Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Insights into the formation of free radicals using metal ferrite nanocatalysts (MFe2O4, M = Fe, Mn, Zn, Co) prepared by a highly reproducible microwave-assisted polyol method

  • Gallo-Cordova, Álvaro
  • Nuñez, Nahuel
  • Díaz-Ufano, Carlos
  • Veintemillas-Verdaguer, S.
  • Soler-Morala, Jimena
  • Palomares, F. Javier
  • Lima, Enio
  • Winkler, Elin L
  • Morales, María Del Puerto
Metal ferrite nanocatalysts possess renowned catalytic properties in advanced oxidation processes. This study aims to elucidate the impact of various parameters on their catalytic activity by measuring the formation of reactive oxygen species. Utilizing a microwave-assisted polyol method, we designed specific catalysts, demonstrating high reproducibility (>95%) of their structural, colloidal, and magnetic properties. Electron paramagnetic resonance (EPR) analysis described intricate catalytic dynamics influenced by buffer composition, particle size, and transition metal doping. The presence of buffer in the EPR measurement of the maghemite nanocatalyst with a size of 14 ± 3 nm induced a secondary reaction between ˙OOH and the DMPO spin-trap, shielding the radical signal by primarily generating CH3 radicals, potentially hindering degradation. Smaller maghemite nanocatalysts (8 ± 2 nm) exhibited enhanced radical production due to increased surface area. Upon metal doping, manganese enhances ˙OOH radical production, while zinc inhibits ROS formation, and cobalt exerts nuanced influence. Additionally, catalytic efficiency in methylene blue degradation varied with the radical species, highlighting ˙OH radicals' superiority for rapid degradation (1 h) over ·OOH (24 h). Overall, this research provides valuable insights into nanoparticle synthesis, radical formation kinetics, and catalytic performance, contributing to the advancement of sustainable catalysis for environmental remediation., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 101007629 (NESTOR Project), the “Plan de Recuperación, Transformación y Resiliencia” financed by the European Union – NextGenerationEU under the Humidity-Plus project and from the Spanish Government (PID2023-150170OB-I00, TED2021- 130191B-C43) by MCIU/AEI/ 10.13039/501100011033 and European Union NextGenerationEU/PRTR. FJP acknowledges financial support from Grants TED2021-132482B-I00 and PID2021-126169OB-I00 funded by MCIN/AEI/10.13039/ 501100011033 and by “ERDF A way of making Europe”. The Servicio Interdepartamental de Investigación at the Universidad Autónoma de Madrid, the TEM Service at the Centro de Biología Molecular Severo Ochoa (CBMSO, CSIC-UAM), and XRD, FTIR and elemental analysis services at ICMM/CSIC are acknowledged for assistance for the characterization studies., The data supporting the findings of this study are included in the article and its ESI.† Additional raw data (e.g., TEM images, FTIR and EPR spectra, and numerical values used in the figures) are available from the corresponding author upon reasonable request., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Emerging pollutant degradation processed by a novel 3D printed monolith: Performance evaluation and mechanisms

  • Fernández-Velayos, S.
  • Menéndez, N.
  • Palomares, F. Javier
  • Herrasti, P.
  • Juanes, O.
  • Sánchez-Marcos, J.
  • Mazarío, E.
In the current study, a novel Cu@PLA monolith was prepared by 3D printing technology to activate persulfate (PS) for ciprofloxacin (CIP) removal. This study focuses on the development of a 3D catalyst from a commercial filament with a 73 wt.% Cu composition. The monolith design was a cylinder with an internal mesh, adopted to improve the fluid dynamics of the process. Continuous-flow reactor experiments were conducted to investigate the effects of different operating parameters on CIP removal. Our findings indicated that the immersion of Cu@PLA monolith in an alkaline solution for 15 min activated the surface of the catalyst owing to the increase in Cu at% and the Cu 2p signal observed in XPS. After this process, the PS dose was optimised to 0.5 mM to achieve 90 % of CIP degradation. The other parameters were pH0 = 5, flow rate = 0.22 mL/min, Tª = 25°C and CIP = 1.3 ppm. The performance in long-term experiments (7 days) was excellent, with a slight efficiency decrease from the first hours (90 %) to 84 % at the end of the experiment. Moreover, the degradation mechanisms and transformation pathways were elucidated by scavenging tests and liquid chromatography/mass spectrometry, respectively. Finally, the feasibility of the system was demonstrated in real water matrices., This research has been supported by the Spanish Ministry of Science and Innovation thorough the project PID2021-123431OB-I00. FJP acknowledges financial support from Grants TED2021-132482B-I00 and PID2021-126169OB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe” and the “European Union NextGenerationEU/PRTR”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structural and magnetic properties of composite powders prepared by high-energy milling of ZnO and Fe3O4 precursors

  • Casanova, A.
  • Zamora Alfonso, Ligia Edith
  • Palomares, F. Javier
  • González Fernández, Jesús María
  • Pérez Alcázar, G. A.
Aiming at the preparation of Fe-doped zincite exhibiting magnetic order, ZnO and magnetite (Fe3O4) precursor powders were milled in a high-energy planetary ball mill. The process was completed in 24 h, under vacuum, and employing a ball-to-powder weight ratio (BPR) of 30:1. The milled powders were characterized by using X-ray diffraction (XRD), Mössbauer spectroscopy (MS), and vibrating sample magnetometry (VSM). XRD data revealed the presence of a primary wurtzite structure (zincite) alongside a secondary ZnFe2O4 (franklinite) phase. Mössbauer spectra (MS), fitted with two doublets, (attributed to Fe-doped ZnO and to ZnFe2O4, respectively) in correspondence with a paramagnetic behaviour. In contrast with the Mössbauer data, VSM measurements allowed to observe hysteretic behaviour at both low and room temperatures, indicating the occurrence at that temperature range of magnetic ordering. We propose that both sets results are related to the occurrence of polaron-mediated magnetic order arising from the presence (as detected by XRD) of oxygen vacancies in the ZnO lattice. The interplay between defect-induced carriers and localized spins provides a plausible mechanism for the observed room-temperature ferromagnetism., The authors would like to thank the support given by the University del Valle. C.I. 7975. FJP and JMG would also acknowledge financial support within AEI projects PID2021-126169OB-I00 and TED2021-132482B-I00., Peer reviewed