Pasar al contenido principal

SINTESIS, CARACTERIZACION Y APLICACIONES DE NUEVOS MATERIALES PARA LA ELIMINACION DE CONTAMINANTES EMERGENTES EN AGUAS RESIDUALES

PID2021-123431OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD AUTONOMA DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of the surface terminal groups on the efficiency of two-electron oxygen reduction reaction by iron single atoms on Ti3C2Tx (Tx=Cl, Br, NH) MXene

  • Kruger, Dawid Daniël
  • Goberna-Ferrón, Sara|||0000-0002-3306-3791
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Delgado, Juan Jose
  • Recio, F. Javier
[EN] Two Ti3C2 MXenes having single atom Fe were prepared from a Ti3AlC2 precursor by Al etching using an FeX2 (X = Cl, Br) Lewis acid as an etching reagent in NaCl/KCl molten salt. After removal of the excess Fe metal using concentrated aqueous HX solution, the resulting MXenes having Cl or Br surface terminations were concomitantly doped with single Fe atoms. A third sample was prepared from Fe(SA)-Ti3C2Brx by exchanging Br with -NH- using LiNH2 in molten salt. The presence of single atom Fe was determined by aberration corrected high-angle annular dark-field scanning transmission electron microscopy (AC-HAADF-STEM) with atomic resolution where isolated Fe atoms were observed. These Fe(SA)-Ti3C2Tx materials exhibit electrocatalytic activity for the oxygen reduction reaction (ORR), with the selectivity to H2O2 depending on the surface termination and the electrolyte pH. Involvement of Fe SA was inferred from the onset potential of the ORR and the Fe(III)/Fe(II) reduction potential and the change of the Tafel slope in this region. Under the best conditions, at pH 13, Fe(SA)-Ti3C2(NH)(x) exhibits for the ORR an average electron transfer number (n) of 2.5, which corresponds to an H2O2 generation efficiency of 75%; these data compare well with those of the best Fe single-atom electrocatalysts., Financial support was provided by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S, PID2021-126071OB-C21\ and PID2021-123431OB-I00 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1). The European Commission (ERC Adv., Grant Discovery) is also acknowledged. We thank the Advanced Microscopy Center of the University of Cadiz for granting instrument time.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Epitaxial Fe Coating on Single- and Few-Layer Mo2C MXene as Highly Efficient Catalyst for Ambient Electrochemical Ammonia Synthesis

  • Midre, Sabine Eliane
  • Tian, Liang|||0000-0002-3801-653X
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Goberna-Ferrón, Sara|||0000-0002-3306-3791
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
[EN] Iron-intercalated Mo2C MXene (Fe/Mo2C) is presented as a robust, earth-abundant electrocatalyst for ambient ammonia synthesis. An in situ HF protocol converts Mo2Ga2C MAX into few-layer Mo2C terminated with =O/-F groups; subsequent wet impregnation followed by mild reduction deposits 7 wt % Fe(0) as an epitaxial coating that lines the internal van der Waals galleries and simultaneously blankets the external basal planes of the Mo2C MXene. Aberration-corrected STEM, FFT/inverse-FFT analysis, and STEM-EDX depth profiling verify lamellar Fe domains that connect neighboring Mo2C sheets while preserving crystallinity. This hybrid architecture halves the charge-transfer resistance (EIS) and provides a high density of Fe sites that preferentially adsorb N-2 over protons. In neutral 0.1 M Na2SO4, the optimized material achieves a Faradaic efficiency of 28.8% and an NH3 yield of 19.1 mu mol h(-1) mg(Fe)(-1) at 0.25 V vs RHE, matching or surpassing noble-metal benchmarks under ambient conditions. Operando ATR-SEIRAS detects N-N and -NHx vibrations consistent with an associative pathway, and N-15(2) labeling confirms the nitrogen source. The catalyst maintains stable performance for 10 h with no detectable Fe leaching. Thus, the combination of the activity of Fe overlayers with the conductive, mechanically resilient Mo2C framework renders a material with remarkable electrocatalytic activity for green-ammonia production., Financial support was provided by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S, PID2021-126071OB-C21\, and PID2021-123431OB-I00 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1). The European Commission (ERC Adv., Grant Discovery) is also acknowledged. We thank Dr. Abdessamad Grirrane for his help and support with isotopic labeling experiments.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of surface terminal groups on the efficiency of two-electron oxygen reduction reaction catalyzed by iron single atoms on Ti3C2Tx (T = Cl, Br, NH) MXene

  • Kruger, Dawid Daniël
  • Delgado, Juan José
  • Recio, F. Javier
  • Goberna-Ferrón, Sara
  • Primo, Ana
  • García Gómez, Hermenegildo
Two TiC MXenes having single atom Fe were prepared from a TiAlC precursor by Al etching using an FeX (X = Cl, Br) Lewis acid as an etching reagent in NaCl/KCl molten salt. After removal of the excess Fe metal using concentrated aqueous HX solution, the resulting MXenes having Cl or Br surface terminations were concomitantly doped with single Fe atoms. A third sample was prepared from Fe(SA)-TiCBr by exchanging Br with -NH- using LiNH in molten salt. The presence of single atom Fe was determined by aberration corrected high-angle annular dark-field scanning transmission electron microscopy (AC-HAADF-STEM) with atomic resolution where isolated Fe atoms were observed. These Fe(SA)-TiCT materials exhibit electrocatalytic activity for the oxygen reduction reaction (ORR), with the selectivity to HO depending on the surface termination and the electrolyte pH. Involvement of Fe SA was inferred from the onset potential of the ORR and the Fe(iii)/Fe(ii) reduction potential and the change of the Tafel slope in this region. Under the best conditions, at pH 13, Fe(SA)-TiC(NH) exhibits for the ORR an average electron transfer number (n) of 2.5, which corresponds to an HO generation efficiency of 75%; these data compare well with those of the best Fe single-atom electrocatalysts., Financial support was provided by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S, PID2021-126071OB-C21\ and PID2021-123431OB-I00 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1). The European Commission (ERC Adv., Grant Discovery) is also acknowledged. We thank the Advanced Microscopy Center of the University of Cadiz for granting instrument time.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Study of M-N-C@FeNPs(M: Fe, Co, Ni) bifunctional electrocatalysts as positive electrodes for rechargeable Zn-air batteries

  • Fernández-Velayos, S
  • Sigüenza, A.
  • Venegas, R.
  • Mazario, E.
  • Menédez, N.
  • Palomares, F.J.
  • Álvarez, J.
  • Capitán, M. J.
  • Herrasti, P.
  • García-Quismondo, E.
  • Sánchez, J.S.
  • Muñoz-Becerra, K.
  • Recio, F.J.
12 pages, 5 figures, 3 tables, Rechargeable Zn-air batteries are promising energy storage systems. Nevertheless, it is necessary to develop efficient bifunctional OER/ORR catalysts based on non-precious metals. In this work, different M-N-C@Fe catalysts were synthesized using FeO nanoparticles as a template and Fe source. Aniline and different metallic salts (Fe, Co, and Ni) were used as carbon, nitrogen, and metallic precursors. The catalysts were characterized by HRTEM, EDX, XPS, XRD,Fe Mössbauer spectroscopy, and electrochemical techniques, evidencing the presence of M-Nx units and Fe-based nanoparticles in the N-doped carbon material, where the M-Nx units act as the primary ORR/OER active sites. The electrocatalytic activities, studied using a rotating ring-disk electrode in alkaline media, showed that the Ni-based material presents the best performance, achieving a ΔE value of 0.82 V. The Ni-N-C@Fe catalyst was tested as a positive electrode in a Zn-air battery and compared with a commercial PtRuC 20 %. Notably, it displayed a remarkable performance and cyclability, surpassing the commercial catalyst with a round-trip voltage of 1.30 V after 50 h. The improved performance may be associated with the catalytic activity of the Ni-Nx active sites acting in synergy with the Fe-based nanoparticles embedded within the graphitized carbon matrix., Financial support was provided by the Spanish Ministry of Science and Innovation (PID2021-123431OB-I00 and PID2021-123295NB-I00 funded by MCIN/AEI/10.13039/501100011033). Grant TED2021- 132482B-I00 by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, by the “European Union NextGenerationEU/ PRTR”. FONDECYT Projects 11221073 and 11241509.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Emerging pollutant degradation processed by a novel 3D printed monolith: Performance evaluation and mechanisms

  • Fernández-Velayos, S.
  • Menéndez, N.
  • Palomares, F. Javier
  • Herrasti, P.
  • Juanes, O.
  • Sánchez-Marcos, J.
  • Mazarío, E.
In the current study, a novel Cu@PLA monolith was prepared by 3D printing technology to activate persulfate (PS) for ciprofloxacin (CIP) removal. This study focuses on the development of a 3D catalyst from a commercial filament with a 73 wt.% Cu composition. The monolith design was a cylinder with an internal mesh, adopted to improve the fluid dynamics of the process. Continuous-flow reactor experiments were conducted to investigate the effects of different operating parameters on CIP removal. Our findings indicated that the immersion of Cu@PLA monolith in an alkaline solution for 15 min activated the surface of the catalyst owing to the increase in Cu at% and the Cu 2p signal observed in XPS. After this process, the PS dose was optimised to 0.5 mM to achieve 90 % of CIP degradation. The other parameters were pH0 = 5, flow rate = 0.22 mL/min, Tª = 25°C and CIP = 1.3 ppm. The performance in long-term experiments (7 days) was excellent, with a slight efficiency decrease from the first hours (90 %) to 84 % at the end of the experiment. Moreover, the degradation mechanisms and transformation pathways were elucidated by scavenging tests and liquid chromatography/mass spectrometry, respectively. Finally, the feasibility of the system was demonstrated in real water matrices., This research has been supported by the Spanish Ministry of Science and Innovation thorough the project PID2021-123431OB-I00. FJP acknowledges financial support from Grants TED2021-132482B-I00 and PID2021-126169OB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe” and the “European Union NextGenerationEU/PRTR”., Peer reviewed