Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Boosting TiO2 photocatalytic hydrogen production via silica-core engineering, optimized shell architecture, and Pd nanoparticles decoration

  • Diego-López, Ander|||0000-0001-5947-9579
  • Tamarit-Mayo, Lorena
  • Marín García, Mª Luisa|||0000-0002-9789-8894
  • Bosca Mayans, Francisco
[EN] Photocatalytic wastewater photoreforming is recognized as a sustainable method for hydrogen generation. In this study, a SiO2@TiO2¿Pd photocatalyst was rationally designed to achieve a balance among high photocatalytic efficiency, ease of recovery, and recyclability. This work also addresses unexplored factors, including the role of the SiO2 core in H2 evolution and the influence of the TiO2 shell thickness on photocatalytic performance. To this end, several core@shell SiO2@TiO2 photocatalysts with controlled TiO2 shell thicknesses were synthesized. The experiments on H2 evolution from glycerol photoreforming revealed that the hydrogen evolution rate is strongly influenced by both the TiO2 shell thickness and the SiO2 core, with the optimum TiO2 shell thickness (ca. 28 nm) photocatalyst showing a hydrogen generation rate 7 times higher than that of P25 (based on hydrogen evolution reaction, HER, rates normalized to the photoactive component of the materials). Decoration of the surface of the optimized SiO2@TiO2 photocatalyst with Pd nanoparticles further increased the hydrogen production rate per photoactive gram by 54-fold (31.9 mmol·h¿1·g¿1). To understand the mechanisms underlying the improved photocatalytic performance, photophysical and (photo)electrochemical characterizations were performed using laser flash photolysis, photoluminescence spectroscopy, and photocurrent measurements. Overall, this study demonstrates that a SiO2 core not only facilitates easier photocatalyst recovery but also positively influences its H2 production performance, resulting in a material 371 times more active than P25. These findings pave the way for the development of SiO2-supported photocatalysts for simultaneous treatment of wastewater and hydrogen production in continuous-flow systems., The authors would like to acknowledge the Spanish Ministry of Science, Innovation and Universities (TED2021-131952B-I00 and PID2023-151872OB-I00, financed by MCIN/AEI/10.130 39/501100011033 and by European Union NextGenerationEU/PRTR) . Financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.130 39/501100011033) is gratefully acknowledged. This research was supported by Generalitat Valenciana through CLEAN-LAGOON project (PROMETEO/CIPROM-2024-49) . A. Diego-Lopez is indebted to the Universitat Politecnica de Valencia for the corresponding Predoctoral FPI fellowship (FPI-UPV/Subprograma 1, PAID-01-22) . L. Tamarit is grateful to the Universitat Politecnica de Valencia for the corresponding co-financed postdoctoral grant (PAID-10-24) . The authors would like to acknowledge the Servei de Microscopia Electronica from the Universitat Politecnica de Valencia (UPV) for the support in the materials characterization and sample preparation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A highly efficient supported TiO2 photocatalyst for wastewater remediation in continuous flow

  • Cabezuelo, Oscar
  • Ponce-Gonzalez, Luis Nicolas
  • Marín García, Mª Luisa|||0000-0002-9789-8894
  • Bosca Mayans, Francisco
[EN] Although TiO2 materials have been extensively studied as photocatalysts, there is not any commercial TiO2- supported photocatalyst used for wastewater remediation. This fact set the goal to synthesize a new supported titanium dioxide photocatalyst which, besides being robust, also has a high reaction surface and a very efficient TiO2 shell thickness. Hence, we present a novel TiO2-supported photocatalyst composed of titania-covered glass wool (GW) fibers decorated with SiO2@TiO2 core-shell spheres. For optimizing the photocatalytic activity of this material, the surface of SiO2 microspheres, as well as, the highly mechanically resistant GW fibers, were covered by a robust titania layer of ca. 20-30 nm of thickness. This layer contains nanometric crystals, ca. 12 nm in size, linked to each other and to the surfaces of both SiO2 microspheres and GW. An exhaustive characterization of the physicochemical properties of this new SiO2-TiO2 composite was performed to confirm the Si-O-Ti linkage and the anatase crystal phase. The photocatalytic activity was initially evaluated in batch through the photo-degradation of Methylene Blue as a standard dye. Afterward, the addition of the new photocatalyst in a solid phase stationary (SPS) photoreactor coupled to a TOC detector allowed studying in situ the mineralization of the recalcitrant pollutant phenol under a continuous flow regime. Results revealed that the optimized TiO2 surface of the SiO2-TiO2 composite produced the complete mineralization of phenol in less than three minutes. Even more, it was demonstrated that this photocatalyst is suitable for the industrial scale-up of wastewater treatment because it does not leach titania, its reuse does not require filtration procedures, and it can be easily implemented in SPS photoreactors at plant scale. In this context, the new material could be a good starting point to prepare other supported photocatalysts for wastewater remediation., Ph.D. Scholarship from Universitat Politecnica de Valencia for the Predoctoral FPI fellowship (FPI-UPV/Subprograma 1) for O.C., the Spanish Ministry of Science and Innovation (PID2019-110441RB-C33 financed by MCIN/AEI/10.13039/501100011033, PDC2022-133426-I00 and TED2021-131952B-I00 financed by MCIN/AEI/10.13039/501100011033 and European Union Next Generation/PRTR) and Spanish National Research Council (open access charge) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimizing the use of light in supported TiO2 photocatalysts: Relevance of the shell thickness

  • Cabezuelo-Gandia, Oscar
  • Diego-López, Ander|||0000-0001-5947-9579
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
  • Marín García, Mª Luisa|||0000-0002-9789-8894
  • Bosca Mayans, Francisco
[EN] Heterogeneous photocatalysts have attracted significant interest over the last few years. In this sense, improved photocatalytic properties for SiO2@TiO2 materials have been correlated with higher semiconductor's specific surface area and adsorption capability. However, the reported TiO2 shell optimizations did not consider the percentage of the photo-excited electron-hole (e¿-h+) pairs occurring in the inaccessible surface of the TiO2 shell. The present study aimed to find the best TiO2 shell thickness for the optimal harvest of light. For this purpose, the sol¿gel method was modified by applying a precise humid airflow to get a uniform deposition of titania on the surface of the SiO2 particles. As a result, photocatalysts with a robust and homogeneous TiO2 shell of different thicknesses (from 14 to 42 nm) with well-defined particle size for TiO2 crystals (ca. 12 nm) were obtained. The SiO2@TiO2 materials were extensively characterized. Finally, their photocatalytic activity was evaluated against methylene blue under irradiation by UVA light. Analysis of the results revealed that the most efficient photocatalyst has a TiO2 shell thickness of ca. 30 nm. Emission and photocurrent studies also agreed with the photocatalytic results suggesting a reduced e¿-h+ recombination rate. Thereby, for the first time, the relevance of shell thickness in supported photocatalysts has been demonstrated., The authors would like to acknowledge the Spanish Ministry of Science, Innovation, and Universities (PID2019-110441RB-C33 financed by MCIN/AEI/10.13039/501100011033 and TED2021-131952B-I00 financed by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR). O. Cabezuelo and A. Diego-Lopez are indebted to the Universitat Politecnica de Valencia for the corresponding Predoctoral FPI fellowship (FPI-UPV/Subprograma 1). The authors would like to acknowledge the Servei de Microscopia Electronica from the Universitat Politecnica de Valencia (UPV) for the support on the composite characterization and sample preparation.Funding for the open access charge provided by CRUE-Universitat Politecnica de Valencia is acknowledged.r Funding for the open access charge provided by CRUE-Universitat Politècnica de València is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Activation of H2O2, PMS, and PDS over anatase TiO2-supported photocatalysts for efficient pollutant mineralization in water

  • Diego-López, Ander|||0000-0001-5947-9579
  • Tamarit-Mayo, Lorena
  • Bosca Mayans, Francisco
  • Marín García, Mª Luisa|||0000-0002-9789-8894
  • Cabezuelo, Oscar
[EN] Mineralization efficiency is a key performance descriptor for heterogeneous photocatalysts in the removal of organic pollutants from water. Although the use of radical promoters can enhance the mineralization process, their effectiveness is highly dependent on the nature of the reactive species generated and, in some cases, may even lead to reduced mineralization efficiency. In this work, a supported anatase-TiO2 photocatalyst was used to investigate the mineralization of ortho-phenylphenol (OPP) under UVA irradiation in the presence of three radical promoters: H2O2, peroxymonosulfate (PMS), and peroxydisulfate (PDS). For this purpose, a core@shell SiO2@TiO2 photocatalyst was synthesized and thoroughly characterized to relate its structural and surface properties to its ability to activate these radical promoters. Notably, photocatalytic experiments showed that OPP photodegradation and total organic carbon (TOC) removal were not directly correlated, indicating that fast pollutant degradation does not necessarily imply efficient mineralization. Accordingly, only PMS significantly improved OPP mineralization efficiency of bare SiO2@TiO2, achieving a conversion of ~95¿% within 2¿h. Electron paramagnetic resonance (EPR) experiments revealed the main radicals generated in each system, providing mechanistic insights that were further corroborated by the differing reactivity of the visible-light-responsive ligand-to-metal charge-transfer (LMCT) complexes formed on the SiO2@TiO2 photocatalyst surface. This study provides valuable guidelines for future research on the characterization and design of photocatalytic systems that utilize radical promoters., The authors would like to acknowledge the Spanish Ministry of Science, Innovation, and Universities (PID2023-151872OB-I00, PID2019 110441RB-C33 and TED2021 131952B-I00, funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR). This research was supported by the CLEAN- LAGOON project (PROMETEO/CIPROM622 2024 49). Financial support by the Spanish Ministry of Science and Innovation (CEX2021 001230-S grant funded by MCIN/AEI/10.13039/ 501100011033) is gratefully acknowledged. A. Diego-Lopez and O. Cabezuelo are indebted to the Universitat Politecnica de Valencia for the corresponding Predoctoral FPI fellowship (FPI-UPV/Subprograma 1). L. Tamarit acknowledges Universitat Politecnica de Valencia for her postdoctoral contract (PAID-10-24). The authors would like to acknowledge the Servei de Microscopia Electronica from the Universitat Politecnica de Valencia (UPV) for their support in materials characterization and sample preparation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Uncovering the mesoporous secrets of Ti/Al2O3 3-D gels: Fine-tuning morphology engineering for enhancing catalytic ozonation efficacy of environmental contaminants

  • Ostovar, Somayeh
  • Moussavi, Gholamreza
  • Mohammadi, Samira
  • Giannakis, Stefanos
  • Marín García, Mª Luisa|||0000-0002-9789-8894
  • Bosca Mayans, Francisco
  • Diego-López, Ander|||0000-0001-5947-9579
[EN] Herein, we optimized the catalytic ozonation process (COP) by engineering the morphology of versatile mesoporous Ti-doped gamma Al2O3 materials. Ti/gamma Al2O3 catalysts were synthesized as xerogels, ambigels, and aerogels for pchlorobenzoic acid (pCBA) degradation by catalytic ozonation. The roles of Lewis acids and basic sites in Ti/ gamma Al2O3 were investigated along with the synthesis parameters affecting the morphology, structure, and surface acidity. The incorporation of Ti4+ increased the surface acidity, resulting in an effective COP. Full characterization confirmed the uniform Ti distribution and well-defined acidic properties. The sole ozonation process was insufficient, while 0.5 g/L catalyst addition rapidly degraded 50 mg/L pCBA (xerogel: 30 min, ambigel/aerogel: 60 min) while showing excellent reusability and robustness under ions' presence. EPR analysis suggested that pCBA removal occurs via bulk HO center dot and less by O3 and O2 center dot --mediated reactions, without 1O2 generation. Based on the above findings, we proposed an integrated pCBA degradation pathway, providing insights into enhancing the COP for organic pollutant degradation via novel, cheap, and sustainable mesoporous materials., The authors are grateful to the Ministry of Health and Medical Education, Iran, for providing financial support under the Elite Grant No. EG-402002. The authors also thank Tarbiat Modares University, Iran, for providing technical and financial support. The authors would also like to acknowledge the Spanish Ministry of Science, Innovation, and Universities (PID2019-110441RB-C33 financed by MCIN/AEI/10.13039/501100011033 and TED2021-131952B-I00 financed by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR). A. Diego-Lopez is indebted to the Universitat Politecnica de Valencia for the Predoctoral FPI fellowship (FPI-UPV/Subprograma 1).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Highly effective CNT-based magnetic pn-junction nanocomposite photocatalyst/solar-energy material for hazmat conversion to hydrogen fuel

  • Ghanimati, Majid
  • Lashgari, Mohsen
  • Diego-López, Ander|||0000-0001-5947-9579
  • Bosca Mayans, Francisco
  • Marín García, Mª Luisa|||0000-0002-9789-8894
[EN] Hazmat conversion to hydrogen using low-cost effective eco-friendly solar energy active materials is a sustainable strategy for environmental remediation and provision of future green fuel. In this paper, a novel magnetic pn-junction nanocomposite was rationally designed and synthesized through a facile hydrothermal route using affordable chemicals in the absence and presence of CNT (carbon nanotube). The easy recyclable/re-collectable CNT-based magnetic materials with the scaling up capability synthesized here were applied as effective nanoenergy materials for photocatalytic conversion of H2S feed to hydrogen fuel. The maximum hydrogen production was attained for the pn-junction nanocomposite photocatalyst at the molar ratio 1:2 of p to n (rate: 5652 umolH2/g/h) and boosted 60% by adding CNT. Transient photocurrent, impedance, fluorescence and electron paramagnetic resonance (EPR) investigations revealed that the charge recombination is reduced in the presence of CNT and hence the photogenerated pairs can more effectively be utilized in the hazmat-to-fuel conversion process. The junction formation was approved at an atomistic scale through HRTEM observation. Furthermore, the magnetic property of the synthesized nanocomposite photocatalyst was improved in the presence of CNT and discussed in detail from physicochemical standpoint using VSM (vibrating sample magnetometric) and XPS (X-ray photoelectron spectroscopic) evidence., The authors wish to express their gratitude to the editor and reviewers of the manuscript, and to the Research council of IASBS for the financial support of this project. F. Bosca and M. Luisa Marin would like to acknowledge the Spanish Ministry of Science, Innovation, and Universities (PID2019-110441RB-C33 financed by MCIN/AEI/10.13039/501100011033 and TED2021-131952B-I00 financed by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR) . A. Diego -Lopez is grateful to the Universitat Politecnica de Valencia for the Predoctoral FPI fellowship (FPI-UPV/Subprograma 1).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mechanistic insights into E. coli inactivation by MnOx-anode electrochlorination: coupled Fenton-like, active-chlorine and 1O2-pathways

  • Espinosa-Barrera, Paula Andrea
  • Calvo-Arroyo, Sara
  • Martínez-Pachón, Diana
  • Moncayo-Lasso, Alejandro
  • Giannakis, Stefanos
  • Diego-López, Ander|||0000-0001-5947-9579
  • Marín García, Mª Luisa|||0000-0002-9789-8894
  • Bosca Mayans, Francisco
[EN] Our study explored E. coli inactivation by electrochemical chlorination using MnOx anodes, and the results support a multi-oxidant mechanism involving active chlorine species (ACS), cathodically generated H2O2, downstream 1O2 formation, and Fenton-like oxidative stress. E. coli inactivation was elucidated using assays with scavengers (catalase, tBuOH, bicarbonate), kinetic isotope experiments, and gene knockout mutants (catalases, superoxide dismutases, Mn2+ transport, and DNA repair). The experiments were conducted at a current density of 11.67 mA/cm2 and an electrolyte concentration of 0.05 mol/L NaCl, measuring complete inactivation of 108 CFU/mL within 90 min using a MnO anode (MnOx-A). The delay period prior to cell death was consistent with the intracellular generation of HO¿ and Cl¿ through Fenton-like reactions with electrochemically produced HOCl/OCl¿ and H2O2, supporting 1O2 generation and O2¿¿ participation in the disinfection process. Subsequently, cell death was triggered by combined intra- and extracellular oxidation, comprising damage to the cell membrane, cytoplasmic components, and DNA. Interestingly, as validated by XPS, when preparing the MnO2 anode (MnOx-B), the inactivation time decreased to 20 min, attributed to the further 1.69-to-1.81-fold increase in ACS generation (Current efficiency = 21.4%). Discerning the differences between MnOx anodes impulses innovation in electrochemical disinfection technologies, creating opportunities for metal-oxide-facilitated bacterial control., Paula Andrea Espinosa-Barrera thanks the Asociación Universitaria Iberoamericana de Postgrado (AUIP) for the scholarship within the Programa de Becas de Movilidad Académica entre Instituciones Asociadas a la AUIP 2023 (Second Term). A. Diego-Lopez is indebted to the Universitat Politècnica de València for the corresponding Predoctoral FPI fellowship (FPI-UPV/Subprograma 1). ML Marin and F. Bosca acknowledge the Spanish Ministry of Science, Innovation, and Universities (TED2021-131952B-I00 financed by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR and CEX2021-001230-S grants funded by MCIN/AEI/10.13039/501100011033). The authors would like to acknowledge Servei de Microscopia Electrònica from the Universitat Politècnica de València (UPV) for their support in the material characterization and sample preparation. Stefanos Giannakis acknowledges the REDDIS project, Procesos reductivos como el Talón de Aquiles bacteriano en la desinfección de aguas residuales y en aguas naturales , which received funding from the Agencia Estatal de Investigación (Spain), Proyectos Consolidación Investigadora 2022 (CNS2022-135728).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Scalable continuous-flow photocatalytic system based on a TiO2-coated sand composite for microplastic mineralization

  • Company-Doménech, Carlos|||0009-0005-7484-3996
  • Blázquez-Moraleja, Alberto|||0000-0003-1375-930X
  • Bosca Mayans, Francisco
  • Marín García, Mª Luisa|||0000-0002-9789-8894
[EN] Microplastics (MPs) represent a persistent environmental threat, with polyethylene terephthalate MPs (PET) from textiles and domestic washing posing particular challenges due to their widespread use in bottles, cleaning products, and clothing fibers. While most reported photocatalysis strategies for PET degradation rely on TiO 2 suspensions, often requiring pH adjustment or chemical additives, we present here the first continuous-flow system to achieve effective mineralization of PET directly in untreated domestic washing wastewater generated without detergent addition. Accordingly, an optimized TiO 2 and SiO UVA LED 2 -SiO layer was immobilized onto commercial sand microspheres, and the resulting materials were integrated to yield a structurally robust photocatalytic system (sand@TiO 2 2 @TiO 2 ) that synergistically combines the intrinsic mechanical filtration capacity of sand with the enhanced specific surface area provided by the TiO 2-functionalized SiO 2 microspheres. This material was thoroughly characterized using FESEM, Raman, XRD, UV¿Vis diffuse reflectance, and XPS. Its implementation in a lab-scale tubular photoreactor equipped with LED lamps (¿ max 1 =362 nm) demonstrated complete removal of PET microplastics from wastewater generated from domestic textile washing with tap water at a flow rate of 0.05 L h , as confirmed by COD, TOC, gravimetry, turbidimetry, FTIR, and microscopy. Mechanistic elucidation of PET photodegradation was achieved using EPR and LC-MS. The results of this study indicate that the sand@TiO 2-SiO 2 @TiO 2 photocatalyst is effective for the mineralization of microplastics in continuous-flow systems. This scalable strategy advances microplastic remediation by linking traditional laboratory-scale suspension photocatalysis research with real-world wastewater treatment applications. Moreover, this approach paves the way for the design of new advanced materials to improve microplastic removal., This research was supported by the Spanish Ministry of Science and Innovation through grants TED2021-131952B-I00, PDC2022-133426- I00, and CEX2021-001230-S, funded by MCIN/AEI/10.130 39/501100011033. Additional financial support was provided by the Generalitat Valenciana through the CLEAN-LAGOON project (PROMETEO/CIPROM-2024-49), the Agencia Valenciana de la Innovacion (AVI, grant 20220826/UCIE-ITQ), and the Ayuda a Primeros Proyectos de Investigacion ¿ (PAID-06-24) from the Universitat Polit`ecnica de Valencia. The authors also acknowledge the Generalitat Valenciana and the European Union for co-funding the postdoctoral contract of A.B.M. (CIAPOS/2023/201) through the European Social Fund Plus (ESF+) Operational Program 2021 2027. C.C⋅D acknowledges the Universitat Politecnica de Valencia for the Predoctoral FPI fellowship (FPI-UPV/ Subprograma 2) and the Spanish Catalysis Society for the master's thesis scholarship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mineralization of pollutants in water at neutral pH through a heterogeneous photo-Fenton-like process generated by SiO2@TiO2@Fe3O4 in the presence of PMS

  • Cabezuelo-Gandia, Oscar
  • Diego-López, Ander|||0000-0001-5947-9579
  • Marín García, Mª Luisa|||0000-0002-9789-8894
  • Bosca Mayans, Francisco
[EN] The photo-Fenton process has been proposed as a suitable strategy for efficiently oxidizing organic contaminants in water. However, its applicability is limited by pH and homogeneous medium requirements. In this sense, the present study aimed to surpass those limitations through a novel heterogenous SiO2@TiO2@Fe3O4 photocatalyst, which combines a core-support of SiO2 with an internal semiconductor shell of TiO2 and an external shell of magnetic Fe3O4 nanocrystals. Photocatalytic ortho-phenylphenol (OPP) degradation using this photocatalyst in the presence of H2O2 or PMS at a neutral pH showed a much faster OPP mineralization in the presence of PMS than when H2O2 was used as the oxidant. To understand this finding, EPR assays were performed, and their results revealed that a photo-Fenton-like oxidation process occurs when SiO2@TiO2@Fe3O4 photocatalyst is irradiated in the presence of PMS at neutral pH aqueous media. Thus ·OH and SO4·- radicals are generated during this process. However, the main reactive intermediate detected changing PMS by H2O2 was ·OOH radical. Hence, the high oxidation capability of ·OH and SO4·- radicals justify the fast OPP mineralization observed in the presence of PMS. Furthermore, an extensive evaluation of the new magnetic photocatalyst confirmed its robustness, showing consistent performance over multiple cycles without detecting significant iron leaching. Lastly, it is worth highlighting that the magnetic properties of Fe3O4 of this new photocatalyst, coupled with the core@shell technology, offer a technical improvement in efficiently separating inorganic photocatalysts from the reaction medium by applying an appropriate magnetic field., Predoctoral FPI fellowships (FPI-UPV/Subprograma 1) for O.C. and A.D., the Spanish Ministry of Science and Innovation (PDC2022 133426-I00 and TED2021 131952B-I00 financed by MCIN/AEI/10.13039/501100011033 and European Union Next Generation/PRTR), and CRUE-Universitat Politecnica de Valencia (open access charge) are gratefully acknowledged. Financial support by the Spanish Ministry of Science and Innovation (CEX2021 001230-S grant funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Rapid degradation of Omeprazole and highly effective inactivation of E. coli in the UVA-light photocatalytic process with Cu-doped in spinel-structured Al2O3 as a stable catalyst

  • Ostovar, Somayeh
  • Moussavi, Gholamreza
  • Mohammadi, Samira
  • Giannakis, Stefanos
  • Marín García, Mª Luisa|||0000-0002-9789-8894
  • Bosca Mayans, Francisco
  • Diego-López, Ander|||0000-0001-5947-9579
[EN] Herein, a spinel alumina structure photocatalyst was prepared by a one-pot modified sol¿gel technique with rational design and unique electronic structure evolution by Cu doping in the ¿Al2O3 lattice. Based on the obtained results of a full material characterization (incl. NH3-TPD, 27Al solid-state NMR, XPS, HAADF-STEM), the Cu-¿Al2O3 xerogel nanomaterial displayed high dispersion of copper, significant quantities of high-density acid sites, an increase of the oxygen vacancies (OVs) on its surface, and high light absorption efficiency. This mesoporous Cu-¿Al2O xerogel displayed brilliant photocatalytic performance under UVA-LED, owing to its suitable band gap, degrading around 92 % of 20 mg/L Omeprazole (OMP) in 30 min (pH = 7, catalyst = 50 mg/L). The effect of operating parameters was investigated, such as pH, concentration of Cu-¿Al2O3/OMP, water matrix, and stability; the synthesized nanomaterial has shown outstanding stability and recyclability for four runs. The reaction mechanism was proposed using scavenging experiments, and EPR spectroscopy, Cu-doping-induced oxygen vacancies to promote charge separation and molecular oxygen activation, generating mainly ·OH. The OMP degradation pathway was proposed (LC-MS), while the produced Cu-¿Al2O3 nanomaterial effectively catalyzed the inactivation of >99.99 % E. coli., This work is based upon research funded by Iran National Science Foundation (INSF) under project No. 4024503. This work was technically and financially supported by the Tarbiat Modares University, Iran, under the Research Group grant No. IG-39801. The authors would also like to acknowledge the Spanish Ministry of Science, Innovation, and Universities (PID2019-110441RB-C33 financed by MCIN/AEI/10.13039/501100011033 and TED2021-131952B-I00 financed by MCIN/AEI/10.13039/501100011033 and by European Union Next-GenerationEU/PRTR). A. Diego-Lopez is indebted to the Universitat Politecnica de Valencia for the Predoctoral FPI fellowship (FPI-UPV/Subprograma 1).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Why is HSO5 so effective against bacteria? Insights into the mechanisms of Escherichia coli disinfection by unactivated peroxymonosulfate

  • Tian, Na
  • Abeledo-Lameiro, María Jesús
  • Polo-López, Inmaculada
  • Gonzalez, Isabel
  • Hernandez Lehmann, Aurelio
  • Giannakis, Stefanos
  • Schmidt, Luciana Carina|||0000-0001-7059-3938
  • Marín García, Mª Luisa|||0000-0002-9789-8894
  • Bosca Mayans, Francisco
[EN] This study examined the antimicrobial efficacy of peroxymonosulfate (PMS) against bacteria, using Escherichia coli (E. coli) as a model organism. Our investigation delineates the complex mechanisms exerted by unactivated PMS. Thus, an initial redox reaction between PMS and the target biomolecules of bacteria generates SO4 center dot- as the pivotal reactive species for bacterial inactivation; to a lesser extent, center dot OH, O-1(2), or O-2(center dot-) may also participate. Damage generated during oxidation was identified using an array of biochemical techniques. Specifically, redox processes are promoted by PMS and SO4 center dot- targets and disrupt various components of bacterial cells, predominantly causing extracellular damage as well as intracellular lesions. Among these, external events are the key to cell death. Finally, by employing gene knockout mutants, we uncovered the role of specific gene responses in the intracellular damage induced by radical pathways. The findings of this study not only expand the understanding of PMS-mediated bacterial inactivation but also explain the ten-fold higher effectiveness of PMS than that reported for H2O2. Hence, we provide clear evidence that unactivated PMS solutions generate SO4 center dot- in the presence of bacteria, and consequently, should be considered an effective disinfection method., This work was supported by the National Natural Science Foundation of China (Grant No. 42107102), the China Postdoctoral Science Foundation (No. 2020M672442), and the China Scholarship Council (CSC No. 202006415045). Stefanos Giannakis wish to thank the MCIN/AEI/10.13039/501100011033 and the European Union Next Generation- EU/PRTR for funding the DIGIT4WATER project " Towards the Improvement of the Urban Water Cycle Resilience Through the Implementation of Digital Tools Based on Machine Learning Models and Water Reclamation Technologies " (Reference: TED2021-129969A-C-32, and the DETRAS Project, " Desinfeccion-Descontaminacion de Efluentes Contra la Transmision de laResistencia en Antibioticos " (Reference: APOYO-JOVENES-21-UXUKHL-88-WQWWQF), funded by the Comunidad de Madrid through the call " Research Grants for Young Investigators from Universidad Politecnica de Madrid " Maria Luisa Marin and Francisco Bosca gratefully acknowledge the Universitat Politecnica de Valencia, Ministerio de Universidades, and recovery plan Next Generation/EU for the financial support in the postdoctoral contract Maria Zambrano of Luciana Carina Schmidt, on behalf of the requalification of the Spanish University System (2021-2023). Maria Luisa Marin and Francisco Bosca would also like to acknowledge the Spanish Ministry of Science, Innovation, and Universities (TED2021-131952B-I00 and PID2019-110441RB-C33, financed by MCIN/AEI/10.13039/501100011033 and by the European Union Next Generation-EU/PRTR). Maria Jesus Abeledo Lameiro and Maria Inmaculada Polo-Lopez wish to thank the Spanish Ministry of Science and Innovation for funding the NAVIA Project (References: PID2019-110441RB-C32 and PID2019-110441RB-C33, financed by MCIN/AEI/10.13039/501100011033).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis and mechanistic insights of SiO2@WO3@Fe3O4 as a Novel Supported Photocatalyst for Wastewater Remediation under Visible Light

  • Diego-López, Ander|||0000-0001-5947-9579
  • Vidal Moya, José Alejandro
  • Marín García, Mª Luisa|||0000-0002-9789-8894
  • Bosca Mayans, Francisco
  • Cabezuelo, Oscar
[EN] A new optimized photocatalyst for wastewater remediation at neutral pH has been developed and fully characterized. The catalyst features microparticles of SiO2 as a supporting substrate and a uniform shell of WO3 nanoparticles externally decorated with Fe3O4 nanocrystals. The photocatalytic activity of SiO2@WO3@Fe3O4 was evaluated and compared to its SiO2@WO3 counterpart on the photodegradation of methylene blue (MB) under visible light, with and without H2O2. Best results were obtained for SiO2@WO3@Fe3O4 in the presence of H2O2, whose potential for wastewater remediation was further evaluated on the photodegradation and mineralization of a contaminant of emerging concern such as diclofenac (DCF). Furthermore, a photocatalytic mechanism was proposed based on the performed electron paramagnetic resonance (EPR) experiments, which provided evidence for the intermediates generated in all the involved photocatalytic processes. Hence it was proven that .OH is the species responsible for the photocatalyzed oxidation of MB and DCF. The generation of .OH is boosted by a synergistic effect between Fe3O4 and WO3 in the presence of light and H2O2., The authors would like to acknowledge the Spanish Ministry of Science, Innovation, and Universities (PID2019-110441RB-C33 financed by MCIN/AEI/10.13039/501100011033 and TED2021-131952B-I00 financed by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR) . A. Diego-Lopez and O. Cabezuelo are indebted to the Universitat Politecnica de Valencia for the Predoctoral FPI fellowship (FPI-UPV/Subprograma 1) . The authors would like to acknowledge the Servei de Microscopia Electronica from the Universitat Politecnica de Valencia (UPV) for the support on the composite characterization and sample preparation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Towards scalable broad-spectrum photodynamic antimicrobial textiles: synergistic effect of Rose Bengal and commercial cationic fixative on polyamide fabrics

  • Martínez-González, Inés|||0000-0002-7681-2879
  • Moya Sanz, Mª Del Pilar|||0000-0001-9631-3084
  • Andreu, Inmaculada|||0000-0003-3409-9443
  • Díaz-García, Pablo|||0000-0002-7093-6061
  • Blázquez-Moraleja, Alberto|||0000-0003-1375-930X
  • Ayala Mingol, Ildefonso|||0000-0003-1132-9189
  • Bonet-Aracil, Marilés|||0000-0002-8743-560X
  • Marín García, Mª Luisa|||0000-0002-9789-8894
  • Bosca Mayans, Francisco
  • Delgado Villar, Sonia Guadalupe
  • Mateos-Pujante, Alejandro
[EN] The use of photoactive textiles to reduce infection transmission in healthcare facilities and hospitals is not on the market due to the lack of scalable and cost-effective processes to prepare these materials. To address this issue, a new photodynamic antimicrobial fabric of polyamide with Rose Bengal (RB) and a commercial cationic fixative (CF) was prepared with a simple and scalable procedure using a conventional and industrialized process for incorporating dyes into textiles. Both fabrics (with and without CF) produced more than 99% inactivation of Gram-positive and Gram-negative bacteria (Enterococcus faecalis and Escherichia coli, respectively), as well as viruses such as adenovirus rAd5. Nevertheless, it is worth highlighting that the RB fabric with CF achieved 99.9999% inactivation of E. coli and 99.9% inactivation of fungi such as Candida albicans. The study was performed upon typical indoor illumination with visible light (400¿700 nm, 11.3 ± 0.2 mW cm¿2) during periods covering between 30 and 120 min, according to the tested microorganism. Tests performed with textiles to evaluate the persistence of the RB color in them and their capability to photosensitize the inactivation of microorganisms revealed that the CF improves the robustness of the fabric. Furthermore, the photophysical and photodynamic properties of the fabrics were evaluated by direct and indirect methods. In this context, the formation of photoactivable complexes was observed through the association of RB with CF. Moreover, it was established that the remarkable photodynamic efficiency using the fabric with CF is produced through an electron transfer from microorganisms to an excited RB¿CF complex (Type I) and singlet oxygen generated from the triplet excited state of free RB (Type II)., The authors would like to express their gratitude to the Research and Development Grants Programme (PAID-01-22) of the Universitat Politecnica de Valencia for the contract as a pre-doctoral researcher in training (Ines Martinez-Gonzalez), and are also grateful to the Agencia Valenciana de Innovacion for the funding on the strategic projects in cooperation, reference INNEST/2021/75, INNEST/2021/28 and the Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital for CIAPOT/2021/33 to contract P. Norina. We also extend our gratitude to the Generalitat Valenciana and the European Union for co-funding the A.B.M. postdoctoral contract (CIAPOS/2023/201) through the European Social Fund Plus Operational Program 2021-2027 (FSE +). We would also like to extend our thanks to the Spanish Ministry of Science, Innovation and Universities and the State Research Agency (TED2021-131952B-I00 funded by MCIN/AEI/10.13039/501100011033), European Union NextGenerationEU/PRTR. Financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is also gratefully acknowledged.