  • García-Orduña, Pilar
  • Lahoz, Fernando J.
  • Pérez-Torrente, Jesús J.
  • Oro, Luis A.
  • Lalrempuia, Ralte
Reaction of [Ir(µ-Cl)(COE)2]2 (COE = cis-cyclooctene) with tris(3, 5-dimethylpyrazol-1-yl)methane (MeTpm) affords [IrCl(¿1-N-MeTpm)(COD)] (1) (COD = 1, 5-cyclooctadiene). The formation of 1 implies the transfer dehydrogenation of a COE ligand to give COD and COA (cyclooctane). A mechanistic proposal based on DFT calculations that explains this iridium promoted process has been disclosed. Additionally, reactivity studies have allowed the preparation and characterization, including determination of the molecular structures of a number of iridium complexes with the MeTpm ligand in ¿1, ¿2 or ¿3-N coordination modes. Moreover, the first example of an Ir-cyclooctyl complex featuring hydride and carbonyl ligands, whose solid state structure has been determined by X-ray diffraction methods, is reported.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Enhanced metallophilicity in metal-carbene systems: stronger character of aurophilic interactions in solution

  • Vellé, Alba
  • Rodríguez-Santiago, Luis
  • Sodupe, Mariona
  • Sanz Miguel, Pablo J.
Metallophilicity is an essential concept that builds upon the attraction between closed shell metal ions. We report on the [M-2(bisNHC)(2)](2+) (M=Au-I, Ag-I; NHC=N-heterocyclic carbene) systems, which display almost identical features in the solid state. However, in solution the Au-2 cation exhibits a significantly higher degree of rigidity owed to the stronger character of the aurophilic interactions. Both Au-2 and Ag-2 cationic constructs are able to accommodate Ag+ ions via M-M interactions, despite their inherent Coulombic repulsion. When electrostatic repulsion between host and guest is partially diminished, M-M distances are substantially shortened. Quantum chemical calculations estimate intermetallic bond orders up to 0.2. Although at the limit of (or beyond) the van der Waals radii, metallophilic interactions are responsible for their behavior in solution.