Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetron Sputtered Low-Platinum Loading Electrode as HER Catalyst for PEM Electrolysis

  • Villamayor, Antía
  • Alba, Alonso
  • Barrio, Laura V.
  • Rojas Muñoz, Sergio
  • Gutiérrez Berasategui, Eva
The development of cost-effective components for Proton Exchange Membrane (PEM) electrolyzers plays a crucial role in the transformation of renewable energy into hydrogen. To achieve this goal, two main issues should be addressed: reducing the Platinum Group Metal (PGM) content present on the electrodes and finding a large-scale electrode manufacturing method. Magnetron sputtering could solve these hurdles since it allows the production of highly pure thin films in a single-step process and is a well-established industrial and automated technique for thin film deposition. In this work, we have developed an ultra-low 0.1 mg cm−2 Pt loading electrode using magnetron sputtering gas aggregation method (MSGA), directly depositing the Pt nanoparticles on top of the carbon substrate, followed by a complete evaluation of the electrochemical properties of the sputtered electrode. These ultra-low Pt content electrodes have been thoroughly characterized and tested in a real electrolyzer cell. They demonstrate similar efficiency to commercial electrodes with a Pt content of 0.3 mg/cm2, achieving a 67% reduction in Pt loading. Additionally, durability tests indicate that these electrodes offer greater stability compared to their commercial counterparts. Thus, magnetron sputtering has been proven as a promising technology for manufacturing optimum high-performance electrodes at an industrial scale., This work was supported by the H2PLAN project funded by MCIN and Basque Government with funding from European Union NextGenerationEU (PRTR-C17.I1). Spanish grants PID2020-116712RB-C21 and TED2021-131033B–I00 from MCIN/AEI/10.13039/501100011033 are also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dy2NiRuO6 perovskite with high activity and durability for the oxygen evolution reaction in acidic electrolyte

  • Rodríguez García, Isabel
  • Gómez de la Fuente, José Luis
  • Galyamin, Dmitry
  • Tolosana-Moranchel, Álvaro
  • Kayser, Paula
  • Salam, Mohamed Abdel
  • Alonso, José Antonio
  • Calle-Vallejo, Federico
  • Rojas Muñoz, Sergio
  • Retuerto, María
Ru mixed oxides may be suitable materials to replace state-of-the-art Ir-based catalysts in the anode of proton exchange membrane electrolyzers. To do this, the activity and especially the durability of Ru for the oxygen evolution reaction (OER) in acidic electrolyte should be improved. This work reports a family of Ru-based perovskites that combines both high activity and durability for the OER in acidic electrolyte. R2NiRuO6 double perovskites with R3+ = Pr3+, Nd3+, Tb3+, Dy3+, Y3+, Ho3+ and Er3+, and with Ni2+ and Ru4+ occupying B and B′ positions have been synthesized and evaluated for the OER in acidic electrolyte. The OER activities of R2NiRuO6 mixed oxides depend on the nature of R3+, with Dy2NiRuO6 displaying the highest activity (1.507 V at 10 mA cm−2) and being stable for more than 400 consecutive OER cycles measured at a slow scan rate. Characterization data indicate that the shorter Ru-O bonds in Dy2NiRuO6 are beneficial for the OER performance compared to the rest of the series. Computational modelling shows that Ru sites at pristine Dy2NiRuO6 are highly active for the OER, and their activity increases slightly upon Dy dissolution and progressively decreases as the local ratio of Ni to Ru is lowered., This work was funded by the PROMET-H2 project from the European Union Horizon 2020 research and innovation programme under grant agreement No. 862253; also, by the Deputyship for Research & Innovation, Ministry of Education of Saudi Arabia for the project number 341; and by the Spanish grants TED2021-131033B-I00, TED2021-132550B-C21, PID2020-116712RB-C21, PID2021-122477OB-I00 and PID2021-127957NB-I00 from MCIN/AEI/10.13039/501100011033. A. T.-M. thanks the Consejería de Educación, Juventud y Deporte of the Comunidad de Madrid for the Ayuda Destinada a la Atracción de Talento Investigador (2020-T2/AMB-19927). I. R.-G. thanks the PhD Program in Electroquímica, Ciencia y Tecnología of Escuela de doctorado of Universidad Autónoma de Madrid. FCV also acknowledges financial support through grant IT1453-22 “Grupos Consolidados UPV/EHU del Gobierno Vasco” and thanks the Red Española de Supercomputación for computational resources (grant QHS-2023-3-0019). The use of supercomputing facilities at SURFsara was sponsored by NWO Physical Sciences, with financial support by NWO., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

NdMn1.5Ru0.5O5, a high-performance electrocatalyst with low Ru content for acidic oxygen evolution reaction

  • Rodríguez García, Isabel
  • Gómez de la Fuente, José Luis
  • Torrero, Jorge
  • García Sánchez, Daniel
  • Abdel Salam, M.
  • Alonso, José Antonio
  • Gago, Aldo Saul
  • Friedrich, Kaspar Andreas
  • Rojas Muñoz, Sergio
  • Retuerto, María
  • Tolosana-Moranchel, Álvaro
A mixed oxide with the crystal structure of the DyMn2O5 family, namely NdMn1.5Ru0.5O5, is reported active for the oxygen evolution reaction (OER) in acidic media. NdMn1.5Ru0.5O5 displays high OER activity of 500 A gRu−1 at 1.5 V. Moreover, is more stable than most Ru oxides reported to date, remaining active for more than 500 cycles between 1.1. and 1.7 V at low scan rate of 10 mV s−1. The high activity and stability are attributed to the Ru cations, as NdMn2O5 exhibits very low OER activity. NdMn1.5Ru0.5O5 has particularly short Ru–Ru distances of 2.60 Å, a value close to the Ru–Ru metallic distances around 2.642 Å. The high activity and durability of NdMn1.5Ru0.5O5 for the OER are also demonstrated in a proton exchange membrane water electrolysis cell by producing a low-loaded anode electrode with 0.5 mgRucm−2. The cell achieves 1.97 V at 0.5 A cm−2, consistent with the performances reported for Ru-based catalysts but with lower Ru loading. This performance is maintained during 100 h of operation. Additionally, NdMn1.5Ru0.5O5 displays visible ORR activity in acidic media, recording an onset potential of 0.85 V at 0.1 mA cm−2. It is noteworthy to highlight the extreme rarity of bifunctional ORR/OER catalysts acidic media., This work was funded by PROMET-H2 project from the European Union's Horizon 2020 research and innovation programme under grant agreement No 862253; also, by the Deputyship for Research & Innovation, Ministry of Education of Saudi Arabia for the project number 341; and by the Spanish grants PID2020-116712RB-C21, PID2021-122477OB-I00 and TED2021-131033B–I00 from MCIN/AEI/10.13039/501100011033. A. T-M thanks the Consejería de Educación, Juventud y Deporte of the Comunidad de Madrid for the Ayuda Destinada a la Atracción de Talento Investigador (2020-T2/AMB-19927). I. R-G thanks the PhD Program in Electroquímica, Ciencia y Tecnología of Escuela de doctorado of Universidad Autónoma de Madrid., Peer reviewed