Pasar al contenido principal

Development of sustainable catalysts for clean hydrogen production: insight from advanced TEM experiments

RYC2021-033764-I

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Desarrollar, Atraer y Retener Talento
Subprograma Subprograma Estatal de Incorporación
Convocatoria Ramón y Cajal
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE CADIZ

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A photodetector based on the non-centrosymmetric 2D pseudo-binary chalcogenide MnIn2Se4

  • Serra, Marco
  • Antonatos, Nikolas
  • Lajaunie, Luc
  • Weng, Mouyi
  • Bastonero, Lorenzo
  • Sarkar, Kalyan Jyoti
  • Gusmao, Rui
  • Luxa, Jan
  • Bartoszewicz, Rafal
  • Ziembicki, Jakub
  • Plutnarová, Iva
  • Marzari, Nicola
  • Kudrawiec, Robert
  • Sofer, Zdenek
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Due to their attractive band gap properties and van der Waals structure, 2D binary chalcogenide materials have been widely investigated in the last decade, finding applications in several fields such as catalysis, spintronics, and optoelectronics. Ternary 2D chalcogenide materials are a subject of growing interest in materials science due to their superior chemical tunability which endows tailored properties to the devices prepared thereof. In the family of AIIBIII2XVI4, ordered ZnIn2S4-like based photocatalytic systems have been studied meticulously. In contrast, reports on disordered phases appear to a minor extent. Herein, a photoelectrochemical (PEC) detector based on the pseudo-binary MnIn2Se4 system is presented. A combination of optical measurements and DFT calculations confirmed that the nature of the bandgap in MnIn2Se4 is indirect. Its performance outclasses that of parent compounds, reaching responsivity values of 8.41 mA W-1. The role of the non-centrosymmetric crystal structure is briefly discussed as a possible cause of improved charge separation of the photogenerated charge carriers., Z. S. was supported by the ERC-CZ program (project LL2101) from the Ministry of Education Youth and Sports (MEYS). We acknowledge funding from the European Union through the 2D-PRINTABLE project (GA-101135196). This work was supported by the project "The Energy Conversion and Storage" funded as project no. CZ.02.01.01/00/22_008/0004617 by Programme Johannes Amos Commenius, call Excellent Research. N. A. acknowledges funding from the National Science Centre (NCN) Poland SONATA 19 Grant no. 2023/51/D/ST11/02588 and at Wroclaw University of Science and Technology, and this work was supported by the National Science Centre (NCN) Poland OPUS 23 no. 2022/45/B/ST7/02750. Calculations have been carried out using resources provided by Wroclaw Centre for Networking and Supercomputing. L. L. acknowledges funding from the Spanish Ministerio de Economia y Competitividad, the Ministerio de Ciencia e Innovacion MCIN/AEI/10.13039/501100011033/FEDER UE, and the European Union "NextGenerationEU"/PRTR (PID2022-140370NB-I00, RYC2021-033764-I, CPP2021-008986). The (S)TEM measurements were performed at the National Facility ELECMI ICTS ("Division de Microscopia Electronica", Universidad de Cadiz, DME-UCA). Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1). J. A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021-031006-I financed support by MCIN/AEI/10.13039/501100011033 and by European Union/NextGenerationEU/PRTR). L. B. and N. M. gratefully acknowledge support from the Deutsche Forschungsgemeinschaft (DFG) under Germany's Excellence Strategy (EXC 2077, no. 390741603, University Allowance, University of Bremen) and Lucio Colombi Ciacchi, the host of the "U Bremen ExcellenceChair Program". N. M. acknowledges support by the NCCR MARVEL, a National Centre of Competence in Research, funded by the Swiss National Science Foundation (grant number 205602). K. J. S. was supported by the Johannes Amos Comenius Programme, European Structural and Investment Funds, project CHEMFELLS VI (no. CZ.02.01.01/00/22_010/0008122).
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

A high-performance “fueled” photodetector based on few-layered 2D ternary chalcogenide NiGa2S4

  • Serra, Marco
  • Antonatos, Nikolas
  • Luxa, Jan
  • Lajaunie, Luc Cyrille Jacques
  • Albero, Josep
  • Sabik, Agata
  • Linhart, Wojciech M.
  • García, Hermenegildo
  • Kudrawiec, Robert
  • Sedmidubský, David
  • Sofer, Zdenek
Few-layered binary 2D transition metal chalcogenides have been comprehensively employed in photodetector systems thanks to their intrinsic band gap structure and a high in-plane charge carrier mobility. Their rich chemistry is further broadened when considering ternary 2D chalcogenide materials, giving the possibility to prepare isomorphic materials characterized by various metal distributions within the framework of a crystal structure. Whereas the “inverse” A(τ)B(Ω)(τ)2X4 hexagonal structures (e.g. ZnIn2S4) have been widely studied in photocatalysis, “normal” AII(Ω) BIII(τ)2XVI4 phases have not been considered so far. In this study, a NiGa2S4 photodetector has been prepared by drop-casting the exfoliated crystals onto ITO glass. Their photoresponse has been analyzed either in the absence or in the presence of an electron donor species (EtOH) in the electrolyte solution. Ethanol acts as a fuel in the PEC photodetector system boosting their performance by a factor of ∼x49 in terms of the responsivity at a given wavelength. Moreover, the spectral response is expanded from blue to far IR wavelengths, reaching responsivity values from 48 to 7 mA W−1. The dynamics of photogenerated electrons and holes has been studied using laser flash photolysis. The stability of the “fueled” PEC photodetector has been evaluated through long-term tests which have shown a stable response over extended periods. It is anticipated that the present work can provide fundamental insight into the field of PEC semiconductor-based photodetectors, offering an extendable strategy to engineer high-performance PEC devices., 11 páginas
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Combining low-loss EELS experiments with machine learning-based algorithms to automate the phases separation imaging in industrial duplex stainless steels

  • Castro Riglos, V.
  • Amaya Dolores, Beatriz
  • Ramasubramaniam, A.
  • González Souto, Lorena
  • Sanchez, R.
  • Botana Pedemonte, Francisco Javier
  • Almagro, J.F.
  • Calvino Gámez, José Juan
  • Lajaunie, Luc Cyrille Jacques
At present, transmission electron microscopy is regarded as the main option when dealing with phase characterization for materials at a nanometric scale. The development and improvement of complementary techniques such as energy-dispersive X-ray spectroscopy (EDS), electron energy loss spectroscopy (EELS), imaging detectors and associated computational methods provide a huge variety of choices to determine the composition and crystal structure at any region of a specimen. Despite all these advancements, phase identification for some specific materials having phases with similar structure or similar composition might still be a difficult procedure to perform. To overcome this difficulty, a new method is proposed which combines the acquisition of low-loss EELS spectra with a subsequent analysis driven by machine learning based algorithms (clustering). In the present research, this new approach is applied to a set of industrial duplex stainless steels having different compositions and it is contrasted to other characterization alternatives. As opposed to the other options, this method proved to be effective, reliable and time-saving., Ministerio de Ciencia e Innovación (Spain) Ministerio de Economía y Competitividad (Spain) European Commission (European Union) Universidad de Cádiz (Spain), 8 páginas
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Textural, Microstructural and Chemical Characterization of Ferritic Stainless Steel Affected by the Gold Dust Defect

  • Amaya Dolores, Beatriz
  • Ruiz Flores, Andrés
  • Núñez Galindo, Andrés
  • Calvino Gámez, José Juan
  • Almagro Bello, Juan F.
  • Lajaunie, Luc Cyrille Jacques
The “gold dust defect” (GDD) appears at the surface of ferritic stainless steels (FSS) and degrades their appearance. Previous research showed that this defect might be related to intergranular corrosion and that the addition of aluminium improves surface quality. However, the nature and origin of this defect are not properly understood yet. In this study, we performed detailed electron backscatter diffraction analyses and advanced monochromated electron energy-loss spectroscopy experiments combined with machine-learning analyses in order to extract a wealth of information on the GDD. Our results show that the GDD leads to strong textural, chemical, and microstructural heterogeneities. In particular, the surface of affected samples presents an -fibre texture which is characteristic of poorly recrystallised FSS. It is associated with a specific microstructure in which elongated grains are separated from the matrix by cracks. The edges of the cracks are rich in chromium oxides and MnCr2O4 spinel. In addition, the surface of the affected samples presents a heterogeneous passive layer, in contrast with the surface of unaffected samples, which shows a thicker and continuous passive layer. The quality of the passive layer is improved with the addition of aluminium, explaining the better resistance to the GDD.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Composite MAX phase/MXene/Ni electrodes with a porous 3D structure for hydrogen evolution and energy storage application

  • Sergiienko, S. A.
  • Lajaunie, Luc Cyrille Jacques
  • Rodríguez-Castellón, E.
  • Constantinescu, G.
  • Lopes, D. V.
  • Shcherban, N. D.
  • Calvino Gámez, José Juan
  • Labrincha, Joao A.
  • Sofer, Z.
  • Kovalevsky, A. V.
MXenes, a family of two-dimensional (2D) transition metal carbides, have been discovered as exciting candidates for various energy storage and conversion applications, including green hydrogen production by water splitting. Today, these materials mostly remain interesting objects for in-depth fundamental studies and scientific curiosity due to issues related to their preparation and environmental stability, limiting potential industrial applications. This work proposes a simple and inexpensive concept of composite electrodes composed of molybdenum- and titanium-containing MAX phases and MXene as functional materials. The concept is based on the modification of the initial MAX phase by the addition of metallic Ni, tuning Al- and carbon content and synthesis conditions, followed by fluoride-free etching under alkaline conditions. The proposed methodology allows producing a composite electrode with a well-developed 3D porous MAX phase-based structure acting as a support for electrocatalytic species, including MXene, and possessing good mechanical integrity. Electrochemical tests have shown a high electrochemical activity of such electrodes towards the hydrogen evolution reaction (HER), combined with a relatively high areal capacitance (up to 10 F cm−2).
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

On the likely origin of the Gold Dust Defect in the production line of industrial ferritic stainless steel

  • Amaya Dolores, Beatriz
  • Núñez Galindo, Andrés
  • Calvino Gámez, José Juan
  • Almagro, Juan Francisco
  • Lajaunie, Luc Cyrille Jacques
The “Gold Dust Defect” that sometimes appears on the surface of the AISI 430 ferritic stainless steel has been related to an improper recrystallization of the material. Hot-rolling, a decisive step in the production process, seems the step where this defect is induced and temperature during this treatment plays a key role. To trace back the origin of this defect, the microstructural evolution of a sample of an AISI 430 was monitored at the different stages in the production process of the steel. In particular, a detailed study combining electron backscatter diffraction with other techniques, such as optical microscopy and scanning electron microscopy has been performed. The whole set of results evidences that after hot-rolling and subsequent annealing, the material contains a large amount of martensite in the center of the cross-section due to a fast cooling of the austenite originated during rolling. In addition, the surface shows a top-layer made up by unrecrystallized subgrains separated from the matrix by an accumulation of chromium carbides. After pickling, the top-layer of subgrains semi-detaches from the surface forming flakes which cannot recrystallize. Most of these flakes do not peel off during the subsequent stages but survive until the end of the production process, forming Gold Dust Defect flakes.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

TiO2 surface hybridisation with Ag and CuO for solar-assisted environmental remediation and sustainable energy applications

  • Dvoranová, D.
  • Koci, Kamila
  • Lajaunie, Luc
  • Edelmannová, Miroslava Filip
  • Seabra, Maria P.
  • Brezová, V.
  • Arenal, Raúl
  • Labrincha, J. A.
  • Tobaldi, David Maria
Industrialisation has led to unprecedented levels of outdoor air pollution, posing a significant health risk to human beings. Consequently, there is an urgent need to replace fossil fuels with sustainable energy sources, thereby mitigating these risks and providing a safer outdoor and indoor environment. Titanium dioxide is a versatile transition metal oxide with applications ranging from energy conversion to environmental remediation. However, it faces limitations, particularly in its absorption spectrum and charge separation efficiency, and enhancing these properties remains a significant challenge. In this research work, we have decorated the surface of TiO2 hybridising it with noble-metal and/or noble-metal oxides (Ag and/or CuO) to improve the photocatalytic performances (monitoring the removal of nitrogen oxides and benzene, and hydrogen generation from water splitting) under simulated solar-light irradiation. Our results showed that titania modified with an Ag : Cu molar ratio equal to 1 : 1, not only exhibited the most promising performance in terms of nitrogen oxides and benzene removal, it was the optimum amount for the light-induced generation of hydrogen from water splitting., This work was partly supported by the Italian Ministry of Research (MUR) in the framework of the National Recovery and Resilience Plan (NRRP), funded by the European Union – NextGenerationEU, M4C2, within the NRRP project NFFA-DI, CUP B53C22004310006, IR0000015. “I-PHOQS” Grant (CUP B53C22001750006) and under the complementary actions to the NRRP, “Fit4MedRob” Grant (PNC0000007, CUP B53C22006960001) and “ANTHEM” Grant (PNC0000003, CUP B53C22006710001), funded by NextGenerationEU. The STEM measurements were performed in the Laboratorio de Microscopias Avanzadas (LMA) at the Universidad de Zaragoza (Spain). Raul Arenal gratefully acknowledges the support from the Spanish Ministry of Science, Innovation and Universities (MICIU, PID2019-104739GB-100/AEI/10.13039/501100011033), the ′Severo Ochoa’ Programme for Centres of Excellence in R&D of the MICIU (CEX2023-001286-S MICIU/AEI /10.13039/501100011033), and from the Gobierno de Aragón (DGA) under the project E13-2R. Luc Lajaunie acknowledges funding the from the Spanish Ministerio de Economía y Competitividad, the Ministerio de Ciencia e Innovación (MCIN/AEI/10.13039/501100011033/FEDER UE), and the European Union “NextGenerationEU”/PRTR (PID2022-140370NB-I00, RYC2021-033764-I, CPP2021-008986). The authors also acknowledge the support by European Union under the REFRESH – Research Excellence for Region Sustainability and High-tech Industries project number, CZ.10.03.01/00/22_003/0000048 via the Operational Programme Just Transition and by Large Research Infrastructure ENREGAT (project No. LM2023056). The study was also financially supported by the Slovak Research and Development Agency under the contract Nr. APVV-21-0039 and Scientific Grant Agency of the Slovak Republic (VEGA Project 1/0422/24). We are particularly obliged to Miss Dafne Maria Glaglanon for proof-editing the English of the manuscript., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Open Access publishing facilitated by Consiglio Nazionale delle Ricerche, as part of the Wiley - CRUI-CARE agreement., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

TiO<sub>2</sub> surface hybridisation with Ag and CuO for solar-assisted environmental remediation and sustainable energy applications

  • Dvoranová, D.
  • Koci, K.
  • Lajaunie, L.
  • Edelmannova, M. F.
  • Seabra, M. P.
  • Brezová, V.
  • Arenal, R.
  • Labrincha, J. A.
  • Tobaldi, D. M.
Industrialisation has led to unprecedented levels of outdoor air pollution, posing a significant health risk to human beings. Consequently, there is an urgent need to replace fossil fuels with sustainable energy sources, thereby mitigating these risks and providing a safer outdoor and indoor environment. Titanium dioxide is a versatile transition metal oxide with applications ranging from energy conversion to environmental remediation. However, it faces limitations, particularly in its absorption spectrum and charge separation efficiency, and enhancing these properties remains a significant challenge. In this research work, we have decorated the surface of TiO2 hybridising it with noble‐metal and/or noble‐metal oxides (Ag and/or CuO) to improve the photocatalytic performances (monitoring the removal of nitrogen oxides and benzene, and hydrogen generation from water splitting) under simulated solar‐light irradiation. Our results showed that titania modified with an Ag : Cu molar ratio equal to 1 : 1, not only exhibited the most promising performance in terms of nitrogen oxides and benzene removal, it was the optimum amount for the light‐induced generation of hydrogen from water splitting.