Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Highly Transparent BiEDOT-Based Conducting Polymers as Tailorable Hole Transport Materials for Perovskite Solar Cells

  • Farinos-Navajas, Noemi
  • Minguez-Avellan, Miriam
  • Betancur, Pablo F.
  • Akin, Seckin
  • Ans, Muhammad
  • Martinez-Pastor, Juan P.
  • Turren-Cruz, Silver-Hamill
  • Rodriguez-Canto, Pedro J.
  • S. Ripolles, Teresa
  • Abargues, Rafael
  • Boix, Pablo P.|||0000-0001-9518-7549
[EN] The development of new transparent conducting polymers is critical for advancing next-generation optoelectronic technologies. Here, we introduce a new class of highly transparent BiEDOT-based conducting polymers as an alternative to PEDOT:PSS, obtained via in situ oxidative polymerization of the BiEDOT dimer within a polymethylmethacrylate (PMMA) matrix using Cu(ClO4)2. This interpenetrating polymer network (PBiEDOT-PMMA) combines the high conductivity of PBiEDOT with the excellent film-forming ability and chemical robustness of PMMA, yielding uniform, pinhole-free films with tunable conductivity and superior optical transparency across the visible and near-infrared regions. When used as a hole transport material (HTM) in inverted perovskite solar cells, PBiEDOT-PMMA delivers a marked enhancement in open-circuit voltage (Voc) compared to PEDOT:PSS. Ultraviolet photoelectron spectroscopy (UPS) reveals a more favorable energy-level alignment between the perovskite valence band and PBiEDOT-PMMA than with PEDOT:PSS, which directly facilitates more efficient hole extraction and reduces interfacial energy barriers. The enhancement of Voc is the most direct fingerprint of the superior interfacial quality achieved with PBiEDOT-PMMA, underscoring its potential as a robust alternative to PEDOT:PSS for high-efficiency perovskite solar cells. Complementary analyses (PL, TRPL, quasi-Fermi level splitting, ideality factor, and impedance spectroscopy) consistently confirm reduced recombination losses. Beyond photovoltaics, the simplicity, scalability, and cost-effectiveness of this synthetic strategy, together with the ability to formulate processable inks, make PBiEDOT-PMMA a promising candidate for a wide range of optoelectronic applications, including flexible electronics, OLEDs, sensors, and transparent conductive coatings., Funded by the European Union. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Climate, Infrastructure and Environment Executive Agency. Neither the European Union nor the granting authority can be held responsible for them. HEPAFLEX project has received funding from HORIZON Research and Innovation Actions under Grant Agreement no. 101122345. This publication is part of the project PID2023-151880OB-C31 and PID2023-151880OB-C32 funded by MICIU/AEI/10.13039/501100011033. PPB acknowledges the grant CNS2023-144270 funded by MICIU/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR. This work was partially funded by the Generalitat Valenciana through the Pla Gent-T programme, project CIDEGENT/2021/044 and ESGENT 010/2024.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Adjusting the Crystallization of Tin Perovskites through Thiophene Additives for Improved Photovoltaic Stability

  • Solis, Omar E.
  • Mínguez-Avellán, Miriam
  • Betancur, Pablo F.
  • Sánchez-Alarcón, Raul I.
  • Martínez-Pastor, Juan P.
  • Ripolles, Teresa S.
  • Abargues, Rafael
  • Isabelle Rodriguez|||0000-0001-5479-2494
  • Boix, Pablo P.|||0000-0001-9518-7549
[EN] Tin-based perovskites (Sn-PVK) are promising lead-free alternatives for efficient photovoltaic technology, but they face challenges related to bulk and surface defects due to suboptimal crystallization and Sn2+ oxidation. Introducing thiophene-2-ethylammonium halides (TEAX, where X = I, Br, Cl) improves FASnI3 crystallization and reduces Sn4+ formation. This is achieved by adjusting the crystallization dynamics through the formation of a complex between S and Sn during the preparation of the precursor solution, which also inhibits Sn2+ oxidation in the resulting films. In solar cells, these additives boost power conversion efficiency (PCE) from 6.6% (without additives) to 9.4% (using TEABr), with further enhancement to 12% by adjusting selective contacts. The addition of TEAX also increases the Sn2+ content, outperforming control. Devices with TEABr maintained over 95% of their initial PCE after 2000 h in N2 under continuous operation with 1 sun simulated illumination., This work was made possible by the SANTIAGO GRISOLIAprogram of the Valencian Community of Spain under theproject GRISOLIAP/2021/112. We acknowledge the supportof the Spanish MINECO through the project Nirvana (no.PID2020-119628RB-C31) by MCIN/AEI/10.13039/501100011033. Also, we acknowledge the financial supportof Generalitat Valenciana through the CIDEGENT contracts(ref: CIDEGENT/2021/044 and CIDEXG/2022/34), CIA-POS 2022/018 grant. The work was partially funded byMCIN/AEI through project TED2021-131600B-C32 andgrant CNS2023-144270 funded by MCIN/AEI/ 10.13039/501100011033 by European Union NextGenerationEU/PRTR . Financial support by the Spanish Ministry of Scienceand Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Compositional Engineering of Monocrystalline Metal Halide Perovskite Memristors for Multistate Non-Volatile Operation

  • Fernandez-Guillen, Ismael
  • Minguez-Avellan, Miriam
  • Aranda, Clara A.
  • Abargues, Rafael
  • Ripolles, Teresa S.
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
  • Boix, Pablo P.|||0000-0001-9518-7549
[EN] Metal halide perovskite (MHP) memristors hold great promise for next-generation memory and neuromorphic computing. However, challenges such as stability and endurance hinder both their performance and a deeper understanding of their working mechanisms. Advances in thin monocrystalline MHP memristors have demonstrated improved endurance due to the absence of grain boundaries, which makes them an ideal platform for systematically identifying key factors influencing device performance. Thus, evaluating the compositional effects on monocrystalline MHP memristors within a consistent device architecture serves as a powerful approach to deepen understanding of the system and guide the development of application-oriented devices. This strategy is used to fabricate the first memristor based on a mixed-halide thin perovskite monocrystal, which enables multistate non-volatile memristive operation. Furthermore, precise compositional engineering allows control over defect density, which affects the materials' ionic properties and determines key device performance parameters. This study unlocks multistate properties in non-volatile memristors and provides critical insights into defect density effects, paving the way for high-density storage in neuromorphic computing., This study forms part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by the Generalitat Valenciana (code MFA/2022/040/007). The work was partially funded by MCIN/AEI through project TED2021-131600B-C32. P.P.B. and T.S.R. thank Generalitat Valenciana for the funding via Pla Gent-T (grants CIDEGENT/2021/044 and ESGENT/010/2024). These results are part of the grant CNS2023-144270 funded by MICIU/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR. C.A.A. was supported by the Margarita Salas postdoctoral contract MGS/2021/24(UP2021-021) financed by the European Union-NextGenerationEU.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Recombination Resistance Identification through Current-Voltage Curve Reconstruction in Perovskite Solar Cells

  • Betancur, Pablo F.
  • Solis, Omar E.
  • Abargues, Rafael
  • Ripolles, Teresa S.
  • Boix, Pablo P.|||0000-0001-9518-7549
[EN] Perovskite solar cells (PSCs) have demonstrated remarkable advancements in efficiency and stability, yet fully understanding the dynamic processes governing their performance remains a challenge. Impedance spectroscopy (IS) offers a powerful means to characterize PSCs over a wide range of time scales, revealing insights into the internal electronic and ionic processes. However, critical factors like recombination, charge extraction, and transport resistance are often coupled in the same spectra response, affecting their accurate identification. This study explores the use of the j¿V curve reconstruction as a tool to identify when recombination governs the impedance response. Our findings show that recombination resistance can be accurately identified, regardless of the underlying recombination mechanism, in the solar cells with unhindered charge extraction. Conversely, in devices with hindered charge extraction, the IS fitting struggles to decouple the transport, extraction and recombination processes, resulting in inaccurate j¿V reconstructions. These findings emphasize the importance of accurately identifying the physical processes influencing IS spectra to improve diagnostics and device performance in PSC technologies., P. F. B. acknowledges his grant CIACIF/2022/183 funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by ESF Investing in your future . O. E. S. acknowledges her predoctoral contract with reference GRISOLIAP/2021/112. T. S. R. and P. P. B. acknowledge the financial support of Generalitat Valenciana through the CIDEGENT contracts (CIDEGENT/ 2021/044 and CIDEXG/2022/34). This study forms part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTRC17.I1) and by the Generalitat Valenciana (code MFA/2022/040). This publication is part of the grant CNS2023-144270 funded by MICIU/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Photon Recycling-Driven Photodetection Enhancement in Ni(AcO)2-MAPbBr3 Nanocomposite Waveguides

  • Soriano-Diaz, Sandra
  • Noguera-Gomez, Jaume
  • Ramirez-Munoz, Diego
  • Martinez-Pastor, Juan P.
  • Abargues, Rafael
  • Suarez, Isaac
  • Boix, Pablo P.|||0000-0001-9518-7549
[EN] The reabsorption and reemision of photoluminescence (PL) photons, or photon recycled (PR) effect, has demonstrated outstanding benefits in solar cells or light-emitting diodes. Nevertheless, this process has been unexplored in photodetectors (PD) because reliably quantifying the photocurrent driven by PL photons is technically challenging. This work demonstrates the generation of a PR-driven photocurrent by incorporating a nickel acetate, Ni(AcO)2, nanocomposite containing MAPbBr3 (MA = methylammonium) nanocrystals (NCs) in planar waveguide structure integrating electrode contacts. The concentration of NCs in the matrix is optimized to enable efficient PL photon confinement and propagation over millimeter-scale distances until detected. Under modulated laser illumination, this mechanism enhances photocurrent by approximately 60%. Remarkably, under nanosecond pulsed excitation, the device generates an amplified spontaneous emission signal that is reabsorbed within the film, yielding a photocurrent peak of 0.8 mA per pulse. These findings demonstrate an effective strategy for enhancing the performance of MHP-based PDs., This project received funding through projects no. PID2020-120484RB-I00, PID2019-107314RB-I00 (Stable), and PID2023-151632OB-C21 financed by the Spanish MCIN/AEI. This study also formed part of the Advanced Materials and Quantum Communication programs and was supported by MCIN with funding from European Union Next Generation EU (PRTR-C17.I1) within the project COMCUANTICA/009. The authors acknowledge the support of the Spanish MINECO through the project Flexwin (Grants PID2023-151880OB-C31, PID2023-151880OB-C32, PDC2023-145936-I00) and by MCIN/AEI/10.13039/501100011033. Also, they acknowledge the financial support of Generalitat Valenciana through the CIDEGENT contract ref: CIDEXG/2022/34. The work was partially funded by MCIN/AEI through project TED2021-131600B-C32 and forms part of (AEI), the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana, with project reference MFA/2022/040. PPB acknowledges the Grant CNS2023-144270 funded by MICIU/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR. SSD and JNG acknowledges their FPU PhD contract references FPU22/00277 and FPU19/04544, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Transforming Device Efficiency and Stability in NiO-Sputtered n-i-p Perovskite Solar Cells by Soft-Landing and a Thin Spiro-OMeTAD Buffer Layer

  • Basak, Susmita
  • Sharma, Rajat
  • Pariari, Debasmita
  • Sarda, Nisha
  • Ghosh, Sudeshna
  • Ghosh, Subhashis
  • Vidhan, Arya
  • Baghel, Niranjan Singh
  • Senanayak, Satyaprasad P.
  • Mora-Sero, Ivan
  • Sarma, D. D.
  • Sarkar, Shaibal K.
  • Boix, Pablo P.|||0000-0001-9518-7549
[EN] The integration of inorganic materials in perovskite solar cells (PSCs) is critical for enhancing long-term operational stability, scalability, and economic viability. Here, we demonstrate the transformational efficacy of using a modified protocol for sputtered nickel oxide as a hole transport layer (HTL) in n-i-p structured PSCs, in conjunction with a thin Spiro-OMeTAD buffer layer. The introduction of a biased grid and a buffer interface enable us to achieve a soft landing of NiO on the halide perovskite, thereby minimizing process-induced interfacial damage. Our results indicate that the buffer layer serves solely as an interfacial protection layer, rather than as a functional HTL. Using this approach, we report champion power conversion efficiencies of 23.45% (mean approximate to 22.2%) on rigid glass substrates and 22.1% (mean approximate to 21%) on flexible ITO-coated PET substrates, both employing fully inorganic charge transport layers. These results represent unprecedented enhancements over previously reported highest PCE values (<12%) for n-i-p devices using sputtered NiO as the HTL, placing them on par with p-i-n architectures that utilize a combination of NiO and organic HTLs. This work demonstrates a scalable, commercially viable pathway toward high-efficiency, stable perovskite photovoltaics based solely on sputtered inorganic layers, offering a competitive edge for further development., The authors thank the Ministry of New and Renewable Energy (MNRE), Govt. of India, for financial support. S.K.S. and D.D.S. thank the Department of Science and Technology (DST), Govt. of India, for financial support through bilateral research grants. S.K.S., I.M-S, and P.P.B. thank the IITB Institute of Eminence grant for Seeding International Collaborations. D.P. and S.B. thank the Council of Scientific and Industrial Research (CSIR) for the student fellowship. D.D.S. thanks CSIR for the Bhatnagar Fellowship, Science and Engineering Research Board, and the Department of Science and Technology, all under the Ministry of Science and Technology, Government of India, for supporting a part of this research. SPS acknowledges funding support from DAE, Government of India through projects RIN-4001 and RNI-4011. SG acknowledges NISER for fellowship. P.P.B and I.M-S. thanks funding from the European Union. Views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or the European Climate, Infrastructure and Environment Executive Agency. Neither the European Union nor the granting authority can be held responsible for them. The HEPAFLEX project has received funding from HORIZON Research and Innovation Actions under Grant Agreement no. 101122345. These results are part of the grant CNS2023-144270 funded by MICIU/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR.