Pasar al contenido principal

DESARROLLO DE CATALIZADORES SIN METALES CRITICOS COMO ELECTRODOS EN BATERIAS, PILAS DE COMBUSTIBLE Y ELECTROLIZADORES

PID2020-116712RB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metal-doped imine frameworks for the oxygen reduction reaction in acidic media

  • Tolosana-Moranchel, Álvaro
  • López-García, Álvaro
  • García-Corral, Álvaro
  • Marco, J.F.
  • Pascual, L.
  • Liuzzi, Dalia
  • Salam, Mohamed A.
  • Ferrer, Pilar
  • Torrero, Jorge
  • Grinter, David C.
  • Held, Georg
  • García Sánchez, Daniel
  • Friedrich, K. Andreas
  • Retuerto, María
  • Rojas, Sergio
11 pags., 7 figs., 2 tabs., The overall performance of proton exchange membrane fuel cells is limited by the sluggish kinetics of the oxygen-reduction reaction (ORR). Among the most active PGM-free ORR electrocatalysts are metal-nitrogen-carbon (M-N-C), such as Fe–N–C. The Fe–N4 ensembles in these PGM-free catalysts, present in different configurations, are proposed to be the active sites for the ORR in acid. In this work, we have synthesized a Fe/N/C catalyst via thermal treatment of a polymeric CxNy precursor obtained by the wet-polymerization of melamine (a nitrogen rich molecule) and terephthaldehyde. The materials obtained (Im-FeNC-1HT and Im-FeNC-2HT) display high ORR activity in acid electrolyte compared to other Fe–N–C catalysts prepared with precursors different than 2-methylimidazole or ZIF-8. Characterization data indicate the formation of high- and low-spin Fe-Nx ensembles, with a site density of 4.4·1019 sitesFe·g−1 estimated by electrochemical stripping of NO. The ORR activity was evaluated in a RRDE configuration in 0.1 M HClO4 and in MEA configuration in a single cell., Financial support from PID2020-116712RB-C21 funded by MCIN/AEI/10.13039/501100011033 is acknowledged. The Deputyship for Research & Innovation, Ministry of Education of Saudi Arabia is acknowledged for funding this research work through the project number 341. We also thank the Consejería de Educación, Juventud y Deporte of the Comunidad de Madrid for the Ayuda Destinada a la Atracción de Talento Investigador (2020-T2/AMB-19927) granted to Álvaro Tolosana Moranchel. The single-cell testing was possible thanks to the Margarita Salas grant (REGAGE21e00017738309) given to Álvaro García Corral, distributed by the Spanish Ministry of Universities in the frame of the NextGenerationEU program. This work was carried out with the support of Diamond Light Source, Beamline B07 B branch (proposal SI30338)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Insights into the High Activity of Ruthenium Phosphide for the Production of Hydrogen in Proton Exchange Membrane Water Electrolyzers

  • Galyamin, Dmitry
  • Torrero, Jorge
  • Elliott, J.D.
  • García Rodríguez, M. Isabel
  • Sánchez, D.G.
  • Salam, M.A.
  • Gago, A.S.
  • Mokhtar, M.
  • Gómez de la Fuente, José Luis
  • Bueno, Samba Violeta
  • Gianolio, D.
  • Ferrer, Pilar
  • Grinter, D.C.
  • Held, G.
  • Retuerto, María
  • Rojas Muñoz, Sergio
The demand of green hydrogen, that is, the hydrogen produced from water electrolysis, is expected to increase dramatically in the coming years. State-of-the-art proton exchange membrane water electrolysis (PEMWE) uses high loadings of platinum group metals, such as Pt in the electrode where hydrogen is produced. Alternative electrodes based on phosphides, sulfides, nitrides, and other low-cost alternatives are under investigation. Herein, a simple process for the preparation of RuP electrodes with high activity for the hydrogen evolution reaction (HER) in acidic electrolyte is described. A straightforward one-pot synthesis that yields RuP nanoparticles with fine-tuned composition and stoichiometry is presented, as determined by multiple characterization techniques, including lab- and synchrotron-based experiments and theoretical modeling. The RuP nanoparticles exhibit a high activity of 10 mA cm−2 at 36 mV overpotential and a Tafel slope of 30 mV dec−1, which is comparable to Pt/C. Moreover, a RuP catalyst-coated membrane (CCM) with a low Ru loading of 0.6 mgRu cm−2 is produced and tested in a PEMWE cell configuration, yielding 1.7 A cm−2 at 2 V. © 2023 The Authors. Advanced Energy and Sustainability Research published by Wiley-VCH GmbH., The authors acknowledge the PROMET-H2 project. This project received funding from the European Union Horizon 2020 research and innovation programme under grant agreement no. 862253. The Deputyship for Research & Innovation, Ministry of Education of Saudi Arabia, is acknowl edged for funding this research work through the project number 341. The authors also acknowledge financial support from grants TED2021- 131033B-I00, PID2020-116712RB-C21, and PID2019-103967RJ-I00 funded by MCIN/AEI/10.13039/501100011033. Computing resources for this work were provided by STFC scientific computing departments of the SCARF cluster. J.T. wishes to acknowledge the Deutsche Akademische Austausch Dienst (DAAD), scholarship code number 57540124. The authors acknowledge Diamond Light Source for time on the VerSoX B07-B beamline under the commissioning proposal cm-28150, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Laser driven generation of single atom Fe-N-C catalysts for the oxygen reduction reaction

  • Madrid, Ainhoa
  • Tolosana-Moranchel, Álvaro
  • García, Álvaro
  • Rojas Muñoz, Sergio
  • Bartolomé, Fernando
  • Pakrieva, Ekaterina
  • Simonelli, Laura
  • Martínez, Gema
  • Hueso, José L.
  • Santamaría, Jesús
Single-Atom Catalysts (SACs) have emerged as the ultimate solutions in challenging systems bridging the gap between homogeneous and heterogeneous catalysts. However, feasible synthesis methods are necessary to stabilize single metal atoms, increase catalyst loadings and scale up the synthesis. Due to its sluggish kinetics, the oxygen reduction reaction (ORR) is the main source of irreversibility in proton exchange membrane fuel cells (PEMFC). The most promising candidates to replace Pt-based catalysts for the ORR in fuel cells are the so-called Fe-N/C catalysts. These catalysts display high ORR activity in acidic and alkaline electrolytes. In this work, we propose a laser-driven pyrolysis approach to generate Fe-N/C SACs that involves decomposition of aerosolized iron-phthalocyanines. The resulting catalyst displays ORR activity in acidic and alkaline electrolytes, with competitive half-potential and kinetic current density values in comparison with state-of-the-art electrocatalysts., The authors thank funding from the Spanish Research Agency and MICN/AEI (projects PID2020-114926RB-I00, CNS2022-135911 and PID2020-115159 GB-I00) and from CIBER-BBN and the Government of Aragon (Group T57_23R). Financial support from PID2020-116712RB-C21 funded by MCIN/AEI/10.13039/501100011033 is also acknowledged. We also thank the Consejería de Educación, Juventud y Deporte of the Comunidad de Madrid for the Ayuda Destinada a la Atracción de Talento Investigador (2020-T2/AMB-19927) granted to Álvaro Tolosana Moranchel. The Deputyship for Research & Innovation, Ministry of Education of Saudi Arabia for the project number 341 is also acknowledged. The synthesis of materials has been performed by the Platform of Production of Biomaterials and Nanoparticles of the NANOBIOSIS ICTS, more specifically by the Nanoparticle Synthesis Unit (Unit 9) of the CIBER in Bioengineering, Biomaterials & Nanomedicine (CIBER-BBN). The TEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia y Materiales de Aragon, Universidad de Zaragoza, Spain. The XAS experiments were performed at the CLAESS beamline of the ALBA synchrotron (proposal number 2022097042) with the support of the ALBA staff. Ayuda CEX2023-001286-S financiada por MICIU/AEI /10.13039/501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetron Sputtered Low-Platinum Loading Electrode as HER Catalyst for PEM Electrolysis

  • Villamayor, Antía
  • Alba, Alonso
  • Barrio, Laura V.
  • Rojas Muñoz, Sergio
  • Gutiérrez Berasategui, Eva
The development of cost-effective components for Proton Exchange Membrane (PEM) electrolyzers plays a crucial role in the transformation of renewable energy into hydrogen. To achieve this goal, two main issues should be addressed: reducing the Platinum Group Metal (PGM) content present on the electrodes and finding a large-scale electrode manufacturing method. Magnetron sputtering could solve these hurdles since it allows the production of highly pure thin films in a single-step process and is a well-established industrial and automated technique for thin film deposition. In this work, we have developed an ultra-low 0.1 mg cm−2 Pt loading electrode using magnetron sputtering gas aggregation method (MSGA), directly depositing the Pt nanoparticles on top of the carbon substrate, followed by a complete evaluation of the electrochemical properties of the sputtered electrode. These ultra-low Pt content electrodes have been thoroughly characterized and tested in a real electrolyzer cell. They demonstrate similar efficiency to commercial electrodes with a Pt content of 0.3 mg/cm2, achieving a 67% reduction in Pt loading. Additionally, durability tests indicate that these electrodes offer greater stability compared to their commercial counterparts. Thus, magnetron sputtering has been proven as a promising technology for manufacturing optimum high-performance electrodes at an industrial scale., This work was supported by the H2PLAN project funded by MCIN and Basque Government with funding from European Union NextGenerationEU (PRTR-C17.I1). Spanish grants PID2020-116712RB-C21 and TED2021-131033B–I00 from MCIN/AEI/10.13039/501100011033 are also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dy2NiRuO6 perovskite with high activity and durability for the oxygen evolution reaction in acidic electrolyte

  • Rodríguez García, Isabel
  • Gómez de la Fuente, José Luis
  • Galyamin, Dmitry
  • Tolosana-Moranchel, Álvaro
  • Kayser, Paula
  • Salam, Mohamed Abdel
  • Alonso, José Antonio
  • Calle-Vallejo, Federico
  • Rojas Muñoz, Sergio
  • Retuerto, María
Ru mixed oxides may be suitable materials to replace state-of-the-art Ir-based catalysts in the anode of proton exchange membrane electrolyzers. To do this, the activity and especially the durability of Ru for the oxygen evolution reaction (OER) in acidic electrolyte should be improved. This work reports a family of Ru-based perovskites that combines both high activity and durability for the OER in acidic electrolyte. R2NiRuO6 double perovskites with R3+ = Pr3+, Nd3+, Tb3+, Dy3+, Y3+, Ho3+ and Er3+, and with Ni2+ and Ru4+ occupying B and B′ positions have been synthesized and evaluated for the OER in acidic electrolyte. The OER activities of R2NiRuO6 mixed oxides depend on the nature of R3+, with Dy2NiRuO6 displaying the highest activity (1.507 V at 10 mA cm−2) and being stable for more than 400 consecutive OER cycles measured at a slow scan rate. Characterization data indicate that the shorter Ru-O bonds in Dy2NiRuO6 are beneficial for the OER performance compared to the rest of the series. Computational modelling shows that Ru sites at pristine Dy2NiRuO6 are highly active for the OER, and their activity increases slightly upon Dy dissolution and progressively decreases as the local ratio of Ni to Ru is lowered., This work was funded by the PROMET-H2 project from the European Union Horizon 2020 research and innovation programme under grant agreement No. 862253; also, by the Deputyship for Research & Innovation, Ministry of Education of Saudi Arabia for the project number 341; and by the Spanish grants TED2021-131033B-I00, TED2021-132550B-C21, PID2020-116712RB-C21, PID2021-122477OB-I00 and PID2021-127957NB-I00 from MCIN/AEI/10.13039/501100011033. A. T.-M. thanks the Consejería de Educación, Juventud y Deporte of the Comunidad de Madrid for the Ayuda Destinada a la Atracción de Talento Investigador (2020-T2/AMB-19927). I. R.-G. thanks the PhD Program in Electroquímica, Ciencia y Tecnología of Escuela de doctorado of Universidad Autónoma de Madrid. FCV also acknowledges financial support through grant IT1453-22 “Grupos Consolidados UPV/EHU del Gobierno Vasco” and thanks the Red Española de Supercomputación for computational resources (grant QHS-2023-3-0019). The use of supercomputing facilities at SURFsara was sponsored by NWO Physical Sciences, with financial support by NWO., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

NdMn1.5Ru0.5O5, a high-performance electrocatalyst with low Ru content for acidic oxygen evolution reaction

  • Rodríguez García, Isabel
  • Gómez de la Fuente, José Luis
  • Torrero, Jorge
  • García Sánchez, Daniel
  • Abdel Salam, M.
  • Alonso, José Antonio
  • Gago, Aldo Saul
  • Friedrich, Kaspar Andreas
  • Rojas Muñoz, Sergio
  • Retuerto, María
  • Tolosana-Moranchel, Álvaro
A mixed oxide with the crystal structure of the DyMn2O5 family, namely NdMn1.5Ru0.5O5, is reported active for the oxygen evolution reaction (OER) in acidic media. NdMn1.5Ru0.5O5 displays high OER activity of 500 A gRu−1 at 1.5 V. Moreover, is more stable than most Ru oxides reported to date, remaining active for more than 500 cycles between 1.1. and 1.7 V at low scan rate of 10 mV s−1. The high activity and stability are attributed to the Ru cations, as NdMn2O5 exhibits very low OER activity. NdMn1.5Ru0.5O5 has particularly short Ru–Ru distances of 2.60 Å, a value close to the Ru–Ru metallic distances around 2.642 Å. The high activity and durability of NdMn1.5Ru0.5O5 for the OER are also demonstrated in a proton exchange membrane water electrolysis cell by producing a low-loaded anode electrode with 0.5 mgRucm−2. The cell achieves 1.97 V at 0.5 A cm−2, consistent with the performances reported for Ru-based catalysts but with lower Ru loading. This performance is maintained during 100 h of operation. Additionally, NdMn1.5Ru0.5O5 displays visible ORR activity in acidic media, recording an onset potential of 0.85 V at 0.1 mA cm−2. It is noteworthy to highlight the extreme rarity of bifunctional ORR/OER catalysts acidic media., This work was funded by PROMET-H2 project from the European Union's Horizon 2020 research and innovation programme under grant agreement No 862253; also, by the Deputyship for Research & Innovation, Ministry of Education of Saudi Arabia for the project number 341; and by the Spanish grants PID2020-116712RB-C21, PID2021-122477OB-I00 and TED2021-131033B–I00 from MCIN/AEI/10.13039/501100011033. A. T-M thanks the Consejería de Educación, Juventud y Deporte of the Comunidad de Madrid for the Ayuda Destinada a la Atracción de Talento Investigador (2020-T2/AMB-19927). I. R-G thanks the PhD Program in Electroquímica, Ciencia y Tecnología of Escuela de doctorado of Universidad Autónoma de Madrid., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly active ultralow loading Pt electrodes for hydrogen evolution reaction developed by magnetron sputtering

  • Villamayor, Antía
  • Galyamin, Dmitry
  • Barrio, Laura V.
  • Berasategui, Eva G.
  • Rojas Muñoz, Sergio
Developing cost-effective components for PEM electrolyzers is key to transforming renewable energy into H2. Platinum is a scarce and expensive material but also, is the most active known catalyst for hydrogen evolution reaction in PEM electrolysis; thus it is of utmost importance to focus on developing electrocatalysts that utilize the minimum amount of platinum without losses in cell performance to make PEM electrolysis affordable. In addition, and with the aim of scaling up electrode production, it is imperative to develop a robust automated industrial manufacturing process to avoid the waste of catalyst during electrode preparation. In this work, magnetron sputtering gas aggregation method is studied for developing three low loading Pt electrodes (0.105, 0.062, and 0.052 mg cm−2), achieving remarkable overpotentials as low as 8 mV at 10 mA cm−2 for HER, showing similar activity than commercial Pt electrodes with more than 4 times less Pt (compared to 0.3 mgcm−2 Pt commercial GDL)., We acknowledge financial support from project PID2020-116712RB-C21 funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly active and stable OER electrocatalysts derived from Sr2MIrO6 for proton exchange membrane water electrolyzers

  • Retuerto, María
  • Pascual, Laura
  • Torrero, Jorge
  • Abdel Salam, Mohamed A.
  • Tolosana-Moranchel, Álvaro
  • Gianolio, Diego
  • Ferrer, Pilar
  • Kayser, Paula
  • Wilke, Vincent
  • Stiber, Svenja
  • Celorrio, Verónica
  • Mokthar, Mohamed
  • Garcia-Sanchez, Daniel G.
  • Gago, Aldo S.
  • Friedrich, Kaspar A.
  • Peña, Miguel A.
  • Alonso, J. A.
  • Rojas Muñoz, Sergio
Proton exchange membrane water electrolysis is a promising technology to produce green hydrogen from renewables, as it can efficiently achieve high current densities. Lowering iridium amount in oxygen evolution reaction electrocatalysts is critical for achieving cost-effective production of green hydrogen. In this work, we develop catalysts from Ir double perovskites. Sr<inf>2</inf>CaIrO<inf>6</inf> achieves 10 mA cm−2 at only 1.48 V. The surface of the perovskite reconstructs when immersed in an acidic electrolyte and during the first catalytic cycles, resulting in a stable surface conformed by short-range order edge-sharing IrO<inf>6</inf> octahedra arranged in an open structure responsible for the high performance. A proton exchange membrane water electrolysis cell is developed with Sr<inf>2</inf>CaIrO<inf>6</inf> as anode and low Ir loading (0.4 mg<inf>Ir</inf> cm−2). The cell achieves 2.40 V at 6 A cm−2 (overload) and no loss in performance at a constant 2 A cm−2 (nominal load). Thus, reducing Ir use without compromising efficiency and lifetime. © 2022, The Author(s)., The authors acknowledge PROMET-H2 project. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 862253. The Deputyship for Research & Innovation, Ministry of Education of Saudi Arabia is acknowledged for funding this research work through the project number 341. Financial support from grants PID2020-116712RB-C21, PID2021-122477-OB-I00 and PID2019-103967RJ-I00 funded by MCIN/ AEI/10.13039/501100011033 is acknowledged. M.R. thanks RyC2019- 026521 from MCIN/AEI/10.13039/501100011033 and “ESF Investing in your future” and L´Oréal-UNESCO for a “For Women in Science” Fellowship. The authors acknowledge Diamond Light Source for time on Beamline B18 under the proposal SP27733-1. The authors wish to acknowledge the Deutsche Akademische Austausch Dienst (DAAD), Scholarship code number 57540124., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced stability of SrRuO3 mixed oxide via monovalent doping in Sr1-xKxRuO3 for the oxygen evolution reaction

  • Rodríguez García, Isabel
  • Galyamin, Dmitry
  • Pascual, Laura
  • Ferrer, Pilar
  • Peña, Miguel A.
  • Grinter, Dave
  • Held, Georg
  • Abdel Salam, Mohamed A.
  • Mokhtar, Mohamed
  • Narasimharao, Katabathini
  • Retuerto, María
  • Rojas Muñoz, Sergio
Ru mixed oxides are the most active catalysts for the oxygen evolution reaction (OER) in acid electrolyte. However, their stability is seriously compromised during the reaction. In this work we show that it is possible to enhance both OER activity and durability of SrRuO3 mixed oxide by the partial doping with K+ in Sr2+ sites. Sr1-xKxRuO3 perovskites (x = 0.00, 0.05, 0.10 and 0.20) have been synthesized by wet chemistry. The partial doping with K+ cations led to oxides with Ru atoms in a higher oxidation state. In addition, K-doping resulted in perovskites with slightly higher symmetry. The performance of the K-doped perovskites for the OER was assessed in acid electrolyte. Clearly, the K-doped materials, especially Sr0.80K0.20RuO3, display higher activity (lower E10) and significantly higher durability than the undoped sample SrRuO3. The results indicate that chemical modifications on Ru perovskites can be a suitable strategy to improve the stability of Ru phases during the OER., We acknowledge PROMET-H2 project. This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 862253. The authors extend their appreciation to the Deputyship for Research & Innovation, Ministry of Education of Saudi Arabia for funding this research work through the project number 341. We acknowledge financial support of MCIN/AEI/10.13039/501100011033 for the projects ENE2016-77055-C3-3-R, PID2019-103967RJ-I00 and PID2020-116712RB-C21. M.R thanks MCIN/AEI/10.13039/501100011033 and “ESF Investing in your future” for the Ramon y Cajal research contract (RyC2019-026521) and L'Oréal-UNESCO for a “For Women in Science” Fellowship. The authors acknowledge Diamond Light Source for time on the VerSoX B07-B beamline under the commissioning proposal cm-28150. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrocatalytic Properties of Ni1+xFe3−x−yAyN (A = Mo, W): The Effect of Mo and W in the Oxygen Evolution and Hydrogen Evolution Reaction in Alkaline Media

  • Coca Clemente, José A.
  • Rodríguez García, Isabel
  • Tolosana Moranchel, Álvaro
  • Gómez de la Fuente, Jose Luis
  • Ocón, Pilar
  • Retuerto, María
  • Rojas Muñoz, Sergio
Ni, Fe-based nitrides have been widely studied for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline media, displaying electrocatalytic activities similar to Pt and other noble metal electrocatalysts. The incorporation of small amounts of Mo or W on these Ni, Fe-based nitrides is expected to have a significant effect on the electrocatalytic performance of these materials, especially for the HER activity. In this work, transition metal nitrides (TMNs) with the empirical formula Ni1+xFe3−x−yAyN (A = Mo, W), were obtained in two steps: synthesis of the transition metal oxide precursors by an easy, one-pot sol–gel polymerization method followed by nitridation under ammonia atmosphere to obtain the final TMNs. Their HER and OER catalytic performances in alkaline electrolyte (0.1 M KOH solution) were studied and it was observed that the incorporation of small quantities of Mo or W in these Ni, Fe-based nitrides (Ni1+xFe3−x−yAyN, where y = 0.1) results in improved HER and OER activities, especially in the TMN that contains W (i.e., Ni1+xFe2.9−xW0.1N), where the overpotentials were 348 mV for OER and 269 mV for HER. These values are lower than those obtained for Ni1+xFe3−xN, which are 395 mV for OER and 368 mV for HER., This study was supported by Consejería de Educación, Juventud y Deporte, Comunidad de Madrid (2020-T2/AMB-19927), Agencia Estatal de Investigación (2020-T2/AMB-19927), and the Spanish grants PID2020-116712RB-C21 and TED2021-131033B-I00 from MCIN/AEI/10.13039/501100011033., supportng information, Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Laser driven generation of single atom Fe-N-C catalysts for the oxygen reduction reaction

  • Madrid, Ainhoa
  • Tolosana-Moranchel, Álvaro
  • García, Álvaro
  • Rojas, Sergio
  • Bartolome, Fernando
  • Pakrieva, Ekaterina
  • Simonelli, Laura
  • Martinez, Gema
  • Hueso, Jose L.
  • Santamaria, Jesus
Single-Atom Catalysts (SACs) have emerged as the ultimate solutions in challenging systems bridging the gap between homogeneous and heterogeneous catalysts. However, feasible synthesis methods are necessary to stabilize single metal atoms, increase catalyst loadings and scale up the synthesis. Due to its sluggish kinetics, the oxygen reduction reaction (ORR) is the main source of irreversibility in proton exchange membrane fuel cells (PEMFC). The most promising candidates to replace Pt-based catalysts for the ORR in fuel cells are the so-called Fe-N/C catalysts. These catalysts display high ORR activity in acidic and alkaline electrolytes. In this work, we propose a laser-driven pyrolysis approach to generate Fe-N/C SACs that involves decomposition of aerosolized iron-phthalocyanines. The resulting catalyst displays ORR activity in acidic and alkaline electrolytes, with competitive half-potential and kinetic current density values in comparison with state-of-the-art electrocatalysts.