Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 23
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Binding energies of ethanol and ethylamine on interstellar water ices, synergy between theory and experiments

  • Perrero, Jessica|||0000-0003-2161-9120
  • Vitorino, Julie|||0000-0003-2502-487X
  • Congiu, Emanuele|||0000-0003-0313-826X
  • Ugliengo, Piero|||0000-0001-8886-9832
  • Rimola, Albert|||0000-0002-9637-4554
  • Dulieu, François|||0000-0001-6981-0421
Experimental and computational chemistry are two disciplines used to conduct research in astrochemistry, providing essential reference data for both astronomical observations and modeling. These approaches not only mutually support each other, but also serve as complementary tools to overcome their respective limitations. Leveraging on such synergy, we characterized the binding energies (BEs) of ethanol (CHCHOH) and ethylamine (CHCHNH), two interstellar complex organic molecules (iCOMs), on crystalline and amorphous water ices through density functional theory (DFT) calculations and temperature-programmed desorption (TPD) experiments. Experimentally, CHCHOH and CHCHNH behave similarly, in which desorption temperatures are higher on the water ices than on a bare gold surface. Computed cohesive energies of pure ethanol and ethylamine bulk structures allow describing of the BEs of the pure species deposited on the gold surface, as extracted from the TPD curve analyses. The BEs of submonolayer coverages of CHCHOH and CHCHNH on the water ices cannot be directly extracted from TPD due to their co-desorption with water, but they are computed through DFT calculations, and found to be greater than the cohesive energy of water. The behaviour of CHCHOH and CHCHNH is different when depositing adsorbate multilayers on the amorphous ice, in that, according to their computed cohesive energies, ethylamine layers present weaker interactions compared to ethanol and water. Finally, from the computed BEs of ethanol, ethylamine and water, we can infer that the snow-lines of these three species in protoplanetary disks will be situated at different distances from the central star. It appears that a fraction of ethanol and ethylamine is already frozen on the grains in the water snow-lines, causing their incorporation in water-rich planetesimals.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Binding Energies of N-bearing Species on Interstellar Water Ice Mantles by Quantum Chemical Calculations

  • Martínez-Bachs, Berta|||0000-0002-1290-7019
  • Ferrero, Stefano|||0000-0001-7819-7657
  • Ceccarelli, Cecilia|||0000-0001-9664-6292
  • Ugliengo, Piero|||0000-0001-8886-9832
  • Rimola, Albert|||0000-0002-9637-4554
Of the about 300 gas-phase molecular species so far detected in the interstellar medium (ISM), mostly via observations of their rotational lines, around 40% contain nitrogen (N) atoms. Likewise, of the less than a dozen interstellar molecules, firmly or likely detected in the solid-state water-dominated icy matrix by means of infrared observations, two bear N. A crucial parameter that regulates whether a species is in the gas or adsorbed on the icy phase is their binding energy (BE) toward the icy grain. Therefore, an accurate quantification of the BE is of paramount importance to properly model the ISM chemistry through numerical models. However, very few BEs are available in the literature, either determined experimentally or theoretically. In the present study, we calculate the BEs of 21 among the most abundant interstellar N-bearing species. We adopted two structural water ice models, representing a crystalline and an amorphous surface, using a reliable cost-effective procedure based on the density functional theory. While on the crystalline surface model only one BE per species is obtained due to the high symmetry of the unit cell, on the amorphous model from 5 to 10 BEs are obtained, due to its richer surface morphological variety. Most of our computed BEs agree with available experimental and other computational values. Finally, we discuss how the newly computed BEs can help estimate which N-bearing species can be frozen at the water snow line and, therefore, incorporated in water-rich ice planetesimals.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Single-atom catalysis in space

  • Pareras, Gerard|||0000-0002-8435-3297
  • Cabedo Soto, Victoria|||0000-0002-6944-9207
  • McCoustra, Martin|||0000-0002-5716-110X
  • Rimola, Albert|||0000-0002-9637-4554
Context: The presence of grains is key to the synthesis of molecules in the interstellar medium that cannot form in the gas phase due to its low density and temperature conditions. In these reactions, the role of the grains is to enhance the encounter rate of the reactive species on their surfaces and to dissipate the energy excess of largely exothermic reactions, but less is known about their role as chemical catalysts; namely, bodies that provide low activation energy pathways with enhanced reaction rates. Different refractory materials with catalytic properties, such as those containing space-abundant d-block transition metals like iron (Fe), are present in astrophysical environments. Aims: Here, we report for first time mechanistic insights into the Fischer-Tropsch-type (FTT) synthesis of ethanol (CH3CH2OH), through ketene (CH2CO) and acetaldehyde (CH3CHO) intermediates, and methane (CH4) via a chain growing mechanism using a single-Fe atom supported on silica (SiO2) surfaces as a heterogeneous astrocatalyst. Methods: Quantum chemical simulations based on extended periodic surfaces were carried out to characterize the potential energy surfaces of the FTT chain growing mechanism. Calculations of the binding energies of reaction intermediates and products and Rice-Ramsperger-Kassel-Marcus kinetic calculations were performed to evaluate catalytic efficiencies and determine the feasibility of the reactions in different astrophysical environments. Results: Mechanistic studies demonstrate that the FTT chain growing mechanism enters into direct competition with FTT methanol formation, since formation of the CH2 chain growth initiator is feasible. The coupling of the CH2 with CO (forming ketene) and subsequent H2 additions yield acetaldehyde and finally ethanol, while direct H2 addition to CH2 produces methane. Thermodynamically, both processes are largely exergonic, but they present energy barriers that require external energy inputs to be overcome. Kinetic calculations demonstrate the strong temperature dependency of the FTT processes as tunneling does not dominate. Conclusions: The results could explain the presence of CH3CH2OH and CH4 in diverse astrophysical regions where current models fail to reproduce their observational quantities. The evidence that the chain growing mechanism is operating opens a new reactivity paradigm toward the formation of complex organic molecules, which is constrained by the temperature-dependent behaviour of the FTT reactions and by making their energy features a crucial aspect.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Exploring Forsterite Surface Catalysis in HCN Polymerization, Computational Insights for Astrobiology and Prebiotic Chemistry

  • Bancone, Niccolò|||0009-0005-0593-9150
  • Pantaleone, Stefano|||0000-0002-2457-1065
  • Ugliengo, Piero|||0000-0001-8886-9832
  • Rimola, Albert|||0000-0002-9637-4554
  • Corno, Marta|||0000-0001-7248-2705
Understanding the catalytic role of cosmic mineral surfaces is crucial for elucidating the chemical evolution needed for the emergence of life on Earth and other planetary systems. In this study, the catalytic role of silicate forsterite (Mg2SiO4) surfaces in the synthesis of iminoacetonitrile (IAN, HN=CH-CN) from the condensation of two hydrogen cyanide (HCN) molecules is investigated through quantum mechanical simulations. Using density functional theory calculations, the potential energy surfaces alongside the kinetics of various surface-mediated reactions leading to the formation of IAN are characterized. The effectiveness of forsterite as a catalyst is a delicate balance of the surface reactivity: on one side, the deprotonation of HCN is mandatory to trigger the dimerization; on the other side, the species should be weakly bound to the surface, thus allowing for their diffusion to meet with each other. The work reveals interesting counterintuitive results: the (120) and (101) forsterite surfaces (the less reactive ones) exhibit favorable catalytic properties for the reaction, in detriment to the (111) one (one of the most reactive). The implications of these findings in the astrobiology and prebiotic chemistry fields and for laboratory experiments are discussed, highlighting the potential role of cosmic silicates in the synthesis of complex organic molecules.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Comprehensive atomistic simulations of Fischer-Tropsch in outer space, astrocatalysis by Fe13-supported nanoclusters on SiO2

  • Pareras, Gerard|||0000-0002-8435-3297
  • Cabedo Soto, Victoria|||0000-0002-6944-9207
  • McCoustra, Martin|||0000-0002-5716-110X
  • Rimola, Albert|||0000-0002-9637-4554
Catalytic processes are fundamental not only to terrestrial chemistry (e.g., in the synthesis of fuels, chemicals, and pharmaceuticals) but also to extraterrestrial chemistry, contributing to chemical reactions occurring in various astrophysical environments. In space, gas-phase reactions are limited due to sparse energy sources and the absence of a medium for energy dissipation, making heterogeneous catalysis on cosmic dust grains essential for driving chemical transformations. Iron nanoclusters (FeNCs) embedded on these grains present intriguing catalytic properties, especially for Fischer-Tropsch-type (FTT) reactions that synthesize interstellar organic compounds. This study investigates the formation of short-chain alcohols (CHOH and CHCHOH) and hydrocarbons (CH, CHCH and CHCH) through a FTT mechanism using as astrocatalyst a realistic model of an Fe nanocluster supported on a silica (SiO) surface (Fe@SiO) by characterizing the potential energy surfaces (PESs) and performing kinetics calculations. Comprehensive PESs grounded on density functional theory (DFT) reveal that direct CO dissociation on Fe@SiO (required to form CHCHOH and CH) is energetically unfavorable, but subsequent H addition facilitates CO bond cleavage, thus competing with the formation of CHOH. Moreover, kinetic analysis indicates that C-O dissociation is more favorable than CHOH synthesis, enabling chain-growing-based processes. Kinetics also predicts that the temperatures at which the FTT reactions can operate (i.e., above 100 K) are those available in protostellar regions and in evolved stages during a Solar-type planetary system formation (e.g., protoplanetary disks and primitive planetary environments).These findings offer a new proof on the feasibility of Astrocatalysis (namely, true chemical catalysis in astrophysical environments), in this case exerted by FeNCs, which partly alleviate stringent conditions required for FT on Earth, this way proposing a potential FTT-supported catalysis under milder conditions in astrochemical contexts.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Predicting accurate binding energies and vibrational spectroscopic features of interstellar icy species. A quantum mechanical study

  • Bulik, Alicja|||0009-0002-8594-8054
  • Martínez-Bachs, Berta|||0000-0002-1290-7019
  • Bancone, Niccolò|||0009-0005-0593-9150
  • Mates-Torres, Eric|||0000-0001-9002-7669
  • Corno, Marta|||0000-0001-7248-2705
  • Ugliengo, Piero|||0000-0001-8886-9832
  • Rimola, Albert|||0000-0002-9637-4554
In the coldest, densest regions of the interstellar medium (ISM), dust grains are covered by thick ice mantles dominated mainly by water. Although more than 300 species have been detected in the gas phase of the ISM by their rotational emission lines within the radio frequency range, only a few were found in interstellar ices, e.g. CO, CO, NH, CHOH, CH and OCS, by means of infrared (IR) spectroscopy. Observations of ices require a background-illuminating source for absorption, constraining the available sight lines for investigation. Further challenges arise when comparing with laboratory spectra due to the influence of temperature, ice structure and the presence of other species. In the era of IR observations provided by the James Webb space telescope (JWST), it is crucial to provide reference spectral data confirming JWST's assigned features. For this purpose, this study addresses the adsorption of the aforementioned species on water ice surfaces and their IR features by means of quantum chemical computations grounded on the density functional theory (DFT) hybrid B3LYP-D3(BJ) functional, known to give reliable results for binding energy and vibrational frequency calculations, including IR spectra simulation. The calculated binding energies and IR spectral data are presented in the context of experimental spectra of ices and the new findings from the JWST, which have already proven to be insightful thanks to its unmatched sensitivity. We show that quantum chemistry is a powerful tool for accurate frequency calculations of ISM ice interfaces, providing unprecedented insights into their IR signatures.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Mapping adsorption on ionic surfaces via a pairwise potential-based high-throughput approach

  • Mates-Torres, Eric|||0000-0001-9002-7669
  • Ugliengo, Piero|||0000-0001-8886-9832
  • Rimola, Albert|||0000-0002-9637-4554
Understanding molecular adsorption on ionic surfaces is crucial for a variety of chemical applications, from heterogeneous catalysis to prebiotic chemistry. Traditional approaches for identifying adsorption sites often rely on computationally expensive methods such as density functional theory (DFT), which limits their applicability to chemically complex surfaces. In this work, we propose an automated high-throughput approach to obtain a complete picture of the adsorbate-surface interaction by means of pairwise Coulomb and Lennard-Jones potentials. Using a grid-based surface scan to calculate per-site potential energies of adsorption, this method efficiently predicts global adsorption minima and all potential binding modes of a surface-adsorbate system, with the only user input being the surface CIF. Our approach is validated by studying formaldehyde (HCO) adsorption on forsterite (MgSiO), a common silicate, and l-cysteine adsorption on cadmium sulfide (CdS). The predicted adsorption configurations and energies are compared with DFT values in the literature, showing good agreement and confirming the accuracy of our method. Our workflow provides a rapid means of exploring large configurational spaces and identifying stable adsorption structures, making it particularly useful for complex surfaces with multiple interaction sites. The simplicity of the model, combined with its accuracy, suggest it could be employed to discover new catalytic pathways on chemically complex ionic surfaces.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Revealing SO2 and CO2 adsorption features on forsterite via IR spectroscopy and automated computational approaches

  • Mates-Torres, Eric|||0000-0001-9002-7669
  • Escolano Casado, G.|||0000-0002-1996-1253
  • Mino, Lorenzo|||0000-0002-9882-8361
  • Balucani, Nadia|||0000-0001-5121-5683
  • Ugliengo, Piero|||0000-0001-8886-9832
  • Rimola, Albert|||0000-0002-9637-4554
The interaction between interstellar molecules and silicate dust plays a critical role in the chemical evolution of interstellar and circumstellar environments. In this work, we combine in situ infrared (IR) spectroscopy with automated density functional theory (DFT) calculations to investigate the adsorption and vibrational signatures of CO and SO on forsterite surfaces. Experimental IR spectra collected under cryogenic conditions reveal coverage- and temperature-dependent features that evolve from physisorbed to chemisorbed regimes. To interpret these observations, we construct theoretical spectra from a large ensemble of adsorption configurations across multiple surface terminations, weighted by their Boltzmann distributions at 100 K and by a per-surface abundance factor. The resulting spectra reproduce key experimental features, enabling the identification of binding trends. For CO, we predict the transition from weakly bound species to carbonate-like modes at lower frequencies. For SO, our simulations identify the dominant bands due to bidentate and tridentate chemisorption. This integrative approach highlights the importance of surface morphology and thermodynamic weighting in reconciling theory and experiments providing a framework for the spectroscopic analysis of molecular adsorption on interstellar dust analogs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Energy partitioning in H2 formation on interstellar carbonaceous grains. Insights from ab initio molecular dynamics simulations

  • Jubert, Léana|||0009-0008-3217-4802
  • Martínez-Bachs, Berta|||0000-0002-1290-7019
  • Pareras, Gerard|||0000-0002-8435-3297
  • Rimola, Albert|||0000-0002-9637-4554
Molecular hydrogen (H) stands as the most abundant molecule within the interstellar medium (ISM), primarily originating from the coupling of two H atoms on the surfaces of dust grains. The role of dust grains during the H formation is of third bodies, dissipating the nascent reaction energy and thereby stabilizing the newly formed molecule and preventing it from dissociating back. Whether the formed H remains adsorbed or not on the surface (in this latter case undergoing chemical desorption, CD) largely depends on the type of grain and its capability to absorb the reaction energy excess. In diffuse interstellar clouds, dust grains are typically bare and are composed primarily of silicates or carbonaceous materials, while in denser regions they are covered in ices mostly of water. While water-ice-covered grains have been elucidated to be efficient third bodies, the behavior of carbonaceous grains is still unknown. In this study, ab initio molecular dynamics (AIMD) simulations are employed to analyze how the reaction energy is distributed between the newly formed H and a large graphene slab, as a model of carbonaceous grains in diffuse clouds, and assess the feasibility of CD. The results indicate that only a fraction of the reaction energy is absorbed by the surface, leaving the newly formed H with sufficient internal energy for CD to occur.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Atomistic Modeling of Methyl Formate and Glycolaldehyde Formation on Interstellar Dirty Ice Mantles via a "Radical + Ice" Mechanism

  • Perrero, Jessica|||0000-0003-2161-9120
  • Pantaleone, Stefano|||0000-0002-2457-1065
  • Ugliengo, Piero|||0000-0001-8886-9832
  • Rimola, Albert|||0000-0002-9637-4554
Methylformate (MF) and glycolaldehyde (GA) are two primogenital organic molecules detected in both cold and warm regions of the interstellar medium (ISM). Both gas-phase and grain-surface pathways have been proposed to explain their abundances, yet uncertainties remain, since prevailing grain-surface mechanisms favor the formation of GA over MF, which mismatch observations in different ISM regions. In this work, MF and GA synthetic reactions are atomistically modeled on surfaces containing variable H (Formula presented.) O and CO percentages (interstellar dirty ices), in which one of the reactants coming from the gas phase reacts with an icy CO, thus adopting the following two-step "radical + ice" mechanism: for MF, OCH (Formula presented.) + (Formula presented.) (Formula presented.) COOCH (Formula presented.) + H (Formula presented.) HCOOCH (Formula presented.); for GA, CH (Formula presented.) OH + (Formula presented.) (Formula presented.) COCH (Formula presented.) OH + H (Formula presented.) HCOCH (Formula presented.) OH. Calculations show that the first step presents an energy barrier (32-38 kJ mol (Formula presented.) for MF and 17-20 kJ mol (Formula presented.) for GA), while the second step is nearly barrierless. Although the energetics favor GA formation, the observed abundances are better explained by desorption phenomena rather than reaction barriers are argued. Specifically, the weaker binding energies of MF (16.8-46.1 kJ mol (Formula presented.)) than GA (28.4-90.2 kJ mol (Formula presented.)) support its higher abundance in the ISM.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Unraveling the Interface Chemistry between HCN and Cosmic Silicates by the Interplay of Infrared Spectroscopy and Quantum Chemical Modeling

  • Bancone, Niccolò|||0009-0005-0593-9150
  • Santalucia, Rosangela
  • Pantaleone, Stefano|||0000-0002-2457-1065
  • Ugliengo, Piero|||0000-0001-8886-9832
  • Mino, Lorenzo|||0000-0002-9882-8361
  • Rimola, Albert|||0000-0002-9637-4554
  • Corno, Marta|||0000-0001-7248-2705
Understanding the interaction between hydrogen cyanide (HCN) and silicate surfaces is crucial for elucidating the prebiotic processes occurring on interstellar grain cores as well as in cometary and meteoritic matrices. In this study, we characterized the adsorption features of HCN on crystalline forsterite (MgSiO) surfaces, one of the most abundant cosmic silicates, by combining experimental infrared spectra at low temperatures (100-150 K) with periodic DFT simulations. Results showed the coexistence of both molecular and dissociative HCN adsorption complexes as a function of the considered forsterite crystalline face. Molecular adsorptions dominate on the most stable surfaces, while dissociative adsorptions occur predominantly on surfaces of lower stability, catalyzed by the enhanced Lewis acid-base behavior of surface-exposed Mg-O ion pairs. On the whole set of adsorption cases, harmonic frequency calculations were carried out and compared with the experimental infrared bands. To disentangle each vibrational mode contributing to the experimental broad bands, we run the best nonlinear fit between the predicted set of frequencies and the experimental bands. The outcome of this procedure allowed us to (i) deconvolute the experimental IR spectrum by assigning computed normal modes of vibrations to the main features of each band and (ii) reveal which crystal faces are responsible for the largest contribution to the adsorbate vibrational bands, giving information about the morphology of the samples. The present straightforward procedure is quite general and of broad interest in the fine characterization of the infrared spectra of adsorbates on complex inorganic material surfaces.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Cosmic Silicate Surfaces Catalizing Prebiotic Reactions: Atomistic Modeling on the Polymerization of HCN

  • Bancone, Niccolò|||0009-0005-0593-9150
  • Pantaleone, Stefano|||0000-0002-2457-1065
  • Pareras, Gerard|||0000-0002-8435-3297
  • Ugliengo, Piero|||0000-0001-8886-9832
  • Rimola, Albert|||0000-0002-9637-4554
  • Corno, Marta|||0000-0001-7248-2705
Hydrogen cyanide, HCN, is a fundamental building block in astro- and cosmochemical environments, known for its ability to form prebiotically relevant molecules such as nucleobases. Although its polymerization is inhibited under the cold, dilute conditions of the interstellar medium, the higher temperatures of more evolved rocky bodies, combined with the presence of mineral surfaces, can catalyze the reaction. In this study, we use atomistic simulations grounded on the density functional theory (DFT) to elucidate the complete tetramerization pathway of HCN to diaminomaleonitrile (DAMN) and diaminofumaronitrile (DAFN), catalyzed by the crystalline Mg2SiO4 forsterite (120) surface. Results demonstrate that the intrinsic acid-base properties of the surface facilitate chemical bond formation/cleavage needed for HCN oligomerization, lowering activation barriers by ∼120-220 kJ mol-1 with respect to the gas-phase. Kinetic analyses reveal that the reactions are feasible at temperatures above 300 K, particularly under conditions present in warm, rocky bodies such as asteroids, meteorites, and planetary surfaces. The presence of water further accelerates key steps by assisting proton transfer processes. These findings support a model in which Mg-rich silicate minerals (abundant in the early Solar System) may have directly catalyzed the formation of complex organic molecules, which, in turn, are precursors of more complex biomolecules, thereby contributing to the essential chemical inventory for the emergence of life on early Earth and other primitive planets with propitious conditions.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Quantum mechanical investigation on the formation of silicate building blocks on interstellar ice mantles

  • Gelli, Andreha|||0009-0001-5741-7638
  • Perrero, Jessica|||0000-0003-2161-9120
  • Ferero, S.
  • Enrique-Romero, Joan|||0000-0002-2147-7735
  • Ceccarelli, Cecilia|||0000-0001-9664-6292
  • Ugliengo, Piero|||0000-0001-8886-9832
  • Balucani, Nadia|||0000-0001-5121-5683
  • Rimola, Albert|||0000-0002-9637-4554
Silicon monoxide (SiO), a diatomic molecule present in the interstellar medium, probably contributes to the formation of silicate dust grains since orthosilicic acid (Si(OH)4 ), a SiO derivative, is a precursor of silica and silicates. The formation of Si(OH)4 is investigated here by means of quantum chemical computations, characterizing the interaction and reactivity of SiO with water ice mantles (modelled through different cluster systems) that coat interstellar dust grains in dense clouds. Several reaction pathways involving SiO and H2 O were simulated with the aim of forming Si(OH)2 and subsequently Si(OH)4 . Results highlight that the ice mantle not only supplies a reactant, H2 O, but also acts as a chemical catalyst, reducing the energy barrier of the process. The formation of the Si(OH)2 precursor is a crucial step, occurring easily by reaction of SiO with H2 O. Subsequently, both the Si(OH)2 + O --→ OSi(OH)2 + H2 O ---→ Si(OH)4 and Si(OH)2 + 2 O --→ O2 Si(OH)2 + 2 H --→ Si(OH)4 paths have been found to be energetically favourable towards Si(OH)4 formation due to being barrierless, although formation of H2 Si(OH)2 by H addition to Si(OH)2 is a potential competitive channel. This study provides evidence that orthosilicic acid can form due to the addition of H2 O, O, and H to SiO on water ice mantles, indicating that silicate grains can potentially form and grow in cold interstellar regions, in addition to originating from material ejected by asymptotic giant branch stars and supernovae remnants. Our results show that grain surface reactions in dense clouds are important not only in the synthesis of volatile molecular species but also in the formation of silicate refractory material precursors.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Gaseous methanol in cold environments, is thermal desorption from low binding energy sites the explanation?

  • Bariosco, Vittorio|||0009-0000-7269-8418
  • Tinacci, Lorenzo|||0000-0001-9909-9570
  • Pantaleone, Stefano|||0000-0002-2457-1065
  • Ceccarelli, Cecilia|||0000-0001-9664-6292
  • Rimola, Albert|||0000-0002-9637-4554
  • Ugliengo, Piero|||0000-0001-8886-9832
Methanol (CH 3 OH) is the simplest and most abundant interstellar complex organic molecule (iCOM) observed in warm and cold environments. It is thought to be formed on the surfaces of dust grains and released into the gas-phase by thermal desorption of the ices in the warm regions where the dust temperature is high ( ≥100 K). Ho we ver, the presence of gaseous methanol in cold environments represented a challenge since its detection, e.g. in cold molecular clouds, prestellar cores, and protoplanetary discs. The reason is that thermal desorption was thought to be completely inefficient in these conditions. In this work, we show that this is not the case. Specifically, we present new calculations of the binding energy (BE) distribution on an iced grain composed of 200 water molecules. On this grain we obtained 223 unique sites with different BE. We found that the methanol BE distribution is well reproduced by a Gaussian function with a mean of 35.5 kJ mol -1 (4255 K) and a standard deviation of 13.0 kJ mol -1 (1558 K). To facilitate the incorporation of our calculations into astrochemical models, we provide a table with the fraction of sites as a function of the BE and the corresponding prefactors. Comparison with published experimental BE values suggests that they are dominated by the larger BE sites. Finally, and most importantly, our calculations show that 2 per cent of the BEs are around 10 kJ mol -1 (1240 K), implying that thermal desorption from these sites may explain the presence of gaseous methanol in cold environments.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Hot Sulfur on the Rocks: The Reaction of Electronically Excited Sulfur Atoms with Water in an Ice-Surface Model

  • Di Genova, Gabriella
  • Perrero, Jessica|||0000-0003-2161-9120
  • Rosi, Marzio|||0000-0002-1264-3877
  • Ceccarelli, Cecilia|||0000-0001-9664-6292
  • Rimola, Albert|||0000-0002-9637-4554
  • Balucani, Nadia|||0000-0001-5121-5683
In this contribution, we present a theoretical investigation of the reaction involving atomic sulfur in its first electronically excited state, 1D, and H2O on an ice-surface model. This study is motivated by the work of Giustini et al. (ACS Earth Space Chem., 2024, 8, 2318), which indicated a strong effect of the presence of four additional water molecules in the S(1D) + H2O reaction compared to the pure gas-phase case. Our simulation treats the long-range interactions (H-bonds and dispersion forces) with the ice water molecules in a much more realistic way being based on the use of a cluster of 18 water molecules, thus overcoming the limits of the small cluster used by Giustini et al. According to our results, S(1D) reacts via two possible reaction mechanisms: (1) addition to the O atom of a water molecule with the formation of H2OS or (2) insertion into one of the O-H bonds of a water molecule with the formation of HOSH. Both H2OS and HOSH are stabilized on ice by energy dissipation rather than isomerizing or dissociating into two products as seen in the gas-phase reaction. The interaction with surrounding water molecules affects the entire reaction pathway by stabilizing intermediate species, reducing some barriers, and impeding the only two-product open channel of the gas-phase reaction. S(1D) can be produced by UV-induced photodissociation of various precursor molecules on the surface of interstellar or cometary ice or by other high-energy processes induced by electrons or cosmic rays also in the ice bulk. Therefore, our results can be of help in elucidating the mysterious sulfur chemistry occurring in the icy mantles of interstellar grains or in cometary nuclei. Furthermore, this study demonstrates that the product branching ratios of gas-phase reactions should not be uncritically used in modeling interstellar ice chemistry.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Formation of the glycine isomer glycolamide (NH2C(O)CH2OH) on the surfaces of interstellar ice grains: Insights from atomistic simulations

  • Perrero, Jessica|||0000-0003-2161-9120
  • Alessandrini, Silvia|||0000-0003-3152-3261
  • Ye, H.
  • Puzzarini, Cristina|||0000-0002-2395-8532
  • Rimola, Albert|||0000-0002-9637-4554
Context. Syn-glycolamide, a glycine isomer, has recently been detected in the G+0.693-0.027 molecular cloud. Investigations into its formation in the interstellar medium could offer insights into synthetic routes leading to glycine in prebiotic environments. Aims. Quantum chemical simulations on glycolamide (NH2C(O)CH2OH) formation on interstellar ice mantles, mimicked by a water ice cluster model, are presented. Methods. In this paper, we modeled glycolamide synthesis considering a stepwise process: the coupling between formaldehyde (H2CO) and the radical of formamide (NH2CO•) occurs first, forming the glycolamide precursor NH2C(=O)CH2O•, which is then hydrogenated to give anti-glycolamide. We hypothesize that anti-to-syn interconversion occurs in conjunction with glycolamide desorption from the ice surface. Results. The reaction barrier for NH2C(O)CH2O• formation varies from 9 to 26 kJ mol-1, depending on surface binding sites. Kinetic studies indicate that this reaction step is feasible in environments with a T > 35 K, until desorption of the reactants. The hydrogenation step leading to anti-glycolamide presents almost no energy barrier due to the easy H atom diffusion toward the NH2C(O)CH2O• intermediate. However, it competes with the extraction of an H atom from the formyl group of NH2C(O)CH2O•, which leads to formyl formamide, NH2C(O)CHO, and H2. Nonetheless, according to our results, anti-glycolamide formation is predicted to be the most favored reactive channel.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Binding Energies of Interstellar Complex Organic Molecules on Water Ice Surfaces: A Quantum Chemical Investigation

  • Kakkar, Harjasnoor|||0000-0002-8984-2356
  • Martínez-Bachs, Berta|||0000-0002-1290-7019
  • Ceccarelli, Cecilia|||0000-0001-9664-6292
  • Ugliengo, Piero|||0000-0001-8886-9832
  • Rimola, Albert|||0000-0002-9637-4554
Interstellar dust grains are enveloped by ices of frozen molecules in cold, dense regions of the interstellar medium (ISM), which are also observed in the gas phase. Whether a species is in the solid or gaseous state is governed by its binding energy (BE) on the grains. Hence, BEs are crucial in the solid-to-gas transition and are key input parameters for astrochemical models that simulate the physicochemical processes leading to the evolution of chemistry in the ISM. About 40% of the currently detected interstellar molecules belong to the category of interstellar complex organic molecules (iCOMs). This work aims to accurately evaluate the BEs of 19 iCOMs by means of quantum chemical calculations. Atomistic surface models simulating the structures of both crystalline and amorphous water ice were employed adopting a periodic approach, thereby accounting for the hydrogen bond (H-bond) cooperativity imparted by the extensive network present in the surfaces. A cost-effective but reliable procedure based on density functional theory was used to predict the structures of the adsorption complexes and calculate their BEs, which are mainly driven by H-bond and dispersion interactions, the latter presenting a fair contribution. A final discussion on the astrophysical implications of the computed BEs and the importance of obtaining reliable BEs on realistic interstellar ice surfaces in relation to the snow lines of iCOMs in hot cores/corinos and protoplanetary disks is provided.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Is cosmic dust porous?

  • Potapov, Alexey|||0000-0002-3699-7477
  • McCoustra, Martin R. S.|||0000-0002-5716-110X
  • Tazaki, Ryo|||0000-0003-1451-6836
  • Bergin, Edwin A.|||0000-0003-4179-6394
  • Bromley, Stefan|||0000-0002-7037-0475
  • Garrod, Robin T.|||0000-0001-7723-8955
  • Rimola, Albert|||0000-0002-9637-4554
There is a long-standing discussion in the astrophysical/astrochemical community as to the structure and morphology of dust grains in various astrophysical environments (e.g., interstellar clouds, protostellar envelopes, protoplanetary and debris disks, and the atmospheres of exoplanets). Typical grain models assume a compact dust core which becomes covered in a thick ice mantle in cold dense environments. In contrast, less compact cores are likely to exhibit porosity, leading to a pronounced increase in surface area with concomitant much thinner ice films and higher accessibility to the bare grain surface. Several laboratory experimental and theoretical studies have shown that this type of dust structure can have a marked effect on several physico-chemical processes, including adsorption, desorption, mobility, and reactivity of chemical species. Porous grains are thus thought to likely play a particularly important and wide-ranging astrochemical role. Herein, we clarify what is meant by porosity in relation to grains and grain agglomerates, assess the likely astrochemical effects of porosity and ask whether a fractal/porous structural/morphological description of dust grains is appropriate from an astronomical perspective. We provide evidence for high porosity from laboratory experiments and computational simulations of grains and their growth in various astrophysical environments, and assess the observational constraints and perspectives on cosmic dust porosity. Overall, our paper discusses the effects of including porosity in dust models and the need to use such models for future astrophysical, astrochemical and astrobiological studies involving surface or solid-state processes.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Single-atom iron on silicon carbide surfaces as catalyst of Fischer-Tropsch-type reactions in astrophysical environments

  • Pareras, Gerard|||0000-0002-8435-3297
  • Rimola, Albert|||0000-0002-9637-4554
Silicon carbide (SiC) is a major component of interstellar dust in carbon-rich environments, but its catalytic potential in space has remained largely unexplored. In this work, we investigate how single iron atoms supported on SiC (Fe0@SiC) can drive Fischer Tropsch-type (FTT) reactions, transforming the two most abundant gas-phase species in the interstellar medium (H2 and CO) into more complex organic compounds, i.e., formaldehyde (H2CO) and methanol (CH3OH). Using density functional theory (DFT), we model the catalytic cycle on the most stable β-SiC (110) surface, revealing that H2CO forms efficiently with relatively low activation barriers (up to 18.3 kcal mol-1), while, in contrast, CH3OH formation faces a significant energy barrier (32.6 kcal mol-1) in space. Atomistic mechanistic study highlights the role of Fe0@SiC in stabilizing reaction intermediates through Fe-H-Si bridging interactions, which facilitate H2 activation and CO hydrogenation. Kinetic analysis suggests that H2CO and CH3OH formation is viable in regions with temperatures above 200 and 350 K, respectively, aligning with observations of formaldehyde and methanol in protoplanetary disks and comets. The findings also suggest that FTT processes could contribute to the formation of other organic molecules, such as acetaldehyde and short-chain hydrocarbons, in space. This work offers new insights into how cosmic dust grains might drive the formation of complex molecules during the planetary system formation.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A Fully ab Initio Kinetic Monte Carlo Approach for Modeling Adsorption and Diffusion in Interstellar Icy Grain Mantles: The Case of H2S

  • Bariosco, Vittorio|||0009-0000-7269-8418
  • Pantaleone, Stefano|||0000-0002-2457-1065
  • Ceccarelli, Cecilia|||0000-0001-9664-6292
  • Rimola, Albert|||0000-0002-9637-4554
Understanding diffusion on interstellar ices is key to modeling the chemical evolution of cold molecular clouds, where low temperatures severely limit molecular mobility. In this study, we introduce a robust and fully automated multiscale computational framework to quantify diffusion processes of adsorbates at the surface of amorphous solid water (ASW). Using H2S as a test case, whose binding sites were previously studied at the ab initio level, we constructed a detailed network of 141 adsorption sites connected by over 270 transition states. All density functional energetics were benchmarked against DLPNO-CCSD(T), achieving chemical accuracy in the description of diffusion barriers, which span from 0.1 to 27 kJ mol-1 with a median value of 5.4 kJ mol-1. An off-lattice kinetic Monte Carlo (kMC) model adopting both the ab initio diffusion barriers and binding energies for the desorption processes was carried out to compute temperature-dependent diffusion coefficients and to reconstruct the temperature-programmed desorption (TPD) curve. Our simulations reveal that thermal diffusion of H2S is negligible below 20 K, with diffusion coefficients as low as 10-48 cm2 s-1 at 10 K, thus excluding Langmuir-Hinshelwood surface encounters under typical dense cloud conditions. Moreover, under submonolayer conditions, diffusion was found to have negligible influence on the reconstructed TPD peak position. Furthermore, our results demonstrate that a universal scaling factor f to guess the diffusion barriers (ΔEdiff) from the sole knowledge of BE: f = ΔEdiff/BE does not apply as it exhibits wide variability across the sampled configurations. These findings highlight the need for incorporating statistically meaningful distributions of binding energies and diffusion barriers in astrochemical models to more accurately capture diffusion and surface reactivity on interstellar ices.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Low-energy glycine formation and spectral masking in star-forming regions

  • Mates-Torres, Eric|||0000-0001-9002-7669
  • Rimola, Albert|||0000-0002-9637-4554
The presence of amino acids in comets and meteorites has long suggested that prebiotic molecules may have formed in space and contributed to the origins of life on Earth. Glycine, the simplest amino acid, has been identified in several extraterrestrial environments, although its detection in the interstellar medium, including prestellar cores and protostellar regions, remains elusive. Here, we investigate a novel catalytic pathway for glycine formation on silicate grains during relatively warm (> 150 K) stages of star formation. Using atomistic simulations, the feasibility of a Strecker-type synthesis and a direct neutral mechanism involving reactivity between formaldehyde, carbon monoxide and ammonia on forsterite surfaces, the major constituent of interstellar dust, is assessed. Results show that the Strecker pathway is limited by high activation barriers, whereas the proposed direct mechanism proceeds through low-energy surface-stabilized intermediates leading to spontaneous formation of glycine in a single-barrier exoergic process. Additionally, glycine strongly adsorbs onto the mineral surface and is unlikely to desorb under warm conditions. A vibrational analysis reveals that glycine formed through this pathway exhibits spectrally distinct features, including suppression and shifting of characteristic bands, which may account for its persistent non-detection in astronomical observations.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Confined Chemistry in Space, Zeolite-Supported Fe13 Nanoclusters Modulate CS Reactivity

  • Pareras, Gerard|||0000-0002-8435-3297
  • Rimola, Albert|||0000-0002-9637-4554
Zeolites are plausible nanoreactors in astrochemical environments, where their internal porosity and ability to host transition metals modulate surface reactivity under near-vacuum conditions. We investigate the confined chemistry of carbon monosulfide (CS) and hydrogen (H) on an Fe nanocluster embedded in chabazite (Fe@CHA) using density functional theory and microkinetic modeling. Motivated by the long-standing "missing sulfur" problem and the relevance of thioformaldehyde (HCS), we use CS + H as a test reaction. On Fe@CHA, H dissociates and CS adsorption strongly polarizes the C-S bond; confinement tilts the competition between pathways so that C-S bond scission dominates over H addition toward HCS. The resulting C and S adatoms are trapped and funnel reactivity toward HS and CH via sequential hydrogenation. Calculations on an open Fe@SiO surface show that, in the absence of confinement, CS hydrogenation to HCS is preferred, confirming that the shift in chemoselectivity is a genuine confinement effect. Insertion of a second CS molecule (without H) enables the formation of CS, CS, and C species, with barriers that favor C-C over S-S coupling. Kinetic analysis indicates that these processes become efficient at mid-to-high temperatures, identifying inner protoplanetary regions as promising environments where zeolitic grains sequester sulfur and reshape CS-based chemistry.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Formation of Methanol via Fischer-Tropsch Catalysis by Cosmic Iron Sulphide

  • Martínez-Bachs, Berta|||0000-0002-1290-7019
  • Anguera González, Alexia
  • Pareras, Gerard|||0000-0002-8435-3297
  • Rimola, Albert|||0000-0002-9637-4554
Chemical reactions in the gas phase of the interstellar medium face significant challenges due to its extreme conditions (i. e., low gas densities and temperatures), necessitating the presence of dust grains to facilitate the synthesis of molecules inaccessible in the gas phase. While interstellar grains are known to enhance encounter rates and dissipate energy from exothermic reactions, their potential as chemical catalysts remain less explored. Here, we present mechanistic insights into the Fischer-Tropsch-type methanol (FTT-CHOH) synthesis by reactivity of CO with H and using cosmic FeS surfaces as heterogeneous catalysts. Periodic quantum chemical calculations were employed to characterize the potential energy surface of the reactions on the (011) and (001) FeS surfaces, considering different Fe coordination environments and S vacancies. Kinetic calculations were also conducted to assess catalytic capacity and allocate reaction processes within the astrochemical framework. Our findings demonstrate the feasibility of FeS-based astrocatalysis in the FTT-CHOH synthesis. The reactions and their energetics were elucidated from a mechanistic standpoint. Kinetic analysis demonstrates the temperature dependency of the simulated processes, underscoring the compulsory need of energy sources considering the astrophysical scenario. Our results provide insights into the presence of CHOH in diverse regions where current models struggle to explain its observational quantity.