Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Chemically driven dimensionality modulation of hybrid tin(ii) halide perovskite microcrystals

  • Sánchez-Alarcón, Raul I.
  • Solis, Omar E.
  • Momblona-Rincon, Maria Cristina
  • Ripolles, Teresa S.
  • Martínez-Pastor, Juan P.
  • Abargues, Rafael
  • Boix, Pablo P.|||0000-0001-9518-7549
[EN] The lattice arrangement of lead-free perovskites can be altered by synthesis parameters such as concentration, temperature, choice of solvents, and the length of monovalent cations. This effect, often described as dimensionality modulation, can be exploited to develop new materials with better optical properties than their three-dimensional counterpart. This work explores the versatility of the hot-injection synthesis for obtaining 2-thiopheneethylammonium (TEA(+)) based tin halide perovskite microcrystals. The dimensionality of TEA-based tin bromide perovskite microcrystals can be modulated through changes in the TEA concentration, giving rise to the formation of highly luminescent 0D-TEA(4)SnBr(6) and low-emissive 2D-TEA(2)SnBr(4) microplates. In contrast, 0D-[TEASnCl(3)][TEACl] and 2D-TEA(2)SnI(4) are thermodynamically preferred as main products when using the chloride and iodide analogues, respectively, limiting the dimensional versatility. It is noteworthy that 0D-TEA(4)SnBr(6) shows the highest PLQY from the low dimensional TEA tin halide family (PLQY = 75% in thin-film) owing to a more confined configuration based on isolated [SnBr6](4-) octahedra moieties separated by TEA(+) cations, being attractive for optoelectronic applications., This project has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No. 862656 (project DROP-IT) by the Spanish MICINN through project no. PID2020-120484RB. We acknowledge the support from the Spanish MINECO through the project Nirvana (no. PID2020-119628RB-C31) by MCIN/AEI/10.13039/501100011033. Also, we acknowledge the financial support from Generalitat Valenciana through the CIDEGENT contract (ref: CIDEGENT/2021/044) and CIAPOS 2022/018 grant. The work was partially funded by MCIN/AEI through project TED2021-131600B-C32.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Adjusting the Crystallization of Tin Perovskites through Thiophene Additives for Improved Photovoltaic Stability

  • Solis, Omar E.
  • Mínguez-Avellán, Miriam
  • Betancur, Pablo F.
  • Sánchez-Alarcón, Raul I.
  • Martínez-Pastor, Juan P.
  • Ripolles, Teresa S.
  • Abargues, Rafael
  • Isabelle Rodriguez|||0000-0001-5479-2494
  • Boix, Pablo P.|||0000-0001-9518-7549
[EN] Tin-based perovskites (Sn-PVK) are promising lead-free alternatives for efficient photovoltaic technology, but they face challenges related to bulk and surface defects due to suboptimal crystallization and Sn2+ oxidation. Introducing thiophene-2-ethylammonium halides (TEAX, where X = I, Br, Cl) improves FASnI3 crystallization and reduces Sn4+ formation. This is achieved by adjusting the crystallization dynamics through the formation of a complex between S and Sn during the preparation of the precursor solution, which also inhibits Sn2+ oxidation in the resulting films. In solar cells, these additives boost power conversion efficiency (PCE) from 6.6% (without additives) to 9.4% (using TEABr), with further enhancement to 12% by adjusting selective contacts. The addition of TEAX also increases the Sn2+ content, outperforming control. Devices with TEABr maintained over 95% of their initial PCE after 2000 h in N2 under continuous operation with 1 sun simulated illumination., This work was made possible by the SANTIAGO GRISOLIAprogram of the Valencian Community of Spain under theproject GRISOLIAP/2021/112. We acknowledge the supportof the Spanish MINECO through the project Nirvana (no.PID2020-119628RB-C31) by MCIN/AEI/10.13039/501100011033. Also, we acknowledge the financial supportof Generalitat Valenciana through the CIDEGENT contracts(ref: CIDEGENT/2021/044 and CIDEXG/2022/34), CIA-POS 2022/018 grant. The work was partially funded byMCIN/AEI through project TED2021-131600B-C32 andgrant CNS2023-144270 funded by MCIN/AEI/ 10.13039/501100011033 by European Union NextGenerationEU/PRTR . Financial support by the Spanish Ministry of Scienceand Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Self-Healing Significantly Improves Performances of NiO Sputtered n-i-p Perovskite Solar Cells

  • Basak, Susmita
  • Ghosh, Sudeshna
  • Pariari, Debasmita
  • Jangid, Teena
  • Behera, Tejmani
  • Boix, Pablo P.
  • Mora-Sero, Iván
  • Chowdhury, Arindam
  • Sarma, D.D.
  • Sarkar, Shaibal K.
[EN] Using radio frequency magnetron sputter deposition to apply metal oxide thin film as a hole transporting layer (HTL) onto a halide perovskite layer significantly compromises the device photovoltaic performance. Therefore, despite its economic advantages and scalability potential, this method is generally not favored. Herein, we identify the primary cause of this limitation as the loss of the organic moiety from the near-interface region during the sputter deposition of NiO onto the halide perovskite and the consequent generation of interfacial defects. Furthermore, we show that a self-healing process, without any external intervention, is able to significantly compensate for the adverse effects of the sputtering process, resulting in the device efficiency to 180-220% of its initial value and leading to the highest-ever power conversion efficiency (PCE) reported for an n-i-p device with a sputtered NiO HTL. Employing optical and impedance spectroscopies, we investigate the mechanism of this self-healing process, establishing the dynamics of the process to be thermally controlled and independent of the storage ambient, indicating the diffusion of the ionic species from the bulk to the interface as the driving force for the recovery., S.K.S. and D.D.S. thank the Department of Science and Technology (DST), Govt. of India, for financial support through bilateral research grants. The authors thank the Ministry of New and Renewable Energy (MNRE), Govt. of India, for financial support. S.G. thanks University Grant Commission. T.B., D.P., and S.B. thank the Council of Scientific and Industrial Research (CSIR) for the student fellowship. D.D.S. thanks CSIR for the Bhatnagar Fellowship for supporting a part of this research. P.P.B. and I.M.-S. acknowledge the Advanced Materials programme, supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1, Step-Up collaborative project TED2021-131600B-C31 and TED2021-131600B-C32) and by the Generalitat Valenciana (code MFA/2022/040 and MFA/2022/020, respectively). S.K.S. thanks IITB Institute of Eminence grant for Seeding International Collaborations.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Compositional Engineering of Monocrystalline Metal Halide Perovskite Memristors for Multistate Non-Volatile Operation

  • Fernandez-Guillen, Ismael
  • Minguez-Avellan, Miriam
  • Aranda, Clara A.
  • Abargues, Rafael
  • Ripolles, Teresa S.
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
  • Boix, Pablo P.|||0000-0001-9518-7549
[EN] Metal halide perovskite (MHP) memristors hold great promise for next-generation memory and neuromorphic computing. However, challenges such as stability and endurance hinder both their performance and a deeper understanding of their working mechanisms. Advances in thin monocrystalline MHP memristors have demonstrated improved endurance due to the absence of grain boundaries, which makes them an ideal platform for systematically identifying key factors influencing device performance. Thus, evaluating the compositional effects on monocrystalline MHP memristors within a consistent device architecture serves as a powerful approach to deepen understanding of the system and guide the development of application-oriented devices. This strategy is used to fabricate the first memristor based on a mixed-halide thin perovskite monocrystal, which enables multistate non-volatile memristive operation. Furthermore, precise compositional engineering allows control over defect density, which affects the materials' ionic properties and determines key device performance parameters. This study unlocks multistate properties in non-volatile memristors and provides critical insights into defect density effects, paving the way for high-density storage in neuromorphic computing., This study forms part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by the Generalitat Valenciana (code MFA/2022/040/007). The work was partially funded by MCIN/AEI through project TED2021-131600B-C32. P.P.B. and T.S.R. thank Generalitat Valenciana for the funding via Pla Gent-T (grants CIDEGENT/2021/044 and ESGENT/010/2024). These results are part of the grant CNS2023-144270 funded by MICIU/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR. C.A.A. was supported by the Margarita Salas postdoctoral contract MGS/2021/24(UP2021-021) financed by the European Union-NextGenerationEU.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Photon Recycling-Driven Photodetection Enhancement in Ni(AcO)2-MAPbBr3 Nanocomposite Waveguides

  • Soriano-Diaz, Sandra
  • Noguera-Gomez, Jaume
  • Ramirez-Munoz, Diego
  • Martinez-Pastor, Juan P.
  • Abargues, Rafael
  • Suarez, Isaac
  • Boix, Pablo P.|||0000-0001-9518-7549
[EN] The reabsorption and reemision of photoluminescence (PL) photons, or photon recycled (PR) effect, has demonstrated outstanding benefits in solar cells or light-emitting diodes. Nevertheless, this process has been unexplored in photodetectors (PD) because reliably quantifying the photocurrent driven by PL photons is technically challenging. This work demonstrates the generation of a PR-driven photocurrent by incorporating a nickel acetate, Ni(AcO)2, nanocomposite containing MAPbBr3 (MA = methylammonium) nanocrystals (NCs) in planar waveguide structure integrating electrode contacts. The concentration of NCs in the matrix is optimized to enable efficient PL photon confinement and propagation over millimeter-scale distances until detected. Under modulated laser illumination, this mechanism enhances photocurrent by approximately 60%. Remarkably, under nanosecond pulsed excitation, the device generates an amplified spontaneous emission signal that is reabsorbed within the film, yielding a photocurrent peak of 0.8 mA per pulse. These findings demonstrate an effective strategy for enhancing the performance of MHP-based PDs., This project received funding through projects no. PID2020-120484RB-I00, PID2019-107314RB-I00 (Stable), and PID2023-151632OB-C21 financed by the Spanish MCIN/AEI. This study also formed part of the Advanced Materials and Quantum Communication programs and was supported by MCIN with funding from European Union Next Generation EU (PRTR-C17.I1) within the project COMCUANTICA/009. The authors acknowledge the support of the Spanish MINECO through the project Flexwin (Grants PID2023-151880OB-C31, PID2023-151880OB-C32, PDC2023-145936-I00) and by MCIN/AEI/10.13039/501100011033. Also, they acknowledge the financial support of Generalitat Valenciana through the CIDEGENT contract ref: CIDEXG/2022/34. The work was partially funded by MCIN/AEI through project TED2021-131600B-C32 and forms part of (AEI), the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana, with project reference MFA/2022/040. PPB acknowledges the Grant CNS2023-144270 funded by MICIU/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR. SSD and JNG acknowledges their FPU PhD contract references FPU22/00277 and FPU19/04544, respectively.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Perovskite thin single crystal for a high performance and long endurance memristor

  • Fernandez-Guillen, Ismael
  • Aranda, Clara A.
  • Betancur, Pablo F.
  • Vallés-Pelarda, Marta
  • Momblona, Cristina
  • Ripolles, Teresa S.
  • Abargues, Rafael
  • Boix, Pablo P.
Metal halide perovskites (MHPs) exhibit electronic and ionic characteristics suitable for memristors. However, polycrystalline thin film perovskite memristors often suffer from reliability issues due to grain boundaries, while bulk single-crystal perovskite memristors struggle to achieve high LRS/HRS ratios. In this study, a single crystal memristive device utilizing a wide bandgap perovskite is introduced, MAPbBr3, in a high surface/thickness configuration. This thin single crystal overcomes these challenges, exhibiting a remarkable LRS/HRS ratio of up to 50 and endurance of 103 cycles, representing one of the highest reported values to date. This exceptional stability enables to analyze the electroforming process and LRS through impedance spectroscopy, providing insights into the underlying operational mechanism. As far as it is known, this is the first reported thin single-crystal MHP memristor device and the first time that the electroforming process is recorded through impedance spectroscopy. This device's outstanding stability and performance position it as a promising candidate for high-density data storage and neuromorphic applications., C.A.A was supported by the Margarita Salas postdoctoral contract MGS/2021/24(UP2021-021) financed by the European Union-NextGenerationEU. The authors would like to acknowledge the funding by MCIN/ AEI /10.13039/501100011033 (Research project no. PID2020-119628RB-C31). PPB and TR thank Generalitat Valenciana for the funding via Pla Gent-T (grants CIDEXG/2022/34). C.M. acknowledges the funding from the “Contratación de personal investigador doctor con experiencia internacional CDEIGENT” (ref CDEIGENT/2021/2022) from the Consellería de Innovación, Universidades, Ciencia y Sociedad Digital de la Generalitat Valenciana, Spain.This study forms part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by the Generalitat Valenciana (code MFA/2022/040 /007). The work was partially funded by MCIN/ AEI through project TED2021-131600B-C32., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Perovskite thin single crystal for a high performance and long endurance memristor

  • Fernández-Guillén, Ismael
  • Aranda, Clara A.
  • Betancur, Pablo F.
  • Vallés-Pelarda, Marta
  • Momblona, Cristina
  • Ripollés, Teresa S.
  • Abargues, Rafael
  • Boix, Pablo P.
Metal halide perovskites (MHPs) exhibit electronic and ionic characteristics suitable for memristors. However, polycrystalline thin film perovskite memristors often suffer from reliability issues due to grain boundaries, while bulk single‐crystal perovskite memristors struggle to achieve high LRS/HRS ratios. In this study, a single crystal memristive device utilizing a wide bandgap perovskite is introduced, MAPbBr3, in a high surface/thickness configuration. This thin single crystal overcomes these challenges, exhibiting a remarkable LRS/HRS ratio of up to 50 and endurance of 103 cycles, representing one of the highest reported values to date. This exceptional stability enables to analyze the electroforming process and LRS through impedance spectroscopy, providing insights into the underlying operational mechanism. As far as it is known, this is the first reported thin single‐crystal MHP memristor device and the first time that the electroforming process is recorded through impedance spectroscopy. This device's outstanding stability and performance position it as a promising candidate for high‐density data storage and neuromorphic applications.