Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A highly efficient supported TiO2 photocatalyst for wastewater remediation in continuous flow

  • Cabezuelo, Oscar
  • Ponce-Gonzalez, Luis Nicolas
  • Marín García, Mª Luisa|||0000-0002-9789-8894
  • Bosca Mayans, Francisco
[EN] Although TiO2 materials have been extensively studied as photocatalysts, there is not any commercial TiO2- supported photocatalyst used for wastewater remediation. This fact set the goal to synthesize a new supported titanium dioxide photocatalyst which, besides being robust, also has a high reaction surface and a very efficient TiO2 shell thickness. Hence, we present a novel TiO2-supported photocatalyst composed of titania-covered glass wool (GW) fibers decorated with SiO2@TiO2 core-shell spheres. For optimizing the photocatalytic activity of this material, the surface of SiO2 microspheres, as well as, the highly mechanically resistant GW fibers, were covered by a robust titania layer of ca. 20-30 nm of thickness. This layer contains nanometric crystals, ca. 12 nm in size, linked to each other and to the surfaces of both SiO2 microspheres and GW. An exhaustive characterization of the physicochemical properties of this new SiO2-TiO2 composite was performed to confirm the Si-O-Ti linkage and the anatase crystal phase. The photocatalytic activity was initially evaluated in batch through the photo-degradation of Methylene Blue as a standard dye. Afterward, the addition of the new photocatalyst in a solid phase stationary (SPS) photoreactor coupled to a TOC detector allowed studying in situ the mineralization of the recalcitrant pollutant phenol under a continuous flow regime. Results revealed that the optimized TiO2 surface of the SiO2-TiO2 composite produced the complete mineralization of phenol in less than three minutes. Even more, it was demonstrated that this photocatalyst is suitable for the industrial scale-up of wastewater treatment because it does not leach titania, its reuse does not require filtration procedures, and it can be easily implemented in SPS photoreactors at plant scale. In this context, the new material could be a good starting point to prepare other supported photocatalysts for wastewater remediation., Ph.D. Scholarship from Universitat Politecnica de Valencia for the Predoctoral FPI fellowship (FPI-UPV/Subprograma 1) for O.C., the Spanish Ministry of Science and Innovation (PID2019-110441RB-C33 financed by MCIN/AEI/10.13039/501100011033, PDC2022-133426-I00 and TED2021-131952B-I00 financed by MCIN/AEI/10.13039/501100011033 and European Union Next Generation/PRTR) and Spanish National Research Council (open access charge) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Scalable continuous-flow photocatalytic system based on a TiO2-coated sand composite for microplastic mineralization

  • Company-Doménech, Carlos|||0009-0005-7484-3996
  • Blázquez-Moraleja, Alberto|||0000-0003-1375-930X
  • Bosca Mayans, Francisco
  • Marín García, Mª Luisa|||0000-0002-9789-8894
[EN] Microplastics (MPs) represent a persistent environmental threat, with polyethylene terephthalate MPs (PET) from textiles and domestic washing posing particular challenges due to their widespread use in bottles, cleaning products, and clothing fibers. While most reported photocatalysis strategies for PET degradation rely on TiO 2 suspensions, often requiring pH adjustment or chemical additives, we present here the first continuous-flow system to achieve effective mineralization of PET directly in untreated domestic washing wastewater generated without detergent addition. Accordingly, an optimized TiO 2 and SiO UVA LED 2 -SiO layer was immobilized onto commercial sand microspheres, and the resulting materials were integrated to yield a structurally robust photocatalytic system (sand@TiO 2 2 @TiO 2 ) that synergistically combines the intrinsic mechanical filtration capacity of sand with the enhanced specific surface area provided by the TiO 2-functionalized SiO 2 microspheres. This material was thoroughly characterized using FESEM, Raman, XRD, UV¿Vis diffuse reflectance, and XPS. Its implementation in a lab-scale tubular photoreactor equipped with LED lamps (¿ max 1 =362 nm) demonstrated complete removal of PET microplastics from wastewater generated from domestic textile washing with tap water at a flow rate of 0.05 L h , as confirmed by COD, TOC, gravimetry, turbidimetry, FTIR, and microscopy. Mechanistic elucidation of PET photodegradation was achieved using EPR and LC-MS. The results of this study indicate that the sand@TiO 2-SiO 2 @TiO 2 photocatalyst is effective for the mineralization of microplastics in continuous-flow systems. This scalable strategy advances microplastic remediation by linking traditional laboratory-scale suspension photocatalysis research with real-world wastewater treatment applications. Moreover, this approach paves the way for the design of new advanced materials to improve microplastic removal., This research was supported by the Spanish Ministry of Science and Innovation through grants TED2021-131952B-I00, PDC2022-133426- I00, and CEX2021-001230-S, funded by MCIN/AEI/10.130 39/501100011033. Additional financial support was provided by the Generalitat Valenciana through the CLEAN-LAGOON project (PROMETEO/CIPROM-2024-49), the Agencia Valenciana de la Innovacion (AVI, grant 20220826/UCIE-ITQ), and the Ayuda a Primeros Proyectos de Investigacion ¿ (PAID-06-24) from the Universitat Polit`ecnica de Valencia. The authors also acknowledge the Generalitat Valenciana and the European Union for co-funding the postdoctoral contract of A.B.M. (CIAPOS/2023/201) through the European Social Fund Plus (ESF+) Operational Program 2021 2027. C.C⋅D acknowledges the Universitat Politecnica de Valencia for the Predoctoral FPI fellowship (FPI-UPV/ Subprograma 2) and the Spanish Catalysis Society for the master's thesis scholarship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mineralization of pollutants in water at neutral pH through a heterogeneous photo-Fenton-like process generated by SiO2@TiO2@Fe3O4 in the presence of PMS

  • Cabezuelo-Gandia, Oscar
  • Diego-López, Ander|||0000-0001-5947-9579
  • Marín García, Mª Luisa|||0000-0002-9789-8894
  • Bosca Mayans, Francisco
[EN] The photo-Fenton process has been proposed as a suitable strategy for efficiently oxidizing organic contaminants in water. However, its applicability is limited by pH and homogeneous medium requirements. In this sense, the present study aimed to surpass those limitations through a novel heterogenous SiO2@TiO2@Fe3O4 photocatalyst, which combines a core-support of SiO2 with an internal semiconductor shell of TiO2 and an external shell of magnetic Fe3O4 nanocrystals. Photocatalytic ortho-phenylphenol (OPP) degradation using this photocatalyst in the presence of H2O2 or PMS at a neutral pH showed a much faster OPP mineralization in the presence of PMS than when H2O2 was used as the oxidant. To understand this finding, EPR assays were performed, and their results revealed that a photo-Fenton-like oxidation process occurs when SiO2@TiO2@Fe3O4 photocatalyst is irradiated in the presence of PMS at neutral pH aqueous media. Thus ·OH and SO4·- radicals are generated during this process. However, the main reactive intermediate detected changing PMS by H2O2 was ·OOH radical. Hence, the high oxidation capability of ·OH and SO4·- radicals justify the fast OPP mineralization observed in the presence of PMS. Furthermore, an extensive evaluation of the new magnetic photocatalyst confirmed its robustness, showing consistent performance over multiple cycles without detecting significant iron leaching. Lastly, it is worth highlighting that the magnetic properties of Fe3O4 of this new photocatalyst, coupled with the core@shell technology, offer a technical improvement in efficiently separating inorganic photocatalysts from the reaction medium by applying an appropriate magnetic field., Predoctoral FPI fellowships (FPI-UPV/Subprograma 1) for O.C. and A.D., the Spanish Ministry of Science and Innovation (PDC2022 133426-I00 and TED2021 131952B-I00 financed by MCIN/AEI/10.13039/501100011033 and European Union Next Generation/PRTR), and CRUE-Universitat Politecnica de Valencia (open access charge) are gratefully acknowledged. Financial support by the Spanish Ministry of Science and Innovation (CEX2021 001230-S grant funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A highly efficient supported TiO2 photocatalyst for wastewater remediation in continuous flow

  • Cabezuelo, Oscar
  • Ponce-González, Luis N.
  • Marín, María Luisa
  • Boscá, Francisco
Although TiO materials have been extensively studied as photocatalysts, there is not any commercial TiO-supported photocatalyst used for wastewater remediation. This fact set the goal to synthesize a new supported titanium dioxide photocatalyst which, besides being robust, also has a high reaction surface and a very efficient TiO shell thickness. Hence, we present a novel TiO-supported photocatalyst composed of titania-covered glass wool (GW) fibers decorated with SiO@TiO core-shell spheres. For optimizing the photocatalytic activity of this material, the surface of SiO microspheres, as well as, the highly mechanically resistant GW fibers, were covered by a robust titania layer of ca. 20–30 nm of thickness. This layer contains nanometric crystals, ca. 12 nm in size, linked to each other and to the surfaces of both SiO microspheres and GW. An exhaustive characterization of the physicochemical properties of this new SiO-TiO composite was performed to confirm the Si[sbnd]O[sbnd]Ti linkage and the anatase crystal phase. The photocatalytic activity was initially evaluated in batch through the photodegradation of Methylene Blue as a standard dye. Afterward, the addition of the new photocatalyst in a solid phase stationary (SPS) photoreactor coupled to a TOC detector allowed studying in situ the mineralization of the recalcitrant pollutant phenol under a continuous flow regime. Results revealed that the optimized TiO surface of the SiO-TiO composite produced the complete mineralization of phenol in less than three minutes. Even more, it was demonstrated that this photocatalyst is suitable for the industrial scale-up of wastewater treatment because it does not leach titania, its reuse does not require filtration procedures, and it can be easily implemented in SPS photoreactors at plant scale. In this context, the new material could be a good starting point to prepare other supported photocatalysts for wastewater remediation., Ph.D. Scholarship from Universitat Politècnica de València for the Predoctoral FPI fellowship (FPI-UPV/Subprograma 1) for O.C., the Spanish Ministry of Science and Innovation (PID2019-110441RB-C33 financed by MCIN/AEI/10.13039/501100011033, PDC2022-133426-I00 and TED2021-131952B-I00 financed by MCIN/AEI/10.13039/501100011033 and European Union Next Generation/PRTR) and Spanish National Research Council (open access charge) is gratefully acknowledged.