Pasar al contenido principal

HIDRÓGENO: ENVASES A PRESIÓN EN ACERO INOXIDABLE - HEPA

CPP2021-008986

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Transferencia de Conocimiento
Convocatoria Proyectos en Colaboración Público-Privada
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario ACERINOX EUROPA S.A.U.

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A photodetector based on the non-centrosymmetric 2D pseudo-binary chalcogenide MnIn2Se4

  • Serra, Marco
  • Antonatos, Nikolas
  • Lajaunie, Luc
  • Weng, Mouyi
  • Bastonero, Lorenzo
  • Sarkar, Kalyan Jyoti
  • Gusmao, Rui
  • Luxa, Jan
  • Bartoszewicz, Rafal
  • Ziembicki, Jakub
  • Plutnarová, Iva
  • Marzari, Nicola
  • Kudrawiec, Robert
  • Sofer, Zdenek
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Due to their attractive band gap properties and van der Waals structure, 2D binary chalcogenide materials have been widely investigated in the last decade, finding applications in several fields such as catalysis, spintronics, and optoelectronics. Ternary 2D chalcogenide materials are a subject of growing interest in materials science due to their superior chemical tunability which endows tailored properties to the devices prepared thereof. In the family of AIIBIII2XVI4, ordered ZnIn2S4-like based photocatalytic systems have been studied meticulously. In contrast, reports on disordered phases appear to a minor extent. Herein, a photoelectrochemical (PEC) detector based on the pseudo-binary MnIn2Se4 system is presented. A combination of optical measurements and DFT calculations confirmed that the nature of the bandgap in MnIn2Se4 is indirect. Its performance outclasses that of parent compounds, reaching responsivity values of 8.41 mA W-1. The role of the non-centrosymmetric crystal structure is briefly discussed as a possible cause of improved charge separation of the photogenerated charge carriers., Z. S. was supported by the ERC-CZ program (project LL2101) from the Ministry of Education Youth and Sports (MEYS). We acknowledge funding from the European Union through the 2D-PRINTABLE project (GA-101135196). This work was supported by the project "The Energy Conversion and Storage" funded as project no. CZ.02.01.01/00/22_008/0004617 by Programme Johannes Amos Commenius, call Excellent Research. N. A. acknowledges funding from the National Science Centre (NCN) Poland SONATA 19 Grant no. 2023/51/D/ST11/02588 and at Wroclaw University of Science and Technology, and this work was supported by the National Science Centre (NCN) Poland OPUS 23 no. 2022/45/B/ST7/02750. Calculations have been carried out using resources provided by Wroclaw Centre for Networking and Supercomputing. L. L. acknowledges funding from the Spanish Ministerio de Economia y Competitividad, the Ministerio de Ciencia e Innovacion MCIN/AEI/10.13039/501100011033/FEDER UE, and the European Union "NextGenerationEU"/PRTR (PID2022-140370NB-I00, RYC2021-033764-I, CPP2021-008986). The (S)TEM measurements were performed at the National Facility ELECMI ICTS ("Division de Microscopia Electronica", Universidad de Cadiz, DME-UCA). Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1). J. A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021-031006-I financed support by MCIN/AEI/10.13039/501100011033 and by European Union/NextGenerationEU/PRTR). L. B. and N. M. gratefully acknowledge support from the Deutsche Forschungsgemeinschaft (DFG) under Germany's Excellence Strategy (EXC 2077, no. 390741603, University Allowance, University of Bremen) and Lucio Colombi Ciacchi, the host of the "U Bremen ExcellenceChair Program". N. M. acknowledges support by the NCCR MARVEL, a National Centre of Competence in Research, funded by the Swiss National Science Foundation (grant number 205602). K. J. S. was supported by the Johannes Amos Comenius Programme, European Structural and Investment Funds, project CHEMFELLS VI (no. CZ.02.01.01/00/22_010/0008122).
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

A high-performance “fueled” photodetector based on few-layered 2D ternary chalcogenide NiGa2S4

  • Serra, Marco
  • Antonatos, Nikolas
  • Luxa, Jan
  • Lajaunie, Luc Cyrille Jacques
  • Albero, Josep
  • Sabik, Agata
  • Linhart, Wojciech M.
  • García, Hermenegildo
  • Kudrawiec, Robert
  • Sedmidubský, David
  • Sofer, Zdenek
Few-layered binary 2D transition metal chalcogenides have been comprehensively employed in photodetector systems thanks to their intrinsic band gap structure and a high in-plane charge carrier mobility. Their rich chemistry is further broadened when considering ternary 2D chalcogenide materials, giving the possibility to prepare isomorphic materials characterized by various metal distributions within the framework of a crystal structure. Whereas the “inverse” A(τ)B(Ω)(τ)2X4 hexagonal structures (e.g. ZnIn2S4) have been widely studied in photocatalysis, “normal” AII(Ω) BIII(τ)2XVI4 phases have not been considered so far. In this study, a NiGa2S4 photodetector has been prepared by drop-casting the exfoliated crystals onto ITO glass. Their photoresponse has been analyzed either in the absence or in the presence of an electron donor species (EtOH) in the electrolyte solution. Ethanol acts as a fuel in the PEC photodetector system boosting their performance by a factor of ∼x49 in terms of the responsivity at a given wavelength. Moreover, the spectral response is expanded from blue to far IR wavelengths, reaching responsivity values from 48 to 7 mA W−1. The dynamics of photogenerated electrons and holes has been studied using laser flash photolysis. The stability of the “fueled” PEC photodetector has been evaluated through long-term tests which have shown a stable response over extended periods. It is anticipated that the present work can provide fundamental insight into the field of PEC semiconductor-based photodetectors, offering an extendable strategy to engineer high-performance PEC devices., 11 páginas
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Combining low-loss EELS experiments with machine learning-based algorithms to automate the phases separation imaging in industrial duplex stainless steels

  • Castro Riglos, V.
  • Amaya Dolores, Beatriz
  • Ramasubramaniam, A.
  • González Souto, Lorena
  • Sanchez, R.
  • Botana Pedemonte, Francisco Javier
  • Almagro, J.F.
  • Calvino Gámez, José Juan
  • Lajaunie, Luc Cyrille Jacques
At present, transmission electron microscopy is regarded as the main option when dealing with phase characterization for materials at a nanometric scale. The development and improvement of complementary techniques such as energy-dispersive X-ray spectroscopy (EDS), electron energy loss spectroscopy (EELS), imaging detectors and associated computational methods provide a huge variety of choices to determine the composition and crystal structure at any region of a specimen. Despite all these advancements, phase identification for some specific materials having phases with similar structure or similar composition might still be a difficult procedure to perform. To overcome this difficulty, a new method is proposed which combines the acquisition of low-loss EELS spectra with a subsequent analysis driven by machine learning based algorithms (clustering). In the present research, this new approach is applied to a set of industrial duplex stainless steels having different compositions and it is contrasted to other characterization alternatives. As opposed to the other options, this method proved to be effective, reliable and time-saving., Ministerio de Ciencia e Innovación (Spain) Ministerio de Economía y Competitividad (Spain) European Commission (European Union) Universidad de Cádiz (Spain), 8 páginas
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Electrochemical Decalcification-Exfoliation of Two-Dimensional Siligene, SixGey: Material Characterization and Perspectives for Lithium-Ion Storage

  • Kovalska, Evgeniya
  • Wu, Bing
  • Liao, Liping
  • Mazanek, Vlastimil
  • Luxa, Jan
  • Marek, Ivo
  • Lajaunie, Luc Cyrille Jacques
  • Sofer, Zdeněk
A two-dimensional (2D) silicene-germanene alloy, siligene (SixGey), a single-phase material, has attracted increased attention due to its two-elemental low-buckled composition and unique physics and chemistry. This 2D material has the potential to address the challenges caused by low electrical conductivity and the environmental instability of corresponding monolayers. Yet, the siligene structure was studied in theory, demonstrating the material’s great electrochemical potential for energy storage applications. The synthesis of free-standing siligene remains challenging and therefore hinders the research and its application. Herein we demonstrate nonaqueous electrochemical exfoliation of a few-layer siligene from a Ca1.0Si1.0Ge1.0 Zintl phase precursor. The procedure was conducted in an oxygen-free environment applying a −3.8 V potential. The obtained siligene exhibits a high quality, high uniformity, and excellent crystallinity; the individual flake is within the micrometer lateral size. The 2D SixGey was further explored as an anode material for lithium-ion storage. Two types of anode have been fabricated and integrated into lithium-ion battery cells, namely, (1) siligene-graphene oxide sponges and (2) siligene-multiwalled carbon nanotubes. The as-fabricated batteries both with/without siligene exhibit similar behavior; however there is an increase in the electrochemical characteristics of SiGe-integrated batteries by 10%. The corresponding batteries exhibit a 1145.0 mAh·g-1 specific capacity at 0.1 A·g-1. The SiGe-integrated batteries demonstrate a very low polarization, confirmed by their good stability after 50 working cycles and a decrease in the solid electrolyte interphase level that occurs after the first discharge/charge cycle. We anticipate the growing potential of emerging two-component 2D materials and their great promise for energy storage and beyond., 10 páginas
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

AlN interlayer-induced reduction of dislocation density in the AlGaN epilayer

  • Tobaldi, David M.
  • Lajaunie, Luc Cyrille Jacques
  • Cretì, A.
  • Cuscunà, M.
  • Tarantini, I.
  • Esposito, M.
  • Balestra, G.
  • Lomascolo, M.
  • Passaseo, A.
  • Tasco, V.
The emerging ultrawide-bandgap AlGaN alloy system holds promise for the development of advanced materials in the next generation of power semiconductor and UV optoelectronic devices. Within this context, heterostructures based on III-nitrides are very popular in view of their applications as electronic and optoelectronic components. AlGaN-based deep UV emitters are gaining visibility due to their disinfection capabilities. Likewise, high electron mobility transistors are attracting increasing attention owing to their superior electron transport which yields high-speed and high-power applications. These devices are conventionally made of AlGaN/GaN heterostructures grown on foreign substrates. However, structural defects, including stress induced by a mismatch in unit cell parameters and the presence of dislocations, can not only decrease the efficiency of the light emitters (by facilitating the non-radiative recombination of electron-hole pairs), but also impede electron mobility within the two-dimensional electron gas at the AlGaN/GaN interface. Therefore, the significance of obtaining high-quality AlGaN layers becomes evident. Including a thin AlN interlayer between the GaN buffer layer and AlGaN is a possible answer to address these drawbacks. Not only do we show that a thin AlN layer, approximately ≤3 nm in thickness, between the GaN buffer and AlGaN layers, is effective in decreasing the dislocation densities in the AlGaN layer by around 30%, but also this is responsible for an increase in the electron mobility (approximately 33%) compared to a classical AlGaN/GaN heterostructure. Additionally, the resulting heterostructure exhibits better optical quality, with a 7-fold increase in intensity as well as a 20% reduction in full-width at half-maximum in the AlGaN emission.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

A photodetector based on the non-centrosymmetric 2D pseudo-binary chalcogenide MnIn2Se4

  • Serra, M.
  • Antonatos, Nikolas
  • Lajaunie, Luc Cyrille Jacques
  • Albero, Josep
  • Garcia, H.
  • Weng, M.
  • Bastonero, L.
  • Sarkar, K. J.
  • Gusmão, R.
  • Luxa, Jan
  • Bartoszewicz, R.
  • Ziembicki, J.
  • Plutnarová, I.
  • Marzari, N.
  • Kudrawiec, R.
  • Sofer, Z.
Due to their attractive band gap properties and van der Waals structure, 2D binary chalcogenide materials have been widely investigated in the last decade, finding applications in several fields such as catalysis, spintronics, and optoelectronics. Ternary 2D chalcogenide materials are a subject of growing interest in materials science due to their superior chemical tunability which endows tailored properties to the devices prepared thereof. In the family of AIIBIII2XVI4, ordered ZnIn2S4-like based photocatalytic systems have been studied meticulously. In contrast, reports on disordered phases appear to a minor extent. Herein, a photoelectrochemical (PEC) detector based on the pseudo-binary MnIn2Se4 system is presented. A combination of optical measurements and DFT calculations confirmed that the nature of the bandgap in MnIn2Se4 is indirect. Its performance outclasses that of parent compounds, reaching responsivity values of 8.41 mA W−1. The role of the non-centrosymmetric crystal structure is briefly discussed as a possible cause of improved charge separation of the photogenerated charge carriers.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

On the likely origin of the Gold Dust Defect in the production line of industrial ferritic stainless steel

  • Amaya Dolores, Beatriz
  • Núñez Galindo, Andrés
  • Calvino Gámez, José Juan
  • Almagro, Juan Francisco
  • Lajaunie, Luc Cyrille Jacques
The “Gold Dust Defect” that sometimes appears on the surface of the AISI 430 ferritic stainless steel has been related to an improper recrystallization of the material. Hot-rolling, a decisive step in the production process, seems the step where this defect is induced and temperature during this treatment plays a key role. To trace back the origin of this defect, the microstructural evolution of a sample of an AISI 430 was monitored at the different stages in the production process of the steel. In particular, a detailed study combining electron backscatter diffraction with other techniques, such as optical microscopy and scanning electron microscopy has been performed. The whole set of results evidences that after hot-rolling and subsequent annealing, the material contains a large amount of martensite in the center of the cross-section due to a fast cooling of the austenite originated during rolling. In addition, the surface shows a top-layer made up by unrecrystallized subgrains separated from the matrix by an accumulation of chromium carbides. After pickling, the top-layer of subgrains semi-detaches from the surface forming flakes which cannot recrystallize. Most of these flakes do not peel off during the subsequent stages but survive until the end of the production process, forming Gold Dust Defect flakes.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

TiO2 surface hybridisation with Ag and CuO for solar-assisted environmental remediation and sustainable energy applications

  • Dvoranová, D.
  • Koci, Kamila
  • Lajaunie, Luc
  • Edelmannová, Miroslava Filip
  • Seabra, Maria P.
  • Brezová, V.
  • Arenal, Raúl
  • Labrincha, J. A.
  • Tobaldi, David Maria
Industrialisation has led to unprecedented levels of outdoor air pollution, posing a significant health risk to human beings. Consequently, there is an urgent need to replace fossil fuels with sustainable energy sources, thereby mitigating these risks and providing a safer outdoor and indoor environment. Titanium dioxide is a versatile transition metal oxide with applications ranging from energy conversion to environmental remediation. However, it faces limitations, particularly in its absorption spectrum and charge separation efficiency, and enhancing these properties remains a significant challenge. In this research work, we have decorated the surface of TiO2 hybridising it with noble-metal and/or noble-metal oxides (Ag and/or CuO) to improve the photocatalytic performances (monitoring the removal of nitrogen oxides and benzene, and hydrogen generation from water splitting) under simulated solar-light irradiation. Our results showed that titania modified with an Ag : Cu molar ratio equal to 1 : 1, not only exhibited the most promising performance in terms of nitrogen oxides and benzene removal, it was the optimum amount for the light-induced generation of hydrogen from water splitting., This work was partly supported by the Italian Ministry of Research (MUR) in the framework of the National Recovery and Resilience Plan (NRRP), funded by the European Union – NextGenerationEU, M4C2, within the NRRP project NFFA-DI, CUP B53C22004310006, IR0000015. “I-PHOQS” Grant (CUP B53C22001750006) and under the complementary actions to the NRRP, “Fit4MedRob” Grant (PNC0000007, CUP B53C22006960001) and “ANTHEM” Grant (PNC0000003, CUP B53C22006710001), funded by NextGenerationEU. The STEM measurements were performed in the Laboratorio de Microscopias Avanzadas (LMA) at the Universidad de Zaragoza (Spain). Raul Arenal gratefully acknowledges the support from the Spanish Ministry of Science, Innovation and Universities (MICIU, PID2019-104739GB-100/AEI/10.13039/501100011033), the ′Severo Ochoa’ Programme for Centres of Excellence in R&D of the MICIU (CEX2023-001286-S MICIU/AEI /10.13039/501100011033), and from the Gobierno de Aragón (DGA) under the project E13-2R. Luc Lajaunie acknowledges funding the from the Spanish Ministerio de Economía y Competitividad, the Ministerio de Ciencia e Innovación (MCIN/AEI/10.13039/501100011033/FEDER UE), and the European Union “NextGenerationEU”/PRTR (PID2022-140370NB-I00, RYC2021-033764-I, CPP2021-008986). The authors also acknowledge the support by European Union under the REFRESH – Research Excellence for Region Sustainability and High-tech Industries project number, CZ.10.03.01/00/22_003/0000048 via the Operational Programme Just Transition and by Large Research Infrastructure ENREGAT (project No. LM2023056). The study was also financially supported by the Slovak Research and Development Agency under the contract Nr. APVV-21-0039 and Scientific Grant Agency of the Slovak Republic (VEGA Project 1/0422/24). We are particularly obliged to Miss Dafne Maria Glaglanon for proof-editing the English of the manuscript., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Open Access publishing facilitated by Consiglio Nazionale delle Ricerche, as part of the Wiley - CRUI-CARE agreement., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

2D Co-Mo-Hydroxide-Based Multifunctional Material for the Development of H2-Based Clean Energy Technologies

  • Muñoz-Gil, D.
  • Castillo-Blas, Celia
  • Feler, D.K.
  • Gómez-Recio, I.
  • Tinoco, M.
  • Querejeta-Fernández, A.
  • González-Prieto, R.
  • Gándara Barragán, Felipe
  • Silva, Romualdo S.
  • Ferrer, P.
  • Prieto, Carlos
  • Lajaunie, L.
  • Martínez, José L.
  • Ruiz-González, M.L.
  • González-Calbet, J.M.
Layered double hydroxides (LDH) based on transition metals are highly flexible in tailoring their dimensionality, lattice, and electronic structures, making them promising candidates as multifunctional 2D materials for the development of clean energy technologies and boosting the use of hydrogen as an energy vector. In this paper, strategic anion substitution in cobalt LDH is an appealing strategy to produce a material with two-fold functionality, electrochemical and magnetocaloric response, offering a sustainable alternative to existing electrocatalysts and cryogenic refrigerants. It is unambiguously demonstrated that (poly)oxomolybdate-based specimens interleave in Co LDH nanosheets up to a Co:Mo = 1:0.4 ratio, leading to an interstratified material. This intercalation greatly benefits the kinetics of the oxygen evolution reaction for H2 production, boosting the catalytic sites due to the expansion of the interlayer space, induced by the bulky molybdates which also partially modify the Co oxidation state of αCo(OH)2 nanolayers, favoring charge transfer. In parallel, the interleaved Mo species strengthen superexchange interactions compared with pristine α-Co(OH)2, effectively adjusting the operating temperature toward the liquid hydrogen range (2030 K). This specific temperature range allows to fill a critical gap in magnetocaloric materials, as few systems can simultaneously achieve both large magnetic entropy changes and structural stability. © 2025 The Author(s). Advanced Materials published by Wiley-VCH GmbH., Comunidad de Madrid. Grant Number: PR47/21 MAD2D-CM PRTR-CM (CM) UCM6 Spanish Ministry for Science, Innovation and Universities. Grant Number: MICIU/AEI/10.13039/ 501 100 011 033 NextGenerationEU/PRTR and ERDF. Grant Numbers: PID2021-122477OB- I00, PID2021-123287OB-I00, TED2021-129254B−C21, TED2021-129254B−C22 Green Hydrogen Production with Next Generation Polymeric Electrolyzers. Grant Number: TED2022-131033B-100 Ministerio de Ciencia e Innovación, la Agencia Estatal de Investigaci”ón. Grant Number: MCIN/AEI/10.13039/501 100 011 033/FEDER UE European Union “NextGenerationEU”/PRTR. Grant Numbers: PID2022-140370NB-I00, RYC2021-033764-I, CPP2021-008986, CNS2024-154587 Comunidad de Madrid for an Atracción de Talento César Nombela. Grant Number: 2024-T1/TEC-31450 Harwell XPS facility. Grant Number: SI40403-1, Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

TiO<sub>2</sub> surface hybridisation with Ag and CuO for solar-assisted environmental remediation and sustainable energy applications

  • Dvoranová, D.
  • Koci, K.
  • Lajaunie, L.
  • Edelmannova, M. F.
  • Seabra, M. P.
  • Brezová, V.
  • Arenal, R.
  • Labrincha, J. A.
  • Tobaldi, D. M.
Industrialisation has led to unprecedented levels of outdoor air pollution, posing a significant health risk to human beings. Consequently, there is an urgent need to replace fossil fuels with sustainable energy sources, thereby mitigating these risks and providing a safer outdoor and indoor environment. Titanium dioxide is a versatile transition metal oxide with applications ranging from energy conversion to environmental remediation. However, it faces limitations, particularly in its absorption spectrum and charge separation efficiency, and enhancing these properties remains a significant challenge. In this research work, we have decorated the surface of TiO2 hybridising it with noble‐metal and/or noble‐metal oxides (Ag and/or CuO) to improve the photocatalytic performances (monitoring the removal of nitrogen oxides and benzene, and hydrogen generation from water splitting) under simulated solar‐light irradiation. Our results showed that titania modified with an Ag : Cu molar ratio equal to 1 : 1, not only exhibited the most promising performance in terms of nitrogen oxides and benzene removal, it was the optimum amount for the light‐induced generation of hydrogen from water splitting.