Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Clústeres Octaédricos de Molibdeno y Tántalo con Haluros y sus Híbridos Nanoestructurados: Aplicaciones en Fotosíntesis Artificial

  • Hernandez-Niño, Jhon Sebastian|||0000-0002-6550-7107
[ES] Esta tesis doctoral describe la síntesis y caracterización de materiales basados en clústeres octaédricos de metales de transición (M6) y en sus híbridos con soportes grafíticos, tales como nitruros de carbono dopados y óxido de grafeno, así como en su aplicación en procesos de fotosíntesis artificial. En cuanto a los clústeres metálicos, esta tesis se centra en clústeres de molibdeno hexanucleares con ligandos internos yoduro y ligandos apicales carboxilato y su evaluación en la reacción de fotorreducción del CO2, así como clústeres hexanucleares de tántalo con ligandos internos bromuro y ligandos apicales aqua y su evaluación en la reacción de fotorreducción de agua. El capítulo I consiste en una introducción sobre el desarrollo de la fotosíntesis artificial y en la química de clústeres metálicos, con especial énfasis en los clústeres octaédricos de molibdeno y tántalo en los procesos de fotorreducción de dióxido de carbono y separación fotocatalítica del agua. A continuación, en el capítulo II se enumeran los objetivos de la investigación. El capítulo III describe detalladamente todos los procedimientos de síntesis para la obtención de los materiales fotocatalíticos y las técnicas instrumentales, tanto de caracterización como de seguimiento de las reacciones, que se utilizaron a lo largo de esta tesis doctoral. El capítulo IV consiste en los resultados derivados de la síntesis y caracterización de los clústeres de molibdeno inmovilizados en nitruro de carbono dopado con hierro y su posterior evaluación en la reacción de fotorreducción del dióxido de carbono. Aquí se evaluó la efectividad y selectividad de estos sistemas hacia la obtención principalmente de monóxido de carbono y metano. Se obtuvieron rendimientos considerablemente superiores respecto de materiales similares a los reportados en la literatura. En el capítulo V se describen los resultados derivados de la síntesis y caracterización de los clústeres octaédricos de tántalo y su posterior evaluación en fase líquida en la reacción de reducción de agua asistida por luz. En este capítulo se realizó la optimización de las condiciones de reacción para la obtención de hidrógeno molecular mediante la metodología de superficies de respuesta, que proporcionó la concentración idónea de HBr y metanol como aditivos utilizados en este sistema catalítico homogéneo. El capítulo VI, corresponde a los resultados derivados de la síntesis y caracterización de los clústeres de tántalo soportados en óxido de grafeno y su evaluación en la reacción de reducción del agua asistida por luz y en fase gas. De manera general, los materiales mostraron una elevada eficiencia, comparable con materiales similares reportados en la literatura para la generación de hidrógeno. Además, la reutilización de estos sólidos es posible hasta por 3 ciclos, con una ligera disminución de la actividad catalítica. En el capítulo VII se describen por primera vez las propiedades fotofísicas del clúster [{Ta6Bri12}Bra2(H2O)a4]·4H2O en agua y agua deuterada. Se explora la fotorreactividad con dadores y aceptores de electrones, con un énfasis especial en el O2 y se identifican las Especies Reactivas de Oxígeno (ROS) generadas tras la irradiación de luz en presencia de O2., [CA] Aquesta tesi doctoral descriu la síntesi i caracterització de materials basats en clústers octaèdrics de metalls de transició (M6) i en els seus híbrids amb suports grafítics, com ara nitrurs de carboni dopats i òxid de grafé, així com la seua aplicació en processos de fotosíntesi artificial. Pel que fa als clústers metàl·lics, aquesta tesi se centra en clústers hexanuclears de molibdè amb lligands interns iodur i lligands apicals carboxilat, i en la seua avaluació en la reacció de fotorreducció del CO2, així com en clústers hexanuclears de tàntal amb lligands interns bromur i lligands apicals aqua, i la seua avaluació en la reacció de fotorreducció de l'aigua. El capítol I consisteix en una introducció sobre el desenvolupament de la fotosíntesi artificial i en la química dels clústers metàl·lics, amb un èmfasi especial en els clústers octaèdrics de molibdè i de tàntal en els processos de fotorreducció del diòxid de carboni i en la separació fotocatalítica de l'aigua. A continuació, el capítol II recull els objectius de la investigació. El capítol III descriu detalladament tots els procediments de síntesi per a l'obtenció dels materials fotocatalítics, així com les tècniques instrumentals utilitzades tant per a la caracterització com per al seguiment de les reaccions al llarg d'aquesta tesi doctoral. El capítol IV presenta els resultats derivats de la síntesi i caracterització dels clústers de molibdè immobilitzats en nitrur de carboni dopat amb ferro i la seua posterior avaluació en la reacció de fotorreducció del diòxid de carboni. S'hi va avaluar l'eficàcia i la selectivitat d'aquests sistemes cap a l'obtenció principalment de monòxid de carboni i metà. Es van obtindre rendiments considerablement superiors als de materials similars reportats en la literatura. El capítol V descriu els resultats derivats de la síntesi i caracterització dels clústers octaèdrics de tàntal i la seua posterior avaluació en fase líquida en la reacció de reducció de l'aigua assistida per la llum. En aquest capítol es va optimitzar les condicions de reacció per a l'obtenció d'hidrogen molecular mitjançant la metodologia de superfícies de resposta, la qual va proporcionar la concentració òptima d'HBr i metanol com a additius utilitzats en aquest sistema catalític homogeni. El capítol VI correspon als resultats derivats de la síntesi i caracterització dels clústers de tàntal suportats en òxid de grafé i la seua avaluació en la reacció de reducció de l'aigua assistida per la llum i en fase gasosa. En termes generals, els materials van mostrar una elevada eficiència, comparable amb la de materials similars reportats en la literatura per a la generació d'hidrogen. A més, la reutilització d'aquests sòlids és possible fins a tres cicles, amb una lleugera disminució de l'activitat catalítica. En el capítol VII es descriuen per primera vegada les propietats fotofísiques del clúster [{Ta6Bri12}Bra2(H2O)a4]·4H2O en aigua i en aigua deuteriada. S'hi explora la fotorreactivitat amb donadors i acceptors d'electrons, amb un èmfasi especial en l'O2, i s'identifiquen les Espècies Reactives d'Oxigen (ROS) generades després de la irradiació amb llum en presència d'O2., [EN] This doctoral thesis describes the synthesis and characterization of materials based on octahedral transition-metal clusters (M6) and their hybrids with graphitic supports, such as doped carbon nitrides and graphene oxide, as well as their application in artificial photosynthesis processes. Regarding the metallic clusters, this thesis focuses on hexanuclear molybdenum clusters with internal iodide ligands and apical carboxylate ligands and their evaluation in the CO2 photoreduction reaction, as well as hexanuclear tantalum clusters with internal bromide ligands and apical aqua ligands and their evaluation in the photocatalytic water reduction reaction. Chapter I provides an introduction to the development of artificial photosynthesis and the chemistry of metal clusters, with special emphasis on octahedral molybdenum and tantalum clusters in photocatalytic CO2 reduction and water-splitting processes. Chapter II outlines the research objectives. Chapter III describes in detail all the synthetic procedures for obtaining the photocatalytic materials, as well as the instrumental techniques used for characterization and reaction monitoring throughout this doctoral work. Chapter IV presents the results from the synthesis and characterization of molybdenum clusters immobilized on iron-doped carbon nitride and their subsequent evaluation in the CO2 photoreduction reaction. The effectiveness and selectivity of these systems were assessed, focusing mainly on the production of carbon monoxide and methane. The yields obtained were considerably higher than those of similar materials reported in the literature. Chapter V presents the results derived from the synthesis and characterization of octahedral tantalum clusters and their subsequent evaluation in the light-assisted liquid-phase water reduction reaction. In this chapter, the reaction conditions were optimized for molecular hydrogen production using the response surface methodology, which provided the optimal concentration of HBr and methanol as additives in this homogeneous catalytic system. Chapter VI focuses on the results obtained from the synthesis and characterization of tantalum clusters supported on graphene oxide and their evaluation in the light-assisted gas-phase water reduction reaction. Overall, the materials exhibited high efficiency, comparable to similar systems reported in the literature for hydrogen generation. Furthermore, these solids could be reused for up to three cycles, with only a slight decrease in catalytic activity. Chapter VII reports, for the first time, the photophysical properties of the cluster [{Ta6Bri12}Bra2(H2O)a4]·4H2O in water and deuterated water. The photoreactivity with electron donors and acceptors was explored, with particular emphasis on O2, and the Reactive Oxygen Species (ROS) generated upon light irradiation in the presence of O2 were identified., Agradezco la financiación otorgada por el Programa Santiago Grisolía (Consejo Superior de Investigaciones Científicas y Generalitat Valenciana; proyecto GRISOLIA/2021/054). Además, también quiero agradecer al Ministerio de Ciencia e Innovación (proyectos TED2021-130963B-C21, PID2021-123163OB-I00) y programa Severo Ochoa (CEX2021-001230-S) financiados por MCIN/AEI/10.13039/501100011033/ y por el FEDER, “Una manera de hacer Europa.” Por supuesto: Al Instituto de Tecnología Química (ITQ UPV-CSIC) por permitir el desarrollo del mismo en sus instalaciones.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Graphene Decorated With Mo3S7 Clusters for Sensing CO2

  • Casanova-Cháfer, Juan
  • Llobet, Eduard
  • Feliz Rodriguez, Marta|||0000-0002-4429-0551
[EN] This paper reports for the first time a gas-sensitive nanohybrid based on trinuclear molybdenum sulfido clusters ((Bu4N)(2)[Mo-3(mu(3)-S)(mu-S-2)(3)Cl-6] (Mo3S7)) supported on graphene flakes (Mo3S7@Graphene). The nanomaterial, once implemented in a chemoresistive device, changes its electrical resistivity when exposed, at room temperature (RT), to toxic and harmful gases, such as hydrogen (H-2), carbon dioxide (CO2), carbon monoxide (CO), and benzene. Particularly, the Mo3S7@Graphene hybrid shows an outstanding sensing performance toward CO2. Theoretical calculations provide a better understanding of the plausible gas sensing mechanisms. These findings open the door for a new generation of molybdenum sulfido cluster-based sensors in which electronic interrogation can be implemented, advancing toward the realization of highly sensitive gas sensing., J.C.-C. gratefully acknowledges the Marie Sk & lstrok;odowska-Curie Individual Fellowship (Horizon Europe Program), grant agreement No. 101066282 "GREBOS." E.L. is supported by the Catalan Institution for Research and Advanced Studies via the 2023 Edition of the ICREA Academia Award. M.F. acknowledges the financial support by the Spanish Ministry of Science and Innovation (TED2021-130963B-C21 and CEX2021-001230-S grants) funded by MCIN/AEI/10.13039/501100011033 and FEDER A way of making Europe, and funding for open access charge: CRUE-Universitat Politecnica de Valencia. The authors gratefully acknowledge Ana Moreno Munoz and Maria Adelina Munoz Algaba for their assistance in the characterization of the samples. The Electron Microscopy Service of the UPV is also acknowledged for their help in spectroscopic identification. M.F. thanks Prof. Rosa Llusar for her comments on this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Efficient and Selective Photocatalytic Transformation of CO2 to CO with Mo6 Clusters Supported on Fe-Doped g-C3N4

  • Hernandez-Niño, Jhon Sebastian|||0000-0002-6550-7107
  • Feliz Rodriguez, Marta|||0000-0002-4429-0551
[EN] The carbon dioxide reduction reaction (CO2RR) driven by sunlight is expected to become a sustainable way of producing high-value compounds in the future. To achieve this goal, affordable and efficient photocatalysts still need to be discovered. In this work, we show that near-IR luminescent octahedral molybdenum iodido clusters decorated with isonicotinato ligands, (Bu4N)2[Mo6I8(O2CC5H4N)6] (Mo6), once combined with iron-doped carbon nitride (Fe-g-C3N4), provide the Mo6/Fe-g-C3N4 nanostructured materials, which are able to photocatalytically produce carbon monoxide (CO) from CO2 with high efficiency and selectivity. In a plausible mechanism, the Mo6 cluster acts as a photosensitizer, and its pyridine groups interact coordinatively with the embedded iron atoms, thus promoting the electronic conduction to the catalytic iron sites of the nanohybrid. The materials were characterized analytically, texturally, structurally, and spectroscopically using techniques such as inductively coupled plasma (ICP), specific surface area measurements, UV¿vis¿NIR diffuse reflectance spectra (DRS), powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FESEM) coupled with energy-dispersive X-ray spectroscopy (EDS), and photoluminescence. The CO2RR studies showed that this association induces a change in the selectivity and a significant increase in CO production compared to that produced separately by the Mo clusters and graphitic precursors. Considering the versatility of this building block strategy for preparing multicomponent hybrid nanomaterials, molybdenum metal clusters are regarded as promising catalysts for creating eco-friendly and cost-effective photocatalysts for the CO2RR, The authors thank funding resources from the Spanish Ministry of Science and Innovation (TED2021-130963B-C21, PID2021-123163OB-I00 and CEX2021-001230-S grants) funded by MCIN/AEI/10.13039/501100011033/ and FEDER, "A way of making Europe." J.S.H. gratefully acknowledges to Programa Santiago Grisolia (Consejo Superior de Investigaciones Cientificas and Generalitat Valenciana; grant number GRISOLIA/2021/054). The authors thank the technical team at the Instituto de Tecnologia Quimica for providing us with all the facilities for all the characterizations, equipment, and instrumentation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Luminescence and Generation of Reactive Oxygen Species in Solution by Ta6Br12 Clusters

  • Hernandez-Niño, Jhon Sebastian|||0000-0002-6550-7107
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
  • Feliz Rodriguez, Marta|||0000-0002-4429-0551
  • Shamshurin, Maxim
  • Benassi, Enrico
  • Sokolov, Maxim N.
[EN] An intrinsic metal cluster NIR-II emission of the {Ta6Br12}2+ aqua/hydroxocomplexes was determined in aqueous solutions under inert atmosphere. The photoluminescence (PL) is enhanced in D2O, and the lifetime scale expands from nanoseconds to microseconds. Possible cluster emission transitions have been assigned and analyzed from a computational perspective. In the presence of O2, the cluster compound kept its robustness but showed partial quenching of the PL. Stern-Volmer and laser-flash photolysis studies confirmed that quenching is mainly associated with O2 diffusion. Laser-flash photolysis experiments showed that singlet oxygen (1O2) was not detected under measurement conditions. Generation of peroxide and superoxide radical species after irradiation in D2O was confirmed by using luminol as a probe, whereas no hydroxide radical species were detected as evidenced by the emission of the 3-coumarin carboxylic acid (3-CCA) molecular sensor., This research was funded by the Spanish Ministry of Science and Innovation (TED2021-130963B-C21, PID2021-123163OB-I00 and CEX2021-001230-S grants) funded by MCIN/AEI/10.13039/501100011033/and FEDER A way of making Europe. J.S.H. gratefully acknowledges to Programa Santiago Grisolia (Consejo Superior de Investigaciones Cientificas and Generalitat Valenciana; grant number GRISOLIA/2021/054). Computational resources were kindly provided by the Laboratory of complex compounds synthesis (Nikolaev Institute of Inorganic Chemistry SB RAS; supported by the Ministry of Science and Higher Education of the Russian Federation, no. 121031700313-8). CSIC for funding for open access charge. We thank the technical team at the Instituto de Tecnologia Quimica for providing us with all the facilities for all the characterizations.