Pasar al contenido principal

DISPOSITIVOS FLEXIBLES BASADOS EN SEMICONDUCTORES 2D PARA SENSORES DE BAJO COSTE PARA IOT E INDUSTRIA 4.0

PID2023-151946OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Enhanced biaxial compressive strain tuning of 2D semiconductors via hot dry transfer on polymer substrates

  • Cortés-Flores, Álvaro
  • Henríquez-Guerra, Eudomar
  • Almonte, Lisa
  • Gosálbez-Martínez, Daniel
  • Li, Hao
  • Castellanos-Gomez, Andres
  • Calvo, M. Reyes
  • Gosálbez-Martínez, Daniel|||/items/c8907d7c-643e-478e-a2b2-716d2d44f265
Strain engineering is an effective tool for tailoring the properties of two-dimensional (2D) materials, of particular interest for tuning quantum phenomena. Among the limited methods available for strain engineering under cryogenic conditions, thermal mismatch with polymeric substrates provides a simple and affordable strategy to induce biaxial compressive strain upon cooling. In this work, we demonstrate the transfer of unprecedentedly large levels of uniform biaxial compressive strain to single-layer WS2 by employing a pre-straining approach prior to cryogenic cooling. Using a hot-dry-transfer method, single-layer WS2 samples were deposited onto thermally expanded polymeric substrates at 100 °C. As the substrate cools to room temperature (RT), it contracts ∼0.5%, inducing biaxial compressive strain in the WS2 layer. This pre-strain results in a measurable blueshift in excitonic energies compared to samples transferred at RT, which serve as not pre-strained controls. Subsequent cooling of the pre-strained samples from RT down to 5 K leads to a remarkable total blueshift of ∼200 meV in the exciton energies of single-layer WS2. This energy shift surpasses previously reported values, indicating superior levels of biaxial compressive strain induced by the accumulated substrate contraction (∼1.7%). Moreover, our findings reveal a pronounced temperature dependence in strain transfer efficiency, with gauge factors approaching theoretical limits for ideal strain transfer at 5 K. This enhanced efficiency, attributed to the increase of the Young’s modulus of the polymeric substrate with decreasing temperature, is particularly relevant for strain engineering of 2D materials at low temperatures.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct Laser Ablation of 2D Material Films for Fabricating Multi-Functional Flexible and Transparent Devices

  • Sözen, Yiğit
  • Ryu, Yu K.
  • Martínez, Javier
  • Castellanos-Gómez, Andrés
A scalable method is presented for direct patterning of graphite and transition metal dichalcogenide (TMD) films on polycarbonate (PC) and other transparent substrates using fiber laser ablation. This process facilitates the fabrication of various functional devices, including strain gauges, supercapacitors, and photodetector arrays, without the need for photolithography or solvents, thereby simplifying device production and enhancing environmental sustainability. Utilizing roll-to-roll mechanical exfoliation, homogeneous nanosheet films are created and then patterned with a laser engraving system. Electrical and optical characterization confirms that the laser-processed films maintain their crystallinity, with no observable damage to the underlying substrate. The scalability of this approach is demonstrated by constructing a WSe<inf>2</inf>/graphite photodetector array on PC, which exhibits high sensitivity, low noise, and uniform photocurrent response across its active channels. As a proof-of-concept, this array is used as an image sensor to capture light patterns, showcasing its potential for flexible and semi-transparent imaging applications. These findings open up new avenues for incorporating all-van der Waals devices into wearable electronics, optoelectronics, and imaging technologies. © 2025 Elsevier B.V., All rights reserved., This work was funded by the Ministry of Science and Innovation(Spain) through the projects TED2021-132267B-I00, PID2020-115566RB-I00, PRE2021-098348, PID2023-151946OB-I00, and PDC2023-145920-I00.The authors also acknowledge funding from the European Research Coun-cil (ERC) through the ERC-PoC 2024, StEnSo project (grant agreement no.101185235), the FLAG-ERA program (JTC 2019) under the project To2Dox(PCI2019-111893-2), the Comunidad de Madrid through the CAIRO-CMproject (Y2020/NMT6661), and the CSIC program for the Spanish Recov-ery, Transformation and Resilience Plan funded by the Recovery and Re-silience Facility of the European Union, established by the Regulation (EU)2020/2094, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced strain transfer and optoelectronic performance in MoS2 devices via Formvar encapsulation

  • Vladimirov, Simeon N.
  • Cakiroglu, Onur
  • Munuera, C.
  • Castellanos-Gómez, Andrés
  • Vasconcelos, Thiago L.
4 figures, We systematically investigate the influence of polyvinyl formal (PVFM), commonly known as Formvar, in comparison to polycarbonate (PC) and polymethyl methacrylate (PMMA), as encapsulation materials on the strain performance of MoS2 monolayer and bilayer flakes on flexible polypropylene (PP) substrates. Notably, optical differential reflectance measurements reveal that PVFM and PMMA encapsulation significantly enhances the mechanical and thermal strain gauge factors by approximately 2-fold (up to ∼−50 meV/%) and 6-fold (up to ∼−1.5 meV/°C), respectively, while PC shows a slightly lower enhancement. Moreover, all three polymers increase the maximum achievable strain from approximately 1.4% to 2.3%. Furthermore, devices fabricated on PP substrates exhibit improved optoelectronic performance when encapsulated with PVFM, including increased and faster photocurrent response and extended device lifetime., The Ministry of Science and Innovation (Spain) through the projects PID2020-115566RB-I00, TED2021-132267B-I00, PDC2023-145920-I00 and PID2023-151946OB-I00. The authors also acknowledge funding from the Comunidad de Madrid through the CAIRO-CM Project (Y2020/NMT-6661), European Union’s Horizon 2020 research and innovation program under the Grant Agreement 956813 (2Exciting) and European Research Council (ERC) through the project ERC-PoC 2024 project StEnSo (grant agreement no. 101185235)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Low-Cost Maskless Photolithography Using an LCD-3D Printer for Microelectronic Devices

  • Wu, Qianqian
  • Zhang, Yan
  • Pucher, Thomas
  • McLarnon, B
  • Zamora-Amo, Esteban
  • Zhang, Peng
  • Xie, Yong
  • Castellanos-Gómez, Andrés
A cost-effective and flexible approach is presented to maskless photolithography using a commercial Liquid Crystal Display (LCD)-based Masked Stereolithography Apparatus (MSLA) 3D printer. This method enables rapid and flexible patterning of photoresist-coated silicon wafers without the need for traditional photomasks, as well as the fabrication of large-area wafer-scale electrode arrays, offering a highly accessible alternative for microdevice fabrication. The process achieves spatial resolution approaching 20 µm and is demonstrated in the fabrication of gold electrodes for two-dimensional (2D) material-based transistors. The electrodes are used to integrate MoS2 flakes, transferred via an all-dry deterministic method to fabricate field effect transistors and photodetectors. The results confirm that LCD-based lithography can produce high-quality devices comparable to those fabricated with conventional photolithography equipment, making it an attractive solution for low-cost, high-precision microfabrication. © 2025 The Author(s). Small Methods published by Wiley-VCH GmbH., The authors acknowledge Dr. Carmen Munuera for her support with theatomic force microscopy characterization of the produced electrodes.This work was funded by the Ministry of Science and Innovation (Spain)through the projects PDC2023-145920-I00 and PID2023-151946OB-I00)and the European Research Council through the ERC-2024-PoC StEnSo(grant agreement 101185235) and the ERC-2024-SyG SKIN2DTRONICS(grant agreement 101167218). Supported by the China Scholarship Coun-cil program (Project ID: 202406790090, 202408360065), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strain control of the electronic structure in WS2homobilayers with 0° and 60° stacking angles

  • Jadriško, V.
  • Landa-Garcia, I.
  • Novko, D.
  • Radatović, B.
  • Lei, Q.
  • Vujičić, N.
  • Gadermaier, C.
  • Castellanos-Gómez, Andrés
  • Xie, Yong
Two-dimensional transition metal dichalcogenides combine attractive semiconductor properties with exceptionally strong light–matter interaction. Their mechanical robustness allows the modulation of their optical and electronic functionalities via strain. Bilayers introduce the stacking angle as an additional parameter, whose role in the strain response is still elusive. Here, we combine differential reflectance spectroscopy and density functional theory calculations to explore the strain response of WS2 homobilayers with 0° and 60° stacking angles. The change of the excitonic resonance energies and linewidths depends on the stacking angle, highlighting the scope for the manipulation of the electronic structure of two-dimensional semiconductors via the synergistic harnessing of the strain and angle control parameters. This journal is © The Royal Society of Chemistry, 2026, This work received funding from the European Union's Horizon 2020 research and innovation program under grant agreement 956813 (2Exciting). D. N. and N. V. acknowledge support by the Centre of Excellence for Advanced Materials and Sensing Devices (Grant No. KK.01.1.1.01.0001) and Centre for Advanced Laser Techniques (Grant No. KK.01.1.1.05.0001) co-financed by the Croatian Government and the European Union through the European Regional Development Fund – Competitiveness and Cohesion Operational Program. A.C-G. acknowledges support from Grants PDC2023-145920-I00 and PID2023-151946OB-I00, funded by MICIU/AEI/10.13039/501100011033 and, respectively, by the European Union NextGenerationEU/PRTR (PDC2023-145920-I00) and by ERDF/EU (PID2023-151946OB-I00). A.C-G. also acknowledges funding from the European Research Council (ERC) through the ERC-PoC 2024 StEnSo project (grant agreement 101185235). ICMM-CSIC authors acknowledges support from the Severo Ochoa Centres of Excellence program through Grant CEX2024-001445-S, funded by MICIU/AEI/10.13039/501100011033. This work was supported by the Open Fund of State Key Laboratory of Infrared Physics (Grant No. SITP-NLIST-ZD-2024-01). I. L.-G., V. J. and C. G. acknowledge support by the PRIN 2020 project Conquest funded by the Italian Ministry of University and Research (Prot. 2020JZ5N9M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Toward Full Autonomous Laboratory Instrumentation Control with Large Language Models

  • Xie, Yong
  • He, Kexin
  • Castellanos-Gómez, Andrés
The control of complex laboratory instrumentation often requires significant programming expertise, creating a barrier for researchers lacking computational skills. This work explores the potential of large language models (LLMs), such as ChatGPT, to enable efficient programming and automation of scientific equipment. Through a case study involving the implementation of a setup that can be used as a single-pixel camera or a scanning photocurrent microscope, it is demonstrated how ChatGPT can facilitate the creation of custom scripts for instrumentation control, significantly reducing the technical barrier for experimental customization. Building on this capability, it is further illustrated how LLM-assisted tools can be used to develop autonomous agents capable of independently operating laboratory instruments. This approach underscores the transformative role of LLM-based tools in democratizing laboratory automation and accelerating scientific progress. © 2025 The Author(s). Small Structures published by Wiley-VCH GmbH., This work was supported by the Open Fund of State Key Laboratory of Infrared Physics (grant no. SITP-NLIST-ZD-2024-01). A.C.-G. acknowl-edges funding by the Ministry of Science and Innovation (Spain) through the projects TED2021-132267B-I00, PID2020-115566RB-I00, PDC2023-145920-I00, and PID2023-151946OB-I00 and the European Research Council through the ERC-2024-PoC StEnSo (grant agreement101185235) and the ERC-2024-SyG SKIN2DTRONICS (grant agreement101167218). The author (Y.X.) acknowledges Prof. Ju Li (MIT) andDr. Álvaro Blanco (ICMM-CSIC) for enlightening discussion., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strain Engineering of Correlated Charge-Ordered Phases in 1T-TaS2

  • Luque-Merino, Rafael
  • Carrascoso Plana, Félix
  • Henríquez-Guerra, E.
  • Calvo, M.R.
  • Frisenda, R.
  • Castellanos-Gómez, Andrés
Strain engineering is a powerful strategy for controlling the structural and electronic properties of two-dimensional materials, particularly in systems hosting charge density wave (CDW) order. In this work, we apply uniaxial tensile and compressive strain to thin 1T-TaS2flakes using a flexible, device-compatible platform and systematically investigate the strain-dependent behavior of the nearly commensurate (NC) to incommensurate (IC) CDW phase transition. This transition is driven by Joule heating at room temperature. Electrical transport measurements reveal that both the switching threshold voltage and the resistance of the NC-CDW phase exhibit clear, reversible strain dependence. Furthermore, we identify a quadratic dependence between the strain-induced resistance change and the threshold voltage, confirming that piezoresistive modulation governs the strain tunability of the phase transition. We demonstrate a room-temperature, electrical readout strain and displacement sensor with a threshold-like response in a programmable window. These results highlight the potential of 1T-TaS2for on-chip sensing of strain and displacement. © 2025 The Authors. Published by American Chemical Society, A.C.-G. acknowledges funding by the Ministry of Science and Innovation (Spain) through Projects PDC2023-145920-I00 and PID2023-151946OB-I00 and the European Research Council through the ERC-2024-PoC StEnSo (Grant Agreement 101185235) and the ERC-2024-SyG SKIN2DTRONICS. R.L.M. and A.C.-G. acknowledge the Severo Ochoa Centres of Excellence program through Grant CEX2024-001445-S. M.R.C. acknowledges funding from PID2023-146354NB-C44 (funded by MICIU/AEI/10.13039/501100011033) and from EU FEDER. M.R.C. and E.H.-G. acknowledge CNS2023-145151 (funded by MICIU/AEI/10.13039/501100011033 and EU NextGenerationEU/PRTR). R.F. acknowledges funding from Ministero dell’Università e della Ricerca (MUR) through the PRIN Grant 2D-PentaSensing (P2022HT3FF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optoelectronic synaptic characteristics of a van der Waals WS2/PdSe2 heterostructure

  • Viscardi, L.
  • Mazzotti, A.
  • Durante, O.
  • Pucher, Thomas
  • Martucciello, N.
  • Castellanos-Gómez, Andrés
  • Bartolomeo, A.D.
Two-dimensional van der Waals heterostructures provide a versatile platform for multifunctional optoelectronic devices. WS2/PdSe2 heterostructures, characterized by n-type conductive behavior, exhibit persistent photoconductivity in high vacuum under negative gate voltages. This phenomenon has been leveraged to simulate synaptic functions of the human brain, including short- and long-term plasticity. Short-term plasticity was simulated, resulting in paired-pulse facilitation and post-tetanic potentiation indices of approximately 140% and 300%, respectively. By stimulating the WS2/PdSe2 heterostructure with consecutive 1 s light pulses, the learning, forgetting, and re-learning phases associated with knowledge acquisition in the human brain were replicated. Furthermore, the device was demonstrated as an optoelectronic memory, programmable with light pulses and erasable via electrical pulses on the gate electrode. © 2025 The Author(s). Published by IOP Publishing Ltd., A.D.B. thanks the University of Salerno, Italy, for funding this project through Grant ORSA243813. A.C.G. acknowledges funding by the Ministry of Science and Innovation (Spain) through the projects TED2021-132267B-I00, PID2020-115566RB-I00, PDC2023-145920-I00 and PID2023-151946OB-I00), and the European Research Council through the ERC-2024-PoC StEnSo (grant agreement 101185235)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strain Engineering of Magnetoresistance and Magnetic Anisotropy in CrSBr

  • Henríquez-Guerra, E.
  • Ruiz, A.M.
  • Galbiati, M.
  • Cortés-Flores, Á.
  • Brown, D.
  • Zamora-Amo, Esteban
  • Almonte, L.
  • Shumilin, A.
  • Salvador-Sánchez, J.
  • Pérez-Rodríguez, A.
  • Orue, I.
  • Cantarero, A.
  • Castellanos-Gómez, Andrés
  • Mompean, Federico J.
  • García-Hernández, Mar
  • Navarro-Moratalla, E.
  • Diez, E.
  • Amado, M.
  • Baldoví, J.J.
  • Calvo, M.R.
Tailoring magnetoresistance and magnetic anisotropy in van der Waals magnetic materials is essential for advancing their integration into technological applications. In this regard, strain engineering has emerged as a powerful and versatile strategy to control magnetism at the 2D limit. Here, it is demonstrated that compressive biaxial strain significantly enhances the magnetoresistance and magnetic anisotropy of few-layer CrSBr flakes. Strain is efficiently transferred to the flakes from the thermal compression of a polymeric substrate upon cooling, as confirmed by temperature-dependent Raman spectroscopy. This strain induces a remarkable increase in the magnetoresistance ratio and in the saturation fields required to align the magnetization of CrSBr along each of its three crystalographic directions, reaching a twofold enhancement along the magnetic easy axis. This enhancement is accompanied by a subtle reduction of the Néel temperature by ≈10 K. The experimental results are fully supported by first-principles calculations, which link the observed effects to a strain-driven modification in interlayer exchange coupling and magnetic anisotropy energy. These findings establish strain engineering as a key tool for fine-tuning magnetotransport properties in 2D magnetic semiconductors, paving the way for implementation in spintronics and information storage devices. © 2025 The Author(s). Advanced Materials published by Wiley-VCH GmbH., Generalitat Valenciana. Grant Numbers: CISEJI/2023/45, CIDEXG/2023/1 Spanish government. Grant Numbers: RED2022-134448-T, PID2023-146354NB-C41, PID2023-146354NB-C44, PID2022-136285NB-C32, PDC2023-145920-I00, PID2023-151946OB-I00, TED2021-132267B-I00, CNS2023-145151, CEX2019-000919-M, FPU21/04195, RYC2018-024736-I, RYC2021-034609-I Spanish Unidad de Excelencia “María de Maeztu” European Research Council Horizon 2020 research and innovation program European Union. Grant Numbers: ERC-2024-PoC-101185235-StEnSo, ERC-2021-StG-101042680 2D-SMARTiES, ERC-2018-StG-803092EMAGIN2D Spanish MIU FEDER/Junta de Castilla y León Research. Grant Number: SA106P23 USAL4Excellence program. Grant Number: 101034371, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fast prototyping of memristors for ReRAMs and neuromorphic computing

  • Marraccini, G.
  • Strangio, S.
  • Dimaggio, E.
  • Sargeni, R.
  • Pieri, F.
  • Sozen, Yigit
  • Castellanos-Gómez, Andrés
  • Fiori, G.
The growing demand for energy-efficient computing in artificial intelligence requires novel memory technologies capable of storing and processing information. Memristors stand out in thanks to their ability to store information, mimic synaptic behavior and support in-memory computing architectures while requiring minimal active areas and energy consumptions. Here is presented a scalable and cost-effective approach to fabricate Ag/MoS2/Au memristors as resistive switching memory devices by combining roll-to-roll mechanical exfoliation of two-dimensional materials with inkjet printing. These devices exhibit reliable non-volatile switching behavior attributed to the formation and dissolution of metallic conductive filaments within the MoS2 layer, with high resistance ratios and robust retention times. A fully-connected neural networks is simulated using quantized weights mapped onto a virtual memristor crossbar array demonstrating that classification tasks can be performed with high accuracy even with limited bit-width precision, highlighting the potential of these devices for energy-efficient, high-throughput AI hardware. This journal is © The Royal Society of Chemistry, 2026, Authors gratefully acknowledge financial support from the ERC SKIN2DTRONICS (Contract Number 101167218) and the ENERGIZE (Contract Number 101194458) projects. Authors gratefully acknowledge also the Italian Ministry of Education and Research (MIUR) in the framework of the FoReLab project (Departments of Excellence) and the Piano Nazionale di Ricerca e Resilienza - PNRR (CN00000013). This work was also funded by the Ministry of Science and Innovation (Spain) through the projects (PDC2023-145920-I00 and PID2023-151946OB-I00) and the Severo Ochoa Centres of Excellence Program through Grant CEX2024-001445-S and the European Research Council through the ERC-2024-PoC StEnSo (grant agreement 101185235). The graphical abstract and Fig. 1, 2, and 4 were created, in part, with Blender via Blender Foundation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Van der Waals WS2/PdSe2 heterostructure as a visible-light photodetector and pressure optoelectronic sensor

  • Viscardi, Loredana
  • Mazzotti, Adolfo
  • Durante, Ofelia
  • Pucher, Thomas
  • Martucciello, Nadia
  • Castellanos-Gómez, Andrés
  • Di Bartolomeo, Antonio
Two-dimensional van der Waals heterostructures offer a versatile platform for developing multifunctional optoelectronic devices, as their tuneable electronic and optical properties enable a wide range of applications. Among them, WS2/PdSe2 heterostructures exhibit attractive features, making them promising candidates for the realisation of broadband photodetectors and pressure optoelectronic sensors. In this study, WS2/PdSe2 heterostructures were fabricated and electrically characterised under different environmental and light conditions. WS2/PdSe2 heterostructures exhibit n-type conduction with an impressive ON/OFF current ratio up to 108, demonstrating their suitability for high-performance electronic devices. Their electrical properties were extensively investigated under different pressure conditions, from ambient pressure to high vacuum (103–10−4 mbar), both in the dark and under illumination. The results reveal that the adsorption and desorption of water and oxygen molecules on the materials’ surface play a crucial role in modulating the electrical response of the WS2/PdSe2 heterostructure. Analysis of the light response in the visible spectrum reveals a responsivity of up to 1.2 A W−1 at a wavelength of 620 nm. WS2/PdSe2-based devices were further tested as pressure optoelectronic sensors, monitoring the photocurrent evolution during transitions between high vacuum and ambient pressure. These findings open the way for various applications in the field of optoelectronics and sensing., A.D.B. thanks the University of Salerno, Italy, for funding this project through Grant ORSA243813. A.C.G. acknowledges funding by the Ministry of Science and Innovation (Spain) through the Projects TED2021-132267B-I00, PID2020-115566RB-I00, PDC2023-145 920-I00 and PID2023-151946OB-I00, and the European Research Council through the ERC-2024-PoC StEnSo (grant agreement 101185235)., Peer reviewed
Docta Complutense
Publicación Artículo científico (JournalArticle)

Automated atomic site determination by four-dimensional scanning transmission electron microscopy data analytics

  • Fernández Cañizares, Francisco
  • Rodríguez Vázquez, Javier
  • Veloso Ferreira, Rafael
  • Tenreiro Villar, Isabel
  • Rivera Calzada, Alberto Carlos
  • Fernando Saavedra, Amalia
  • Sánchez García, Miguel A.
  • Xie, Yong
  • Castellanos Gómez, Andrés
  • Varela Del Arco, María
  • Sánchez Santolino, Gabriel
Automated atomic column detection and identification constitutes an active open front in advanced scanning transmission electron microscopy techniques. In this work we use clustering algorithms in combination with dimensionality reduction techniques to identify specific columns in a series of very different cutting-edge materials, ranging from ultrathin 2D materials to bulk semiconductors or complex oxides, which include different types of columns (heavy and light), and thus pose a challenge towards automated detection. By implementing a three-stage cascaded clustering pipeline, we are able to automatically identify all atomic column sites of our test materials and resolve them from the background interatomic space. This approach could enable new data-driven in-depth analysis of materials, allowing the automatic detection of chemical and structural characteristics of materials.