Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Enhanced biaxial compressive strain tuning of 2D semiconductors via hot dry transfer on polymer substrates

  • Cortés-Flores, Álvaro
  • Henríquez-Guerra, Eudomar
  • Almonte, Lisa
  • Gosálbez-Martínez, Daniel
  • Li, Hao
  • Castellanos-Gomez, Andres
  • Calvo, M. Reyes
  • Gosálbez-Martínez, Daniel|||/items/c8907d7c-643e-478e-a2b2-716d2d44f265
Strain engineering is an effective tool for tailoring the properties of two-dimensional (2D) materials, of particular interest for tuning quantum phenomena. Among the limited methods available for strain engineering under cryogenic conditions, thermal mismatch with polymeric substrates provides a simple and affordable strategy to induce biaxial compressive strain upon cooling. In this work, we demonstrate the transfer of unprecedentedly large levels of uniform biaxial compressive strain to single-layer WS2 by employing a pre-straining approach prior to cryogenic cooling. Using a hot-dry-transfer method, single-layer WS2 samples were deposited onto thermally expanded polymeric substrates at 100 °C. As the substrate cools to room temperature (RT), it contracts ∼0.5%, inducing biaxial compressive strain in the WS2 layer. This pre-strain results in a measurable blueshift in excitonic energies compared to samples transferred at RT, which serve as not pre-strained controls. Subsequent cooling of the pre-strained samples from RT down to 5 K leads to a remarkable total blueshift of ∼200 meV in the exciton energies of single-layer WS2. This energy shift surpasses previously reported values, indicating superior levels of biaxial compressive strain induced by the accumulated substrate contraction (∼1.7%). Moreover, our findings reveal a pronounced temperature dependence in strain transfer efficiency, with gauge factors approaching theoretical limits for ideal strain transfer at 5 K. This enhanced efficiency, attributed to the increase of the Young’s modulus of the polymeric substrate with decreasing temperature, is particularly relevant for strain engineering of 2D materials at low temperatures.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced strain transfer and optoelectronic performance in MoS2 devices via Formvar encapsulation

  • Vladimirov, Simeon N.
  • Cakiroglu, Onur
  • Munuera, C.
  • Castellanos-Gómez, Andrés
  • Vasconcelos, Thiago L.
4 figures, We systematically investigate the influence of polyvinyl formal (PVFM), commonly known as Formvar, in comparison to polycarbonate (PC) and polymethyl methacrylate (PMMA), as encapsulation materials on the strain performance of MoS2 monolayer and bilayer flakes on flexible polypropylene (PP) substrates. Notably, optical differential reflectance measurements reveal that PVFM and PMMA encapsulation significantly enhances the mechanical and thermal strain gauge factors by approximately 2-fold (up to ∼−50 meV/%) and 6-fold (up to ∼−1.5 meV/°C), respectively, while PC shows a slightly lower enhancement. Moreover, all three polymers increase the maximum achievable strain from approximately 1.4% to 2.3%. Furthermore, devices fabricated on PP substrates exhibit improved optoelectronic performance when encapsulated with PVFM, including increased and faster photocurrent response and extended device lifetime., The Ministry of Science and Innovation (Spain) through the projects PID2020-115566RB-I00, TED2021-132267B-I00, PDC2023-145920-I00 and PID2023-151946OB-I00. The authors also acknowledge funding from the Comunidad de Madrid through the CAIRO-CM Project (Y2020/NMT-6661), European Union’s Horizon 2020 research and innovation program under the Grant Agreement 956813 (2Exciting) and European Research Council (ERC) through the project ERC-PoC 2024 project StEnSo (grant agreement no. 101185235)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fast prototyping of memristors for ReRAMs and neuromorphic computing

  • Marraccini, G.
  • Strangio, S.
  • Dimaggio, E.
  • Sargeni, R.
  • Pieri, F.
  • Sozen, Yigit
  • Castellanos-Gómez, Andrés
  • Fiori, G.
The growing demand for energy-efficient computing in artificial intelligence requires novel memory technologies capable of storing and processing information. Memristors stand out in thanks to their ability to store information, mimic synaptic behavior and support in-memory computing architectures while requiring minimal active areas and energy consumptions. Here is presented a scalable and cost-effective approach to fabricate Ag/MoS2/Au memristors as resistive switching memory devices by combining roll-to-roll mechanical exfoliation of two-dimensional materials with inkjet printing. These devices exhibit reliable non-volatile switching behavior attributed to the formation and dissolution of metallic conductive filaments within the MoS2 layer, with high resistance ratios and robust retention times. A fully-connected neural networks is simulated using quantized weights mapped onto a virtual memristor crossbar array demonstrating that classification tasks can be performed with high accuracy even with limited bit-width precision, highlighting the potential of these devices for energy-efficient, high-throughput AI hardware. This journal is © The Royal Society of Chemistry, 2026, Authors gratefully acknowledge financial support from the ERC SKIN2DTRONICS (Contract Number 101167218) and the ENERGIZE (Contract Number 101194458) projects. Authors gratefully acknowledge also the Italian Ministry of Education and Research (MIUR) in the framework of the FoReLab project (Departments of Excellence) and the Piano Nazionale di Ricerca e Resilienza - PNRR (CN00000013). This work was also funded by the Ministry of Science and Innovation (Spain) through the projects (PDC2023-145920-I00 and PID2023-151946OB-I00) and the Severo Ochoa Centres of Excellence Program through Grant CEX2024-001445-S and the European Research Council through the ERC-2024-PoC StEnSo (grant agreement 101185235). The graphical abstract and Fig. 1, 2, and 4 were created, in part, with Blender via Blender Foundation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Van der Waals WS2/PdSe2 heterostructure as a visible-light photodetector and pressure optoelectronic sensor

  • Viscardi, Loredana
  • Mazzotti, Adolfo
  • Durante, Ofelia
  • Pucher, Thomas
  • Martucciello, Nadia
  • Castellanos-Gómez, Andrés
  • Di Bartolomeo, Antonio
Two-dimensional van der Waals heterostructures offer a versatile platform for developing multifunctional optoelectronic devices, as their tuneable electronic and optical properties enable a wide range of applications. Among them, WS2/PdSe2 heterostructures exhibit attractive features, making them promising candidates for the realisation of broadband photodetectors and pressure optoelectronic sensors. In this study, WS2/PdSe2 heterostructures were fabricated and electrically characterised under different environmental and light conditions. WS2/PdSe2 heterostructures exhibit n-type conduction with an impressive ON/OFF current ratio up to 108, demonstrating their suitability for high-performance electronic devices. Their electrical properties were extensively investigated under different pressure conditions, from ambient pressure to high vacuum (103–10−4 mbar), both in the dark and under illumination. The results reveal that the adsorption and desorption of water and oxygen molecules on the materials’ surface play a crucial role in modulating the electrical response of the WS2/PdSe2 heterostructure. Analysis of the light response in the visible spectrum reveals a responsivity of up to 1.2 A W−1 at a wavelength of 620 nm. WS2/PdSe2-based devices were further tested as pressure optoelectronic sensors, monitoring the photocurrent evolution during transitions between high vacuum and ambient pressure. These findings open the way for various applications in the field of optoelectronics and sensing., A.D.B. thanks the University of Salerno, Italy, for funding this project through Grant ORSA243813. A.C.G. acknowledges funding by the Ministry of Science and Innovation (Spain) through the Projects TED2021-132267B-I00, PID2020-115566RB-I00, PDC2023-145 920-I00 and PID2023-151946OB-I00, and the European Research Council through the ERC-2024-PoC StEnSo (grant agreement 101185235)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biotite as a natural layered dielectric for two-dimensional transistors and memristors

  • Pucher, Thomas
  • Hernández-Ruiz, Julia
  • Munuera, C.
  • Castellanos-Gómez, Andrés
The integration of natural layered minerals into van der Waals heterostructures offers a scalable and earth-abundant route to high-performance 2D electronics. Here, we explore biotite, an ion-rich member of the mica family, as a multifunctional building block in ultrathin device architectures. Mechanically exfoliated biotite flakes are incorporated as gate dielectrics in monolayer MoS2 field-effect transistors, yielding low transfer hysteresis (20 mV) and field-effect mobilities around 10 cm2 V−1 s−1 in all-van der Waals configurations with graphite contacts. The same platform supports high-performance photodetection, with responsivities up to 392 AW−1 and rise times of ~20 ms. Biotite is also implemented as an active switching material in metal-insulator-metal memristors, where silver filament formation drives reproducible bipolar resistive switching across more than 104 cycles with memory windows of 102–104 Ω. By inverting the electrode bias configuration, the same device transitions from non-volatile to volatile threshold switching, which is especially relevant for neuromorphic device applications. Switching voltages scale with flake thickness, reaching below 0.5 V for 6 nm devices. Together, these findings reveal biotite as a promising natural layered 2D dielectric, unlocking new device functionalities in 2D transistors and memristors., The authors would like to thank Beatriz H. Juárez for her help with the UV–Vis absorption measurements and Ismael Ballesteros Jiménez and Nuria Jiménez-Arévalo for their help with SEM-EDX acquisition. We acknowledge support from Grant PID2023-151946OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF/EU. We also acknowledge funding from the European Research Council (ERC) through the ERC-2024-PoC StEnSo project (Grant Agreement 101185235) and the ERC-2024-SyG SKIN2DTRONICS project (Grant Agreement 101167218). ICMM-CSIC authors also acknowledge support from the Severo Ochoa Centres of Excellence program through Grant CEX2024-001445-S, funded by MICIU/AEI/10.13039/501100011033. J. Hernandez-Ruiz acknowledges funding from the Spanish Ministry of Science and Innovation through the PRE2002-105538 grant., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2024-001445-S)., Peer reviewed
Docta Complutense
Publicación Artículo científico (JournalArticle)

Automated atomic site determination by four-dimensional scanning transmission electron microscopy data analytics

  • Fernández Cañizares, Francisco
  • Rodríguez Vázquez, Javier
  • Veloso Ferreira, Rafael
  • Tenreiro Villar, Isabel
  • Rivera Calzada, Alberto Carlos
  • Fernando Saavedra, Amalia
  • Sánchez García, Miguel A.
  • Xie, Yong
  • Castellanos Gómez, Andrés
  • Varela Del Arco, María
  • Sánchez Santolino, Gabriel
Automated atomic column detection and identification constitutes an active open front in advanced scanning transmission electron microscopy techniques. In this work we use clustering algorithms in combination with dimensionality reduction techniques to identify specific columns in a series of very different cutting-edge materials, ranging from ultrathin 2D materials to bulk semiconductors or complex oxides, which include different types of columns (heavy and light), and thus pose a challenge towards automated detection. By implementing a three-stage cascaded clustering pipeline, we are able to automatically identify all atomic column sites of our test materials and resolve them from the background interatomic space. This approach could enable new data-driven in-depth analysis of materials, allowing the automatic detection of chemical and structural characteristics of materials.