Pasar al contenido principal

VISUALIZACION DEL CAMPO ELECTRICO EN DISPOSITIVOS BASADOS EN MATERIALES BI-DIMENSIONALES

RTI2018-099054-J-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD COMPLUTENSE DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Docta Complutense
Publicación Artículo científico (JournalArticle)

Bimodal ionic photomemristor based on a high-temperature oxide superconductor/semiconductor junction

  • El Hage, Ralph
  • Humbert, Vincent
  • Rouco Gómez, Víctor
  • Sánchez Santolino, Gabriel
  • Lagarrigue, Aurelien
  • Seurre, Kevin
  • Carreira, Santiago
  • Sander, Anke
  • Charliac, Jerome
  • Mesoraca, Salvatore
  • Trastoy, Juan
  • Briatico, Javier
  • Santamaría Sánchez-Barriga, Jacobo
  • Villegas, Javier E. E.
Designing efficient photonic neuromorphic systems remains a challenge. Here, the authors develop a new class of memristor sensitive to the dual electro-optical history obtained by exploiting electrochemical, photovoltaic and photo-assisted oxygen ion motion effects at a high temperature superconductor / semiconductor interface. Memristors, a cornerstone for neuromorphic electronics, respond to the history of electrical stimuli by varying their electrical resistance across a continuum of states. Much effort has been recently devoted to developing an analogous response to optical excitation. Here we realize a novel tunnelling photo-memristor whose behaviour is bimodal: its resistance is determined by the dual electrical-optical history. This is obtained in a device of ultimate simplicity: an interface between a high-temperature superconductor and a transparent semiconductor. The exploited mechanism is a reversible nanoscale redox reaction between both materials, whose oxygen content determines the electron tunnelling rate across their interface. The redox reaction is optically driven via an interplay between electrochemistry, photovoltaic effects and photo-assisted ion migration. Besides their fundamental interest, the unveiled electro-optic memory effects have considerable technological potential. Especially in combination with high-temperature superconductivity which, in addition to facilitating low-dissipation connectivity, brings photo-memristive effects to the realm of superconducting electronics.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Reversible metal-insulator transition in SrIrO_3 ultrathin layers by field effect control of inversion symmetry breaking

  • Gallego, Fernando
  • Tornos Castillo, Javier
  • Beltrán Fínez, Juan Ignacio
  • Peralta, Andrea
  • García Barriocanal, Javier
  • Yu, Guichuan
  • Rojas, Geoffrey
  • Munuera, Carmen
  • Cabero Piris, Mariona
  • Sánchez Manzano, David
  • Rivera Calzada, Alberto Carlos
  • Cuéllar Jiménez, Fabian Andrés
  • Sánchez Santolino, Gabriel
  • Sefrioui Khamali, Zouhair
  • Rivera Calzada, Alberto Carlos
  • Mompean, Federico José
  • García Hernández, Mar
  • León Yebra, Carlos
  • Muñoz, María del Carmen
  • Santamaría Sánchez-Barriga, Jacobo
Strong spin-orbit coupling in SrIrO_3 mixes the orbital character of iridium d-bands, resulting in correlated narrow bands and a metal-insulator transition. Here, the electric field generated by ionic liquid gating is used to manipulate the band structure, triggering a reversible control of the metal-insulator transition. SrIrO_3 is a correlated semimetal with narrow t_2g d-bands of strong mixed orbital character resulting from the interplay of the spin-orbit interaction due to heavy iridium atoms and the band folding induced by the lattice structure. In ultrathin layers, inversion symmetry breaking, occurring naturally due to the presence of the substrate, opens new orbital hopping channels, which in presence of spin-orbit interaction causes deep modifications in the electronic structure. Here, we show that in SrIrO_3 ultrathin films the effect of inversion symmetry breaking on the band structure can be externally manipulated in a field effect experiment. We further prove that the electric field toggles the system reversibly between a metallic and an insulating state with canted antiferromagnetism and an emergent anomalous Hall effect. This is achieved through the spin-orbit driven coupling of the electric field generated in an ionic liquid gate to the electronic structure, where the electric field controls the band structure rather than the usual band filling, thereby enabling electrical control of the effective role of electron correlations. The externally tunable antiferromagnetic insulator, rooted in the strong spin-orbit interaction of iridium, may inspire interesting applications in spintronics.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hexagonal Hybrid Bismuthene by Molecular Interface Engineering

  • Dolle, Christian
  • Oestreicher, Víctor
  • Ruiz, Alberto M.
  • Kohring, Malte
  • Wu, Mingjian
  • Sánchez-Santolino, Gabriel
  • Seijas-Da Silva, Alvaro
  • Alcaraz, Marta
  • Eggeler, Yolita M.
  • Spiecker, Erdmann
  • Canet-Ferrer, Josep
  • Weber, Heiko B.
  • Varela, María
  • Garnes-Portoles, Francisco
  • Leyva Perez, Antonio|||0000-0003-1063-5811
[EN] High-quality devices based on layered heterostructuresare typicallybuilt from materials obtained by complex solid-state physical approachesor laborious mechanical exfoliation and transfer. Meanwhile, wet-chemicallysynthesized materials commonly suffer from surface residuals and intrinsicdefects. Here, we synthesize using an unprecedented colloidal photocatalyzed,one-pot redox reaction a few-layers bismuth hybrid of "electronicgrade" structural quality. Intriguingly, the material presentsa sulfur-alkyl-functionalized reconstructed surface that preventsit from oxidation and leads to a tuned electronic structure that resultsfrom the altered arrangement of the surface. The metallic behaviorof the hybrid is supported by ab initio predictionsand room temperature transport measurements of individual nanoflakes.Our findings indicate how surface reconstructions in two-dimensional(2D) systems can promote unexpected properties that can pave the wayto new functionalities and devices. Moreover, this scalable syntheticprocess opens new avenues for applications in plasmonics or electronic(and spintronic) device fabrication. Beyond electronics, this 2D hybridmaterial may be of interest in organic catalysis, biomedicine, orenergy storage and conversion., This work has been supported by the European Union (ERC-2018-StG 804110-2D-PnictoChem & and ERC Proof of Concept Grant 101101079-2D4H2 to G.A.; ERC-2021-StG 101042680 2D-SMARTiES awarded to J.J.B.), the Spanish MICINN (PID2019-111742GA-I00, PID2020-115100GB-I00, MRR/PDC2022-133997-I00, TED2021-131347B-I00, and Excellence Unit Maria de Maeztu CEX2019-000919-M), and the Generalitat Valenciana (CIDEGENT/2018/001, CIDEGENT/2018/005, and CDEIGENT/2019/022). Financial support by Severo Ochoa centre of excellence program (CEX2021-001230-S) is gratefully acknowledged. M.K. and H.B.W. acknowledge support by the Deutsche Forschungsgemeinschaft (DFG), under Projektnummer 182849149 (SFB 953, projects B08 and B13). Electron microscopy work carried out at UCM (M.V., G.S.S.) sponsored by MICINN PID2021-122980OB-C51 and Comunidad de Madrid MAD2D-CM-UCM3. G.S.S. acknowledges financial support from Spanish MCI Grant Nos. RTI2018-099054-J-I00 (MCI/AEI/FEDER, UE) and IJC2018-038164-I. C.D. and Y.M.E. thank the cluster of excellence 3DMM2O funded by DFG under Germany's Excellence Strategy - 2082/1 - 390761711 for financial support. The authors thank Lukas Grunwald and Erich Muller for helpful discussions. A.M.R. thanks the Spanish MIU (Grant No FPU21/04195). A.S.-D. thanks the Universidad de Valencia, for an Atraccion del talento' predoctoral grant. F.G.-P. thanks ITQ, UPV-CSIC for concession of a contract (PAID 01-18).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Combining Freestanding Ferroelectric Perovskite Oxides with Two-Dimensional Semiconductors for High Performance Transistors

  • Puebla, Sergio
  • Pucher, Thomas
  • Rouco, Víctor
  • Sanchez-Santolino, Gabriel
  • Xie, Yong
  • Zamora, Víctor
  • Cuellar, Fabián A.
  • Mompean, Federico J.
  • León, Carlos
  • Island, Joshua O.
  • García-Hernández, Mar
  • Santamaría, Jacobo
  • Munuera, C.
  • Castellanos-Gómez, Andrés
[EN] We demonstrate the fabrication of field-effect transistors based on single-layer MoS2 and a thin layer of BaTiO3 (BTO) dielectric, isolated from its parent epitaxial template substrate. Thin BTO provides an ultrahigh-κ gate dielectric effectively screening Coulomb scattering centers. These devices show mobilities substantially larger than those obtained with standard SiO2 dielectrics and comparable with values obtained with hexagonal boron nitride, a dielectric employed for fabrication of high-performance two-dimensional (2D) based devices. Moreover, the ferroelectric character of BTO induces a robust hysteresis of the current vs gate voltage characteristics, attributed to it polarization switching. This hysteresis is strongly suppressed when the device is warmed up above the tetragonal-to-cubic transition temperature of BTO that leads to a ferroelectric-to-paraelectric transition. This hysteretic behavior is attractive for applications in memory storage devices. Our results open the door to the integration of a large family of complex oxides exhibiting strongly correlated physics in 2D-based devices., European Research Council (ERC) through the project 2DTOPSENSE (GA 755655) European Union’sHorizon 2020 research and innovation program (Graphene Core2-Graphenebased disruptive technologies and Grant Agreement 881603 Graphene Core3-Graphene-based disruptive technologies) EU FLAG-ERA through the project To2Dox (JTC-2019-009) Comunidad de Madrid through the project CAIRO-CM project (Y2020/NMT-6661) Spanish Ministry of Science and Innovation through the projects PID2020-118078RBI00 RTI2018-099054-J-I00 and IJC2018-038164-I, PRE2018-084818 Key Research and Development Program of Shaanxi (Program No.2021KW-02)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hexagonal Hybrid Bismuthene by Molecular Interface Engineering

  • Dolle, Christian
  • Oestreicher, Víctor
  • Ruiz, Alberto M.
  • Kohring, Malte
  • Garnes-Portolés, F.
  • Wu, Mingjian
  • Sanchez-Santolino, Gabriel
  • Seijas-Da Silva, Alvaro
  • Alcaraz, Marta
  • Eggeler, Yolita M.
  • Spiecker, Erdmann
  • Canet-Ferrer, J.
  • Leyva, Antonio
  • Weber, Heiko B.
  • Varela, M.
  • Baldoví, José J.
  • Abellán, Gonzalo
High-quality devices based on layered heterostructures are typically built from materials obtained by complex solid-state physical approaches or laborious mechanical exfoliation and transfer. Meanwhile, wet-chemically synthesized materials commonly suffer from surface residuals and intrinsic defects. Here, we synthesize using an unprecedented colloidal photocatalyzed, one-pot redox reaction a few-layers bismuth hybrid of “electronic grade” structural quality. Intriguingly, the material presents a sulfur-alkyl-functionalized reconstructed surface that prevents it from oxidation and leads to a tuned electronic structure that results from the altered arrangement of the surface. The metallic behavior of the hybrid is supported by ab initio predictions and room temperature transport measurements of individual nanoflakes. Our findings indicate how surface reconstructions in two-dimensional (2D) systems can promote unexpected properties that can pave the way to new functionalities and devices. Moreover, this scalable synthetic process opens new avenues for applications in plasmonics or electronic (and spintronic) device fabrication. Beyond electronics, this 2D hybrid material may be of interest in organic catalysis, biomedicine, or energy storage and conversion., This work has been supported by the European Union (ERC-2018-StG 804110-2D-PnictoChem & and ERC Proof of Concept Grant 101101079-2D4H2 to G.A.; ERC-2021-StG 101042680 2D-SMARTiES awarded to J.J.B.), the Spanish MICINN (PID2019-111742GA-I00, PID2020–115100GB–I00, MRR/PDC2022-133997-I00, TED2021-131347B-I00, and Excellence Unit María de Maeztu CEX2019-000919-M), and the Generalitat Valenciana (CIDEGENT/2018/001, CIDEGENT/2018/005, and CDEIGENT/2019/022). Financial support by Severo Ochoa centre of excellence program (CEX2021–001230–S) is gratefully acknowledged. M.K. and H.B.W. acknowledge support by the Deutsche Forschungsgemeinschaft (DFG), under Projektnummer 182849149 (SFB 953, projects B08 and B13). Electron microscopy work carried out at UCM (M.V., G.S.S.) sponsored by MICINN PID2021-122980OB-C51 and Comunidad de Madrid MAD2D-CM-UCM3. G.S.S. acknowledges financial support from Spanish MCI Grant Nos. RTI2018-099054-J-I00 (MCI/AEI/FEDER, UE) and IJC2018-038164-I. C.D. and Y.M.E. thank the cluster of excellence 3DMM2O funded by DFG under Germany’s Excellence Strategy – 2082/1 – 390761711 for financial support. The authors thank Lukas Grünwald and Erich Müller for helpful discussions. A.M.R. thanks the Spanish MIU (Grant No FPU21/04195). A.S.-D. thanks the Universidad de Valencia, for an ‘Atracción del talento’ predoctoral grant. F.G.-P. thanks ITQ, UPV–CSIC for concession of a contract (PAID 01-18)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000919-M)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021–001230–S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strong Electrostatic Control of Excitonic Features in MoS2 by a Free-Standing Ultrahigh-κ Ferroelectric Perovskite

  • Pucher, Thomas
  • Puebla, Sergio
  • Zamora, V.
  • Sánchez Viso, Estrella
  • Rouco, V.
  • Leon, C.
  • García-Hernández, Mar
  • Santamaria, J.
  • Munuera, C.
  • Castellanos-Gómez, Andrés
Integrating free-standing complex oxides with two-dimensional (2D) materials has recently attracted great interest, due to the rich physics evolving from such structures. Enhancing and tuning the opto–electronic properties of these systems is of high importance for a multitude of applications, such as sensors, memory devices or optical communications. The electrostatic control of photoluminescence of monolayer MoS2 at room temperature via integration of free-standing BaTiO3 (BTO), a ferroelectric perovskite oxide is presented. It is shown that the use of BTO leads to highly tunable exciton emission of MoS2 in a minimal range of gate voltages. Due to BTO's ferroelectric polarization-induced doping, large peak emission shifts as well as a large and tunable A trion binding energy in the range of 40–100 meV are observed. These measurements are compared with those carried out when the BTO is replaced by a hexagonal boron nitride (hBN) dielectric layer, confirming BTO's superior gating properties and thus lower power consumption. Additionally, advantage of the ferroelectric switching of BTO is taken by fabricating devices where the BTO layer is decoupled from the gate electrode with a SiO2 layer. Choosing to isolate the BTO allows to induce large remanent behavior of MoS2’s excitonic features. © 2024 The Author(s). Advanced Functional Materials published by Wiley-VCH GmbH., The authors acknowledge funding from the EU FLAG-ERA project To2Dox (JTC-2019-009), the Comunidad de Madrid through (MAD2D-CM)- UCM project, and the CAIRO-CM project (Y2020/NMT-6661) and the Spanish Ministry of Science and Innovation (Grants PID2020-115566RBI00, PID2020-118078RB-I00, RTI2018-099054-J-I00, IJC2018-038164-I, TED2021-132267B-I00, TED2021-130196B-C21, PRE2018-084818 and PDC2023-145920-I00). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unveiling moiré-induced topological polar structures in freestanding ferroelectric membranes

  • Sánchez Santolino,Gabriel
  • Rouco, Víctor
  • Puebla, Sergio
  • Aramberri, Hugo
  • Zamora, Victor
  • Cuellar, Fabian
  • Munuera, C.
  • Mompean, Federico J.
  • García-Hernández, Mar
  • Castellanos-Gómez, Andrés
  • Íñiguez, Jorge
  • León, Carlos
  • Santamaría, Jacobo
Complex correlated oxides are quantum materials characterized by unshielded d-electrons. Their interaction across competing energy scales leads to diverse functionalities, which can be altered by slight changes of their structure, composition, or boundary conditions [1]. In this context, recent studies on ferroelectric oxides have shown the formation of complex polar topologies, which are related to a delicate interplay between the intrinsic tendency of the material towards a uniform polarization and the electrical and mechanical constraints placed upon them [2]. However, the cube-on-cube epitaxial structure of these materials forces the use of single crystalline substrates for their growth, which restricts the possible mechanical boundary conditions and, therefore, the formation of new topological structures. To overcome this limitation, we have isolated the ferroelectric materials from their parent substrate by a selective chemical exfoliation method, thus obtaining freestanding layers of just a few unit cells in thickness. This new approach vastly increases the potential for novel hetero-integration approaches by stacking various freestanding layers and avoiding the chemical, structural, or thermal limitations of conventional synthesis and growth processes [3]. In this work, we show how a polar vortex pattern is induced by stacking twisted freestanding ferroelectric BaTiO₃ layers [4]. We study the formation of these topological polar structures in relation to the twisted angle and layer thickness by aberration-corrected scanning transmission electron microscopy and density-functional theory calculations. These results show an exciting opportunity to create novel polar topologies using the unique modulations that are possible in moiré bilayers and pave the way for potential applications in future high-density ferroelectric memory devices., This work has been supported by the Regional Government of Madrid CAM through SINERGICO project CAIRO-CM (Y2020/NMT-6661). Authors acknowledge received funding from the EU FLAG-ERA project To2Dox (JTC-2019-009) and the Spanish Ministry of Science and Innovation (grant PID2020-118078RB-I00 and fellowship PRE2018-084818). G.S.-S. acknowledges financial support from the Spanish MCI grant nos. RTI2018-099054-J-I00 (MCI/AEI/FEDER, UE) and IJC2018-038164-I. V.R. was supported by the V PRICIT (Regional Programme of Research and Technological Innovation)., Peer reviewed