Pasar al contenido principal

DISEÑO OPTIMIZADO DE ELECTROCATALIZADORES PARA LA REDUCCION DE OXIGENO Y OXIDACION DE ALCOHOLES

ENE2016-77055-C3-3-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Insights on the electrooxidation of ethanol with Pd-based catalysts in alkaline electrolyte

  • Torrero, Jorge
  • Montiel, Manuel
  • Peña Jiménez, Miguel Antonio
  • Ocón, Pilar
  • Rojas, Sergio
4 figures., In this work, we report a facile method of synthesis of carbon supported Pd, PdRu, and PdNi nanoparticles, and a comparative study of their catalytic behavior for the electrooxidation of ethanol in alkaline media. The addition of metals such as Ru or Ni increases the oxophilicity of the Pd surface, as observed from the shifting of the Pd oxide reduction peaks. As a consequence, the onset potential for the electrooxidation of ethanol shifts to less positive values on the bimetallic catalysts. The nature and evolution of the species formed during the electrooxidation of ethanol over the catalysts under study has been monitored using in situ infrared spectroscopy. In order to assess properly the evolution of the species formed during the electrooxidation of ethanol, infrared spectra have been recorded in both H2O and D2O electrolytes. The results presented in this work demonstrate that the scission of the C–C bond of ethanol takes place at the surface of Pd/C and PdM/C (M = Ni and Ru) at potentials as low as 30 mV. However, at potentials above E ≥ 400 mV, acetates are the main species formed during the electrooxidation of ethanol., Projects ENE2016-77055-C3-1-R and ENE2016-77055-C3-3-R from the Ministerio de Economía, Industria y Competitividad from Spain and Project PIE 201480E122 from CSIC are acknowledged for support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Na-doped ruthenium perovskite electrocatalysts with improved oxygen evolution activity and durability in acidic media

  • Retuerto, María
  • Pascual, Laura
  • Calle-Vallejo, Federico
  • Ferrer, Pilar
  • Gianolio, Diego
  • González Pereira, Amaru
  • García Estévez, Álvaro
  • Torrero, Jorge
  • Fernández-Díaz, M. T.
  • Bencok, Peter
  • Peña Jiménez, Miguel Antonio
  • García Fierro, José Luis
  • Rojas Muñoz, Sergio
[EN] The design of active and durable catalysts for the H2O/O2 interconversion is one of the major challenges of electrocatalysis for renewable energy. The oxygen evolution reaction (OER) is catalyzed by SrRuO3 with low potentials (ca. 1.35 VRHE), but the catalyst’s durability is insufficient. Here we show that Na doping enhances both activity and durability in acid media. DFT reveals that whereas SrRuO3 binds reaction intermediates too strongly, Na doping of ~0.125 leads to nearly optimal OER activity. Na doping increases the oxidation state of Ru, thereby displacing positively O p-band and Ru d-band centers, weakening Ru-adsorbate bonds. The enhanced durability of Na-doped perovskites is concomitant with the stabilization of Ru centers with slightly higher oxidation states, higher dissolution potentials, lower surface energy and less distorted RuO6 octahedra. These results illustrate how high OER activity and durability can be simultaneously engineered by chemical doping of perovskites., This work was supported by the ENE2013–42322-R and ENE2016-77055-C3-3-R projects from the Spanish Ministry of Economy and Competitiveness (MINECO). M.R. thanks MINECO’s Juan de la Cierva program for a grant (FPDI-2013-17582). F.C.V. thanks the Spanish MICIU for a Ramón y Cajal research contract (RYC-2015-18996) and financial support through the program “Units of Excellence María de Maeztu” (grant MDM-2017–0767). We thank G. Cibin for useful discussions on XAS data treatment and analysis from experiments on beamline B18 Diamond Light Source. We also thank A. Figueroa for helping with data acquisition on beamline I10 and discussions on data interpretation. We thank Diamond Light Source for access to beamlines B18 and I10 that contributed to the results presented here. We thank D. Arroyo and N. López for ICPOES analyses.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fe doped porous triazine as efficient electrocatalysts for the oxygen reduction reaction in acid electrolyte

  • García Estévez, Álvaro
  • Retuerto, María
  • Domínguez Fernández, Carlota
  • Pascual, Laura
  • Ferrer, Pilar
  • Gianolio, Diego
  • Serrano Rubio, Aída
  • Aßmanne, Pia
  • Sancheze, Daniel G.
  • Peña Jiménez, Miguel Antonio
  • Rojas Muñoz, Sergio
[EN] In this work, we report the synthesis of Fe/N/C electrocatalysts using triazine based porous organic polymers as precursors. Iron-doped triazine porous organic polymers were obtained by in situ polymerization of iron pre- cursor and 1,2- or 1,4- dicyanobenzene (DCB). In order to obtain the actual catalyst, the polymer obtained was subjected to thermal treatment under NH3. The catalysts obtained exhibit activity and durability for the oxygen reduction reaction in acid electrolyte. Thorough characterization of the catalysts reveal the formation of several types of iron species, including metallic iron, iron carbides and Fe-Nx moieties. The latter species is the main responsible for the high activity measured for the oxygen reduction reaction in acid electrolyte. 1,2-DCB results in more active catalysts than 1,4-DCB due to the higher fraction of FeNx ensembles in the former, probably because vicinal positions of N-bearing groups are more prone to coordinate Fe atoms., This work was supported by PEGASUS project, funded by the European Union’s Horizon 2020 Programme (call JTI-FCH-2017-1) for the Fuel Cells and Hydrogen Joint Technology Initiative under grant agreement n° 779550, and by project ENE2016-77055-C3-3-R from the Spanish Ministry of Economy and Competitiveness (MINECO). We acknowledge the Spanish CRG BM25-SpLine, MINECO, The Spanish National Research Council (CSIC) and The European Synchrotron (The ESRF) for provision of synchrotron radiation facilities.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

La1.5Sr0.5NiMn0.5Ru0.5O6 Double Perovskite with Enhanced ORR/OER Bifunctional Catalytic Activity

  • Retuerto, María
  • Calle-Vallejo, Federico
  • Pascual, Laura
  • Lumbeeck, Gunnar
  • Fernández-Díaz, M. T.
  • Croft, Mark
  • Gopalakrishnan, Jagannatha
  • Peña Jiménez, Miguel Antonio
  • Hadermann, Joke
  • Greenblatt, Martha
  • Rojas Muñoz, Sergio
[EN] Perovskites (ABO) with transition metals in active B sites are considered alternative catalysts for the water oxidation to oxygen through the oxygen evolution reaction (OER) and for the oxygen reduction through the oxygen reduction reaction (ORR) back to water. We have synthesized a double perovskite (ABB′O) with different cations in A, B, and B′ sites, namely, (LaSr)(NiMn)(NiRu)O (LSNMR), which displays an outstanding OER/ORR bifunctional performance. The composition and structure of the oxide has been determined by powder X-ray diffraction, powder neutron diffraction, and transmission electron microscopy to be monoclinic with the space group P2/n and with cationic ordering between the ions in the B and B′ sites. X-ray absorption near-edge spectroscopy suggests that LSNMR presents a configuration of ∼Ni, ∼Mn, and ∼Ru. This bifunctional catalyst is endowed with high ORR and OER activities in alkaline media, with a remarkable bifunctional index value of ∼0.83 V (the difference between the potentials measured at -1 mA cm for the ORR and +10 mA cm for the OER). The ORR onset potential (E) of 0.94 V is among the best reported to date in alkaline media for ORR-active perovskites. The ORR mass activity of LSNMR is 1.1 A g at 0.9 V and 7.3 A g at 0.8 V. Furthermore, LSNMR is stable in a wide potential window down to 0.05 V. The OER potential to achieve a current density of 10 mA cm is 1.66 V. Density functional theory calculations demonstrate that the high ORR/OER activity of LSNMR is related to the presence of active Mn sites for the ORR- and Ru-active sites for the OER by virtue of the high symmetry of the respective reaction steps on those sites. In addition, the material is stable to ORR cycling and also considerably stable to OER cycling., This work was supported by the ENE2016-77055-C3-3-R project from the Spanish Ministry of Economy and Competitiveness (MINECO) and PIE 201480E122 from CSIC. M.R. thanks MINECO’s Juan de la Cierva program for a grant (FPDI-2013-17582). F.C.-V. thanks the Spanish MEC for a Ramón y Cajal research contract (RYC-2015-18996). M.G. acknowledges the support from NSF-DMR-1507252 grant, NJ, USA., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Advances in membranes and membrane reactors for the Fischer-Tropsch synthesis process for biofuel production

  • Liuzzi, Dalia
  • Fernández, Ekain
  • Pérez, Susana
  • Ipiñazar, Enrique
  • Arteche, Amaya
  • García Fierro, José Luis
  • Viviente, Jose Luis
  • Pacheco Tanaka, David Alfredo
  • Rojas Muñoz, Sergio
The biomass-to-liquid (BtL) process is a promising technology to obtain clean, liquid, second-generation biofuels and chemicals. The BtL process, which comprises several steps, is based upon the gasification of biomass and the catalytic transformation of the syngas that is obtained via the Fischer-Tropsch synthesis (FTS) reaction, producing a hydrocarbon pool known as syncrude. The FTS process is a well-established technology, and there are currently very large FTS plants operating worldwide that produce liquid fuels and hydrocarbons from natural gas (NG) (gas-to-liquids, GtL process) and coal (coal-to-liquids, CtL process). Due to the limited availability of local biomass, the size of the BtL plants should be downscaled compared to that of a GtL or CtL plant. Since the feasibility of the XtL (X refers to any energy source that can be converted to liquid, including coal, NG, biomass, municipal solid waste, etc.) processes is strongly influenced by the economies of scale, the viability of small-scale BtL plants can be compromised. An interesting approach to overcome this issue is to increase the productivity of the FTS process by developing reactors and catalysts with higher productivities to generate the desired product fraction. Recently, by integrating membrane reactors with the FTS process the gas feeding and separation unit have been demonstrated in a single reactor. In this review, the most significant achievements in the field of catalytic membrane reactors for the FTS process will be discussed. Different types of membranes and configurations of membrane reactors, including H2O separation and H2 -feed distribution, among others, will be analyzed., The authors acknowledge Project ENE2016-77055-C3-3-R from the Ministerio de Economia y Competitividad. In addition, the authors would like to thank the Membrane Technology and Process Intensification Department and the Sustainable Chemistry Department at Tecnalia and the Group of Energy and Sustainable Chemistry at CSIC.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Mejora de la productividad de la síntesis Fischer-Tropsch con catalizadores de RU y reactores de membrana

  • Liuzzi, Dalia
[ES] La Síntesis Fischer-Tropsch (FTS, Fischer-Tropsch Synthesis) es una reacción de polimerización para la obtención de cadenas de hidrocarburos de distintos tamaños a partir de gas de síntesis, empleando catalizadores metálicos de Fe, Co o Ru. El Ru es el más activo de los metales en la FTS, sin embargo, no se ha empleado a gran escala en planta FT debido a su elevado coste. Los productos FT se convierten en combustibles líquidos a través de las llamadas tecnologías XtL, en las que X hace referencia a la fuente del gas de síntesis (X= C: Carbón, G: Gas Natural, B: Biomasa, W: Waste o residuos municipales). La tecnología BtL es la más atractiva desde el punto de vista de las emisiones de gases de efecto invernadero, ya que el balance de CO2 es prácticamente nulo al entender que éste se ha consumido para producir la biomasa. Sin embargo, debido a la poca disponibilidad de biomasa local (en comparación con los grandes yacimientos de Gas Natural o de Carbón), la escala de las plantas BtL son menores. En este contexto, la intensificación del proceso FT juega un rol importante para la producción de biocombustibles limpios y sostenibles. La obtención de catalizadores con una mayor actividad por paso, o el diseño de reactores multifuncionales más eficientes son claros ejemplos de la intensificación del proceso FT que se requiere en las plantas BtL. Los catalizadores de Ru multiplican, por centro activo, por 10 la actividad obtenida con catalizadores de Co, con una carga de metal hasta 7 veces menor. Por su parte, los reactores de membrana en los que la membrana no sólo actúa como contenedor del lecho catalítico, sino que también tiene una función de separación de los productos o el acondicionamiento del gas de síntesis, permiten disminuir el tamaño de las plantas BtL, y, por lo tanto, costes de operación. Éstas son algunas de las ventajas que ofrecen los catalizadores de Ru y los reactores de membrana en la FTS., Project ENE2016-77055-C3-3-R. Ministerio de Economia y Competitividad, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Post-synthesis Treatment of TS-1 with TPAOH: Effect of Hydrophobicity on the Liquid-Phase Oxidation of Furfural to Maleic Acid

  • Rodenas Olaya, Yolanda
  • García Fierro, José Luis
  • Mariscal López, Rafael
  • Retuerto, María
  • López Granados, Manuel
A series of modified TS-1 catalysts was prepared by post-synthesis hydrothermal treatment of a parent TS-1 zeolite with solutions of different concentrations of tetrapropylammonium hydroxide (TPAOH). The treatment results in an advantageous improvement of the catalytic activity for the liquid oxidation of furfural with H2O2 to produce maleic acid. The highest yield of maleic acid (83%) was obtained when using 0.025 M TPAOH solution; while the maximum yield of the untreated TS-1 was 70%. The catalysts were thoroughly characterised by XRD, UV–Vis, ICP–OES, XPS, TEM, N2-adsorption, DRIFT of chemisorbed deuterated acetonitrile and TEM, in order to elucidate the origin of the catalytic improvement. The characterisation studies allowed us to conclude that, besides the well-known creation of mesopores within the zeolite primary particles, the TPAOH treatment also results in the increase of the hydrophobicity balance of the channels and cavities of the zeolites (via silanols removal). Both properties have a relevant effect on the improvement of the catalytic properties. © 2019, Springer Science+Business Media, LLC, part of Springer Nature., Financial support from the Spanish Ministry of Science, Innovation and Universities (MICINN) (project CTQ2015-64226-C3-1-R) and from CSIC (i-link1048 project) is gratefully acknowledged. Y.R. thanks MINECO for her FPI pre-doctoral grant (BES-2016-077184) and M.R. thanks the MINECO project ENE2016-77055-C3-3-R for her postdoctoral contract., The online version of this article (https ://doi.org/10.1007/s1124 4-019-01149 -2) contains supplementary material, which is available to authorized users., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Two-dimensional Pd-nanosheets as efficient electrocatalysts for ethanol electrooxidation. Evidences of the C–C scission at low potentials

  • Farsadrooh, Majid
  • Torrero, Jorge
  • Pascual, Laura
  • Peña, Miguel A.
  • Retuerto, María
  • Rojas Muñoz, Sergio
Pd-nanosheets with a lateral size of ca. 5 nm have been prepared by a simple chemical method. The Pd-nanosheets obtained exhibited a 2D morphology in which Pd atoms are preferentially exposed at the surface of the particles. In addition, a preferential exposure of Pd atoms in 111 planes is observed. As a result, the Pd-nanosheets exhibit a very high catalytic activity for the electrooxidation of ethanol in alkaline electrolyte, superior to that of commercial nanosized Pd particles. In situ infrared studies conducted during the electrooxidation of ethanol reveal that the scission of the C–C bond of ethanol takes place at the surface of Pd-nanosheets at low potentials (as low as 30 mV). However, at higher potentials, the formation of partially oxidized species, typically acetates, is the preferred reaction pathway. © 2018 Elsevier B.V., Dr. Francisco Javier García-García is acknowledged for his help with the discussion of results. This work was supported by Projects ENE2016-77055-C3-3-R from Ministerio de Economía, y Competitividad from Spain, and PIE 201480E122 from CSIC, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced stability of SrRuO3 mixed oxide via monovalent doping in Sr1-xKxRuO3 for the oxygen evolution reaction

  • Rodríguez García, Isabel
  • Galyamin, Dmitry
  • Pascual, Laura
  • Ferrer, Pilar
  • Peña, Miguel A.
  • Grinter, Dave
  • Held, Georg
  • Abdel Salam, Mohamed A.
  • Mokhtar, Mohamed
  • Narasimharao, Katabathini
  • Retuerto, María
  • Rojas Muñoz, Sergio
Ru mixed oxides are the most active catalysts for the oxygen evolution reaction (OER) in acid electrolyte. However, their stability is seriously compromised during the reaction. In this work we show that it is possible to enhance both OER activity and durability of SrRuO3 mixed oxide by the partial doping with K+ in Sr2+ sites. Sr1-xKxRuO3 perovskites (x = 0.00, 0.05, 0.10 and 0.20) have been synthesized by wet chemistry. The partial doping with K+ cations led to oxides with Ru atoms in a higher oxidation state. In addition, K-doping resulted in perovskites with slightly higher symmetry. The performance of the K-doped perovskites for the OER was assessed in acid electrolyte. Clearly, the K-doped materials, especially Sr0.80K0.20RuO3, display higher activity (lower E10) and significantly higher durability than the undoped sample SrRuO3. The results indicate that chemical modifications on Ru perovskites can be a suitable strategy to improve the stability of Ru phases during the OER., We acknowledge PROMET-H2 project. This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 862253. The authors extend their appreciation to the Deputyship for Research & Innovation, Ministry of Education of Saudi Arabia for funding this research work through the project number 341. We acknowledge financial support of MCIN/AEI/10.13039/501100011033 for the projects ENE2016-77055-C3-3-R, PID2019-103967RJ-I00 and PID2020-116712RB-C21. M.R thanks MCIN/AEI/10.13039/501100011033 and “ESF Investing in your future” for the Ramon y Cajal research contract (RyC2019-026521) and L'Oréal-UNESCO for a “For Women in Science” Fellowship. The authors acknowledge Diamond Light Source for time on the VerSoX B07-B beamline under the commissioning proposal cm-28150. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed