Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strong Electrostatic Control of Excitonic Features in MoS2 by a Free-Standing Ultrahigh-κ Ferroelectric Perovskite

  • Pucher, Thomas
  • Puebla, Sergio
  • Zamora, V.
  • Sánchez Viso, Estrella
  • Rouco, V.
  • Leon, C.
  • García-Hernández, Mar
  • Santamaria, J.
  • Munuera, C.
  • Castellanos-Gómez, Andrés
Integrating free-standing complex oxides with two-dimensional (2D) materials has recently attracted great interest, due to the rich physics evolving from such structures. Enhancing and tuning the opto–electronic properties of these systems is of high importance for a multitude of applications, such as sensors, memory devices or optical communications. The electrostatic control of photoluminescence of monolayer MoS2 at room temperature via integration of free-standing BaTiO3 (BTO), a ferroelectric perovskite oxide is presented. It is shown that the use of BTO leads to highly tunable exciton emission of MoS2 in a minimal range of gate voltages. Due to BTO's ferroelectric polarization-induced doping, large peak emission shifts as well as a large and tunable A trion binding energy in the range of 40–100 meV are observed. These measurements are compared with those carried out when the BTO is replaced by a hexagonal boron nitride (hBN) dielectric layer, confirming BTO's superior gating properties and thus lower power consumption. Additionally, advantage of the ferroelectric switching of BTO is taken by fabricating devices where the BTO layer is decoupled from the gate electrode with a SiO2 layer. Choosing to isolate the BTO allows to induce large remanent behavior of MoS2’s excitonic features. © 2024 The Author(s). Advanced Functional Materials published by Wiley-VCH GmbH., The authors acknowledge funding from the EU FLAG-ERA project To2Dox (JTC-2019-009), the Comunidad de Madrid through (MAD2D-CM)- UCM project, and the CAIRO-CM project (Y2020/NMT-6661) and the Spanish Ministry of Science and Innovation (Grants PID2020-115566RBI00, PID2020-118078RB-I00, RTI2018-099054-J-I00, IJC2018-038164-I, TED2021-132267B-I00, TED2021-130196B-C21, PRE2018-084818 and PDC2023-145920-I00). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
Docta Complutense
Publicación Artículo científico (JournalArticle)

Interface magnetism and anomalous Hall effect in <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:mrow> <mml:msub> <mml:mi mathvariant="normal">La</mml:mi> <mml:mrow> <mml:mn>0.7</mml:mn> </mml:mrow> </mml:msub> <mml:msub> <mml:mi mathvariant="normal">Sr</mml:mi> <mml:mrow> <mml:mn>0.3</mml:mn> </mml:mrow> </mml:msub> <mml:mi>Mn</mml:mi> <mml:msub> <mml:mi mathvariant="normal">O</mml:mi> <mml:mn>3</mml:mn> </mml:msub> </mml:mrow> <mml:mo>/</mml:mo> <mml:mrow> <mml:mi>SrIr</mml:mi> <mml:msub> <mml:mi mathvariant="normal">O</mml:mi> <mml:mn>3</mml:mn> </mml:msub> </mml:mrow> </mml:math> bilayers

  • Peralta Somoza, Andrea
  • Woo-Yoo, Myoung
  • Lopez Díaz, Sandra
  • Fuster Rico, Rafael
  • Cabero Piris, Mariona
  • González Calbet, José María
  • Tornos Castillo, Javier
  • Rivera Calzada, Alberto Carlos
  • Mompeán, Federico
  • García Hernández, Mar
  • Charlton, Timothy R.
  • Kirby, Brian J.
  • Rosenkranz, Stephan
  • Haskel, Daniel
  • Choi, Yongseong
  • Strempfer, Joerg
  • Wang, Xiao
  • Sefrioui Khamali, Zouhair
  • León Yebra, Carlos
  • Villegas, Javier E.
  • te Velthuis, Suzanne G. E.
  • Santamaría Sánchez-Barriga, Jacobo
Epitaxial interfaces combining 3d and 5d transition metal oxides are a fertile playground to examine the interplay between topology and electron correlations. In this paper, we explore magnetism and transport of bilayers combining ferromagnetic La0.7⁢Sr0.3⁢Mn⁢O3 and the strong spin-orbit coupling material SrIr⁢O3. We have found an interfacial magnetic proximity effect driving an intrinsic contribution to the anomalous Hall effect of topological origin. The interfacial proximity interaction is enabled by the Mn-O-Ir bonding reconstruction and depends on layer sequence. While bilayers with the La0.7⁢Sr0.3⁢Mn⁢O3 on top featuring a robust Mn magnetism at the interface show the intrinsic AHE contribution, it is absent in bilayers with the inverted layer sequence (SrIr⁢O3 layer on top) showing strongly suppressed magnetism at the interface. These results illustrate the leading role of interfacial atomic reconstructions on the interplay between topology and correlations at 3d/5d oxide interfaces. This finding may be of interest in future oxide topological spintronics and spin-orbitronics.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Automated atomic site determination by four-dimensional scanning transmission electron microscopy data analytics

  • Fernández Cañizares, Francisco
  • Rodríguez Vázquez, Javier
  • Veloso Ferreira, Rafael
  • Tenreiro Villar, Isabel
  • Rivera Calzada, Alberto Carlos
  • Fernando Saavedra, Amalia
  • Sánchez García, Miguel A.
  • Xie, Yong
  • Castellanos Gómez, Andrés
  • Varela Del Arco, María
  • Sánchez Santolino, Gabriel
Automated atomic column detection and identification constitutes an active open front in advanced scanning transmission electron microscopy techniques. In this work we use clustering algorithms in combination with dimensionality reduction techniques to identify specific columns in a series of very different cutting-edge materials, ranging from ultrathin 2D materials to bulk semiconductors or complex oxides, which include different types of columns (heavy and light), and thus pose a challenge towards automated detection. By implementing a three-stage cascaded clustering pipeline, we are able to automatically identify all atomic column sites of our test materials and resolve them from the background interatomic space. This approach could enable new data-driven in-depth analysis of materials, allowing the automatic detection of chemical and structural characteristics of materials.