Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 26
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Upcycling Carrot and Broccoli Industrial Residues for Sponge Cake Formulations: Effect of Replacement Level in Wheat and Gluten-Free Systems

  • Barrera Puigdollers, Cristina|||0000-0003-4408-3541
  • Bas-Bellver, Claudia Isabel
  • Seguí Gil, Lucía|||0000-0002-2711-9445
[EN] Fruit and vegetable processing generates large amounts of underutilized waste that can be valorized as functional food ingredients. This study evaluated the effects of incorporating hot-air-dried powders obtained from carrot and broccoli industrial residues on the color, texture, antioxidant properties, and other physicochemical attributes of sponge cakes formulated with wheat flour (gluten-containing) and gluten-free chickpea (legume)- and rice (cereal)-based flours. Cakes containing no vegetable powder or 5, 10, 20 or 30% flour replacement by vegetable powder were evaluated within 24 h after baking and after one week of storage. Overall, the effects of vegetable powder incorporation depended on flour type, powder type, and replacement level. Carrot powder improved water retention and preserved cake height, whereas broccoli powder produced denser structures with reduced expansion. Both powders enhanced phenolic and flavonoid contents and antioxidant activity in a dose-dependent manner, with broccoli powder showing the greatest effect. Storage had limited effects on antioxidant properties but increased hardness, with carrot powder mitigating firmness development in chickpea-based cakes. Considering the interest in developing gluten-free products, rice-based cakes with 20% flour replacement by carrot powder emerged as promising formulations, showing characteristics closer to those of wheat-based control cakes while providing enhanced antioxidant properties., This research was funded by Universitat Politècnica de València under programmes PAID10-23 and PAID-06-24 (Pretramientos termofísicos y biológicos para la mejora de la funcionalidad de productos en polvo obtenidos a partir de residuos de hortalizas, y valoración de su aplicación en el sector agroalimentario).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mechanical characterization and ML-based prediction of 3D-printed PLA+: effects of infill pattern, infill density, and orientation

  • Llidó Barragán, Alexandra|||0009-0006-4847-8048
  • Unamuno-Garay, Aritz
  • Ferrándiz Bou, Santiago|||0000-0001-7137-9298
  • López-Martínez, Juan|||0000-0001-6904-2282
  • Pavón-Vargas, Cristina Paola|||0000-0003-2902-0059
[EN] Additive manufacturing (AM) enables the fabrication of lightweight, customizable components. Among its technologies, Fused Filament Fabrication (FFF) stands out for simplicity, low cost, and versatility. This work investigates how infill pattern, density, and raster angle affect PLA+ specimens using a combined experimental¿computational approach that integrates mechanical testing, statistical analysis (ANOVA), and machine learning (ML). Specimens were printed with a Prusa i3 MK3+under FFF conditions, evaluating four infill patterns (Honeycomb, Grid, Triangles, Gyroid), four density levels (20¿80%), and three raster angles (0°, 45°, 90°) in a full factorial design. Tensile, impact, and stiffness tests showed infill density as the dominant factor, accounting for 61.7% of the variance in tensile strength and 57.1% in impact strength, followed by infill pattern and raster angle. Significant interactions (p < 0.05) confirmed that mechanical behaviour depends on parameter combinations rather than individual factors. The highest tensile strength (52.3 MPa) and elongation at break (9.8%) were obtained with the Honeycomb pattern at 80% density and 0° raster angle, while impact strength peaked at 45° raster angle. The main contribution is the integration of a systematic full-factorial experimental design with ML models (CatBoost and XGBoost) to analyze and predict the mechanical response of FFF-printed structures. The results establish a hierarchy of parameter influence: infill density governs mechanical performance, followed by infill pattern and raster angle. This framework identifies parameter combinations that balance strength, impact strength, and manufacturability, while predicting the mechanical properties of untested printing configurations., Alexandra Llidó Barragán gratefully acknowledges the Universitat Politècnica de València for the support provided through the predoctoral grant PAID-01-22. Cristina Pavon also acknowledges the postdoctoral grant PAID-10-23 from Universitat Politècnica de València. Funding for open access charge: CRUE Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of covalent adaptable networks Based on disulfide exchange through broadband dielectric spectroscopy

  • B. Pascual-Jose|||0000-0001-7562-916X
  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • Ribes-Greus, A.|||0000-0003-2460-8291
  • De la Flor, S.
  • Serra, A.
[EN] To study the nature and the cooperativity of the disulfide exchange mechanism in covalent adaptable networks, the dielectric and conductive properties of three membranes obtained by curing diglycidyl ether of bisphenol A (DGEBA) with hexamethylenediamine (HMDA), cystamine (CYS), or a mixture of both diamines in the same proportion were studied. Significant differences in the dielectric relaxation spectra of the three membranes were observed. In the low-temperature region, the dielectric spectra displayed two non-cooperative dielectric relaxations (gamma and beta). In the DGEBA/HMDA-CYS membrane, its relaxation function and activation energy are between those corresponding to the DGEBA/HDMA and DGEBA/CYS membranes, but their relationship does not depend linearly on the composition. In the high-temperature region, a dielectric relaxation of cooperative origin related to the glass transition (alpha) was observed in the membrane cured with hexamethylenediamine. However, the relaxation related to the glass transition overlaps with the exchange of the disulfide bonds in the membranes with cystamine. The analysis of the electric conductivity (6) reveals an abrupt increment that suggests a radicalmediated dissociative bond exchange reaction may be occurring. However, the analysis of the 6DC curves is indicative of an associative bond exchange reaction. The rapid formation of new associations among radicals is proposed to explain the vitrimer-like behaviour on these CYS-containing membranes., This study forms part of the Advanced Materials programme and was supported by the Spanish Ministry of Science and Innovation with funding from European Union NextGeneration EU (PRTR-C17.11) and by Generalitat Valenciana (MFA/2022/041) . The authors also thank Universitat Politecnica de Valencia for the grant PAID-10-23 SUB.1. The authors of the Universitat Rovira i Virgili would like to thank the funding of the projects TED2021-131102B-C22 and PID2023-147128OB-C22 provided by MCNI/AEI/https://doi.org/10.13039/501100011033 and European Union "NextGenerationEU"/PRTR. They also thank to the Generalitat de Catalunya (2021-SGR-00154) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A novel methodology for map-based model fitting: A case study with a Dual Source Heat Pump experimental dataset

  • Marchante-Avellaneda, Javier|||0000-0001-5680-5033
  • Navarro-Peris, Emilio|||0000-0002-0608-2129
  • Barceló Ruescas, Francisco|||0000-0002-0577-2662
  • Song, Yang
[EN] This paper presents a new methodology to adjust map-based models to experimental data and reports the main results of a comprehensive experimental campaign of a Dual Source Heat Pump (DSHP) prototype. The prototype tested incorporates variable speed components (compressor, circulation pumps, and fan). The novelty of this prototype lies in its ability to select two possible heat sources: air or ground. Thus, it can operate as a geothermal or aerothermal heat pump, as well as a chiller, thanks to the additional capacity to reverse the cycle. Thanks to this hybrid approach, several advantages can be obtained compared to conventional equipment, such as higher efficiency, the requirement of smaller borehole heat exchangers, or the absence of defrost cycles. In a prior study, polynomial models were developed to accurately characterize the DSHP¿s performance (i.e., condenser and evaporator capacities and electrical energy consumption). These models were obtained considering the external variables to the unit as independent variables to facilitate their applicability using variables commonly measured in real installations. Due to the complexity of heat pump performance, which in current equipment can be influenced by up to 5 or 6 independent variables, the search for suitable polynomial models required the availability of a complete working map including more than 3000 working points. Thus, this previous work developed these models based only on simulation results. In this sense, this paper concludes the development of these models by focusing on two critical issues concerning empirical model development. The first aspect involves determining the minimum number and location of testing points needed to define the experimental sample for the model adjustment. The reported experimental data were obtained by analyzing the most suitable experimental design methodology to create the experimental matrices in each operating mode of the DSHP. The second aspect focuses on the final adjustment of models using experimental data. A novel fitting approach for empirical models is introduced in the last part of this study. The developed methodology enables the integration of simulation and experimental results for the final fitting of empirical models through a two-step adjustment. The first step involves analyzing and defining polynomial functionals from the complete working maps generated by simulation. Subsequently, in a second step, the polynomial models are refitted to a suitable experimental sample using the methodology presented in this work. The latter allows for the increase of the accuracy of the models and the minimization of experimental costs. This novel approach ensures a robust characterization of systems with many independent variables using a minimum amount of experimental data. Significant benefits can be obtained from its application, such as the reduction of experimental cost and an increase in the model¿s accuracy through an effective combination of both experimental and simulated information. Furthermore, it can be considered of general applicability to other engineering problems where the characterization of physical systems influenced by a high number of independent variables is required., The present work has been supported by the European Community Horizon 2020 Program for European Research and Technological Development (2014 2020) inside the framework of the project 656889 GEOTeCH (Geothermal Technology for Economic Cooling and Heating), by the project DESCARBONIZACIÓN DE EDIFICIOS E INDUSTRIAS CON SISTEMAS HÍBRIDOS DE BOMBA DE CALOR , funded by the Ministerio de Ciencia e Innovación , MCIN, Spain, with code number: PID2020-115665RB-I00 and by the postdoctoral fellowship funded by Universitat Politècnica de València inside the program Ayudas para Contratos de acceso de personal investigador doctor (PAID-10-23) . Many thanks as well to the late Dr. José Miguel Corberán, without whom this work would never have been possible. Sadly, Dr. José Miguel Corberán passed away in July of 2022. I wish to give my wholehearted support to José Miguel s family. I hope we did you proud.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental study about frost formation and growth in the evaporator of an air-to-water heat pump

  • Alarcón-Gallén, David|||0000-0003-3338-2888
  • Marchante-Avellaneda, Javier|||0000-0001-5680-5033
  • Hassan, Abdelrahman|||0000-0001-9063-9569
  • Navarro-Peris, Emilio|||0000-0002-0608-2129
[EN] Frost formation in the evaporator of air-to-water heat pumps (AWHPs) is one of the most crucial aspects that affect the efficiency of these systems. This paper analyzes the frost formation and growth in a finned-tube evaporator to monitor the degradation of a commercial heat pump's performance. The analysis includes the characterization of the various frost formation processes that may occur in real operating conditions, as well as a detailed examination of the water vapor sublimation process as a function of evaporation temperature and relative humidity. The results are presented in terms of the air-side pressure drop, evaporation temperature evolution, and the amount of condensed water recovered. From these results, key factors in the evolution of this process, like the frost structure, are critical in the system performance degradation, and parameters like air-side pressure drop are not enough to determine the optimum time for initiating the defrost process., This work has been funded by the project " Investigacion en la proxima generacion de bombas de calor aerotermicas para edificios integradas en los sistemas de calefaccion/refrigeracion y agua caliente sanitaria ", Ref. PID2023-148964OB-I00, by the Spanish Ministry of Science, Innovation and Universities. The authors are grateful for the support given.Marchante-Avellaneda J. would like to acknowledge the Universitat Politecnica de Valencia (UPV) for the grants for contracts for research personnel access (Ref. PAID-10-23) ; and initial research projects (Ref. PAID-06-24) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sub-milliwatt threshold power and tunable-bias all-optical nonlinear activation function using vanadium dioxide for wavelength-division multiplexing photonic neural networks

  • Parra Gomez, Jorge|||0000-0003-4610-3411
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
  • Navarro-Arenas, Juan
[EN] The increasing demand for efficient hardware in neural computation highlights the limitations of electronic-based systems in terms of speed, energy efficiency, and scalability. Wavelength-division multiplexing (WDM) photonic neural networks offer a high-bandwidth, low-latency alternative but require effective photonic activation functions. Here, we propose a power-efficient and tunable-bias all-optical nonlinear activation function using vanadium dioxide (VO2) for WDM photonic neural networks. We engineered a SiN/BTO waveguide with a VO2 patch to exploit the phase-change material¿s reversible insulator-to-metal transition (IMT) for nonlinear activation. We conducted numerical simulations to optimize the waveguide geometry and VO2 parameters, minimizing propagation and coupling losses while achieving a strong nonlinear response and low-threshold activation power. Our proposed device features a sub-milliwatt threshold power, a footprint of 5 ¿m, and an ELU-like activation function. Moreover, the bias of our device could be thermally tuned, improving the speed and power efficiency. On the other hand, performance evaluations using the CIFAR-10 dataset confirmed the device¿s potential for convolutional neural networks (CNN). Our results show that a hybrid VO2/SiN/BTO platform could play a prominent role in the path toward the development of high-performance photonic neural networks., This work is supported by the following funding: European Health and Digital Executive Agency (101070690 (PHOENIX)); Agencia Estatal de Investigación (PID2022-137787OB-I00); Generalitat Valenciana (PROMETEO Program(CIPROM/2022/14)); Ministerio de Universidades ( Margarita Salas (MS21-037)); Universitat Politècnica de València (Grants PAID-06-23, PAID-10-23).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Pd-Enhanced Carbon-Encapsulated Co Nanoparticles for Efficient Reverse Water Gas Shift under Magnetic Induction Heating

  • García-Zaragoza, Adrián
  • Río-Rodríguez, José Luis del
  • Cerezo-Navarrete, Christian
  • Molina, Maria Asuncion
  • Costley-Wood, Lucy
  • Mazarío-Santa-Pau, Jaime
  • Chaudret, Bruno
  • Martínez-Prieto, Luis Miguel
  • Beale, Andrew M
  • Gutiérrez-Tarriño, Silvia
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] Reducing CO2 to CO via the reverse water¿gas shift (RWGS) reaction is a promising strategy for carbon capture and utilization (CCU). In this study, tailored magnetic catalysts were designed through the pyrolysis of a Co-based MOF to form well-defined nanoparticles. As a result, carbon-encapsulated cobalt nanoparticles (Co@C) and palladium-doped cobalt nanoparticles (CoPd/Co@C) were synthesized and thoroughly characterized using a variety of techniques, including in situ X-ray absorption and diffraction experiments. These carbon-based catalysts were simultaneously used as heating agents and catalysts for the magnetically induced RWGS reaction, exhibiting remarkable activity and selectivity for syngas production. CO2 conversions of 61.1% and 71.1% were obtained for Co@C and CoPd/Co@C (63 mT, 2 kW, 320 kHz), respectively. Using magnetic induction heating (MIH), these catalysts operate at lower local temperatures and with greater energy efficiency than conventional thermal heating, while achieving superior CO production efficiency. Notably, CoPd/Co@C achieved highly satisfactory CO production efficiency (478.5 mLCO/kW·h), demonstrating a significant improvement compared to the analogous process utilizing magnetically induced heating. Furthermore, CoPd/Co@C exhibited unwavering stability, maintaining its performance for more than 200 h without significant degradation or need for reactivation. This study highlights the potential of MIH for industrial applications in CO2 reduction, offering a more renewable and economically viable alternative to traditional methods., The authors thank the financial support from the European Union's Horizon 2020 research and innovation program under grant agreement No 101022507. Financial support by Severo Ochoa centre of excellence program (CEX2021-001230-S) is gratefully acknowledged. In addition, this work has received funding from the Spanish Government (PID2022-140111OB-I00, PID2021-126080OA-I00, TED2021-130191B-C41, TED2021-132087A-I00 and CNS2023-145078 funded by MCIN/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR), Generalitat Valenciana (CIPROM/2022/10), and Junta de Andalucia (ProyExcel_00706). This study forms part of the Advanced Materials program and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047). J.L.R.-R. thanks to the MCIU for his FPU PhD contract FPU21/02562. S.G.T. thanks the Unversitat Politecnica de Valencia for her postdoctoral contract PAID-10-23. J.M. acknowledges his MSCA individual postdoctoral fellowship from the Horizon Europe research and innovation program (Project 101109254-BIOCATMAG) for funding. The authors thank Instituto de Tecnologia Quimica (ITQ), Consejo Superior de Investigaciones Cientificas (CSIC) and Universitat Politecnica de Valencia (UPV) for the facilities. We also thank the UPV Electron Microscopy Service for the TEM analysis and Magnetic Measurements Service of LPCNO. The authors would also like to thank ALBA synchrotron for provision of beamtime 2023097780 on NOTOS beamline, and beamline scientist Eduardo Villalobos. Also, Diamond Light Source for measurements via Block Allocation Group Access on B18 during beamtime SP34632-4. The UK Catalysis Hub is kindly thanked for resources and support provided during these B18 measurements, via UCL's membership of the UK Catalysis Hub Consortium funded by EPSRC grant EP/R026939/1.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis de maestría (MasterThesis)

 Incorporación de subproductos de hortalizas en polvo a harina de arroz: efecto sobre las propiedades funcionales y tecnológicas de mezclas, masas y bizcochos,  Incorporation of Vegetable By-products in Powder Form into Rice Flour: Effect on the Functional and Technological Properties of Blends, Doughs, and Sponge Cakes, Incorporació de subproductes d&apos, hortalisses en pols a farina d&apos, arròs: efecte sobre les propietats funcionals i tecnològiques de mescles, masses i bescuits

  • Muñoz Ibañez, Marta
[ES] La industria de hortalizas de IV gama y congelados genera grandes cantidades de residuos, especialmente de brócoli y zanahoria. Su revalorización como ingredientes en polvo en formulaciones sin gluten contribuye a la economía circular, en un contexto donde la harina de arroz, aunque tecnológicamente adecuada, es nutricionalmente limitada. En este trabajo, polvos de residuos de zanahoria y brócoli, obtenidos mediante secado con aire caliente a 70 ºC, se incorporaron a la harina de arroz en diferentes proporciones (5-30%) y se evaluó su impacto sobre las propiedades fisicoquímicas y antioxidantes, el color y la textura de mezclas, masas y bizcochos, así como sobre la capacidad de gelatinización del almidón y las propiedades reológicas de las masas. La sustitución redujo la humedad y la actividad del agua en las mezclas, pero incrementó el contenido en compuestos antioxidantes, especialmente con brócoli, manteniéndose tras una semana de almacenamiento. En términos de color, disminuyó la luminosidad (L*) y aumentaron los valores de cromaticidad rojo-verde (a*) y amarillo-azul (b*), debido a los carotenoides y las clorofilas de las hortalizas. A nivel tecnológico, la zanahoria limitó la gelatinización del almidón por sus pectinas solubles, mientras que el brócoli, debido a su fibra insoluble, mantuvo valores similares a la harina de arroz, mejorando también la firmeza y cohesividad, frente a la mayor elasticidad aportada por la zanahoria., [EN] The fresh-cut and frozen vegetable industry generates large amounts of waste, especially from broccoli and carrots. Their reuse as powdered ingredients in gluten-free formulations contributes to the circular economy, in a context where rice flour, although technologically suitable, is nutritionally limited. In this study, carrot and broccoli waste powders, obtained by hot air drying at 70 °C, were incorporated into rice flour in different proportions (5-30%) and their impact on the physicochemical and antioxidant properties, colour and texture of mixtures, doughs and cakes was evaluated, as well as on the gelatinisation capacity of the starch and the rheological properties of the doughs. The substitution reduced moisture and water activity in mixtures but increased the antioxidant compound content, especially with broccoli, which was maintained after one week of storage. In terms of colour, brightness (L*) decreased and red-green (a*) and yellow-blue (b*) chromaticity values increased due to the carotenoids and chlorophylls in the vegetables. Technologically, carrots limited starch gelatinisation due to their soluble pectins, while broccoli, due to its insoluble fibre, maintained values similar to rice flour, also improving firmness and cohesiveness, compared to the greater elasticity provided by carrots.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Decoupling Formulation and Processing Effects in Thermoplastic Starch Through a Data-Driven Structure-Property Framework

  • Pavón-Vargas, Cristina Paola|||0000-0003-2902-0059
  • Llidó Barragán, Alexandra|||0009-0006-4847-8048
  • López-Martínez, Juan|||0000-0001-6904-2282
  • Martínez-Romera, Nerea
[EN] Thermoplastic starch (TPS) is a melt-processable biopolymer whose properties depend strongly on formulation and processing. This work analyzes the combined influence of starch origin (corn, potato, rice), plasticizer system (glycerol, glycerol-triethyl citrate), and processing temperature (125 degrees C-135 degrees C) on the microstructure, mechanical, water-interaction, thermal and rheological behavior of extruded and injection-molded TPS. Potato TPS forms the strongest matrices (approximate to 2.0-3.4 MPa), corn TPS attains an intermediate strength level (approximate to 1.3-1.5 MPa), and rice TPS becomes highly ductile but less strong when plasticized with Gly-TEC (elongation approximate to 58%-82%, strength approximate to 0.5-0.8 MPa). Replacing glycerol with Gly-TEC increases ductility in all starches while shifting water uptake within a 32-59 wt.% window, decreasing it in corn and potato TPS and increasing it in rice TPS. All formulations exhibit pronounced shear-thinning, and Gly-TEC lowers melt viscosity and enhances processability. Principal component analysis and random forest modeling reveal a hierarchy among the governing parameters, decoupling formulation and processing contributions within a structure-property framework: starch origin defines the intrinsic property baseline, plasticizer composition controls the mechanical-hydrophilic response, and processing temperature fine-tunes ductility, while the model's accuracy (R 2 approximate to 0.94 for strength, 0.90 for elongation) confirms reliable TPS property prediction., This research was funded by MCIN/AEI/10.13039/501100011033 through grant PID2023-152869OB-C22 by the European Union "NextGenerationEU"/PRTR and Universitat Politecnica de Valencia (PAID-10-23, PAID-01-22). Funding for open access charge:CRUE-Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Proyecto fin de carrera (BachelorThesis)

Estudio de la fermentación y de diversos pretratamientos termofísicos para la mejora de las propiedades antioxidantes de productos en polvo obtenidos a partir de residuos de zanahoria de iv gama, Fermentation and thermophysical pretreatments for improving the antioxidant properties of powdered products obtained from iv range carrot wastes, Estudi de la fermentació i diversos pretractaments termofísics per a millorar les propietats antioxidants de productes en pols obtinguts a partir de residus de carlota de iv gama

  • Guillén Alonso, Javier
[ES] La obtención de ingredientes vegetales en polvo a partir de residuos de la industria alimentaria ha suscitado un interés creciente en los últimos años. Los procesos de conversión de estos residuos en productos en polvo permiten la valorización integral de sus componentes, posibilitando su reintroducción en la cadena alimentaria como ingredientes funcionales. De este modo, se obtienen productos estables, versátiles y ricos en nutrientes, al tiempo que se da valor a un producto de desecho que supone un problema medioambiental y de gestión para la industria. Además de favorecer la circularidad de los sistemas alimentarios, este enfoque contribuye al desarrollo de dietas más nutritivas y sostenibles. El proceso de obtención de productos en polvo se basa en tres operaciones unitarias sencillas tales como la desestructuración o triturado, la deshidratación y la molienda final hasta obtener un polvo fino. Sin embargo, existen evidencias científicas de que la aplicación de determinados pretratamientos sobre el material vegetal podría mejorar las características de los productos en polvo obtenidos a partir de este tipo de residuos, debido a los cambios estructurales promovidos. De este modo, el objetivo general del presente trabajo consiste en incorporar diferentes pretratamientos termofísicos y biológicos al proceso de obtención de ingredientes en polvo a partir de residuos de zanahoria. Concretamente, se propuso estudiar el efecto de distintos pretratamientos biológicos como la fermentación (FERM) o pretratamientos termofísicos como la aplicación de microondas (MW), ultrasonidos (US) o autoclavado (AUTO), sobre las distintas propiedades fisicoquímicas y antioxidantes del residuo de zanahoria generado en una línea de producción de palitos de IV gama, para después poder obtener el polvo de residuo de zanahoria pretratado mediante secado por aire caliente. El trabajo consistió en una primera parte en estudiar el efecto de las variables del pretratamiento con US (tiempo y masa de residuo), MW (potencia y tiempo) y FERM (microorganismo y tiempo) sobre las propiedades fisicoquímicas y antioxidantes del residuo pretratado. El estudio de la fermentación incluyó la evaluación del residuo de zanahoria como sustrato para el crecimiento de distintos microorganismos del género Lactobacillus considerados probióticos mediante el recuento de viables y los cambios de pH a distintos tiempos de fermentación. Una vez seleccionadas los niveles de las variables, se procedió a la obtención del polvo mediante triturado del residuo, aplicación de los pretratamientos seleccionados, secado por aire caliente a 60 ºC durante 10 h y molienda final. Los polvos obtenidos se evaluaron en cuanto a sus propiedades fisicoquímicas y antioxidantes. Los resultados obtenidos pusieron de manifiesto que la combinación de los pretratamientos ensayados con los procedimientos de secado y molienda determinan las propiedades del polvo. El estudio inicial de los pretratamientos sobre el residuo de zanahoria triturado permitió la selección de las variables más adecuadas que fueron: en cuanto a la FERM, se seleccionó el microorganismo Lactobacillus salivarius spp. salivarius durante 24 h; con respecto a la aplicación de US, se seleccionaron 15 min de tratamiento a 40 kHz sobre 100 g de muestra; con respecto al uso de MW, se seleccionó una potencia de 3 W/g durante 4 min; por su parte, el autoclavado consistió en la aplicación de 120 ºC durante 5 min. Los resultados obtenidos mostraron cierta mejora en las propiedades antioxidantes y fisicoquímicas de los polvos pretratados mediante fermentación y ultrasonidos, mientras que se evidenció degradación de éstas en el caso de microondas y autoclave. En términos generales, se concluye que los polvos pretratados obtenidos a partir de residuo de zanahoria son una alternativa interesante para la reincorporación de estos desechos en la cadena alimentaria, así como para la mejora nutricional que suponen los pretratamientos y el secado por a, [EN] Obtaining powdered vegetable ingredients from food industry waste has garnered increasing interest in recent years. The processes of converting this waste into powdered products allow for the comprehensive valorization of is components, enabling heir reintroduction into the food chain as functional ingredients. This results in stable, versatile, and nutrient-rich products while adding value to a waste producto that poses environmental and management challenges for the industry. In addition to promoting the circularity of food systems, this approach contributes to the development of more nutritious and sustainable diets. The process of obtaining powdered products is based on three simple unit operations: deconstruction or grinding, dehydration, and final milling to obtain a fine powder. However, there is scientific evidence that the application of certain pretreatments on plan material could improve the characteristics of the powdered products obtained from this type of waste, due to the structural changes promoted. Therefore, the general objective of this work is to incorporate different thermophysical and biological pretreatments into the process of obtaining powdered ingredients from carrot waste. Thus, this study aimed to investigate the effect of various biological pretreatment such as fermentation (FERM) or thermophysical pretreatments such as the application of microwaves (MW), ultrasound (US), or autoclaving (AUTO) on the different physicochemical and antioxidant properties of carrot waste generated in a production line of IV range carrot sticks, to later obtain pretreated carrot waste through hot air drying. The work consisted of an initial study of the effect of the pretreatment variables with US (time and mass of residue), MW (power and time), and FERM (microorganism) on the physicochemical and antioxidant properties of the pretreated residue. The fermentation study included the evaluation of carrot waste as a substrate for the growth of different microorganisms of the genus Lactobacillus considered probiotics, by counting viable cells and changes in pH at different fermentation times. Once the variable levels were selected, the powder was obtained by grinding the residue, applying the selected pretreatment, drying with hot air at 60 ºC for 10 hours, and final milling. The obtained powders were evaluated for their physicochemical and antioxidant properties. The results showed that the combination of the tested pretreatments with the drying and milling procedures determines the powder s properties. The initial study of the pretreatments on the shredded carrot waste allowed for the selection of the most suitable variables, which were: for FERM, the microorganism Lactobacillus salivarius spp. salivarius was selected for 24 hours; regarding the application of US, 15 minutes of treatment on 100 g of sample were selected; regarding the use of MW, a power of 3 W/g for 4 minutes was selected; autoclaving consisted of applying 120 ºC for 5 minutes. The results showed some improvement in the antioxidant and physicochemical properties of the powders pretreated by fermentation and ultrasound, while degradation of these properties was observed in the case of microwaves and autoclave. In general terms, it is concluded that the pretreated powders obtained from carrot waste are an interesting alternative for the reintegration of this waste into the food chain, as well as for the nutritional improvement provided by the pretreatments and hot air drying, granting them interesting applications in food preparation and potentially incorporating them into different food matrices.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Soft fault detection strategies in heat pumps: A case study investigating virtual sensor methodologies for evaporator fouling

  • Llopis-Mengual, Belén|||0000-0003-0238-4231
  • Marchante-Avellaneda, Javier|||0000-0001-5680-5033
  • Navarro-Peris, Emilio|||0000-0002-0608-2129
[EN] Heat pumps, known for their energy efficiency, can experience soft faults, such as evaporator fouling, that degrade performance while allowing continued operation, making detection challenging. This study presents a method for detecting evaporator fouling in air-to-water heat pumps using virtual sensors. These sensors estimate key parameters, including condensing and evaporating temperatures, refrigerant mass flow rate, and air enthalpy at the evaporator outlet. The approach relies only on variables typically measured in the system ¿ such as those from the compressor, fan control, and secondary fluids (air and water) ¿ eliminating the need for direct refrigerant measurements. Virtual sensors are calibrated against simulated fault-free performance maps and tested on a heat pump with variable-speed components. The method¿s effectiveness is assessed through simulations and experiments with induced evaporator fouling. Simulations show high accuracy, with deviations within ±5%; however, experimental results exhibit higher deviations due to challenges in measuring air dry-bulb temperature at the evaporator outlet, where fouling leads to non-uniform airflow. Despite these limitations, virtual sensors offer a cost-effective and practical alternative to traditional physical sensors for fault detection., Belén Llopis-Mengual acknowledges the Spanish Ministry of Universities through the Formación de Profesorado Universitario programme ref. FPU 19/04012. Javier Marchante-Avellaneda acknowledges the Technical University of Valencia through the postdoctoral fellowship Ayudas para Contratos de acceso de personal investigador doctor ref. PAID-10-23. Funding for open access charge: Universitat Politècnica de València, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrochemically generated metal-doped 2D-cobalt(M)MOFs@C derivatives for boosting the electrocatalytic oxidation of glycerol to formate

  • Hernandez-Salvador, Sergio
  • Montiel, Miguel A.
  • Molina, M. Asuncion
  • Calvente, Juan Jose
  • Beale, Andrew M.
  • Solla-Gullon, Jose
  • Olloqui-Sariego, Jose Luis
  • Río-Rodríguez, José Luis del
  • Gutiérrez-Tarriño, Silvia
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] Glycerol is an underutilized waste product that is abundantly available from the biodiesel industry. Electrocatalytic oxidation of glycerol (GOR) to formate offers an environmentally friendly and cost-effective approach to valorizing glycerol. In this study, we have developed new types of metal-doped cobalt metal-organic frameworks, which are grown directly on a carbon matrix via a one-pot synthesis as electrocatalyst precursors. In-depth structural analysis has revealed that, in the Ni-doped cobalt MOF, Ni substitutes a fraction of Co sites isomorphically, forming isolated Ni(II) centers, while Cu is present as a mixture of Cu(II) and metallic Cu, with the majority in the oxidized form as highly dispersed species and a small fraction forming nanoparticles. These materials were then subjected to a controlled potential-induced surface reconstruction to produce mixed-metal oxide/oxyhydroxide-like environments interconnected through M-O-M motifs, the extent of the reconstruction depending strongly on the dopant metal. The metal-doped derivatives were tested as electrocatalysts for the alkaline electrooxidation of glycerol using in-house designed electrochemical reactors with different cell configurations and operating modes. We demonstrated that metal-doped derivative phases exhibit improved electrocatalytic activity for GOR compared to the monometallic counterpart. These catalysts yield significant glycerol conversion rates under single-pass operation, with improved Faradaic efficiencies towards formate (up to 70%) and low energy consumption (< 320 kWh kmol(- 1)), while suppressing the complete oxidation of glycerol to carbonate or CO2. This work provides new insight into the rational design of metal-doped MOF derivatives as highly active and selective electrocatalysts for the practical glycerol valorization., The authors thank the financial support from the Spanish Govern-ment (PID2021-126799NB-I00, PID2022-140111OB-I00, PID2022-13 8491OB-C32, TED2021-130191B-C41, TED2021-130191B-C42 and RED2022-134120-T funded by MCIU/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR) . This study forms part of the Advanced Materials program and was supported by MCIN with partial funding from the European Union Next Generation EU (PRTR-C17. I1) , by Generalitat Valenciana (MFA/2022/047, CIPROM/2022/10) . In addition, this work has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 101022507. This work was also funded by "Ayuda a Primeros Proyectos de Investigacion (PAID-06-24) . J.L.R.-R. thanks the MCIU for his FPU PhD contract FPU21/02562. S.G.T. thanks the Uni-versitat Politecnica de Valencia for her postdoctoral contract PAID-10-23. M.A.M. acknowledges funding from the EPSRC InFUSE Prosperity Partnership (EP/V038044/1) . The authors acknowledge ALBA Syn-chrotron for access to the NOTOS beamline under Proposal 2023097780 and Diamond Light Source for access to Beamline B18 under Proposal SP45829-1. The authors also thank Eduardo Villalobos, Carlo Marini and the B18 beamline staff for their assistance during the XAS mea-surements. The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization. Financial support by Severo Ochoa Centre of Excellence program (CEX2021-001230-S) is gratefully acknowledged. Authors are also grateful to Ana Cristina Martinez Cantos (Institute of Electrochemistry, University of Alicante) for her work in the identification and determination of products in the glycerol electro-oxidation process.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Local Tuning of the Epsilon-Near-Zero Condition in Hybrid Silicon Waveguides Using Reactive Laser Annealing

  • Navarro-Arenas, Juan
  • Howe, Thomas M.
  • Koutsogeorgis, Demosthenes C.
  • Hillier, James A.
  • Kalfagiannis, Nikolaos
  • Parra Gomez, Jorge|||0000-0003-4610-3411
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
[EN] The ability for locally tuning devices in photonic integrated circuits could be an essential function for a wide range of applications requiring reconfigurable photonics. This work demonstrates the application of postgrowth reactive laser annealing to selectively tune the optical properties of tin-doped indium oxide (ITO) patches integrated in silicon waveguides. ITO stands out due to its distinctive ability to operate in the epsilon-near-zero (ENZ) regime at near-infrared wavelengths. The precise local tuning of the ENZ wavelength in ITO/Si hybrid waveguides by controlling the laser annealing fluence is demonstrated. This technique uniquely allows for the customization of optical constants at critical telecom wavelengths. The findings present a powerful and adaptable method to exploit the exceptional qualities of ITO and, by extension, other transparent conducting oxides, paving the way for the functional diversification of hybrid photonic devices on a singular-silicon chip., P.S. acknowledges funding from Agencia Estatal de Investigación (PID2022-137787OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe ) and Generalitat Valenciana (PROMETEO Program (CIPROM/2022/14), Advanced Materials programme supported by MCIN with funding from European Union NextGenerationEU, and by Generalitat Valenciana (PRTR-C17.I1). J.N-A. acknowledges funding from University of Valencia/Ministry of Universities (Government of Spain), modality Margarita Salas , funded by the European Union, Next-Generation EU (MS21-037). T.M.H. acknowledges partial funding support from the Department of Physics & Mathematics at Nottingham Trent University through the final year project competition scheme. J.P. acknowledges funding from Universitat Politècncia de València (PAID-10-23).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Green One-Pot Synthesis of Benzimidazoles from Dinitroarenes in Water Using a Ru-Doped Co-Based Heterogeneous Catalyst

  • del Río-Rodríguez, Jose Luis
  • Molina, Maria Asunción
  • Costley-Wood, Lucy
  • Falcini, Chiara
  • Beale, Andrew M.
  • Gutiérrez-Tarriño, Silvia
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] A novel methodology is presented for preparing non-noble metal-based heterogeneous catalysts doped with low amounts of noble metals, yielding highly active and reusable materials for sustainable organic transformations. A new Co-Ru@C catalyst was developed by incorporating small ruthenium nanoparticles (1 wt %) and cobalt nanoparticles (10 wt %) on Vulcan carbon via pyrolysis of a ruthenium-doped cobalt metal-organic framework supported on carbon (2D-Co(Ru)MOF/C). Advanced characterization (in situ PXRD and XAS, HAADF-STEM, HRTEM) confirmed strong Co-Ru interactions, enhancing catalytic activity. The catalyst was evaluated in the one-pot reductive amination of dinitrobenzenes to benzimidazoles using molecular hydrogen and water, which is in line with green chemistry. The synergistic effect between Co and Ru enabled quantitative product yields under significantly milder reaction conditions than the existing ones. In addition, ruthenium was found to facilitate hydrogen activation in the bimetallic material compared with its undoped Co@C counterpart. Regarding stability, the Co-Ru@C catalyst retained its activity over at least five consecutive cycles without metal leaching or structural degradation. This material demonstrated a broad substrate scope, affording over 20 functionalized benzimidazoles in high yields. Half-gram-scale syntheses of commercial Diabazole and Fuberidazole further validated the scalability of this approach., Financial support from the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged. The authors thank the financial support provided by the grants (PID2022140111OB-I00, TED2021-130191B-C41 funded by MCIN/AEI/10.13039/501100011033 and ERDF A way for making Europe and European Union NextGenerationEU/PRTR). This project has also received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No. 101022507 and NextGenerationEU/PRTR. This study forms part of the Advanced Materials program and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17.I1) and by Generalitat Valenciana (MFA/2022/047). This work was also funded by "Ayuda a Primeros Proyectos de Investigacion (PAID-06-24)", Vicerectorate of Research of the Universitat Politecnica de Valencia (UPV). S.G.T. thanks the Universitat Politecnica de Valencia for her postdoctoral contract PAID-10-23. J.L.R.-R. thanks the MCIU for his FPU PhD contract FPU21/02562. XAS and XRD experiments were performed at NOTOS beamline at ALBA Synchrotron (proposal number 2023097780) with the collaboration of ALBA staff (Eduardo Villalobos and Carlo Marini). The authors thank Diamond Light Source, particularly B18 beamline team and D. Gianolio for their support during XAS measurement (proposal SP42561-1). The electron microscopy service of the UPV is acknowledged for their help in sample characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nonvolatile reconfigurable polarization rotator at datacom wavelengths based on a Sb2Se3/Si waveguide

  • Parra Gomez, Jorge|||0000-0003-4610-3411
  • Kovylina-Zabyako, Miroslavna
  • Griol Barres, Amadeu
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
[EN] Silicon photonics has become a key platform for photonic integrated circuits (PICs) due to its high refractive index and compatibility with complementary metal-oxide-semiconductor manufacturing. However, the inherent birefringence in silicon waveguides requires efficient polarization management. Here, we report a reconfigurable polarization rotator (PR) using a Sb2Se3/Si waveguide operating at datacom wavelengths (1310 nm), providing nonvolatile switching with zero static power consumption. The polarization conversion relies on the interference of hybrid electric-magnetic (EH) modes, which can be reconfigured by changing the Sb2Se3 state between amorphous and crystalline. Our experimental device exhibits a polarization conversion efficiency (PCE) and a polarization extinction ratio (PER) as high as -0.08 dB and 17.65 dB, respectively, in a compact footprint of just 21 µm length. Therefore, the proposed reconfigurable PR offers a compact and energy-efficient solution for polarization management in silicon photonics, with potential applications in data communication networks and emerging applications benefiting from polarization information encodings, such as optical neural networks and quantum computing., Funding. AgenciaEstatal de Investigacion (PID2022-137787OB-I00, TED2021-132211B-I00) ;GeneralitatValenciana (PROMETEO Program (CIPROM/2022/14)); Universitat Politecnica de Valencia (PAID-06-23, PAID-10-23).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Selective design of MOF-derived electrocatalytic interphases by potential-driven surface reconstruction

  • Hernández-Salvador, S
  • Márquez, Inmaculada
  • Calvente, Juan José
  • Río-Rodríguez, José Luis del
  • Andreu, Rafael
  • Olloqui Sariego, José Luis
  • Gutiérrez-Tarriño, Silvia
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] Metal-organic frameworks (MOFs) can be used as precursors for the directed synthesis of derived materials with enhanced performance for electrocatalysis. Herein, we report on an in-situ electrochemical strategy for the selective synthesis of hybrid electrocatalysts using a cobalt MOF (2D-CoMOF) as a precursor for constructing electrochemical sensors to monitor the glucose oxidation reaction (GOR). By using in-situ Raman spectroelectrochemistry, it is demonstrated that a precise control of the applied potential during amperometric treatment of 2D-CoMOF can promote the generation of derived heterostructures in which the original MOF coexists with metal oxides and/or oxyhydroxides (MOF-MOx) with different compositions. The so-prepared electrodes exhibit high electroactive surface areas, a high number of electrocatalytically active cobalt sites and an efficient charge transport across the catalytic film. Moreover, their composition-dependent electrocatalytic performance for the glucose oxidation reaction is examined, establishing a relationship between the applied potential, the macroscopic chemical composition of the heterostructure and the electrocatalytic performance for glucose sensing. In particular, the hybrid phases consisting of Co-MOF/Co3O4/CoOOH display superior electrocatalytic sensing performance with a wide linear concentration range and high sensitivity. The present work emphasizes the significance that the precise control of the applied potential has on the electrochemically-assisted MOF transformation for developing highly efficient MOF-derived electrocatalysts., Authors thank the financial support by the grants PID2021-126799NB-I00 and PID2022-140111OB-I00 funded by MICIU/AEI/ 10.13039/501100011033 and by ERDF/EU, TED2021-130191B-C41, TED2021-130191B-C42 and RED2022-134120-T funded by MICIU/AEI/ 10.13039/501100011033 and ERDF A way for making Europe, and European Union Next Generation EU/PRTR. Authors acknowledge funding from Junta de Andalucía (P20 01027 and PYC 20 RE 060 UAL. Financial support by Severo Ochoa centre of excellence program (CEX2021-001230-S) is gratefully acknowledged. This study forms part of the Advanced Materials program and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047). S.G.T. thanks the Universitat Politecnica de Valencia for her postdoctoral contract PAID10-23. J.L.R.-R. thanks the MCIU for his FPU PhD contract FPU21/02562.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Proyecto fin de carrera (BachelorThesis)

Análisis de las propiedades antioxidantes y antimicrobianas de productos en polvo obtenidos a partir de residuos de confección de hortalizas en cooperativa, Antioxidant and antimicrobial properties of powdered products obtained from vegetable wastes, Anàlisi de les propietats antioxidants i antimicrobianes de productes en pols obtinguts a partir de residus de confecció d&apos, hortalisses en cooperativa

  • Labrador Miguel, Patricia
[ES] El desperdicio alimentario es un problema a nivel mundial para el que se busca solución mediante la valorización de los residuos generados. En concreto, durante el procesado de frutas y hortalizas se pierden pieles, semillas, hojas externas, bagazos o partes dañadas en formas de residuos. Todos ellos cuentan con grandes cantidades de compuestos antioxidantes y bioactivos, con propiedades nutricionales a tener en cuenta para ser valorizados. La obtención de productos en polvo a partir de estos residuos es una alternativa interesante para evitar este desperdicio de nutrientes, ya que permite una valorización integral de los mismos. Los productos en polvo obtenidos a partir de frutas u hortalizas son concentrados, estables y versátiles, de modo que mantienen o incluso mejoran las propiedades el contenido en componentes antioxidantes y bioactivos del material de partida, pudiendo llegar a superarlo gracias al procesado. En este trabajo se obtuvieron productos en polvo a partir de diferentes hortalizas provenientes de las líneas de confección de bandejas y IV gama en cooperativa: apio, brócoli, col repollo, ajo puerro y zanahoria. Los productos se obtuvieron mediante y proceso de triturado, secado por aire caliente (SAC) o liofilización (LIO, y molienda con el fin de obtener un polvo fino. Los ingredientes en polvo obtenidos se analizaron en cuanto a sus propiedades fisicoquímicas (actividad del agua, humedad, contenido en sólidos solubles y tamaño de partícula) y antioxidantes (contenido en fenoles y flavonoides totales y actividad antioxidante por los métodos de los radicales libres ABTS y DPPH); adicionalmente se realizó la identificación de compuestos fenólicos específicos mediante cromatografía líquida de alta resolución (HPLC) y se estudió su potencial antimicrobiano mediante ensayos de inhibición en placa y determinación de la concentración mínima inhibitoria (CMI) frente a distintos microorganismos (Listeria innocua, S. aureus, Salmonella y E. coli). Los resultados del presente trabajo demostraron que fue posible obtener productos en polvo con una actividad del agua que asegura su estabilidad, y demostraron que el método de deshidratación empleado influye en las características fisicoquímicas y antioxidantes, siendo los polvos LIO más finos que los SAC por ser más fácil de moler gracias a la estructura porosa formada al sublimar el el hielo, y presentando los SAC un mayor contenido en fenoles y flavonoides totales, así como una actividad antioxidante superior, por norma general. Además, se confirmó que estos productos en polvo tienen cierta capacidad antimicrobiana en los ensayos de inhibición en placa, a pesar de que los resultados obtenidos en el ensayo de concentración mínima inhibitoria no fue el esperado. Una vez finalizado este trabajo, se puede concluir que la valorización integral de residuos de frutas y hortaliza mediante la producción de productos en polvo es una alternativa de gran interés. Esto se debe a la gran versatilidad que ofrecen los productos en polvo, así como las mejoras en propiedades antioxidantes y nutricionales que estos pueden aportar a las formulaciones a las que se añadan. Además, si se confirma el potencial antimicrobiano que tienen podrían llegar a utilizarse como conservantes naturales., [EN] Food waste is a worldwide problem for which a solution is being sought through the valorization of the waste generated. Specifically, during the processing of fruits and vegetables, skins, seeds, outer leaves, bagasse or damaged parts are lost in the form of waste. All of them contain large amounts of antioxidant and bioactive compounds, with nutritional properties to be considered for valorization. Obtaining powdered products from these residues is an interesting alternative to avoid this waste of nutrients, since it allows an integral valorization of them. Powdered products obtained from fruits or vegetables are concentrated, stable and versatile, so that they maintain or even improve the properties of the antioxidant and bioactive components content of the starting material and can even surpass it thanks to processing. In this work, powdered products were obtained from different vegetables from the tray packing and pre-prepared convenience food lines in the cooperative: celery, broccoli, cabbage, leek and carrot. The products were obtained by grinding, hot air drying (SAC) or freeze drying (LIO) and milling in order to obtain a fine powder. The powdered ingredients obtained were analyzed for their physicochemical properties (water activity, moisture, soluble solids content and particle size) and antioxidant properties (total phenol and flavonoid content and antioxidant activity by ABTS and DPPH free radical methods); in addition, specific phenolic compounds were identified by highperformance liquid chromatography (HPLC) and their antimicrobial potential was studied by plate inhibition assays and determination of the minimum inhibitory concentration (MIC) against different microorganisms (Listeria innocua, S. aureus, Salmonella and E. coli). The results of the present work showed that it was possible to obtain powdered products with a water activity that ensures their stability, and demonstrated that the dehydration method used influences the physicochemical and antioxidant characteristics, with LIO powders being finer than SAC powders because they are easier to grind thanks to the porous structure formed by the sublimation of ice, and SAC powders having a higher content of total phenols and flavonoids, as well as a higher antioxidant activity, as a general rule. In addition, it was confirmed that these powdered products have some antimicrobial capacity in the plate inhibition assays, although the results obtained in the minimum inhibitory concentration assay were not as expected. Once this work has been completed, it can be concluded that the integral valorization of fruit and vegetable wastes through the production of powdered products is an alternative of great interest. This is due to the great versatility offered by powdered products, as well as the improvements in antioxidant and nutritional properties that they can provide to the formulations to which they are added. In addition, if their antimicrobial potential is confirmed, they could be used as natural preservatives
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The Second Life of Cobalt MOF: Alternating Magnetic Field- Assisted Electrocatalytic Oxygen Evolution Reaction in MOF-derived Nanoparticles

  • del Río-Rodríguez, Jose Luis
  • Márquez, Inmaculada
  • Gallo-Cordova, Álvaro
  • Molina, M. Asunción
  • Martínez, Jordan Santiago
  • Calvente, Juan José
  • Beale, Andrew M.
  • Morales, Maria del Puerto
  • Olloqui Sariego, José Luis
  • Gutiérrez-Tarriño, Silvia
  • Cerezo-Navarrete, Christian
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] A major challenge in hydrogen production from water electrolysis is the slow kinetics of oxygen evolution (OER). Applying an alternating magnetic field (AMF) to ferromagnetic metal nanoparticles on electrodes has gained attention due to the generation of a thermally activated electrocatalyst, which can boost OER performance. This work studies the influence of external parameters and intrinsic characteristics of carbon-encapsulated cobalt MOF-derived nanoparticles deposited onto graphite paper electrodes on the electrocatalytic AMF-OER coupled process. Specifically, the impact of AMF strength, the electrolyte composition (concentration and cation nature) and cobalt content on the electrocatalytic AMF-OER performance are thoroughly investigated. Results reveal that AMF significantly boosts OER activity of Co@C-based electrodes, their enhancement being strongly dependent on the electrolyte composition. Furthermore, both the heating capacity of the herein synthesized catalyst for magnetic hyperthermia and their structural features remain intact after an intense and prolonged electrocatalytic AMF-OER experiment. No signs of sintering, leaching, or particle size increase, which are typical issues observed when metal nanoparticles are subjected to an intense external magnetic field, have been found. This underscores the high operational stability of this catalyst. These findings provide new insights into thermal AMF-assisted alkaline water oxidation for developing high-performance catalysts for enhanced electrocatalysis., Financial support by Severo Ochoa Centre of Excellence program (CEX2021-001230-S) is gratefully acknowledged. The authors thank the financial support from the Spanish Government (PID2021-126799NB-I00, PID2022-140111OB-I00, TED2021-130191B-C41, TED2021-130191B-C42, TED2021-130191B-C43 and RED2022-134120-T funded by MCIU/AEI/ 10.13039/501100011033 and European Union NextGenerationEU/PRTR). This study forms part of the Advanced Materials program and was supported by MCIN with partial funding from the European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047) and Generalitat Valenciana (CIPROM/2022/10). In addition, this work has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 101022507. This work was also funded by "Ayuda a Primeros Proyectos de Investigacion (PAID-06-24)." J.L.R.-R. thanks the MCIU for his FPU PhD contract FPU21/02562. SGT thanks the Universitat Politecnica de Valencia for her postdoctoral contract PAID-10-23. The authors thank Diamond Light Source, particularly the B18 beamline team and D. Gianolio, for their support during the XAS measurements (proposal SP40577-1). M.A.M. acknowledges Laurelin project (European Union's Horizon 2020 - Reference: 101022507) for PDRA contract at UCL.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multifunctional Heterogeneous Cobalt Catalyst for the One-Pot Synthesis of Benzimidazoles by Reductive Coupling of Dinitroarenes with Aldehydes in Water

  • Río-Rodríguez, José Luis del
  • Chinchilla, Lidia E.
  • Holgado, J.P.
  • Villar-García, Ignacio
  • Pérez Dieste, Virginia
  • Calvino, José Juan
  • Gutiérrez-Tarriño, Silvia
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] The endeavor of sustainable chemistry has led to significant advancements in green methodologies aimed at minimizing environmental impact while maximizing efficiency. Herein, a straightforward synthesis of benzimidazoles by reductive coupling of o-dinitroarenes with aldehydes is reported for the first time in aqueous media while using a non-noble metal catalyst. This work demonstrates that the combination of nitrogen and phosphorous ligands in the synthesis of supported heteroatomincorporated Co nanoparticles is crucial for obtaining the desired benzimidazoles. The process achieves >99% conversion, >99% chemoselectivity and stability for the reduction of dinitroarenes using water as the solvent and hydrogen as the reductant under mild reaction conditions. The robustness of the catalyst has been investigated using several advanced techniques such as HRTEM, HAADF-STEM, XEDS, EELS, and NAP-XPS. In fact, we have shown that the introduction of N and P dopants prevents metal leaching and the sintering of the cobalt nanoparticles. Finally, to explore the general catalytic performance, a wide range of substituted dinitroarenes and benzaldehydes were evaluated, yielding benzimidazoles with competitive and scalable results, including MBIB (94% yield), which is a compound of pharmaceutical interest., Financial support by Severo Ochoa centre of excellence program (CEX2021-001230-S) is gratefully acknowledged. The authors thank the financial support from the Spanish Government (PID2022-140111OB-I00, PID2020-113006-RB-I00, TED2021-130191B-C41 and TED2021-130191B-C44, PID2020-119946RB-I00, funded by MCIN/AEI/ 10.13039/501100011033 and European Union NextGenerationEU/PRTR). This study forms part of the Advanced Materials programme and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047). In addition, this work has received funding from the European Union s Horizon 2020 research and innovation program under grant agreement No 101022507. J.L.R.-R. thanks the MCIU for his FPU PhD contract FPU21/02562. SGT thanks the Universitat Politècnica de València for her postdoctoral contract PAID-10-23. IJVG would like to acknowledge OSMIBatt - CNS2022-135285 for funding. HR-STEM studies were performed at the DME-UCA node of the ELECMI Spanish Unique Infrastructure (ICTS) for Electron Microscopy of Materials. Some of these experiments were performed at CIRCE (beamtime 2022096991) beamline at ALBA Synchrotron with the collaboration of ALBA staff.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Impact of Thermophysical and Biological Pretreatments on Antioxidant Properties and Phenolic Profile of Broccoli Stem Products

  • Bas-Bellver, Claudia Isabel
  • Barrera Puigdollers, Cristina|||0000-0003-4408-3541
  • Seguí Gil, Lucía|||0000-0002-2711-9445
[EN] Fruit and vegetable industrialisation is a major contributor to food waste; thus, its integral transformation into functional powders has gained attention. Pretreatments can be incorporated into valorisation processes to generate structural or biochemical changes that improve powders¿ characteristics. This study deepens into the impact of biological (fermentation, FERM) and thermophysical (autoclaving, AUTO; microwaves, MW; ultrasound, US; and pasteurisation, PAST) pretreatments, combined with dehydration (hot air-drying, HAD; or freeze-drying, FD) on the characteristics of powdered products obtained from broccoli stems. The impact of pretreatments on physicochemical (moisture, water activity, total soluble solids) and antioxidant properties (phenols, flavonoids, antioxidant capacity by ABTS and DPPH) on residue and powdered products was studied, together with their impact on plant tissue structure (Cryo-SEM) and the powders¿ phenolic profile (HPLC). Probiotic viability was also determined on the fermented samples. The pretreatments applied, particularly the ultrasound, improved the antioxidant properties of the broccoli stems compared to the unpretreated samples, in line with microscopic observations. Dehydration did also improve the antioxidant attributes of the broccoli wastes, especially drying at 60 °C. However, pretreatments combined with dehydration did not generally lead to an improvement in the antioxidant properties of the powders. Probiotic properties were preserved in the freeze-dried products (>107 CFU/g). In conclusion, pretreatments may be applied to enhance the antioxidant attributes of broccoli wastes, but not necessarily that of dried powdered products., This research was funded by Universitat Politècnica de València under the programme PAID-10-23 (Pretramientos termofísicos y biológicos para la mejora de la funcionalidad de productos en polvo obtenidos a partir de residuos de hortalizas, y valoración de su aplicación en el sector agroalimentario).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sustainable One-Pot Synthesis of N-Substituted Pyrroles Using a Multifunctional Cobalt-Based Catalyst

  • del Río-Rodríguez, Jose Luis
  • Tiscareño-Ferrer, Arisbeth
  • Gutiérrez-Tarriño, Silvia
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] The development of novel non-noble metal-based heterogeneous catalysts for organic compound synthesis has gained significant relevance in the last decades, aiming to maximize efficiency while minimizing environmental impact. A carbon-supported nitrogen phosphorus-cobalt catalyst (Co2PNx@NC) was found to be active for the one-pot synthesis of N-substituted pyrroles via the reductive coupling of nitrobenzene with 2,5-hexanedione. This work represents the first successful synthesis of this important group of molecules with >99% conversion and >99% chemoselectivity, using ethanol as a green solvent, non-noble metal-based catalyst, H-2 as the reductant, and mild reaction conditions simultaneously. The robustness of the catalyst has been investigated using several techniques, including HAADF-STEM, HRTEM, XEDS, and PXRD, revealing excellent stability after six successive runs. In the presence of this material, the hydrogenation of readily accessible nitroarenes followed by condensation yields more than 25 pyrroles in good to high yields. Beyond its advantageous step economy, the broad synthetic applicability of this methodology was demonstrated across a range of functionalized substrates, including the preparation of antifungal and antimycobacterial agents on a half-gram scale. A sustainability assessment of the process using Green Metrics, EcoScale, and GreenStar tools confirmed the effectiveness of ethanol as a green solvent for this process., Financial support by Severo Ochoa Centre of excellence program (CEX2021-001230-S) is gratefully acknowledged. The authors thank the financial support from the Spanish Government (PID2022-140111OB-I00 and TED2021-130191B-C41, funded by MCIN/AEI/ 10.13039/501100011033 and European Union NextGenerationEU/PRTR). This study forms part of the Advanced Materials program and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047). In addition, this work has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 101022507. This work was also funded by "Ayuda a Primeros Proyectos de Investigacion (PAID-06-24)", Vicerectorate of Research of the Universitat Politecnica de Valencia (UPV). Jose Luis del Rio-Rodriguez thanks the MCIU for his FPU PhD contract FPU21/02562. Silvia Gutierrez-Tarrino thanks the Universitat Politecnica de Valencia for her postdoctoral contract PAID-10-23.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Organometallic Control of Ru Decoration on CoNi: From Isolated Atoms to Nanoparticles

  • Varela-Izquierdo, Victor
  • Quiroga-Suavita, Felipe
  • Potter, Matthew E.
  • Fazzini, Pier-Francesco
  • Simonelli, Laura
  • Lacroix, Lise-Marie
  • Mazario, Jaime
  • Chaudret, Bruno
  • Cerezo-Navarrete, Christian
  • Gutiérrez-Tarriño, Silvia
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] Engineering surface architectures in multimetallic nanoparticles is crucial for controlling their properties. This work investigates Ru-decorated CoNi nanoparticles prepared by an organometallic approach, yielding Ru as nanoparticles, subnanometric clusters, or isolated atoms. High-resolution electron microscopy (EM) and X-ray absorption spectroscopy (XAS) unambiguously establish these distinct Ru configurations, while X-ray photoelectron spectroscopy (XPS) reveals that Ru binding energies are influenced by coordination environment. Hydrogen-deuterium isotopic exchange further shows that subnanometric Ru maximizes activity, providing superior per-site reactivity. Together, these results demonstrate how the organometallic approach enables the controlled decoration of a platinum-group metal (i.e., Ru) on base metal (i.e., CoNi) nanoparticles, establishing direct correlations between surface architecture, electronic signatures, and potential catalytic functions., V.V.-I. and B.C. are grateful to the French State aid managed by the Agence Nationale de la Recherche under France 2030 plan, bearing the reference code ANR-22-PESP-0010: Projet cible "POWERCO2" within the PEPR project SPLEEN. F.Q.-S. acknowledges the cofunding from the European Union's Horizon Europe research and innovation program under the Marie Sk & lstrok;odowska-Curie Grant Agreement No. 101081465 (AUFRANDE) and is grateful to the NanoX Graduate School of Research program for his internship at LPCNO in Toulouse EUR (grant NanoX No. ANR-17-EURE-0009 in the framework of the "Programme des Investissements d'Avenir"). S.G.-T. thanks the Universitat Politecnica de Valencia for her postdoctoral contract PAID-10-23. P.O.-B. acknowledges the financial support from the Spanish Government (PID2022-140111OB-I00 and TED2021-130191B-C41 funded by MCIN/AEI/10.13039/501100011033 and European Union Next Generation EU/PRTR). This study forms part of the Advanced Materials program and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047). J.M. acknowledges his MSCA individual postdoctoral fellowship from the Horizon Europe research and innovation program (Project 101109254 - BIOCATMAG). The authors want to thank Sourav Ghosh and Theo Duarte De Assuncao from LPCNO for their help at the ALBA synchrotron and for providing the example 3D models, respectively. Finally, the authors acknowledge the ALBA synchrotron facility for beamtime (proposal 2023097824) at the BL22-CLAESS beamline.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhancing the Antioxidant Properties of Carrot Wastes Through Lactic Acid Fermentation and Thermophysical Treatments

  • Bas-Bellver, Claudia Isabel
  • Barrera Puigdollers, Cristina|||0000-0003-4408-3541
  • Seguí Gil, Lucía|||0000-0002-2711-9445
[EN] Carrot wastes contain valuable bioactive compounds, particularly carotenoids, phenolics, and dietary fibre, whose concentration and bioaccessibility can be enhanced through structural and biochemical modifications induced by thermophysical and biological treatments, providing valorization potential. This study evaluated the effects of microwave treatment (1.5 or 3 W/g for 2, 4, and 6 min), ultrasound treatment (100 or 200 g at 40 kHz for 5, 10, or 15 min), and lactic acid fermentation with Lactiplantibacillus plantarum, Ligilactobacillus salivarius, and Limosilactobacillus reuteri for 48 h on the plant cell structure and physicochemical and antioxidant properties of fresh-cut carrot wastes. Among the tested strains, L. salivarius showed the highest growth after 24 h of fermentation (from 8.8 to 9.7 log10 CFU/g), increasing total phenolic content by 1.3-fold. Antioxidant activity improved, with DPPH peaking at 48 h (2.7-fold) and ABTS increasing from early fermentation stages. Ultrasounds enhanced antioxidant properties, so that 100 g¿15 min led to maximum increases in total phenols, flavonoids, and ABTS (fold-increase of 1.3, 2.7, and 1.4, respectively), while DPPH values peaked after 5 min (70% increase). Microwave treatment at 3 W/g increased total phenols and flavonoids 1.3-fold, although prolonged exposure reduced antioxidant activity. Overall, selected thermophysical and fermentation treatments may enhance the bioactive potential of carrot wastes., This research was funded by Universitat Politècnica de València (UPV) under programmes PAID-10-23 and PAID-06-24 Pretramientos termofísicos y biológicos para la mejora de la funcionalidad de productos en polvo obtenidos a partir de residuos de hortalizas, y valoración de su aplicación en el sector agroalimentario .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Polarization-Insensitive Silicon Grating Couplers via Subwavelength Metamaterials and Metaheuristic Optimization

  • Parra Gomez, Jorge|||0000-0003-4610-3411
[EN] Silicon photonics is the leading platform in photonic integrated circuits (PICs), enabling dense integration and low-cost manufacturing for applications such as data communications, artificial intelligence, and quantum processing, to name a few. However, efficient and polarization-insensitive fiber-to-PIC coupling for multipoint wafer characterization remains a challenge due to the birefringence of silicon waveguides. Here, we address this issue by proposing polarization-insensitive grating couplers based on subwavelength dielectric metamaterials and metaheuristic optimization. Subwavelength periodic structures were engineered to act as uniaxial homogeneous linear (UHL) materials, enabling tailored anisotropy. On the other hand, particle swarm optimization (PSO) was employed to optimize the coupling efficiency, bandwidth, and polarization-dependent loss (PDL). Numerical simulations demonstrated that a pitch of 100 nm ensures UHL behavior while minimizing leaky waves. Optimized grating couplers achieved coupling efficiencies higher than ¿3 dB and a PDL of below 1 dB across the telecom C-band (1530¿1565 nm). Three optimization strategies were explored, balancing efficiency, the bandwidth, and the PDL while considering the Pareto front. This work establishes a robust framework combining metamaterial engineering with computational optimization, paving the way for high-performance polarization-insensitive grating couplers with potential uses in advanced photonic applications., This research was partly funded by the Universitat Politecnica de Valencia, grants PAID-10-23 and PAID-06-23, and partly by grant PID2022-137787OB-I00, funded by MCIN/AEI/10.13039/501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On-chip electro-optical spiking VO2/Si device with an inhibitory leaky integrate-and-fire response

  • Morcillo-Roldán, Juan Francisco
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
  • Parra Gomez, Jorge|||0000-0003-4610-3411
[EN] Integrated photonic neuromorphic computing has emerged as an appealing technology to replicate human brain functionalities by leveraging the benefits of integrated photonics. In this context, spiking neural networks (SNNs) offer a highly energy-efficient artificial neural network due to the event-based information processing. In this work, we propose an electro-optical spiking device for the silicon photonics platform based on a VO2/Si waveguide and a meander-shaped microheater. A leaky integrate-and-fire (LIF) response with inhibitory optical spiking is achieved by harnessing the temperature-driven insulator-metal transition (IMT) of VO2 combined with thermal dynamics. Hence, our proposal would not require complex electronic circuitry bottlenecking the neural network. Our numerical simulations demonstrate firing upon milliwatt and nanosecond range postsynaptic pulses and adjustable spike characteristics in the time domain with sub-microsecond values. Therefore, our spiking device could enable scalable and energy-efficient photonic-based SNNs., Universitat Politècnica de València (PAID-06-23, PAID-10-23); Agencia Estatal de Investigación (PID2022- 137787OB-I00); European Health and Digital Executive Agency (101070690 (PHOENIX)); Conselleria d Educació, Investigació, Cultura i Esport (PROMETEO Program (CIPROM/2022/14)).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Magnetic induction synthesis of Ru-decorated encapsulated Co@C nanoparticles for aqueous nitroarene reductions

  • Río-Rodríguez, José Luis del
  • Suarez-Riano, Oscar
  • Gutiérrez-Tarriño, Silvia
  • Chaudret, Bruno
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] Controlling the spatial organization of metallic components in bimetallic nanocatalysts remains a major challenge in catalyst design, particularly when conventional methods offer limited control over metal distribution at the catalyst surface. Here, we report two strategies for incorporating Ru into carbon-encapsulated cobalt nanoparticles (Co@C): conventional thermal treatment (RuCo@C-TH) and magnetic induction heating (RuCo@C-IH). Although both methods introduce Ru into the carbon matrix, they generate markedly different nanoscale organizations. Catalyst characterization shows that induction heating promotes a much closer spatial association between Ru and the original Co@C nanoparticles, consistent with localized heating of the magnetic cores under an alternating magnetic field and in situ decomposition of the Ru precursor in their vicinity. The catalytic consequences of this structural difference were evaluated through a series of aqueous hydrogenation and reductive amination reactions under H2, including nitrobenzene hydrogenation, tandem pyrrole synthesis, benzimidazole formation, and the chemoselective partial reduction of dinitrobenzene to nitroaniline. In all cases, Ru incorporation improves the catalytic behaviour relative to Co@C, enabling these transformations to proceed efficiently in water under mild conditions. However, the magnitude of this effect strongly depends on the synthetic route: whereas the thermally prepared catalyst only shows moderate improvements, the material obtained by magnetic induction consistently delivers much higher conversion and, when relevant, markedly improved selectivity. These results show that magnetic induction heating is not merely an alternative synthetic method, but an effective strategy to control Co-Ru proximity and generate superior bimetallic catalysts for sustainable aqueous-phase transformations., The authors thank the financial support from the Spanish Government (PID2022-140111OB-I00 and TED2021-130191B-C41 funded by MCIU/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR). This study forms part of the Advanced Materials program and was supported by MCIN with partial funding from the European Union Next Generation EU (PRTR-C17.I1) and Generalitat Valenciana (MFA/2022/047, CIPROM/2022/10). This work was also funded by "Ayuda a Primeros Proyectos de Investigacion (PAID-06-24)". J. L. R.-R. thanks the MCIU for his FPU PhD contract FPU21/02562 and the mobility grant for short research stays at international research centers EST25/00101. S. G. T. thanks the Universitat Politecnica de Valencia for her postdoctoral contract PAID-10-23. The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization. Financial support by Severo Ochoa Centre of Excellence program (CEX2021-001230-S) is gratefully acknowledged.