Pasar al contenido principal

ARQUITECTURAS METAL-LIGANDO CON APLICACION AL DISEÑO DE CATALIZADORES HOMOGENEOS E HIBRIDOS

CTQ2016-75884-P

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 42
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design of highly selective alkyne hydrothiolation RhI-NHC catalysts: Carbonyl-triggered nonoxidative mechanism

  • Palacios, Laura
  • Meheut, Yoann
  • Galiana-Cameo, María
  • Artigas, María José
  • Giuseppe, Andrea di
  • Lahoz, Fernando J.
  • Polo, Víctor
  • Castarlenas, Ricardo
  • Pérez-Torrente, Jesús J.
  • Oro, Luis A.
New RhI-IPr (IPr = 1,3-bis(2,6-diisopropylphenyl)imidazolin-2-carbene) complexes bearing an N,O-pyridine-2-methanolato (N-O) bidentate ligand have been prepared. The carbonyl complex Rh(N-O)(IPr)(CO) efficiently catalyzes the hydrothiolation of a range of alkynes with high selectivity to α-vinyl sulfides. Reactivity studies and DFT calculations have revealed a new nonoxidative catalytic pathway, passing through RhI catalytic intermediates, which is driven by the interplay between the pyridine-2-methanolato and carbonyl ligands. The basic alkoxo ligand promotes the deprotonation of the thiol to generate the RhI active species, whereas the π-acceptor character of the carbonyl ligand hinders the oxidative addition process. In addition, the stereochemistry of the key thiolate-π-alkyne intermediate, which is determined by the electronic preference of the carbonyl ligand to coordinate cis to IPr, facilitates the rate-limiting alkyne thiometalation step., Financial support from the Spanish Ministerio de Economía y Competitividad (MINECO/FEDER) under the Projects CTQ2013-42532-P and CTQ2016-75884-P, the Diputación General de Aragón (E07) and CONSOLIDER INGENIO-2010, under the Project MULTICAT (CSD2009-00050) are gratefully acknowledged. A.D.G. thanks the Spanish Ministerio de Economia y Competitividad (MINECO) for the post- doctoral grant Juan de la Cierva - Incorporacion 2015 (IJCI-2015-27029)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pentacoordinated rhodium(I) complexes supported by coumarin-functionalized N-heterocyclic carbene ligands

  • Karataş, Mert Olgun
  • Giuseppe, Andrea di
  • Passarelli, Vincenzo
  • Alıcı, Bülent
  • Pérez-Torrente, Jesús J.
  • Oro, Luis A.
  • Özdemir, Ismail
  • Castarlenas, Ricardo
New coumarin-tethered benzimidazolium (BzICouRHCl) and imidazolium (ICouRHCl) salts have been prepared as precursors for coumarin–NHC rhodium(I) complexes RhCl(NHC)(cod). Trigonal bypiramidal pentacoordinated bis-coumarin–NHC rhodium(I) species, RhCl(NHC)2, can be obtained by heating rhodium-cod derivatives in the presence of coumarin–azolium salts and a base. These unusual species are stabilized by coordination of the unsaturated bond of both coumarin moieties by the same enantioface. The allyl substituent on doubly functionalized NHC competes for coordination with coumarin wingtips. DFT calculations upon coordination of the olefin moieties support the experimental results., Financial support from the Spanish Ministerio de Economía y Competitividad (MINECO/FEDER) under the Projects CTQ2013-42532-P and CTQ2016-75884-P, the CSIC under the Project Proyectos Intramurales Especiales (201680I011), and the Diputación General de Aragón (E07) are gratefully acknowledged. M.O.K. thanks Scientific and Technological Research Council of Turkey (TUBITAK). A.D.G. thanks the Spanish Ministerio de Economía y Competitividad (MINECO) for the postdoctoral grant Juan de la Cierva - Incorporación 2015 (IJCI-2015-27029)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanistic studies on the N -alkylation of amines with alcohols catalysed by iridium(i) complexes with functionalised N-heterocyclic carbene ligands

  • Jiménez, M. Victoria
  • Fernández-Tornos, Javier
  • González-Lainez, Miguel
  • Sánchez-Page, Beatriz
  • Modrego, Francisco J.
  • Oro, Luis A.
  • Pérez-Torrente, Jesús J.
Iridium(i) cyclooctadiene complexes featuring O- and N-donor functionalised NHC ligands efficiently catalyse the C-N coupling of amines with alcohols through a borrowing hydrogen mechanism. These catalysts have been applied for the N-alkylation of several aromatic and aliphatic primary amines with a range of alcohols including benzyl alcohol derivatives, straight-chain primary alcohols and secondary alcohols. The cationic complex [Ir(NCCH)(cod){MeIm(2-methoxybenzyl)}] (cod = 1,5-cyclooctadiene, MeIm = 3-methylimidazol-2-ylidene) having a rigid O-donor wingtip exhibits the best catalytic performance for the N-alkylation of aniline with benzyl alcohol giving a quantitative conversion to N-benzylaniline in 3 h. Experimental and theoretical studies at the DFT level on the N-alkylation of aniline with benzyl alcohol catalysed by the model compound [IrCl(cod)(IMe)] (IMe = 1,3-dimethyl-imidazol-2-ylidene) support the participation of the iridium catalyst not only in the alcohol dehydrogenation and imine hydrogenation steps but also in the key step leading to the formation of the new C-N bond. Nucleophilic attack of an iridium-amido species generated in basic medium on the electrophilic aldehyde results in a hemiaminolate intermediate species from which the hemiaminal is released by alcoholysis. The free hemiaminal dehydrates to give the corresponding intermediate imine product that is hydrogenated by the iridium catalyst to the N-alkylated amine product. The iridium(i) complexes featuring functionalised NHC ligands are more active than [IrCl(cod)(IMe)] which highlights the positive influence of the functional group on the N-alkylation catalytic activity., Financial support from the Spanish Ministry of Economy and Competitiveness (MINECO/FEDER, Projects CTQ2013-42532-P and CTQ2016-75884-P) and the Diputación General de Aragón (DGA/FSE-E07) is gratefully acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A highly efficient Ir-catalyst for the solventless dehydrogenation of formic acid: the key role of an N-heterocyclic olefin

  • Iturmendi, Amaia
  • Iglesias, Manuel
  • Munárriz, Julen
  • Polo, Víctor
  • Passarelli, Vincenzo
  • Pérez-Torrente, Jesús J.
  • Oro, Luis A.
A sturdy iridium complex that features a PCP ligand based on an N-heterocyclic olefin shows remarkable activity for the solventless dehydrogenation of formic acid. Reactivity studies highlight the importance of NHO in the activity of the catalyst. A plausible intermediate has been isolated and the mechanism was substantiated by DFT calculations., This work was supported by the Spanish Ministry of Education, Culture and Sports (MECD) (project CTQ2016-75884-P, “Ramón y Cajal” program RYC2016-20864 (M. I.) and FPU14/06003 (J. M.)) and the DGA/E42_17R., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impact of protic ligands in the Ir-catalyzed dehydrogenation of formic acid in water

  • Iturmendi, Amaia
  • Rubio-Pérez, Laura
  • Pérez-Torrente, Jesús J.
  • Iglesias, Manuel
  • Oro, Luis A.
New Ir–IPr complexes featuring a variety of chelate ligands, some of them featuring NH moieties, were synthesized. These complexes proved to be efficient catalysts for the dehydrogenation of formic acid in DMF and H2O. The dehydrogenation rates were dependent on the nature of the ligands that accompany IPr in the coordination sphere of the metal. In fact, complexes that contain protic ligands, namely, [Ir(8-aminoquinoline)(H)2(IPr)(PPhMe2)]BF4 and [Ir(CH3CN)(2-phenylimidazole)(H)(IPr)(PPhMe2)]BF4, showed the best activities in H2O. The former, which presents an NH2 group bound to the Ir center, is the most active (in H2O) of the catalysts presented in this work and can be recycled up to 10 times without an apparent loss of activity. This behavior may be attributed to the robust ligand system and, likely, to its ability to establish outer-sphere interactions. This postulation is supported by the fact that complex [Ir(8-dimethylaminoquinoline)(H)2(IPr)(PPhMe2)]BF4, which features an −NMe2 instead of an −NH2 donor group, gives rise to a strikingly lower catalytic activity., This work was supported by the Spanish Ministry of Economy and Competitiveness (project CTQ2016-75884-P and “Ramón y Cajal” program (M.I.)) and the DGA/FSE-E07., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Vinylidene-based polymers by Rh(i)-NHC catalyzed thiol-yne click polymerization: Synthesis, characterization and post-polymerization modification

  • Funes-Hernando, Daniel
  • Hermosilla, Pablo
  • Vispe, Eugenio
  • Giuseppe, Andrea di
  • Castarlenas, Ricardo
  • Oro, Luis A.
  • Pérez-Torrente, Jesús J.
Complex RhCl(IPr)(pyridine)(η2-coe) (IPr = 1,3-bis-(2,6-diisopropylphenyl)imidazol-2-ylidene) efficiently catalyzes the polyhydrothiolation of aromatic diynes with aliphatic dithiols to give vinylidene-based polymers (vinylidene content of 80%) with high molecular weights (Mw up to 199 000). These polymers have been shown to be chemically modifiable through hydrogenation and chemical oxidation processes., This research was supported by the Ministerio de Economía y Competitividad (MINECO/FEDER) under the Project CTQ2016-75884-P and the Diputación General de Aragón (DGA/FSE-E07). A. D. G. also thanks MINECO for the postdoctoral grant Juan de la Cierva-Incorporación 2015 (IJCI-2015-27029)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Zwitterionic rhodium and iridium complexes based on a carboxylate bridge-functionalized bis-N-heterocyclic carbene ligand: Synthesis, structure, dynamic behavior, and reactivity

  • Puerta-Oteo, Raquel
  • Jiménez, M. Victoria
  • Lahoz, Fernando J.
  • Modrego, Francisco J.
  • Passarelli, Vincenzo
  • Pérez-Torrente, Jesús J.
A series of water-soluble zwitterionic complexes featuring a carboxylate bridge-functionalized bis-N-heterocyclic carbene ligand of formula [Cp MCl{(MeIm)CHCOO}] and [M(diene){(MeIm)CHCOO}] (Cp∗ = 1,2,3,4,5-pentamethylcyclopentadienyl; M = Rh, Ir; MeIm = 3-methylimidazol-2-yliden-1-yl; diene = 1,5-cyclooctadiene (cod), norbornadiene (nbd)) were prepared from the salt [(MeImH)CHCOO]Br and suitable metal precursor. The solid-state structure of both types of complexes shows a boat-shaped six-membered metallacycle derived of the κC,C′ coordination mode of the bis-NHC ligand. The uncoordinated carboxylate fragment is found at the bowsprit position in the Cp M complexes, whereas in the M(diene) complexes it is at the flagpole position of the metallacycle. The complexes [Rh(diene){(MeIm)CHCOO}] (diene = cod, nbd) exist as two conformational isomers in dichloromethane, bowsprit and flagpole, that interconvert through the boat-to-boat inversion of the metallacycle. An inversion barrier of ∼17 kcal·mol was determined by two-dimensional exchange spectroscopy NMR measurements for [Rh(cod){(MeIm)CHCOO}]. Reaction of zwitterionic Cp M complexes with methyl triflate or tetrafluoroboric acid affords the cationic complexes [Cp MCl{(MeIm)CHCOOMe}] or [Cp MCl{(MeIm)CHCOOH}] (M = Rh, Ir) featuring carboxy and methoxycarbonyl functionalized methylene-bridged bis-NHC ligands, respectively. Similarly, complexes [M(diene){(MeIm)CHCOOMe}] (M = Rh, Ir) were prepared by alkylation of the corresponding zwitterionic M(diene) complexes with methyl triflate. In contrast, reaction of [Ir(cod){(MeIm)CHCOO}] with HBF·EtO (Et = ethyl), CHOTf, CHI, or I gives cationic iridium(III) octahedral complexes [IrX(cod){(MeIm)CHCOO}] (X = H, Me, or I) featuring a tripodal coordination mode of the carboxylate bridge-functionalized bis-NHC ligand. The switch from κC,C′ to κC,C′,O coordination of the bis-NHC ligand accompanying the oxidative addition prevents the coordination of the anions eventually formed in the process that remain as counterions., Financial support from the Spanish Ministry of Economy and Competitiveness (MINECO/FEDER) under the Project CTQ2016-75884-P and the Diputación General de Aragón (DGA/FSE-E07) is gratefully acknowledged. R.P.-O. also thanks MINECO for a predoctoral fellowship (BES-2011-045364)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Molecular water oxidation catalysis by zwitterionic carboxylate bridge-functionalized bis-NHC iridium complexes

  • Puerta-Oteo, Raquel
  • Jiménez, M. Victoria
  • Pérez-Torrente, Jesús J.
Zwitterionic water-soluble [Cp*IrIIICl{(MeIm)2CHCOO}] and [IrI(cod){(MeIm)2CHCOO}] complexes featuring a carboxylate bridge-functionalized bis-N-heterocyclic carbene ligand efficiently catalyzed water oxidation using ammonium cerium(IV) nitrate (CAN) or sodium periodate as sacrificial oxidants. Excellent yields with TOF50 numbers up to 1000 h−1 have been achieved using CAN as electron acceptor at [CAN]/[Ir] ratios higher than 700. The investigation of the reaction mechanism by UV-vis seems to evidence that both catalyst precursors are transformed into the same active molecular species resulting from the degradation of the hydrocarbon ligands which is partially supported by the similarity of the oxygen evolution profiles at moderate oxidant/catalyst ratios for both catalyst precursors and the same chemical oxidant. In addition, DLS studies provide evidence for the participation of homogeneous iridium molecular species as intermediates likely stabilized by the carboxylate-functionalized bis-NHC ligand., Financial support from the Spanish Ministry of Economy and Competitiveness (MINECO/FEDER, Projects CTQ2013-42532-P and CTQ2016-75884-P), and Diputación General de Aragón (DGA/FSE E42_17R) is gratefully acknowledged. R. P.-O. thanks MINECO for a predoctoral fellowship (BES-2011-045364)., We acknowledge support of the publication fee by the CSIC Open Access Support Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rhodium–N-heterocyclic carbene catalyzed hydroalkenylation reactions with 2-vinylpyridine and 2-vinylpyrazine: Preparation of nitrogen-bridgehead heterocycles

  • Azpíroz, Ramón
  • Giuseppe, Andrea di
  • Passarelli, Vincenzo
  • Pérez-Torrente, Jesús J.
  • Oro, Luis A.
  • Castarlenas, Ricardo
Dinuclear rhodium–NHC complexes of formula [Rh(μ-Cl)(NHC)(η2-coe)]2 react with 2-vinylpyridine to yield the chelate compounds RhCl(NHC)(κ-N,η2-CH2═CHC5H4N) {NHC = IPr, 1,3-bis(2,6-diisopropylphenyl)imidazolin-2-carbene; IMes, 1,3-bis(2,4,6-trimethylphenyl)imidazolin-2-carbene}. The strained metallacycle can be opened by substitution of the pyridine ring by the small electron-rich PEt3 to give RhCl(IPr){η2-CH2═CH(C5H4N)}(PEt3), whereas π ligands such as olefins or alkynes undergo C–C coupling to yield 2-(butenyl)pyridine or 2-(butadienyl)pyridine RhCl(NHC){κ-N,η2-CH(R)═CH(C5H4N)} complexes by formal hydroalkenylation of the unsaturated bond by vinylpyridine. Reaction of the dinuclear precursors with 2-vinylpyrazine in the presence of pyridine affords the η2 derivative RhCl(IPr){η2-CH2═CH(C4H3N2)}(py). Compound RhCl(IMes)(κ-N,η2-CH2═CHC5H4N) is an efficient catalyst for the hydroalkenylation of a range of alkenes and alkynes with 2-vinylpyridine and 2-vinylpyrazine. The butadienyl-heterocycle derivatives resulting from coupling of 2-vinylazines with alkynes undergo a thermal 6π-electrocyclization to yield 4H-quinolizines or 6H-pyrido[1,2-a]pyrazines depending on the nature and position of the substituent of the butadienyl fragment. DFT calculations reveal that fused N-bridgehead heterocycles are more stable than opened butadienylazine derivatives, in spite of the dearomatization of the azine moiety., Financial support from the Spanish Ministerio de Economía y Competitividad (MINECO/FEDER) under the Projects CTQ2013-42532-P and CTQ2016-75884-P, the CSIC under the Project Proyectos Intramurales Especiales (201680I011), and the Diputación General de Aragón (DGA/FSE-E07) are gratefully acknowledged. A.D.G. thanks the Spanish Ministerio de Economía y Competitividad (MINECO) for the postdoctoral grant Juan de la Cierva - Incorporación 2015 (IJCI-2015-27029)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Experimental and theoretical mechanistic investigation on the catalytic CO2 hydrogenation to formate by a carboxylate- functionalized bis(N-heterocyclic carbene) zwitterionic iridium(I) compound

  • Puerta-Oteo, Raquel
  • Hölscher, Markus
  • Jiménez, M. Victoria
  • Leitner, Walter
  • Passarelli, Vincenzo
  • Pérez-Torrente, Jesús J.
The bis-imidazolium salt, 1,1-bis(N-methylimidazolium) acetate bromide, is a convenient precursor for the synthesis of zwitterionic iridium(I) [Ir(cod){(MeIm)2CHCOO}] and cationic iridium(III) [IrH(cod){(MeIm)2CHCOO}]+ compounds (MeIm = 3-methylimidazol-2-yliden-1-yl) having a carboxylate-functionalized bis(NHC) ligand. The [Ir(cod){(MeIm)2CHCOO}] compound catalyzes the hydrogenation of CO2 to formate in water using NEt3 as base, reaching turnover numbers of approximately 1500. Reactivity studies have shown that activation of the catalyst precursor involves the reaction with H2 in a multistep process that under catalytic conditions results in the formation of a dihydrido iridium(III) octahedral [IrH2(H2O){(MeIm)2CHCOO}] species stabilized by the κ3-C,C′,O coordination of the ligand. DFT studies on the mechanism were carried out to elucidate two possible roles of the base. In the first one, NEt3 neutralizes only the produced formic acid, whereas in the second it assists the proton transfer in heterolytic cleavage of the H2 molecule. Although this base-involved mechanism is more favorable in that it exhibits a lower energy span for the overall reaction, the energy barrier obtained from kinetic experiments suggests that both mechanisms could be operative under the experimental reaction conditions., Financial support from the Ministerio de Economía y Competitividad (MINECO/FEDER) of Spain (Projects CTQ2013-42532-P and CTQ2016-75884-P) and Diputación General de Aragón (DGA/FSE E07) is gratefully acknowl-edged. R. P-O. acknowledges her fellowship from MINECO (BES-2011-045364, EEBB-I-14-08939 and EEBB-I-15-10125). Additional support from the DFG (Cluster of Excellence “Tailor-made Fuels from Biomass”, which is funded by the Excellence initiative by the German Federal and State Governments to promote science and research at German universities) is gratefully acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanistic investigation on the polymerization of phenylacetylene by 2-diphenylphosphinopyridine rhodium(I) catalysts: Understanding the role of the cocatalyst and alkynyl intermediates

  • Angoy, Marta
  • Jiménez, M. Victoria
  • Modrego, Francisco J.
  • Oro, Luis A.
  • Passarelli, Vincenzo
  • Pérez-Torrente, Jesús J.
The mono- and dinuclear rhodium(I) complexes featuring 2-(diphenylphosphino)pyridine ligands, [Rh(cod)(Ph2PPy)]+ and [Rh(nbd)(μ-Ph2PPy)]22+ (cod = 1,5-cyclooctadiene, nbd = 2,5-norbornadiene), have been prepared in order to be evaluated as phenylacetylene (PA) polymerization catalysts. In contrast with compound [Rh(nbd){Ph2P(CH2)2Py}]+, featuring a 2-(2-(diphenylphosphino)ethyl)pyridine ligand, that showed a moderate catalytic activity, both [Rh(diene)(Ph2PPy)]nn+ (n = 1, cod; n = 2, nbd) complexes showed no catalytic activity due to the formation of unusual dinuclear species [Rh2(diene)2(μ-Ph2PPy)(μ-C≡C-R)]+, supported by a Ph2PPy bridging ligand and an alkynyl ligand coordinated in a μ-η1:η2 fashion, which are inactive in PA polymerization. However, compounds [Rh(diene)(Ph2PPy)]nn+ efficiently polymerize PA in the presence of a cocatalyst as iPrNH2 affording highly stereoregular poly(phenylacetylene) (PPA) of Mw = 3.42 × 105 (cod) and 2.02 × 105 (nbd) with polydispersities of 1.39 and initiation efficiencies of 4–7%. NMR studies on the polymerization reaction have allowed identification of the alkynyl species [Rh(C≡CPh)(cod)(Ph2PPy)] as the likely initiating species involved in the generation of the rhodium-vinyl species responsible for the propagation step. The iPrNH2 cocatalyst is possibly involved in the efficient proton transfer from the coordinated PA to iPrNH2 that allows for a significant concentration of the key initiating species [Rh(C≡CPh)(cod)(Ph2PPy)]. The distinct behavior of compounds [Rh(diene)(Ph2PPy)]nn+ as PA polymerization catalysts is a consequence of the binucleating ability of the Ph2PPy ligand in combination with the low basicity of the pyridine fragment which allows for the stabilization of the inactive alkynyl-bridge dinuclear species., Financial support from the Spanish Ministry of Economy and Competitiveness (MINECO/FEDER) under the Project CTQ2016-75884-P and the Diputación General de Aragón (DGA/FSE-E07) is gratefully acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanistic insights into the tropo-inversion of the biphenyl moiety in chiral bis-amido phosphites and in their palladium(II) complexes

  • Passera, Alessandro
  • Iuliano, Anna
  • Pérez-Torrente, Jesús J.
  • Passarelli, Vincenzo
Chiral bis-amido phosphites L1 and L2 containing a diaminobiphenyl unit and a chiral alkoxy group derived from either (−)-menthol or 3-acetoxy deoxycholic methyl ester have been synthesised. Both L1 and L2 react with PdCl2(NCPh)2 affording di- or mononuclear derivatives with formula trans-[Pd(μ-Cl)Cl(L)]2 (1a, L = L1; 1b, L = L2) or trans-PdCl2(L)2 (2a, L = L1; 2b, L = L2) depending on the Pd : L molar ratio. The crystal structure of (M,P)-1a confirms the trans arrangement of the ligand L1 and shows an unusual puckering of the Pd2(μ-Cl)2 core (θ 46°). Both the ligands L1 and L2 and their complexes (1 and 2) are fluxional in solution as a consequence of the tropo-inversion of the diaminobiphenyl unit. For L1, L2, 1a and 2a a combined study including variable temperature 31P{1H} NMR spectroscopy and line shape analysis, Eyring plots and DFT calculations have shed light on the mechanism of the tropo-inversion., Financial support from the Ministerio de Economía y Competitividad (MINECO/FEDER) of Spain (Projects CTQ2013-42532-P and CTQ2016-75884-P), Diputación General de Aragón (DGA/FSE E07) and the University of Pisa is gratefully acknowledged. A. P. acknowledges financial support from the ERASMUS+ programme., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pd(II) complexes of monodentate deoxycholic acid derived binaphthyl diamido phosphites as chiral catalysts in the asymmetric Suzuki-Miyaura cross-coupling

  • Iannucci, Grazia
  • Passarelli, Vincenzo
  • Passera, Alessandro
  • Iuliano, Anna
Chiral binaphthyl diamidophosphites derived from deoxycholic acid were synthesized and used as ligands for the preparation of mononuclear Pd(II) complexes, which were employed as catalysts in the asymmetric Suzuki-Miyaura cross-coupling of arylboronic acids with aryl bromides. Among the different reaction parameters, the substrate concentration emerged as being crucial for the outcome of the reaction: the reaction was faster in a concentrated reaction mixture, and could be performed at 0 °C, where the reaction promoted by the Pd-complexes was more enantioselective affording cross-coupling products with ee up to 70%., This work was supported by University of Pisa. Financial support from the Ministerio de Economía y Competitividad (MINECO/FEDER) of Spain (Projects CTQ2013-42532-P and CTQ2016-75884-P) and Diputación General de Aragón (DGA/FSE E07) is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Improving the catalytic activity of hybrid carbon nanotube/iridium carbene complexes towards water oxidation by the introduction of sulphonate ligands

  • Pérez Mas, Ana Matilde
  • González Arias, Zoraida
  • Nieto, Jorge
  • Jiménez, M. Victoria
  • Álvarez Rodríguez, Patricia
  • Menéndez López, Rosa María
Trabajo presentado a la Reunión de la Sociedad Española de Catálisis (SECAT): "Catálisis para un mundo más sostenible", celebrada en Oviedo del 26 al 28 de junio de 2017., One of the most important challenges to guarantee a sustainable energy supply using solar energy is to develop the artificial photosynthesis. This process includes the elimination of four electrons and four protons of two water molecules with the concomitant cleavage of four 0-H bonds and formation of a double bond 0=0. Several iridium complexes were found to be suitable materials in the catalytic oxidation of water (WOC). In this regard, we have recently reported the covalent linkage of iridium(l) NHC carbene complexes to some acetylimidazolium functionalized carbon nanotubes (CNTs) to prepare robust active catalysts in hydrogen transfer reactions. Bearing that in mind we synthetized new CNT-supported lr(l) NHC carbene complexes containing water soluble ligands and tested their electrocatalytic activity towards WOC., Authors thank Principado de Asturias-PCTI [Severo Ochoa pre-doctoral grant (A.M.P.M.)] and research project: Fondo Europeo de desarrollo Regional UE (GRUPIN 14-118)], MINECO/FEDER (CTQ2013·42532-P and CTQ2016-75884-P) and Diputación General de Aragón (DGA/FSE E07) for their financia! support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hybrid catalysts comprised of graphene modified with rhodium-based N-heterocyclic carbenes for alkyne hydrosilylation

  • Sánchez-Page, Beatriz
  • Jiménez, M. Victoria
  • Pérez-Torrente, Jesús J.
  • Passarelli, Vincenzo
  • Blasco, Javier
  • Subías, Gloria
  • Granda Ferreira, Marcos
  • Álvarez Rodríguez, Patricia
This document is the Accepted Manuscript version of a Published Work that appeared in final form in ACS Applied Nano Materials, copyright © American Chemical Society after peer review and technical editing by the publisher. To access the final edited and published work see https://doi.org/10.1021/acsanm.9b02398, Thermally partially reduced graphene oxide has been covalently modified with 3-methyl-4-phenyl-1,2,3-triazolium salts making use of the epoxy functionalities on the carbon nanomaterial. Characterization of the functionalized materials through adequate solid characterization techniques, particularly X-ray photoelectron spectroscopy (XPS), allows one to follow the stepwise building up of the triazolium fragments on the graphene oxide attached to the wall via covalent C–N linkage. The hydroxyl-triazolium-functionalized materials have been used to prepare rhodium hybrid materials containing either alkoxo or triazolylidene molecular rhodium(I) complexes depending on the protection of the hydroxyl groups present in the material. Characterization of the heterogeneous systems, especially by means of XPS and extended X-ray absorption fine structure (EXAFS) spectroscopy, has evidenced the coordination sphere of the supported rhodium(I) complexes in both rhodium hybrid materials. The graphene-oxide-supported rhodium–triazolylidene hybrid catalysts show excellent activity, comparable to that of the homogeneous [RhI(cod)(Triaz)] (Triaz = 1,4-diphenyl-3-methyl-1,2,3-triazol-5-ylidene) catalyst, for the hydrosilylation of terminal and internal alkynes. In addition, these catalysts have shown good selectivity to the β-(Z) vinylsilane isomers (for the not hindered terminal substrates) or syn-additions (for the internal substrates). In contrast to the rhodium(I)–alkoxo-based hybrid material, the silyl-protected rhodium(I)–triazolylidene-based hybrid catalyst can be reused in consecutive cycles without loss of activity maintaining the selectivity. The lack of leaching of active rhodium species demonstrates the strength of the C–N covalent bond of the triazolylidene linker to the graphitic wall., The authors express their appreciation for the financial support from MICINN/FEDER projects CTQ2016-75884-P and RTI2018-098537-B-C22, and the Regional Governments of Aragón/FEDER 2014-2020 “Building Europe from Aragón” (groups E42_17R and E12_17R) and Principado de Asturias (FEDER: IDI/2018/000121) are gratefully acknowledged. The authors also acknowledge ALBA synchrotron for granting beamtime and the collaboration of the CLAESS beamline staff., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced chemical and electrochemical water oxidation catalytic activity by hybrid carbon nanotube-based iridium catalysts having sulfonate-functionalized NHC ligands

  • Nieto, Jorge
  • Jiménez, M. Victoria
  • Álvarez Rodríguez, Patricia
  • Pérez Mas, Ana Matilde
  • González Arias, Zoraida
  • Pereira, Rafael
  • Sánchez-Page, Beatriz
  • Pérez-Torrente, Jesús J.
  • Blasco, Javier
  • Subías, Gloria
  • Blanco, Matías
  • Menéndez López, Rosa María
This document is the Accepted Manuscript version of a Published Work that appeared in final form in ACS Applied Energy Materials, copyright © American Chemical Society after peer review and technical editing by the publisher. To access the final edited and published work see [insert ACS Articles on Request author-directed link to Published Work, see https://doi.org/10.1021/acsaem.9b00137, The hybrid materials resulting from the covalent attachment of iridium NHC complexes, bearing 3-methyl-imidazol-2-ylidene and 3-(propyl-3-sulfonate)-imidazol-2-ylidene ligands to carbon nanotubes through ester functions, efficiently catalyzed water oxidation under chemical and electrochemical conditions. The hybrid catalyst featuring an NHC ligand with a propyl-sulfonate wingtip has shown an improved catalytic performance compared to that of the unfunctionalized material with TOF50 numbers up to 1140 h–1 using ammonium cerium(IV) nitrate (CAN) as electron acceptor at [CAN]/[Ir] ratios higher than 2000. The positive effect of the presence of a polar sulfonate group in water oxidation has been also observed in related molecular catalysts with compound [Ir(cod){MeIm(CH2)3SO3}] being more active than [IrCl(cod){MeIm(CH2)3OH}]. The hybrid catalysts were less active than the molecular catalysts although their productivity has been improved by allowing successive additions of CAN or at least three recycling experiments. The electrochemical water oxidation by CNT-based hybrid materials resulted much more efficient. The positive influence of a water-soluble sulfonate wingtip in the hybrid catalysts has been also identified allowing with TOF values close to 22 000 h–1 at 1.4 V. The local structure around iridium atoms in the heterogeneous catalysts has been determined by means of EXAFS applied before and after water oxidation reactions. The first coordination shell is similar in both fresh and postcatalytic catalysts but a slightly increase in the oxidation state of iridium atoms is observed what can be correlated to the peaks shifts in the XPS spectra for the oxidized materials., Financial support from the Spanish Ministry of Economy and Competitiveness (MINECO/FEDER, Projects CTQ2013-42532-P and CTQ2016-75884-P), Diputación General de Aragón (DGA/FSE E42_17R), and Principado de Asturias (FEDER: IDI/2018/000121) are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanistic insights on the functionalization of CO2 with amines and hydrosilanes catalyzed by a zwitterionic iridium carboxylate-functionalized bis-NHC catalyst

  • Ojeda-Amador, Ana I.
  • Munárriz, Julen
  • Alamán-Valtierra, Pablo
  • Polo, Víctor
  • Puerta-Oteo, Raquel
  • Jiménez, M. Victoria
  • Fernández-Álvarez, Francisco J.
  • Pérez-Torrente, Jesús J.
The zwitterionic complex [Cp*IrCl{(MeIm)CHCOO}] (1) efficiently catalyzes the selective hydrosilylation of CO to afford the corresponding silylformate. The best reaction performance has been achieved in acetonitrile at 348 K using HSiMePh. The 1-catalyzed reaction of pyrrolidine with CO and HSiMePh strongly depends on the CO pressure. At low concentration of CO (1 bar) formation of the corresponding silylcarbamate, by insertion of CO into the Si−N bond of the in situ generated silylamine was observed, while at higher pressure (3 bar) the formamide derivative was obtained as major reaction product. The unexpected formation of pyrrolidin-1-ium formate as intermediate of the reaction the 1-catalyzed of CO with pyrrolidine and HSiMePh has been observed, and its role in the formation of 1-formylpyrrolidine rationalized. Moreover, a mechanism for the reaction of CO with hydrosilanes, in the presence and in the absence of amines, based on theoretical calculations has been proposed., The authors express their appreciation for the financial support from MICINN/FEDER projects PGC2018‐099383‐B‐100 and CTQ2016‐75884‐P, and the Regional Government of Aragón/FEDER 2014‐2020 “Building Europe from Aragón” (group E42_17R). J.M. acknowledges the financial support provided by the Spanish “Ministerio de Ciencia, Innovación y Universidades” (FPU14/06003). In addition, the resources from the supercomputer “Memento”, technical expertise and assistance provided by BIFIZCAM (Universidad de Zaragoza) are acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis and reactivity at the Ir-MeTpm platform: from κ1-N coordination to κ3-N-based organometallic chemistry

  • Fernández-Álvarez, Francisco J.
  • Polo, Víctor
  • García-Orduña, Pilar
  • Lahoz, Fernando J.
  • Pérez-Torrente, Jesús J.
  • Oro, Luis A.
  • Lalrempuia, Ralte
Reaction of [Ir(μ-Cl)(COE)2]2 (COE = cis-cyclooctene) with tris(3,5-dimethylpyrazol-1-yl)methane (MeTpm) affords [IrCl(κ1-N-MeTpm)(COD)] (1) (COD = 1,5-cyclooctadiene). The formation of 1 implies the transfer dehydrogenation of a COE ligand to give COD and COA (cyclooctane). A mechanistic proposal based on DFT calculations that explains this iridium promoted process has been disclosed. Additionally, reactivity studies have allowed the preparation and characterization, including determination of the molecular structures of a number of iridium complexes with the MeTpm ligand in κ1, κ2 or κ3-N coordination modes. Moreover, the first example of an Ir-cyclooctyl complex featuring hydride and carbonyl ligands, whose solid state structure has been determined by X-ray diffraction methods, is reported., Financial support from MINECO/FEDER under the projects CTQ2015-67366-P and CTQ2016-75884-P and DGA/FSE (project E42_17R) is gratefully acknowledged. Dr P. García-Orduña acknowledges CSIC, European Social Fund and Ministerio de Economía y Competitividad of Spain for a PTA contract. Dr R. Lalrempuia acknowledges support from ARAID foundation.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dinuclear phosphine-amido [Rh2(diene){μ-NH(CH2)3PPh2}2] complexes as efficient catalyst precursors for phenylacetylene polymerization

  • Angoy, Marta
  • Jiménez, M. Victoria
  • García-Orduña, Pilar
  • Oro, Luis A.
  • Vispe, Eugenio
  • Pérez-Torrente, Jesús J.
Dinuclear phosphine-amido, [Rh(diene){μ-NH(CH)PPh}], and cationic phosphine-amino complexes, [Rh(diene){PhP(CH)NHR}] (diene = cod, nbd, tfb) and [Rh{PhP(CH)NHR}], have been prepared from the corresponding amino-functionalized phosphines PhP(CH)NHR (R = H, Me) and suitable rhodium(I) precursors. The dinuclear [Rh(diene){μ-NH(CH)PPh}] complexes bearing π-acceptors diene ligands such as nbd or tfb exhibit a remarkable catalytic activity in phenylacetylene (PA) polymerization affording stereoregular polyphenylacetylenes with, unlike the cod precursor, unimodal molar mass distributions of very high molecular weights, M up to ≈ 1.2 × 10, and moderate polydispersity indexes. These complexes are more active than the mononuclear phosphino-anilido [Rh(diene){PhP(CH)NMe}] complexes, which are in turn more active than the cationic complexes [Rh(diene){PhP(CH)NHMe}], [Rh(nbd){PhP(CH)NH}], and [Rh(nbd){PhP(CH)NHMe}] bearing the same diene ligand. In contrast, complexes [Rh{PhP(CH)NHR}] (R = H, Me) without a diene ligand have been found to be inactive in PA polymerization. The excellent catalytic performance of [Rh(diene){μ-NH(CH)PPh}] (diene = nbd, tfb) complexes is a consequence of the mode of activation of PA that likely results in the formation of unsaturated alkynyl species [Rh(diene)(CC-Ph)L] (L = PA, THF), which may be competent for PA polymerization., Financial support from the Spanish Ministry of Economy and Competitiveness (MINECO/FEDER) under the Projects CTQ2013-42532-P and CTQ2016-75884-P and the Diputación General de Aragón (DGA/E42_17R) is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of graphene sheet properties as supports of iridium-based N-heterocyclic carbene hybrid materials for water oxidation electrocatalysis

  • Sánchez-Page, Beatriz
  • Pérez Mas, Ana Matilde
  • González-Ingelmo, María
  • Fernández, Laura
  • González Arias, Zoraida
  • Jiménez, M. Victoria
  • Pérez-Torrente, Jesús J.
  • Blasco, Javier
  • Subías, Gloria
  • Álvarez Rodríguez, Patricia
  • Granda Ferreira, Marcos
  • Menéndez López, Rosa María
The effect of the structural properties of graphene materials on the local structure of –OH anchored Ir(I)–NHC complexes is herein investigated. For that, two partially reduced graphene oxides exhibiting different sheet properties due to an adequate selection of the crystalline characteristics of their parent graphite were used. The main differences among them were the size of Csp2 domains within their graphenic layers and the distribution of functional groups at the basal planes and edges. Anchoring of N-methylimidazolium moieties through the graphene –OH functional groups and subsequent formation of the Ir(I)–NHC complexes resulted in graphene-based hybrid materials. The structural differences of the support have an influence in the interaction of the supported iridium compounds with the graphene sheet. The oxygenated functional groups in the material with a smaller graphene sheet are closer leaving larger Csp2 domains in the graphene layer, favoring their interaction with the supported iridium atoms therefore displacing the chlorido ligand from the first coordination shell. In contrast, the hybrid material in which the distribution of the oxygenated functional groups within the basal planes of the graphenic layer is more homogeneous shows partial chlorido displacement. This fact has an influence on the electrocatalytic performance of the iridium-based hybrid materials as water oxidation catalysts (WOCs), exhibiting improved catalytic activity the catalyst having coordinated chlorido ligands., Financial support from the Ministerio de Ciencia e Innovación (MICINN/FEDER) under the projects CTQ2016-75884-P and RTI2018-098537-B-C22, Gobierno de Aragón/FEDER 2014–2020 “Building Europe from Aragón” (groups E42_17R and E12_20R) and Principado de Asturias/FEDER (IDI/2018/000121) are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effective N-methylation of nitroarenes with methanol catalyzed by a functionalized NHC-based iridium catalyst: a green approach to N-methyl amines

  • González-Lainez, Miguel
  • Jiménez, M. Victoria
  • Passarelli, Vincenzo
  • Pérez-Torrente, Jesús J.
Compound [IrBr(CO)2(κC-tBuImCH2PyCH2OMe)] featuring a flexible pyridine/OMe functionalized NHC ligand κ1C coordinated efficiently catalyzes the selective N-monomethylation of nitroarenes using methanol as both the reducing agent and the C1 source. A range of functionalized nitroarenes including heterocyclic or sterically hindered derivatives have been efficiently converted to the corresponding N-monomethyl amines in good yields at low catalyst loadings using sub-stoichiometric amounts of Cs2CO3 as a base. Mechanistic investigations support a borrowing-hydrogen mechanism in which methanol acts as the hydrogen source and methylating agent. Further, the hydrogen transfer reduction of nitrobenzene to aniline under optimized reaction conditions should proceed through a direct mechanism involving nitrosobenzene and N-phenylhydroxylamine intermediates., Financial support from the Ministerio de Ciencia e Innovación (MICINN/FEDER) under the Project CTQ2016-75884-P and the Regional Government of Aragón/FEDER 2014-2020 “Building Europe from Aragón” (group E42_17R) is gratefully acknowledged. M. G.-L. thanks MINECO for a predoctoral fellowship (BES-2014-069624)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Carboxylate-assisted β-(Z) stereoselective hydrosilylation of terminal alkynes catalyzed by a zwitterionic bis-NHC rhodium(III) complex

  • Puerta-Oteo, Raquel
  • Munárriz, Julen
  • Polo, Víctor
  • Jiménez, M. Victoria
  • Pérez-Torrente, Jesús J.
The zwitterionic compound [Cp*RhCl{(MeIm)2CHCOO}] is an efficient catalyst for the hydrosilylation of terminal alkynes with excellent regio- and stereoselectivity toward the less thermodynamically stable β-(Z)-vinylsilane isomer under mild reaction conditions. A broad range of linear 1-alkynes, cycloalkyl acetylenes, and aromatic alkynes undergo the hydrosilylation with HSiMe2Ph to afford the corresponding β-(Z)-vinylsilanes in quantitative yields in short reaction times. The reaction of aliphatic alkynes with HSiEt3 is slower, resulting in a slight decrease of selectivity toward the β-(Z)-vinylsilane product, which is still greater than 90%. However, a significant selectivity decrease is observed in the hydrosilylation of aromatic alkynes because of the β-(Z) → β-(E) vinylsilane isomerization. Moreover, the hydrosilylation of bulky alkynes, such as t-Bu–C≡CH or Et3SiC≡CH, is unselective. Experimental evidence suggests that the carboxylate function plays a key role in the reaction mechanism, which has been validated by means of density functional theory calculations, as well as by mass spectrometry and labeling studies. On the basis of previous results, we propose an ionic outer-sphere mechanism pathway in which the carboxylate fragment acts as a silyl carrier. Namely, the hydrosilylation mechanism entails the heterolytic activation of the hydrosilane assisted by the carboxylate function to give the hydrido intermediate [Cp*RhH{(MeIm)2CHCOO–SiR3}]+. The transference of the silylium moiety from the carboxylate to the alkyne results in the formation of a flat β-silyl carbocation intermediate that undergoes a hydride transfer from the Rh(III) center to generate the vinylsilane product. The outstanding β-(Z) selectivity results from the minimization of the steric interaction between the silyl moiety and the ligand system in the hydride transfer transition state., The authors express their appreciation for the financial support from the Spanish Ministry of Economy and Competitiveness MINECO/FEDER under the project CTQ2016-75884-P and the Regional Governments of Aragón/FEDER 2014–2020 “Building Europe from Aragón” (group E42_17R). In addition, the resources from the supercomputer “Memento,” technical expertise, and assistance provided by BIFIZCAM (Universidad de Zaragoza) are acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

β-(Z) selectivity control by cyclometalated rhodium(III)–triazolylidene homogeneous and heterogeneous terminal alkyne hydrosilylation catalysts

  • Sánchez-Page, Beatriz
  • Munárriz, Julen
  • Jiménez, M. Victoria
  • Pérez-Torrente, Jesús J.
  • Blasco, Javier
  • Subías, Gloria
  • Passarelli, Vincenzo
  • Álvarez Rodríguez, Patricia
The cyclometalated Rh(III)–NHC compounds [Cp*RhI(C,C′)-Triaz] (Triaz = 1,4-diphenyl-3-methyl-1,2,3-triazol-5-ylidene) and [Cp*RhI(C,C′)-Im] (Im = 1-phenyl-3-methyl-imidazol-2-ylidene) are efficient catalysts for the hydrosilylation of terminal alkynes with complete regio- and stereoselectivity toward the thermodynamically less stable β-(Z)-vinylsilane isomer at room temperature in chloroform or acetone. Catalyst [Cp*RhI(C,C′)-Triaz] shows a superior catalytic performance in terms of activity and has been applied to the hydrosilylation of a range of linear 1-alkynes and phenylacetylene derivatives with diverse hydrosilanes, including HSiMePh2, HSiMe2Ph, HSiEt3, and the bulkier heptamethylhydrotrisiloxane (HMTS), to afford the corresponding β-(Z)-vinylsilanes in quantitative yields. The graphene-based hybrid material TRGO-Triaz-Rh(III), featuring cyclometalated [Cp*RhI(C,C′)-Triaz] (Triaz = 1,4-diphenyl-3-methyl-1,2,3-triazol-5-ylidene) rhodium(III) complexes covalently immobilized through the triazolylidene linker, has been prepared by metalation of the trimethylsilyl-protected 3-methyl-4-phenyl-1,2,3-triazolium iodide functionalized graphene oxide material, TRGO-Triaz, with [Cp*RhCl2]2 using sodium tert-butoxide as base. The coordination sphere of the supported rhodium(III) complexes has been determined by means of XPS and extended X-ray absorption fine structure (EXAFS) spectroscopy, showing the replacement of the iodido ligand by O-functionalities on the carbon wall. In sharp contrast with the homogeneous catalyst, the heterogeneous hybrid catalyst TRGO-Triaz-Rh(III) is not active at room temperature although it shows an excellent catalytic performance at 60 °C. In addition, the hybrid catalyst TRGO-Triaz-Rh(III) has shown an excellent recyclability, allowing at least six catalytic runs in the hydrosilylation of oct-1-yne with HSiMePh2 in acetone with complete selectivity to the β-(Z)-vinylsilane product. The reaction mechanism for the molecular catalyst [Cp*RhI(C,C′)-Triaz] has been explored by means of DFT calculations, pointing to a metal–ligand bifunctional mechanism involving reversible cyclometalation that is competitive with a noncooperative pathway. The proposed mechanism entails the Rh–CAr assisted hydrosilane activation to afford a reactive Rh–silyl intermediate that leads to a (E)-silylvinylene intermediate after alkyne insertion and a metallacyclopropene-driven isomerization. The release of the β-(Z)-vinylsilane product can occur by a reversible cyclometalation mechanism involving σ-CAM with the CAr–H bond or, alternatively, the Si–H bond of an external hydrosilane. The energy barrier for the latter is 1.2 kcal·mol–1 lower than that of the CAr–H bond, which results in a small energy span difference that makes both pathways competitive under catalytic conditions., The authors express their appreciation for the financial support from MICINN/FEDER, projects PID2019-103965GB-100, CTQ2016-75884-P and RTI2018-098537-B-C22, DGA/FEDER 2014-2020 “Building Europe from Aragón” (groups E42_20R and E12_20R), and Principado de Asturias/FEDER (IDI/2018/000121)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rhodium(I)‐NHC complexes bearing bidentate bis‐heteroatomic acidato ligands as gem‐selective catalysts for alkyne dimerization

  • Galiana-Cameo, María
  • Borraz Casanova, Marina
  • Zelenkova, Yaroslava
  • Passarelli, Vincenzo
  • Lahoz, Fernando J.
  • Pérez-Torrente, Jesús J.
  • Oro, Luis A.
  • Giuseppe, Andrea di
  • Castarlenas, Ricardo
A series of Rh(κ2‐BHetA)(η2‐coe)(IPr) complexes bearing 1,3‐bis‐hetereoatomic acidato ligands (BHetA) including carboxylato (O,O), thioacetato (O,S), amidato (O,N), thioamidato (N,S), and amidinato (N,N), have been prepared by reaction of the dinuclear precursor [Rh(μ‐Cl)(IPr)(η2‐coe)]2 with the corresponding anionic BHetA species. The RhI‐NHC‐BHetA compounds catalyze the dimerization of aryl alkynes, showing excellent selectivity for the head‐to‐tail enynes. Among them, the acetanilidato‐based catalyst has shown an outstanding catalytic performance reaching unprecedented TOF levels of 2500 h−1 with complete selectivity for the gem‐isomer. Investigation of the reaction mechanism supports a non‐oxidative pathway in which the BHetA ligand behaves as proton shuttle through intermediate κ1‐HBHetA species. However, in the presence of pyridine as additive, the identification of the common RhIIIH(C≡CPh)2(IPr)(py)2 intermediate gives support for an alternative oxidative route., Financial support from the Spanish Ministerio de Economía y Competitividad (MINECO/FEDER) under the Project CTQ2016‐75884‐P, the CSIC under the Project Proyectos Intramurales Especiales (201680I011), and the Diputación General de Aragón (DGA/FSE‐E42‐17R) are gratefully acknowledged. A.D.G. thanks the Spanish Ministerio de Economía y Competitividad (MINECO) for the postdoctoral grant Juan de la Cierva–Incorporación 2015 (IJCI‐2015‐27029)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Diseño y aplicaciones de catalizadores de rodio e iridio moleculares y soportados en materiales nanoestructurados de carbono

  • Sánchez-Page, Beatriz
Memoria presentada por Beatriz Sánchez Page, graduada en Química y Máster en Química Molecular y Catálisis Homogénea, para optar al grado de Doctor en Ciencias, en el programa de Doctorado en Química Inorgánica. Esta Tesis Doctoral se presenta en la modalidad de Tesis por compendio de publicaciones., [ES]: El trabajo desarrollado en esta Memoria se ha centrado en el diseño, síntesis, caracterización y estudios de estabilidad de compuestos moleculares de rodio e iridio soportados en materiales nanoestructurados de carbono. La actividad catalítica de los nuevos materiales híbridos y la de los complejos moleculares relacionados de rodio e iridio se ha evaluado en la hidrosililación de alquinos y en la oxidación química y electroquímica de agua, respectivamente. Los complejos de rodio(I) y (III) soportados en un óxido de grafeno reducido térmicamente a 400 ºC por enlace covalente carbono-nitrógeno entre un ligando NHC mesoiónico (4-fenil-3-metil-1,2,3-triazol-5-ilideno) y la pared del grafeno, Rh(I)/Rh(III)-NHC@TRGO, y los complejos moleculares relacionados muestran alta actividad en la hidrosililación de alquinos y una excelente regio- y estereoselectividad al isómero cinético β-(Z)-vinilsilano. Concretamente, el catalizador ciclometalado [Cp*RhI(C,C')-Triaz] (Triaz = 1,4-difenil-3-metil-1,2,3-triazol-5-ilideno) es un catalizador sobresaliente en la hidrosililación de alquinos terminales, alifáticos y aromáticos, a temperatura ambiente con completa regio- y estereoselectividad al isómero β(Z)-vinilsilano. Por otro lado, aunque el catalizador híbrido relacionado de rodio(III)-triazolilideno no es activo a temperatura ambiente, muestra la misma actividad y selectividad que el catalizador homogéneo a 60 °C. Adicionalmente, los catalizadores híbridos basados en grafeno modificado Rh-NHC@TRGO son completamente reciclables en la hidrosililación de alquinos con excelente control de la selectividad β-(Z). Los estudios por DFT del mecanismo de hidrosililación para el catalizador molecular de Rh(III) evidencian la posible participación de un mecanismo bifuncional metal-ligando basado en una ciclometalación reversible. Los materiales híbridos basados en complejos Ir(I)-NHC anclados a nanotubos de carbono a través de grupos éster, Ir(I)-NHC@CNT, son catalizadores eficientes en la oxidación química y electroquímica de agua. El estudio ha revelado que tanto los catalizadores moleculares homogéneos como los heterogéneos que poseen un ligando NHC funcionalizado con un grupo sulfonato son mucho más activos que los catalizadores moleculares relacionados con ligandos NHC no hidrosolubles, tanto en la oxidación química de agua, con CAN como oxidante de sacrificio, como en la oxidación electroquímica en la que se alcanzan valores de TOF de hasta 22000 h-1 a 1.4 V para el catalizador híbrido NHC-sulfonato. Por otro lado, se ha observado que la estructura grafítica del soporte juega un papel importante en el rendimiento electrocatalítico de oxidación de agua con complejos de iridio(I)-NHC soportados por enlace carbonato a dos óxidos de grafeno de diferente estructura grafítica. Se ha comprobado que el desplazamiento del ligando cloruro en los centros metálicos de iridio por grupos oxigenados de la pared nanoestructurada del grafeno tiene un impacto negativo en la actividad electrocatalítica del catalizador híbrido resultante., [EN]: The work developed in this Memory has been focused on the design, synthesis, characterization and stability studies of rhodium and iridium molecular compounds supported on carbon nanostructured materials. The catalytic activity of the new hybrid materials together and that of related molecular complexes of rhodium and iridium has been evaluated in the hydrosilylation of alkynes and in the chemical and electrochemical water oxidation, respectively. Rhodium(I) and (III) complexes supported on a thermally reduced graphene oxide at 400 °C by carbon‐nitrogen covalent bond between a mesoionic NHC ligand (4‐phenyl‐3‐methyl‐1,2,3‐triazole‐5‐ylidene) and the graphene wall, Rh(I)/Rh(III)‐NHC@TRGO, and related molecular complexes show high catalytic activity in hydrosilylation of alkynes with excellent regio‐ and stereoselectivity to the kinetic β‐(Z) vinylsilane isomer. Remarkably, the cyclometalated catalyst [Cp*RhI(C,C')‐Triaz] (Triaz = 1,4‐diphenyl‐3‐methyl‐1,2,3‐triazol‐5‐ylidene) shows an outstanding performance in the hydrosilylation of terminal, aliphatic and aromatic, alkynes with various hydrosilanes at room temperature with full regio‐ and stereoselectivity to β‐(Z)‐vinylsilanes. On the other hand, the related rhodium(III) triazolylidene hybrid catalyst is not active at room temperature although it shows an excellent catalytic performance at 60 °C. In addition, the hybrid catalysts based on modified graphene, Rh‐NHC@TRGO, are fully recyclable in alkyne hydrosilylation with excellent β-(Z) selectivity control. DFT studies on the alkyne hydrosilylation mechanism by the Rh(III) molecular catalyst point to the possible participation of a bifunctional metal‐ligand mechanism based on a reversible cyclometalation. The hybrid materials based on Ir(I)‐NHC complexes covalent attached to carbon nanotubes through ester functions, Ir(I)‐NHC@CNT, are efficient chemical and electrochemical water oxidation catalysts. The study has revealed that both homogeneous and heterogeneous molecular catalysts featuring NHC ligands functionalized with a sulfonate group are much more active than the related molecular catalysts lacking hydrosoluble NHC ligands, both in water chemical oxidation, using CAN as a sacrificial oxidant, or in electrochemical oxidation with TOF values up to 22000 h‐1 at 1.4 V for the sulfonate functionalized hybrid catalyst. On the other hand, it has been observed that the graphitic structure of the supports plays an important role in the water oxidation electrocatalytic performance of Ir(I)‐NHC complexes supported by carbonate bonding to two graphene oxides with different graphitic structure. A negative impact on the electrocatalytic activity has been found for the hybrid catalysts where the chloride ligand in the coordination sphere of the iridium metal centers has been displaced by oxygenated groups on the graphene nanostructured wall., Projects CTQ2016-75884-P, RTI2018-098537-B-C22, PID2019-103965GB-100, CTQ2013-42532-P and the Regional Governments of Aragón/FEDER/DGA 2014-2020 “Building Europe from Aragón” (groups E42_17R and E12_17R) and Principado de Asturias (FEDER: IDI/2018/000121)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Mechanistic insights into the tropo-inversion of the biphenyl moiety in chiral bis-amido phosphites and in their palladium(II) complexes

  • Passera, A.
  • Iuliano, A.
  • Pérez-Torrente, J.J.
  • Passarelli, V.
Chiral bis-amido phosphites L1 and L2 containing a diaminobiphenyl unit and a chiral alkoxy group derived from either (-)-menthol or 3-acetoxy deoxycholic methyl ester have been synthesised. Both L1 and L2 react with PdCl2(NCPh)2 affording di- or mononuclear derivatives with formula trans-[Pd(µ-Cl)Cl(L)]2 (1a, L = L1; 1b, L = L2) or trans-PdCl2(L)2 (2a, L = L1; 2b, L = L2) depending on the Pd:L molar ratio. The crystal structure of (M, P)-1a confirms the trans arrangement of the ligand L1 and shows an unusual puckering of the Pd2(µ-Cl)2 core (¿ 46°). Both the ligands L1 and L2 and their complexes (1 and 2) are fluxional in solution as a consequence of the tropo-inversion of the diaminobiphenyl unit. For L1, L2, 1a and 2a a combined study including variable temperature 31P{1H} NMR spectroscopy and line shape analysis, Eyring plots and DFT calculations have shed light on the mechanism of the tropo-inversion.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Experimental and Theoretical Mechanistic Investigation on the Catalytic CO2 Hydrogenation to Formate by a Carboxylate-Functionalized Bis(N -heterocyclic carbene) Zwitterionic Iridium(I) Compound

  • Puerta-Oteo, R.
  • Hölscher, M.
  • Jiménez, M.V.
  • Leitner, W.
  • Passarelli, V.
  • Pérez-Torrente, J.J.
The bis-imidazolium salt, 1, 1-bis(N-methylimidazolium) acetate bromide, is a convenient precursor for the synthesis of zwitterionic iridium(I) [Ir(cod){(MeIm)2CHCOO}] and cationic iridium(III) [IrH(cod){(MeIm)2CHCOO}]+ compounds (MeIm = 3-methylimidazol-2-yliden-1-yl) having a carboxylate-functionalized bis(NHC) ligand. The [Ir(cod){(MeIm)2CHCOO}] compound catalyzes the hydrogenation of CO2 to formate in water using NEt3 as base, reaching turnover numbers of approximately 1500. Reactivity studies have shown that activation of the catalyst precursor involves the reaction with H2 in a multistep process that under catalytic conditions results in the formation of a dihydrido iridium(III) octahedral [IrH2(H2O){(MeIm)2CHCOO}] species stabilized by the ¿3-C, C', O coordination of the ligand. DFT studies on the mechanism were carried out to elucidate two possible roles of the base. In the first one, NEt3 neutralizes only the produced formic acid, whereas in the second it assists the proton transfer in heterolytic cleavage of the H2 molecule. Although this base-involved mechanism is more favorable in that it exhibits a lower energy span for the overall reaction, the energy barrier obtained from kinetic experiments suggests that both mechanisms could be operative under the experimental reaction conditions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Zwitterionic Rhodium and Iridium Complexes Based on a Carboxylate Bridge-Functionalized Bis-N-heterocyclic Carbene Ligand: Synthesis, Structure, Dynamic Behavior, and Reactivity

  • Puerta-Oteo, R.
  • Jiménez, M.V.
  • Lahoz, F.J.
  • Modrego, F.J.
  • Passarelli, V.
  • Pérez-Torrente, J.J.
A series of water-soluble zwitterionic complexes featuring a carboxylate bridge-functionalized bis-N-heterocyclic carbene ligand of formula [Cp MIIICl{(MeIm)2CHCOO}] and [MI(diene){(MeIm)2CHCOO}] (Cp* = 1, 2, 3, 4, 5-pentamethylcyclopentadienyl; M = Rh, Ir; MeIm = 3-methylimidazol-2-yliden-1-yl; diene = 1, 5-cyclooctadiene (cod), norbornadiene (nbd)) were prepared from the salt [(MeImH)2CHCOO]Br and suitable metal precursor. The solid-state structure of both types of complexes shows a boat-shaped six-membered metallacycle derived of the ¿2C, C' coordination mode of the bis-NHC ligand. The uncoordinated carboxylate fragment is found at the bowsprit position in the Cp MIII complexes, whereas in the MI(diene) complexes it is at the flagpole position of the metallacycle. The complexes [RhI(diene){(MeIm)2CHCOO}] (diene = cod, nbd) exist as two conformational isomers in dichloromethane, bowsprit and flagpole, that interconvert through the boat-to-boat inversion of the metallacycle. An inversion barrier of ~17 kcal·mol-1 was determined by two-dimensional exchange spectroscopy NMR measurements for [RhI(cod){(MeIm)2CHCOO}]. Reaction of zwitterionic Cp MIII complexes with methyl triflate or tetrafluoroboric acid affords the cationic complexes [Cp MIIICl{(MeIm)2CHCOOMe}]+ or [Cp MIIICl{(MeIm)2CHCOOH}]+ (M = Rh, Ir) featuring carboxy and methoxycarbonyl functionalized methylene-bridged bis-NHC ligands, respectively. Similarly, complexes [MI(diene){(MeIm)2CHCOOMe}]+ (M = Rh, Ir) were prepared by alkylation of the corresponding zwitterionic MI(diene) complexes with methyl triflate. In contrast, reaction of [IrI(cod){(MeIm)2CHCOO}] with HBF4·Et2O (Et = ethyl), CH3OTf, CH3I, or I2 gives cationic iridium(III) octahedral complexes [IrIIIX(cod){(MeIm)2CHCOO}]+ (X = H, Me, or I) featuring a tripodal coordination mode of the carboxylate bridge-functionalized bis-NHC ligand. The switch from ¿2C, C' to ¿3C, C', O coordination of the bis-NHC ligand accompanying the oxidative addition prevents the coordination of the anions eventually formed in the process that remain as counterions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Molecular water oxidation catalysis by zwitterionic carboxylate bridge-functionalized bis-NHC iridium complexes

  • Puerta-Oteo, R.
  • Jiménez, M.V.
  • Pérez-Torrente, J.J.
Zwitterionic water-soluble [Cp*Ir III Cl{(MeIm) 2 CHCOO}] and [Ir I (cod){(MeIm) 2 CHCOO}] complexes featuring a carboxylate bridge-functionalized bis-N-heterocyclic carbene ligand efficiently catalyzed water oxidation using ammonium cerium(iv) nitrate (CAN) or sodium periodate as sacrificial oxidants. Excellent yields with TOF 50 numbers up to 1000 h -1 have been achieved using CAN as electron acceptor at [CAN]/[Ir] ratios higher than 700. The investigation of the reaction mechanism by UV-vis seems to evidence that both catalyst precursors are transformed into the same active molecular species resulting from the degradation of the hydrocarbon ligands which is partially supported by the similarity of the oxygen evolution profiles at moderate oxidant/catalyst ratios for both catalyst precursors and the same chemical oxidant. In addition, DLS studies provide evidence for the participation of homogeneous iridium molecular species as intermediates likely stabilized by the carboxylate-functionalized bis-NHC ligand.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Mechanistic studies on the: N -alkylation of amines with alcohols catalysed by iridium(i) complexes with functionalised N-heterocyclic carbene ligands

  • Jiménez, M.V.
  • Fernández-Tornos, J.
  • González-Lainez, M.
  • Sánchez-Page, B.
  • Modrego, F.J.
  • Oro, L.A.
  • Pérez-Torrente, J.J.
Iridium(i) cyclooctadiene complexes featuring O- and N-donor functionalised NHC ligands efficiently catalyse the C-N coupling of amines with alcohols through a borrowing hydrogen mechanism. These catalysts have been applied for the N-alkylation of several aromatic and aliphatic primary amines with a range of alcohols including benzyl alcohol derivatives, straight-chain primary alcohols and secondary alcohols. The cationic complex [Ir(NCCH3)(cod){MeIm(2-methoxybenzyl)}]+ (cod = 1, 5-cyclooctadiene, MeIm = 3-methylimidazol-2-ylidene) having a rigid O-donor wingtip exhibits the best catalytic performance for the N-alkylation of aniline with benzyl alcohol giving a quantitative conversion to N-benzylaniline in 3 h. Experimental and theoretical studies at the DFT level on the N-alkylation of aniline with benzyl alcohol catalysed by the model compound [IrCl(cod)(IMe)] (IMe = 1, 3-dimethyl-imidazol-2-ylidene) support the participation of the iridium catalyst not only in the alcohol dehydrogenation and imine hydrogenation steps but also in the key step leading to the formation of the new C-N bond. Nucleophilic attack of an iridium-amido species generated in basic medium on the electrophilic aldehyde results in a hemiaminolate intermediate species from which the hemiaminal is released by alcoholysis. The free hemiaminal dehydrates to give the corresponding intermediate imine product that is hydrogenated by the iridium catalyst to the N-alkylated amine product. The iridium(i) complexes featuring functionalised NHC ligands are more active than [IrCl(cod)(IMe)] which highlights the positive influence of the functional group on the N-alkylation catalytic activity.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Impact of protic ligands in the ir-catalyzed dehydrogenation of formic acid in water

  • Iturmendi, Amaia
  • Rubio-Pérez, Laura
  • Pérez-Torrente, Jesús J.
  • Iglesias, Manuel
  • Oro, Luis A.
New Ir-IPr complexes featuring a variety of chelate ligands, some of them featuring NH moieties, were synthesized. These complexes proved to be efficient catalysts for the dehydrogenation of formic acid in DMF and H2O. The dehydrogenation rates were dependent on the nature of the ligands that accompany IPr in the coordination sphere of the metal. In fact, complexes that contain protic ligands, namely, [Ir(8-aminoquinoline)(H)2(IPr)(PPhMe2)]BF4 and [Ir(CH3CN)(2-phenylimidazole)(H)(IPr)(PPhMe2)]BF4, showed the best activities in H2O. The former, which presents an NH2 group bound to the Ir center, is the most active (in H2O) of the catalysts presented in this work and can be recycled up to 10 times without an apparent loss of activity. This behavior may be attributed to the robust ligand system and, likely, to its ability to establish outer-sphere interactions. This postulation is supported by the fact that complex [Ir(8-dimethylaminoquinoline)(H)2(IPr)(PPhMe2)]BF4, which features an -NMe2 instead of an -NH2 donor group, gives rise to a strikingly lower catalytic activity.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A highly efficient Ir-catalyst for the solventless dehydrogenation of formic acid: the key role of an N-heterocyclic olefin

  • Iturmendi, Amaia
  • Iglesias, Manuel
  • Munarriz, Julen
  • Polo, Víctor
  • Passarelli, Vicenzo
  • Perez-Torrente, Jesús J.
  • Oro, Luis A.
The use of formic acid as a hydrogen energy carrier has sparked the interest of the scientific community in the development of catalysts that promote its selective dehydrogenation. Most of the catalysts so far reported require the use of solvents that reduce the hydrogen density of the mixture and may even damage the fuel cell electrode materials. We present here a sturdy iridium catalyst that features a PCP ligand based on an N-heterocyclic olefin (NHO) scaffold, which is remarkably active for the dehydrogenation of neat formic acid. Related complexes that present bis-phosphine ligands without an NHO donor moiety give rise to noticeably lower activities. This highlights the importance of the role played by the NHO in the activity of the catalyst. Moreover, by reacting the IrPCP(NHO) catalyst with an excess of HCOOH and pyridine we were able to isolate a plausible reaction intermediate. These postulations have been substantiated by DFT calculations.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Influence of graphene sheet properties as supports of iridium-based N-heterocyclic carbene hybrid materials for water oxidation electrocatalysis

  • Sánchez-Page, B.
  • Pérez-Mas, A.M.
  • González-Ingelmo, M.
  • Fernández, L.
  • González, Z.
  • Jiménez, M.V.
  • Pérez-Torrente, J.J.
  • Blasco, J.
  • Subías, G.
  • Álvarez, P.
  • Granda, M.
  • Menéndez, R.
The effect of the structural properties of graphene materials on the local structure of –OH anchored Ir(I)–NHC complexes is herein investigated. For that, two partially reduced graphene oxides exhibiting different sheet properties due to an adequate selection of the crystalline characteristics of their parent graphite were used. The main differences among them were the size of Csp2 domains within their graphenic layers and the distribution of functional groups at the basal planes and edges. Anchoring of N-methylimidazolium moieties through the graphene –OH functional groups and subsequent formation of the Ir(I)–NHC complexes resulted in graphene-based hybrid materials. The structural differences of the support have an influence in the interaction of the supported iridium compounds with the graphene sheet. The oxygenated functional groups in the material with a smaller graphene sheet are closer leaving larger Csp2 domains in the graphene layer, favoring their interaction with the supported iridium atoms therefore displacing the chlorido ligand from the first coordination shell. In contrast, the hybrid material in which the distribution of the oxygenated functional groups within the basal planes of the graphenic layer is more homogeneous shows partial chlorido displacement. This fact has an influence on the electrocatalytic performance of the iridium-based hybrid materials as water oxidation catalysts (WOCs), exhibiting improved catalytic activity the catalyst having coordinated chlorido ligands.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

ß-(Z) Selectivity Control by Cyclometalated Rhodium(III)-Triazolylidene Homogeneous and Heterogeneous Terminal Alkyne Hydrosilylation Catalysts

  • Sánchez-Page, B.
  • Munarriz, J.
  • Jiménez, M.V.
  • Pérez-Torrente, J.J.
  • Blasco, J.
  • Subias, G.
  • Passarelli, V.
  • Álvarez, P.
The cyclometalated Rh(III)-NHC compounds [Cp*RhI(C, C')-Triaz] (Triaz = 1, 4-diphenyl-3-methyl-1, 2, 3-triazol-5-ylidene) and [Cp*RhI(C, C')-Im] (Im = 1-phenyl-3-methyl-imidazol-2-ylidene) are efficient catalysts for the hydrosilylation of terminal alkynes with complete regio- and stereoselectivity toward the thermodynamically less stable ß-(Z)-vinylsilane isomer at room temperature in chloroform or acetone. Catalyst [Cp*RhI(C, C')-Triaz] shows a superior catalytic performance in terms of activity and has been applied to the hydrosilylation of a range of linear 1-alkynes and phenylacetylene derivatives with diverse hydrosilanes, including HSiMePh2, HSiMe2Ph, HSiEt3, and the bulkier heptamethylhydrotrisiloxane (HMTS), to afford the corresponding ß-(Z)-vinylsilanes in quantitative yields. The graphene-based hybrid material TRGO-Triaz-Rh(III), featuring cyclometalated [Cp*RhI(C, C')-Triaz] (Triaz = 1, 4-diphenyl-3-methyl-1, 2, 3-triazol-5-ylidene) rhodium(III) complexes covalently immobilized through the triazolylidene linker, has been prepared by metalation of the trimethylsilyl-protected 3-methyl-4-phenyl-1, 2, 3-triazolium iodide functionalized graphene oxide material, TRGO-Triaz, with [Cp*RhCl2]2 using sodium tert-butoxide as base. The coordination sphere of the supported rhodium(III) complexes has been determined by means of XPS and extended X-ray absorption fine structure (EXAFS) spectroscopy, showing the replacement of the iodido ligand by O-functionalities on the carbon wall. In sharp contrast with the homogeneous catalyst, the heterogeneous hybrid catalyst TRGO-Triaz-Rh(III) is not active at room temperature although it shows an excellent catalytic performance at 60 °C. In addition, the hybrid catalyst TRGO-Triaz-Rh(III) has shown an excellent recyclability, allowing at least six catalytic runs in the hydrosilylation of oct-1-yne with HSiMePh2 in acetone with complete selectivity to the ß-(Z)-vinylsilane product. The reaction mechanism for the molecular catalyst [Cp*RhI(C, C')-Triaz] has been explored by means of DFT calculations, pointing to a metal-ligand bifunctional mechanism involving reversible cyclometalation that is competitive with a noncooperative pathway. The proposed mechanism entails the Rh-CAr assisted hydrosilane activation to afford a reactive Rh-silyl intermediate that leads to a (E)-silylvinylene intermediate after alkyne insertion and a metallacyclopropene-driven isomerization. The release of the ß-(Z)-vinylsilane product can occur by a reversible cyclometalation mechanism involving s-CAM with the CAr-H bond or, alternatively, the Si-H bond of an external hydrosilane. The energy barrier for the latter is 1.2 kcal·mol-1 lower than that of the CAr-H bond, which results in a small energy span difference that makes both pathways competitive under catalytic conditions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Mechanistic insights on the functionalization of CO2 with amines and hydrosilanes catalyzed by a Zwitterionic iridium carboxylate-functionalized bis-NHC catalyst

  • Ojeda-Amador, A.I.
  • Munarriz, J.
  • Alamán-Valtierra, P.
  • Polo, V.
  • Puerta-Oteo, R.
  • Jiménez, M.V.
  • Fernández-Alvarez, F.J.
  • Pérez-Torrente, J.J.
The zwitterionic complex [Cp*IrCl{(MeIm)2CHCOO}] (1) efficiently catalyzes the selective hydrosilylation of CO2 to afford the corresponding silylformate. The best reaction performance has been achieved in acetonitrile at 348 K using HSiMe2Ph. The 1-catalyzed reaction of pyrrolidine with CO2 and HSiMe2Ph strongly depends on the CO2 pressure. At low concentration of CO2 (1 bar) formation of the corresponding silylcarbamate, by insertion of CO2 into the Si-N bond of the in situ generated silylamine was observed, while at higher pressure (3 bar) the formamide derivative was obtained as major reaction product. The unexpected formation of pyrrolidin-1-ium formate as intermediate of the reaction the 1-catalyzed of CO2 with pyrrolidine and HSiMe2Ph has been observed, and its role in the formation of 1-formylpyrrolidine rationalized. Moreover, a mechanism for the reaction of CO2 with hydrosilanes, in the presence and in the absence of amines, based on theoretical calculations has been proposed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Enhanced Chemical and Electrochemical Water Oxidation Catalytic Activity by Hybrid Carbon Nanotube-Based Iridium Catalysts Having Sulfonate-Functionalized NHC ligands

  • Nieto, J.
  • Jimenez, M.V.
  • Alvarez, P.
  • Perez-Mas, A.M.
  • Gonzalez, Z.
  • Pereira, R.
  • Sanchez-Page, B.
  • Perez-Torrente, J.J.
  • Blasco, J.
  • Subias, G.
  • Blanco, M.
  • Menendez, R.
The hybrid materials resulting from the covalent attachment of iridium NHC complexes, bearing 3-methyl-imidazol-2-ylidene and 3-(propyl-3-sulfonate)-imidazol-2-ylidene ligands to carbon nanotubes through ester functions, efficiently catalyzed water oxidation under chemical and electrochemical conditions. The hybrid catalyst featuring an NHC ligand with a propyl-sulfonate wingtip has shown an improved catalytic performance compared to that of the unfunctionalized material with TOF50 numbers up to 1140 h(-1) using ammonium cerium(IV) nitrate (CAN) as electron acceptor at [CAN]/[Ir] ratios higher than 2000. The positive effect of the presence of a polar sulfonate group in water oxidation has been also observed in related molecular catalysts with compound [Ir(cod){MeIm(CH2)(3)SO3}] being more active than [IrCl(cod){MeIm(CH2)(3)OH}]. The hybrid catalysts were less active than the molecular catalysts although their productivity has been improved by allowing successive additions of CAN or at least three recycling experiments. The electrochemical water oxidation by CNT-based hybrid materials resulted much more efficient. The positive influence of a watersoluble sulfonate wingtip in the hybrid catalysts has been also identified allowing with TOF values close to 22 000 h(-1) at 1.4 V. The local structure around iridium atoms in the heterogeneous catalysts has been determined by means of EXAFS applied before and after water oxidation reactions. The first coordination shell is similar in both fresh and postcatalytic catalysts but a slightly increase in the oxidation state of iridium atoms is observed what can be correlated to the peaks shifts in the XPS spectra for the oxidized materials.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Dinuclear Phosphine-Amido [Rh 2 (diene){µ-NH(CH 2 ) 3 PPh 2 } 2 ] Complexes as Efficient Catalyst Precursors for Phenylacetylene Polymerization

  • Angoy, Marta
  • Jiménez, M.Victoria
  • García-Orduña, Pilar
  • Oro, Luis A.
  • Vispe, Eugenio
  • Pérez-Torrente, Jesús J.
Dinuclear phosphine-amido, [Rh 2 (diene){µ-NH(CH 2 ) 3 PPh 2 } 2 ], and cationic phosphine-amino complexes, [Rh(diene){Ph 2 P(CH 2 ) 3 NHR}] + (diene = cod, nbd, tfb) and [Rh{Ph 2 P(CH 2 ) 3 NHR} 2 ] + , have been prepared from the corresponding amino-functionalized phosphines Ph 2 P(CH 2 ) 3 NHR (R = H, Me) and suitable rhodium(I) precursors. The dinuclear [Rh 2 (diene){µ-NH(CH 2 ) 3 PPh 2 } 2 ] complexes bearing p-acceptors diene ligands such as nbd or tfb exhibit a remarkable catalytic activity in phenylacetylene (PA) polymerization affording stereoregular polyphenylacetylenes with, unlike the cod precursor, unimodal molar mass distributions of very high molecular weights, M w up to ˜ 1.2 × 10 6 , and moderate polydispersity indexes. These complexes are more active than the mononuclear phosphino-anilido [Rh(diene){Ph 2 P(C 6 H 4 )NMe}] complexes, which are in turn more active than the cationic complexes [Rh(diene){Ph 2 P(CH 2 ) 3 NHMe}] + , [Rh(nbd){Ph 2 P(CH 2 ) 3 NH 2 }] + , and [Rh(nbd){Ph 2 P(C 6 H 4 )NHMe}] + bearing the same diene ligand. In contrast, complexes [Rh{Ph 2 P(CH 2 ) 3 NHR} 2 ] + (R = H, Me) without a diene ligand have been found to be inactive in PA polymerization. The excellent catalytic performance of [Rh 2 (diene){µ-NH(CH 2 ) 3 PPh 2 } 2 ] (diene = nbd, tfb) complexes is a consequence of the mode of activation of PA that likely results in the formation of unsaturated alkynyl species [Rh(diene)(CC-Ph)L] (L = PA, THF), which may be competent for PA polymerization. © 2019 American Chemical Society.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Mechanistic Investigation on the Polymerization of Phenylacetylene by 2-Diphenylphosphinopyridine Rhodium(I) Catalysts: Understanding the Role of the Cocatalyst and Alkynyl Intermediates

  • Angoy, M.
  • Jimenez, M.V.
  • Modrego, F.J.
  • Oro, L.A.
  • Passarelli, V.
  • Perez-Torrente, J.J.
The mono- and dinuclear rhodium(I) complexes featuring 2-(diphenylphosphino)pyridine ligands, [Rh(cod)(Ph2PPy)(+) and [Rh(nbd)(mu-Ph2PPY)(2)(2+) (cod = 1, 5-cyclooctadiene, nbd = 2, 5-norbornadiene), have been prepared in order to be evaluated as phenylacetylene (PA) polymerization catalysts. In contrast with compound [Rh(nbd){Ph2P(CH2)(2)Py}(+), featuring a 2 -(2-(diphenylphosphino)ethyl)pyridine ligand, that showed a moderate catalytic activity, both [Rh(diene)(Ph2PPy)](n)(n+) (n = 1, cod; n = 2, nbd) complexes showed no catalytic activity due to the formation of unusual dinuclear species [Rh-2(diene)(2)(mu-Ph2PPy)(mu-C=C-R))+, supported by a Ph2PPy bridging ligand and an alkynyl ligand coordinated in a mu-eta(1):eta(2) fashion, which are inactive in PA polymerization. However, compounds [Rh(diene)(Ph2PPy)](n)(n+) efficiently polymerize PA in the presence of a cocatalyst as iPrNH(2) affording highly stereoregular poly(phenylacetylene) (PPA) of My, = 3.42 X 10(5) (cod) and 2.02 X 10(5) (nbd) with polydispersities of 1.39 and initiation efficiencies of 4-7%. NMR studies on the polymerization reaction have allowed identification of the alkynyl species [Rh(C equivalent to CPh)(cod)(Ph2PPy)] as the likely initiating species involved in the generation of the rhodium-vinyl species responsible for the propagation step. The iPrNH(2) cocatalyst is possibly involved in the efficient proton transfer from the coordinated PA to iPrNH(2) that allows for a significant concentration of the key initiating species [Rh(C-CPh)(cod)(Ph2PPy)]. The distinct behavior of compounds [Rh(diene)(Ph2PPy)](n)(n+) as PA polymerization catalysts is a consequence of the binucleating ability of the Ph2PPy ligand in combination with the low basicity of the pyridine fragment which allows for the stabilization of the inactive alkynyl-bridge dinuclear species.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Hybrid Catalysts Comprised of Graphene Modified with Rhodium-Based N-Heterocyclic Carbenes for Alkyne Hydrosilylation

  • Sanchez-Page, B.
  • Jimenez, M.V.
  • Perez-Torrente, J.J.
  • Passarelli, V.
  • Blasco, J.
  • Subias, G.
  • Granda, M.
  • Alvarez, P.
Thermally partially reduced graphene oxide has been covalently modified with 3-methyl-4-phenyl-1, 2, 3-triazolium salts making use of the epoxy functionalities on the carbon nanomaterial. Characterization of the functionalized materials through adequate solid characterization techniques, particularly X-ray photoelectron spectroscopy (XPS), allows one to follow the stepwise building up of the triazolium fragments on the graphene oxide attached to the wall via covalent C-N linkage. The hydroxyl-triazolium-functionalized materials have been used to prepare rhodium hybrid materials containing either alkoxo or triazolylidene molecular rhodium(I) complexes depending on the protection of the hydroxyl groups present in the material. Characterization of the heterogeneous systems, especially by means of XPS and extended X-ray absorption fine structure (EXAFS) spectroscopy, has evidenced the coordination sphere of the supported rhodium(I) complexes in both rhodium hybrid materials. The graphene-oxide-supported rhodium triazolylidene hybrid catalysts show excellent activity, comparable to that of the homogeneous [RhI(cod)(Triaz)] (Triaz = 1, 4-diphenyl-3-methyl-1, 2, 3-triazol-5-ylidene) catalyst, for the hydrosilylation of terminal and internal alkynes. In addition, these catalysts have shown good selectivity to the beta-(Z) vinylsilane isomers (for the not hindered terminal substrates) or syn-additions (for the internal substrates). In contrast to the rhodium(I)-alkoxo-based hybrid material, the silyl-protected rhodium(I)-triazolylidene-based hybrid catalyst can be reused in consecutive cycles without loss of activity maintaining the selectivity. The lack of leaching of active rhodium species demonstrates the strength of the C-N covalent bond of the triazolylidene linker to the graphitic wall.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

EffectiveN-methylation of nitroarenes with methanol catalyzed by a functionalized NHC-based iridium catalyst: a green approach toN-methyl amines

  • González-Lainez, Miguel
  • Jiménez, M. Victoria
  • Passarelli, Vicenzo
  • Pérez-Torrente, Jesús J.
Compound [IrBr(CO)2(¿C-tBuImCH2PyCH2OMe)] featuring a flexible pyridine/OMe functionalized NHC ligand ¿1C coordinated efficiently catalyzes the selective N-monomethylation of nitroarenes using methanol as both the reducing agent and the C1 source. A range of functionalized nitroarenes including heterocyclic or sterically hindered derivatives have been efficiently converted to the corresponding N-monomethyl amines in good yields at low catalyst loadings using sub-stoichiometric amounts of Cs2CO3 as a base. Mechanistic investigations support a borrowing-hydrogen mechanism in which methanol acts as the hydrogen source and methylating agent. Further, the hydrogen transfer reduction of nitrobenzene to aniline under optimized reaction conditions should proceed through a direct mechanism involving nitrosobenzene and N-phenylhydroxylamine intermediates.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Carboxylate-Assisted ß-(Z) Stereoselective Hydrosilylation of Terminal Alkynes Catalyzed by a Zwitterionic Bis-NHC Rhodium(III) Complex

  • Puerta-Oteo, R.
  • Munarriz, J.
  • Polo, V.
  • Jiménez, M.V.
  • Pérez-Torrente, J.J.
The zwitterionic compound [Cp*RhCl{(MeIm)2CHCOO}] is an efficient catalyst for the hydrosilylation of terminal alkynes with excellent regio- and stereoselectivity toward the less thermodynamically stable ß-(Z)-vinylsilane isomer under mild reaction conditions. A broad range of linear 1-alkynes, cycloalkyl acetylenes, and aromatic alkynes undergo the hydrosilylation with HSiMe2Ph to afford the corresponding ß-(Z)-vinylsilanes in quantitative yields in short reaction times. The reaction of aliphatic alkynes with HSiEt3 is slower, resulting in a slight decrease of selectivity toward the ß-(Z)-vinylsilane product, which is still greater than 90%. However, a significant selectivity decrease is observed in the hydrosilylation of aromatic alkynes because of the ß-(Z) ¿ ß-(E) vinylsilane isomerization. Moreover, the hydrosilylation of bulky alkynes, such as t-Bu-CCH or Et3SiCCH, is unselective. Experimental evidence suggests that the carboxylate function plays a key role in the reaction mechanism, which has been validated by means of density functional theory calculations, as well as by mass spectrometry and labeling studies. On the basis of previous results, we propose an ionic outer-sphere mechanism pathway in which the carboxylate fragment acts as a silyl carrier. Namely, the hydrosilylation mechanism entails the heterolytic activation of the hydrosilane assisted by the carboxylate function to give the hydrido intermediate [Cp*RhH{(MeIm)2CHCOO-SiR3}]+. The transference of the silylium moiety from the carboxylate to the alkyne results in the formation of a flat ß-silyl carbocation intermediate that undergoes a hydride transfer from the Rh(III) center to generate the vinylsilane product. The outstanding ß-(Z) selectivity results from the minimization of the steric interaction between the silyl moiety and the ligand system in the hydride transfer transition state. Copyright
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Synthesis and reactivity at the Ir-MeTpm platform: from k1-N coordination to k3-N-based organometallic chemistry

  • Fernández-Alvarez, Francisco J.
  • Polo, Víctor
  • García-Orduña, Pilar
  • Lahoz, Fernando J.
  • Pérez-Torrente, Jesús J.
  • Oro, Luis A.
  • Lalrempuia, Ralte
Reaction of [Ir(µ-Cl)(COE)2]2 (COE = cis-cyclooctene) with tris(3, 5-dimethylpyrazol-1-yl)methane (MeTpm) affords [IrCl(¿1-N-MeTpm)(COD)] (1) (COD = 1, 5-cyclooctadiene). The formation of 1 implies the transfer dehydrogenation of a COE ligand to give COD and COA (cyclooctane). A mechanistic proposal based on DFT calculations that explains this iridium promoted process has been disclosed. Additionally, reactivity studies have allowed the preparation and characterization, including determination of the molecular structures of a number of iridium complexes with the MeTpm ligand in ¿1, ¿2 or ¿3-N coordination modes. Moreover, the first example of an Ir-cyclooctyl complex featuring hydride and carbonyl ligands, whose solid state structure has been determined by X-ray diffraction methods, is reported.