Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

Docta Complutense
Publicación Artículo científico (JournalArticle)

Unveiling the structure–magnetism interplay in the ferrimagnetic pyrochlore Gd2CrSbO7 with significant cryo–magnetocaloric performance

  • Silva, R. S.
  • Rodrigues, J. E.
  • Santos, C.
  • Sahle, Ch
  • Serrano-Sánchez, F.
  • Andersen, H. L.
  • Gainza, J.
  • Skorynina, A.
  • Biskup Zaja, Nevenko
  • Nemes, Norbert Marcel
  • Passamani, E. C.
  • Martínez, J. L.
  • Ferreira, N. S.
  • Alonso, J. A.
Magnetic refrigeration is a promising and efficient cooling technology that uses the magnetocaloric effect (MCE), requiring particular materials with low heat capacity, low ordering temperature, and large magnetic moments for high performance. Here we report on Gd2CrSbO7, a mixed B-site pyrochlore oxide that exhibits a significant cryogenic MCE, driven by intricate 4f-3 d exchange interactions. Our combined experimental and theoretical investigation reveals that Gd2CrSbO7 crystallizes in a cubic pyrochlore structure (Fd3m) with ferrimagnetic (FiM) ordering, uniquely hosting a Griffiths-like phase and a Schottky anomaly arising from competing Cr-Cr short-range interactions and Gd crystal field effects. X-ray Raman spectroscopy confirms super-exchange interactions, while EXAFS analysis identifies enhanced Sb-O bond rigidity, influencing the material's stability. Notably, Gd2CrSbO7 achieves a remarkable maximum magnetic entropy change of -Delta SMmax\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$-\Delta {S}_{M}<^>{\max}$$\end{document} approximate to 21 J/kg K and refrigerant capacity of RC approximate to 430 J/kg (at 0-7 T), comparable to benchmark cryogenic refrigerants like Gd3Ga5O12, but containing substantially low-priced elements. These findings position Gd2CrSbO7 as a promising platform for next-generation magnetic cooling, while shedding light on emergent magnetic and electronic phenomena in pyrochlore oxides.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Incidence of the Brownian Relaxation Process on the Magnetic Properties of Ferrofluids

  • Vajtai, Lili
  • Nemes, N. M.
  • Morales, María Del Puerto
  • Molnár, Kolos
  • Pinke, Balázs Gábor
  • Simon, Ferenc
© 2024 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/)., Ferrofluids containing magnetic nanoparticles represent a special class of magnetic materials due to the added freedom of particle tumbling in the fluids. We studied this process, known as Brownian relaxation, and its effect on the magnetic properties of ferrofluids with controlled magnetite nanoparticle sizes. For small nanoparticles (below 10 nm diameter), the Néel process is expected to dominate the magnetic response, whereas for larger particles, Brownian relaxation becomes important. Temperature- and magnetic-field-dependent magnetization studies, differential scanning calorimetry, and AC susceptibility measurements were carried out for 6 and 13.5 nm diameter magnetite nanoparticles suspended in water. We identify clear fingerprints of Brownian relaxation for the sample of large-diameter nanoparticles as both magnetic and thermal hysteresis develop at the water freezing temperature, whereas the samples of small-diameter nanoparticles remain hysteresis-free down to the magnetic blocking temperature. This is supported by the temperature-dependent AC susceptibility measurements: above 273 K, the data show a low-frequency Debye peak, which is characteristic of Brownian relaxation. This peak vanishes below 273 K., This work was supported by the Hungarian National Research, Development and Innovation Office (NKFIH), grants 2022-2.1.1-NL-2022-00004, K137852, FK138501, and TKP 2021-NVA-04, the V4-Japan Joint Research Program (BGapEng, 2019-2.1.7-ERA-NET-2021-00028), and TED2021-129254B-C21 of the Spanish MCIN., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Valence Variability Induced in SrMoO₃ Perovskite by Mn Doping: Evaluation of a New Family of Anodes for Solid-Oxide Fuel Cells

  • Sánchez de Bustamante, Lucía
  • Silva, Romualdo S.
  • Martínez, J. L.
  • Fernández-Díaz, María Teresa
  • Aguadero, Ainara
  • Alonso, J. A.
We report on a series of SrMo1−xMnxO3−δ perovskite oxides designed as potential anode materials for solid oxide fuel cells (SOFCs). These materials were synthesized using a citrate method, yielding scheelite-type precursors with nominal SrMo1−xMnxO4 compositions, which were further reduced to obtain the active perovskite oxides. Their structural evolution was examined through X-ray diffraction (XRD) and neutron powder diffraction (NPD). These techniques provided insights into the crystallographic changes upon Mn doping, revealing key factors influencing ionic conductivity. Whereas the oxidized scheelite precursors are tetragonal, space group I41/a, the reduced perovskite specimens are cubic, space group Pm-3m, and show the conspicuous absence of oxygen vacancies, even at the highest temperature of 800 °C. The transport properties were analyzed through electrical conductivity measurements, exhibiting a metallic-like behavior. Thermogravimetric analysis (TGA) and dilatometry give insights into the thermal stability and expansion behavior, essential for SOFC operation. Test single SOFCs were built in an electrolyte-supported configuration, on LSGM pellets of 300 μm thickness, assessing the performance of the title materials as anodes. This work emphasizes the critical relationship between the crystal structure and its electrochemical behavior, providing a deeper understanding of how doping strategies can optimize fuel cell performance., This research was funded by the Spanish Ministry for Science and Innovation (MCIN/AEI/10.13039/501100011033) for their financial support of the following projects: PID2021-122477OB-I00, TED2021-129254B-C21, and TED2021-129254B-C22., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dual doping synergy: Optimizing SrMoO3 perovskite anodes via in-situ Ni exsolution and Cr doping for enhanced SOFC efficiency

  • Sánchez de Bustamante, Lucía
  • Aguadero, Ainara
  • Fernández-Díaz, M. T.
  • Santos Silva, Romualdo
  • Biskup, N.
  • Doménech Martínez, José Luis
  • Alonso, José Antonio
In this work, a family of SrMoO3 perovskites doped with equimolar amounts of Cr and Ni at the Mo position (SrMo1-xCrx/2Nix/2O3, x = 0.1, 0.2) was synthesised for their application as anodes in intermediate temperature solid-oxide fuel cells (IT-SOFCs). Whereas Cr doping is intended to favour the creation of oxygen vacancies in the perovskites, Ni atoms are exsolved from the perovskite crystal structure to the surface, thus favouring the electrocatalytic behaviour of the anodes. These materials have been synthesised by a sol-gel reaction and structurally characterised by laboratory X-ray diffraction (XRD), neutron powder diffraction (NPD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Additionally, physical properties such as thermal expansion behaviour, thermogravimetric analysis and electrical conductivity have been analysed and correlated to their electrochemical performance as anodes in SOFC mode, leading to maximum conductivities of 130 Scm−1 and cell performances of 862 mW/cm2 due to the synergistic action introduced by the enhanced mixed ionic and electronic conduction by Cr3+ doping at the Mo sites, and the in-situ exsolution of Ni nanoparticles that favours the electrocatalytic efficiency., We would like to express our gratitude to the Spanish Ministry for Science and Innovation (MCIN/AEI/10.13039/501100011033) for their financial support of the following projects: PID2021–122477OB-I00, PID2021–122980OB-C51, TED2021–129254B-C21 and TED​​​​​​​2021–129254B−C22. L.S. also wants to thank MCIN for granting the contract PRE2022–103236. The electron microscopy and spectroscopy was performed in the National Centre for Electron Microscopy in Madrid, in the framework of ICTS-ELECMI., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

From Oxidized PrNi0.9Al0.1O3to Reduced PrNi0.9Al0.1O2+δPerovskite Nickelates: Stabilization of Infinite-Layer Specimens with Monovalent Ni in the Bulk Polycrystalline Form

  • Gainza, Javier
  • López, C.A.
  • Silva, Romualdo S.
  • Rodrigues, J.E.F.S.
  • Serrano-Sánchez, Federico
  • Skorynina, A.
  • Nemes, N. M.
  • Fernández-Díaz, M.T.
  • Martínez, José L.
  • Alonso, J.A.
Recently, a new class of high-temperature superconductors, RNiO2(where R represents rare-earth elements) with infinite-layer (IL) structure, has been identified. They possess the same structural framework as the renowned high-Tccuprates but with nickel replacing copper as the central element. In this study, we successfully synthesized infinite-layer samples of PrNi0.9Al0.1O2+δin the bulk polycrystalline form through topotactic reduction of the PrNi0.9Al0.1O3orthorhombic perovskite, via treatment with CaH2. The incorporation of aluminum at the octahedral sites promotes the stabilization of bulk derivatives of the infinite-layer structure since unreduced [AlO6] octahedra keep the layers together and prevent their decomposition. The lack of superconductivity in bulk samples has been a subject of intense debate in recent literature. One major theoretical question concerns whether hydrogen becomes incorporated into the structure during the reduction from RNiO3to RNiO2─as suggested by theory. Here, we present neutron powder diffraction data demonstrating that hydride ions indeed reside within the IL lattice in samples of stoichiometry PrNi0.9Al0.1O2.10H0.16. Additional crystallographic analyses were carried out using temperature-dependent synchrotron X-ray diffraction on both reduced and oxidized phases. Furthermore, spectroscopic analysis via XAS and magnetometry confirms the reduction of Ni3+ to the Ni+ oxidation state, aligning with the crystallochemical evidence. © 2025 The Authors. Published by American Chemical Society, We sincerely appreciate the financial support provided by the Spanish Ministry for Science and Innovation (MCIN/AEI/10.13039/501100011033) through grants: PID2021- 122477OB-I00, TED2021-129254B-C21, PID2021- 122980OB-C51, and TED2021-129254B-C22. The authors also extend their gratitude to the Institut Laue-Langevin (ILL), the European Synchrotron Radiation Facility (Grenoble, France), and the ALBA Synchrotron Light Source (Cerdanyola del Vallès, Spain) for granting access to their facilities for neutron, synchrotron X-ray diffraction (experiment HC5191 and in-house research program), and X-ray absorption experiments (proposal number: 2023097812), respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetostructural coupling, Kondo-like behavior, and magnetocaloric performance in Fe-doped Nd0.5(Sr0.4Ba0.1)CoO3 perovskites

  • Silva, Romualdo S.
  • Serrano-Sánchez, Federico
  • Rodrigues, J.E.
  • Santos, C.
  • Attah-Baah, J.M.
  • dos Reis, R.D.
  • Doménech, José Luis
  • Alonso, J. A.
  • Ferreira, N.S.
We comprehensively studied the structural, electronic, magnetic, electrical, and magnetocaloric properties of A- and B-site co-doped polycrystalline perovskites Nd0.5(Sr0.4Ba0.1)Co1−xFexO3 (x = 0.0-0.2), which crystallize in a disordered orthorhombic phase with space group (62). Synchrotron X-ray diffraction (SXRD) analyses reveal stable valence states for Co and Fe ions across compositions, with progressive distortion of the [Co/Fe]O6 octahedral symmetry as the Fe content increases. Magnetic measurements indicate a decrease in the paramagnetic-ferromagnetic transition temperature (TC) from 211 K to 206 K, attributed to Fe3+/4+ ↔ Co2+/3+ random magnetic interactions. Temperature-dependent SXRD analysis shows anomalies in the volumetric coefficient of thermal expansion αV(T) and Uiso mean square displacement, correlating with the TC due to magnetoelastic coupling. The magnetocaloric effect (MCE) analysis reveals a second-order phase transition (SOFT) around TC with a maximum magnetic entropy change −ΔSmaxM of 2.03 J kg−1 K−1 and a relative cooling power (RCP) of approximately 226 J kg−1 for x = 0.12. The magnetic order exponents suggest long-range magnetic ordering. Furthermore, X-ray absorption near-edge structure spectroscopy (XANES) indicates consistent valence states for Co and Fe ions across all samples, with increased hybridization between Fe and O atoms due to Fe doping. The electrical resistivity analysis revealed metallic behavior with a notable upturn at ∼110 K, attributed to a localized-itinerant magnetism thermally driven, described by a Kondo-Bloch-Grüneisen type equation. These findings elucidate the role of Fe doping in modulating the structural, electronic, electric, and thermomagnetic properties of Nd0.5(Sr0.4Ba0.1)Co1−xFexO3, offering valuable insights into the underlying magnetic phase diagram of this perovskite system. © 2025 The Royal Society of Chemistry., We acknowledge the financial support of the Coordenação de Aperfeiçoamento de Pessoal de Nível Superior-CAPES (Finance Code-001), the Conselho Nacional de Desenvolvimento Científico e Tecnológico-CNPq (grant no. 309184/2022-3), and the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) to the research projects PID2021-122477OB-I00, TED2021-129254B-C21, and TED2021-129254B-C22. The authors are also grateful to the European Synchrotron Radiation Facility (ESRF) and the Brazilian Synchrotron Light Laboratory (LNLS) for making all the facilities available for SXRD [proposal MA-5866 in ID22] and XANES [proposal 20222183]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evaluating the photocatalytic potential of the lead-free double perovskite halide Cs2AgBiBr6 for rhodamine-B degradation

  • Martinelli, Brenda
  • Artigas dos Santos Laranjeira, José
  • Ücker, Cátia L.
  • Fabra, Giovanni M.N.
  • Rodrigues, J. E.
  • Silva, Romualdo S.
  • Alonso, J. A.
  • Sambrano, Julio Ricardo
  • Ferrer, Mateus M.
The 21st-century challenge is to discover materials for energy and environmental recovery. Metal halide perovskites are ideal for photovoltaic and optoelectronic applications due to their tunable bandgap, high absorption, broad spectrum, and charge mobility. Improving their properties involves structural characterization to link composition, atomic organization, and performance. Correlating theoretical and experimental results is essential for optimizing their applications. This study examines Cs2AgBiBr6, synthesized mechanochemically, for rhodamine-B photodegradation. Its structure, determined by synchrotron X-ray diffraction and electron microscopy, confirms a double perovskite with the Fm3m space-group. UV-Vis spectroscopy reveals a 2.8 eV (X→L) indirect band gap transition. Cs2AgBiBr6 achieved a 100 % rhodamine-B degradation in 75 minutes, indicating high photocatalytic efficiency. This highlights Cs2AgBiBr6’s versatility in photocatalytic and optoelectronic technologies., This work was supported by Brazilian funding agencies, including the Fundação de Amparo à Pesquisa do Estado do Rio Grande do Sul – FAPERGS (grant 23/2551–0000153–5), the National Council for Scientific and Technological Development – CNPq (grant 406160/2023–6, 307213/2021–8, 150187/2023–8, 314278/2023–0), and the Fundação de Amparo à Pesquisa do Estado de São Paulo – FAPESP (grant 22/03959–6, 22/16509–9, 20/01144–0). Additional support was provided by the Spanish Ministry for Science and Innovation (MCIN/AEI/10.13039/501100011033) through projects PID2021–122477OB-I00, TED2021–129254B-C22, and TED2021–129254B-C21., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structural Phase Transition and the Effect of Iodine on Phase Stability in Rb3Bi2Br9 Perovskite-Related Halides with 2D Dimensionality

  • Chakroun, Yousra
  • Cherif, W.
  • López, Carlos A.
  • Martinelli, Brenda
  • Rodrigues, Francielen S. M.
  • Serrano-Sánchez, Federico
  • Gainza, Javier
  • Silva, Romualdo S.
  • Ferrer, Mateus M.
  • Martínez, J. L.
  • Fernández-Díaz, M. T.
  • Rodrigues, J. E.
  • Alonso, J. A.
Rubidium-based halide perovskites Rb3Bi2Br9–xIx (x = 0, 3) represent a lead-free, low-dimensional alternative within the A3B2X9 family, offering promising optoelectronic properties. This work reports the successful synthesis of Rb3Bi2Br9 and Rb3Bi2Br6I3 via mechanochemical ball milling, yielding highly crystalline products. Structural characterization of Rb3Bi2Br9 halide, using synchrotron X-ray and neutron powder diffraction across a broad temperature range (295–656 K), revealed a reversible phase transition from a low-symmetry monoclinic (space group: P21/c) to a high-symmetry trigonal (space group: P3̅̅m1) phase at ∼450 K (both with a 2D dimensionality, concerning the connection of [BiBr6] octahedra). Thermal expansion coefficients, derived from unit-cell evolution, showed discontinuity across the structural phase transition. Symmetry-adapted distortion mode analysis identified octahedral tilting and rigid [BiBr6] framework rotations as the primary contributors to the monoclinic distortion, with minor and moderate contributions from stretching, bending, and Rb atoms translations. Optical characterization at room conditions (monoclinic phase) unveiled bandgaps of ∼2.70 and ∼2.21 eV for Rb3Bi2Br9 and Rb3Bi2Br6I3, respectively. Density functional theory (DFT) calculations corroborated the direct bandgap nature and electronic structure, highlighting the dominant Br and Bi orbital contributions. These results demonstrate the structural richness and optical tunability of Rb3Bi2Br9–xIx, establishing them as robust candidates for stable, lead-free optoelectronic applications., We acknowledge the financial support of the Spanish Ministry for Science and Innovation (MCIN/AEI/10.13039/501100011033) for granting the projects: PID2021-122477OB-I00, TED2021-129254B-C21, and TED2021-129254B-C22. CAL thanks UNSL, CONICET, and ANPCyT for financial support (project numbers PROICO 2-2320, PIP2972, and PICT2020A-2437, respectively). This work was also supported by the Brazilian funding agencies: Fundação de Amparo à Pesquisa do Estado do Rio Grande do Sul (FAPERGS, grant no. 23/2551-0000153-5), the National Council for Scientific and Technological Development (CNPq, grant nos. 406160/2023-6, 307213/2021-8, 150187/2023-8, 314278/2023-0, 2021 3072132021-8), and Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP, grant nos. 22/03959-6, 22/16509-9, and 20/01144-0). The authors wish to express their gratitude to ALBA Synchrotron Light Source, European Synchrotron Radiation Facility (experiment HC-5818), (71) and Institut Laue-Langevin technical staff for making the facilities available for the synchrotron X-ray and neutron powder diffraction experiments., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis and in-depth interfacial characterization of 2D electron gases formed in Si3N4/Al//KTaO3 heterostructures

  • Martínez, E. A.
  • Lucero, A. M.
  • Cantero, E. D.
  • Biskup, N.
  • Orte, A.
  • Sánchez, E. A.
  • Romera, M.
  • Nemes, N. M.
  • Martínez, José L.
  • Varela, M.
  • O. Grizzi
  • Bruno, Flavio Y.
The two-dimensional electron gas (2DEG) found in KTaO3-based interfaces has garnered attention due to its remarkable electronic properties. In this study, we investigated the conducting system embedded at the Si3N4/Al//KTO(110) heterostructure. We demonstrate that the Al/KTO interface supports a conducting system, with the Si3N4 passivation layer acting as a barrier to oxygen diffusion, enabling ex-situ characterization. Our findings reveal that the mobility and carrier density of the system can be tuned by varying the Al layer thickness. Using scanning transmission electron microscopy, electron energy-loss spectroscopy, X-ray photoemission spectroscopy, and time-of-flight secondary ion mass spectrometry, we characterized the structural and chemical composition of the interface. We found that the Al layer fully oxidizes into AlOx, drawing oxygen from the KTaO3 substrate. The oxygen depletion zone extends 3–5 nm into the substrate and correlates to the Al thickness. Heterostructures with thicker Al layers exhibit higher carrier densities but lower mobilities, likely due to interactions with the oxygen vacancies that act as scattering centers. These findings highlight the importance of considering the effect and extent of the oxygen depletion zone when designing and modeling two-dimensional electron systems in complex oxides., This work has been supported by: Comunidad de Madrid (Atracción de Talento grant No. 2022-5A/IND-24230 and MAD2D-CM-UCM3), grant CNS2022-135485 funded by MCIN/AEI/ 10.13039/501100011033 and European Union NextGeneration EU/PRTR, grant from MICINN FEDER PID2021-122980OB-C51, TED2021-129254B-C21 and TED2021-129254B-C22, grants 06/C025-T1 funded by Universidad Nacional de Cuyo, and PIP 11220210100411CO founded by CONICET. E.A.M. acknowledges funding from the European Union (NextGenerationEU), under the Italian Ministry of University and Research (MUR), National Recovery and Resilience Plan (NRRP) grant - TOTEM - CUP E53D23001710006., Peer reviewed
Docta Complutense
Publicación Artículo científico (JournalArticle)

Evidence of hydrogen content and monovalent Ni oxidation state in non-superconducting bulk anchored infinite-layer nickelates

  • Gainza, Javier
  • Lopez, Carlos A.
  • Serrano Sanchez, Federico
  • Rodrigues, João Elias F. S.
  • Rosa, Angelika D.
  • Sobrados, Maria Isabel
  • Nemes, Norbert Marcel
  • Biskup Zaja, Nevenko
  • Fernández-Díaz, María Teresa
  • Martinez, Jose Luis
  • Alonso, Jose Antonio
Since superconductivity was first reported in nickelate thin films, many studies have been published about this family of materials, and different hypotheses have been proposed for explaining the mechanisms and structural dependence. Here, we report the synthesis of anchored infinite-layer LaNi0.9Al0.1O2.1 and its hole-doped derivatives by topotactic reduction from La1_xSrxNi0.9Al0.1O3 rhombohedral perovskites. LaNiO2 derivatives constitute a new family of high -temperature superconductors, with the same structure as high-Tc cuprates but based on nickel, only showing superconductivity in thin films for now. We describe a strategy to stabilize LaNiO2 derivatives in bulk: the presence of Al at the octahedral sites helps to stabilize/anchor the infinite-layer structure. The reasons for the bulk being non -superconductors are hotly debated in the literature. An important question is whether there is some hydrogen incorporated into the structure during the reduction process from LaNiO3 to LaNiO2, predicted theoretically but not reported experimentally. Our neutron powder diffraction data show that, indeed, hydrogen occupies the centers of the Ni- O squares, and spectroscopic evidence from EELS and XAS suggests that Ni is reduced to the Ni+ oxidation state, consistent with the crystallochemical data.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Automated atomic site determination by four-dimensional scanning transmission electron microscopy data analytics

  • Fernández Cañizares, Francisco
  • Rodríguez Vázquez, Javier
  • Veloso Ferreira, Rafael
  • Tenreiro Villar, Isabel
  • Rivera Calzada, Alberto Carlos
  • Fernando Saavedra, Amalia
  • Sánchez García, Miguel A.
  • Xie, Yong
  • Castellanos Gómez, Andrés
  • Varela Del Arco, María
  • Sánchez Santolino, Gabriel
Automated atomic column detection and identification constitutes an active open front in advanced scanning transmission electron microscopy techniques. In this work we use clustering algorithms in combination with dimensionality reduction techniques to identify specific columns in a series of very different cutting-edge materials, ranging from ultrathin 2D materials to bulk semiconductors or complex oxides, which include different types of columns (heavy and light), and thus pose a challenge towards automated detection. By implementing a three-stage cascaded clustering pipeline, we are able to automatically identify all atomic column sites of our test materials and resolve them from the background interatomic space. This approach could enable new data-driven in-depth analysis of materials, allowing the automatic detection of chemical and structural characteristics of materials.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Electronic transport properties and stability of 2D electron gases on Si3N4/AlOx//KTaO3 heterostructures

  • Santos Solva Junior, Romualdo
  • Martín Merodio, Alejandro
  • Martínez, E. A.
  • Gallego Toledo, Fernando
  • Nemes, Norbert Marcel
  • Bruno, Flavio Yair
We report on the successful stabilization of a two-dimensional electron gas (2DEG) in Si3N4/AlOx//KTaO3(001) heterostructures. Electronic transport measurements reveal that the AlOx layer thickness critically modulates the 2DEG mobility, with an optimal thickness achieving a mobility of μ ≈ 444 cm2 V−1 s−1 at 10 K, which is, despite the amorphous granular nature of the AlOx layers, comparable to epitaxial oxide-based 2DEGs. Thicker AlOx layers reduce mobility and induce a Kondo-like upturn in resistance at low temperatures, which is attributed to oxygen depletion extending into the substrate and enhancing defect scattering. Additionally, the samples remain metallic after six months of exposure to ambient conditions, with high-mobility samples maintaining stable carrier densities and mobilities and experiencing only minor increases in sheet resistance over time. These findings highlight the potential of KTaO3 2DEGs for long-term electronic applications, providing valuable insights for optimizing oxide heterostructures for future device technologies.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Multiscale length structural investigation and thermoelectric performance of double-filled Sr_0.2Yb_0.2Co_4Sb_12 : an exceptional thermal conductivity reduction by filler segregation to the Grain boundaries

  • Serrano Sanchez, Federico
  • Rodrigues, Joao Elias
  • Gainza, Javier
  • Dejoie, Catherine
  • Dura, Oscar J.
  • Biskup Zaja, Nevenko
  • Nemes, Norbert Marcel
  • Martinez, Jose Luis
  • Alonso, Jose Antonio
Among thermoelectric materials, skutterudites are the most prominent candidates in the mid-temperature range applications. In the multiple-filled Sr0.2Yb0.2Co4Sb12 skutterudite, with Sr and Yb as fillers, we have enhanced the thermoelectric performance of CoSb3 through the reduction of lattice thermal conductivity and the optimization of carrier concentration and electrical conductivity. The high-pressure synthesis of the double-filled derivative promotes filling fraction fluctuation. This is observed by high angular resolution synchrotron X-ray diffraction, showing a phase segregation that corresponds to an inhomogeneous distribution of the filler atoms, located at the 2a positions of the cubic space group Im3. In addition, scanning transmission electron microscopy (STEM) combined with EELS spectroscopy clearly shows a segregation of Sr atoms from the surface of the grains, which is compatible with the synchrotron X-ray powder diffraction results. Mean square displacement parameters analysis results in Einstein temperatures of similar to 94 and similar to 67 K for Sr and Yb, respectively, and a Debye temperature of similar to 250 K. The strong effect on resonant and disorder scattering yields a significantly lower lattice thermal conductivity of 2.5 W m(-1) K-1 at 773 K. Still, good weighed-mobility values were obtained, with high filling fraction of the Yb and Sr elements. This drives a reduced electrical resistivity of 2.1 x 10(-5) Omega m, which leads to a peak zT of 0.26 at 773 K. The analysis and results performed for the synthesized (Sr,Yb)-double filled CoSb3, shed light on skutterudites for potential waste-heat recovery applications.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Stabilization of Infinite-Layer NdNi<sub>1–<i>x</i></sub>Al<sub><i>x</i></sub>O<sub>2</sub> nickelates containing monovalent Ni as bulk polycrystalline materials

  • Gainza, Javier
  • López, Carlos A.
  • Silva, Romualdo S.
  • Serrano Sánchez, Federico
  • Rodrigues, João Elias F. S.
  • Skorynina, Alina
  • Rosa, Angelika D.
  • Nemes, Norbert Marcel
  • Biskup Zaja, Nevenko
  • Fernández Díaz, María T.
  • Martínez, José Luis
  • Alonso, José Antonio
The series of RNiO2 (where R is a rare-earth element) oxides with infinite-layer structure constitutes a novel family of high-temperature superconductors, with the same structural framework as the well-known high-Tc cuprates but with Ni instead of Cu for the covalent matrix. Despite these similarities, superconductivity has only been described in nickelates in thin films, but its origin remains controversial, being associated either with a reduction of Ni or with the stress effect in the monolayer. In the present work, we have successfully synthesized infinite-layer bulk samples with nominal formulas NdNiO2 and NdNi0.9Al0.1O2+δ, by topotactic reduction from the corresponding “oxidized” perovskites with NdNi1–xAlxO3 (x = 0, 0.1) stoichiometry. We show that the substitution of 10% Al at the octahedral Ni positions contributes to the stabilization of the infinite-layer structure. Indeed, the topotactic removal of axial oxygen atoms on the [NiO6] octahedra leads to a chemical reduction of Ni3+ to Ni+ and thus, in the absence of unreducible Al atoms, to structural instabilities. Synchrotron X-ray diffraction (SXRD) data, collected after treatment at increasing temperatures and therefore increasingly reducing conditions, permitted us to unveil the structural evolution upon oxygen removal. Additional neutron diffraction measurements allowed the axial oxygen content to be assessed and revealed an almost monovalent oxidation state for Ni in the Al-containing sample. In addition, the neutron data evidenced the absence of occluded, long-range ordered hydrogen in the crystal structure, consistent with observations on LaNiO2 materials. Spectroscopic results from X-ray absorption spectroscopy (XAS) show that Ni ions are indeed reduced to the Ni+ oxidation state, in agreement with the crystallochemical data of NdNiO2. The local atomic structure around the Ni absorber was evaluated using the EXAFS technique and showed that Al doping enhances the rigidity of the Ni–O bonds and medium-range interactions within the Ni–Nd sublattice. Magnetic measurements could not provide evidence of superconductivity, as susceptibility is masked by the presence of tiny amounts of Ni metal.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Atomistic mechanisms triggered by Joule heating effects in metallic Cu-Bi nanowires for spintronics

  • Guedeja-Marrón Gil, Alejandra
  • Beltrán Fínez, Juan Ignacio
  • Saura Múzquiz, Matilde
  • Perna, Paolo
  • Muñoz de Pablo, Maria del Carmen
  • Pérez García, Lucas
  • Varela Del Arco, María
Joule heating may severely impact the response to electric current injection of nanomaterials for spintronics. Here, the effects of heating in Bi doped Cu nanowires, a system where 1% Bi doping promotes a giant spin Hall effect (SHE), are studied by in situ high resolution electron microscopy. High quality Bi-Cu nanowires are grown by room temperature electrodeposition. The large size of Bi cations precludes insertion into the dense Cu face-centered lattice. Still, homogeneous compositions up to a nominal 7% Bi are successfully obtained with thicknesses <100 nm and grain sizes in the micron longitudinal scale, coated by a native oxide. In situ injection of current promotes fast Bi segregation out of solution. Controlled in situ annealing shows that the onset for segregation starts above temperatures of 250 °C. Within minutes, Bi atoms diffuse to grain boundaries or to exposed surfaces, such as the nanowire tips. Monoatomic thick Bi ordered decorations appear, preferentially on surface planes of the (Formula presented.) type. Annealing at 400 °C promotes the growth of pure Bi nanocrystals, coherent with the underlying Cu matrix. Still, the intra-grain Bi concentration remains finite at values near 1%. Density-functional theory calculations show that small amounts of Bi atoms are stable as substitutional impurities, confirming the potential of this system as building block for future spintronic devices.