Pasar al contenido principal

Foto y electrocatalizadores para la conversión y almacenamiento de energía

RYC2021-031006-I

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Desarrollar, Atraer y Retener Talento
Subprograma Subprograma Estatal de Incorporación
Convocatoria Ramón y Cajal
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 22
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Supramolecular interaction of a molecular catalyst with a polymeric carbon nitride photoanode enhances photoelectrochemical activity and stability at neutral pH

  • Mondal, Sanjit
  • Salati, Martina|||0000-0001-5681-7245
  • Nicaso, Marco
  • Albero, Josep|||0000-0002-4841-7206
  • Segado Centellas, Mireia|||0000-0002-1290-6403
  • Volokh, Michael|||0000-0001-8510-9336
  • Bo, Carles|||0000-0001-9581-2922
  • García, Hermenegildo|||0000-0002-9664-493X
  • Gil-Sepulcre, Marcos|||0000-0002-2839-8108
  • Llobet Dalmases, Antoni|||0000-0002-6176-5272
  • Shalom, Menny|||0000-0002-4506-4177
Polymeric carbon nitride (CN) emerged as an alternative, metal-free photoanode material for water-splitting photoelectrochemical cells (PECs). However, the performance of CN photoanodes is limited due to the slow charge separation and water oxidation kinetics due to poor interaction with water oxidation catalysts (WOCs). Moreover, operation under benign, neutral pH conditions is rarely reported. Here, we design a porous CN photoanode connected to a highly active molecular Ru-based WOC, which also acts as an additional photo-absorber. We show that the strong interaction between the π-system of the heptazine units within the CN with the CH groups of the WOC's equatorial ligand enables a strong connection between them and an efficient electronic communication path. The optimized photoanode exhibits a photocurrent density of 180 ± 10 μA cm -2 at 1.23 V vs. the reversible hydrogen electrode (RHE) with 89% faradaic efficiency for oxygen evolution with turnover numbers (TONs) in the range of 3300 and a turnover frequency (TOF) of 0.4 s -1, low onset potential, extended incident photon to current conversion, and good stability up to 5 h. This study may lead to the integration of molecular catalysts and polymeric organic absorbers using supramolecular interactions. Supramolecular interaction of a Ru oligomeric catalyst with polymeric carbon nitride forms CN-Ru hybrid system, achieving high photoelectrochemical water-splitting activity, enhanced stability, and.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Light-assistance in nitrogen fixation to ammonia by highly dispersed Cs-promoted Ru clusters supported on ZrO2

  • Yong, Peng
  • Shi, Run
  • Antonio Franconetti
  • Melillo, Arianna
  • Forneli Rubio, Mª Amparo
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Light-assisted N-2 fixation to NH3 under mild conditions is attracting massive attention to circumvent energy crisis and global warming. Herein, highly dispersed Cs-decorated Ru sub-nanometric clusters supported on ZrO2 NPs have been prepared by means of MOF-templated transformation method. The obtained catalyst exhibited N-2 hydrogenation activity of 1.6 mmolNH3 g(cat)(-1) h (-1) in the dark (350.C, 0.1 MPa). Remarkably this value increased by over 300 %, reaching 5.1 mmolNH3 g(cat)(-1) h (-1) (204 mmolNH3 g(Ru)(-1) h (-1)) under 1 Sun power illumination (1080 W/ m2) The influence of the incident light wavelength has been evaluated, revealing 81 % and 213 % enhancement in the NIR and visible region, respectively. DFT calculations were carried out to understand the static adsorption states of Ru sub-nanoclusters. Mechanistic studies have confirmed the co-existence of a photothermal and a nonthermal-hot electron mechanism. XPS, PXRD and FTIR analysis have determined that the Cs species block surface Zr4+ acidity, increasing the basicity of the ZrO2 support. Moreover, partially reduced Cs delta+ (0 <delta < 1) species surrounding the Ru active sites are donating electron density to the adjacent Ru sites, favoring N-2 adsorption and subsequent activation. Finally, this photocatalyst has shown an extended stability for 100 h irradiation under continuous flow., Financial support by the Spanish Ministry of Science and Innovation (PDI2021-126071-OB-C21 financed support by MCIN/AEI/10.13039/ 501100011033 and by FEDER "Una manera de hacer Europa"), and Severo Ochoa (CEX2021-1230-S financed support by MCIN/AEI/ 10.13039/501100011033) is gratefully acknowledged. Generalitat Valenciana (Prometeu 2021-038 and MFA-2022-023 financed by European Union-Next Generation EU, through the Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital) and European Union Horizon 2020 Research and Innovation Programme (Flow-PhotoChem Grant Agreement 862453) are also gratefully acknowledged. J.A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021-031006-I financed support by MCIN/AEI/10.13039/501100011033 and by European Union/NextGenerationEU/ PRTR).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

MOF-derived ZnO-promoted NiCoP nanoparticles as efficient anodes for battery-supercapacitor hybrid devices

  • Hu, Jiajun
  • Rendon-Patiño, Alejandra
  • Khan, Il Son
  • Garzon-Tovar, Luis
  • Mateo, Diego
  • Gascon, Jorge
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Battery-supercapacitor hybrid devices are very convenient energy storage devices since they offer the combined advantages of both batteries (excellent energy density) and supercapacitors (high power density, long service life and high reversibility). However, cost-effective electrodes based on abundant and non-toxic materials exhibiting high energy storage density are still to be discovered. Herein, we have prepared ZnO promoted-NiCoP nanoparticles supported on graphitic carbon (ZnNiCoP/C) from heterotrimetallic MOF-74 derivatization. The electrochemical properties for energy storage of the resulting material have been investigated. The performance of ZnNiCoP/C as hybrid anode displays an improved capacity (343.3 mA & sdot;h & sdot;g- 1 at 2 A & sdot;g- 1) compared with its bimetallic counterparts. Performance-structure relationships have been established, demonstrating that ZnO works cooperatively with NiCoP maintaining the structural properties of the MOF-74 precursor, while the NiCoP particles have been determined as the electrochemically active sites. Moreover, complete asymmetric batterysupercapacitor hybrid devices have been fabricated comprising ZnNiCoP/C as anode and a N-doped carbon cathode, obtaining energy densities from 44.6 W & sdot;h & sdot;Kg- 1 at 1500 W & sdot;Kg- 1 using a liquid electrolyte, and 35.4 W & sdot;h & sdot;Kg- 1 at 1500 W & sdot;Kg- 1 with a quasi-solid-state electrolyte, highlighting the applicability of this material in energy storage applications. Furthermore, the fabricated device has demonstrated to retain more than 90 % of its initial performance after 5000 charge-discharge cycles, highlighting the stability of this material., Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa CEX2021-1230-S financed support by MCIN/AEI/10.13039/501100011033 and PDI2021-126071-OB-C21 financed support by MCIN/AEI/10.13039/501100011033 and by FEDER "Una manera de hacer Europa") , King Abdullah University of Science and Technology (KAUST) and Generalitat Valenciana (Prometeu 2021-038 and MFA-2022-023 financed by European Union-Next Generation EU, through the Conselleria de Innovacion, Universidades, Ciencia y Socie-dad Digital) are gratefully acknowledged. J.A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021-031006-I financed support by MCIN/AEI/10.13039/501100011033 and by European Union/NextGenerationEU/PRTR) and Generalitat Valenciana (CIGE 2022-093) financed by European Union-Next Generation EU, through the Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital. J.H. thanks the Chinese Scholarship Council for doctoral fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Supramolecular interaction of a molecular catalyst with a polymeric carbon nitride photoanode enhances photoelectrochemical activity and stability at neutral pH

  • Mondal, Sanjit
  • Salati, Martina
  • Nicaso, Marco
  • Segado-Centellas, Mireia
  • Michael Volokh
  • Bo, Carles
  • Gil-Sepulcre, Marcos
  • Llobet, Antoni
  • Menny, Shalom
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Polymeric carbon nitride (CN) emerged as an alternative, metal-free photoanode material for water-splitting photoelectrochemical cells (PECs). However, the performance of CN photoanodes is limited due to the slow charge separation and water oxidation kinetics due to poor interaction with water oxidation catalysts (WOCs). Moreover, operation under benign, neutral pH conditions is rarely reported. Here, we design a porous CN photoanode connected to a highly active molecular Ru-based WOC, which also acts as an additional photo-absorber. We show that the strong interaction between the pi-system of the heptazine units within the CN with the CH groups of the WOC's equatorial ligand enables a strong connection between them and an efficient electronic communication path. The optimized photoanode exhibits a photocurrent density of 180 +/- 10 mu A cm(-2) at 1.23 V vs. the reversible hydrogen electrode (RHE) with 89% faradaic efficiency for oxygen evolution with turnover numbers (TONs) in the range of 3300 and a turnover frequency (TOF) of 0.4 s(-1), low onset potential, extended incident photon to current conversion, and good stability up to 5 h. This study may lead to the integration of molecular catalysts and polymeric organic absorbers using supramolecular interactions., This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (Grant Agreement No. 849068). This work was also partially supported by the Israel Science Foundation (ISF), Grant No. 601/21. MS and MN acknowledge the Ministerio de Ciencia e Innovacion (MICINN) for the grants PRE2020-093789 and PRE2020-093521, respectively. CB gratefully acknowledges MCINN/AEI/10.13039/501100011033 for projects PID2020-112806RB-I00 and CEX2019-000925-S, the ICIQ Foundation and the CERCA program of the Generalitat de Catalunya for funding. HG thanks MICINN (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033), Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union Next Generation EU PRTR-C17.I1). JA thanks the MICINN for a Ramon y Cajal research associate contract (RYC2021-031006-I funded by MCIN/AEI/10.13039/501100011033 and by "European Union Next Generation EU/PRTR), and acknowledges the financial support (PID2022-141099OA-I00 funded by MCINN/AEI/10.13039/501100011033 and by "European Union Next Generation EU/PRTR). AL acknowledges MICINN through the project PID2022-140143OB-I00, Generalitat de Catalunya for the project 2017 SGR 1631 and Severo Ochoa (CEX2019-000925-S).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mixed Fe-Mo carbide prepared by a sonochemical synthesis as highly efficient nitrate reduction electrocatalyst

  • Hu, Jiajun
  • Osella, Silvio
  • Arizono dos Reis, Eduardo
  • Brunca da Silva, Anelisse
  • Ribeiro, Caue
  • Helena Mascaro, Lucia
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Ammonia, a versatile compound that can be used as a fertilizer, chemical or fuel, has since long been produced through the energy-intensive Haber-Bosch process. Recently, the electrochemical nitrate reduction reaction (NO3RR) using electricity generated from renewable sources has attracted widespread attention. However, the complex reaction pathway of NO3RR leads to the formation of many undesirable by-products. Herein we successfully prepared a mixed (FeMo)2C catalyst with good electrocatalytic NO3RR, having a NH3 yield of 14.66¿mg¿h-1 cm-2 and an FE of 94.35% at low potential -0.3¿V vs RHE. DFT calculations show that the presence of Fe in Mo2C lattice changes the reaction mechanism, decreasing the potential barrier to be overcome from 1.36 to 0.89¿eV. In addition, mixed Fe-Mo carbide facilitates the adsorption of intermediates and promotes NH3 desorption, facilitating NO3¿ reduction to NH3. In addition, (FeMo)2C was used as cathode for Zn-NO3 battery to generate electricity, producing ammonia at the same time, with a power density of 3.8 mWcm-2 and an NH3 FE of 88%. This work describes a new synthesis method for mixed metal carbides and provides a promising strategy for NH3 production., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/ 10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1). J.H. thanks the Chinese Scholarship Council for a postgraduate scholarship to perform his PhD at Valencia. J.A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021 031006-I financed support by MCIN/AEI/10.13039/501100011033 and by European Union/NextGenerationEU/PRTR), and Generalitat Valenciana financial support (CIGE 2022-093) financed by European Union-Next Generation EU, through the Conselleria de Innovacion, ¿ Universidades, Ciencia y Sociedad Digital. S.O. thanks the National Science Centre, Poland (grant no. UMO/2020/39/I/ST4/01446) and the Excellence Initiative Research University (IDUB) Program, Action I.3.3 Establishment of the Institute for Advanced Studies (IAS) for funding (grant no. UW/IDUB/2020/25). The computation was carried out with the support of the Interdisciplinary Center for Mathematical and Computational Modeling at the University of Warsaw (ICM UW) under grants no. G83-28 and GB80-24.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Structural Evolution of Stapes Controls the Electrochemical CO2 Reduction on Bimetallic Cu-doped Gold Nanoclusters

  • Ibáñez-Alé, Enric
  • Hu, Jiajun
  • Simonelli, Laura
  • Marini, Carlo
  • López, Nuria
  • Barrabés, Noelia
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Goberna-Ferrón, Sara|||0000-0002-3306-3791
[EN] Ligand protected gold nanoclusters have been proposed for electrochemical CO2 reduction (eCO(2)R) as an alternative to polycrystalline catalysts, showing higher selectivity control due to the tailored composition and precise microenvironment. Here, two gold cluster families are studied with different staple motifs (Au-25(SR)(18) and Au-144(SR)(60), where SR = thiolate) doped with Ag or Cu to understand the interplay between the composition and the performance of these catalysts. Detailed cluster characterization and Density Functional Theory simulations demonstrate that the dynamic aspects involving ligand removal are crucial to unraveling the role of the dopant, the cluster curvature, and the staple structure. The best activity performance toward CO is obtained for Cu-doped Au-144(SR)(60) at U = -0.8 V-RHE as ligands are only partially depleted and the staple can bend to stabilize *CO intermediate, while Cu-containing Au-25(SR)(18) can produce formate but shows worse CO selectivity. This study points toward the importance of ligand stability during eCO(2)R on bimetallic gold nanoclusters, paving the way for improving the design and operation of this family of catalysts., This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 894270. The authors acknowledge financial support from the Spanish Ministry of Science and Innovation (PRE2021-097615, PID2021-122516OB-I00, and Severo Ochoa Centre of Excellence CEX2019-000925-S 10.13039/501100011033), the Austrian Science Fund (FWF) via grant Elise Richter (V831-N), and the COSY COST action (CA21101) supported by COST (European Cooperation in Science and Technology). The Barcelona Supercomputing Centre-MareNostrum (BSC-RES) is acknowledged for providing generous computational resources. EuroHPC Joint Undertaking is also acknowledged for awarding them access to MareNostrum5 at BSC, Spain. The XAFS measurements were performed at the NOTOS and CLAESS beamline at ALBA Synchrotron with the collaboration of ALBA staff. Funding for open access charge: CRUE-Universitat Politecnica de Valencia. J.A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021-031006-I financed support by MCIN/AEI/10.13039/501100011033 and by European Union/NextGenerationEU/ PRTR), and Generalitat Valenciana (CIGE 2022-093) financed by European Union-Next Generation EU, through the Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital. J.H. thanks the Chinese Scholarship Council for doctoral fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Photocatalytic activity of a 2D copper porphyrin metal-organic framework for visible light overall water splitting

  • Uscategui-Linares, Andrés Felipe|||0000-0003-2448-9966
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Szalad, Horatiu
[EN] A 2D copper tetrakis(4-carboxyphenyl)porphyrin metal-organic framework has been prepared and used as a photocatalyst for overall water splitting, measuring under visible light irradiation (lambda > 450 nm) under one sun power conditions a H2 production rate of 120 mu molH2 gcatalyst-1 h-1 that is among the highest ever reported. While the 2D Cu porphyrin MOF undergoes substantial degradation in 3 h upon UV irradiation (320-380 nm) in the presence of air, it appears to be photostable under the conditions of the overall water splitting and visible light exposure, exhibiting similar temporal profiles for H2 and O2 evolution. Photocurrent experiments and band energy measurements indicate that the photocatalytic efficiency derives from an efficient charge separation in the visible region (apparent electron charge extraction efficiency at 540 nm of 0.1%) and adequate alignment of the redox potential of the conduction (-0.59 V vs. NHE) and valence (+1.48 V vs. NHE) bands for water splitting., Financial support from the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033), Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1), and the European Commission (MOF2H2; Grant Agreement 101084131) is gratefully acknowledged. J. A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021-031006-I funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR) and the financial support (PID2022-141099OA-I00 funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Solving the Conundrum of the Influence of Irradiation Power on Photothermal CO&lt, sub&gt, 2&lt, /sub&gt, Hydrogenation

  • Szalad, Horatiu
  • Peng, Yong
  • Gosch, Jonas Werner
  • Baldi, Andrea
  • Askes, Sven H. C.
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Solar photocatalysis appears as a viable approach for the production of value-added chemicals from CO2. However, up to now, there is no information on the influence of the light intensity on the product distribution of CO2 hydrogenation and the modeling of the actual local temperature at the catalytic sites for typical nanoparticulate photocatalysts. Herein, it is shown that for a photothermal catalyst containing a high density of homogeneously distributed Ru nanoparticles, the collective heating prevails, resulting in a homogeneous temperature distribution in the material that should be relatively close to that of the support and that can be measured macroscopically. Moreover, light intensity has a clear influence on product distribution due to the differences in the local temperature, and therefore, attention should be paid to stable operating conditions, temperature, and CO2 conversion that can result in remarkable differences in product selectivity for the same catalyst as a function of light intensity., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB- CO21 funded by MCIN/AEI/10.13039/501100011033), Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union Next GenerationEU PRTR-C17.I1), and European Comission (Flow Photo Chem; Grant Agreement 86253) are gratefully acknowledged. J.A. thanks the Spanish Ministry of Science and Innovation by a Ramon y Cajal research associate contract (RYC2021-031006-I funded by MCIN/AEI/10.13039/501100011033 and by "European Union Next Generation EU/PRTR), and the financial support (PID2022-141099OA-I00 funded by MCIN/AEI/10.13039/501100011033 and by "European Union Next Generation EU/PRTR). S.H.C. Askes gratefully acknowledges the Dutch Research Council (NWO) for the NWO-XS grant (OCENW.XS21.4.167). A.B. gratefully acknowledges the Dutch Research Council (NWO) for the Vidi 680-47-550 grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Co-doped hydroxyapatite as photothermal catalyst for selective CO2 hydrogenation

  • Peng, Yong
  • Szalad, Horatiu
  • Nikacevic, Pavle
  • Gorni, Giulio
  • Simonelli, Laura
  • López, Núria
  • Goberna-Ferrón, Sara|||0000-0002-3306-3791
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] The rational design and in deep understanding of efficient, affordable and stable materials to promote the light-assisted production of fuels and commodity chemicals is very appealing for energy crisis and climate change amelioration. Herein, we have prepared a series of Co-doped hydroxyapatite (HAP) catalysts with different Co content. The materials structure has been widely investigated by XRD, FT-IR, HRTEM, XPS, XAS, as well as computational simulations based on Density Functional Theory (DFT) with PBE functional. At low Co loading, there is a partial substitution of Ca cations in the HAP structure, while higher loadings promote the precipitation of small (similar to 2 nm) Co nanoparticles on the HAP surface. For the optimal Co content, a constant CO rate of 62 mmol center dot g(-1)center dot h(-1) at 1 sun illumination and 400 degrees C, with the material being stable for 90 h. Visible and NIR photons have been determined responsible of the light-assisted activity enhanced. Mechanistic studies based on both experimental and DFT simulations show that H-2 preferentially adsorbs to metallic Co, while CO2 adsorbs to the HAP surface oxygen. Moreover, both direct photo- and plasmon-driven contributions have been separated in order to study their mechanisms independently., Financial support by European Comission (FlowPhotoChem Grant Agreement 862453 and Solar2Chem grant agreement 861151), The Spanish Ministry of Science and Innovation (Severo Ochoa CEX2021-1230-S financed by MCIN/AEI/10.13039/501100011033, PDI2021-126071-OB-C21 financed by MCIN/AEI/10.13039/501100011033 and by FEDER "Una manera de hacer Europa", and PLEC2021-7831 financed by MCIN/AEI/10.13039/501100011033 and by European Union Next-Generation EU/PRTR), and Generalitat Valenciana (Prometeu 2021-038 and MFA-2022-023 financed by European Union-Next Generation EU, through the Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital) are gratefully acknowledged. J. A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021-031006-I) financed by MCIN/AEI/10.13039/501100011033 and by European Union/Next Generation EU/PRTR). P. N. and N. L. thank the Spanish Ministry of Science and Innovation for financial support PID2021-122515OB-I00, and Severo Ochoa Grant MCIN/AEI/10.13039/501100011033 CEX2019-000925-S) and Barcelona Supercomputing Center-MareNostrum (BSC-RES) for providing generaous computational resources.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Natural Sunlight-Driven Photocatalytic Overall Water Splitting with 5.5% Quantum Yield Promoted by Porphyrin-Sensitized Zn Poly(heptazine imide)

  • Szalad, Horatiu
  • García-Muelas, Rodrigo
  • Galushchinski, Alexey
  • Savateev, Oleksandr
  • Antonietti, Markus
  • Uscategui-Linares, Andrés Felipe|||0000-0003-2448-9966
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Meso-tetrakis(4-carboxyphenyl)porphyrin (H4TCPP) has been loaded on a partially exchanged Zn2+ poly(heptazine imide) (PHI), changing the light harvesting properties of the system, without altering the PHI structure. At the optimal loading (20 wt %), the photosensitized (Zn/K)-PHI is able to produce 1.06 mmolH2/g and 0.46 mmolO2/g after 12 h of reaction irradiation of Milli-Q water under visible light by a 100 mW/cm2 white LED. The apparent quantum yield for the overall water splitting reaction was 5.5% at 400 nm and 2% at 700 nm. Outdoor water splitting irradiation with natural sunlight shows the feasibility of the process. The photocatalytic performance of TCPP20%@(Zn/K)-PHI is considerably higher than that of analyzed reference samples such as graphitic carbon nitride, poly(triazine imide), and potassium PHI with H4TCPP photosensitization. These relative photocatalytic activities point out the relevance of the PHI structure and the presence of Zn2+. It is proposed that Zn2+ simultaneously binds PHI and H4TCPP. Transient absorption spectroscopy supports the occurrence of photoinduced electron transfer in which electrons are located at the H4TCPP and holes at the PHI moiety. Transient photocurrent measurements show a higher charge separation efficiency on TCPP20%@-(Zn/K)-PHI compared to (Zn/K)-PHI, and measurement of the frontier orbitals indicates an adequate energy alignment of the HOMO/LUMO levels of TCPP4- with respect to (Zn/K)-PHI. The results show the possibility of developing efficient noble metal-free photocatalytic systems based on PHI dye sensitization., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials program Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1) is acknowledged. J.A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021-031006-I funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR) and for the financial support (PID2022-141099OA-I00 funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR). R.G.M. gratefully acknowledges the generous high-performance computing time provided by CETA-CIEMAT in their Turgalium cluster. H.S. thanks the European ITN Solar2Chem for a postgraduate fellowship. The authors gratefully acknowledge The Max Planck Society for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Systematic screening of transition-metal-doped hydroxyapatite for efficient photocatalytic CO2 reduction

  • Li, Yuting
  • Bahamon, Daniel
  • López, Nuria
  • Vega, Lourdes F.
  • Albero-Sancho, Josep|||0000-0002-4841-7206
[EN] We present the first comprehensive investigation of transition metal -substituted Hydroxyapatite (TM -HAP) materials for photocatalytic CO2 reduction (CO2RR). Density functional theory (DFT) was used to study in a systematic manner the stability of 3d, 4d, 5d transition metal dopants on the HAP (0001) surface, analyzing their stability, activity, and selectivity for photocatalytic CO2RR. DFT results allowed to narrow down the selection to three transition metal elements (Co, Ni, Mo) based on their structural stability, band structure and performance. A selective analysis of product formation for carbon monoxide and formate was made, showing that TM dopants facilitate the initial protonation step in the CO2 reduction by adsorbing H2 molecule on TM atoms and then dissociating it into two hydrogen atoms. The performance of Ni- and Co -HAP towards the reaction activity is consistent with experimental results. Mo-HAP stands as a new and attractive photocatalyst for further investigation, given its excellent predicted performance., We acknowledge the financial support of Khalifa University of Science and Technology, under project RC2-2019-007 (Research and Innovation Center on CO2 and Hydrogen, RICH Center). Yuting Li acknowledges a grant from China Scholarship Council (CSC), which has sponsored the author's PhD study at Khalifa University, as well as an additional travel grant from Khalifa University to support a research stay at ICIQ, where part of this work was performed. Computational resources from the RICH center and the Almesbar HPC at Khalifa University are gratefully acknowledged. We thank P. Nikacevic for providing the initial HAP structures. J.A. thanks the Spanish Ministry of Science and Innovation for the Ramon y Cajal research associate contract (RYC2021-031006-I financed support by MCIN/AEI/10.13039/ 501100011033 and by European Union/NextGenerationEU/PRTR) and the financial support (PID2022-141099OA-I00 funded by MCIN/AEI/ 10.13039/501100011033 and FEDER "Una manera de hacer Europa".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Two-dimensional Co-based porphyrin metal-organic framework as heterogeneous catalyst for the aerobic oxidation of benzylic hydrocarbon

  • Uscategui-Linares, Andrés Felipe|||0000-0003-2448-9966
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Santiago-Portillo, Andrea
  • Dhakshinamoorthy, Amarajothi
  • Parvulescu, Vasile
[EN] The development of heterogeneous catalysts for hydrocarbon oxidation by molecular oxygen as oxidant is an area of increasing interest from academia and chemical industry points of views. Herein, the catalytic activity of two-dimensional (2D) porphyrin metal -organic frameworks (MOFs) constituted by Co 2 + , Cu 2 + or Mn 3 + as transition metal ions coordinated to tetra(4-carboxyphenyl)porphyrin (TCPP) organic ligand as heterogeneous catalysts for the aerobic oxidation of benzylic hydrocarbon oxidation is reported. Selective radical quenching experiments and in -situ Raman measurements reveal the formation of superoxide/hydroperoxide and hydroxyl radicals during the catalytic reaction using Co-CoTCPP., Financial support the Spanish Ministry of Science and Innovation (Severo Ochoa CEX2021-1230-S financed support by MCIN/AEI/10.13039/501100011033) , and Generalitat Valenciana (Prometeu 2021-038 and MFA-2022-023 financed by European Union-Next Generation EU, through the Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital) are gratefully acknowledged. J.A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021-031006-I financed support by MCIN/AEI/10.13039/501100011033 and by European Union/NextGenerationEU/PRTR) . S.N. thanks the support of grant PID2021-123856OBI00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe. A.D. is beneficiary of a grant Maria Zambrano in Universitat Politecnica de Valencia within the framework of the grants for the retraining in the Spanish university system (Spanish Ministry of Universities, financed by the European Union, NextGeneration EU) .r (Severo Ochoa CEX2021-1230-S financed support by MCIN/AEI/10.13039/501100011033) , and Generalitat Valenciana (Prometeu 2021-038 and MFA-2022-023 financed by European Union-Next Gen-eration EU, through the Conselleria de Innovaci on, Universidades, Ciencia y Sociedad Digital) are gratefully acknowledged. J.A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021-031006-I financed support by MCIN/AEI/10.13039/501100011033 and by European Union/NextGenerationEU/PRTR) . S.N. thanks the support of grant PID2021-123856OBI00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe. A.D. is beneficiary of a grant Maria Zambrano in Universitat Politecnica de Valencia within the framework of the grants for the retraining in the Spanish university system (Spanish Ministry of Uni-versities, financed by the European Union, NextGeneration EU) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Heterostructured PHI-PTI/Li+Cl- Carbon Nitrides for Multiple Photocatalytic Applications

  • Galushchinski, Alexey
  • Pulignani, Carolina
  • Szalad, Horatiu
  • Reisner, Erwin
  • Tarakina, Nadezda V.
  • Pelicano, Christian Mark
  • Savatee, Oleksandr
  • Antonietti, Markus
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Two series of novel carbon nitride photocatalysts, Rho-CN ("rhodizonate-doped carbon nitride") and Rho-CN-TC (Rho-CN treated in potassium thiocyanate melt), are synthesized in a multistep fashion via copolymerization of cyanamide with potassium rhodizonate. The formed ionic carbon nitrides are composed of poly(triazine imide) (PTI/Li+Cl-) and potassium poly(heptazine imide) (K-PHI) phases and provide a broad absorption range up to 800 nm. The photocatalysts are characterized by several techniques (including diffuse reflectance ultraviolet-visible, powder X-ray diffraction, Fourier transform infrared, scanning electron microscopy, and electrochemical methods) and studied in a series of photocatalytic reactions, including red light-promoted benzylamine oxidation, dual photoredox/nickel C-N cross-coupling, and hydrogen peroxide evolution. The optimal ratio of rhodizonate dopant in its mixture with cyanamide is found to be 0.5 mol%. The performance of the newly synthesized materials is comparable to the activities of the benchmark catalysts K-PHI and CN-OA-m (defective poly(heptazine imide) doped with oxamide), while not requiring more expensive nitrogen sources for preparation, like 5-aminotetrazole, or multiple oven cycles., This project has received funding from the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement no. 861151 Solar2Chem. The material presented and views expressed here are the responsibility of the authors only. The EU Commission takes no responsibility for any use made of the information set out. J.A.S. also thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021-031006-I). A.G. and C.P. would like to thank Dr. Camilo A. Mesa (Institute of Advanced Materials (INAM), Universitat Jaume I (UJI)) for help with impedance data processing. Michael Born (electric workshop of the MPICI) is acknowledged for his contribution to this project.Open Access funding enabled and organized by Projekt DEAL.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fe and Sn Single-Site-Based Electrodes for High-Current CO2. Reduction in Acid Media and Stable Zn-CO2 Batteries

  • Hu, Jiajun
  • Simonelli, Laura
  • Lopez-Salas, Nieves
  • Goberna-Ferrón, Sara|||0000-0002-3306-3791
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Albero-Sancho, Josep|||0000-0002-4841-7206
[EN] Electrocatalytic CO2 conversion is a promising method for reducing the dependence on fossil fuels and lowering CO2 emissions. However, challenges such as suppression of the competing hydrogen evolution reaction (HER) and long-term stability, especially in acidic media, among others, hinder its industrial application. Herein, Fe and Sn single sites supported on an N-doped carbon support (FSNC) was prepared by direct pyrolysis of selected precursors. XANES and EXAFS measurements confirmed the presence of Fe and Sn single atoms coordinated to N or O atoms in the N-doped carbon. An analogous material synthesized by deposition of Fe and Sn precursors on a previously fabricated N-doped carbon matrix (FS/NC), followed by thermal reduction, rendered Fe-O small clusters and Sn single atoms. FSNC was tested for CO2 reduction, obtaining a CO Faradaic efficiency (FE) of 92%, while the CO FE of FS/NC was 63%. We attributed the differences in selectivity to the interaction between the Fe and Sn single sites, while the Fe-O clusters are inactive for this reaction. Double-layer capacitance (CDL) and electrochemical impedance spectroscopy (EIS) measurements confirmed a larger electrochemically active surface area and lower charge-transfer resistance, respectively, in FSNC. In addition, FSNC demonstrated a high CO FE (90%) under acidic conditions (pH = 2.1), demonstrating that this electrocatalyst can effectively suppress the HER under acidic conditions. Moreover, 5 cm2 electrodes containing FSNC were fabricated, and their stability was tested for 20 h of continuous operation in an electrochemical flow cell at different current densities (50-350 mA/cm2), demonstrating improved stability at high current densities and under acidic conditions. Finally, FSCN-based cathodes were also tested in a Zn-CO2 battery, achieving a maximum power density of 2.54 mW/cm2 at 0.48 V with a current density of 5.2 mA/cm2 and demonstrating outstanding rechargeability and stability upon 50 continuous charge-discharge cycles for 50 h., Financial support was provided by the Spanish Ministry of Science and Innovation (Severo Ochoa CEX2021-1230-S, financed by MCIN/AEI/10.13039/501100011033, and PDI2021-0126071-OB-CO21 and PID2022-141099OA-I00, funded by MCIN/AEI/10.13039/501100011033 and NextGenerationEU/PRTR) and Generalitat Valenciana (Prometeo 2021-083, CIGE 2022-093, and Advanced Materials programme Graphica MFA/2022/023, financed by NextGenerationEU through the Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital). J.A. also thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021-031006-I, funded by MCIN/AEI/10.13039/501100011033 and NextGenerationEU/PRTR). J.H. thanks the Chinese Scholarship Council for a postgraduate scholarship to perform his PhD at Valencia. S.G.-F. thanks the European Union's Horizon 2020 research and innovation program (Marie Sklodowska-Curie grant agreement No. 894270).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A photodetector based on the non-centrosymmetric 2D pseudo-binary chalcogenide MnIn2Se4

  • Serra, Marco
  • Antonatos, Nikolas
  • Lajaunie, Luc
  • Weng, Mouyi
  • Bastonero, Lorenzo
  • Sarkar, Kalyan Jyoti
  • Gusmao, Rui
  • Luxa, Jan
  • Bartoszewicz, Rafal
  • Ziembicki, Jakub
  • Plutnarová, Iva
  • Marzari, Nicola
  • Kudrawiec, Robert
  • Sofer, Zdenek
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Due to their attractive band gap properties and van der Waals structure, 2D binary chalcogenide materials have been widely investigated in the last decade, finding applications in several fields such as catalysis, spintronics, and optoelectronics. Ternary 2D chalcogenide materials are a subject of growing interest in materials science due to their superior chemical tunability which endows tailored properties to the devices prepared thereof. In the family of AIIBIII2XVI4, ordered ZnIn2S4-like based photocatalytic systems have been studied meticulously. In contrast, reports on disordered phases appear to a minor extent. Herein, a photoelectrochemical (PEC) detector based on the pseudo-binary MnIn2Se4 system is presented. A combination of optical measurements and DFT calculations confirmed that the nature of the bandgap in MnIn2Se4 is indirect. Its performance outclasses that of parent compounds, reaching responsivity values of 8.41 mA W-1. The role of the non-centrosymmetric crystal structure is briefly discussed as a possible cause of improved charge separation of the photogenerated charge carriers., Z. S. was supported by the ERC-CZ program (project LL2101) from the Ministry of Education Youth and Sports (MEYS). We acknowledge funding from the European Union through the 2D-PRINTABLE project (GA-101135196). This work was supported by the project "The Energy Conversion and Storage" funded as project no. CZ.02.01.01/00/22_008/0004617 by Programme Johannes Amos Commenius, call Excellent Research. N. A. acknowledges funding from the National Science Centre (NCN) Poland SONATA 19 Grant no. 2023/51/D/ST11/02588 and at Wroclaw University of Science and Technology, and this work was supported by the National Science Centre (NCN) Poland OPUS 23 no. 2022/45/B/ST7/02750. Calculations have been carried out using resources provided by Wroclaw Centre for Networking and Supercomputing. L. L. acknowledges funding from the Spanish Ministerio de Economia y Competitividad, the Ministerio de Ciencia e Innovacion MCIN/AEI/10.13039/501100011033/FEDER UE, and the European Union "NextGenerationEU"/PRTR (PID2022-140370NB-I00, RYC2021-033764-I, CPP2021-008986). The (S)TEM measurements were performed at the National Facility ELECMI ICTS ("Division de Microscopia Electronica", Universidad de Cadiz, DME-UCA). Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1). J. A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021-031006-I financed support by MCIN/AEI/10.13039/501100011033 and by European Union/NextGenerationEU/PRTR). L. B. and N. M. gratefully acknowledge support from the Deutsche Forschungsgemeinschaft (DFG) under Germany's Excellence Strategy (EXC 2077, no. 390741603, University Allowance, University of Bremen) and Lucio Colombi Ciacchi, the host of the "U Bremen ExcellenceChair Program". N. M. acknowledges support by the NCCR MARVEL, a National Centre of Competence in Research, funded by the Swiss National Science Foundation (grant number 205602). K. J. S. was supported by the Johannes Amos Comenius Programme, European Structural and Investment Funds, project CHEMFELLS VI (no. CZ.02.01.01/00/22_010/0008122).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Selective oxidative coupling of amines through light-activated bismuth halide perovskites

  • Lopes, Joana C.
  • Sampaio, Maria J.
  • Silva, Claudia G.
  • Faria, Joaquim L.
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Bismuth halide perovskites have emerged as promising alternatives for sustainable and efficient photocatalysts for light-induced organic transformations. Caesium bismuth halide perovskites (Cs3Bi2(ClxBr1-x)9) with different ratios of chloride and bromide were synthesised using a one-step solution process. These perovskites were then employed as photocatalysts for the photocatalytic oxidative coupling of benzylamine (BZA) to produce N-benzylidenebenzylamine (BZI) under ultraviolet-visible light radiation at ambient conditions. The incorporation of bromide ions into the chloride-based perovskite resulted in a noticeable reduction in the bandgap, leading to an enhancement in the photocatalytic activity. Conversely, the addition of chloride ions within the bromide-based perovskite was found to be beneficial for the material's photostability while simultaneously maintaining its high photocatalytic activity. The optimal compromise between the stability and photocatalytic activity for the BZI production was achieved using Cs3Bi2(Cl0.8Br0.2)9, being attained a total BZA conversion and the maximum BZI production with 100 % of selectivity after 6 hours of irradiation. The efficiency of this photocatalyst was ascribed to the highest current density observed during the photocurrent experiments, which improves the charge carrier mobility of the resulting material., This work was supported by national funds through FCT/MCTES (PIDDAC): LSRE-LCM, UIDB/50020/2020 (DOI: 10.54499/UIDP/50020/2020) and UIDP/50020/2020 (DOI: 10.54499/UIDP/50020/2020); and ALiCE, LA/P/0045/2020 (DOI: 10.54499/LA/P/0045/2020). The authors also thank the project ClimActic (NORTE-01-0145-FEDER-000071), funded by European Regional Development Fund (ERDF) through COMPETE2020 - Programa Operacional Competitividade e Internacionalizacao (POCI) and by national funds (PIDDAC) through FCT/MCTES. H.G. and J. A. thank the financial support from the Spanish Ministry of Science and Innovation (Severo Ochoa CEX2021-1230-S financed by MCIN/AEI/10.13039/501100011033, PDI2021-126071-OB-C21 financed by MCIN/AEI/10.13039/501100011033 and by FEDER "Una manera de hacer Europa", and PLEC2021-7831 financed by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/ PRTRCEX2021-1230-S) and Generalitat Valenciana (Prometeu 2021-038 and MFA-2022-023 financed by European Union-Next Generation EU, through the Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital). J.A. also thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021-031006-I financed by MCIN/AEI/10.13039/501100011033 and by European Union/NextGenerationEU/ PRTR)). JCL acknowledges the PhD research grant from FCT, Ref. 2020.04651.BD. . MJS acknowledges FCT funding under the Scientific Employment Stimulus - Institutional Call (CEECINST/00010/2021).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Polymeric triazine/heptazine imide heterostructures enable photocatalytic O2 reduction to H2O2

  • Szalad, Horatiu
  • Galushchinskiy, Alexey
  • Jianu, Teodor
  • Roddatis, Vladimir
  • Tarakina, NV
  • Savateev, Oleksandr
  • Antonietti, Markus
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Heptazine-based carbon nitrides are a class of transition metal free semiconductors, which are extensively studied in various photocatalytic processes. The localized nature of the excitons, incomplete exciton conversion into the charge-separated state and the recombination of the charge carriers are the factors that limit performance of the pristine heptazine-based carbon nitrides. Herein, we design heterojunctions composed of poly(triazine imide) intercalated by LiCl and poly(heptazine imide) phases. The donor-acceptor character of the heterojunctions improves the charge separation yield. The heterojunction with the optimal composition of the phases shows an apparent quantum yield of H2O2 formation of 14¿% at 365¿nm and 7¿% at 465¿nm, while the H2O2 production rate reaches 7.8¿mol¿L¿1 gphotocatalyst¿1 h¿1 (39¿mmol¿L¿1 h¿1 produced by 5¿mg of photocatalyst) in batch and 15.9¿mol kgphotocatalyst¿1 h¿1 in flow using a packed-bed photoreactor. The heterojunction undergoes photocharging under anaerobic conditions. The charges stored in the material after irradiation enable O2 reduction to H2O2 in the dark with the rate 367 µmol gphotocatalyst¿1 h¿1 (1.8 µmol h¿1 stored in 5¿mg of photocatalyst)., This work was part of the Solar2Chem ITN project funded by the EU. Financial support by the Ministry of Science and Innovation (Severo Ochoa CEX2021 001230-S and RTI2018 89237-CO2 1, both funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021 38) is gratefully acknowledged. This study forms part of the Advanced Materials programme Graphica MFA/2022/023 and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana. J.A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021 031006-I funded by MCIN/AEI/ 10.13039/501100011033 and by European Union NextGenerationEU/ PRTR), and the financial support (PID2022-141099OA-I00 funded by MCIN/AEI/10.13039/501100011033 and, by European Union NextGenerationEU/PRTR). We gratefully acknowledge The Max Planck Society for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Unraveling the Influence of Shell Thickness in Organic Functionalized Cu2O Nanoparticles on C2+ Products Distribution in Electrocatalytic CO2 Reduction

  • Hu, Jiajun
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Cu-based electrocatalysts exhibit enormous potential for electrochemical CO2 conversion to added-value products. However, high selectivity, specially toward C2+ products, remains a critical challenge for its implementation in commercial applications. Herein, the study reports the preparation of a series of electrocatalysts based on octadecyl amine (ODA) coated Cu2O nanoparticles (NPs). HRTEM images show ODA coatings with thickness from 1.2 to 4 nm. DFT calculations predict that at low surface coverage, ODA tends to lay on the Cu2O surface, leaving hydrophilic regions. Oppositely, at high surface coverage, the ODA molecules are densely packed, being detrimental for both mass and charge transfer. These changes in ODA molecular arrangement explain differences in product selectivity. In situ Raman spectroscopy has revealed that the optimum ODA thickness contributes to the stabilization of key intermediates in the formation of C2+ products, especially ethanol. Electrochemical impedance spectroscopy and pulse voltammetry measurements confirm that the thicker ODA shells increase charge transfer resistance, while the lowest ODA content promotes faster intermediate desorption rates. At the optimum thickness, the intermediates desorption rates are the slowest, in agreement with the maximum concentration of intermediates observed by in situ Raman spectroscopy, thereby resulting in a Faradaic efficiency to ethanol and ethylene over 73%., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/ 10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1). Participation in the EU project ECO2Fuel is gratefully acknowledged. J.A. thanks the Spanish Ministry of Science and Innovation for a Ramony Cajal research associate contract (RYC2021-031006-I financed support by MCIN/AEI/10.13039/501100011033 and by European Union/NextGenerationEU/ PRTR), and Generalitat Valenciana (CIGE 2022-093) financed by European Union-Next Generation EU, through the Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital. J.H. thanks the Chinese Scholarship Council for doctoral fellowship. S.O. acknowledges the National Science Centre, Poland (grant no. UMO/2020/39/I/ST4/01446) and the "Excellence Initiative - Research University" (IDUB) Program, Action I.3.3 - "Establishment of the Institute for Advanced Studies (IAS)" for funding (grant no. UW/IDUB/2020/25). The computation was carried out with the support of the Interdisciplinary Center for Mathematical and Computational Modeling at the University of Warsaw (ICM UW) under grants no. G83-28 and GB80-24.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental investigation of photo-thermal catalytic reactor for the reverse water gas shift reaction under concentrated irradiation

  • Brust, David
  • Wullenkord, Michael
  • Sattler, Christian
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Albero-Sancho, Josep|||0000-0002-4841-7206
[EN] An upscaled photo-thermal catalytic reactor for the heterogeneously catalysed reverse Water Gas Shift (rWGS) reaction is tested under simulated concentrated irradiation. The reactor is equipped with an aperture of 144 cm2 area covered by a quartz window, where it receives irradiation flux densities of up to 80 kW/m2 corresponding to an irradiation power input of 1 kW thereby directly irradiating a RuO2 based photo-thermal catalyst that is deposited on a porous support. The system was operated under simulated concentrated sunlight for a total of 45.5 h with 35.4 h of chemical operation. A peak CO production rate of 1.6 mol/h was achieved with an average light concentration factor of 80 in the centre of the catalyst layer. This corresponds to a solar-to-chemical efficiency - defined by the ratio of the product of molar CO production rate and reaction enthalpy for the rWGS reaction and the irradiation power input - of 1.69 %. A calculation approach to determine the catalyst surface temperature under irradiation was introduced and utilised for performance analysis leading to the discussion of design modifications and operating strategies towards performance enhancement., The authors would like to thank the DLR team for their support and for the realisation of optics (C. Willsch, G. Dibowski) and test setup (M. Kloft, C. Spenke) and data acquisition and control (K. E ss er, F. Pierno) . Also, the authors acknowledge funding from the European Union's Horizon 2020 Research and Innovation Programme under grant agreement No 862453. The material presented and views expressed here are the responsibility of the authors only. The EU Commission takes no responsibility for any use made of the information set out.The help on part of PCM-OTP CNRS PROMES in performing the optothermal spectral measurements (C. Escape) is appreciated. This work was supported by the French "Investments for the future" programme managed by the National Agency for Research under contract ANR-10- EQPX-49-SOCRATE.J.A. thanks the Spanish Ministry of Science and Innovation for the Ramon y Cajal research associate contract (RYC2021-031006-I financed support by MCIN/AEI/10.13039/501100011033 and by European Union/NextGenerationEU/PRTR) and the financial support (PID2022-141099OA-I00 funded by MCIN/AEI/10.13039/501100011033 and FEDER "Una manera de hacer Europa".
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Co-doped hydroxyapatite as photothermal catalyst for selective CO2 hydrogenation

  • Peng, Yong
  • Szalad, Horatiu
  • Nikacevic, Pavle
  • Gorni, Giulio
  • Goberna-Ferrón, Sara
  • Simonelli, Laura
  • Albero, J.
  • López, Nuria
  • García Gómez, Hermenegildo
The rational design and in deep understanding of efficient, affordable and stable materials to promote the light-assisted production of fuels and commodity chemicals is very appealing for energy crisis and climate change amelioration. Herein, we have prepared a series of Co-doped hydroxyapatite (HAP) catalysts with different Co content. The materials structure has been widely investigated by XRD, FT-IR, HRTEM, XPS, XAS, as well as computational simulations based on Density Functional Theory (DFT) with PBE functional. At low Co loading, there is a partial substitution of Ca cations in the HAP structure, while higher loadings promote the precipitation of small (∼ 2 nm) Co nanoparticles on the HAP surface. For the optimal Co content, a constant CO rate of 62 mmol·g·h at 1 sun illumination and 400 °C, with the material being stable for 90 h. Visible and NIR photons have been determined responsible of the light-assisted activity enhanced. Mechanistic studies based on both experimental and DFT simulations show that H preferentially adsorbs to metallic Co, while CO adsorbs to the HAP surface oxygen. Moreover, both direct photo- and plasmon-driven contributions have been separated in order to study their mechanisms independently., Financial support by European Comission (FlowPhotoChem Grant Agreement 862453 and Solar2Chem grant agreement 861151), The Spanish Ministry of Science and Innovation (Severo Ochoa CEX2021-1230-S financed by MCIN/AEI/10.13039/501100011033, PDI2021-126071-OB-C21 financed by MCIN/AEI/10.13039/501100011033 and by FEDER "Una manera de hacer Europa", and PLEC2021-7831 financed by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR), and Generalitat Valenciana (Prometeu 2021-038 and MFA-2022-023 financed by European Union-Next Generation EU, through the Conselleria de Innovación, Universidades, Ciencia y Sociedad Digital) are gratefully acknowledged. J. A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021-031006-I) financed by MCIN/AEI/10.13039/501100011033 and by European Union/NextGenerationEU/ PRTR). P. N. and N. L. thank the Spanish Ministry of Science and Innovation for financial support PID2021-122515OB-I00, and Severo Ochoa Grant MCIN/AEI/10.13039/501100011033 CEX2019-000925-S) and Barcelona Supercomputing Center-MareNostrum (BSC-RES) for providing generaous computational resources., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-1230-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000925-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Light-assistance in nitrogen fixation to ammonia by highly dispersed Cs-promoted Ru clusters supported on ZrO2

  • Peng, Y.
  • Melillo, A.
  • Shi, Run
  • Forneli, Amparo
  • Franconetti, Antonio
  • Albero, J.
  • García Gómez, Hermenegildo
Light-assisted N fixation to NH under mild conditions is attracting massive attention to circumvent energy crisis and global warming. Herein, highly dispersed Cs-decorated Ru sub-nanometric clusters supported on ZrO NPs have been prepared by means of MOF-templated transformation method. The obtained catalyst exhibited N hydrogenation activity of 1.6 mmol g h in the dark (350 °C, 0.1 MPa). Remarkably this value increased by over 300 %, reaching 5.1 mmol g h (204 mmol g h) under 1 Sun power illumination (1080 W/m) The influence of the incident light wavelength has been evaluated, revealing 81 % and 213 % enhancement in the NIR and visible region, respectively. DFT calculations were carried out to understand the static adsorption states of Ru sub-nanoclusters. Mechanistic studies have confirmed the co-existence of a photothermal and a nonthermal-hot electron mechanism. XPS, PXRD and FTIR analysis have determined that the Cs species block surface Zr acidity, increasing the basicity of the ZrO support. Moreover, partially reduced Cs (0 <δ < 1) species surrounding the Ru active sites are donating electron density to the adjacent Ru sites, favoring N adsorption and subsequent activation. Finally, this photocatalyst has shown an extended stability for 100 h irradiation under continuous flow., Financial support by the Spanish Ministry of Science and Innovation (PDI2021–126071-OB-C21 financed support by MCIN/AEI/10.13039/501100011033 and by FEDER "Una manera de hacer Europa"), and Severo Ochoa (CEX2021–1230-S financed support by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged. Generalitat Valenciana (Prometeu 2021–038 and MFA-2022–023 financed by European Union-Next Generation EU, through the Conselleria de Innovación, Universidades, Ciencia y Sociedad Digital) and European Union Horizon 2020 Research and Innovation Programme (FlowPhotoChem Grant Agreement 862453) are also gratefully acknowledged. J.A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021–031006-I financed support by MCIN/AEI/10.13039/501100011033 and by European Union/NextGenerationEU/ PRTR)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021–1230-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unraveling the Optimal Cerium Content for Boosting the Photoresponse Activity of Mixed-Metal Zr/Ce-Based Metal-Organic Frameworks through a Photodynamic and Photocurrent Correlation: Implications on Water Splitting Efficiency

  • Bhattacharyya, A.
  • Gutierrez, Mario
  • Cohen, Boiko
  • Szalad, Horatiu
  • Albero, J.
  • García Gómez, Hermenegildo
  • Douhal, Abderrazzak
Mixed-metal-organic frameworks (MMOFs) have emerged as promising photocatalyst candidates in multiple reactions. For instance, the doping of Zr-UiO-type MOFs with Ce atoms increases their photoactivity owing to a better overlap between the organic linker and Ce orbitals. However, it is not clear which is the ideal content of Ce to reach the optimal photocatalytic performance. Herein, a series of MMOFs isostructural to UiO-66 and with napthalene-2,6-dicarboxylate (NDC) as a linker were synthesized and characterized. The Ce content was varied from 0 to 100% and their corresponding structural, chemical, photodynamic, and photoresponse properties were investigated. Powder X-ray diffraction shows that when the content of Ce is 12% onward, in addition to the UiO-type structure, a second crystalline structure is cosynthesized (NDC-Ce). Steady-state and femtosecond (fs) to millisecond (ms) spectroscopy studies reveal the existence of two competing processes: a linker excimer formation and an ultrafast ligand-to-cluster charge transfer (LCCT) phenomenon from the organic linker to Zr/Ce metal clusters. The ultrafast (fs-regime) LCCT process leads to the formation of long-lived charge-separated states, which are more efficiently photoproduced when the content of Ce reaches 9%, suggesting that the related material would show the highest photoactivity. Photoaction spectroscopic measurements corroborate that the sample with 9% of Ce exhibits the maximum photocatalytic efficiency, which is reflected in a 20% increment in overall water splitting efficiency compared with the monometallic Zr-based MOF. The current study demonstrates the relationship between the photodynamical properties of the MMOFs and their photocatalytic performance, providing new findings and opening new ways for improving the design of new MOFs with enhanced photocatalytic activities., A.B. acknowledges Marie Skłodowska-Curie Actions (Project H2020-MSCA-IF-2020-101032472) for the postdoctoral fellowship. This research was also supported by grants: PID2020-116519RB-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union (EU); SBPLY/19/180501/000212 and SBPLY/21/180501/000108 funded by JCCM and by the EU through “Fondo Europeo de Desarollo Regional” (FEDER). M.G. also thanks the EU for financial support through Fondo Social Europeo Plus (FSE+). Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa Center of Excellence CEX2021-001230-S and RTI2018-89237-CO2-1, both funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021-38) is gratefully acknowledged. H.S. thanks the ITN Marie-Skłodowska-Curie Solar2Chem (grant agreement No. 861151) for a postgraduate research contract. J.A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021–031006-I financed support by MCIN/AEI/10.13039/501100011033 and by European Union/NextGenerationEU/ PRTR). We thank the Servicio de Instrumentación (IRICA, UCLM) for the PXRD and SEM measurements and the Servicio Interdepartamental de Investigación (SIdI) of the Universidad Autónoma de Madrid (UAM) for the elemental analysis of the studied MOFs., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001230-S)., Peer reviewed