Pasar al contenido principal

SISTEMAS CATALITICOS NANO(HIBRIDOS) PARA LA PRODUCCION SOSTENIBLE DE HIDROGENO Y LA VALORIZACION DE CO2

CTQ2015-64261-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario UNIVERSIDAD AUTONOMA DE BARCELONA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis of 0D to 3D hybrid-carbon nanomaterials carrying platinum(0) nanoparticles: Towards the electrocatalytic determination of methylparabens at ultra-trace levels

  • Muñoz Martín, José M.
  • Álvarez Prada, Ignacio
  • Lopez Lopez, Eric
  • Escriche, Lluís
  • Romero, Nuria
  • Sala, Xavier
  • Mas Torrent, Marta
  • García Antón, Jordi
A generic synthetic methodology has been applied for functionalizing four conducting carbon nanoallotropes, such as 0D carbon nanohorns (CNHs), 1D carbon nanotubes (CNTs), 2D reduced graphene oxide (rGO) and 3D graphite (GP) with platinum(0) nanoparticles (Pt–NP), and exploited towards the electrocatalytic determination of methylparaben (MeP), which has been classified as a potential endocrine-disrupting chemical. After an accurate physical, electrochemical and electroanalytical characterization, the hybrid Pt–NP@CNTs yields detection limits at nM levels, rather than the μM levels obtained with the rest of carbon homologous because of the optimum carbon/nanoparticle composition ratio. The proposed electrochemical sensing system has also been successfully validated by comparison with the standard bench-top chromatographic tool (HPLC), demonstrating its feasibility for MeP quantification in real cosmetic samples at ultra-trace levels. According to the outstanding performance of the hybrid Pt–NP@CNTs electrochemical platform, it can be regarded as a potential alternative to the conventional HPLC technique for the development of rapid, straightforward, cost-effective, reproducible and highly sensitive electrochemical sensors to be exploited in pharmacological, biomedical and environmental fields., This work was funded by the national DGI project FANCYCTQ2016-80030-R and the MINECO/FEDER project CTQ2015-64261-R, the Generalitat de Catalunya (2017-SGR-918) and the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centers of Excellence in R&D (SEV-2015-0496). The authors also than the Networking Research Center on Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN). Dr. J. Muñoz gratefully acknowledges the “Juan de la Cierva” programme. Dr. J. García-Antón acknowledges the Serra Húnter Program. I. Álvarez-Prada thanks the UAB for the PhD grant. Dr. J. Muñoz and I. Álvarez-Prada contributed equally to this work., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

TiO2-mediated visible-light-driven hydrogen evolution by ligand-capped Ru nanoparticles

  • Romero Fernández, Nuria|||0000-0002-2704-7779
  • Barrach Guerra, Renan|||0000-0002-2034-4201
  • Gil Jiménez, Laia|||0000-0003-0870-4064
  • Drouet, Samuel|||0000-0003-1814-7556
  • Salmeron-Sànchez, Ivan
  • Illa, Ona|||0000-0001-7390-4893
  • Philippot, Karine|||0000-0002-8965-825X
  • Natali, Mirco|||0000-0002-6638-978X
  • García-Antón, Jordi|||0000-0002-2401-0401
  • Sala, Xavier|||0000-0002-7779-6313
Ru nanomaterials have recently emerged as potential substitutes for classical Pt-based cathodes for the hydrogen evolution reaction (HER). In this regard, nanoparticle surface-functionalization through the so-called organometallic approach is a promising strategy towards synthesizing tailored highly active and durable HER (photo)electrocatalysts with limitless tunability. Herein, efficient (turnover numbers over 480 molH2 molRu-1 and a turnover frequency of 21.5 molH2 h-1 molRu-1; apparent quantum yield of 1.3%) and durable (.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Organocatalytic vs. Ru-based electrochemical hydrogenation of nitrobenzene in competition with the hydrogen evolution reaction

  • Moya, Alicia|||0000-0002-0328-012X
  • Creus, Jordi|||0000-0001-5555-8122
  • Romero Fernández, Nuria|||0000-0002-2704-7779
  • Aleman Lara, Jose Julian|||0000-0003-0164-1777
  • Solans-Monfort, Xavier|||0000-0002-2172-3895
  • Philippot, Karine|||0000-0002-8965-825X
  • García-Antón, Jordi|||0000-0002-2401-0401
  • Sala, Xavier|||0000-0002-7779-6313
  • Mas Balleste, Ruben|||0000-0003-1988-8700
The electrochemical reduction of organic contaminants allows their removal from water. In this contribution, the electrocatalytic hydrogenation of nitrobenzene is studied using both oxidized carbon fibres and ruthenium nanoparticles supported on unmodified carbon fibres as catalysts. The two systems produce azoxynitrobenzene as the main product, while aniline is only observed in minor quantities. Although PhNO2 hydrogenation is the favoured reaction, the hydrogen evolution reaction (HER) competes in both systems under catalytic conditions. H2 formation occurs in larger amounts when using the Ru nanoparticle based catalyst. While similar reaction outputs were observed for both catalytic systems, DFT calculations revealed some significant differences related to distinct interactions between the catalytic material and the organic substrates or products, which could pave the way for the design of new catalytic materials.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Synthesis of 0D to 3D hybrid-carbon nanomaterials carrying platinum(0) nanoparticles, towards the electrocatalytic determination of methylparabens at ultra-trace levels

  • Muñoz, Jose|||0000-0001-9529-6980
  • Alvarez Prada, Luis Ignacio
  • Lopez-Lopez, Eric
  • Escriche, Lluís|||0000-0003-2562-5034
  • Romero Fernández, Nuria|||0000-0002-2704-7779
  • Sala, Xavier|||0000-0002-7779-6313
  • Mas-Torrent, Marta|||0000-0002-1586-005X
  • García-Antón, Jordi|||0000-0002-2401-0401
A generic synthetic methodology has been applied for functionalizing four conducting carbon nanoallotropes, such as 0D carbon nanohorns (CNHs), 1D carbon nanotubes (CNTs), 2D reduced graphene oxide (rGO) and 3D graphite (GP) with platinum(0) nanoparticles (Pt-NP), and exploited towards the electrocatalytic determination of methylparaben (MeP), which has been classified as a potential endocrine-disrupting chemical. After an accurate physical, electrochemical and electroanalytical characterization, the hybrid Pt-NP@CNTs yields detection limits at nM levels, rather than the μM levels obtained with the rest of carbon homologous because of the optimum carbon/nanoparticle composition ratio. The proposed electrochemical sensing system has also been successfully validated by comparison with the standard bench-top chromatographic tool (HPLC), demonstrating its feasibility for MeP quantification in real cosmetic samples at ultra-trace levels. According to the outstanding performance of the hybrid Pt-NP@CNTs electrochemical platform, it can be regarded as a potential alternative to the conventional HPLC technique for the development of rapid, straightforward, cost-effective, reproducible and highly sensitive electrochemical sensors to be exploited in pharmacological, biomedical and environmental fields.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ruthenium nanoparticles supported on carbon-based nanoallotropes as co-catalyst to enhance the photocatalytic hydrogen evolution activity of carbon nitride

  • Alvarez Prada, Luis Ignacio
  • Peral, Daniel|||0000-0003-4550-6809
  • Song, Mary
  • Muñoz, Jose|||0000-0001-9529-6980
  • Romero Fernández, Nuria|||0000-0002-2704-7779
  • Escriche, Lluís|||0000-0003-2562-5034
  • Acharjya, Amitava
  • Thomas, Arne
  • Schomäcker, Reinhard
  • Schwarze, Michael|||0000-0002-5632-603X
  • Sala, Xavier|||0000-0002-7779-6313
  • Tasbihi, Minoo|||0000-0001-8623-4323
  • García-Antón, Jordi|||0000-0002-2401-0401
Development of competent and cost-effective materials for hydrogen evolution reaction (HER) has been attracting great attention since hydrogen is hailed as a promising environmentally friendly energy source to reduce the greenhouse emissions. Herein, Ru(0) nanoparticles (RuNPs) have been stabilized onto the surface of four different conducting carbon nanomaterials (CNMs) from 0D to 3D, such as 0D carbon nanohorns (CNH), 1D single-walled carbon nanotubes (CNTs), 2D reduced graphene oxide (rGO) and 3D graphite (GP), for their use in the photocatalytic HER. For this aim, the resulting RuNP@CNMs where physically mixed with mesoporous graphitic carbon nitride (mpg-CN) in an optimum composition ratio to maximize the photocatalytic HER activity. Notably, the resulting four hybrid RuNPs@CNM/mpg-CN materials showed an outstanding increase in the hydrogen evolution reaction (HER) when compared with the pristine mesoporous graphitic carbon nitride without co-catalyst. A comparison on the photocatalytic activity of the four hybrid RuNPs@CNMs physically mixed with mpg-CN and a deep study on the fate of the nanohybrids after catalysis are presented.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Dissimilar catalytic behavior of molecular or colloidal palladium systems with a new NHC ligand

  • Gómez-Villarraga, Fernando
  • De Tovar, Jonathan|||0000-0003-1106-8003
  • Guerrero, Miguel|||0000-0001-8350-8261
  • Nolis, Pau|||0000-0003-2360-1709
  • Parella Coll, Teodor|||0000-0002-1914-2709
  • Lecante, Pierre|||0000-0001-6337-6855
  • Romero Fernández, Nuria|||0000-0002-2704-7779
  • Escriche, Lluís|||0000-0003-2562-5034
  • Bofill, Roger|||0000-0002-8888-1871
  • Ros i Badosa, Josep|||0000-0002-2391-2403
  • Sala, Xavier|||0000-0002-7779-6313
  • Philippot, Karine|||0000-0002-8965-825X
  • García-Antón, Jordi|||0000-0002-2401-0401
In this work, we describe the synthesis of a new N-heterocyclic carbene (NHC) ligand, derived from a hybrid pyrazole-imidazolium scaffold, namely 1-[2-(3,5-dimethylpyrazol-1-yl)ethyl]-3-((S)-1-phenylethyl)-3H-imidazol-2-ylidene (L). This ligand has been used as a stabilizer for the organometallic synthesis of palladium(0) nanoparticles (Pd NPs). L presents a better stabilizing effect than its pre-carbenic HLCl counterpart, allowing the formation of isolated Pd NPs while HLCl yields aggregated ones. Additionally, molecular Pd(ii) coordination compounds of L and HLCl were synthesized and characterized to better understand the coordination modes of these ligands. Both molecular and colloidal Pd systems have been further tested in catalytic C-C coupling processes. Three different types of reactions have been observed depending on the catalytic system: (i) the Suzuki-Miyaura reaction takes place with Pd molecular complexes; (ii) a secondary reaction, the dehalogenation of the substrate, is always detected and (iii) the C-C homocoupling between two molecules of bromoarenes is observed with colloidal catalysts.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Synthesis and Isomeric Analysis of RuII Complexes Bearing Pentadentate Scaffolds

  • Gil-Sepulcre, Marcos|||0000-0002-2839-8108
  • Axelson, Jordan C.
  • Aguilo Carreras, Joan
  • Solà-Hernández, Lluís
  • Francàs, Laia|||0000-0001-9171-6247
  • Poater, Albert|||0000-0002-8997-2599
  • Blancafort, Lluís|||0000-0002-0003-5540
  • Benet-Buchholz, Jordi|||0000-0003-3984-3550
  • Guirado, Gonzalo|||0000-0003-2128-7007
  • Escriche, Lluís|||0000-0003-2562-5034
  • Llobet Dalmases, Antoni|||0000-0002-6176-5272
  • Bofill, Roger|||0000-0002-8888-1871
  • Sala, Xavier|||0000-0002-7779-6313
A RuII-pentadentate polypyridyl complex [RuII(κ-N5-bpy2PYMe)Cl]+ (1+, bpy2PYMe = 1-(2-pyridyl)-1,1-bis(6-2,2'-bipyridyl)ethane) and its aqua derivative [RuII(κ-N5-bpy2PYMe)(H2O)]2+ (22+) were synthesized and characterized by experimental and computational methods. In MeOH, 1+ exists as two isomers in different proportions, cis (70%) and trans (30%), which are interconverted under thermal and photochemical conditions by a sequence of processes: chlorido decoordination, decoordination/recoordination of a pyridyl group, and chlorido recoordination. Under oxidative conditions in dichloromethane, trans-12+ generates a [RuIII(κ-N4-bpy2PYMe)Cl2]+ intermediate after the exchange of a pyridyl ligand by a Cl- counterion, which explains the trans/cis isomerization observed when the system is taken back to Ru(II). On the contrary, cis-12+ is in direct equilibrium with trans-12+, with absence of the κ-N4-bis-chlorido RuIII-intermediate. All these equilibria were modeled by density functional theory calculations. Interestingly, the aqua derivative is obtained as a pure trans-[RuII(κ-N5-bpy2PYMe)(H2O)]2+ isomer (trans-22+), while the addition of a methyl substituent to a single bpy of the pentadentate ligand leads to the formation of a single cis isomer for both chlorido and aqua derivatives [RuII(κ-N5-bpy(bpyMe)PYMe)Cl]+ (3+) and [RuII(κ-N5-bpy(bpyMe)PYMe)(H2O)]2+ (42+) due to the steric constraints imposed by the modified ligand. This system was also structurally and electrochemically compared to the previously reported [RuII(PY5Me2)X]n+ system (X = Cl, n = 1 (5+); X = H2O, n = 2 (62+)), which also contains a κ-N5-RuII coordination environment, and to the newly synthesized [RuII(PY4Im)X]n+ complexes (X = Cl, n = 1 (7+); X = H2O, n = 2 (82+)), which possess an electron-rich Hκ-N4C-RuII site due to the replacement of a pyridyl group by an imidazolic carbene.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

The role of catalyst-support interactions in oxygen evolution anodes based on Co(OH)2 nanoparticles and carbon microfibers

  • Mallón Pernia, Laura|||0000-0002-7738-0844
  • Romero Fernández, Nuria|||0000-0002-2704-7779
  • Jiménez, Alicia
  • Martín Morales, Elena|||0000-0002-1363-7946
  • Aleman Lara, Jose Julian|||0000-0003-0164-1777
  • Mas Balleste, Ruben|||0000-0003-1988-8700
  • Bofill, Roger|||0000-0002-8888-1871
  • Philippot, Karine|||0000-0002-8965-825X
  • García-Antón, Jordi|||0000-0002-2401-0401
  • Sala, Xavier|||0000-0002-7779-6313
The performance of OER anodes based on supported nanocatalysts is highly dependent on the interactions taking place at the interface between the nanocatalyst and the employed conductive support. Herein, the versatility offered by the organometallic approach for the synthesis of metal-based nanostructures allowed preparing electrodes of tailored nanocatalyst-support interactions. A set of OER working electrodes based on Co(OH)2 nanoparticles (NPs) and carbon microfibers (CFs) were prepared. The so-obtained systems differ in either the stabilizer present at the surface of the NPs (THF or 1-heptanol), the surface functionalization of the used CFs (bare CFs or oxidized-CFs) or the growth of the NPs in the presence (in situ) or the absence (ex situ) of the carbonaceous support. Correlation of a detailed structural and compositional analysis with the electroactivity of the tested nanomaterials allows extracting valuable insights about the influence of the metal-support interface on the OER performance of the studied anodes.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ruthenium nanoparticles for catalytic water splitting, Ruthenium-based nanoparticles for catalytic water splitting

  • Creus, Jordi|||0000-0001-5555-8122
  • De Tovar, Jonathan|||0000-0003-1106-8003
  • Romero Fernández, Nuria|||0000-0002-2704-7779
  • García-Antón, Jordi|||0000-0002-2401-0401
  • Philippot, Karine|||0000-0002-8965-825X
  • Bofill, Roger|||0000-0002-8888-1871
  • Sala, Xavier|||0000-0002-7779-6313
Both global warming and limited fossil resources make the transition from fossil to solar fuels an urgent matter. In this regard, the splitting of water activated by sunlight is a sustainable and carbon-free new energy conversion scheme able to produce efficient technological devices. The availability of appropriate catalysts is essential for the proper kinetics of the two key processes involved, namely, the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER). During the last decade, ruthenium nanoparticle derivatives have emerged as true potential substitutes for the state-of-the-art platinum and iridium oxide species for the HER and OER, respectively. Thus, after a summary of the most common methods for catalyst benchmarking, this review covers the most significant developments of ruthenium-based nanoparticles used as catalysts for the water-splitting process. Furthermore, the key factors that govern the catalytic performance of these nanocatalysts are discussed in view of future research directions.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ruthenium nanoparticles supported on carbon microfibers for hydrogen evolution electrocatalysis, Ruthenium nanoparticles supported onto carbon microfibers for hydrogen evolution electrocatalysis

  • Creus, Jordi|||0000-0001-5555-8122
  • Mallón Pernia, Laura|||0000-0002-7738-0844
  • Romero Fernández, Nuria|||0000-0002-2704-7779
  • Bofill, Roger|||0000-0002-8888-1871
  • Moya, Alicia|||0000-0002-0328-012X
  • Fierro, J.L.G.|||0000-0002-6880-3737
  • Mas Balleste, Ruben|||0000-0003-1988-8700
  • Sala, Xavier|||0000-0002-7779-6313
  • Philippot, Karine|||0000-0002-8965-825X
  • García-Antón, Jordi|||0000-0002-2401-0401
Four different cathodes for the hydrogen evolution reaction (HER) have been developed by the decoration of commercial carbon microfibers with Ru nanoparticles (Ru NPs). Two types of carbon fibers have been used: pristine, as-received, carbon fibers (pCF) and carbon fibers modified by an oxidative treatment that led to the functionalization of their surface with carboxylic groups (fCF). The decoration of these CFs with Ru NPs has been performed by two different methodologies based on the organometallic approach: direct synthesis of Ru NPs on top of the CFs (in-situ Ru NPs) or impregnation of the CFs with a colloidal solution of preformed Ru NPs stabilized with 4-phenylpyridine (RuPP NPs; ex-situ Ru NPs). The electrocatalytic performance of these four cathodes (ex-situ RuPP@pCF and RuPP@fCF; in-situ Ru@pCF and Ru@fCF) for the HER has been studied in acidic conditions. The results obtained show that both the nature of the NPs and of the carbon fibers play a key role on the stability and activity of the hybrid electrodes: ex-situ prepared Ru NPs afford better activities at lower overpotentials and better stabilities than those formed in-situ. Among the two ex-situ systems, an enhancement of the stability with pCF is observed, that may arise from more effective π-interactions between 4-phenylpyridine ligand and the surface of these carbon fibers. This interaction is somehow disfavored with fCF due to the presence of the surface carboxylic groups.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ligand-Capped Ru Nanoparticles as Efficient Electrocatalyst for the Hydrogen Evolution Reaction

  • Creus, Jordi|||0000-0001-5555-8122
  • Drouet, Samuel|||0000-0003-1814-7556
  • Suriñach, Santiago|||0000-0001-8125-0594
  • Lecante, Pierre|||0000-0001-6337-6855
  • Collière, Vincent
  • Poteau, Romuald|||0000-0003-4338-174X
  • Philippot, Karine|||0000-0002-8965-825X
  • García-Antón, Jordi|||0000-0002-2401-0401
  • Sala, Xavier|||0000-0002-7779-6313
Multielectron reductions such as the hydrogen evolution reaction (HER) play an important role in the development of nowadays energy economy. Herein, the application of the organometallic approach as synthetic method allows obtaining very small, ligand-capped but also highly active ruthenium nanoparticles (RuNPs) for the HER in both acidic and basic media. When deposited onto glassy carbon, the catalytic activity of this nanomaterial in 1 M H2SO4 solution is highly dependent on the oxidation state of the NPs surface, with metallic Ru sites being clearly more active than RuO2 ones. In sharp contrast, in 1 M NaOH as electrolyte, the original Ru/RuO2 mixture is maintained even under reductive conditions. Estimation of surface active sites and electrochemically active surface area (ECSA) allowed benchmarking this catalytic system, confirming its leading performance among HER electrocatalysts reported at both acidic and basic pH. Thus, in 1 M NaOH condition, it displays lower overpotentials (η0 ≈ 0 mV, η10 = 25 mV) than those of commercial Pt/C and Ruthenium black (Rub), and also fairly outperforms them in short- and long-term stability tests. In 1 M H2SO4 solution, it clearly outdoes commercial Rub and is competitive or even superior to commercial Pt/C, working at very low overpotentials (η0 ≈ 0 mV, η10 = 20 mV) with a Tafel slope of 29 mV·dec-1, achieving TOFs as high as 17 s-1 at η = 100 mV and reaching a current density of |j| = 10 mA·cm-2 for at least 12 h without any sign of deactivation.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Light-driven water oxidation using hybrid photosensitizer-decorated Co3O4 nanoparticles

  • De Tovar, Jonathan|||0000-0003-1106-8003
  • Romero Fernández, Nuria|||0000-0002-2704-7779
  • Denisov, Sergey A.|||0000-0001-7881-1979
  • Bofill, Roger|||0000-0002-8888-1871
  • Gimbert-Suriñach, Carolina|||0000-0002-4412-7607
  • Ciuculescu-Pradines, Diana|||0000-0002-7953-232X
  • Drouet, Samuel|||0000-0003-1814-7556
  • Llobet Dalmases, Antoni|||0000-0002-6176-5272
  • Lecante, Pierre|||0000-0001-6337-6855
  • Collière, Vincen
  • Freixa, Zoraida|||0000-0002-2044-2725
  • McClenaghan, Nathan|||0000-0003-0285-1741
  • Amiens, Catherine|||0000-0002-9088-1635
  • García-Antón, Jordi|||0000-0002-2401-0401
  • Philippot, Karine|||0000-0002-8965-825X
  • Sala, Xavier|||0000-0002-7779-6313
Cobalt nanoparticles (NPs) have been prepared by hydrogenation of the organometallic complex [Co(η3-C8H13)(η4-C8H12)] in 1-heptanol in the absence of any other stabilizer and then transformed into Co3O4 NPs using mild oxidative reaction conditions. After deposition onto glassy carbon rotating disk electrodes, the electrocatalytic performance of the Co3O4 NPs in water oxidation has been tested in 1M NaOH. The activity has been benchmarked with that of state-of-the-art Co3O4 NPs through electrochemically-active surface area (ECSA) and specific current density measurements. Furthermore, the covalent grafting of photosensitive polypyridyl-based RuII complexes onto the surface of Co3O4 NPs afforded hybrid nanostructured materials able to photo-oxidize water into O2, while steady-state and time-resolved spectroscopic measurements gave some further insight into kinetics and pertinent reaction steps following excitation. These first-row transition metal oxide hybrid nanocatalysts display better catalytic performance than simple mixtures of non-grafted photosensitizers and Co3O4 NPs, thus evidencing the advantage of the direct coupling between the two entities for the photo-induced water oxidation reaction.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Rational design of a neutral pH functional and stable organic photocathode

  • Francàs, Laia|||0000-0001-9171-6247
  • Burns, Eric
  • Steier, Ludmilla|||0000-0002-7333-7857
  • Cha, Hyojung
  • Solà-Hernández, Lluís
  • Li, Xiaoe
  • Tuladhar, Pabitra Shakya
  • Bofill, Roger|||0000-0002-8888-1871
  • García-Antón, Jordi|||0000-0002-2401-0401
  • Sala, Xavier|||0000-0002-7779-6313
  • Durrant, James R.|||0000-0001-8353-7345
In this work we lay out design guidelines for catalytically more efficient organic photocathodes achieving stable hydrogen production in neutral pH. We propose an organic photocathode architecture employing a NiO hole selective layer, a PCDTBT:PCBM bulk heterojunction, a compact TiO2 electron selective contact and a RuO2 nanoparticle catalyst. The role of each layer is discussed in terms of durability and function. With this strategically designed organic photocathode we obtain stable photocurrent densities for over 5 h and discuss routes for further performance improvement.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Disseny d'un ànode molecular capaç de realitzar un milió de cicles en la catàlisi d'oxidació d'aigua

  • Creus, Jordi|||0000-0001-5555-8122
  • Matheu, Roc
  • Peñafiel, Itziar
  • Moonshiram, Dooshaye|||0000-0002-9075-3035
  • Blondeau, Pascal
  • Benet-Buchholz, Jordi|||0000-0003-3984-3550
  • García-Antón, Jordi|||0000-0002-2401-0401
  • Sala, Xavier|||0000-0002-7779-6313
  • Godard, Cyril
  • Llobet Dalmases, Antoni|||0000-0002-6176-5272
L'obtenció de H2 com a vector energètic a partir de l'aigua i l'energia solar és una alternativa interessant als combustibles fòssils. La seva obtenció a través de la dissociació de l'aigua (water splitting) requereix catalitzadors que disminueixin la barrera energètica de les dues semireaccions involucrades: l'oxidació de l'aigua a O2 i la reducció de protons a H2. El desenvolupament de nous catalitzadors permet millorar el coneixement dels mecanismes de reacció i dissenyar-ne de nous amb propietats catalítiques avançades. En aquest treball presentem la immobilització d'un complex molecular altament actiu en l'oxidació de l'aigua, el qual és capaç de fer un milió de cicles catalítics.