Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photocatalytic activity in the in-flow degradation of NO on porous TiO2 –coated glasses from hybrid inorganic–organic thin films prepared by a combined ALD/MLD deposition strategy

  • Azpíroz, Ramón
  • Borraz Casanova, Marina
  • González del Rosal, Aída
  • Mansilla, Catalina
  • Iglesias, Manuel
  • Pérez-Torrente, Jesús J.
This article belongs to the Special Issue Atomic Layer Deposition for the Synthesis and Application of Thin Films., A combined ALD/MLD (where ALD and MLD stand for atomic and molecular layer deposition, respectively) deposition strategy using TiCl4, H2O and HQ (hydroquinone) as precursors has been applied for the preparation of inorganic–organic thin films on soda-lime glasses. The alternate deposition of TiO2 layers, by pulsing TiCl4/H2O (ALD), and hybrid layers, using TiCl4/HQ (MLD), results in the formation of thin films that are precursors for porous TiO2-coatings after removal of the HQ template by annealing. The coated-glassed show good photocatalytic activity in the degradation of NO with up to 15% reduction of NO concentration in three successive photocatalytic cycles of 5 h each. Surface Scanning Electron Microscopy (SEM) images show that the TiO2-coating is composed of large grains that are made up of finer subgrains resulting in a porous structure with an average pore size of 3–4 nm. Transmission Electron Microscopy (TEM) images show two regions, a porous columnar structure on top and a denser region over the glass substrate. Energy Dispersive X-Ray (EDX) analysis, nanocrystal electron diffraction and Raman spectroscopy confirm the presence of the anatase phase, which, together with the porosity of the material, accounts for the observed photocatalytic activity., This research was funded by the Spanish Ministerio de Ciencia e Innovación under the project RTC-2017-6504-5 (MCIU/AEI/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In-flow photocatalytic oxidation of NO on glasses coated with nanocolumnar porous TiO2 thin films prepared by reactive sputtering

  • Azpíroz, Ramón
  • Carretero, Enrique
  • Cueva, Ana
  • González del Rosal, Aída
  • Iglesias, Manuel
  • Pérez-Torrente, Jesús J.
The magnetron sputtering technique has been successfully employed for the preparation of porous TiO2 thin films on soda-lime glasses by means of an oblique angle deposition strategy. The morphology of the thin layers is affected by the deposition parameters, such as, the angle with respect to the target, applied power, total pressure, oxygen pressure and deposition time. It has been shown that 60–65° angles, lead to a compromise between the porosity, the level of oxidation and the thickness of the film. High total pressures of the deposition process result in less dense coatings of greater porosity. Moreover, the oxygen flow during the deposition process must be carefully adjusted for each set of deposition conditions, in order to achieve an optimum degree of oxidation. The evaluation of coated-glasses in the in-flow photocatalytic oxidation of nitrogen oxide has shown that the presence of a porous film is essential to achieve photocatalytic activity. The best performing coated-glass was able to reduce the NO concentration ca. 20% for 5 h. SEM and TEM images of this film show a microstructure composed of nanometric grains and a tilted columnar structure. Nanocrystal electron diffraction, XRD and Raman spectroscopy have confirmed the deposition of TiO2 anatase., We gratefully acknowledge financial support from the Spanish Ministerio de Ciencia e Innovación, under the project RTC-2017-6504-5 (MCIU/AEI/FEDER, UE), and the “Departamento de Ciencia, Universidad y Sociedad del Conocimiento del Gobierno de Aragón” (groups E42_20R and T20_20R). The authors gratefully acknowledge the continued support from the company Ariño Duglass, Catedra Ariño Duglass and the Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza. Authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node “Laboratorio de Microscopias Avanzadas (LMA)” at “Universidad de Zaragoza”., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Photocatalytic activity in the in-flow degradation of NO on porous TiO2 –coated glasses from hybrid inorganic–organic thin films prepared by a combined ALD/MLD deposition strategy

  • Azpiroz, R.
  • Borraz, M.
  • González, A.
  • Mansilla, C.
  • Iglesias, M.
  • Pérez Torrente, J. J.
A combined ALD/MLD (where ALD and MLD stand for atomic and molecular layer deposition, respectively) deposition strategy using TiCl4, H2 O and HQ (hydroquinone) as precursors has been applied for the preparation of inorganic–organic thin films on soda-lime glasses. The alternate deposition of TiO2 layers, by pulsing TiCl4 /H2 O (ALD), and hybrid layers, using TiCl4 /HQ (MLD), results in the formation of thin films that are precursors for porous TiO2-coatings after removal of the HQ template by annealing. The coated-glassed show good photocatalytic activity in the degradation of NO with up to 15% reduction of NO concentration in three successive photocatalytic cycles of 5 h each. Surface Scanning Electron Microscopy (SEM) images show that the TiO2-coating is composed of large grains that are made up of finer subgrains resulting in a porous structure with an average pore size of 3–4 nm. Transmission Electron Microscopy (TEM) images show two regions, a porous columnar structure on top and a denser region over the glass substrate. Energy Dispersive X-Ray (EDX) analysis, nanocrystal electron diffraction and Raman spectroscopy confirm the presence of the anatase phase, which, together with the porosity of the material, accounts for the observed photocatalytic activity. © 2022 by the authors. Licensee MDPI, Basel, Switzerland.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Study of optical, thermal and radio frequency properties of low emissivity coatings with frequency selective surfaces

  • Alcain, R
  • Carretero, E
  • Chueca, R
  • Heras, C
  • Salinas, I.
The use of frequency selective surfaces (FSSs) defined on railcar windows with a metallic low-e coating to improve the reception of mobile communications signals is becoming ever more common. The proximity of the glass to the passenger in this scenario has introduced a new parameter to consider, aesthetics. This paper presents a complete study of the development of a FSS defined by laser ablation, considering all current requirements. The fabricated samples will be characterized in the optical and radiofrequency ranges of the spectrum. Also, by means of an electron microscope, the chemical elements of each area of the samples will be quantified, in order to study the ablation process. New samples will be made using these parameters, and its performance according to specifications verified. These data will be correlated, using digital image processing, to the aesthetic impact of the engraved FSS, as confirmation of the optimal laser configuration.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

In-flow photocatalytic oxidation of NO on glasses coated with nanocolumnar porous TiO2 thin films prepared by reactive sputtering

  • Azpiroz, Ramón
  • Carretero, Enrique
  • Cueva, Ana
  • González, Aida
  • Iglesias, Manuel
  • Pérez-Torrente, Jesús J.
The magnetron sputtering technique has been successfully employed for the preparation of porous TiO2 thin films on soda-lime glasses by means of an oblique angle deposition strategy. The morphology of the thin layers is affected by the deposition parameters, such as, the angle with respect to the target, applied power, total pressure, oxygen pressure and deposition time. It has been shown that 60–65° angles, lead to a compromise between the porosity, the level of oxidation and the thickness of the film. High total pressures of the deposition process result in less dense coatings of greater porosity. Moreover, the oxygen flow during the deposition process must be carefully adjusted for each set of deposition conditions, in order to achieve an optimum degree of oxidation. The evaluation of coated-glasses in the in-flow photocatalytic oxidation of nitrogen oxide has shown that the presence of a porous film is essential to achieve photocatalytic activity. The best performing coated-glass was able to reduce the NO concentration ca. 20% for 5 h. SEM and TEM images of this film show a microstructure composed of nanometric grains and a tilted columnar structure. Nanocrystal electron diffraction, XRD and Raman spectroscopy have confirmed the deposition of TiO2 anatase.