Pasar al contenido principal

MATERIALES PARA APLICACIONES EN ENERGIA: PNICTUROS, CALCOGENUROS, OXIDOS Y HALUROS

PID2021-122477OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 31
Encontrada(s) 1 página(s)

Docta Complutense
Publicación Artículo científico (JournalArticle)

Unveiling the structure–magnetism interplay in the ferrimagnetic pyrochlore Gd2CrSbO7 with significant cryo–magnetocaloric performance

  • Silva, R. S.
  • Rodrigues, J. E.
  • Santos, C.
  • Sahle, Ch
  • Serrano-Sánchez, F.
  • Andersen, H. L.
  • Gainza, J.
  • Skorynina, A.
  • Biskup Zaja, Nevenko
  • Nemes, Norbert Marcel
  • Passamani, E. C.
  • Martínez, J. L.
  • Ferreira, N. S.
  • Alonso, J. A.
Magnetic refrigeration is a promising and efficient cooling technology that uses the magnetocaloric effect (MCE), requiring particular materials with low heat capacity, low ordering temperature, and large magnetic moments for high performance. Here we report on Gd2CrSbO7, a mixed B-site pyrochlore oxide that exhibits a significant cryogenic MCE, driven by intricate 4f-3 d exchange interactions. Our combined experimental and theoretical investigation reveals that Gd2CrSbO7 crystallizes in a cubic pyrochlore structure (Fd3m) with ferrimagnetic (FiM) ordering, uniquely hosting a Griffiths-like phase and a Schottky anomaly arising from competing Cr-Cr short-range interactions and Gd crystal field effects. X-ray Raman spectroscopy confirms super-exchange interactions, while EXAFS analysis identifies enhanced Sb-O bond rigidity, influencing the material's stability. Notably, Gd2CrSbO7 achieves a remarkable maximum magnetic entropy change of -Delta SMmax\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$-\Delta {S}_{M}<^>{\max}$$\end{document} approximate to 21 J/kg K and refrigerant capacity of RC approximate to 430 J/kg (at 0-7 T), comparable to benchmark cryogenic refrigerants like Gd3Ga5O12, but containing substantially low-priced elements. These findings position Gd2CrSbO7 as a promising platform for next-generation magnetic cooling, while shedding light on emergent magnetic and electronic phenomena in pyrochlore oxides.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Polymorphism of Sr2ZnIrO6 Double Perovskite at High Pressure and Temperature

  • Monteseguro, Virginia
  • Kayser, Paula
  • Candela, Marina Teresa
  • Catalin Popescu
  • Alonso, José Antonio
  • Ruiz-Fuertes, Javier
  • Gallego-Parra, Samuel|||0000-0001-6516-4303
  • Sans-Tresserras, Juan Ángel|||0000-0001-9047-3992
[EN] The structural behavior of Sr2ZnIrO6 double perovskite has been systematically studied under extreme conditions, both at high temperature and high pressure with synchrotron powder X-ray diffraction. At high temperatures, three structural phase transitions are detected at 473, 673, and 873 K, giving the sequence P21/n -> I2/m -> I4/m -> Fm3m. At high pressure, a phase transition from monoclinic P21/n to tetragonal I4/m symmetry is observed at 7.5(1) GPa, as confirmed by ab initio calculations. The tetragonal high-pressure I4/m polymorph appears at both high and intermediate temperatures, highlighting a displacive transition with an estimated negative pressure dependence of the critical temperature (dT c/dp = -51 K/GPa). The bulk modulus (similar to 150 GPa) and the volumetric thermal expansion (similar to 3.4 x 10-5 K-1) are determined for the low- and high-pressure phases (P21/n and I4/m)., This research was funded by the Spanish Ministerio de Ciencia e Innovacion and the Agencia Estatal de Investigacion (MICIU/AEI/10.13039/501100011033) and FEDER under projects PID2021-125927NB-C21, PID2021-125927NA-C22, PID2021-122477OB-I00, and CNS2024-154508. The experiments were performed at MSPD beamline at ALBA Synchrotron with the collaboration of Dr. Fauth during beamtimes 2017022065 and 2021095321. V.M. thanks the MICINN for the Beatriz Galindo distinguished researcher program (BG20/00077). M.T.C. would like to thank University of Cantabria for the predoctoral grant "Concepcion Arenal", co-financed by the Government of Cantabria.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning Magnetoconductivity in LaMnO3 NPs through Cationic Vacancy Control

  • Hernando, Antonio
  • Ruíz-González, María Luisa
  • Díaz, Omar
  • Alonso, José M.
  • Martínez, José L.
  • Ayuela, Andrés
  • González-Calbet, José M.
  • Cortés Gil, Raquel
The inclusion of La-Mn vacancies in LaMnO3 nanoparticles leads to a noticeable change in conductivity behavior. The sample retains its overall insulator characteristic, with a typical thermal activation mechanism at high temperatures, but it presents high magnetoconductivity below 200 K. The activation energy decreases linearly with the square of the reduced magnetization and vanishes when the sample is magnetized at saturation. Therefore, it turns out that electron hopping between Mn3+ and Mn4+ largely contributes to the conductivity below the Curie temperature. The influence of the applied magnetic field on conductivity also supports the hypothesis of hopping contribution, and the electric behavior can be explained as being due to an increase in the hopping probability via spin alignment., This research was funded by the Spanish Ministry for Science and Innovation (MCIN/AEI/10.13039/501100011033) grant numbers MAT2017-82252-R, PID2020-113753RB-100, PID2021-122477OB-I00 and TED2021-129254B-C22., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetocaloric Properties in Rare-Earth-Based Metal-Organic Frameworks: Influence of Magnetic Density and Hydrostatic Pressure

  • Vasile, Raluca L.
  • Silva, Romualdo S.
  • Céspedes, Eva
  • Martínez, J. L.
  • Gutiérrez-Puebla, Enrique
  • Monge, M. Ángeles
  • Gándara Barragán, Felipe
Magnetic refrigeration based on the magnetocaloric effect (MCE) in metal-organic frameworks (MOF) is regarded as an attractive approach to create more sustainable cooling systems with higher efficiency than traditional ones. Here, we report a study of the MCE in a series of rare-earth-based MOFs. We have considered the selection of the rare-earth cation by investigating materials belonging to the α-rare-earth polymeric framework-4 (α-RPF-4) MOF family, synthesized with different rare-earth cations, and observed that paramagnetic moment and saturation magnetization play an important role in enhancing the magnetic entropy change ΔSM. The effect of structural parameters has also been considered by investigating three classes of metal-organic Gd materials built up from different types of inorganic secondary building units, including clusters (as in Gd-UiO-66), one-dimensional (as in α-RPF-4), and layered (as in Gd-LRH) conformations. Moreover, the analysis of the hydrostatic pressure influence reveals a significant increase in the −ΔSM and relative cooling power (RCP) with values between 4.3 and 16.3 and 121-509 J/kg. Specifically, the RCPmax found was ∼683 J/kg for Gd-UiO-66, which is higher than the one recently observed for Gd2SiO5 (649.5 J/kg). The present study demonstrates that the engineering of metal-organic framework systems based on high Gd densities may favor enhancing of magnetocaloric responses even at low pressures, thus promoting a new design strategy for efficient cooling devices. © 2023 American Chemical Society., This work received financial support through projects PID2021–123287OB-I00, PID2021–122477OB-I00, TED2021–129254B–C21, and TED2021–129254B–C22, funded by MCIN/AEI/10.13039/501100011033/and ERDF A way to make Europe and PLEC2021- 007906 (SOLFuture) funded by MCIN/AEI/10.13039/501100011033 and European Union NextGenerationEU., Supporting information, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploring the Interplay between Structure and Electronic Behavior across Pressure-Induced Isostructural and Structural Transitions in Weyl-Type Semimetal NbAs

  • Rodrigues, J. E.
  • Mijit, Emin
  • Rosa, Angelika D.
  • Silenzi, Laura
  • Hara, Nodoka
  • Popescu, Catalin
  • Alonso, J. A.
  • Irifune, Tetsuo
  • Hu, Zhiwei
  • Di Cicco, Andrea
NbAs is a Weyl semimetal and belongs to the group of topological phases that exhibit distinct quantum and topological attributes. Topological phases have a fundamentally different response to external perturbations, such as magnetic fields. To obtain insights into the response of such phases to pressure, we conducted a comprehensive study on the pressure-induced electronic and structural transitions in NbAs. We used micro-X-ray diffraction (XRD) and micro-X-ray spectroscopy (XAS) techniques to elucidate the changes at different atomic and electronic length scales (local, medium, and bulk) as combined with theoretical calculations. High-pressure XRD measurements revealed a rather common compression behavior up to ~12 GPa that could be fitted to an equation of state formalism with a bulk modulus of ⟨𝐾0⟩= 179.6 GPa. Complementary Nb K-edge XAS data unveiled anomalies at pressure intervals of ~12–15 and ~25–26 GPa in agreement with previous literature data from XRD studies. We attribute these anomalies to a previously reported topological Lifshitz transition and the tetragonal-to-hexagonal phase transition, respectively. Analysis of EXAFS results revealed slight changes in the mean next-nearest neighbor distance Nb–As(1) (~2.6 Å) at ~15 GPa, while the second nearest neighboring bond Nb–Nb(1) (~3.4 Å) shows a pronounced anomaly. This indicates that the electronic changes across the Lifshitz transition are accommodated first in the medium-range atomic structure and then at the local range and bulk. The variances of these bonds show anomalous but progressive evolutions close to the tetragonal-to-hexagonal transition at ~25 GPa, which allowed us to derive the evolution of vibration properties in this material. We suggest a prominent displacive character of the 𝐼41𝑚𝑑→𝑃6̲𝑚2 transition facilitated by phonon modes, J.A.A. and C.P. thank the financial support from the Spanish Ministry for Science and Innovation (MCIN/AEI/10.13039/501100011033) with grant numbers. PID2021-122477OB-I00, TED2021-129254B-C22, and PID2021-125927NB-C21, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning of Antiferromagnetic Phase in La1–xSrxMnO3 Epitaxial Thin Films by Polymer-Assisted Deposition Synthesis

  • Toda Casaban, Meritxell
  • Frontera, Carlos
  • Pomar, Alberto
  • Herrero Martín, Javier
  • Alonso, José Antonio
  • Balcells, Lluis
  • Mestres, Narcís
  • Martínez Perea, Benjamín
Epitaxial thin films of the La1-xSrxMnO3 system, spanning a wide range of compositions (0.5 ≤ x ≤ 0.65), have been prepared, using the polymer-assisted deposition method, on SrTiO3 (100) substrates. The primary objective was to achieve the highly stable A-type antiferromagnetic (AF) phase associated with x = 0.5. However, the electronic and magnetic properties of the samples, with different substitution levels of La with Sr, exhibit deviations from the anticipated behavior according to the bulk phase diagram. Employing X-ray absorption spectroscopy, we demonstrate that the effective 0.5:0.5 ratio of Mn3+:Mn4+ is actually attained in the sample with x = 0.65, suggesting the presence of an alternative charge compensation mechanism. High oxygen pressure annealing processes allow us to demonstrate that oxygen vacancies, generated to accommodate the epitaxial structural strain, are responsible for the partial charge compensation and the observed deviations from the bulk phase diagram., This research was funded by “Spanish Ministry of Science and Innovation” through “Severo Ochoa” (CEX2019-000917-S), “OXISOT” (PID2021-128410OB-100), and PID2021-122477OB-I00. M.T.-C. acknowledges financial support from “Spanish Ministry of Science, Innovation and Universities” through a FPU scholarship. This work has been performed in the framework of the Ph.D. program in Materials Science of the Universitat Autònoma de Barcelona (UAB)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Valence Variability Induced in SrMoO₃ Perovskite by Mn Doping: Evaluation of a New Family of Anodes for Solid-Oxide Fuel Cells

  • Sánchez de Bustamante, Lucía
  • Silva, Romualdo S.
  • Martínez, J. L.
  • Fernández-Díaz, María Teresa
  • Aguadero, Ainara
  • Alonso, J. A.
We report on a series of SrMo1−xMnxO3−δ perovskite oxides designed as potential anode materials for solid oxide fuel cells (SOFCs). These materials were synthesized using a citrate method, yielding scheelite-type precursors with nominal SrMo1−xMnxO4 compositions, which were further reduced to obtain the active perovskite oxides. Their structural evolution was examined through X-ray diffraction (XRD) and neutron powder diffraction (NPD). These techniques provided insights into the crystallographic changes upon Mn doping, revealing key factors influencing ionic conductivity. Whereas the oxidized scheelite precursors are tetragonal, space group I41/a, the reduced perovskite specimens are cubic, space group Pm-3m, and show the conspicuous absence of oxygen vacancies, even at the highest temperature of 800 °C. The transport properties were analyzed through electrical conductivity measurements, exhibiting a metallic-like behavior. Thermogravimetric analysis (TGA) and dilatometry give insights into the thermal stability and expansion behavior, essential for SOFC operation. Test single SOFCs were built in an electrolyte-supported configuration, on LSGM pellets of 300 μm thickness, assessing the performance of the title materials as anodes. This work emphasizes the critical relationship between the crystal structure and its electrochemical behavior, providing a deeper understanding of how doping strategies can optimize fuel cell performance., This research was funded by the Spanish Ministry for Science and Innovation (MCIN/AEI/10.13039/501100011033) for their financial support of the following projects: PID2021-122477OB-I00, TED2021-129254B-C21, and TED2021-129254B-C22., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dy2NiRuO6 perovskite with high activity and durability for the oxygen evolution reaction in acidic electrolyte

  • Rodríguez García, Isabel
  • Gómez de la Fuente, José Luis
  • Galyamin, Dmitry
  • Tolosana-Moranchel, Álvaro
  • Kayser, Paula
  • Salam, Mohamed Abdel
  • Alonso, José Antonio
  • Calle-Vallejo, Federico
  • Rojas Muñoz, Sergio
  • Retuerto, María
Ru mixed oxides may be suitable materials to replace state-of-the-art Ir-based catalysts in the anode of proton exchange membrane electrolyzers. To do this, the activity and especially the durability of Ru for the oxygen evolution reaction (OER) in acidic electrolyte should be improved. This work reports a family of Ru-based perovskites that combines both high activity and durability for the OER in acidic electrolyte. R2NiRuO6 double perovskites with R3+ = Pr3+, Nd3+, Tb3+, Dy3+, Y3+, Ho3+ and Er3+, and with Ni2+ and Ru4+ occupying B and B′ positions have been synthesized and evaluated for the OER in acidic electrolyte. The OER activities of R2NiRuO6 mixed oxides depend on the nature of R3+, with Dy2NiRuO6 displaying the highest activity (1.507 V at 10 mA cm−2) and being stable for more than 400 consecutive OER cycles measured at a slow scan rate. Characterization data indicate that the shorter Ru-O bonds in Dy2NiRuO6 are beneficial for the OER performance compared to the rest of the series. Computational modelling shows that Ru sites at pristine Dy2NiRuO6 are highly active for the OER, and their activity increases slightly upon Dy dissolution and progressively decreases as the local ratio of Ni to Ru is lowered., This work was funded by the PROMET-H2 project from the European Union Horizon 2020 research and innovation programme under grant agreement No. 862253; also, by the Deputyship for Research & Innovation, Ministry of Education of Saudi Arabia for the project number 341; and by the Spanish grants TED2021-131033B-I00, TED2021-132550B-C21, PID2020-116712RB-C21, PID2021-122477OB-I00 and PID2021-127957NB-I00 from MCIN/AEI/10.13039/501100011033. A. T.-M. thanks the Consejería de Educación, Juventud y Deporte of the Comunidad de Madrid for the Ayuda Destinada a la Atracción de Talento Investigador (2020-T2/AMB-19927). I. R.-G. thanks the PhD Program in Electroquímica, Ciencia y Tecnología of Escuela de doctorado of Universidad Autónoma de Madrid. FCV also acknowledges financial support through grant IT1453-22 “Grupos Consolidados UPV/EHU del Gobierno Vasco” and thanks the Red Española de Supercomputación for computational resources (grant QHS-2023-3-0019). The use of supercomputing facilities at SURFsara was sponsored by NWO Physical Sciences, with financial support by NWO., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

NdMn1.5Ru0.5O5, a high-performance electrocatalyst with low Ru content for acidic oxygen evolution reaction

  • Rodríguez García, Isabel
  • Gómez de la Fuente, José Luis
  • Torrero, Jorge
  • García Sánchez, Daniel
  • Abdel Salam, M.
  • Alonso, José Antonio
  • Gago, Aldo Saul
  • Friedrich, Kaspar Andreas
  • Rojas Muñoz, Sergio
  • Retuerto, María
  • Tolosana-Moranchel, Álvaro
A mixed oxide with the crystal structure of the DyMn2O5 family, namely NdMn1.5Ru0.5O5, is reported active for the oxygen evolution reaction (OER) in acidic media. NdMn1.5Ru0.5O5 displays high OER activity of 500 A gRu−1 at 1.5 V. Moreover, is more stable than most Ru oxides reported to date, remaining active for more than 500 cycles between 1.1. and 1.7 V at low scan rate of 10 mV s−1. The high activity and stability are attributed to the Ru cations, as NdMn2O5 exhibits very low OER activity. NdMn1.5Ru0.5O5 has particularly short Ru–Ru distances of 2.60 Å, a value close to the Ru–Ru metallic distances around 2.642 Å. The high activity and durability of NdMn1.5Ru0.5O5 for the OER are also demonstrated in a proton exchange membrane water electrolysis cell by producing a low-loaded anode electrode with 0.5 mgRucm−2. The cell achieves 1.97 V at 0.5 A cm−2, consistent with the performances reported for Ru-based catalysts but with lower Ru loading. This performance is maintained during 100 h of operation. Additionally, NdMn1.5Ru0.5O5 displays visible ORR activity in acidic media, recording an onset potential of 0.85 V at 0.1 mA cm−2. It is noteworthy to highlight the extreme rarity of bifunctional ORR/OER catalysts acidic media., This work was funded by PROMET-H2 project from the European Union's Horizon 2020 research and innovation programme under grant agreement No 862253; also, by the Deputyship for Research & Innovation, Ministry of Education of Saudi Arabia for the project number 341; and by the Spanish grants PID2020-116712RB-C21, PID2021-122477OB-I00 and TED2021-131033B–I00 from MCIN/AEI/10.13039/501100011033. A. T-M thanks the Consejería de Educación, Juventud y Deporte of the Comunidad de Madrid for the Ayuda Destinada a la Atracción de Talento Investigador (2020-T2/AMB-19927). I. R-G thanks the PhD Program in Electroquímica, Ciencia y Tecnología of Escuela de doctorado of Universidad Autónoma de Madrid., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mapping Pressure- and Temperature-Induced Structural and Magnetic Transitions in Perovskite PrNiO3 with Local and Long-Range Probes

  • Rodrigues, João Elias
  • Rosa, Angelika D.
  • Gainza, Javier
  • Silva, Romualdo S.
  • Mijit, Emin
  • Garbarino, Gaston
  • Irifune, Tetsuo
  • Shinmei, T.
  • Dejoie, Catherine
  • Nemes, Norbert M.
  • Doménech, José Luis
  • Mezouar, Mohamed
  • Alonso, José Antonio
  • Mathon, Olivier
The RNiO<inf>3</inf> nickelate perovskites represent a promising class of materials for spintronics applications such as in modern communication devices. This is related to the large diversity of properties shown by these compounds. Indeed, depending on the external parameters, such as temperature, pressure, or R cation size, they can exhibit para- or antiferromagnetic behavior and can transform from an insulator to a metal. Among them, PrNiO<inf>3</inf> is one of the most important members because it exhibits tunable electronic and magnetic properties. However, our understanding of how these properties can be modified through external parameters, such as pressure and temperature, remains under debate. In this work, we characterized the structural, electronic, and magnetic properties of PrNiO<inf>3</inf> in the range of 0-21 GPa and 10-973 K. For this purpose, we performed synchrotron X-ray diffraction (SXRD), X-ray absorption near-edge structure spectroscopy (XANES), and magnetic measurements. We compared the experimental XANES data with ab initio calculations to extract information about the electronic structure. The diffraction data demonstrated a sharp transition at the bulk level between monoclinic and orthorhombic PrNiO<inf>3</inf> (P2<inf>1</inf>/n → Pbnm) at T<inf>IM</inf> ∼ 130 K, while XANES data, which probe the medium-range and electronic structure, showed progressive changes between 90 and 130 K. The latter is in accordance with our previous EXAFS data, attesting that this transition occurs around 130 K and that it is driven at the local and medium-range scales. Between 700 and 800 K at ambient pressure, the Pbnm phase transforms into a rhombohedral phase (R3̅c), in agreement with a previous laboratory X-ray diffraction study. Our XANES data and ab initio simulations across this transition indicate a significant raising of the orbital overlap between Ni 3d and O 2p, suggesting superior electronic properties of the rhombohedral phase compared to the orthorhombic structure. Under isothermal cold compression, we found that the Pbnm to R3̅c transition is characterized by a large coexisting domain between 5.8 and 12.2 GPa. Based on the present and literature data, we proposed an extended pressure- and temperature-phase diagram of PrNiO<inf>3</inf> and provided first-order constraints on the interplay between external parameters and properties in nickelates., This research was partially funded by the Spanish Ministry for Science and Innovation (MCIN/AEI/10.13039/501100011033) with grant number PID2021-122477OB-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanism of Topotactic Reduction-Oxidation Between Mg-Doped SrMoO3 Perovskites and SrMoO4 Scheelites, Utilized as Anode Materials for Solid Oxide Fuel Cells

  • Cascos, Vanessa
  • Fernández-Díaz, M. T.
  • Alonso, José Antonio
This article belongs to the Special Issue Progress in Materials for Solid Oxide Fuel Cells (SOFCs): Structure-Performance Correlation., Recently, we have described SrMo1-xMgxO3-δ perovskites (x = 0.1, 0.2) as excellent anode materials for solid oxide fuel cells (SOFCs), with mixed ionic and electronic conduction (MIEC) properties. After depositing on the solid electrolyte, they were annealed for sintering at high temperatures (typically 1000 °C), giving rise to oxidized scheelite-type phases, with SrMo1-xMgxO4-δ (x = 0.1, 0.2) stoichiometry. To obtain the active perovskite phases, they were reduced again in the working anode conditions, under H2 atmosphere. Therefore, there must be an excellent reversibility between the oxidized Sr(Mo, Mg)O4-δ scheelite and the reduced Sr(Mo, Mg)O3-δ perovskite phases. This work describes the topotactical oxidation, by annealing at 400 °C in air, of the SrMo0.9Mg0.1O3-δ perovskite oxide. The characterization by X-ray diffraction (XRD) and neutron powder diffraction (NPD) was carried out in order to determine the crystal structure features. The scheelite oxides are tetragonal, space group I41/a (No. 88), whereas the perovskites are cubic, s.g. Pm-3m (No. 221). The Rietveld refinement of the scheelite phase from NPD data after annealing the perovskite at 400 °C and cooling it down slowly to RT evidences the absence of intermediate phases between perovskite and scheelite oxides, as well as the presence of oxygen vacancies in both oxidized and reduced phases, essential for their performance as MIEC oxides. The topotactical relationship between both crystal structures is discussed., We thank funding from the Spanish Ministry for Science and Innovation (MCIN/AEI/10.13039/501100011033) with grant numbers PID2021-122477OB-I00 and TED2021-129254B-C22., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dual doping synergy: Optimizing SrMoO3 perovskite anodes via in-situ Ni exsolution and Cr doping for enhanced SOFC efficiency

  • Sánchez de Bustamante, Lucía
  • Aguadero, Ainara
  • Fernández-Díaz, M. T.
  • Santos Silva, Romualdo
  • Biskup, N.
  • Doménech Martínez, José Luis
  • Alonso, José Antonio
In this work, a family of SrMoO3 perovskites doped with equimolar amounts of Cr and Ni at the Mo position (SrMo1-xCrx/2Nix/2O3, x = 0.1, 0.2) was synthesised for their application as anodes in intermediate temperature solid-oxide fuel cells (IT-SOFCs). Whereas Cr doping is intended to favour the creation of oxygen vacancies in the perovskites, Ni atoms are exsolved from the perovskite crystal structure to the surface, thus favouring the electrocatalytic behaviour of the anodes. These materials have been synthesised by a sol-gel reaction and structurally characterised by laboratory X-ray diffraction (XRD), neutron powder diffraction (NPD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Additionally, physical properties such as thermal expansion behaviour, thermogravimetric analysis and electrical conductivity have been analysed and correlated to their electrochemical performance as anodes in SOFC mode, leading to maximum conductivities of 130 Scm−1 and cell performances of 862 mW/cm2 due to the synergistic action introduced by the enhanced mixed ionic and electronic conduction by Cr3+ doping at the Mo sites, and the in-situ exsolution of Ni nanoparticles that favours the electrocatalytic efficiency., We would like to express our gratitude to the Spanish Ministry for Science and Innovation (MCIN/AEI/10.13039/501100011033) for their financial support of the following projects: PID2021–122477OB-I00, PID2021–122980OB-C51, TED2021–129254B-C21 and TED​​​​​​​2021–129254B−C22. L.S. also wants to thank MCIN for granting the contract PRE2022–103236. The electron microscopy and spectroscopy was performed in the National Centre for Electron Microscopy in Madrid, in the framework of ICTS-ELECMI., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

2D Co-Mo-Hydroxide-Based Multifunctional Material for the Development of H2-Based Clean Energy Technologies

  • Muñoz-Gil, D.
  • Castillo-Blas, Celia
  • Feler, D.K.
  • Gómez-Recio, I.
  • Tinoco, M.
  • Querejeta-Fernández, A.
  • González-Prieto, R.
  • Gándara Barragán, Felipe
  • Silva, Romualdo S.
  • Ferrer, P.
  • Prieto, Carlos
  • Lajaunie, L.
  • Martínez, José L.
  • Ruiz-González, M.L.
  • González-Calbet, J.M.
Layered double hydroxides (LDH) based on transition metals are highly flexible in tailoring their dimensionality, lattice, and electronic structures, making them promising candidates as multifunctional 2D materials for the development of clean energy technologies and boosting the use of hydrogen as an energy vector. In this paper, strategic anion substitution in cobalt LDH is an appealing strategy to produce a material with two-fold functionality, electrochemical and magnetocaloric response, offering a sustainable alternative to existing electrocatalysts and cryogenic refrigerants. It is unambiguously demonstrated that (poly)oxomolybdate-based specimens interleave in Co LDH nanosheets up to a Co:Mo = 1:0.4 ratio, leading to an interstratified material. This intercalation greatly benefits the kinetics of the oxygen evolution reaction for H2 production, boosting the catalytic sites due to the expansion of the interlayer space, induced by the bulky molybdates which also partially modify the Co oxidation state of αCo(OH)2 nanolayers, favoring charge transfer. In parallel, the interleaved Mo species strengthen superexchange interactions compared with pristine α-Co(OH)2, effectively adjusting the operating temperature toward the liquid hydrogen range (2030 K). This specific temperature range allows to fill a critical gap in magnetocaloric materials, as few systems can simultaneously achieve both large magnetic entropy changes and structural stability. © 2025 The Author(s). Advanced Materials published by Wiley-VCH GmbH., Comunidad de Madrid. Grant Number: PR47/21 MAD2D-CM PRTR-CM (CM) UCM6 Spanish Ministry for Science, Innovation and Universities. Grant Number: MICIU/AEI/10.13039/ 501 100 011 033 NextGenerationEU/PRTR and ERDF. Grant Numbers: PID2021-122477OB- I00, PID2021-123287OB-I00, TED2021-129254B−C21, TED2021-129254B−C22 Green Hydrogen Production with Next Generation Polymeric Electrolyzers. Grant Number: TED2022-131033B-100 Ministerio de Ciencia e Innovación, la Agencia Estatal de Investigaci”ón. Grant Number: MCIN/AEI/10.13039/501 100 011 033/FEDER UE European Union “NextGenerationEU”/PRTR. Grant Numbers: PID2022-140370NB-I00, RYC2021-033764-I, CPP2021-008986, CNS2024-154587 Comunidad de Madrid for an Atracción de Talento César Nombela. Grant Number: 2024-T1/TEC-31450 Harwell XPS facility. Grant Number: SI40403-1, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly active and stable OER electrocatalysts derived from Sr2MIrO6 for proton exchange membrane water electrolyzers

  • Retuerto, María
  • Pascual, Laura
  • Torrero, Jorge
  • Abdel Salam, Mohamed A.
  • Tolosana-Moranchel, Álvaro
  • Gianolio, Diego
  • Ferrer, Pilar
  • Kayser, Paula
  • Wilke, Vincent
  • Stiber, Svenja
  • Celorrio, Verónica
  • Mokthar, Mohamed
  • Garcia-Sanchez, Daniel G.
  • Gago, Aldo S.
  • Friedrich, Kaspar A.
  • Peña, Miguel A.
  • Alonso, J. A.
  • Rojas Muñoz, Sergio
Proton exchange membrane water electrolysis is a promising technology to produce green hydrogen from renewables, as it can efficiently achieve high current densities. Lowering iridium amount in oxygen evolution reaction electrocatalysts is critical for achieving cost-effective production of green hydrogen. In this work, we develop catalysts from Ir double perovskites. Sr<inf>2</inf>CaIrO<inf>6</inf> achieves 10 mA cm−2 at only 1.48 V. The surface of the perovskite reconstructs when immersed in an acidic electrolyte and during the first catalytic cycles, resulting in a stable surface conformed by short-range order edge-sharing IrO<inf>6</inf> octahedra arranged in an open structure responsible for the high performance. A proton exchange membrane water electrolysis cell is developed with Sr<inf>2</inf>CaIrO<inf>6</inf> as anode and low Ir loading (0.4 mg<inf>Ir</inf> cm−2). The cell achieves 2.40 V at 6 A cm−2 (overload) and no loss in performance at a constant 2 A cm−2 (nominal load). Thus, reducing Ir use without compromising efficiency and lifetime. © 2022, The Author(s)., The authors acknowledge PROMET-H2 project. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 862253. The Deputyship for Research & Innovation, Ministry of Education of Saudi Arabia is acknowledged for funding this research work through the project number 341. Financial support from grants PID2020-116712RB-C21, PID2021-122477-OB-I00 and PID2019-103967RJ-I00 funded by MCIN/ AEI/10.13039/501100011033 is acknowledged. M.R. thanks RyC2019- 026521 from MCIN/AEI/10.13039/501100011033 and “ESF Investing in your future” and L´Oréal-UNESCO for a “For Women in Science” Fellowship. The authors acknowledge Diamond Light Source for time on Beamline B18 under the proposal SP27733-1. The authors wish to acknowledge the Deutsche Akademische Austausch Dienst (DAAD), Scholarship code number 57540124., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of B-site substitution on the correlated structural–electrical–magnetic properties in the double-layered manganite La2.01Sr0.99Mn2-xZnxO7 (x = 0 and 0.2)

  • Bellouti, A.
  • Mahamdioua, N.
  • Altintas, S.P.
  • Koc, N.S.
  • Denbri, F.
  • Meriche, F.
  • Alonso, J. A.
  • Martínez, José L.
In the present work, the effect of Zn substitutionon the structural, electrical, and magnetic properties of Zn-substituted double-layered manganite with La2.01Sr0.99Mn2-xZnxO7(x=0and0.2) formula has been investigated. Both compounds were synthesized using the solid-state reaction method. The X-ray diffraction analysis, based on the diffractograms refinement, reveals that both samples crystallize in a tetragonal structure with an I4/mmm space group with a notable increase in the cell parameters and a decrease in crystallite size upon substitution. A decrease in the grain sizes is observed through the analysis of scanning electron microscope images. The electrical resistivity investigation, using the four-probe technique, indicates that both compounds exhibit metal–insulator transition TMI, which shifted to lower temperatures with 10% Zn substitution, accompanied by a considerable increase in resistivity. The resistivity fitting curves revealed that the electrical conduction is governed by a combination of the residual, weak localization, and electron–electron interactions atT<TMI, whereas atT>TMI, it is governed by two models: adiabatic small polaron hopping (ASPH) above θD/2 and 3D-Mott’s variable range hopping (VRH) below it. A slight improvement in the obtained magnetoresistance was observed in the substituted sample atT<59K. Density of state, mean hopping distance Rh, and mean hopping energy Eh were determined and discussed. The magnetic investigation revealed a decrease in the Curie temperature with substitution from 335 to 212 K, and the appearance of the Griffiths phase. Magnetization measurements as a function of magnetic field revealed the presence of the ferromagnetic state at 5 K for both samples. At room temperature, the parent sample remains in ferromagnetic state, while the substituted one changes to a paramagnetic state. The present findings demonstrate that Zn doping modifies double exchange and the metal–insulator transition, enhancing magnetoresistance and providing insights for low-temperature magnetic sensor applications and layered manganite physics. © The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature 2025., This work was supported by “Directorate General for Scientific Research and Technological Development—Algeria,” and JAA and JLM thank the Spanish Ministry of Science and Innovation for granting the project numbers: PID2021-122477OB-I00, funded by MCIN/AEI/ https://doi.org/10.13039/501100011033 and by “ERDF A way of making Europe,” by the “European Union.”s., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced ferromagnetism in monolayer Cr2Te3 via topological insulator coupling

  • Ou, Y.
  • Mirzhalilov, M.
  • Nemes, N.M.
  • Martínez, José L.
  • Rocci, M.
  • Duong, A.
  • Akey, A.
  • Foucher, A.C.
  • Ge, W.
  • Suri, D.
  • Wang, Y.
  • Ambaye, H.
  • Keum, J.
  • Randeria, M.
  • Trivedi, N.
  • Burch, K.S.
  • Bell, D.C.
  • Ross, F.M.
  • Wu, W.
  • Heiman, D.
  • Lauter, V.
  • Moodera, J.S.
  • Chi, H.
Exchange-coupled interfaces are pivotal in exploiting two-dimensional (2D) ferromagnetism. Due to the extraordinary correlations among charge, spin, orbital and lattice degrees of freedom, layered magnetic transition metal chalcogenides (TMCs) bode well for exotic topological phenomena. Here we report the realization of wafer-scale Cr2Te3 down to monolayer (ML) on insulating SrTiO3(111) and/or Al2O3(001) substrates using molecular beam epitaxy. Robust ferromagnetism persists in the 2D limit. In particular, the Curie temperature TC of 2 ML Cr2Te3 increases from 100 K to ∼120 K when proximitized to topological insulator (TI) (Bi,Sb)2Te3, with substantially boosted magnetization as observed via polarized neutron reflectometry. Our experiments and theory strongly indicate that the Bloembergen-Rowland interaction is likely universal underlying TC enhancement in TI-coupled magnetic heterostructures. The topological-surface-enhanced magnetism in 2D TMC enables further exchange coupling physics and quantum hybrid studies, including paving the way to realize interface-modulated topological electronics. © 2025 The Author(s). Published by IOP Publishing Ltd., This work was supported by Army Research Office (ARO W911NF-20-2-0061), the National Science Foundation (NSF-DMR 2218550), Office of Naval Research (N00014-20-1-2306). H C acknowledges support of the Canada Research Chairs (CRC) Program, and the Natural Sciences and Engineering Research Council of Canada (NSERC), Discovery Grant RGPIN-2024-06497 and ALLRP 592642-2024. Y O, D S, J S M and D C B thank the Center for Integrated Quantum Materials (NSF-DMR 1231319) for financial support. This work made use of the MIT Materials Research Laboratory. D H thanks support from NSF-DMR 1905662 and the Air Force Office of Scientific Research Award No. FA9550-20-1-0247. N M N and J L M were supported by Ministerio de Ciencia e Innovacion, Spain, with Grant Numbers MAT2017-84496-R, PID2021-122477OB-I00, TED2021-129254B-C21 and TED2021-129254B-C22. M R received funding from the European Union Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Grant Agreement EuSuper No. 796603. The STEM work was performed in part at the Center for Nanoscale Systems (CNS), a member of the National Nanotechnology Coordinated Infrastructure Network (NNCI), which is supported by NSF Award No. 1541959. A C F is supported by the MIT-IBM Watson AI Lab. This work was carried out in part through the use of MIT.nano’s facilities. The MFM studies at Rutgers were supported by the Office of Basic Energy Sciences, Division of Materials Sciences and Engineering, U.S. Department of Energy under Award No. DE-SC0018153. The Raman measurements of Y W and K S B were performed with support from the Air Force Office of Scientific Research under Award No. FA9550-24-1-011. This research used resources at the Spallation Neutron Source, a Department of Energy Office of Science User Facility operated by the Oak Ridge National Laboratory (ORNL). Neutron reflectometry measurements, beamtime proposal IPTS-24447, were carried out on the Magnetism Reflectometer at the SNS, which is sponsored by the Scientific User Facilities Division, Office of Basic Energy Sciences, DOE. XRR measurements were conducted at the CNMS at ORNL, which is a DOE Office of Science User Facility. M M, M Ra and N T were supported by the NSF Materials Research Science and Engineering Center Grant No. DMR-2011876. N T thanks K Lee for discussions. Notice: This manuscript has been authored by UT-Battelle, LLC under Contract No. DE-AC05-00OR22725 with the U.S. Department of Energy. The United States Government retains and the publisher, by accepting the article for publication, acknowledges that the United States Government retains a non-exclusive, paid-up, irrevocable, world-wide license to publish or reproduce the published form of this manuscript, or allow others to do so, for United States Government purposes. The Department of Energy will provide public access to these results of federally sponsored research in accordance with the DOE Public Access Plan, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polymorphism of Sr2ZnIrO6Double Perovskite at High Pressure and Temperature

  • Monteseguro, V.
  • Kayser, P.
  • Candela, M.T.
  • Gallego-Parra, S.
  • Popescu, C.
  • Sans, J.A.
  • Alonso, J.A.
  • Ruiz-Fuertes, J.
The structural behavior of Sr2ZnIrO6double perovskite has been systematically studied under extreme conditions, both at high temperature and high pressure with synchrotron powder X-ray diffraction. At high temperatures, three structural phase transitions are detected at 473, 673, and 873 K, giving the sequence P21/n → I2/m → I4/m → Fm3̅m. At high pressure, a phase transition from monoclinic P21/n to tetragonal I4/m symmetry is observed at 7.5(1) GPa, as confirmed by ab initio calculations. The tetragonal high-pressure I4/m polymorph appears at both high and intermediate temperatures, highlighting a displacive transition with an estimated negative pressure dependence of the critical temperature (dTc/dp = −51 K/GPa). The bulk modulus (∼150 GPa) and the volumetric thermal expansion (∼3.4 × 10–5K–1) are determined for the low- and high-pressure phases (P21/n and I4/m). © 2025 American Chemical Society, This research was funded by the Spanish Ministerio de Ciencia e Innovación and the Agencia Estatal de Investigación (MICIU/AEI/10.13039/501100011033) and FEDER under projects PID2021-125927NB-C21, PID2021-125927NA-C22, PID2021-122477OB-I00, and CNS2024-154508. The experiments were performed at MSPD beamline at ALBA Synchrotron with the collaboration of Dr. Fauth during beamtimes 2017022065 and 2021095321. V.M. thanks the MICINN for the Beatriz Galindo distinguished researcher program (BG20/00077). M.T.C. would like to thank University of Cantabria for the predoctoral grant “Concepción Arenal”, co-financed by the Government of Cantabria., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

From Oxidized PrNi0.9Al0.1O3to Reduced PrNi0.9Al0.1O2+δPerovskite Nickelates: Stabilization of Infinite-Layer Specimens with Monovalent Ni in the Bulk Polycrystalline Form

  • Gainza, Javier
  • López, C.A.
  • Silva, Romualdo S.
  • Rodrigues, J.E.F.S.
  • Serrano-Sánchez, Federico
  • Skorynina, A.
  • Nemes, N. M.
  • Fernández-Díaz, M.T.
  • Martínez, José L.
  • Alonso, J.A.
Recently, a new class of high-temperature superconductors, RNiO2(where R represents rare-earth elements) with infinite-layer (IL) structure, has been identified. They possess the same structural framework as the renowned high-Tccuprates but with nickel replacing copper as the central element. In this study, we successfully synthesized infinite-layer samples of PrNi0.9Al0.1O2+δin the bulk polycrystalline form through topotactic reduction of the PrNi0.9Al0.1O3orthorhombic perovskite, via treatment with CaH2. The incorporation of aluminum at the octahedral sites promotes the stabilization of bulk derivatives of the infinite-layer structure since unreduced [AlO6] octahedra keep the layers together and prevent their decomposition. The lack of superconductivity in bulk samples has been a subject of intense debate in recent literature. One major theoretical question concerns whether hydrogen becomes incorporated into the structure during the reduction from RNiO3to RNiO2─as suggested by theory. Here, we present neutron powder diffraction data demonstrating that hydride ions indeed reside within the IL lattice in samples of stoichiometry PrNi0.9Al0.1O2.10H0.16. Additional crystallographic analyses were carried out using temperature-dependent synchrotron X-ray diffraction on both reduced and oxidized phases. Furthermore, spectroscopic analysis via XAS and magnetometry confirms the reduction of Ni3+ to the Ni+ oxidation state, aligning with the crystallochemical evidence. © 2025 The Authors. Published by American Chemical Society, We sincerely appreciate the financial support provided by the Spanish Ministry for Science and Innovation (MCIN/AEI/10.13039/501100011033) through grants: PID2021- 122477OB-I00, TED2021-129254B-C21, PID2021- 122980OB-C51, and TED2021-129254B-C22. The authors also extend their gratitude to the Institut Laue-Langevin (ILL), the European Synchrotron Radiation Facility (Grenoble, France), and the ALBA Synchrotron Light Source (Cerdanyola del Vallès, Spain) for granting access to their facilities for neutron, synchrotron X-ray diffraction (experiment HC5191 and in-house research program), and X-ray absorption experiments (proposal number: 2023097812), respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the Magnetotransport Properties and Griffith Phase in the (La,Gd)1.4(Ca,Sr)1.6Mn2O7 Double-Layered Manganites

  • Belguet, R.
  • Mahamdioua, N.
  • Meriche, F.
  • Denbri, F.
  • Alonso, J. A.
  • Martínez, J. L.
  • Polat-Altintas, S.
  • Terzioglu, C.
The double-layered manganite La1.2Gd0.2Ca1.2Sr0.4Mn2O7 was prepared by the solid-state reaction route, and its structural, microstructural, magnetic, electrical, and magnetotransport properties were investigated. Rietveld refinement analysis of the X-ray diffractogram shows that the structure is indexed in a tetragonal structure with an I4/mmm space group with an impurity phase. The microstructure was examined using scanning electron microscopy. The purity of the sample was examined by the energy-dispersive X-ray spectroscopy investigation. In the context of magnetic measurements, inverse susceptibility, hysteresis loop, and the magnetic behavior of the compound are discussed in detail. The sample displays a phase transition from ferromagnetic (FM) to paramagnetic (PM) at TC, which is equal to 290.13 K. Additionally a Griffith phase (GP) was identified and was found to be 339 K. The sample can be thought of as spin-glass-like since a significant divergence was observed at low temperatures between the magnetization curves M (T) in the zero-field cooling (ZFC) and in the field cooling (FC) modes. The electrical resistivity under an applied magnetic field of 1 T exhibits a metal–insulator transition (TMI) at 152.98 K. The magnetoresistance was observed to decrease with increasing temperature, peaking at 23% at 11 K. The electrical resistivity in the ferromagnetic region (T<TMI) has been found to be a combination of residual resistivity and resistivities due to the weak localization, and to the electron–electron, while the adiabatic small polaron and variable range hopping models may be used to explain the resistivity data at high temperature in paramagnetic region (T>TMI). © The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature 2025., This work was supported by the “Directorate General for Scientific Research and Technological Development – Algeria,” JAA and JLM thank the Spanish Ministry of Science and Innovation for granting the project numbers: PID2021-122477OB-I00, funded by MCIN/AEI/ https:// doi. org/ 10. 13039/ 50110 00110 33 and by “ERDF A way of making Europe,” by the “European Union.”, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetostructural coupling, Kondo-like behavior, and magnetocaloric performance in Fe-doped Nd0.5(Sr0.4Ba0.1)CoO3 perovskites

  • Silva, Romualdo S.
  • Serrano-Sánchez, Federico
  • Rodrigues, J.E.
  • Santos, C.
  • Attah-Baah, J.M.
  • dos Reis, R.D.
  • Doménech, José Luis
  • Alonso, J. A.
  • Ferreira, N.S.
We comprehensively studied the structural, electronic, magnetic, electrical, and magnetocaloric properties of A- and B-site co-doped polycrystalline perovskites Nd0.5(Sr0.4Ba0.1)Co1−xFexO3 (x = 0.0-0.2), which crystallize in a disordered orthorhombic phase with space group (62). Synchrotron X-ray diffraction (SXRD) analyses reveal stable valence states for Co and Fe ions across compositions, with progressive distortion of the [Co/Fe]O6 octahedral symmetry as the Fe content increases. Magnetic measurements indicate a decrease in the paramagnetic-ferromagnetic transition temperature (TC) from 211 K to 206 K, attributed to Fe3+/4+ ↔ Co2+/3+ random magnetic interactions. Temperature-dependent SXRD analysis shows anomalies in the volumetric coefficient of thermal expansion αV(T) and Uiso mean square displacement, correlating with the TC due to magnetoelastic coupling. The magnetocaloric effect (MCE) analysis reveals a second-order phase transition (SOFT) around TC with a maximum magnetic entropy change −ΔSmaxM of 2.03 J kg−1 K−1 and a relative cooling power (RCP) of approximately 226 J kg−1 for x = 0.12. The magnetic order exponents suggest long-range magnetic ordering. Furthermore, X-ray absorption near-edge structure spectroscopy (XANES) indicates consistent valence states for Co and Fe ions across all samples, with increased hybridization between Fe and O atoms due to Fe doping. The electrical resistivity analysis revealed metallic behavior with a notable upturn at ∼110 K, attributed to a localized-itinerant magnetism thermally driven, described by a Kondo-Bloch-Grüneisen type equation. These findings elucidate the role of Fe doping in modulating the structural, electronic, electric, and thermomagnetic properties of Nd0.5(Sr0.4Ba0.1)Co1−xFexO3, offering valuable insights into the underlying magnetic phase diagram of this perovskite system. © 2025 The Royal Society of Chemistry., We acknowledge the financial support of the Coordenação de Aperfeiçoamento de Pessoal de Nível Superior-CAPES (Finance Code-001), the Conselho Nacional de Desenvolvimento Científico e Tecnológico-CNPq (grant no. 309184/2022-3), and the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) to the research projects PID2021-122477OB-I00, TED2021-129254B-C21, and TED2021-129254B-C22. The authors are also grateful to the European Synchrotron Radiation Facility (ESRF) and the Brazilian Synchrotron Light Laboratory (LNLS) for making all the facilities available for SXRD [proposal MA-5866 in ID22] and XANES [proposal 20222183]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structure–property coupling in lead-free halides Rb3Sb2Br9and Rb3Sb2Br6I3obtained by mechanochemistry

  • Chakroun, Yousra
  • Cherif, W.
  • Martinelli, B.
  • López, C.A.
  • Gainza, J.
  • Silva, Romualdo S.
  • Serrano-Sánchez, Federico
  • Ferrer, M.M.
  • Pecharromán, Carlos
  • Rodrigues, J.E.F.S.
  • Alonso, J. A.
All-inorganic perovskites exhibit outstanding light absorption properties in the visible range, making them suitable for solar energy applications. We focus on the synthesis of Rb3Sb2Br9and Rb3Sb2Br6I3halides using mechanochemical procedures. Synchrotron X-ray diffraction (SXRD) data were used for determining the crystallographic evolution in the temperature range 80–673 K. Two phases have been identified, the so-called ‘low-temperature polymorph’, with monoclinic symmetry (S.G: P21/n), and the ‘high-temperature polymorph’ with trigonal symmetry (S.G: P3̄m1). At room temperature, SXRD data confirm the presence of a pure monoclinic phase for Rb3Sb2Br6I3halide, whereas for Rb3Sb2Br9, there is an admixture with the trigonal phase. The transition temperatures were estimated to be Tt∼ 376 K and ∼390 K, for Rb3Sb2Br9and Rb3Sb2Br6I3, respectively, identified from the DSC curves. The monoclinic P21/n structure is composed of double layers of irregular [SbX6] (X = Br, I) octahedra interconnected through common corners. Each octahedron shares three corners with adjacent octahedra, forming a two-dimensional network, with Rb ions located in the interlayer space. A more symmetric lattice is the trigonal P3̄m1 polymorph, where the Sb atoms are coordinated in more regular [SbX6] polyhedra, also forming a 2D network. Symmetry-mode analysis reveals that monoclinic distortion is dominated by octahedral rotations, with cation translations and bond-length modulations acting as secondary stabilizing distortions. Infrared spectroscopy reveals a limited number of active optical phonons, with broader and red-shifted features in Rb3Sb2Br6I3, indicative of enhanced disorder compared to Rb3Sb2Br9. The obtained values of the direct band gaps from UV-Vis-NIR spectroscopy measurements for the monoclinic phases are ∼2.87 eV (for Rb3Sb2Br9) and ∼2.52 eV (for Rb3Sb2Br6I3). By correlating local distortions, electronic structure, and thermodynamic stability, our work establishes a microscopic view of phase competition in Rb3Sb2X9halides and provides design principles for environmentally benign, lead-free optoelectronic materials. This journal is © The Royal Society of Chemistry, 2025, All the authors acknowledge financial support of the Spanish Ministry for Science and Innovation [MCIN/AEI/10.13039/501100011033] with grant numbers: PID2021-122477OB-I00 and TED2021-129254B-C22. CAL is grateful to UNSL and ANPCyT for the financial support [grant number: PROICO 2-2320 and PICT2020A-2437], in Argentine. This work was also supported by Fundação de Amparo à Pesquisa do Estado do Rio Grande do Sul [FAPERGS, Grant 23/2551-0000153-5], Conselho Nacional de Desenvolvimento Científico e Tecnológico [CNPq, Grants 406160/2023-6, 307213/2021-8, 150187/2023-8, and 314278/2023-0], and Fundação de Amparo à Pesquisa do Estado de São Paulo [FAPESP, Grants 22/03959-6, 22/16509-9, and 20/01144-0]. The authors thank the staff of the European Synchrotron Radiation Facility (ESRF) for technical assistance during synchrotron X-ray powder diffraction experiments (experiment: HC-581848 )., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhancing properties through Nd substitution in La–Ca–Sr–MnO3 ceramics: structural, morphological, magnetic, and magneto-electrical insights

  • Denbri, F.
  • Mahamdioua, N.
  • Polat-Altintas, S.
  • Alonso, J.A.
  • Martínez, J. L.
  • Meriche, F.
  • Terzioglu, C.
In this investigation, the effects of Nd substitution on the structural, morphological, magneto-electrical transport, and magnetic properties in the La0.8-xNdxCa0.15Sr0.05MnO3 (x = 0.0, 0.05, 0.10, and 0.20) synthesized via the solid-state reaction were reported. The Rietveld X-ray diffraction (XRD) patterns refinement revealed a Pnma orthorhombic structure. Scanning electron microscopy (SEM) coupled with energy-dispersive X-ray (EDX) spectroscopy revealed a micro-granular morphology with slight variations in average grain size (DSEM) upon Nd substitution, ranging from 1.19 μm for x = 0.10 to 1.78 μm for x = 0.20. EDX analysis confirmed the presence of all expected constituting elements. The temperature-dependent electrical resistivity, ρT, exhibited a metal-to-insulator transition at TMI which gradually decreased with increasing Nd content. Nd substitution significantly enhanced magnetoresistance (MR), yielding a maximum MR% of 48% at T=214K near TMI for the x = 0.10 sample under one tesla. The temperature coefficient of the resistivity (TCR%) showed similar trends, reaching a peak value of 6.30% K−1 for the x = 0.05 sample. For T<TMI, the fitting of resistivity data indicates that the transport mechanism is governed by grain boundary effects, electron–electron scattering, and electron–phonon interactions. For T>TMI, the data are well described by both the Adiabatic Small Polaron Hopping (ASPH) and 3D-Variable Range Hopping (3D-VRH) mechanisms. The obtained values of density of states NEF were found to be in the order of 1019 eV−1.cm−3. The mean hopping distance and the mean hopping energy, extracted from the 3D-VRH model, were found to lie in the ranges of 2.57–3.78 nm and 0.1–0.14 eV, respectively. Magnetization measurements MT,H indicated a ferromagnetic-to-paramagnetic transition at the Curie temperature, TC. The decrease in TC and TMI with increasing Nd3+ concentration was attributed to the weakening of double-exchange interactions between Mn3+ and Mn4+ ions. © The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature 2025., This work was supported by the “Directorate General for Scientific Research and Technological Development— Algeria.” JAA and JLM thank the Spanish Ministry of Science and Innovation for granting the project number PID2021-122477OB-I00, funded by MCIN/AEI/https:// doi. org/ 10. 13039/ 50110 00110 33., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evaluating the photocatalytic potential of the lead-free double perovskite halide Cs2AgBiBr6 for rhodamine-B degradation

  • Martinelli, Brenda
  • Artigas dos Santos Laranjeira, José
  • Ücker, Cátia L.
  • Fabra, Giovanni M.N.
  • Rodrigues, J. E.
  • Silva, Romualdo S.
  • Alonso, J. A.
  • Sambrano, Julio Ricardo
  • Ferrer, Mateus M.
The 21st-century challenge is to discover materials for energy and environmental recovery. Metal halide perovskites are ideal for photovoltaic and optoelectronic applications due to their tunable bandgap, high absorption, broad spectrum, and charge mobility. Improving their properties involves structural characterization to link composition, atomic organization, and performance. Correlating theoretical and experimental results is essential for optimizing their applications. This study examines Cs2AgBiBr6, synthesized mechanochemically, for rhodamine-B photodegradation. Its structure, determined by synchrotron X-ray diffraction and electron microscopy, confirms a double perovskite with the Fm3m space-group. UV-Vis spectroscopy reveals a 2.8 eV (X→L) indirect band gap transition. Cs2AgBiBr6 achieved a 100 % rhodamine-B degradation in 75 minutes, indicating high photocatalytic efficiency. This highlights Cs2AgBiBr6’s versatility in photocatalytic and optoelectronic technologies., This work was supported by Brazilian funding agencies, including the Fundação de Amparo à Pesquisa do Estado do Rio Grande do Sul – FAPERGS (grant 23/2551–0000153–5), the National Council for Scientific and Technological Development – CNPq (grant 406160/2023–6, 307213/2021–8, 150187/2023–8, 314278/2023–0), and the Fundação de Amparo à Pesquisa do Estado de São Paulo – FAPESP (grant 22/03959–6, 22/16509–9, 20/01144–0). Additional support was provided by the Spanish Ministry for Science and Innovation (MCIN/AEI/10.13039/501100011033) through projects PID2021–122477OB-I00, TED2021–129254B-C22, and TED2021–129254B-C21., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Leveraging Grain Boundary Effects for Nanostructured Electrode Layers in Symmetric Solid Oxide Fuel Cells

  • Baiutti, F.
  • Chiabrera, F.
  • Anzengruber, Marlene
  • Kreka, Kosova
  • Sirvent, J.
  • Yedra, Lluis
  • Buzi, F.
  • Liedke, Macej Oskar
  • Cavallaro, Andrea
  • Carmona Zuazo, Albert
  • Estradé, Sonia
  • Butterling, Maik
  • Hirschmann, Eric
  • Wagner, Andreas
  • Aguadero, Ainara
  • Peiró, Francisca
  • Tarancon, Albert
[Data Availability Statement] The data that support the findings of this study are openly available in [Zenodo] at [https://doi.org/10.5281/zenodo.14535944], reference number [14535944]., While grain boundary engineering is attracting great interest as a potential strategy to fabricate highly electrochemically active materials, open questions remain in relation to the fundamental mechanisms of local property enhancement as well as to the potential technological impact of such nanostructuring strategies. In this paper, the ability to turn a predominantly electronic conductor into an excellent mixed-ionic electronic conductor by grain boundary doping is demonstrated for nanocrystalline films of lanthanum chromite. A four-orders-of-magnitude increase in the oxygen diffusion coefficient at grain boundaries is observed, and related to local chemical changes. It is shown that grain boundary effects can be effectively exploited for technological purposes by fabricating a proof-of-concept symmetric solid oxide cell based on lanthanum chromite film electrodes. The cell is operated under reversible gas feeding conditions, exhibiting electrode self-healing characteristics. The results provide new insights on the fundamental aspects of fast grain boundary oxygen diffusion and validate grain boundary engineering as a technologically relevant strategy for the realization of solid oxide cells with enhanced performance., This project received funding from the European Union's Horizon 2020 research and innovation program under grant agreement no. 101017709 (EPISTORE) and by the European Union under HorizonEU research and innovation program OxyBatt (101158721) – European Innovation Council. LY, SE, and FP work is supported by the Spanish projects PID2022-138543NB-C21 and TED2021-129663B-C55 funded by MCIU/AEI/10.13039/501. 10001103 and European Union NextGeneration EU/PRTR and the project 2021SGR00242 from Generalitat de Catalunya. The authors acknowledge the support received from the ICTS ELECMI (Electron Microscopy for Materials Science). LY acknowledges support from the Spanish Ministry for Science and Innovation through the Ramón y Cajal fellowship (RYC2022-037722-I). FP acknowledges the ICREA Academia 2022 grant. AA acknowledges the Spanish national project PID2021-122477OB-I00. This work was partially supported by the Initiative and Networking Fund of the Helmholtz Association (FKZ VH-VI-442 Memriox), and the Helmholtz Energy Materials Characterization Platform (03ET7015). The Surface Analysis Laboratory of the CCiTUB (Lorenzo Calvo Barrio and Laura Garcia Carreras) is acknowledged for carrying the XPS measurements., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mixed ionic and electronic behaviour in SrCo1-xScxO3-δ (x = 0.1 and 0.2) perovskites: novel cathode materials for SOFC

  • Cascos, Vanessa
  • Chivite Lacaba, Mónica
  • Prado-Gonjal, Jesús
  • Fernández-Díaz, M.T.
  • Alonso, J.A.
The oxygen deficient perovskite SrCoO3-δ could outperform as cathode material in intermediate-temperature solid-oxide fuel cells (IT-SOFC) if a three-dimensional (3C-type) framework were stabilized under the stringent working conditions of SOFC. Here, we demonstrate that the inclusion of moderate amounts of Sc at the octahedral sites leads to the stabilization of a tetragonal P4/mmm perovskite superstructure, where the desired 3C framework is preserved, rather than the undesirable 2H polytype-corresponding hexagonal phase. As SOFC cathodes, we studied the thermal, electrical, and electrochemical characteristics of SrCo1−xScxO3-δ (x = 0.1 and 0.2) perovskite oxides. These oxides suit the requirements for mixed ionic and electronic conductors (MIEC) oxides because they have a high concentration of oxygen vacancies, strong electrical conductivity, and great thermal stability. With H2 as fuel and air as the oxidant, single-cell tests for these compositions, in conjunction with La0.8Sr0.2Ga0.83Mg0.17O3−δ (LSGM) as electrolyte and SrMo0.8Fe0.2O3−δ as the anode, produce power densities exceeding 700 mW/cm² at 850 °C., JAA thanks the financial support of the MCIN for funding the project numbers: PID2021-122477OB-I00 and TED2021-129254B-C22. We acknowledge the Institute Laue-Langevin (ILL) for making all facilities available., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Revisiting the structures and phase transitions of PrNiO3 nickelate using symmetry-mode analysis

  • Cherif, W.
  • Alonso, J. A.
  • Rodrigues, J. E.
We have investigated the complete sequence of temperature-induced structural phase transitions in PrNiO3 using high-angular-resolution synchrotron X-ray diffraction and symmetry-adapted distortion-mode analysis. By employing a high-purity sample synthesized under high pressure (3.5 GPa at 1073 K), we resolve the monoclinic (P21/n) → orthorhombic (Pbnm) → rhombohedral (R3c) evolution over an extended temperature range (10–900 K). Beyond confirming the role of oxygen stretching modes in the insulator–metal transition at ∼130 K, we show that these phonon modes also govern the high-temperature metallic–metallic transition at ∼750 K. This work provides a comprehensive mode-resolved picture of both insulator and metallic regimes in PrNiO3 and highlights the central role of phonon-mediated processes in driving charge disproportionation and lattice symmetry breaking across all the crystalline phases., The following funding is acknowledged: Ministerio de Ciencia, Innovación y Universidades (grant No. PID2021-122477OB-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

SrCo0.90Nb0.10O3-δ perovskite as performing cathode for SOFC: structure-properties relationship from high-temperature synchrotron x-ray studies

  • Chivite Lacaba, Mónica
  • Alonso, J. A.
  • Fernández-Díaz, M. T.
  • Cascos, Vanessa
SrCo0.90Nb0.10O3-δ perovskite was described in a previous work as possible cathode material for solid oxide fuel cells (SOFCs). The correlation between structure and properties has been evaluated in this work with a temperature-dependent synchrotron X-ray diffraction (SXRD) study. It assesses the stabilization of a tetragonal P4/mmm structure for T ≤ 600 °C, with three inequivalent positions for oxygen atoms. The subtle tetragonal distortion can be distinguished thanks to the excellent angular resolution of these SXRD data. Above 600 °C, the crystal structure is transformed into a cubic phase defined in a cubic Pm-3m space group, which remains at 800 °C, with a large oxygen deficiency of almost 0.5 oxygen atoms per formula unit, distributed at random in the oxygen sublattice. The properties of SrCo0.90Nb0.10O3-δ as cathode material have been improved with the two different strategies: (1) mixing SrCo0.90Nb0.10O3-δ with different percentages of LSGM electrolyte, thus obtaining a composite with an enhanced ionic conductivity, and (2) infiltrating Pd on SrCo0.90Nb0.10O3-δ to increase its electrocatalytic activity. An impedance spectroscopy study reveals the effect of the LSGM and Pd on the electrochemical properties. Finally, single-cell tests in SOFC devices fed with pure H2, yield substantial output power densities with values over 850 mW/cm2 at 800 and 850 °C., We thank funding from the Spanish Ministry for Science and Innovation (MCIN/AEI/10.13039/501100011033) with grant numbers PID2021-122477OB-I00 and TED2021-129254B-C22. The authors wish to express their gratitude to the Institut Laue-Langevin (ILL) and ALBA Synchrotron for making all facilities available for neutron and synchrotron diffraction experiments., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structural Phase Transition and the Effect of Iodine on Phase Stability in Rb3Bi2Br9 Perovskite-Related Halides with 2D Dimensionality

  • Chakroun, Yousra
  • Cherif, W.
  • López, Carlos A.
  • Martinelli, Brenda
  • Rodrigues, Francielen S. M.
  • Serrano-Sánchez, Federico
  • Gainza, Javier
  • Silva, Romualdo S.
  • Ferrer, Mateus M.
  • Martínez, J. L.
  • Fernández-Díaz, M. T.
  • Rodrigues, J. E.
  • Alonso, J. A.
Rubidium-based halide perovskites Rb3Bi2Br9–xIx (x = 0, 3) represent a lead-free, low-dimensional alternative within the A3B2X9 family, offering promising optoelectronic properties. This work reports the successful synthesis of Rb3Bi2Br9 and Rb3Bi2Br6I3 via mechanochemical ball milling, yielding highly crystalline products. Structural characterization of Rb3Bi2Br9 halide, using synchrotron X-ray and neutron powder diffraction across a broad temperature range (295–656 K), revealed a reversible phase transition from a low-symmetry monoclinic (space group: P21/c) to a high-symmetry trigonal (space group: P3̅̅m1) phase at ∼450 K (both with a 2D dimensionality, concerning the connection of [BiBr6] octahedra). Thermal expansion coefficients, derived from unit-cell evolution, showed discontinuity across the structural phase transition. Symmetry-adapted distortion mode analysis identified octahedral tilting and rigid [BiBr6] framework rotations as the primary contributors to the monoclinic distortion, with minor and moderate contributions from stretching, bending, and Rb atoms translations. Optical characterization at room conditions (monoclinic phase) unveiled bandgaps of ∼2.70 and ∼2.21 eV for Rb3Bi2Br9 and Rb3Bi2Br6I3, respectively. Density functional theory (DFT) calculations corroborated the direct bandgap nature and electronic structure, highlighting the dominant Br and Bi orbital contributions. These results demonstrate the structural richness and optical tunability of Rb3Bi2Br9–xIx, establishing them as robust candidates for stable, lead-free optoelectronic applications., We acknowledge the financial support of the Spanish Ministry for Science and Innovation (MCIN/AEI/10.13039/501100011033) for granting the projects: PID2021-122477OB-I00, TED2021-129254B-C21, and TED2021-129254B-C22. CAL thanks UNSL, CONICET, and ANPCyT for financial support (project numbers PROICO 2-2320, PIP2972, and PICT2020A-2437, respectively). This work was also supported by the Brazilian funding agencies: Fundação de Amparo à Pesquisa do Estado do Rio Grande do Sul (FAPERGS, grant no. 23/2551-0000153-5), the National Council for Scientific and Technological Development (CNPq, grant nos. 406160/2023-6, 307213/2021-8, 150187/2023-8, 314278/2023-0, 2021 3072132021-8), and Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP, grant nos. 22/03959-6, 22/16509-9, and 20/01144-0). The authors wish to express their gratitude to ALBA Synchrotron Light Source, European Synchrotron Radiation Facility (experiment HC-5818), (71) and Institut Laue-Langevin technical staff for making the facilities available for the synchrotron X-ray and neutron powder diffraction experiments., Peer reviewed
Docta Complutense
Publicación Artículo científico (JournalArticle)

Evidence of hydrogen content and monovalent Ni oxidation state in non-superconducting bulk anchored infinite-layer nickelates

  • Gainza, Javier
  • Lopez, Carlos A.
  • Serrano Sanchez, Federico
  • Rodrigues, João Elias F. S.
  • Rosa, Angelika D.
  • Sobrados, Maria Isabel
  • Nemes, Norbert Marcel
  • Biskup Zaja, Nevenko
  • Fernández-Díaz, María Teresa
  • Martinez, Jose Luis
  • Alonso, Jose Antonio
Since superconductivity was first reported in nickelate thin films, many studies have been published about this family of materials, and different hypotheses have been proposed for explaining the mechanisms and structural dependence. Here, we report the synthesis of anchored infinite-layer LaNi0.9Al0.1O2.1 and its hole-doped derivatives by topotactic reduction from La1_xSrxNi0.9Al0.1O3 rhombohedral perovskites. LaNiO2 derivatives constitute a new family of high -temperature superconductors, with the same structure as high-Tc cuprates but based on nickel, only showing superconductivity in thin films for now. We describe a strategy to stabilize LaNiO2 derivatives in bulk: the presence of Al at the octahedral sites helps to stabilize/anchor the infinite-layer structure. The reasons for the bulk being non -superconductors are hotly debated in the literature. An important question is whether there is some hydrogen incorporated into the structure during the reduction process from LaNiO3 to LaNiO2, predicted theoretically but not reported experimentally. Our neutron powder diffraction data show that, indeed, hydrogen occupies the centers of the Ni- O squares, and spectroscopic evidence from EELS and XAS suggests that Ni is reduced to the Ni+ oxidation state, consistent with the crystallochemical data.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Multiscale length structural investigation and thermoelectric performance of double-filled Sr_0.2Yb_0.2Co_4Sb_12 : an exceptional thermal conductivity reduction by filler segregation to the Grain boundaries

  • Serrano Sanchez, Federico
  • Rodrigues, Joao Elias
  • Gainza, Javier
  • Dejoie, Catherine
  • Dura, Oscar J.
  • Biskup Zaja, Nevenko
  • Nemes, Norbert Marcel
  • Martinez, Jose Luis
  • Alonso, Jose Antonio
Among thermoelectric materials, skutterudites are the most prominent candidates in the mid-temperature range applications. In the multiple-filled Sr0.2Yb0.2Co4Sb12 skutterudite, with Sr and Yb as fillers, we have enhanced the thermoelectric performance of CoSb3 through the reduction of lattice thermal conductivity and the optimization of carrier concentration and electrical conductivity. The high-pressure synthesis of the double-filled derivative promotes filling fraction fluctuation. This is observed by high angular resolution synchrotron X-ray diffraction, showing a phase segregation that corresponds to an inhomogeneous distribution of the filler atoms, located at the 2a positions of the cubic space group Im3. In addition, scanning transmission electron microscopy (STEM) combined with EELS spectroscopy clearly shows a segregation of Sr atoms from the surface of the grains, which is compatible with the synchrotron X-ray powder diffraction results. Mean square displacement parameters analysis results in Einstein temperatures of similar to 94 and similar to 67 K for Sr and Yb, respectively, and a Debye temperature of similar to 250 K. The strong effect on resonant and disorder scattering yields a significantly lower lattice thermal conductivity of 2.5 W m(-1) K-1 at 773 K. Still, good weighed-mobility values were obtained, with high filling fraction of the Yb and Sr elements. This drives a reduced electrical resistivity of 2.1 x 10(-5) Omega m, which leads to a peak zT of 0.26 at 773 K. The analysis and results performed for the synthesized (Sr,Yb)-double filled CoSb3, shed light on skutterudites for potential waste-heat recovery applications.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Stabilization of Infinite-Layer NdNi<sub>1–<i>x</i></sub>Al<sub><i>x</i></sub>O<sub>2</sub> nickelates containing monovalent Ni as bulk polycrystalline materials

  • Gainza, Javier
  • López, Carlos A.
  • Silva, Romualdo S.
  • Serrano Sánchez, Federico
  • Rodrigues, João Elias F. S.
  • Skorynina, Alina
  • Rosa, Angelika D.
  • Nemes, Norbert Marcel
  • Biskup Zaja, Nevenko
  • Fernández Díaz, María T.
  • Martínez, José Luis
  • Alonso, José Antonio
The series of RNiO2 (where R is a rare-earth element) oxides with infinite-layer structure constitutes a novel family of high-temperature superconductors, with the same structural framework as the well-known high-Tc cuprates but with Ni instead of Cu for the covalent matrix. Despite these similarities, superconductivity has only been described in nickelates in thin films, but its origin remains controversial, being associated either with a reduction of Ni or with the stress effect in the monolayer. In the present work, we have successfully synthesized infinite-layer bulk samples with nominal formulas NdNiO2 and NdNi0.9Al0.1O2+δ, by topotactic reduction from the corresponding “oxidized” perovskites with NdNi1–xAlxO3 (x = 0, 0.1) stoichiometry. We show that the substitution of 10% Al at the octahedral Ni positions contributes to the stabilization of the infinite-layer structure. Indeed, the topotactic removal of axial oxygen atoms on the [NiO6] octahedra leads to a chemical reduction of Ni3+ to Ni+ and thus, in the absence of unreducible Al atoms, to structural instabilities. Synchrotron X-ray diffraction (SXRD) data, collected after treatment at increasing temperatures and therefore increasingly reducing conditions, permitted us to unveil the structural evolution upon oxygen removal. Additional neutron diffraction measurements allowed the axial oxygen content to be assessed and revealed an almost monovalent oxidation state for Ni in the Al-containing sample. In addition, the neutron data evidenced the absence of occluded, long-range ordered hydrogen in the crystal structure, consistent with observations on LaNiO2 materials. Spectroscopic results from X-ray absorption spectroscopy (XAS) show that Ni ions are indeed reduced to the Ni+ oxidation state, in agreement with the crystallochemical data of NdNiO2. The local atomic structure around the Ni absorber was evaluated using the EXAFS technique and showed that Al doping enhances the rigidity of the Ni–O bonds and medium-range interactions within the Ni–Nd sublattice. Magnetic measurements could not provide evidence of superconductivity, as susceptibility is masked by the presence of tiny amounts of Ni metal.