Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

MOF-derived PdMn and PdCo bimetallic systems as bifunctional electrocatalysts for overall water splitting

  • Mazarío-Santa-Pau, Jaime
  • Martínez, Jordan Santiago
  • Márquez, Inmaculada
  • Lopes, Christian Wittee
  • Agostini, Giovanni
  • Villalobos-Portillo, Eduardo
  • Bazta, Otman
  • Trasobares, Susana
  • Calvino, Jose Juan
  • Calvente, Juan Jose
  • Olloqui-Sariego, Jose Luis
  • Cerezo-Navarrete, Christian
  • Gonzalo
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] Bimetallic Metalorganic Framework (MOF)-derived PdCo and PdMn nanoparticles have been shown to be excellent bifunctional electrocatalysts for overall electrocatalytic alkaline water splitting. Through an innovative strategy combining a soft chemical (Q) transformation followed by pyrolysis (T) of PdCo-MOF and PdMn-MOF precursors, well-defined and uniformly distributed nanoparticles supported on N-doped graphitic carbon were synthesized (PdCo-QT and PdMn-QT, respectively). The influence of the first row transition metal into the bimetallic nanoparticles on the electrocatalytic activity for both electrocatalytic hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) was assessed. Comprehensive characterization using TEM/STEM, PXRD, Raman, XAS and XPS revealed the ultimate structural and compositional features of the synthesized materials. Notably, the bimetallic PdCo-based catalyst demonstrated the best electrocatalytic performance, exhibiting the lowest Tafel slopes for both HER and OER processes, along with superior thermodynamic and kinetic metrics compared to the bimetallic PdMn and monometallic Pd nanoparticles. The exceptional catalytic activity of the PdCo-QT electrode competes with that of benchmark materials, attributed to a synergistic effect between Pd and the secondary metal (Co), likely forming Pd-O(OH)-Co active centers. Moreover, operando and after electrocatalysis characterizations of the electrodes validate the remarkable stability and efficiency of PdCo-QT, underscoring its potential for practical water-splitting applications., Financial support by Severo Ochoa center of excellence program (CEX2021-001230-S) is gratefully acknowledged. The authors thank the financial support from the Spanish Government (PID2022-140111OB-I00, PID2021-126799NB-I00, TED2021-130191B-C41, TED2021-130191B-C42, and TED2021-130191B-C44 funded by MCIN/AEI/10.13039/501100011033 and European Union Next Generation EU/PRTR). This study forms part of the Advanced Materials program and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047). In addition, this work has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 101022507. C.W.L. acknowledges the National Council for Scientific and Technological Development-CNPq/Brazil (443418/2023-3) and PPGQ-UFPR for financial support. HR-STEM studies were performed at the DME-UCA node of the ELECMI Spanish Unique Infrastructure (ICTS) for Electron Microscopy of Materials. Some of these experiments were performed NOTOS beamlines at ALBA Synchrotron with the collaboration of ALBA staff (Carlos Escudero, and Carlo Marini).r 130191B-C42, and TED2021-130191B-C44 funded by MCIN/AEI/10.13039/501100011033 and European Union Next Generation EU/PRTR) . This study forms part of the Advanced Materials program and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047) . In addition, this work has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 101022507. C.W.L. acknowledges the National Council for Scientific and Technological Development-CNPq/Brazil (443418/2023-3) and PPGQ-UFPR for financial support. HR-STEM studies were performed at the DME-UCA node of the ELECMI Spanish Unique Infrastructure (ICTS) for Electron Microscopy of Materials. Some of these experiments were performed NOTOS beamlines at ALBA Synchrotron with the collaboration of ALBA staff (Carlos Escudero, and Carlo Marini) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Efficient Alkyne Semihydrogenation Catalysis Enabled by Synergistic Chemical and Thermal Modifications of a PdIn MOF

  • Martínez, Jordan Santiago
  • Mazarío, Jaime
  • Wittee Lopes, Christian
  • Trasobares, Susana
  • Calvino Gamez, José Juan
  • Agostini, Giovanni
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] Recently, there has been a growing interest in using MOF templating to synthesize heterogeneous catalysts based on metal nanoparticles on carbonaceous supports. Unlike the common approach of direct pyrolysis of PdIn-MOFs at high temperatures, this work proposes a reductive chemical treatment under mild conditions before pyrolysis (resulting in PdIn-QT). The resulting material (PdIn-QT) underwent comprehensive characterization via state-of-the-art aberration-corrected electron microscopy, N2 physisorption, X-ray absorption spectroscopy, Raman, X-ray photoelectron spectroscopy, and X-ray diffraction. These analyses have proven the existence of PdIn bimetallic nanoparticles supported on N-doped carbon. In situ DRIFT spectroscopy reveals the advantageous role of indium (In) in regulating Pd activity in alkyne semihydrogenation. Notably, incorporating a soft nucleation step before pyrolysis enhances surface area, porosity, and nitrogen content compared to direct MOF pyrolysis. The optimized material exhibits outstanding catalytic performance with 96% phenylacetylene conversion and 96% selectivity to phenylethylene in the fifth cycle under mild conditions (5 mmol phenylacetylene, 7 mg cat, 5 mL EtOH, R.T., 1 H2 bar)., The authors thank the financial support from the Spanish Government (RTI2018-096399-A-I00, PID2022-140111OB-I00, PID2020-113006-RB-I00, TED2021-130191B-C41, and TED2021-130191B-C44) funded by MCIN/AEI/10.13039/501100011033. This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 101022507 and NextGenerationEU/PRTR). HR-STEM studies were performed at the DME-UCA node of the ELECMI Spanish Unique Infrastructure (ICTS) for Electron Microscopy of Materials. Some of these experiments were performed at CLAESS and NOTOS beamlines at ALBA Synchrotron with the collaboration of ALBA staff (Carlos Escudero, Carlo Marini). J.M. Salas is acknowledged for experimental contributions to FTIR measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Decoding the Role of Isolated Ga+ in PdGa@MFI Catalyst Promoting a Direct CO2 Hydrogenation Path to DME

  • Zhao, Minjie
  • Diaconescu, Vlad Martin
  • Simonelli, Laura
  • Haro, ML
  • Calvino, JJ
  • Gómez-Acosta, Daviel|||0000-0003-0010-4507
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
[EN] This work presents a strategy to control not only the distance and proximity of active sites at the atomic or nanoscale but also the nature of sites in zeolite-based catalysts, promoting the coupling rate of surface intermediate species and accordingly the formation rate of dimethyl ether (DME) by a direct CO2 hydrogenation path. We use a one-pot synthesis strategy and a thermal-induced detachment process of framework elements, such as Ga3+ ions, to stabilize PdGa alloys and Ga+ sites in close proximity to Br & oslash;nsted acid sites under reductive conditions. Using this strategy, a production of oxygenates of up to 42,864 gMeOH+DME<middle dot>kgPd -1<middle dot>h-1 at 45 bar, 260 degrees C, and WHSV = 15,000 mL<middle dot>gcat -1<middle dot>h-1, is obtained with 80% selectivity to oxygenated (19% methanol/61% DME), outperforming the most active Pd-based CO2 hydrogenation catalysts in the literature. Time-resolved kinetic studies, in situ X-ray adsorption, and in situ and operando IR offer strong proof of the key role of isolated Ga+ Lewis acid sites in close proximity to Br & oslash;nsted acid sites in stabilizing monoformate intermediate species and facilitating the direct production of DME. Finally, this work highlights the key role of the zeolite in metal confinement, conferring excellent stability, oxidation resistance, hydrophilicity, and close proximity of active sites together with the stabilization of low-coordinated Lewis acid sites., P.C. thanks the Ministerio de Ciencia, Innovacion y Universidades, grant no. PID2021-1262350B-C31, and the Generalitat Valenciana (GVA), grant no. CIAICO/2021/2138. P.C. thanks the Advanced Materials programme supported by MCIN with funding from the European Union Next Generation EU (PRTR-C17.11) (TED2021-130756B-C32) and by the Generalitat Valenciana (ref MFA/2022/016). M.Z. acknowledges the China Scholarship Council (CSC) for the fellowship. XAS experiments were performed at the ALBA Synchrotron (BL-22 CL AE SS) with the collaboration of the ALBA staff as part of experiment 2022086958. HR-HAADF-STEM measurements were performed at DME-UCA at the Cadiz University. M.L.H. and J.J.C. thank financial support from Projects funded by MICIU/AEI/10.13030/501100011033, PID2020-113006-RB-I00, and PID2022-142312NB-I00, funded by MCIN/AEI/10.13039/501100011033, and by "ERDF A way of making Europe". Project TED2021-130191B-C44, funded by MCIN/AEI/10.13039/501100011033 and the European Union Next Generation EU/PRTR, is also acknowledged. STEM experiments were recorded at the DME-UCA Node of the Spanish Singular Infrastructure for Electron Microscopy of Materials (ICTS ELECMI).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Understanding the potential-induced activation of a cobalt MOF electrocatalyst for the oxygen evolution reaction

  • Gutiérrez-Tarriño, Silvia
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
  • Portorreal-Bottier, Arismendy
  • Trasobares, Susana
  • Calvente, Juan José
  • Calvino, Juan José
  • Olloqui-Sariego, José Luis
[EN] Metal-organic frameworks (MOFs) are attractive porous materials for electrocatalytic applications associated with carbon-free energy storage and conversion. This type of material usually requires a post-treatment to be used as electrocatalyst. The present work comprehensively investigates the electrochemical activation of a cobalt-MOF@Nafion composite that produces outstanding electrocatalytic performance for the water oxidation reaction at neutral pH. A detailed electrochemical characterization reveals that the electroactivation of the composite requires the participation of the oxygen evolution reaction (OER) and leads to a significant increase in the electroactive population of cobalt centers. It is shown that an increase of the applied activation potential in the OER region results in a faster electroactivation of the Co-MOF without affecting the intrinsic electrocatalytic properties of the active cobalt centers, as evidenced by the unique linear correlation between the electrocatalytic OER current and the population of electroactive cobalt. In addition, at structural level, it is shown that the electrochemical activation causes the partial disruption of the Nafion adlayer, as well as morphological changes of the Co-MOF particles from a compact, rounded morphology, before electrochemical activation, to a more open and expanded structure, after electroactivation; with the concomitant increase of the number of surface--exposed cobalt centers. Interestingly, these cobalt centers retain their coordinative chemistry and their laminar distribution in the nanosheets at the nanoscale, which is consistent with the preservation of their intrinsic electrocatalytic activity after potential-induced activation. In this scenario, these results suggest that only the electroactivated cobalt centers with good accessibility to the electrolyte are electrochemically active. This work provides a better understanding of the processes and structural changes underlying the electrochemical acti-vation at neutral pH of a Co-MOF for boosting the electrocatalytic water oxidation reaction., Authors thank the financial support by the Spanish Government (RTI2018-096399-A-I00, PID2020-113006-RB-I00, PID2021-126799NB-I00, TED2021-130191B-C41, TED2021-130191B-C42 and TED2021-130191B-C44 funded by MCIN/AEI/10.13039/501100011033) and Junta de Andalucia (P20-01027 and PYC 20 RE 060 UAL). The authors acknowledge funding from the European Union's Horizon 2020 research and innovation program under Grant 823717-ESTEEM3. Electron microscopy studies were performed at the DME-UCA node of the Spanish Unique Infrastructure (ICTS) on Electron Microscopy of Materials ELECMI. The authors thank Dr. A. Raya-Baron for his support on this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Building lactams by highly selective hydrodeoxygenation of cyclic imides using an alumina-supported AgRe bimetallic nanocatalyst

  • Lluna-Galán, Carles
  • Arango-Daza, Juan Camilo
  • Sun, Rong
  • Calvino, Jose Juan
  • Simonelli, Laura
  • Adam, Rosa
  • Gómez-Acosta, Daviel|||0000-0003-0010-4507
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Cabrero Antonino, Jose Ramón|||0000-0001-9628-9803
[EN] The rational design of robust nanocatalysts containing the suitable active sites for building relevant organic compounds, such as lactams, is a desired approximation towards the development of a sustainable fine chemistry field. In that sense, the design of a proper nanomaterial able to mediate the selective hydrodeoxygenation of cyclic imides to lactams with high tolerance to the preservation of aromatic rings remains rather unexplored. Here, we show the design of a bimetallic AgRe nanomaterial with notable activity and selectivity to mediate this transformation affording more than 60 lactams from the corresponding imides. Interestingly, in this work we disclose that the optimal AgRe nanocatalyst is constituted by AgReO4 nanoaggregates that undergo an in situ hydrogenative dispersion to form the active centers composed by Ag0 nanoparticles and ReOx species. Deep characterization, together with kinetic and mechanistic studies, have revealed that the intimate Ag-Re contact intrinsic to AgReO4 species is key for the formation of the most active catalytic sites and the proper bimetallic cooperation required for mediating the desired process., This work was supported by Generalitat Valenciana through SEJI (Subvencions Excelencia Juniors Investigadors, grants SEJI/2019/006 and SEJI/2020/013), PROMETEO/2021/077 and CIAICO/2021/2138 programs and a program from "La Caixa" Foundation (ID 100010434), fellowship code LCF/BQ/PI18/11630023. The work was also funded by Spanish Government via MICINN with RETOS I + D + I program (PID2019-109656RA-I0 / AEI / 10.13039/501100011033), grants CNS2023-144172, PID2020-113006-RB-I00, PID2021-1262350B-C31, TED2021-130191B-C44 and TED2021-130756B-C32 funded by MICIU/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR. Financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is also gratefully acknowledged. This study forms part of the Advanced Materials program supported by MCIN with funding from European Union Next Generation EU (PRTR-C17.11) and Generalitat Valenciana (grant MFA/2022/016). R. A. and J. R. C.-A. thank to MICINN (Spanish Government) for two Ramon y Cajal contracts (ref. RYC2020-029493-I and RYC-2017-22717). XAS experiments were performed at BL22-CLAESS beamline at ALBA Synchrotron with the collaboration of ALBA staff (proposal 2022075907). ELECMI-ICTS facilities (proposal ELC402023) are also acknowledged for electron microscopy experiments.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multifunctional Heterogeneous Cobalt Catalyst for the One-Pot Synthesis of Benzimidazoles by Reductive Coupling of Dinitroarenes with Aldehydes in Water

  • Río-Rodríguez, José Luis del
  • Chinchilla, Lidia E.
  • Holgado, J.P.
  • Villar-García, Ignacio
  • Pérez Dieste, Virginia
  • Calvino, José Juan
  • Gutiérrez-Tarriño, Silvia
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] The endeavor of sustainable chemistry has led to significant advancements in green methodologies aimed at minimizing environmental impact while maximizing efficiency. Herein, a straightforward synthesis of benzimidazoles by reductive coupling of o-dinitroarenes with aldehydes is reported for the first time in aqueous media while using a non-noble metal catalyst. This work demonstrates that the combination of nitrogen and phosphorous ligands in the synthesis of supported heteroatomincorporated Co nanoparticles is crucial for obtaining the desired benzimidazoles. The process achieves >99% conversion, >99% chemoselectivity and stability for the reduction of dinitroarenes using water as the solvent and hydrogen as the reductant under mild reaction conditions. The robustness of the catalyst has been investigated using several advanced techniques such as HRTEM, HAADF-STEM, XEDS, EELS, and NAP-XPS. In fact, we have shown that the introduction of N and P dopants prevents metal leaching and the sintering of the cobalt nanoparticles. Finally, to explore the general catalytic performance, a wide range of substituted dinitroarenes and benzaldehydes were evaluated, yielding benzimidazoles with competitive and scalable results, including MBIB (94% yield), which is a compound of pharmaceutical interest., Financial support by Severo Ochoa centre of excellence program (CEX2021-001230-S) is gratefully acknowledged. The authors thank the financial support from the Spanish Government (PID2022-140111OB-I00, PID2020-113006-RB-I00, TED2021-130191B-C41 and TED2021-130191B-C44, PID2020-119946RB-I00, funded by MCIN/AEI/ 10.13039/501100011033 and European Union NextGenerationEU/PRTR). This study forms part of the Advanced Materials programme and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047). In addition, this work has received funding from the European Union s Horizon 2020 research and innovation program under grant agreement No 101022507. J.L.R.-R. thanks the MCIU for his FPU PhD contract FPU21/02562. SGT thanks the Universitat Politècnica de València for her postdoctoral contract PAID-10-23. IJVG would like to acknowledge OSMIBatt - CNS2022-135285 for funding. HR-STEM studies were performed at the DME-UCA node of the ELECMI Spanish Unique Infrastructure (ICTS) for Electron Microscopy of Materials. Some of these experiments were performed at CIRCE (beamtime 2022096991) beamline at ALBA Synchrotron with the collaboration of ALBA staff.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

MOF-Derived PdCo and PdMn Systems as Versatile Catalysts in Alkyne Semihydrogenation

  • Martínez, Jordan Santiago
  • Carpisassi, Luigi
  • Mazarío, Jaime
  • Wittee Lopes, Christian
  • Mora-Moreno, Carmen
  • Trasobares, Susana
  • Vaccaro, Luigi
  • Calvino, Juan José
  • Agostini, Giovanni
  • Gonzalo
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] This study investigates the structure and catalytic properties of bimetallic nanocomposites derived from PdCo- and PdMn-based metal-organic frameworks. These materials, synthesized via chemical (Q) and thermal treatments (T), resulted in PdCo-QT and PdMn-QT catalysts containing Pd-based nanoparticles modified with Co or Mn and supported on N-doped carbon. Detailed characterization techniques confirm these complex structures, including high-resolution transmission electron microscopy, scanning transmission electron microscopy energy-dispersive X-ray spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and X-ray absorption spectroscopy. The catalytic performances of these materials were evaluated for the selective semihydrogenation of phenylacetylene and 4-octyne under soft conditions (1 H2 bar, room temperature) in batch reactors, demonstrating very high selectivity (>= 95 mol %) toward alkenes at high conversion levels (>= 94 mol %). Moreover, they displayed significant stability after five catalytic cycles with minimal leaching and highly competitive values of alkyne productivity in the semihydrogenation of phenylacetylene. The study also explored the potential of these catalysts in continuous gas-phase reactions, where PdCo-QT demonstrated remarkable catalytic activity and selectivity with a high gas hourly space velocity., Financial support by Severo Ochoa centre of excellence program (CEX2021-001230-S) is gratefully acknowledged. The authors thank the financial support from the Spanish Government (PID2022-140111OB-I00, TED2021-130191B-C41, and TED2021-130191B-C44 funded by MCIN/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR). This study forms part of the Advanced Materials program and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047). In addition, this work has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 101022507. C.W.L. acknowledges the National Council for Scientific and Technological Development-CNPq/Brazil (443418/2023-3) and PPGQ-UFPR for financial support. The Italian Ministry of University and Research (MUR) is also thanked for PRIN-PNRR 2022 project "P2022XKWH7-CircularWaste" and PRIN P20223ARWAY-REWIND. HR-STEM studies were performed at the DME-UCA node of the ELECMI Spanish Unique Infrastructure (ICTS) for Electron Microscopy of Materials. Some of these experiments were performed at CLAESS and NOTOS beamlines at ALBA Synchrotron with the collaboration of ALBA staff (Eduardo Villalobos, Carlos Escudero, and Carlo Marini). A. Yuste Rodrigo is acknowledged for experimental contributions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Developing and understanding Leaching-Resistant cobalt nanoparticles via N/P incorporation for liquid phase hydroformylation

  • Galdeano-Ruano, Carmen Piedad
  • Lopes, Christian W.
  • Mazarío, Jaime
  • Chinchilla, Lidia E.
  • Agostini, Giovanni
  • Calvino, JJ
  • Holgado, Juan P.
  • Rodriguez-Castellon, Enrique
  • Roldan, Alberto
  • Gutiérrez-Tarriño, Silvia
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] The ultimate target in heterogeneous catalysis is the achievement of robust, resilient and highly efficient materials capable of resisting industrial reaction conditions. Pursuing that goal in liquid -phase hydroformylation poses a unique challenge due to carbon monoxide -induced metal carbonyl species formation, which is directly related to the formation of active homogeneous catalysts by metal leaching. Herein, supported heteroatomincorporated (P and N) Co nanoparticles were developed to enhance the resistance compared with bare Co nanoparticles. The samples underwent characterization using operando XPS, XAS and HR electron microscopy. Overall, P- and N -doped catalysts increased reusability and suppressed leaching. Among the studied catalysts, the one with N as a dopant, CoNx@NC, presents excellent catalytic results for a Co -based catalyst, with a 94% conversion and a selectivity to aldehydes of 80% in only 7.5 h. Even under milder conditions, this catalyst outperformed existing benchmarks in Turnover Numbers (TON) and productivity. In addition, computational simulations provided atomistic insights, shedding light on the remarkable resistance of small Co clusters interacting with N -doped carbon patches., The authors thank the financial support from the Spanish Government (RTI2018-096399-A-I00, PID2022-140111OB-I00, PID2020-113006-RB-I00, TED2021-130191B-C41, TED2021-130756B-C31 and TED2021-130191B-C44, PID2020-119946RB-I00, US-1263455 funded by MCIN/AEI/10.13039/501100011033 and European Union Next- GenerationEU/PRTR) . This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 101022507. HR-STEM studies were performed at the DME-UCA node of the ELECMI Spanish Unique Infrastructure (ICTS) for Electron Microscopy of Materials. We also acknowledge the supercomputing Wales for access to the Hawk HPC facility, part-funded by the European Regional Development Fund via the Welsh Government.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Developing and understanding Leaching-Resistant cobalt nanoparticles via N/P incorporation for liquid phase hydroformylation

  • Galdeano Ruano, Carmen
  • Gutiérrez Tarriño, Silvia
  • Lopes, Christian W.
  • Mazarío, Jaime
  • Chinchilla Reyes, Lidia Esther
  • Agostini, Giovanni
  • Calvino Gámez, José Juan
The ultimate target in heterogeneous catalysis is the achievement of robust, resilient and highly efficient materials capable of resisting industrial reaction conditions. Pursuing that goal in liquid-phase hydroformylation poses a unique challenge due to carbon monoxide-induced metal carbonyl species formation, which is directly related to the formation of active homogeneous catalysts by metal leaching. Herein, supported heteroatomincorporated (P and N) Co nanoparticles were developed to enhance the resistance compared with bare Co nanoparticles. The samples underwent characterization using operando XPS, XAS and HR electron microscopy. Overall, P- and N-doped catalysts increased reusability and suppressed leaching. Among the studied catalysts, the one with N as a dopant, CoNx@NC, presents excellent catalytic results for a Co-based catalyst, with a 94% conversion and a selectivity to aldehydes of 80% in only 7.5 h. Even under milder conditions, this catalyst outperformed existing benchmarks in Turnover Numbers (TON) and productivity. In addition, computational simulations provided atomistic insights, shedding light on the remarkable resistance of small Co clusters interacting with N-doped carbon patches.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Understanding the potential-induced activation of a cobalt MOF electrocatalyst for the oxygen evolution reaction

  • Gutiérrez Tarriño, Silvia
  • Portorreal Bottier, Arismendy
  • Calvente, Juan José
  • Olloqui Sariego, José Luis
  • Oña Burgos, Pascual
  • Trasobares Llorente, Susana
  • Calvino Gámez, José Juan
Metal–organic frameworks (MOFs) are attractive porous materials for electrocatalytic applications associated with carbon-free energy storage and conversion. This type of material usually requires a post-treatment to be used as electrocatalyst. The present work comprehensively investigates the electrochemical activation of a cobalt-MOF@Nafion composite that produces outstanding electrocatalytic performance for the water oxidation reaction at neutral pH. A detailed electrochemical characterization reveals that the electroactivation of the composite requires the participation of the oxygen evolution reaction (OER) and leads to a significant increase in the electroactive population of cobalt centers. It is shown that an increase of the applied activation potential in the OER region results in a faster electroactivation of the Co-MOF without affecting the intrinsic electrocatalytic properties of the active cobalt centers, as evidenced by the unique linear correlation between the electrocatalytic OER current and the population of electroactive cobalt. In addition, at structural level, it is shown that the electrochemical activation causes the partial disruption of the Nafion adlayer, as well as morphological changes of the Co–MOF particles from a compact, rounded morphology, before electrochemical activation, to a more open and expanded structure, after electroactivation; with the concomitant increase of the number of surface–exposed cobalt centers. Interestingly, these cobalt centers retain their coordinative chemistry and their laminar distribution in the nanosheets at the nanoscale, which is consistent with the preservation of their intrinsic electrocatalytic activity after potential–induced activation. In this scenario, these results suggest that only the electroactivated cobalt centers with good accessibility to the electrolyte are electrochemically active. This work provides a better understanding of the processes and structural changes underlying the electrochemical activation at neutral pH of a Co–MOF for boosting the electrocatalytic water oxidation reaction, 9 páginas
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Direct quantitative assessment of single-atom metal sites supported on powder catalysts

  • Aniceto-Ocaña, Paula
  • Marqueses Rodríguez, José
  • Pérez Omil, José Antonio
  • Calvino Gámez, José Juan
  • Castillo González, Carmen Esther
  • López Haro, Miguel
Rational design of effective catalyst demands a profound understanding of active-site structures. Single-atom supported powder catalysts, depicting unique features like enhanced metal dispersion, hold promise in different applications. Here, we present an approach to directly quantify the detailed structural nature of metal sites in single-atom, high surface area, powder catalysts. By combining advanced high-resolution scanning-transmission electron microscopy, deep learning and density functional theory calculations, we determine, with statistical significance, the exact location and coordination environment of Pd single-atoms supported on MgO nanoplates. Our findings reveal a preferential interaction of Pd single-atoms with cationic vacancies (V-centers), followed by occupation of anionic defects on the {001} MgO surface. The former interaction results in stabilization of PdO species within V-centers, while partially embedded Pd states are found in F-defects. This methodology opens a route to the ultimate structural analysis of metal-support interaction effects, key in the design of advanced nanocatalysts for sustainable and energy-efficient processes. Metal active sites are important in catalysts to function in various applications. Here, the detailed structural nature of single-atom metal sites is directly quantified using a combination of high-resolution microscopy, deep learning, and theoretical calculation methods.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Efficient Alkyne Semihydrogenation Catalysis Enabled by Synergistic Chemical and Thermal Modifications of a PdIn MOF

  • Martínez, J. S.
  • Mazarío, J.
  • Lopes, C. W.
  • Trasobares Llorente, Susana
  • Calvino Gámez, José Juan
  • Agostini, Giovanni
  • Oña Burgos, Pascual
Recently, there has been a growing interest in using MOF templating to synthesize heterogeneous catalysts based on metal nanoparticles on carbonaceous supports. Unlike the common approach of direct pyrolysis of PdIn-MOFs at high temperatures, this work proposes a reductive chemical treatment under mild conditions before pyrolysis (resulting in PdIn-QT). The resulting material (PdIn-QT) underwent comprehensive characterization via state-of-the-art aberration-corrected electron microscopy, N2 physisorption, X-ray absorption spectroscopy, Raman, X-ray photoelectron spectroscopy, and X-ray diffraction. These analyses have proven the existence of PdIn bimetallic nanoparticles supported on N-doped carbon. In situ DRIFT spectroscopy reveals the advantageous role of indium (In) in regulating Pd activity in alkyne semihydrogenation. Notably, incorporating a soft nucleation step before pyrolysis enhances surface area, porosity, and nitrogen content compared to direct MOF pyrolysis. The optimized material exhibits outstanding catalytic performance with 96% phenylacetylene conversion and 96% selectivity to phenylethylene in the fifth cycle under mild conditions (5 mmol phenylacetylene, 7 mg cat, 5 mL EtOH, R.T., 1 H2 bar).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Understanding the potential-induced activation of a cobalt MOF electrocatalyst for the oxygen evolution reaction

  • Gutiérrez-Tarriño, S.
  • Portorreal-Bottier, Arismendy
  • Trasobares, Susana
  • Calvente, Juan José
  • Calvino, Jose J.
  • Olloqui-Sariego, José Luis
  • Oña-Burgos, Pascual
Metal–organic frameworks (MOFs) are attractive porous materials for electrocatalytic applications associated with carbon-free energy storage and conversion. This type of material usually requires a post-treatment to be used as electrocatalyst. The present work comprehensively investigates the electrochemical activation of a cobalt-MOF@Nafion composite that produces outstanding electrocatalytic performance for the water oxidation reaction at neutral pH. A detailed electrochemical characterization reveals that the electroactivation of the composite requires the participation of the oxygen evolution reaction (OER) and leads to a significant increase in the electroactive population of cobalt centers. It is shown that an increase of the applied activation potential in the OER region results in a faster electroactivation of the Co-MOF without affecting the intrinsic electrocatalytic properties of the active cobalt centers, as evidenced by the unique linear correlation between the electrocatalytic OER current and the population of electroactive cobalt. In addition, at structural level, it is shown that the electrochemical activation causes the partial disruption of the Nafion adlayer, as well as morphological changes of the Co–MOF particles from a compact, rounded morphology, before electrochemical activation, to a more open and expanded structure, after electroactivation; with the concomitant increase of the number of surface–exposed cobalt centers. Interestingly, these cobalt centers retain their coordinative chemistry and their laminar distribution in the nanosheets at the nanoscale, which is consistent with the preservation of their intrinsic electrocatalytic activity after potential–induced activation. In this scenario, these results suggest that only the electroactivated cobalt centers with good accessibility to the electrolyte are electrochemically active. This work provides a better understanding of the processes and structural changes underlying the electrochemical activation at neutral pH of a Co–MOF for boosting the electrocatalytic water oxidation reaction., Authors thank the financial support by the Spanish Government (RTI2018-096399-A-I00, PID2020-113006RB-I00, PID2021-126799NB-I00, TED2021-130191B-C41, TED2021-130191B-C42 and TED2021-130191B-C44 funded by MCIN/AEI/ 10.13039/501100011033) and Junta de Andalucía (P20-01027 and PYC 20 RE 060 UAL). The authors acknowledge funding from the European Union’s Horizon 2020 research and innovation program under Grant 823717-ESTEEM3. Electron microscopy studies were performed at the DME-UCA node of the Spanish Unique Infrastructure (ICTS) on Electron Microscopy of Materials ELECMI. The authors thank Dr. A. Raya-Baron for his support on this work., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Developing and understanding Leaching-Resistant cobalt nanoparticles via N/P incorporation for liquid phase hydroformylation

  • Galdeano-Ruano, Carmen P.
  • Gutiérrez-Tarriño, Silvia
  • Lopes, Christian Wittee
  • Mazarío, Jaime
  • Chinchilla, Lidia E.
  • Agostini, Giovanni
  • Calvino-Gámez, José Juan
  • Holgado, J. P.
  • Rodríguez-Castellón, Enrique
  • Roldán, Alberto
  • Oña-Burgos, Pascual
The ultimate target in heterogeneous catalysis is the achievement of robust, resilient and highly efficient materials capable of resisting industrial reaction conditions. Pursuing that goal in liquid-phase hydroformylation poses a unique challenge due to carbon monoxide-induced metal carbonyl species formation, which is directly related to the formation of active homogeneous catalysts by metal leaching. Herein, supported heteroatom-incorporated (P and N) Co nanoparticles were developed to enhance the resistance compared with bare Co nanoparticles. The samples underwent characterization using operando XPS, XAS and HR electron microscopy. Overall, P- and N-doped catalysts increased reusability and suppressed leaching. Among the studied catalysts, the one with N as a dopant, CoN@NC, presents excellent catalytic results for a Co-based catalyst, with a 94% conversion and a selectivity to aldehydes of 80% in only 7.5 h. Even under milder conditions, this catalyst outperformed existing benchmarks in Turnover Numbers (TON) and productivity. In addition, computational simulations provided atomistic insights, shedding light on the remarkable resistance of small Co clusters interacting with N-doped carbon patches., The authors thank the financial support from the Spanish Government (RTI2018-096399-A-I00, PID2022-140111OB-I00, PID2020-113006-RB-I00, TED2021-130191B-C41, TED2021-130756B-C31 and TED2021-130191B-C44, PID2020-119946RB-I00, US-1263455funded by MCIN/AEI/ 10.13039/501100011033 and European Union NextGenerationEU/PRTR). This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 101022507. HR-STEM studies were performed at the DME-UCA node of the ELECMI Spanish Unique Infrastructure (ICTS) for Electron Microscopy of Materials. We also acknowledge the supercomputing Wales for access to the Hawk HPC facility, part-funded by the European Regional Development Fund via the Welsh Government. Some of these experiments were performed at CLAESS (beamtime 2021095439) and CIRCE (beamtime 2022096991) beamlines at ALBA Synchrotron with the collaboration of ALBA staff (Virginia Pérez, Ignacio Villar and Carlo Marini)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multifunctional Heterogeneous Cobalt Catalyst for the One-Pot Synthesis of Benzimidazoles by Reductive Coupling of Dinitroarenes with Aldehydes in Water

  • Del Río-Rodríguez, José Luis
  • Gutiérrez-Tarriño, Silvia
  • Chinchilla, Lidia E
  • Holgado, Juan Pedro
  • Villar-García, Ignacio J
  • Pérez-Dieste, Virginia
  • Calvino, Jose J
  • Oña-Burgos, Pascual
The endeavor of sustainable chemistry has led to significant advancements in green methodologies aimed at minimizing environmental impact while maximizing efficiency. Herein, a straightforward synthesis of benzimidazoles by reductive coupling of o-dinitroarenes with aldehydes is reported for the first time in aqueous media while using a non-noble metal catalyst. This work demonstrates that the combination of nitrogen and phosphorous ligands in the synthesis of supported heteroatom-incorporated Co nanoparticles is crucial for obtaining the desired benzimidazoles. The process achieves >99 % conversion, >99 % chemoselectivity and stability for the reduction of dinitroarenes using water as the solvent and hydrogen as the reductant under mild reaction conditions. The robustness of the catalyst has been investigated using several advanced techniques such as HRTEM, HAADF-STEM, XEDS, EELS, and NAP-XPS. In fact, we have shown that the introduction of N and P dopants prevents metal leaching and the sintering of the cobalt nanoparticles. Finally, to explore the general catalytic performance, a wide range of substituted dinitroarenes and benzaldehydes were evaluated, yielding benzimidazoles with competitive and scalable results, including MBIB (94 % yield), which is a compound of pharmaceutical interest., Financial support by Severo Ochoa centre of excellence program (CEX2021-001230-S) is gratefully acknowledged. The authors thank the financial support from the Spanish Government (PID2022-140111OB-I00, PID2020-113006-RB-I00, TED2021-130191B-C41 and TED2021-130191B-C44, PID2020-119946RB-I00, funded by MCIN/AEI/ 10.13039/501100011033 and European Union NextGenerationEU/PRTR). This study forms part of the Advanced Materials programme and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047). In addition, this work has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 101022507. J.L.R.-R. thanks the MCIU for his FPU PhD contract FPU21/02562. SGT thanks the Universitat Politècnica de València for her postdoctoral contract PAID-10-23. IJVG would like to acknowledge OSMIBatt - CNS2022-135285 for funding. HR-STEM studies were performed at the DME-UCA node of the ELECMI Spanish Unique Infrastructure (ICTS) for Electron Microscopy of Materials. Some of these experiments were performed at CIRCE (beamtime 2022096991) beamline at ALBA Synchrotron with the collaboration of ALBA staff., Peer reviewed