Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 26
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

ß-(Z) Selectivity Control by Cyclometalated Rhodium(III)-Triazolylidene Homogeneous and Heterogeneous Terminal Alkyne Hydrosilylation Catalysts

  • Sánchez-Page, B.
  • Munarriz, J.
  • Jiménez, M.V.
  • Pérez-Torrente, J.J.
  • Blasco, J.
  • Subias, G.
  • Passarelli, V.
  • Álvarez, P.
The cyclometalated Rh(III)-NHC compounds [Cp*RhI(C, C')-Triaz] (Triaz = 1, 4-diphenyl-3-methyl-1, 2, 3-triazol-5-ylidene) and [Cp*RhI(C, C')-Im] (Im = 1-phenyl-3-methyl-imidazol-2-ylidene) are efficient catalysts for the hydrosilylation of terminal alkynes with complete regio- and stereoselectivity toward the thermodynamically less stable ß-(Z)-vinylsilane isomer at room temperature in chloroform or acetone. Catalyst [Cp*RhI(C, C')-Triaz] shows a superior catalytic performance in terms of activity and has been applied to the hydrosilylation of a range of linear 1-alkynes and phenylacetylene derivatives with diverse hydrosilanes, including HSiMePh2, HSiMe2Ph, HSiEt3, and the bulkier heptamethylhydrotrisiloxane (HMTS), to afford the corresponding ß-(Z)-vinylsilanes in quantitative yields. The graphene-based hybrid material TRGO-Triaz-Rh(III), featuring cyclometalated [Cp*RhI(C, C')-Triaz] (Triaz = 1, 4-diphenyl-3-methyl-1, 2, 3-triazol-5-ylidene) rhodium(III) complexes covalently immobilized through the triazolylidene linker, has been prepared by metalation of the trimethylsilyl-protected 3-methyl-4-phenyl-1, 2, 3-triazolium iodide functionalized graphene oxide material, TRGO-Triaz, with [Cp*RhCl2]2 using sodium tert-butoxide as base. The coordination sphere of the supported rhodium(III) complexes has been determined by means of XPS and extended X-ray absorption fine structure (EXAFS) spectroscopy, showing the replacement of the iodido ligand by O-functionalities on the carbon wall. In sharp contrast with the homogeneous catalyst, the heterogeneous hybrid catalyst TRGO-Triaz-Rh(III) is not active at room temperature although it shows an excellent catalytic performance at 60 °C. In addition, the hybrid catalyst TRGO-Triaz-Rh(III) has shown an excellent recyclability, allowing at least six catalytic runs in the hydrosilylation of oct-1-yne with HSiMePh2 in acetone with complete selectivity to the ß-(Z)-vinylsilane product. The reaction mechanism for the molecular catalyst [Cp*RhI(C, C')-Triaz] has been explored by means of DFT calculations, pointing to a metal-ligand bifunctional mechanism involving reversible cyclometalation that is competitive with a noncooperative pathway. The proposed mechanism entails the Rh-CAr assisted hydrosilane activation to afford a reactive Rh-silyl intermediate that leads to a (E)-silylvinylene intermediate after alkyne insertion and a metallacyclopropene-driven isomerization. The release of the ß-(Z)-vinylsilane product can occur by a reversible cyclometalation mechanism involving s-CAM with the CAr-H bond or, alternatively, the Si-H bond of an external hydrosilane. The energy barrier for the latter is 1.2 kcal·mol-1 lower than that of the CAr-H bond, which results in a small energy span difference that makes both pathways competitive under catalytic conditions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

2-Pyridone-stabilized iridium silylene/silyl complexes: Structure and QTAIM analysis

  • Guzmán, J.
  • Bernal, A.M.
  • García-Orduña, P.
  • Lahoz, F.J.
  • Polo, V.
  • Fernández-Alvarez, F.J.
Iridium(III) complexes of the general formula [Ir(X)(κ2-NSiiPr2)2] (NSiiPr2 = (4-methyl-pyridine-2-yloxy)diisopropylsilyl; X = Cl, 3; CF3SO3, 5; CF3CO2, 6) have been prepared and fully characterized, including X-ray diffraction studies and theoretical calculations. The presence of isopropyl substituents at the silicon atom favours the monomeric structure found in complexes 3 and 5. The short Ir–Si bond distances (2.25–2.28 Å) indicate some degree of base-stabilized silylene character of the Ir–Si bond in 3, 5 and 6 assisted by the 2-pyridone moiety. However, the shortening of these Ir–Si bonds might be a consequence of the constrained 2-pyridone geometry, and consequently the silyl character of these bonds can not be excluded. A DFT theoretical study on the nature of the Ir–Si bonds has been performed for complex 3 as well as for four other iridium complexes finding representative examples of different bonding situations between Ir and Si atoms: silylene, base-assisted silylene (both with an anionic base and with a neutral base), and silyl bonds, using the topological properties of the electron charge density. The results of these studies show that the Ir–Si bonds in Ir–NSiiPr2 complexes can be considered as an intermediate between the base-stabilized silylene and silyl cases, and therefore they have been proposed as 2-pyridone-stabilized iridium silylene/silyl bonds.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Preparation of Butadienylpyridines by Iridium-NHC-Catalyzed Alkyne Hydroalkenylation and Quinolizine Rearrangement

  • Azpíroz R.
  • Greger I.
  • Oro L.A.
  • Passarelli V.
  • Castarlenas R.
  • Pérez-Torrente J.J.
Iridium(I) N-heterocyclic carbene complexes of formula Ir(¿2O, O’-BHetA)(IPr)(¿2-coe) [BHetA=bis-heteroatomic acidato, acetylacetonate or acetate; IPr=1, 3-bis(2, 6-diisopropylphenyl)imidazolin-2-carbene; coe=cyclooctene] have been prepared by treating Ir(¿2O, O’-BHetA)(¿2-coe)2 complexes with IPr. These complexes react with 2-vinylpyridine to afford the hydrido-iridium(III)-alkenyl cyclometalated derivatives IrH(¿2O, O’-BHetA)(¿2N, C-C7H6N)(IPr) through the iridium(I) intermediate Ir(¿2O, O’-BHetA)(IPr)(¿2-C7H7N). The cyclometalated IrH(¿2O, O’-acac)(¿2N, C–C7H6N)(IPr) complex efficiently catalyzes the hydroalkenylation of aromatic and aliphatic terminal alkynes and enynes with 2-vinylpyridine to afford 2-(4R-butadienyl)pyridines with Z, E configuration as the major reaction products (yield up to 89 %). In addition, unprecedented (Z)-2-butadienyl-5R-pyridine derivatives have been obtained as minor reaction products (yield up to 21 %) from the elusive 1Z, 3gem-butadienyl hydroalkenylation products. These compounds undergo a thermal 6p-electrocyclization to afford bicyclic 4H-quinolizine derivatives that, under catalytic reaction conditions, tautomerize to 6H-quinolizine to afford the (Z)-2-(butadienyl)-5R-pyridine by a retro-electrocyclization reaction. © 2021 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Variation on the p-acceptor ligand within a Rhi-N-Heterocyclic carbene framework: divergent catalytic outcomes for phenylacetylene-methanol transformations

  • Galiana-Cameo M.
  • Passarelli V.
  • Pérez-Torrente J.J.
  • Di Giuseppe A.
  • Castarlenas R.
A series of neutral and cationic rhodium complexes bearing IPr {IPr=1, 3-bis-(2, 6-diisopropylphenyl)imidazolin-2-carbene} and p-acceptor ligands are reported. Cationic species [Rh(¿4-cod)(IPr)(NCCH3)]+ and [Rh(CO)(IPr)(L)2]+ (L=pyridine, CH3CN) were obtained by chlorido abstraction in suitable complexes, whereas the cod-CO derivative [Rh(¿4-cod)(IPr)(CO)]+ was formed by the carbonylation of [Rh(¿4-cod)(IPr)(NCCH3)]+. Alternatively, neutral derivatives of type RhCl(IPr)(L)2 {L=tBuNC or P(OMe)3} can be accessed from [Rh(µ-Cl)(¿2-coe)(IPr)]2. In addition, the mononuclear species Rh(CN)(¿4-cod)(IPr) was prepared by cyanide-chlorido anion exchange, which after carbonylation afforded the unusual trinuclear compound [Rh{1¿C, 2¿N-(CN)}(CO)(IPr)]3. Divergent catalytic outcomes in the phenylacetylene-methanol transformations have been observed. Thus, enol ethers, arisen from hydroalkoxylation of the alkyne, were obtained with neutral Rh-CO catalyst precursors whereas dienol ethers were formed with cationic catalysts. Variable amounts of alkyne dimerization, cyclotrimerization or polymerization products were obtained in the absence of a strong p-acceptor ligand on the catalyst. © 2021 The Authors. European Journal of Inorganic Chemistry published by Wiley-VCH GmbH
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Rhodium-NHC-Catalyzed gem-Specific O-Selective Hydropyridonation of Terminal Alkynes

  • Galiana-Cameo, Maria
  • Romeo, Raul
  • Urriolabeitia, Asier
  • Passarelli, Vincenzo
  • Perez-Torrente, Jesus J.
  • Polo, Victor
  • Castarlenas, Ricardo
The dinuclear complex Rh(mu-Cl)(eta(2)-coe)(IPr)](2) is an efficient catalyst for the O-selective Markovnikov-type addition of 2-pyridones to terminal alkynes. DFT calculations support a hydride-free pathway entailing intramolecular oxidative protonation of a pi-alkyne by a kappa N-1-hydroxypyridine ligand. Subsequent O-nucleophilic attack on a metallacyclopropene species affords an O-alkenyl-2-oxypyridine chelate rhodium intermediate as the catalyst resting state. The release of the alkenyl ether is calculated as the rate-determining step.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Dinuclear silver and gold bisNHC complexes as drug candidates for cancer therapy

  • Quintana, M.
  • Rodriguez-Rius, A.
  • Vellé, A.
  • Vives, S.
  • Sanz Miguel, P.J.
  • Triola, G.
We report four dinuclear silver(I) and gold(I) complexes containing two different bidentate N-heterocyclic carbene ligands (bisNHC). One of these complexes 4, shows strong and selective anticancer activity against the human ovarian cancer cell line A2780. Mechanistically, 4 enhances the oxidative stress by stimulating reactive oxygen species production and inhibiting the scavenging activity of thioredoxin reductase. Our findings provide evidence that tuning ligand and electronic properties of metal-NHC complexes can modulate their reactivity and selectivity and it may result in potential novel anticancer drugs.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

N-Methylation of Amines with Methanol Catalyzed by Iridium(I) Complexes Bearing an N, O-Functionalized NHC Ligand

  • González-Lainez, Miguel
  • Jiménez, M. Victoria
  • Azpiroz, Ramón
  • Passarelli, Vincenzo
  • Modrego, F. Javier
  • Pérez-Torrente, Jesús J.
A set of neutral IrBr(L-2)-(kappa C-(t)BuImCH(2)PyCH(2)OMe)] and cationic Ir(L-2)-(kappa C, N-tBuImCH(2)PyCH(2)OMe)]PF6 (L-2 = cod, (CO)(2)) Ir(I) compounds featuring a flexible lutidine-derived polydentate ligand having NHC and - OMe as donor functions have been evaluated as catalyst precursors for the N-methylation of aniline using methanol both as a reducing agent and a C1 source. The carbonyl complexes are somewhat more active than the related diene compounds with the neutral compound IrBr(CO)(2)(kappa C-(t)BuImCH(2)PyCH(2)OMe)] being the more active. A range of aromatic primary amines, including heterocyclic amines, have been selectively transformed into the corresponding N-methylamino derivatives using this catalyst at a low catalyst loading (0.1 mol %) and substoichiometric amounts of Cs2CO3 (half equiv) as a base, in methanol at 423 K. For aliphatic primary amines, selective N, N-dimethylation was achieved under the same catalytic conditions. The unselective deprotonation of the methylene linkers in IrBr(CO)(2)(kappa C-(t)BuImCH(2)PyCH(2)OMe)] affords two isomeric neutral complexes featuring a coordinated dearomatized pyridine core, which were converted into Ir(OMe)(CO)(2)(kappa C-(t)BuImCH(2)PyCH(2)OMe)] upon addition of methanol. This compound undergoes thermal activation of a C-H bond of the tert-butyl group to give the cyclometalated iridium(I) complex Ir(CO)(2){kappa C-2, C-(-CH2Me2C-ImCH(2)PyCH(2)OMe)}] featuring a bidentate C, C-coordinated NHC ligand. Mechanistic investigations support a borrowing hydrogen mechanism proceeding through iridium(I) intermediates with the methoxo complex as the catalytic active species and the cyclometalated complex as the catalyst resting state. Deuterium labeling experiments have demonstrated that both species are in equilibrium under catalytic conditions, which is consistent with the exhibited catalytic activity of the cyclometalated complex.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Copper-catalyzed azide-alkyne cycloaddition (CuAAC) by functionalized NHC-based polynuclear catalysts: scope and mechanistic insights

  • González-Lainez, M.
  • Gallegos, M.
  • Munárriz, J.
  • Azpiroz, R.
  • Passarelli, V.
  • Jiménez, M. V.
  • Pérez Torrente, J. J.
Copper(I) Cu2(µ-Br)2(tBuImCH2pyCH2L)]n (L = OMe, NEt2, NHtBu) compounds supported by flexible functionalized NHC-based polydentate ligands have been prepared in a one-pot procedure by reacting the corresponding imidazolium salt with an excess of copper powder and Ag2O. An X-ray diffraction analysis has revealed that Cu2(µ-Br)2(tBuImCH2pyCH2NEt2)]n is a linear coordination polymer formed by bimetallic Cu(µ-Br)]2 units linked by the lutidine-based NHC-py-NEt2 ligand, which acts as a heteroditopic ligand with a 1¿C-2¿2N, N' coordination mode. We propose that the polymeric compounds break down in the solution into more compact tetranuclear Cu2(µ-Br)2(tBuImCH2pyCH2L)]2 compounds with a coordination mode identical to the functionalized NHC ligands. These compounds have been found to exhibit high catalytic activity in the Cu-catalyzed azide-alkyne cycloaddition (CuAAC) reaction. In particular, Cu2(µ-Br)2(tBuImCH2pyCH2NEt2)]2 efficiently catalyzes the click reaction of a range of azides and alkynes, under an inert atmosphere at room temperature in neat conditions at a very low catalyst loading, to quantitatively afford the corresponding 1, 4-disubstituted 1, 2, 3-triazole derivatives in a few minutes. The cycloaddition reaction of benzyl azide to phenylacetylene can be performed at 25-50 ppm catalyst loading by increasing the reaction time and/or temperature. Reactivity studies have shown that the activation of the polynuclear catalyst precursor involves the alkyne deprotonation by the NHC moiety of the polydentate ligand to afford a copper(I)-alkynyl species bearing a functionalized imidazolium ligand. DFT calculations support the participation of the dinuclear species (CuBr)2(µ-tBuImCH2pyCH2NEt2)], resulting from the fragmentation of the tetranuclear compound, as the catalytically active species. The proposed reaction pathway proceeds through zwitterionic dinuclear intermediates and entails the active participation of both copper atoms, as well as the NHC moiety as an internal base, which activates the reacting alkyne via deprotonation.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Iridium(i) complexes bearing hemilabile coumarin-functionalised N-heterocyclic carbene ligands with application as alkyne hydrosilylation catalysts

  • Karatas M.O.
  • Alici B.
  • Passarelli V.
  • Özdemir I.
  • Pérez-Torrente J.J.
  • Castarlenas R.
A set of iridium(i) complexes of formula IrCl(¿C, ¿2-IRCouR')(cod) or IrCl(¿C, ¿2-BzIRCouR')(cod) (cod = 1, 5-cyclooctadiene; Cou = coumarin; I = imidazolin-2-carbene; BzI = benzimidazolin-2-carbene) have beeen prepared from the corresponding azolium salt and [Ir(µ-OMe)(cod)]2 in THF at room temperature. The crystalline structures of 4b and 5b show a distorted trigonal bipyramidal configuration in the solid state with a coordinated coumarin moiety. In contrast, an equilibrium between this pentacoordinated structure and the related square planar isomer is observed in solution as a consequence of the hemilability of the pyrone ring. Characterization of both species by NMR was achieved at the low and high temperature limits, respectively. In addition, the thermodynamic parameters of the equilibrium, ¿HR and ¿SR, were obtained by VT 1H NMR spectroscopy and fall in the range 22-33 kJ mol-1 and 72-113 J mol-1 K-1, respectively. Carbonylation of IrCl(¿C, ¿2-BzITolCou7, 8-Me2)(cod) resulted in the formation of a bis-CO derivative showing no hemilabile behaviour. The newly synthesised complexes efficiently catalyze the hydrosilylation of alkynes at room temperature with a preference for the ß-(Z) vinylsilane isomer. © The Royal Society of Chemistry.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

In-flow photocatalytic oxidation of NO on glasses coated with nanocolumnar porous TiO2 thin films prepared by reactive sputtering

  • Azpiroz, Ramón
  • Carretero, Enrique
  • Cueva, Ana
  • González, Aida
  • Iglesias, Manuel
  • Pérez-Torrente, Jesús J.
The magnetron sputtering technique has been successfully employed for the preparation of porous TiO2 thin films on soda-lime glasses by means of an oblique angle deposition strategy. The morphology of the thin layers is affected by the deposition parameters, such as, the angle with respect to the target, applied power, total pressure, oxygen pressure and deposition time. It has been shown that 60–65° angles, lead to a compromise between the porosity, the level of oxidation and the thickness of the film. High total pressures of the deposition process result in less dense coatings of greater porosity. Moreover, the oxygen flow during the deposition process must be carefully adjusted for each set of deposition conditions, in order to achieve an optimum degree of oxidation. The evaluation of coated-glasses in the in-flow photocatalytic oxidation of nitrogen oxide has shown that the presence of a porous film is essential to achieve photocatalytic activity. The best performing coated-glass was able to reduce the NO concentration ca. 20% for 5 h. SEM and TEM images of this film show a microstructure composed of nanometric grains and a tilted columnar structure. Nanocrystal electron diffraction, XRD and Raman spectroscopy have confirmed the deposition of TiO2 anatase.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Preparation of mixed Bis-N-Heterocyclic Carbene Rhodium(I) Complexes

  • Azpíroz, Ramón
  • Karatas, Mert Olgun
  • Passarelli, Vincenzo
  • Özdemir, Ismail
  • Pérez-Torrente, Jesús J.
  • Castarlenas, Ricardo
A series of mixed bis-NHC rhodium(I) complexes of type RhCl(η2-olefin)(NHC)(NHC’) have been synthesized by a stepwise reaction of [Rh(μ-Cl)(η2-olefin)2]2 with two different NHCs (NHC = N-heterocyclic carbene), in which the steric hindrance of both NHC ligands and the η2-olefin is critical. Similarly, new mixed coumarin-functionalized bis-NHC rhodium complexes have been prepared by a reaction of mono NHC complexes of type RhCl(NHC-coumarin)(η2,η2-cod) with the corresponding azolium salt in the presence of an external base. Both synthetic procedures proceed selectively and allow the preparation of mixed bis-NHC rhodium complexes in good yields.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Selective Oxidation of Glycerol via Acceptorless Dehydrogenation Driven by Ir(I)-NHC Catalysts

  • Jiménez, M. Victoria
  • Ojeda-Amador, Ana I.
  • Puerta-Oteo, Raquel
  • Martínez-Sal, Joaquín
  • Passarelli, Vincenzo
  • Pérez-Torrente, Jesús J.
After pandemic, healthcare workers experienced a series of emotional and psychological disturbances that could impact their mental well-being. In this study, the feasibility of morphological characteristics of photoplethysmographic (PPG) waveform to quantify stress and depression level posed by COVID-19 in first-line healthcare workers is explored. Results show that higher stress and depression level are moderately correlated with large systolic amplitude and parameters that might indicate early wave reflection. These results suggest that an arterial stiffness, quantified with PPG morphological characteristics, could provide valuable information in assessing mental health
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Polymerization of phenylacetylene catalyzed by rhodium(<scp>i</scp>) complexes with <i>N</i>-functionalized N-heterocyclic carbene ligands

  • Angoy, Marta
  • Jiménez, M. Victoria
  • Lahoz, Fernando J.
  • Vispe, Eugenio
  • Pérez-Torrente, Jesús J.
A series of neutral [RhX(nbd)(κC-MeIm∩Z)] and cationic [Rh(nbd)(κ2C,N-MeIm∩Z)]+ (X = Cl, Br; MeIm = 3-methylimidazol-2-yliden-1-yl; ∩Z = N-functionalized wingtip; nbd = 2,5-norbornadiene) complexes featuring NHC ligands functionalized with a 1-aminopropyl, 3-dimethylaminopropyl, pyridin-2-ylmethyl, or quinolin-8-ylmethyl substituent have been prepared. These complexes efficiently catalyze the polymerization of phenylacetylene without base as a co-catalyst affording stereoregular polyphenylacetylenes of very high molar mass. Polymers of Mw up to 2 × 106 g mol−1 and moderate dispersity have been prepared with neutral chloro-complexes having aminopropyl wingtips. Catalyst precursors bearing functionalized NHC ligands with a flexible amino-alkyl wingtip are significantly more active than those having a heterocyclic substituent. These complexes are in general much more active than related compounds having N-functionalized phosphine ligands. Polymer characterization by SEC/MALS/DRI analysis has revealed the presence of a fraction of branched polymer of high molar mass in most samples obtained with catalysts having N-heterocyclic substituents at the NHC ligand. The N-donor function at the NHC ligand likely behaves as an internal base for the deprotonation of phenylacetylene to give the initiating alkynyl cationic [Rh(nbd)(C[triple bond, length as m-dash]C-Ph)(κC-MeIm∩ZH)]+ species. However, the participation of neutral alkynyl species [Rh(nbd)(C[triple bond, length as m-dash]C-Ph)(κC-MeIm∩Z)] should be considered in order to rationalize the notable catalytic activity of some neutral chloro-complexes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Synthesis and reactivity of an iridium complex based on a tridentate aminophosphano ligand

  • Palmese, M.
  • Pérez-Torrente, J. J.
  • Passarelli, V.
The iridium(iii) hydride compound IrH{¿3C, P, P'-(SiNP-H)}(CNtBu)2]PF6] (1PF6) was obtained by reaction of Ir(SiNP)(cod)]PF6] with CNtBu as the result of the intramolecular oxidative addition of the SiCH2-H bond to iridium(i) SiNP = Si(CH3)2{N(4-tolyl)PPh2}2, SiNP-H = CH2Si(CH3){N(4-tolyl)PPh2}2]. The mechanism of the reaction was investigated by NMR spectroscopy and DFT calculations showing that the pentacoordinated intermediate Ir(SiNP)(cod)(CNtBu)]PF6] (2PF6) forms in the first place and that further reacts with CNtBu, affording the square planar intermediate Ir(SiNP)(CNtBu)2]PF6] (3PF6) that finally undergoes the intramolecular oxidative addition of the SiCH2-H bond. The reactivity of 1PF6 was investigated. On one hand, the reaction of 1PF6 with N-chlorosuccinimide or N-bromosuccinimide provides the haloderivatives IrX{¿3C, P, P'-(SiNP-H)}(CNtBu)2]PF6] (X = Cl, 4PF6; Br, 5PF6), and the reaction of 5PF6 with AgPF6 in the presence of acetonitrile affords the solvato species Ir{¿3C, P, P'-(SiNP-H)}(CH3CN)(CNtBu)2]2+ (62+) isolated as the hexafluorophosphate salt. On the other hand, the reaction of 1PF6 with HBF4 gives the iridium(iii) compound IrH(CH2SiF2CH3)(HNP)2(CNtBu)2]BF4] (7BF4) as the result of the formal addition of hydrogen fluoride to the Si-N bonds of 1+ HNP = HN(4-tolyl)PPh2]. A similar outcome was observed in the reaction of 1PF6 with CF3COOH rendering 7PO2F2. In this case the intermediate IrH{¿2C, P-CH2SiMeFN(4-tolyl)PPh2}(HNP)(CNtBu)2]+ (8+) was observed and characterised in situ by NMR spectroscopy. DFT calculations suggests that the reaction goes through the sequential protonation of the nitrogen atom of the Si-N-P moiety followed by the formal addition of fluoride ion to silicon. Also, the crystal structures of SiNP, 1PF6, 4PF6 and 7BF4 have been determined by X-ray diffraction measurements. © 2022 The Royal Society of Chemistry
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Tailor-made poly(vinylidene sulfide)s by Rh(I)–NHC catalyzed regioselective thiol-yne click polymerization

  • Hermosilla, Pablo
  • Funes-Hernando, Daniel
  • Castarlenas, Ricardo
  • Di Giuseppe, Andrea
  • Azpíroz, Ramón
  • Vispe, Eugenio
  • Pérez-Torrente, Jesús J.
The [Rh(μ-Cl)(IPr)(η2-coe)]2/pyridine system efficiently catalyzes the polyhydrothiolation of a series of dialkynes with dithiols, producing sulfur-rich poly(vinylidene sulfide)s with a typical Mw in the range 20.000–124.000 and vinylidene content of 75–87%. A combination of flexible aliphatic dithiols, including 1,6-hexanedithiol and 2,2′-(ethylendioxy)diethanethiol, and the rigid aromatic dithiol 4,4′-thiobisbenzenethiol, with rigid aromatic dialkynes, 1,3-diethynylbenzene and 1,4-diethynylbenzene, and flexible dialkynes, including propargyl ether and 1,7-octadiyne, have been used to prepare poly(vinylidene sulfide)s. The copolymerization of flexible dithiols with rigid aromatic dialkynes or vice versa results in high molecular weight polymers, Mw up to 259.000, with low polydispersities. However, polyhidrothiolation of flexible dialkynes with flexible dithiols is much less efficient and usually results in the formation of oligomers. The interplay of the IPr and pyridine ligands on the RhCl(IPr)(py)(η2-coe) catalyst, which controls the regioselectivity of the alkyne insertion step towards the branched vinyl sulfide, is key in the preparation of these poly(vinylidene sulfide)s.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Synthesis of Ir Catalysts Featuring Amide-functionalized NHC Ligands and Survey of their Activity on Formic Acid Dehydrogenation

  • García-Abellán, Susana
  • Passarelli, Vincenzo
  • Iglesias, Manuel
2 a and 2 b, [Ir(CI)(COD)(NHC)] (COD=1,5-cyclooctadiene), have been prepared via transmetallation from NHC−Ag complexes. [Rh(CI)(COD)(NHC)] (4) was prepared analogously. [Ir({κ-C,N-(NHC-acetamide−1H)}(COD)] (3 c) has been synthesized via transmetallation from the deprotonated NHC−Ag complex. [IrCp*({κ-C,N-(NHC-acetamide−1H)}] (5) (Cp*=pentamethylcyclopentadienyl), has been obtained analogously. [Ir(CI)(CO)2(NHC)] (6) and [Ir({κ-C,N-(NHC-acetamide−1H)}(CO)2] (7) have been prepared by carbonylation of 2 b and 3 c, respectively. The catalytic activity of these complexes has been evaluated in the dehydrogenation of formic acid, under solventless conditions, in the presence of water as a cosolvent, and in a 5 : 2 HCOOH/Et3N mixture, with the best TOF values being obtained in the case of the latter. Stoichiometric experiments suggest COD hydrogenation as the preactivation step.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Iridium-(K2-NSi) catalyzed dehydrogenation of formic acid: effect of auxiliary ligands on the catalytic performance

  • Gómez-España, Alejandra
  • López-Morales, Jorge L.
  • Español-Sanchez, Belinda
  • García-Orduña, Pilar
  • Lahoz, Fernando J.
  • Iglesias, Manuel
  • Fernández-Alvarez, Francisco J.
IThe iridium(III) complexes [Ir(H)(Cl)(κ2-NSitBu2)(κ2-bipyMe2)] (2) and [Ir(H)(OTf)(κ2-NSitBu2)(κ2-bipyMe2)] (3) (NSitBu2 = {4-methylpyridine-2-yloxy}ditertbutylsilyl) have been synthesized and characterized including X-ray studies of 3. A comparative study of the catalytic activity of complexes 2, 3, [Ir(H)(OTf)(κ2-NSitBu2)(coe)] (4), and [Ir(H)(OTf)(κ2-NSitBu2)(PCy3)] (5) (0.1 mol%) as catalysts precursors for the solventless formic acid dehydrogenation (FADH) in the presence of Et3N (40 mol%) at 353 K has been performed. The highest activity (TOF5 min ≈ 3260 h−1) has been obtained with 3 at 373 K. However, at that temperature the FTIR spectra show traces of CO together with the desired products (H2 and CO2). Thus, the best performance was achieved at 353 K (TOF5 min ≈ 1210 h−1 and no observable CO). Kinetic studies at variable temperature show that the activation energy of the 3-catalyzed FADH process is 16.76 kcal mol−1. Kinetic isotopic effect (5 min) values of 1.6, 4.5, and 4.2 were obtained for the 3-catalyzed dehydrogenation of HCOOD, DCOOH, and DCOOD, respectively, at 353 K. The strong KIE found for DCOOH and DCOOD evidenced that the hydride transfer from the C–H bond of formic acid to the metal is the rate-determining step of the process.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Catalytic applications of zwitterionic transition metal compounds

  • Puerta-Oteo, Raquel
  • Ojeda-Amador, Ana I.
  • Jimenez, María Victoria
  • Perez-Torrente, Jesús J.
This frontiers article highlights recent developments on the application of transition metal-based zwitterionic complexes in catalysis. Recent applications of selected zwitterionic catalysts in polymerization reactions, including the carbonylative polymerization of cyclic ethers, carbon-carbon coupling reactions, the asymmetric hydrogenation of unfunctionalized olefins, and the hydrofunctionalization of alkenes are reviewed. In addition, advances in the field of hydrogenation/dehydrogenation reactions related to energy applications, including the hydrogenation of CO2 and the dehydrogenation of formic acid and N-heterocycles, the functionalization of CO2 with amines and hydrosilanes, and the valorization of polyfunctional bio-based feedstocks, such as the dehygrogenation of glycerol to lactic acid or the reduction of levulinic acid into gamma-valerolactone, are also described.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Origin of the Ir-Si bond shortening in Ir-NSiN complexes

  • García-Orduña Pilar
  • Fernández Israel
  • Oro Luis A.
  • Fernández-Alvarez Francisco J.
The Ir–Si bond distances reported for Ir-(fac-κ3-NSiNOPy) and Ir-(fac-κ3-NSiN4MeOPy) species (NSiNOPy = bis(pyridine-2-yloxy)methylsilyl and NSiN4MeOPy = bis(4-methyl-pyridine-2-yloxy)methylsily) are in the range of 2.220–2.235 Å. These values are in the lowest limit of the Ir–Si bond distances found in the Cambridge Structural Database (CSD). To understand the origin of such remarkable shortening, a computational study of the bonding situation of representative examples of Ir-(fac-κ3-NSiN) species has been carried out. It is found that the Ir–Si bond can be described as an electron-sharing (i.e. covalent) bond. Despite that, this bond is highly polarized and as a result, the contribution of the electrostatic attractions to the bonding is rather significant. Indeed, there exists a linear relationship (R2 = 0.97) between the Ir–Si bond distance and the extent of the computed electrostatic interactions, which indicates that the ionic contribution to the bonding is mainly responsible for the observed Ir–Si bond shortening.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Synthesis and characterization of Ir-(k2-NSi) Species Active toward the solventless hydrolysis of HSiMe(OSiMe3)2

  • Gómez España, Alejandra
  • García Orduña, Pilar
  • Guzmán, Jefferson
  • Fernández, Israel
  • Fernández Álvarez, Francisco J.
The reaction of [IrH(Cl)(κ2-NSitBu2)(coe)] (1) with 1 equiv of PCy3 (or PHtBu2) gives the species [IrH(Cl)(κ2-NSitBu2)(L)] (L = PCy3, 2a; PHtBu2, 2b), which reacts with 1 equiv of AgOTf to afford [IrH(OTf)(κ2-NSitBu2)(L)] (L = PCy3, 3a and PHtBu2, 3b). Complexes 2a, 2b, 3a, and 3b have been characterized by means of NMR spectroscopy and HR-MS. The solid-state structures of complexes 2a, 2b, and 3a have been determined by X-ray diffraction studies. The reversible coordination of water to 3a, 3b, and 4 to afford the corresponding adduct [IrH(OTf)(κ2-NSitBu2)(L)(H2O)] (L = PCy3, 3a-H2O; PHtBu2, 3b-H2O; coe, 4-H2O) has been demonstrated spectroscopically by NMR studies. The structure of complexes 3b-H2O and 4-H2O have been determined by X-ray diffraction studies. Computational analyses of the interaction between neutral [NSitBu2]• and [Ir(H)L(X)]• fragments in Ir-NSitBu2 species confirm the electron-sharing nature of the Ir–Si bond and the significant role of electrostatics in the interaction between the transition metal fragment and the κ2-NSitBu2 ligand. The activity of Ir-(κ2-NSitBu2) species as catalysts for the hydrolysis of HSiMe(OSiMe3)2 depends on the nature of the ancillary ligands. Thus, while the triflate derivatives are active, the related chloride species show no activity. The best catalytic performance has been obtained when using complexes 3a, with triflate and PCy3 ligands, as a catalyst precursor, which allows the selective obtention of the corresponding silanol.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Dehydrogenation of formic acid using iridium-NSi species as catalyst precursors

  • Guzmán, Jefferson
  • Urriolabeitia, Asier
  • Polo, Víctor
  • Fernández-Buenestado, Marta
  • Iglesias, Manuel
  • Fernández-Álvarez, Francisco J.
Using a low loading of the iridium(III) complexes [Ir(CF3SO3)(κ2-NSiiPr)2] (1) (NSiiPr = (4-methylpyridin-2-yloxy)diisopropylsilyl) and [{Ir(κ2-NSiMe)2}2(μ-CF3SO3)2] (2) (NSiMe = (4-methylpyridin-2-yloxy)dimethylsilyl) in the presence of Et3N, it has been possible to achieve the solventless selective dehydrogenation of formic acid. The best catalytic performance (TOF5 min ≈ 2900 h−1) has been achieved with 2 (0.1 mol%) and Et3N (40 mol% to FA) at 373 K. Kinetic studies at variable temperatures show that the activation energy of the 2-catalyzed process at 353 K is 22.8 ± 0.8 kcal mol−1. KIE values of 1.33, 2.86, and 3.33 were obtained for the 2-catalyzed dehydrogenation of HCOOD, DCOOH, and DCOOD, respectively, in the presence of 10 mol% of Et3N at 353 K. These data show that the activation of the C–H bond of FA is the rate-determining step of the process. A DFT mechanistic study for the catalytic cycle involving hydride abstraction from the formate anion by the metal, assisted by a molecule of formic acid, and heterolytic H2 formation has been performed. Moreover, the presence of Ir-formate intermediates was identified by means of NMR studies of the catalytic reactions in thf-d8 at 323 K. In all the cases, the decomposition of the catalyst to give unactive crystalline iridium NPs was observed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Metal-Ligand Cooperative Proton Transfer as an Efficient Trigger for Rhodium-NHC-Pyridonato Catalyzed gem-Specific Alkyne Dimerization

  • Galiana-Cameo M.
  • Urriolabeitia A.
  • Barrenas E.
  • Passarelli V.
  • Pérez-Torrente J.J.
  • Di Giuseppe A.
  • Polo V.
  • Castarlenas R.
The mononuclear square-planar Rh{¿2-X, N-(Xpy)}(¿2-coe)(IPr) (X = O, NH, NMe, S) complexes have been synthesized from the dinuclear precursor [Rh(µ-Cl)(IPr)( ¿2-coe)]2 and the corresponding 2-heteroatom-pyridinate salts. The Rh-NHC-pyridinato derivatives are highly efficient catalysts for gem-specific alkyne dimerization. Particularly, the chelating N, O-pyridonato complex displays turnover frequency levels of up 17 000 h-1 at room temperature. Mechanistic investigations and density functional theory calculations suggest a pyridonato-based metal-ligand cooperative proton transfer as responsible for the enhancement of catalytic activity. The initial deprotonation of a Rh-p-alkyne complex by the oxo-functionality of a ¿1-N-pyridonato moiety has been established to be the rate-limiting step, whereas the preferential protonation of the terminal position of a p-coordinated alkyne accounts for the exclusive observation of head-to-tail enynes. The catalytic cycle is closed by a very fast alkenyl-alkynyl reductive elimination. © 2021 American Chemical Society.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Efficient solventless dehydrogenation of formic acid by a CNC-based rhodium catalyst

  • Hermosilla, Pablo
  • Urriolabeitia, Asier
  • Iglesias, Manuel
  • Polo, Victor
  • Casado, Miguel A.
The complex (CNC)MesRh(PMe2Ph)]PF6 (1) has been found to be an effective catalyst for solventless formic acid (FA) dehydrogenation, affording exclusively H2 and CO2 as decomposition products. The effect of the addition of a base as a co-catalyst was studied, and it was found that HCOONa was the most efficient additive in terms of catalyst efficiency with a catalyst loading of 0.016 mol%, reaching TOFmax values up to 5869 h-1. Additionally, we observed that the addition of water dramatically increased the catalytic activity in FA dehydrogenation, yielding TOFmax values up to 10 150 h-1. Additionally, VT kinetic NMR experiments allowed us to estimate the activation energy (¿G‡ = 18.12 ± 1.17 kcal mol-1) of the FA dehydrogenation catalysed by 1. Stoichiometric NMR experiments, aimed to shed light on the nature of possible catalytic intermediates, allowed us to detect and further isolate the RhIII hydrido formate complex (CNC)MesRh(¿O-OC(O)H)(PMe2Ph)H]PF6 (2), which originates from an oxidative addition of FA to 1; additionally, we could detect a bis(hydrido) RhIII complex (CNC)MesRh(PMe2Ph)H2]PF6 (1-H2), which is another operative intermediate in the catalytic FA dehydrogenation by 1. DFT calculations performed on the catalytic FA dehydrogenation perfectly accounted for the gathered experimental data; the approach of a FA molecule to 1 leads to O-H oxidative addition producing the ¿O-formate intermediate 2, which subsequently undergoes a FA-assisted isomerization to the ¿H-formate species. Further hydride abstraction generates the dihydrido intermediate 1-H2, which releases H2 upon interaction with another FA molecule closing the catalytic cycle. The rate-limiting step in the catalytic process corresponds to the hydride abstraction step, which agrees with the KIE values estimated by NMR experiments. © 2022 The Royal Society of Chemistry
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Deciphering pyramidanes: a quantum chemical topology approach

  • Vidal, Lucía
  • Barrena-Espés, Daniel
  • Echeverría, Jorge
  • Munárriz, Julen
  • Pendás, Ángel Martín
C[C4H4], the simplest compound of the [4]‐pyramidane family, has so far eluded experimental characterization, although several of its analogs, E[C4(SiMe3)4] in which the E apex atom is a tetrel group element, have been successfully prepared. The non‐classical bonding mode of E, similar to that found in propellanes, has prompted a considerable number of theoretical studies to unravel the nature of the apex‐base interaction. Here, we contribute to this knowledge by analyzing the electron localization function (ELF) and classical QTAIM descriptors; as well the statistical distribution of electrons in atomic regions by means of the so‐called electron distribution functions (EDFs), calculation of multicenter indices (MCI) as aromaticity descriptors and by performing orbital invariant energy decompositions with the interacting quantum atoms (IQA) approach on a series of E[C4(SiMe3)4] compounds. We find that the bonding evolves from covalent to electrostatic as E changes from C to Pb, with an anomaly when E=Si, which is shown to be the most charged moiety, compatible with an aromatic [C4(SiMe3)4]2− scaffold in the pyramidane base.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Nucleophilic Reactivity at a=CH Arm of a Lutidine-Based CNC/Rh System: Unusual Alkyne and CO2Activation

  • Hermosilla, P.
  • García-Orduña, P.
  • Sanz Miguel, P. J.
  • Polo, V.
  • Casado, M. A.
Reaction of an amido pincer complex (CNC)*Rh(CO)] (1) (CNC* is the deprotonated form of CNC) with carbon dioxide gave a neutral complex (CNC-CO2)Mes*Rh(CO)] (2), which is the result of a C-C bond-forming reaction between the deprotonated arm of the CNC* ligand and CO2. The molecular structure of 2 showed a zwitterionic complex, where the CO2 moiety is covalently connected to the former =CH arm of the CNC* pincer ligand. The unusual structure of 1 allowed us to explore the reactivity of the CO2 moiety with selected primary amines RNH2 (benzylamine and ammonia), which afforded cationic complexes (CNC)MesRh(CO)]HRNC(O)O] (R = Bz (3), H (4)). Compounds 3 and 4 are the result of a C-N coupling between the incoming amine and the CO2 fragment covalently connected to the pincer ligand in 2, a process that involves protonation of the "CH-CO2"fragment in 2 from the respective amines. Once revealed the nucleophilic character of the =CH fragment in 1, we explored its reactivity with alkynes, a study that enlightened a novel reactivity trend in alkyne activation. Reaction of 1 with terminal alkynes RCCH (R = Ph, 2-py, 4-C6H4-CF3) yielded neutral complexes (CNC-CH=CHR)Mes*Rh(CO)] (R = Ph (5), 2-py (6), 4-C6H4-CF3 (7)) in good yields. Deuterium labeling experiments with PhCCD confirmed that complex 5 is the product of a formal insertion of the alkyne into the C(sp2)-H bond of the deprotonated arm in 1. This structural proposal was further confirmed by the X-ray molecular structure of phenyl complex 5, which showed the alkyne covalently linked to the pincer ligand. Besides, this novel transformation was analyzed by DFT methods and showed a metal-ligand cooperative mechanism, based on the initial electrophilic attack of the alkyne to the =CH arm of the CNCMes* ligand (making a new C-C bond) followed by the action of a protic base (HN(SiMe3)2), which is able to perform a proton rearrangement that leads to the final product 5. © 2022 American Chemical Society.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Rh Complexes with Pincer Carbene CNC Lutidine-Based Ligands: Reactivity Studies toward H2 Addition

  • Hermosilla P.
  • García-Orduña P.
  • Lahoz F.J.
  • Polo V.
  • Casado M.A.
Lutidine-based NHCs pincer precursors CNCMe and CNCMes were combined with [Rh(acac)(nbd)] (acac = acetylacetonate; nbd = 2, 5-norbornadiene) in the presence of Cs2CO3 to yield complexes [(CNC)MeRh(nbd)]PF6 (3) and [(CNC)MesRh(NCMe)]PF6 (4), respectively. While in 3, the nbd diolefin remains coordinated, in 4, the voluminous mesityl ligands induce nbd decoordination, so acetonitrile stabilizes Rh(I) adduct 4, which in turn undergoes substitution reactions with a number of neutral ligands to produce cationic complexes [(CNC)MesRh(L)]PF6 (L = CO (5), PMe2Ph (6), PEt3 (7), C2H4 (8)). These complexes have been studied through VT NMR measurements and the molecular structures by X-ray crystallography in the case of adducts 4-7. Deprotonation reactions on cationic complexes 3-6 with hard bases yielded the corresponding neutral complexes [(CNC)*MeRh(nbd)] (9) and mesityl derivatives [(CNC)*MesRh(L)] (L = NCCH3 (10), CO (11), PMe2Ph (12)), all of which are dearomatized complexes due to the deprotonation of one of the methylene arms, a situation confirmed by the X-ray molecular structure of carbonyl adduct 5. We studied the reactivity toward dihydrogen with neutral adducts 11 and 12. The electron rich phosphane 12 adds H2 through oxidative addition, affording the bis(hydrido) Rh(III) complex [(CNC)*MesRh(PMe2Ph)H2] (14). However, the carbonyl adduct 11 reacts with H2 in a different way, so that the central pyridinic ring becomes hydrogenated, breaking the aromaticity and leading to complex [(CNC-H2)*MesRh(CO)] (13), isolated as a mixture of two isomers. DFT studies were carried out in order to establish the mechanisms followed on these hydrogenations, finding that, while the phosphane adduct reacts following an oxidative addition mechanism, the carbonyl complex follows a more complex base-induced profile due to the instability of hydride carbonyl species. © 2021 American Chemical Society.