Pasar al contenido principal

OPTIMIZACION DE PROPIEDADES ESTRUCTURALES, ELECTRICAS, MAGNETICAS Y OPTOELECTRONICAS EN MATERIALES 2D MEDIANTE INGENIERIA DE DEFORMACION

PID2023-146354NB-C44

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario FUNDACION BCMATERIALS-BASQUE CENTER FOR MATERIALS, APPLICATIONS AND NANOSTRUCTURES

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Enhanced biaxial compressive strain tuning of 2D semiconductors via hot dry transfer on polymer substrates

  • Cortés-Flores, Álvaro
  • Henríquez-Guerra, Eudomar
  • Almonte, Lisa
  • Gosálbez-Martínez, Daniel
  • Li, Hao
  • Castellanos-Gomez, Andres
  • Calvo, M. Reyes
  • Gosálbez-Martínez, Daniel|||/items/c8907d7c-643e-478e-a2b2-716d2d44f265
Strain engineering is an effective tool for tailoring the properties of two-dimensional (2D) materials, of particular interest for tuning quantum phenomena. Among the limited methods available for strain engineering under cryogenic conditions, thermal mismatch with polymeric substrates provides a simple and affordable strategy to induce biaxial compressive strain upon cooling. In this work, we demonstrate the transfer of unprecedentedly large levels of uniform biaxial compressive strain to single-layer WS2 by employing a pre-straining approach prior to cryogenic cooling. Using a hot-dry-transfer method, single-layer WS2 samples were deposited onto thermally expanded polymeric substrates at 100 °C. As the substrate cools to room temperature (RT), it contracts ∼0.5%, inducing biaxial compressive strain in the WS2 layer. This pre-strain results in a measurable blueshift in excitonic energies compared to samples transferred at RT, which serve as not pre-strained controls. Subsequent cooling of the pre-strained samples from RT down to 5 K leads to a remarkable total blueshift of ∼200 meV in the exciton energies of single-layer WS2. This energy shift surpasses previously reported values, indicating superior levels of biaxial compressive strain induced by the accumulated substrate contraction (∼1.7%). Moreover, our findings reveal a pronounced temperature dependence in strain transfer efficiency, with gauge factors approaching theoretical limits for ideal strain transfer at 5 K. This enhanced efficiency, attributed to the increase of the Young’s modulus of the polymeric substrate with decreasing temperature, is particularly relevant for strain engineering of 2D materials at low temperatures.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strain Engineering of Correlated Charge-Ordered Phases in 1T-TaS2

  • Luque-Merino, Rafael
  • Carrascoso Plana, Félix
  • Henríquez-Guerra, E.
  • Calvo, M.R.
  • Frisenda, R.
  • Castellanos-Gómez, Andrés
Strain engineering is a powerful strategy for controlling the structural and electronic properties of two-dimensional materials, particularly in systems hosting charge density wave (CDW) order. In this work, we apply uniaxial tensile and compressive strain to thin 1T-TaS2flakes using a flexible, device-compatible platform and systematically investigate the strain-dependent behavior of the nearly commensurate (NC) to incommensurate (IC) CDW phase transition. This transition is driven by Joule heating at room temperature. Electrical transport measurements reveal that both the switching threshold voltage and the resistance of the NC-CDW phase exhibit clear, reversible strain dependence. Furthermore, we identify a quadratic dependence between the strain-induced resistance change and the threshold voltage, confirming that piezoresistive modulation governs the strain tunability of the phase transition. We demonstrate a room-temperature, electrical readout strain and displacement sensor with a threshold-like response in a programmable window. These results highlight the potential of 1T-TaS2for on-chip sensing of strain and displacement. © 2025 The Authors. Published by American Chemical Society, A.C.-G. acknowledges funding by the Ministry of Science and Innovation (Spain) through Projects PDC2023-145920-I00 and PID2023-151946OB-I00 and the European Research Council through the ERC-2024-PoC StEnSo (Grant Agreement 101185235) and the ERC-2024-SyG SKIN2DTRONICS. R.L.M. and A.C.-G. acknowledge the Severo Ochoa Centres of Excellence program through Grant CEX2024-001445-S. M.R.C. acknowledges funding from PID2023-146354NB-C44 (funded by MICIU/AEI/10.13039/501100011033) and from EU FEDER. M.R.C. and E.H.-G. acknowledge CNS2023-145151 (funded by MICIU/AEI/10.13039/501100011033 and EU NextGenerationEU/PRTR). R.F. acknowledges funding from Ministero dell’Università e della Ricerca (MUR) through the PRIN Grant 2D-PentaSensing (P2022HT3FF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strain Engineering of Magnetoresistance and Magnetic Anisotropy in CrSBr

  • Henríquez-Guerra, E.
  • Ruiz, A.M.
  • Galbiati, M.
  • Cortés-Flores, Á.
  • Brown, D.
  • Zamora-Amo, Esteban
  • Almonte, L.
  • Shumilin, A.
  • Salvador-Sánchez, J.
  • Pérez-Rodríguez, A.
  • Orue, I.
  • Cantarero, A.
  • Castellanos-Gómez, Andrés
  • Mompean, Federico J.
  • García-Hernández, Mar
  • Navarro-Moratalla, E.
  • Diez, E.
  • Amado, M.
  • Baldoví, J.J.
  • Calvo, M.R.
Tailoring magnetoresistance and magnetic anisotropy in van der Waals magnetic materials is essential for advancing their integration into technological applications. In this regard, strain engineering has emerged as a powerful and versatile strategy to control magnetism at the 2D limit. Here, it is demonstrated that compressive biaxial strain significantly enhances the magnetoresistance and magnetic anisotropy of few-layer CrSBr flakes. Strain is efficiently transferred to the flakes from the thermal compression of a polymeric substrate upon cooling, as confirmed by temperature-dependent Raman spectroscopy. This strain induces a remarkable increase in the magnetoresistance ratio and in the saturation fields required to align the magnetization of CrSBr along each of its three crystalographic directions, reaching a twofold enhancement along the magnetic easy axis. This enhancement is accompanied by a subtle reduction of the Néel temperature by ≈10 K. The experimental results are fully supported by first-principles calculations, which link the observed effects to a strain-driven modification in interlayer exchange coupling and magnetic anisotropy energy. These findings establish strain engineering as a key tool for fine-tuning magnetotransport properties in 2D magnetic semiconductors, paving the way for implementation in spintronics and information storage devices. © 2025 The Author(s). Advanced Materials published by Wiley-VCH GmbH., Generalitat Valenciana. Grant Numbers: CISEJI/2023/45, CIDEXG/2023/1 Spanish government. Grant Numbers: RED2022-134448-T, PID2023-146354NB-C41, PID2023-146354NB-C44, PID2022-136285NB-C32, PDC2023-145920-I00, PID2023-151946OB-I00, TED2021-132267B-I00, CNS2023-145151, CEX2019-000919-M, FPU21/04195, RYC2018-024736-I, RYC2021-034609-I Spanish Unidad de Excelencia “María de Maeztu” European Research Council Horizon 2020 research and innovation program European Union. Grant Numbers: ERC-2024-PoC-101185235-StEnSo, ERC-2021-StG-101042680 2D-SMARTiES, ERC-2018-StG-803092EMAGIN2D Spanish MIU FEDER/Junta de Castilla y León Research. Grant Number: SA106P23 USAL4Excellence program. Grant Number: 101034371, Peer reviewed