Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The Second Life of Cobalt MOF: Alternating Magnetic Field- Assisted Electrocatalytic Oxygen Evolution Reaction in MOF-derived Nanoparticles

  • del Río-Rodríguez, Jose Luis
  • Márquez, Inmaculada
  • Gallo-Cordova, Álvaro
  • Molina, M. Asunción
  • Martínez, Jordan Santiago
  • Calvente, Juan José
  • Beale, Andrew M.
  • Morales, Maria del Puerto
  • Olloqui Sariego, José Luis
  • Gutiérrez-Tarriño, Silvia
  • Cerezo-Navarrete, Christian
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] A major challenge in hydrogen production from water electrolysis is the slow kinetics of oxygen evolution (OER). Applying an alternating magnetic field (AMF) to ferromagnetic metal nanoparticles on electrodes has gained attention due to the generation of a thermally activated electrocatalyst, which can boost OER performance. This work studies the influence of external parameters and intrinsic characteristics of carbon-encapsulated cobalt MOF-derived nanoparticles deposited onto graphite paper electrodes on the electrocatalytic AMF-OER coupled process. Specifically, the impact of AMF strength, the electrolyte composition (concentration and cation nature) and cobalt content on the electrocatalytic AMF-OER performance are thoroughly investigated. Results reveal that AMF significantly boosts OER activity of Co@C-based electrodes, their enhancement being strongly dependent on the electrolyte composition. Furthermore, both the heating capacity of the herein synthesized catalyst for magnetic hyperthermia and their structural features remain intact after an intense and prolonged electrocatalytic AMF-OER experiment. No signs of sintering, leaching, or particle size increase, which are typical issues observed when metal nanoparticles are subjected to an intense external magnetic field, have been found. This underscores the high operational stability of this catalyst. These findings provide new insights into thermal AMF-assisted alkaline water oxidation for developing high-performance catalysts for enhanced electrocatalysis., Financial support by Severo Ochoa Centre of Excellence program (CEX2021-001230-S) is gratefully acknowledged. The authors thank the financial support from the Spanish Government (PID2021-126799NB-I00, PID2022-140111OB-I00, TED2021-130191B-C41, TED2021-130191B-C42, TED2021-130191B-C43 and RED2022-134120-T funded by MCIU/AEI/ 10.13039/501100011033 and European Union NextGenerationEU/PRTR). This study forms part of the Advanced Materials program and was supported by MCIN with partial funding from the European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047) and Generalitat Valenciana (CIPROM/2022/10). In addition, this work has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 101022507. This work was also funded by "Ayuda a Primeros Proyectos de Investigacion (PAID-06-24)." J.L.R.-R. thanks the MCIU for his FPU PhD contract FPU21/02562. SGT thanks the Universitat Politecnica de Valencia for her postdoctoral contract PAID-10-23. The authors thank Diamond Light Source, particularly the B18 beamline team and D. Gianolio, for their support during the XAS measurements (proposal SP40577-1). M.A.M. acknowledges Laurelin project (European Union's Horizon 2020 - Reference: 101022507) for PDRA contract at UCL.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Insights into the formation of free radicals using metal ferrite nanocatalysts (MFe2O4, M = Fe, Mn, Zn, Co) prepared by a highly reproducible microwave-assisted polyol method

  • Gallo-Cordova, Álvaro
  • Nuñez, Nahuel
  • Díaz-Ufano, Carlos
  • Veintemillas-Verdaguer, S.
  • Soler-Morala, Jimena
  • Palomares, F. Javier
  • Lima, Enio
  • Winkler, Elin L
  • Morales, María Del Puerto
Metal ferrite nanocatalysts possess renowned catalytic properties in advanced oxidation processes. This study aims to elucidate the impact of various parameters on their catalytic activity by measuring the formation of reactive oxygen species. Utilizing a microwave-assisted polyol method, we designed specific catalysts, demonstrating high reproducibility (>95%) of their structural, colloidal, and magnetic properties. Electron paramagnetic resonance (EPR) analysis described intricate catalytic dynamics influenced by buffer composition, particle size, and transition metal doping. The presence of buffer in the EPR measurement of the maghemite nanocatalyst with a size of 14 ± 3 nm induced a secondary reaction between ˙OOH and the DMPO spin-trap, shielding the radical signal by primarily generating CH3 radicals, potentially hindering degradation. Smaller maghemite nanocatalysts (8 ± 2 nm) exhibited enhanced radical production due to increased surface area. Upon metal doping, manganese enhances ˙OOH radical production, while zinc inhibits ROS formation, and cobalt exerts nuanced influence. Additionally, catalytic efficiency in methylene blue degradation varied with the radical species, highlighting ˙OH radicals' superiority for rapid degradation (1 h) over ·OOH (24 h). Overall, this research provides valuable insights into nanoparticle synthesis, radical formation kinetics, and catalytic performance, contributing to the advancement of sustainable catalysis for environmental remediation., This work has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 101007629 (NESTOR Project), the “Plan de Recuperación, Transformación y Resiliencia” financed by the European Union – NextGenerationEU under the Humidity-Plus project and from the Spanish Government (PID2023-150170OB-I00, TED2021- 130191B-C43) by MCIU/AEI/ 10.13039/501100011033 and European Union NextGenerationEU/PRTR. FJP acknowledges financial support from Grants TED2021-132482B-I00 and PID2021-126169OB-I00 funded by MCIN/AEI/10.13039/ 501100011033 and by “ERDF A way of making Europe”. The Servicio Interdepartamental de Investigación at the Universidad Autónoma de Madrid, the TEM Service at the Centro de Biología Molecular Severo Ochoa (CBMSO, CSIC-UAM), and XRD, FTIR and elemental analysis services at ICMM/CSIC are acknowledged for assistance for the characterization studies., The data supporting the findings of this study are included in the article and its ESI.† Additional raw data (e.g., TEM images, FTIR and EPR spectra, and numerical values used in the figures) are available from the corresponding author upon reasonable request., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic hyperthermia in focus: emerging non-cancer applications of magnetic nanoparticles

  • Gavilán, Helena
  • Gallo-Cordova, Álvaro
  • Rábade-Chediak, Maura
  • Páez-Rodríguez, Amira
  • Morales, María Del Puerto
  • Gutiérrez, Lucía
This article is part of the themed collection: Recent Review Articles., Magnetic hyperthermia (MH), which leverages the ability of magnetic nanoparticles (MNPs), located in the tumor, to generate heat upon exposure to an alternating magnetic field (AMF), has long been synonymous with cancer therapy. However, recent advancements highlight emerging applications of MH beyond oncology, including neuromodulation, tissue engineering, biosensing, catalysis, and environmental remediation. All these applications intelligently harness the same principle to achieve a wide range of new functionalities in MNPs besides local heating, including drug release, eradication of pathogens, manipulation of cell membranes, mechanical responses for novel non-invasive therapies, boosting chemical reactions, intensifying processes and degrading or desorbing pollutants like CO<inf>2</inf>, just to name a few. This review provides a comprehensive overview of the latest breakthroughs in non-cancer applications of MH. While some fields, ranging from infection control and organ cryopreservation to nanorobotics in biomedicine, require non-toxic biocompatible and biodegradable MNPs (iron oxides) and AMFs restricted to radiofrequencies in the range of 100–300 kHz and an appropriate field intensity (few tens of kA m−1) to avoid tissue damage, some other areas, like sustainable catalysis, sensing, etc., open up the possibility of using diverse chemical elements besides iron (e.g., cobalt, nickel, carbon) mainly in the form of alloys, and AMFs of higher frequencies (well above 300 kHz) and amplitudes (well above 10–20 kA m−1). Indeed, engineering of MNPs with suitable catalytically active elements (gold, nickel, ruthenium, palladium, etc.), support materials (silica, aluminium/magnesium oxide, etc.) or surface coating with appropriate (bio)molecules (enzymes, RNA/DNA fragments, etc.) is crucial for each application, as well as considering the effect of local temperature (for instance, achieving the Curie temperature, T<inf>c</inf>, of the nanomaterial, provoking the de-swelling of polymers, activating/deactivating enzymes or boosting the efficiency of a catalytic process). Furthermore, this work discusses the current limitations and future directions required to expand the reach of MH. Finally, this review serves as a critical resource for researchers seeking to harness MH beyond cancer treatment and integrate it into novel scientific and technological frontiers. This journal is © 2025 The Royal Society of Chemistry, The authors would like to acknowledge funding from the “Plan de Recuperación, Transformación y Resiliencia” financed by the European Union–NextGenerationEU under H2umidity-Plus project; the Spanish Ministry of Science and Innovation through Project TED2021-130191B-C43, a Ramón y Cajal Research Fellowship (RYC2021-032448-I), and Project PID2023-150760NA-100; Project CNS2023-144321 funded by MICIU/AEI/10.13039/501100011033 and NextGenerationEU/PRTR; Fondo Social del Gobierno de Aragón (grupo DGA E15-23R); and the Severo Ochoa Centres of Excellence program through Grants CEX2023-001286-S and CEX2024-001445-S funded by MICIU/AEI/10.13039/501100011033. This publication is based upon work from COST Action CA23132 “MagneticParticle Imaging for next-generation theranostics and medical research” (NexMPI), supported by COST (European Cooperation in Science and Technology); and within the framework of the Una Europa Seed Funding Project DREAM-Nano (SF2405). A. P.-R. acknowledges funding from Beca Santander-Universidad de Zaragoza. Finally, the authors would like to thank the referees for their meticulous review, which contributed to improving this work., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2024-001445-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Second Life of Cobalt MOF: Alternating Magnetic Field- Assisted Electrocatalytic Oxygen Evolution Reaction in MOF-derived Nanoparticles

  • Río Rodríguez, José Luis del
  • Gutiérrez-Tarriño, Silvia
  • Márquez, Inmaculada
  • Gallo-Cordova, Álvaro
  • Molina, M. Asunción
  • Martínez, Jordan Santiago
  • Calvente, Juan José
  • Cerezo-Navarrete, Christian
  • Beale, Andrew M.
  • Morales, María Del Puerto
  • Olloqui-Sariego, Jose Luis
  • Oña-Burgos, Pascual
A major challenge in hydrogen production from water electrolysis is the slow kinetics of oxygen evolution (OER). Applying an alternating magnetic field (AMF) to ferromagnetic metal nanoparticles on electrodes has gained attention due to the generation of a thermally activated electrocatalyst, which can boost OER performance. This work studies the influence of external parameters and intrinsic characteristics of carbon-encapsulated cobalt MOF-derived nanoparticles deposited onto graphite paper electrodes on the electrocatalytic AMF-OER coupled process. Specifically, the impact of AMF strength, the electrolyte composition (concentration and cation nature) and cobalt content on the electrocatalytic AMF-OER performance are thoroughly investigated. Results reveal that AMF significantly boosts OER activity of Co@C-based electrodes, their enhancement being strongly dependent on the electrolyte composition. Furthermore, both the heating capacity of the herein synthesized catalyst for magnetic hyperthermia and their structural features remain intact after an intense and prolonged electrocatalytic AMF-OER experiment. No signs of sintering, leaching, or particle size increase, which are typical issues observed when metal nanoparticles are subjected to an intense external magnetic field, have been found. This underscores the high operational stability of this catalyst. These findings provide new insights into thermal AMF-assisted alkaline water oxidation for developing high-performance catalysts for enhanced electrocatalysis., Financial support by Severo Ochoa Centre of Excellence program (CEX2021-001230-S) is gratefully acknowledged. The authors thank the financial support from the Spanish Government (PID2021-126799NB-I00, PID2022-140111OB-I00, TED2021-130191B-C41, TED2021-130191B-C42, TED2021-130191B-C43 and RED2022-134120-T funded by MCIU/AEI/ 10.13039/501100011033 and European Union NextGenerationEU/PRTR). This study forms part of the Advanced Materials program and was supported by MCIN with partial funding from the European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047) and Generalitat Valenciana (CIPROM/2022/10). In addition, this work has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 101022507. This work was also funded by “Ayuda a Primeros Proyectos de Investigación (PAID-06-24).” J.L.R.-R. thanks the MCIU for his FPU PhD contract FPU21/02562. SGT thanks the Universitat Politècnica de València for her postdoctoral contract PAID-10-23. The authors thank Diamond Light Source, particularly the B18 beamline team and D. Gianolio, for their support during the XAS measurements (proposal SP40577-1). M.A.M. acknowledges Laurelin project (European Union's Horizon 2020 – Reference: 101022507) for PDRA contract at UCL., With funding form the Spanish government through the "Severa Ochoa Centre of Excellence" accreditation (CEX2021-001230-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development of hybrid nanomaterials based on MXene/Fe3O4 magnetic nanoparticles for photo-magnetic hyperthermia applications

  • Shen, Zhu Peng
  • Cabanelas, Juan Carlos
  • Gallo-Cordova, Álvaro
  • Gutiérrez, Lucía
  • Fernández-Afonso, Yilian
  • San-Miguel, Verónica
  • Marco Cuenca, Julio
  • Maroto-Valiente, Ángel
  • Gavilán, Helena
  • Serrano, María B.
MXenes are two-dimensional transition metal carbides that have emerged as versatile nanomaterials. Their distinctive physicochemical properties and surface characteristics make them ideal platforms for engineering hybrid nanomaterials. The combination of MXenes and magnetic nanoparticles (MNPs) into a single nano-object leads to materials with interesting properties (ferrimagnetism, mechanical strength, and conductivity, etc.) for a broad range of applications. MXenes exhibit good compatibility and excellent photothermal (PTT) properties, while MNPs, particularly iron oxide nanoparticles (IONPs), are widely used for biomedical applications via magnetic hyperthermia (MHT). This work focuses on the development of hybrid nanomaterials combining MXenes and IONPs, prepared through a simple, holistic, and replicable method. The surface of delaminated MXene (dMXene) was covered with well-defined shape IONPs of 14 nm. We have used faceted nanoparticles to achieve point-of-reference magnetic hyperthermia performance. The surface loading of IONPs on the MXenes was controlled by varying the MXene-to-MNPs mass ratio from 10:90 to 90:10. The potential of the hybrids for photo-magnetic hyperthermia was evaluated using near-infrared (NIR) light (1064 nm, 1 W) and alternating magnetic fields (AMFs) of 9.5–17.0 kA/m and 282 kHz, determining their specific absorption rate (SAR) values. For MHT, SAR values of up to 150 W/g (Fe3O4) were observed for the 50:50 hybrid. The characterization of this new nanomaterial revealed synergistic behavior in PTT, achieving SAR values of up to 577 and 1106 W/g (hybrid) for 50:50 and 70:30 mass ratio hybrids, respectively. This work demonstrates the heat-dissipation capabilities of MXene/IONPs hybrids under AMFs and via laser excitation, offering a replicable method for designing magnetic-responsive systems., This work was supported by Grant PID2021-125302NB-I00 funded by Spanish MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe; and by Grant No. 2011/00297/003 Strategic Action Project, Universidad Carlos III de Madrid. H.G. acknowledges the financial support from the Spanish Government through grant RYC2021‐032448‐I and Project PID2023-150760NA-100, funded by Spanish MCIN/AEI/and by “ERDF A way of making Europe”. The funding for the publication of this paper was covered by Universidad Carlos III de Madrid. A.G.-C acknowledges the financial support from the Spanish Government through grant No. TED2021-130191B-C43., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

SLPcalculator: a web-based tool to estimate nanoparticle heating with peak analysis and F-test

  • López-Vázquez, Iago
  • Fernández-Afonso, Yilian
  • Santana-Otero, Antonio
  • Ruta, Sergiu
  • Amigo, Alfredo
  • Morales, María Del Puerto
  • Chantrell, Roy W.
  • Gutiérrez, Lucía
  • Serantes, David
Accurately determining the Specific Loss Power (SLP) remains a major challenge in magnetic hyperthermia and photothermal heating. In this work, we examine the practical implementation of the Peak Analysis Method (PAM), an alternative to Newton's-law-based approaches. Our focus is on how the number of data points affects the identification of the linear regime around the peak of the ΔT(t) curve, as this method relies on calculating and comparing the slopes of the heating and cooling branches around the maximum. Using an F-test-based statistical criterion, we objectively determine the valid linear range and compare the resulting SLP values with those obtained from the Initial Slope Method (ISM), one of the most common Newton-law-based approaches, which also relies on linear range fit. Our results reveal that the correct determination of the linear range leads to significantly different SLP values compared to those obtained using arbitrary time windows, underlining the necessity of employing statistical criteria for a robust and reproducible analysis. Finally, we introduce an open-access website (SLPcalculator.com) that integrates PAM with the F-test, providing a systematic and user-friendly tool for reliable SLP estimation without the need for manual fitting procedures., The authors would like to acknowledge financial support from the Severo Ochoa Program for Centers of Excellence funded by grants CEX2023-001286-S and CEX2024-001445-S. Projects CNS2023-144321, CNS2024-154574, and TED2021-130191B-C43, funded by MCIU/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR. Xunta de Galicia is acknowledged for projects ED431F 2022/005 and ED431B 2023/055. Fondo Social del Gobierno de Aragon (grupo DGA E15-23R) is also acknowledged. D.S. also acknowledges the Ramón y Cajal subprogram (RYC2020-029822-I/AEI/10.13039/501100011033)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2024-001445-S)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

SLPcalculator: a web-based tool to estimate nanoparticle heating with peak analysis and F-test

  • López-Vázquez, Iago
  • Fernández-Afonso, Yilian
  • Santana-Otero, Antonio
  • Ruta, Sergiu
  • Amigo, Alfredo
  • Morales, M. Puerto
  • Chantrell, Roy W.
  • Gutiérrez, Lucía
  • Serantes, David
Accurately determining the Specific Loss Power (SLP) remains a major challenge in magnetic hyperthermia and photothermal heating. In this work, we examine the practical implementation of the Peak Analysis Method (PAM), an alternative to Newton's-law-based approaches. Our focus is on how the number of data points affects the identification of the linear regime around the peak of the ΔT(t) curve, as this method relies on calculating and comparing the slopes of the heating and cooling branches around the maximum. Using an F-test-based statistical criterion, we objectively determine the valid linear range and compare the resulting SLP values with those obtained from the Initial Slope Method (ISM), one of the most common Newton-law-based approaches, which also relies on linear range fit. Our results reveal that the correct determination of the linear range leads to significantly different SLP values compared to those obtained using arbitrary time windows, underlining the necessity of employing statistical criteria for a robust and reproducible analysis. Finally, we introduce an open-access website (SLPcalculator.com) that integrates PAM with the F-test, providing a systematic and user-friendly tool for reliable SLP estimation without the need for manual fitting procedures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Development of hybrid nanomaterials based on MXene/Fe<sub>3</sub>O<sub>4</sub> magnetic nanoparticles for photo-magnetic hyperthermia applications

  • Shen, Z. P.
  • Cabanelas, J. C.
  • Gallo-Cordova, A.
  • Gutiérrez, L.
  • Fernández-Afonso, Y.
  • San-Miguel, V.
  • Cuenca, J. M.
  • Maroto-Valiente, A.
  • Gavilan, H.
  • Serrano, M. B.
MXenes are two-dimensional transition metal carbides that have emerged as versatile nanomaterials. Their distinctive physicochemical properties and surface characteristics make them ideal platforms for engineering hybrid nanomaterials. The combination of MXenes and magnetic nanoparticles (MNPs) into a single nano-object leads to materials with interesting properties (ferrimagnetism, mechanical strength, and conductivity, etc.) for a broad range of applications. MXenes exhibit good compatibility and excellent photothermal (PTT) properties, while MNPs, particularly iron oxide nanoparticles (IONPs), are widely used for biomedical applications via magnetic hyperthermia (MHT). This work focuses on the development of hybrid nanomaterials combining MXenes and IONPs, prepared through a simple, holistic, and replicable method. The surface of delaminated MXene (dMXene) was covered with well-defined shape IONPs of 14 nm. We have used faceted nanoparticles to achieve point-of-reference magnetic hyperthermia performance. The surface loading of IONPs on the MXenes was controlled by varying the MXene-to-MNPs mass ratio from 10:90 to 90:10. The potential of the hybrids for photo-magnetic hyperthermia was evaluated using near-infrared (NIR) light (1064 nm, 1 W) and alternating magnetic fields (AMFs) of 9.5–17.0 kA/m and 282 kHz, determining their specific absorption rate (SAR) values. For MHT, SAR values of up to 150 W/g (Fe3O4) were observed for the 50:50 hybrid. The characterization of this new nanomaterial revealed synergistic behavior in PTT, achieving SAR values of up to 577 and 1106 W/g (hybrid) for 50:50 and 70:30 mass ratio hybrids, respectively. This work demonstrates the heat-dissipation capabilities of MXene/IONPs hybrids under AMFs and via laser excitation, offering a replicable method for designing magnetic-responsive systems.