Pasar al contenido principal

PROCESADO AVANZADO DE BIOCOMPOSITES PUNTOS CUANTICOS-POLIMERO MEDIANTE TECNICAS ELECTRODINAMICAS/SECADO Y POLIMERIZACION IN SITU (TECHQD)

PID2023-152869OB-C22

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 47
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental and Numerical Investigations on Compressive Performance of Additively Manufactured PLA Structures with Various Infill Patterns

  • Llidó Barragán, Alexandra|||0009-0006-4847-8048
  • Unamuno-Garay, Aritz
  • Ferrándiz Bou, Santiago|||0000-0001-7137-9298
  • Pavón-Vargas, Cristina Paola|||0000-0003-2902-0059
  • Motoc, Dana Luca
[EN] Additive manufacturing, particularly Fused Deposition Modeling (FDM), has emerged as a promising technology for construction applications due to its ability to fabricate complex geometries, optimize material usage, and enable customized designs. This study investigates the effects of different infill patterns and densities on the compressive behavior of polylactic acid (PLA) specimens to identify suitable configurations for industrial applications. Cubic specimens (50 mm × 50 mm × 50 mm) were designed in SolidWorks, sliced with PrusaSlicer using various conventional and bio-inspired infill patterns, and manufactured using a Prusa i3 MK3S printer. Compression tests were conducted to evaluate stiffness, strength, toughness, and deformation capacity. In addition, finite element method (FEM) simulations were carried out to predict the mechanical response under compressive loading. The results showed that the honeycomb infill pattern provided the best overall performance, combining moderate stiffness with high deformation capacity, reaching strains of approximately 40% before failure, and exhibiting superior energy absorption. Among the tested configurations, an infill density of 20% offered the best balance between mechanical performance, material consumption, and printing time. These findings demonstrate that honeycomb-based structures with moderate infill densities are promising candidates for lightweight engineering applications requiring high energy dissipation and damage tolerance., This research is a part of the grant PID2023-152869OB-C22, funded by MCIN/AEI/10.13039/ 501100011033 and the European Union NextGenerationEU /PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Thorough characterization of polyoxyethylene sorbitan monopalmitate plasticized PLA/pectin composites: Insights into material properties and thermomechanical performance

  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Montanes, Nestor|||0000-0001-6070-127X
  • Dominici, Franco
  • Puglia, Debora
  • Torre, Luigi
[EN] By using dual-screw extrusion and injection molding process, different polymeric composites based on the combination of polylactic acid and pectin were successfully developed. To enhance the performance of the developed materials, plasticization was carried out by using polyoxyethylene sorbitan monopalmitate. In the composite containing 15¿wt% (weight) of pectin along with the plasticizer in 20 phr (per hundred resin), the elongation at break reached 23.6¿%, accompanied by a limited reduction in tensile strength. The incorporation of the plasticizer played a crucial role in determining the outcome of the composites, as it effectively reduced the glass transition temperature (Tg), thereby promoting improvements in ductile properties at room temperature and also increasing the crystallization ability of the samples. The polymer composites underwent testing through various techniques, including assessments of thermomechanical, chemical, color, and water uptake properties., This research is a part of the grant PID2023 152869OB-C22, and the grant TED2021 131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU /PRTR. The authors also thank Generalitat Valenciana - GVA, grant number CIGE/2023/46 and CIAICO/2023/253, for supporting this work. L. Quiles-Carrillo would like to thank the Ministry of Science, Innovation and Universities of Spain for the Jos¿e Castillejo grant for the international mobility of early-career researchers, with reference CAS22/ 00024. N. Montanes would like to express his gratitude to the Ministry of Science, Innovation and Universities of Spain for the grant awarded under Modality A, Stays for senior teaching and/or research staff in foreign centers, with reference PRX22/00424. J. Ivorra-Martinez thanks Generalitat Valenciana - GVA for funding a postdoc position through the CIAPOS program co-funded by ESF Investing in your future, grant number CIAPOS/2023/362.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Biobased plasticizers derived from fumaric acid for ductility improvement in injection-molded polylactide

  • Vicente-Vinas, Maria del Puig|||0009-0005-0024-1503
  • Silvestre Botella, Jordi
  • Montanes, Nestor|||0000-0001-6070-127X
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
[EN] The intrinsic brittleness of poly(lactide) (PLA) remains a major limitation for applications requiring a suitable balance between stiffness and toughness. In this work, four bio-based fumaric acid esters with different alkyl-chain lengths and architectures, namely diethyl fumarate (DEF), diisopropyl fumarate (DPF), dibutyl fumarate (DBF), and bis(2-ethylhexyl) fumarate (DEHF), were evaluated as plasticizers for PLA. Formulations containing 10 and 20 wt% of each fumarate were prepared by melt extrusion followed by injection molding and characterized in terms of their mechanical, morphological, chemical, thermal, viscoelastic, thermomechanical, and migration behavior. At 10 wt%, none of the fumarates induced a brittle-to-ductile transition, and the formulations largely retained the rigid and brittle mechanical response of neat PLA. In contrast, the incorporation of 20 wt% of DEF, DPF, and DBF produced pronounced plasticization, with substantial reductions in stiffness and glass transition temperature and an increase in elongation at break from 6.7% for neat PLA to 212.9¿326.0%. Conversely, PLA formulations plasticized with DEHF exhibited a markedly different behavior. Even at 20 wt%, DEHF retained comparatively high stiffness, showed a smaller reduction in glass transition temperature, and maintained good dimensional stability, while improving Charpy impact strength from 4.8 to 8.5 kJ m¿2. Overall, the results demonstrate that the plasticization efficiency and retention of fumaric acid esters are strongly governed by their molecular architecture. Short- and medium-chain fumarates provide highly ductile PLA formulations, whereas the bulky and branched structure of DEHF promotes enhanced toughness while preserving comparatively high rigidity., This research is a part of the grant PID2023-152869OB-C22, funded by MCIN/AEI/10.13039/501100011033 (Spain) and by the European Union "NextGenerationEU"/PRTR and by ERDF A way of making Europe. The authors also thank Generalitat Valenciana-GVA (Spain) , grant numbers CIGE/2023/46 and CIAICO/2023/253, for supporting this work. Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

From Melt Processing to Composting: Solvent-Free Thermoplastic Starch/Polyvinyl Alcohol Blends with Tailored Structure and Performance

  • Pawlak, Franciszek
  • Aldas, Miguel
  • Motoc, Dana Luca
  • Pavón-Vargas, Cristina Paola|||0000-0003-2902-0059
  • Rosa-Ramírez, Harrison de la|||0000-0002-2913-7938
[EN] Thermoplastic starch (TPS) and polyvinyl alcohol (PVA) blends were prepared over the full compositional range (0-100 wt% PVA) by solvent-free twin-screw extrusion and injection molding. This enabled a systematic evaluation of structure-performance-disintegration relationships under industrially relevant conditions. The blends exhibited clear composition-dependent trends in thermal and mechanical behavior. Increasing PVA content from 0 to 100 wt% raised the onset degradation temperature (T5%) from 160.5 degrees C to 290.5 degrees C and increased crystallinity from near zero to 12.24%. Mechanically, the response evolved from a rigid TPS-rich state to a ductile PVA-rich one. FTIR and SEM analyses indicated partial compatibility, with limited molecular-level interactions leading to morphologically homogeneous but only partially miscible blends. Under simulated composting conditions, all formulations showed substantial physical disintegration. PVA-rich blends (>= 60 wt%) disintegrated rapidly (>80% mass loss within two days), primarily by dissolution rather than microbial degradation. Overall, this work provides a comprehensive, scalable assessment of solvent-free TPS/PVA blends, clarifies their limited compatibility under melt processing, and demonstrates how composition can be used to tailor structure, performance, and disintegration behavior across the full compositional range., This research is a part of the grant PID2023-152869OB-C22 funded by MCIN/AEI/10.13039/501100011033 by the European Union "NextGenerationEU"/PRTR. This work has been also supported by Escuela Politecnica Nacional with the Project PIGR 23-13.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sustainable Approach to Overcome Polylactide Brittleness with Biobased Esters of Isosorbide and Fatty Acids

  • Mario Nicolás
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Balart, Rafael|||0000-0001-5670-7126
  • Guijarro, Néstor
  • Marset, Xavier
[EN] This work reports on the design and synthesis of sustainable plasticizers from plant-based isosorbide to enhance the intrinsic brittleness of polylactide (PLA). To keep fully biobased carbon, isosorbide was esterified with fatty acids of varying chain length, leading to isosorbide dibutyrate (IDB), dicaprylate (IDC), and dipalmitate (IDP). These esters were incorporated into PLA at different concentrations. An approach to assess PLA-plasticizer miscibility was conducted by calculating solubility parameters (¿) and the Flory¿Huggins interaction parameter, ¿. The effect of plasticizer type and concentration on mechanical, thermal, and thermomechanical properties, as well as on microstructure and biodegradation, was also addressed. The results indicated that IDB and IDC notably enhanced PLA toughness, reducing the PLA¿s glass transition temperature (Tg) from 60.3 to 27.7 °C with 20 wt % IDC. Consequently, strain at break dramatically increased from 12.8% (PLA) to over 300% with 20 wt % IDB or IDC. In contrast, IDP exhibited limited miscibility, resulting in phase separation, though it still improved the impact strength and ductility. All formulations demonstrated exceptional disintegration in compost soil, underscoring their potential as ¿double green¿ plasticizers suitable for PLA. Since both PLA and isosorbide can be industrially derived from starch, this work places starch as a key platform for sustainable polymers., This research is a part of the grant PID2023-152869OB-C22, and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union "NextGenerationEU"/PRTR. The authors also thank Generalitat Valenciana-GVA, grant number CIGE/2023/46 and CIAICO/2023/253, for supporting this work. J.G.-C. wants to thank FPU20/01732 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. J.I.-M. thanks Generalitat Valenciana-GVA for funding a postdoc position through the CIAPOS program cofunded by ESF Investing in your future, grant number CIAPOS/2023/362. X.M. thanks the Spanish Ministerio de Ciencia e Innovacion (PID2021-127332NB). N.G. thanks the Spanish Ministry of Science & Innovation for the "Ramon y Cajal" Program (RYC2018-023888-I), as well as the support received via the projects CNS2023-145354 and PID2021-128805NA-I00. This project has also received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (grant agreement no. 948829).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Advancing Sustainable Plastics through the Optimization of Glycerolplasticized Gluten as a Renewable Polymer Alternative

  • Peñafiel-Alvarado, J. I.
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Balart, Rafael|||0000-0001-5670-7126
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
[EN] This study investigates the development of gluten-based samples through extrusion and injection molding, focusing on optimizing extrusion conditions to enhance material properties. During the extrusion process, the combined effect of shear and heat induces protein denaturation, promoting the formation of ß-sheets as confirmed by chemical characterization. Variations in extrusion parameters affect the torque evolution throughout processing, revealing their influence on structural behavior. A statistical analysis identified extrusion temperature, time, and screw speed as significant factors determining the mechanical performance of the samples. Thermal and thermo-mechanical analyses revealed that increasing extrusion severity resulted in an increase in tensile strength (from 2.80 to 4.14 MPa) and stiffness (from 133 to 280 MPa), along with an increase in elongation at break (from 11.7 to 29.8%). Additionally, the denaturation peak shifted from 93.1 °C to 78.2 °C, with a reduction in enthalpy from 170.6 to 57.2 J/g. Dynamic mechanical analysis showed an increase in storage modulus (from 30.2 to 45.1 MPa). Despite extensive prior research indicating that processing variables significantly influence protein denaturation and the resulting material characteristics, the distinct and synergistic impacts of critical extrusion parameters on thermoplastic gluten systems remain insufficiently understood. The present analysis underscores that precise regulation of extrusion conditions plays a fundamental role in modulating both the mechanical behavior and thermal stability of gluten-derived materials, thereby enabling the optimization of their functional performance., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This research is a part of the grant PID2023-152869OB-C22, and thegrant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU /PRTR. Theauthors also thank Generalitat Valenciana - GVA, grant number CIGE/2023/46 and CIAICO/2023/253, for supporting this work. J. Ivorra-Martinez thanks Generalitat Valenciana - GVA for funding a postdoc position through the CIAPOS program co-funded by ESF Investing in yourfuture, grant number CIAPOS/2023/362. Funding for open access charge: CRUE-Universitat Politècnica de València. J. Gomez-Caturla wants tothank FPU20/01732 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. Grant JDC2024-053063-Ifunded by MICIU/AEI /10.13039/501100011033 and by the FSE+. Grant JDC2024-053152-I funded by MICIU/AEI /10.13039/501100011033and by the FSE+.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sustainable Carbon Dioxide Valorization Through Catalytic and Non-Catalytic Routes: A DFT Study

  • Hernandez Fernandez, Joaquin Alejandro
  • Palomo, Jose Alfonso Prieto
  • López-Martínez, Juan|||0000-0001-6904-2282
[EN] This study presents a comprehensive thermodynamic evaluation of several CO2 conversion pathways, both non-catalytic and catalyst-assisted, using density functional theory (DFT) calculations in Gaussian 16 (B3LYP/6-311++G(d,p)). In the non-catalyzed section, three key routes are examined: hydrogenation (CO2 + H2 -> CO + H2O), dry methane reforming, and the reverse water-gas shift (RWGS). For the hydrogenation reaction, the Gibbs free energy change (Delta G) decreases from +0.018 to +0.005 Hartree as the temperature increases from 298.15 K to 1173.15 K, indicating a slight improvement in feasibility but still a high activation barrier of 0.326 Hartree, underscoring the need for catalysis. Dry methane reforming is both exothermic and spontaneous, with Delta G approximate to = -0.049 Hartree at 298.15 K and -0.030 Hartree at 593.15 K; however, operating under harsh conditions may accelerate degradation of reactor materials. In the catalyst-assisted section, copper surfaces and Cu3M clusters (M = Sc, V, Ni, Cu, Co and Fe) are evaluated alongside two bimetallic catalysts, Fe2 and Ni2, under electrochemical CO2 reduction (eCO2RR) conditions. Scandium- and vanadium-doped clusters exhibit significant CO2 adsorption, as evidenced by shifted vibrational frequencies between 800 and 1800 cm-1 that signal C=O bond weakening. Under the evaluated thermobarometric conditions, Ni2-containing systems displayed lower Gibbs energy values within their own optimized intermediate set and higher entropy values than the corresponding Fe2-containing set, suggesting greater configurational flexibility and favorable stabilization trends. However, because Fe2 and Ni2 systems are chemically different, absolute total energies were not used as a standalone criterion for intrinsic catalytic superiority. Overall, while some non-catalytic routes become thermodynamically more favorable only at high temperature, the explicit inclusion of catalytic models, particularly doped Cu3M clusters and Ni-containing systems, indicates enhanced CO2 activation through stronger catalyst-adsorbate interactions, vibrational weakening of C=O bonds, and favorable electronic descriptors. These results suggest that catalytic systems may enable CO2 conversion under milder conditions, although full kinetic confirmation requires comparative transition state calculations for each elementary catalytic step., This research was funded by MCIN/AEI/10.13039/501100011033 through grant PID2023-152869OB-C22.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tuned flexibility with phenethyl esters plasticized polylactic acid

  • Gazquez-Navarro, Jose Javier
  • Dominici, Franco
  • Puglia, Debora
  • Torre, Luigi
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
[EN] This study explores improving polylactic acid (PLA) by incorporating phenethyl-based plasticizers. PLA is a biobased polymer that tends to be rigid and has limited flexibility. To address this, 20¿wt% phenethyl esters were added through extrusion and injection molding. These esters are formed by esterifying carboxylic acids of various chain lengths with phenol, and both reactants can be sourced from nature, making this a sustainable approach. Including phenethyl plasticizers greatly increased PLA¿s elongation at break from 3.4¿% to over 130¿%, though tensile strength fell from 70.5¿MPa to between 20 and 25¿MPa. This change was evident in the fracture surfaces, which showed signs of plastic deformation. Thermal and thermomechanical tests revealed a lower glass transition temperature, improving chain mobility and allowing PLA to become ductile at room temperature. Although initial thermal degradation began at a lower temperature, the maximum degradation temperature rose slightly, suggesting enhanced thermal stability due to possible antioxidant effects of the plasticizers. Regarding shape memory, phenethyl plasticizers improved the recovery rate of the samples, expanding potential applications. Overall, these findings demonstrate the effectiveness of phenethyl-based plasticizers in improving PLA¿s flexibility and shape memory behavior, making it a more versatile material., This research is a part of the grant PID2023 152869OB-C22, and the grant TED2021 131762A-I00, funded by MCIN/AEI/10.13039/ 501100011033 and by the European Union NextGenerationEU /PRTR. The authors also thank Generalitat Valenciana - GVA, grant number CIGE/2023/46 and CIAICO/2023/253, for supporting this work. Juan Ivorra-Martinez thanks Generalitat Valenciana - GVA for funding a postdoc position through the CIAPOS program co-funded by ESF Investing in your future, grant number CIAPOS/2023/362. Franco Dominici, Debora Puglia and Luigi Torre acknowledge University of Perugia and MUR for support within the project Vitality. This work has been funded by the European Union─NextGenerationEU under the Italian Ministry of University and Research (MUR) National Innovation Ecosystem grant ECS00000041─VITALITY. Microscopy Services at UPV are also acknowledged for their help in collecting and analyzing images.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Reactor-Grade Non-Additive Polypropylene Architecture Defines the Physicochemical Limits of Melt Flow Index Model Transferability: An Industrial Chemometric and Machine Learning Study

  • Hernandez-Fernandez, Joaquin
  • López-Martínez, Juan|||0000-0001-6904-2282
[EN] Rapid estimation of the melt flow index (MFI) is essential for the timely control of industrial polypropylene polymerization because conventional plastometer measurements require offline sampling and introduce analytical delays. This work investigates the physicochemical limits of MFI model transferability using 425 reactor-grade polypropylene production runs spanning homopolymer, random copolymer, and impact copolymer architectures. Principal component analysis (PCA), partial least squares (PLS), PCR-Ridge, Random Forest, Extra Trees, and Gradient Boosting were evaluated using within-pool, repeated five-fold, and product group validation. The latent structure, predictive performance, and dominant process descriptors were strongly architecture-dependent. Hydrogen-related variables remained central to molecular weight control, whereas comonomer descriptors, catalyst and donor variables, hydrodynamic conditions, and second reactor variables gained importance as compositional and morphological complexity increased. Nonlinear ensembles improved prediction within heterogeneous pools, but product group validation still revealed transferability losses when models crossed architecture-dependent process-structure-property domains. Repeated cross-validation and preprocessing sensitivity analyses confirmed that the principal model rankings and architecture-dependent conclusions were stable under resampling and correlation filtering. These results show that the polymer architecture defines a practical applicability boundary for industrial MFI soft sensors and supports architecture-specific or architecture-routed calibration when universal models fail cross-family validation., This research was funded by MCIN/AEI/10.13039/501100011033 through grant PID2023-152869OB-C22.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development and Characterization of Ductile Polylactic Acid Blends with Plasticized Zein for Injection Molding Applications

  • Lázaro-Hernández, C.|||0009-0002-8250-9363
  • Mario Nicolás
  • Vicente-Vinas, Maria del Puig|||0009-0005-0024-1503
  • Boronat, Teodomiro|||0000-0002-2144-2874
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
[EN] This study explores the development of polylactic acid (PLA) blends incorporating plasticized zein, a corn-derived protein, and dipropylene glycol (DPG) as a biobased plasticizer to enhance compatibility and processability. Blends were produced via twin-screw extrusion and injection molding, with plasticized zein content ranging from 10 to 50 wt%. Mechanical testing showed a significant increase in ductility, with elongation at break rising from 6.3% (neat PLA) to 56.3% (50 wt% zein), accompanied by reduced tensile strength (58.4 MPa to 22.7 MPa) and impact resistance (42.2 kJ/m2 to 11.5 kJ/m2), due to phase separation and limited compatibility. Shore D hardness slightly declined (from 82.9 to 77.4). Thermal analysis revealed the Tg decreasing from 59.5 °C to 39.9 °C as zein content increased. Thermogravimetric analysis showed reduced thermal stability with zein addition, dropping the initial degradation temperature from 360.0 °C to 188.2 °C. Morphological analysis indicated greater heterogeneity at higher zein levels due to partial miscibility. Colorimetric data showed visible changes, and FTIR spectra confirmed physical interactions and partial miscibility between PLA and zein., This research is a part of the grant PID2023-152869OB-C22, and the grant TED2021-131762 A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU /PRTR. The authors also thank Generalitat Valenciana - GVA, grant number CIGE/2023/46 and CIAICO/2023/253, for supporting this work. C. Lazaro-Hdez thanks Generalitat Valenciana - GVA for funding a predoc position through the CIACIF program co-funded by ESF Investing in your future, grant number CIACIF/2023/244. M. Miranda-Pinzon thanks Vice-rectorate for Research of the Universitat Politècnica de València (UPV) for funding a predoctoral contract in the PAID-01-24 program. J. IvorraMartinez thanks Generalitat Valenciana - GVA for funding a postdoc position through the CIAPOS program co-funded by ESF Investing in your future, grant number CIAPOS/2023/362. Microscopy services at UPV are also acknowledged for their help in collecting and analyzing FESEM images. Funding for open access charge: CRUE-Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Industrial Validation of Green Hydrogen for Polypropylene Production: Process Stability, Catalyst Performance, and Product Quality

  • Hernandez-Fernandez, Joaquin
  • López-Martínez, Juan|||0000-0001-6904-2282
[EN] The transition toward lower-carbon polyolefin manufacturing requires evaluating whether renewable hydrogen can be used in industrial polypropylene production while maintaining acceptable process operation and product quality. In this study, an industrial gas-phase polypropylene production campaign that used electrolytic hydrogen was assessed using statistical and multivariate analyses. A dataset comprising 1441 process observations and more than 100 laboratory measurements was analyzed to characterize process variability, catalyst-feed stability, fouling behavior, and polypropylene quality. The monitored variables included the H2/C3, triethylaluminum-to-titanium selectivity-control-agent-to-titanium (TEAL/Ti), SCA/Ti, and TEAL/SCA ratios, production rate, reactor pressure, distributor-plate pressure drop, recycle-system variables, and fouling indicators. Product quality was evaluated through melt flow index, xylene solubles, bulk density, and residual catalyst species. Descriptive statistics, temporal analysis of variance, Pearson correlation analysis, and principal component analysis were applied to identify the main sources of operational variability and their relationships with product quality. During the evaluated campaign, the process maintained an average production rate of 30.62 +/- 0.69 t h-1, with low variability in the principal catalyst-feed ratios. The polypropylene exhibited an average melt flow index of 2.10 +/- 0.11 g/10 min and a xylene-soluble content of 1.19 +/- 0.08 wt.%, both within the specifications considered for the commercial grade produced. Temporal analysis of variance identified catalyst ratios, hydrogen utilization, and production rate as the variables with the largest temporal effects, whereas the distributor-plate fouling factor showed comparatively limited variation. The first two principal components explained 58.99% of the total process variance, with hydrogen utilization, catalyst-related variables, reactor pressure, and space-time yield among the dominant contributors. These results provide industrial-scale evidence that electrolytic hydrogen can be integrated into the investigated polypropylene process while maintaining stable operation and specification-compliant product quality during the evaluated period. However, because no parallel or matched campaign using fossil-derived hydrogen was available under the same plant, catalyst, grade, and operating conditions, the present results should not be interpreted as demonstrating full equivalence or direct replacement of conventional hydrogen. Instead, the study establishes an operational baseline and a multivariate monitoring framework for future comparative validation of the use of renewable hydrogen in polyolefin manufacturing., This research was funded by MCIN/AEI/10.13039/501100011033 through grant PID2023-152869OB-C22.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A New Use of Polysorbate-Type Nonionic Surfactants as Plasticizers for Highly Flexible Poly(lactide) Formulations

  • Gázquez-Navarro, José Javier
  • Garcia-Sanoguera, David|||0000-0002-1923-9519
  • Balart, Rafael|||0000-0001-5670-7126
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
[EN] Polysorbates are non-ionic amphiphilic organic compounds, widely used as surfactants. They have a molecular weight in the 1200-1400 g mol-1 range, so they are on the borderline between monomeric and polymeric plasticizers. Therefore, they can potentially provide the benefits of both plasticizer types. In this work, polyethylene glycol sorbitan monolaurate (Tween (R) 20), and polyethylene glycol monooleate (Tween (R) 80) are proposed as environmentally friendly plasticizers for PLA with enhanced ductile properties. The addition of 20 wt% of polysorbates into a PLA matrix, leads to a noticeable increase in elongation at break, from 4.0% (neat PLA) up to values around 180%. The plasticization efficiency was assessed by the decrease in the glass transition temperature (Tg), from 61.0 degrees C (neat PLA) down to such los values of 29.5 degrees C, and 36.6 degrees C, for plasticized PLA formulations with 30 wt% Tween (R) 20, and 30 wt% Tween (R) 80, respectively. Moreover, due to the high molecular weight of polysorbates, they are not highly volatile, which allows processing PLA by conventional extrusion and injection molding without plasticizer volatilization. This works widens the industrial applications of polysorbates, as cost-effective, highly efficient and environmentally friendly plasticizers for PLA with enhanced toughness., This research is a part of the grants PID2023-152869OB-C22, funded by MCIN/AEI/https://doi.org/10.13039/501100011033 and the grant TED2021-131762 A-I00, funded by MCIN/AEI/https://doi.org/10.13039/501100011033 and by the European Union "NextGenerationEU"/PRTR. Authors also thank Generalitat Valenciana-GVA for funding this research through the grant numbers AICO/2021/025 and CIGE/2021/094. J. Gomez-Caturla wants to thank FPU20/01732 grant funded by MCIN/AEI/https://doi.org/10.13039/501100011033 and by ESF Investing in your future.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Selective lignin conversion via flow photocatalysis for vanillin and bioplasticizers production

  • Marset, Xavier
  • Montilla-Verdú, Salvador
  • Pastor, Francisco J.
  • Rico, Elio
  • Bertella, Stefania
  • Ortuño, Manuel A.
  • Aschauer, Ulrich
  • Guijarro, Néstor
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Mario Nicolás
  • Lázaro-Hernández, C.|||0009-0002-8250-9363
  • Balart, Rafael|||0000-0001-5670-7126
[EN] Lignin valorization remains a roadblock in the development of green biorefineries. Currently, depolymerization strategies predominantly depend on energy- and resource-intensive thermochemical methods, while potential applications of the resulting bio-based products are often overlooked. Here, we show a scalable photocatalytic flow reactor for lignin deconstruction that operates at ambient conditions, along with a downstream process that yields commercially viable products at gram scale. An anthraquinone-based photocatalytic platform, when packed in a flow bed reactor, is demonstrated to selectively and nearly quantitatively cleave lignin¿s ß-O-4 moieties, achieving a benchmark yield of 7.1¿wt% for vanillin. The utilization of residual oligomers as plasticizers for biobased polylactic acid resulted in improved mechanical properties and shape memory effects, while maintaining its suitability for conventional 3D printing. This aldehyde-oriented platform represents a key advancement that complements existing ketone-oriented photocatalytic approaches targeting valuable chemicals from lignin conversion, and it ultimately contributes to the holistic utilization of lignin., This research is a part of the grant PID2023-152869OB-C22, and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU /PRTR. The authors also thank Generalitat Valenciana - GVA, grant number CIGE/2023/46 and CIAICO/2023/253, for supporting this work. J. G.-C. wants to thank FPU20/01732 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. M.M.-P. thanks Vice-rectorate for Research of the Universitat Politècnica de València (UPV) for funding a predoctoral contract in the PAID-01-24 program. M.A.O. thanks the Ramon y Cajal Program (RYC2022-035453-I) funded by MICIU/AEI/10.13039/501100011033 and FSE + . C.L.-H. wants to thank CIACIF/2023/244 grant funded by Generalitat Valenciana GVA. U.A thanks the supercomputer resources provided by the Vienna Scientific Cluster (VSC). N.G. thanks the Ramon y Cajal Program (RYC2018-023888-I) funded by MCIN/AEI/ 10.13039/501100011033. The authors also thank the support of the Generalitat Valenciana/FEDER (Spain) through the project IDIFEDER/2020/002. This research is also part of the project PID2021-128805NA-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU /PRTR. This project has received funding from the European Research Council (ERC) under the European Union s Horizon 2020 research and innovation programme (grant agreement no. 948829).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effects of Thermal Annealing on the Structure Properties Relationship of Plasticized Polylactic Acid with Citrates

  • Lázaro-Hernández, C.|||0009-0002-8250-9363
  • Mario Nicolás
  • Balart, Rafael|||0000-0001-5670-7126
  • Boronat, Teodomiro|||0000-0002-2144-2874
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
[EN] This study investigates the effect of annealing on neat polylactic acid (PLA) and PLA plasticized with 20 wt% triethyl citrate (TEC) and acetyl tributyl citrate (ATBC), processed by twin-screw extrusion followed by injection molding. Two annealing treatments were applied at a lower temperature (T1-located at 10% above the onset of cold crystallization) and a higher temperature (T2- located at 10% below the endset of cold crystallization). The employed temperatures were provided by a calorimetric pre-study to assess the crystallization behavior. Mechanical characterization showed that annealing increased stiffness and brittleness, as indicated by a reduction in elongation at break from 276.7% (T0-without annealing treatment) to 53.7% (T2) for plasticized PLA with 20 wt% TEC, and an increase in tensile strength from 17.3 MPa (T0) to 25.1 MPa (T2). Charpy impact testing revealed higher energy absorption in T1, while surface hardness improved after annealing, with Shore D values for PLA increasing from 78.2 (T0) to 82.0 (T1). Thermal analysis demonstrated that annealing suppressed cold crystallization and substantially increased crystallinity, in PLA plasticized with 20 wt% ATBC rising from 34.1% (T0) to 65.3% (T2), without significantly affecting thermal stability. Plasticization reduced the glass transition temperature, although annealing partially restored rigidity. X-ray diffraction confirmed the higher crystalline order, and colorimetric evaluation showed perceptible changes in brightness and tone. Scanning electron microscopy revealed rougher fracture surfaces in annealed samples, which suggests a possible relationship with greater degree of crystallinity. Gel permeation chromatography indicated slight molecular weight degradation in neat PLA, whereas plasticized formulations remained stable., This research is a part of the grant PID2023-152869OBC22, and the grant TED2021-131762 A-I00, funded by MCIN/AEI/ https://doi.org/10.13039/501100011033 and by the European Union NextGenerationEU /PRTR. The authors also thank Generalitat Valenciana - GVA, grant number CIGE/2023/46 and CIAICO/2023/253, for supporting this work. C. Lazaro-Hdez thanks Generalitat Valenciana - GVA for funding a predoc position through the CIACIF program co-funded by ESF Investing in your future, grant number CIACIF/2023/244. M. Miranda-Pinzon thanks Vice-rectorate for Research of the Universitat Politècnica de València (UPV) for funding a predoctoral contract in the PAID-01-24 program. J. Ivorra-Martinez thanks Generalitat Valenciana - GVA for funding a postdoc position through the CIAPOS program co-funded by ESF Investing in your future, grant number CIAPOS/2023/362. Funding for open access charge: Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Decoupling Formulation and Processing Effects in Thermoplastic Starch Through a Data-Driven Structure-Property Framework

  • Pavón-Vargas, Cristina Paola|||0000-0003-2902-0059
  • Llidó Barragán, Alexandra|||0009-0006-4847-8048
  • López-Martínez, Juan|||0000-0001-6904-2282
  • Martínez-Romera, Nerea
[EN] Thermoplastic starch (TPS) is a melt-processable biopolymer whose properties depend strongly on formulation and processing. This work analyzes the combined influence of starch origin (corn, potato, rice), plasticizer system (glycerol, glycerol-triethyl citrate), and processing temperature (125 degrees C-135 degrees C) on the microstructure, mechanical, water-interaction, thermal and rheological behavior of extruded and injection-molded TPS. Potato TPS forms the strongest matrices (approximate to 2.0-3.4 MPa), corn TPS attains an intermediate strength level (approximate to 1.3-1.5 MPa), and rice TPS becomes highly ductile but less strong when plasticized with Gly-TEC (elongation approximate to 58%-82%, strength approximate to 0.5-0.8 MPa). Replacing glycerol with Gly-TEC increases ductility in all starches while shifting water uptake within a 32-59 wt.% window, decreasing it in corn and potato TPS and increasing it in rice TPS. All formulations exhibit pronounced shear-thinning, and Gly-TEC lowers melt viscosity and enhances processability. Principal component analysis and random forest modeling reveal a hierarchy among the governing parameters, decoupling formulation and processing contributions within a structure-property framework: starch origin defines the intrinsic property baseline, plasticizer composition controls the mechanical-hydrophilic response, and processing temperature fine-tunes ductility, while the model's accuracy (R 2 approximate to 0.94 for strength, 0.90 for elongation) confirms reliable TPS property prediction., This research was funded by MCIN/AEI/10.13039/501100011033 through grant PID2023-152869OB-C22 by the European Union "NextGenerationEU"/PRTR and Universitat Politecnica de Valencia (PAID-10-23, PAID-01-22). Funding for open access charge:CRUE-Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tree mallow as an alternative filler in recycled cardboard: a comparative analysis of non-wood materials

  • Dhia, Mehdi
  • Aldás-Carrasco, Miguel Fernando
  • Ferri, J.M|||0000-0002-1269-4973
  • López-Martínez, Juan|||0000-0001-6904-2282
  • Pavón-Vargas, Cristina Paola|||0000-0003-2902-0059
[EN] In this study, recycled cardboard sheets were produced by incorporating 30 wt% micronized filler obtained from three biomass residues: artichoke bagasse, Malva arborea (tree mallow) stems, and corn cob. The objective was to evaluate the potential of Malva arborea, introduced here for the first time as a non-wood filler in recycled cardboard, and to compare its performance with two commonly studied agro-residues. Mechanical tests (n = 5 per formulation), conducted under controlled laboratory conditions of 23 degrees C and 50% relative humidity, showed that the incorporation of fillers decreased the tensile strength and stiffness relative to the unfilled control. Tree mallow reduced tensile strength to 56%, while artichoke and corn cob retained 52-55% of the original value. Chemical composition analysis (Chasson-Datta method), which quantifies the structural fractions relevant to pulping behavior (hemicellulose, cellulose, and lignin), revealed that Malva arborea contains high hemicellulose (71.4%) and low lignin (11.9%), contributing to its early thermal degradation observed in TGA. Artichoke bagasse presented the highest cellulose content (23.1%), while corn cob showed the largest lignin fraction (28.2%). FTIR spectra confirmed the presence of characteristic lignocellulosic functional groups. Although Malva arborea exhibited the lowest reinforcement capability due to its fragmented morphology and high hemicellulose content, its low lignin content and ease of processing make it a promising sustainable filler for light-duty recycled cardboard applications. These findings support the valorization of biomass residues as alternative raw materials in circular bio-based packaging., Ministerio de Ciencia e Innovacion,PID2023-152869OB-C22
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Innovative development of injection-molded biodegradable zein blends with xanthan gum

  • Plasencia, Lluis
  • Brdlík, Pavel
  • Montanes, Nestor|||0000-0001-6070-127X
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
[EN] In this work, environmentally friendly materials based on zein, glycerol, and xanthan gum (XG) are developed through the innovative use of extrusion and injection-molding methodologies for this type of bioplastic materials. This methodology has never been applied to thermoplastic zein materials and this approach represents a significant advancement over traditional cast film methods, enabling enhanced control over properties and expanding potential applications thanks to the possibility of producing new geometries. Mechanical properties show that XG increases the stiffness and hardness of the materials, achieving elastic modulus of 1294¿MPa and tensile strengths of 21¿MPa. The thermal stability of the formulations is also enhanced by the addition of XG, which considerably increases the maximum degradation rate temperature from 259 up to 340ºC. The wettability of the materials is assessed by contact angle measurements, which show a very high hydrophilicity (29º), nonetheless, it was decreased to not so extremely low contact angle values thanks to the addition of XG (50º), which is very positive from the point of view of food packaging applications. Finally, all materials proved to be completely disintegrated under controlled compost conditions after 9 weeks of incubation in controlled compost soil conditions, verifying the great environmentally friendly value of these formulations., This research is a part of the grant PID2023-152869OB-C22, and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union "NextGenerationEU"/PRTR.The authors also thank Generalitat CIGE/2023/46 and CIAICO/2023/253, Sports The authors also thank Generalitat Valenciana-GVA, grant number CIGE/2023/46 and CIAICO/2023/253, for supporting this work. Funded with Aid for First Research Projects (PAID-06-22) , Vicerectorate for Research of the Universitat Politecnica de Valencia (UPV) . J. G.-C. wants to thank FPU20/01732 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. This work was supported by the Ministry of Education, Youth, and Sports of the Czech Republic and the European Union-European Structural and Investment Funds in the frames of Operational Program Research, Development, and Education-project Hybrid Materials for Hierarchical Structures (HyHi, Reg. No. CZ.02.1.01/0.0/0.0/16_019/0000843) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhanced properties of methyl hydroxyethyl cellulose films with arabinoxylans-rich extract from brewer&apos, s spent grain

  • Rojas-Lema, S.
  • Mellinas, C.
  • Jiménez, A.
  • Garrigos, M.C.
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Balart, Rafael|||0000-0001-5670-7126
[EN] Environmentally friendly methyl hydroxyethyl cellulose (MHEC)-based films added with different amounts (10-30 wt.%) of an arabinoxylans-rich extract (AxRE) obtained from brewer's spent grain (BSG) were developed by the solvent casting method. Some decrease in mechanical properties of films was shown with increasing AxRE content. Addition of AxRE led to a decrease in tensile strength to 23.0¿33.7 MPa which are typical of commodity plastics used in the packaging industry. AxRE increased the thermal stability of MHEC-based films, as evidenced by a slight increase in melting point observed through differential scanning calorimetry (DSC) together with a delay in the thermodegradation profile obtained by thermogravimetric analysis (TGA), with onset degradation temperatures above 300 °C for all compositions. Additionally, films with AxRE showed higher hydrophobic behavior, increasing water contact angle from 58.6° (neat MHEC) up to 67.8° for films containing 20 wt.%-AxRE and a decreasing in the moisture content of MHEC films (5.6 %) to 4.2 % for films containing 10 wt.%-AxRE. Interestingly, the arabinoxylans-rich extract significantly increased the antioxidant activity of MHEC-based films with values up to 50 % of 2,2-diphenyl-1-picrylhydrazyl (DPPH) inhibition in films with 20 wt.%-AxRE. The obtained films show potential for active packaging, given that they have demonstrated to provide important antioxidant activity., This research is a part of the grants PID2023-152869OB-C21, PID2023-152869OB-C22, PID2020-116496RB-C21, PID2020-116496RB-C22, and TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union "NextGener-ationEU"/PRTR. The authors also thank Generalitat Valenciana-GVA, grant numbers CIGE/2023/46, and CIAICO/2023/253, for supporting this work. S.R.-L. acknowledges the Santiago Grisolia grant from Generalitat Valenciana (GVA) (GRISOLIAP/2019/132) . Microscopy Services at UPV are also acknowledged for their support in collecting and analyzing FESEM images.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Plastics from end-of-life vehicles: material insights to support circular economy-oriented recycling strategies

  • Vazquez, Yamila Victoria
  • Pavón-Vargas, Cristina Paola|||0000-0003-2902-0059
  • Samper, María-Dolores|||0000-0002-5102-8412
  • López-Martínez, Juan|||0000-0001-6904-2282
[EN] Plastic waste from End-of-Life Vehicles (ELVs) represents a growing challenge for sustainable waste management due to its complex composition, presence of additives, and variable recyclability. This study presents a detailed characterization of two representative plastic fractions from ELV components using spectroscopic, thermal, morphological, and rheological analyses. The main polymeric systems identified were polycarbonate-polybutylene terephthalate (PC/PBT) and polycarbonate-polyethylene terephthalate (PC/PET), both containing mineral fillers such as talc, quartz, clays, and titanium dioxide. These fillers were confirmed by thermogravimetric analysis, X-ray diffraction, and electron microscopy, and shown to influence degradation patterns and material morphology. Significant differences in melt flow behavior and structural features were observed between the two fractions, indicating distinct processing responses and recyclability profiles. These findings provide a critical foundation for designing efficient mechanical recycling and upcycling strategies for ELV plastics, directly supporting the development of a circular economy in the automotive sector. The methodology presented is transferable to other complex post-consumer waste streams, supporting broader circular economy goals through improved material traceability and resource efficiency., This research was funded by MCIN/AEI/https://doi.org/10.13039/501100011033 through grant PID2023-152869OB-C22 by the European Union NextGenerationEU /PRTR and PID-AEI Project (grant PID2021-123753NA-C33) and ERDF A way of making Europe by the European Union.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimization of the ductile properties of poly(lactic acid) (PLA) using green citrate-based plasticizers and itaconic anhydride grafted PLA (PLA-g-IA)

  • Lázaro-Hernández, C.|||0009-0002-8250-9363
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Sanchez-Nacher, Lourdes|||0000-0002-8627-4576
  • Boronat, Teodomiro|||0000-0002-2144-2874
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Valerga, Ana P.
[EN] This study investigates the production of poly(lactic acid) (PLA) formulations enhanced with natural plasticizers such as triethyl citrate (TEC) and trihexyl o-butyrate citrate (BTHC). Itaconic anhydride (IA) grafted with PLA (PLA-g-IA) was obtained via reactive extrusion to serve as a compatibilizer. The incorporation of plasticizers notably enhanced the ductility of PLA while simultaneously decreasing its ultimate tensile strength and elastic modulus. Among the plasticizers tested, TEC was more effective in enhancing ductility and energy absorption, as evidenced by increased impact resistance in Charpy tests. The addition of PLA-g-IA further improved the mechanical strength of the plasticized samples without sacrificing ductility. This enhancement is attributed to the higher reactivity of BTHC with itaconic anhydride (IA) groups. The addition of plasticizers lowered the glass transition temperature from 59.6 ºC to as low as 26.6 ºC, increasing chain mobility even at room temperature. Changes in chain mobility were also observed in the thermomechanical properties, resulting in a rubbery state under ambient conditions. Higher plasticizer content improved the speed of recovery immediately after activation. Morphological analyses supported these findings, confirming that combining PLA with natural plasticizers and utilizing PLA-g-IA can effectively tailor material properties. This approach offers a simplified processing method while enhancing performance., This research is a part of the grant PID2023-152869OB-C22, and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union "NextGenerationEU"/PRTR. The authors also thank Generalitat Valenciana-GVA, grant number CIGE/2023/46 and CIAICO/2023/253, for supporting this work. J. Ivorra-Martinez thanks Generalitat Valenciana-GVA for funding a postdoc position through the CIAPOS program co-funded by ESF Investing in your future, grant number CIAPOS/2023/362. Microscopy services at UPV are also acknowledged for their help in collecting and analyzing FESEM images. C. Lazaro-Hdez thanks Generalitat Valenciana-GVA for funding a predoc position through the CIACIF program co-funded by ESF Investing in your future, grant number CIACIF/2023/244.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Environmentally Friendly Alternatives to Bis(2-ethylhexyl) Phthalate as Plasticizers for Poly(lactic acid)

  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Vicente-Vinas, Maria del Puig|||0009-0005-0024-1503
  • Garcia-Sanoguera, David|||0000-0002-1923-9519
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Covas, José A.
[EN] This study evaluated a conventional petroleum derived diester plasticizer and three environmentally friendly diester plasticizers for polylactic acid (PLA), focusing on processing, mechanical, thermal, chemical, and surface properties. Bis(2-ethylhexyl) phthalate (DEHP), a widely used plasticizer for PLA, is derived from petrochemical sources and is classified as a pollutant, which motivated the search for biobased alternatives. PLA compounds containing biobased diester plasticizers were prepared by extrusion, and test specimens were obtained by injection molding. The results showed that the biobased plasticizers bis(2-ethylhexyl) maleate (DEHM) and bis(2-ethylhexyl) sebacate (DEHS) significantly improved ductility, which was confirmed by fracture surface analysis. Thermal and thermomechanical analyses indicated enhanced chain mobility, along with increased crystallization and a reduction in glass transition temperature. Chemical characterization confirmed that plasticization occurred through physical interactions, preserving the chemical integrity of the polymer matrix. In addition, diester plasticizer incorporation modified surface wettability, facilitating water diffusion and increasing affinity toward distilled water, which could be beneficial for applications such as biodegradable packaging or agricultural materials, where moisture interaction may influence end-of-life behavior and environmental degradation., This research is a part of the grant PID2023-152869OBC22, and the grant TED2021-131762 A-I00, funded by MCIN/AEI/ https://doi.org/10.13039/501100011033 and by the European Union NextGenerationEU /PRTR. The authors also thank Generalitat Valenciana - GVA, grant number CIGE/2023/46 and CIAICO/2023/253, for supporting this work. Funding for open access charge: CRUEUniversitat Politècnica de València. Microscopy services at UPV are also acknowledged for their help in collecting and analyzing FESEM images. J. Ivorra-Martinez wants to thank for the grant Grant JDC2024-053063-I funded by MICIU/AEI /https://doi.org/10.13039/5 01100011033 and by the FSE+. J. Gomez-Caturla wants to thank for the grant JDC2024-053152-I funded by MICIU/AEI /https://doi.org/10.13039/501100011033 and by the FSE+. Funding for open access charge: CRUE Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ethylene brassylate as a biobased plasticizer for poly(lactic acid): Evaluation of mechanical, thermal, and biodegradation properties

  • Escriva-Faus, M.
  • Lascano-Aimacaña, Diego Sebastián|||0000-0002-0996-1946
  • Mario Nicolás
  • Lázaro-Hernández, C.|||0009-0002-8250-9363
  • Sanchez-Nacher, Lourdes|||0000-0002-8627-4576
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
[EN] Poly(lactic acid) (PLA) is a bio-based polymer with high potential; however, its inherent brittleness restricts its practical applications. This work evaluates ethylene brassylate (EB), a macrocyclic diester of natural origin, as a plasticizer for PLA at 5¿20 wt%. Thermal analysis confirmed a plasticizing effect, with the glass transition temperature decreasing from 59.9 °C in neat PLA to 38.0 °C in PLA-20 EB. Mechanical tests showed that 20 wt% EB increased elongation at break from 10 % (neat PLA) to over 460 % and improved impact resistance by ~70 %. Furthermore, moisture resistance was preserved, and microscopy confirmed good miscibility with no phase separation. Under composting, degradation occurs more rapidly in proportion to EB content, reaching ~90 % mass loss after four weeks. Migration tests revealed values below 40 mg kg¿1 for PLA-EB < 10 wt% EB, whereas PLA-15 EB reached the regulatory limit. EB is therefore an efficient bio-based plasticizer for PLA, offering enhanced ductility, toughness, and biodegradation, with promising applications in sustainable packaging, especially for refrigerated and cold-chain storage., This research is a part of the grant PID2023-152869OB-C22, and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/ 501100011033 and by the European Union NextGenerationEU /PRTR. The authors also thank Generalitat Valenciana - GVA, grant number CIGE/2023/46 and CIAICO/2023/253, for supporting this work. Microscopy services at UPV are also acknowledged for their help in collecting and analyzing FESEM images. D.L. thanks Generalitat Valenciana - GVA for funding a postdoc position through the CIAPOS program cofunded by ESF Investing in your future, grant number CIAPOS/2022/140. C. Lazaro-Hdez thanks Generalitat Valenciana - GVA for funding a predoc position through the CIACIF program co-funded by ESF Investing in your future, grant number CIACIF/2023/244. M. Miranda-Pinzon thanks the Vice-rectorate for Research of the Universitat Politecnica de Valencia (UPV) for funding a predoctoral contract in the PAID-01-24 program. Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Solvent-Free Synthesis of Poly(lactic acid) by Reactive Extrusion: Role of a-Tocopherol and Catalyst Loading

  • Mario Nicolás
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Balart, Rafael|||0000-0001-5670-7126
  • Jiménez, Alfonso
  • Garrigós, María Carmen
  • Marset, Xavier
[EN] Poly(lactic acid) (PLA) was synthesized by ring-opening polymerization (ROP) of l-lactide through reactive extrusion using Sn(Oct)2 as the catalyst, 1-dodecanol as the initiator, and ¿-tocopherol as a natural antioxidant. This work combined reaction-time monitoring with structure¿property analysis to define the optimum processing window and formulation. In the first stage, samples collected during reactive extrusion were analyzed by differential scanning calorimetry (DSC) and Fourier-transform infrared (FTIR), showing the progressive consumption of l-lactide and the formation of PLA. The main monomer-related signals disappeared after approximately 12 min, while the most favorable thermal response was obtained after 18 min, indicating an optimum balance between conversion and thermal exposure. In the second stage, the effects of ¿-tocopherol and catalyst:monomer ratio were evaluated by mechanical, thermal, colorimetric, gel permeation chromatography (GPC), and FTIR analyses. For the 1:1000 formulation, ¿-tocopherol increased the molecular weight to 30,926 g mol¿1 and the tensile strength to 34.1 MPa while also enhancing crystallinity and preserving a lighter, less yellow appearance. Among the antioxidant-containing samples, the 1:1000 catalyst:monomer ratio provided the best overall balance between conversion, molecular weight, mechanical performance, and thermal behavior. FTIR confirmed successful PLA formation in the optimized formulations, whereas the 1:5000 sample retained lactide-related bands, consistent with incomplete conversion and inferior properties. These results demonstrate that reactive extrusion is a viable solvent-free route for PLA synthesis when residence time, natural antioxidant stabilization, and catalyst loading are jointly optimized., This research is a part of the grants PID2023-152869OB-C21, PID2023-152869OB-C22, and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union "NextGenerationEU"/PRTR. The authors also thank Generalitat Valenciana - GVA, grant number CIGE/2023/46 and CIAICO/2023/253J. Gomez-Caturla wants to thank for the grant JDC2024-053152-I funded by MCIN/AEI/ 10.13039/501100011033 and, as appropriate, by "ESF Investing in your future" or by "European Union NextGenerationEU/PRTR".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tuning polylactic acid performance using green citrate plasticizers of varying chain lengths

  • Lázaro-Hernández, C.|||0009-0002-8250-9363
  • Fenollar, Octavio|||0000-0003-4323-7414
  • Garcia-Sanoguera, David|||0000-0002-1923-9519
  • Boronat, Teodomiro|||0000-0002-2144-2874
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Stefani, Pablo M.
[EN] The addition of these plasticizers increases the chain mobility of PLA, enhancing its deformability while reducing both tensile strength and elastic modulus. Mechanical testing identified TEC at 20 wt% as the most effective formulation, achieving an elongation of 307 % and a reduction in tensile strength from 70.6 MPa (PLA) to 25.2 MPa. Formulations containing 10 wt% exhibited anti-plasticization effects, with a slight reduction in elongation from 3.4 % to 3.2 %. Thermal and thermomechanical analyses corroborated the plasticizing effect, demonstrating a decrease in glass transition temperature from 59.6 °C to 19.3 °C, which indicates sufficient chain mobility to attain a rubber-like state at room temperature. Enhanced mobility also promoted crystallization by modifying nucleation behavior, altering crystal growth dimensionality, and reducing the activation energy required. Shape memory characterization revealed a rapid initial recovery in plasticized samples; however, total recovery diminished at higher plasticizer contents near 20 %, while lower concentrations exhibited recovery rates close to 90 %. Due to their low molecular weight of the plasticizers, migration is anticipated, resulting in measurable weight loss when exposed to food simulants. This migration phenomenon is associated with an increase in free volume, which also contributes to the improved ductile properties observed in plasticized PLA., This research is a part of the grant PID2023-152869OB-C22, and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU /PRTR. The authors also thank Generalitat Valenciana - GVA, grant number CIGE/2023/46 and CIAICO/2023/253, for supporting this work. C. Lazaro-Hdez thanks Generalitat Valenciana - GVA for funding a predoc position through the CIACIF program co-funded by ESF Investing in your future, grant number CIACIF/2023/244. J. Ivorra-Martinez thanks Generalitat Valenciana - GVA for funding a postdoc position through the CIAPOS program co-funded by ESF Investing in your future, grant number CIAPOS/2023/362. Microscopy services at UPV are also acknowledged for their help in collecting and analyzing FESEM images. Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design and Characterization of Sustainable PLA-Based Systems Modified with a Rosin-Derived Resin: Structure-Property Relationships and Functional Performance

  • Rosa-Ramírez, Harrison de la|||0000-0002-2913-7938
  • Pavón-Vargas, Cristina Paola|||0000-0003-2902-0059
  • López-Martínez, Juan|||0000-0001-6904-2282
  • Samper, María-Dolores|||0000-0002-5102-8412
  • Aldás-Carrasco, Miguel Fernando
  • Dominici, F.
  • Rallini, Marco
  • Puglia, Debora
  • Torre, Luigi
[EN] The design of sustainable polymer systems with tunable properties is essential for next-generation functional materials. This study examines the influence of a phenol-free modified rosin resin (Unik Print¿ 3340, UP)¿a maleic anhydride- and fumaric acid-modified gum rosin¿on the structural, thermal, rheological, and mechanical behavior of four poly(lactic acid) (PLA) grades with different molecular weights and crystallinity. Blends containing 3 phr of UP were prepared by melt compounding. Thermogravimetric analysis showed that the incorporation of UP did not alter the thermal degradation of PLA, confirming stability retention. In contrast, differential scanning calorimetry revealed that UP affected thermal transitions, suppressing crystallization and melting in amorphous PLA grades and shifting the crystallization temperature to lower values in semi-crystalline grades. The degree of crystallinity decreased for low-molecular-weight semi-crystalline PLA but slightly increased in higher-molecular-weight samples. Mechanical tests indicated that UP acted as a physical modifier, increasing toughness by over 25% for all PLA grades and up to 60% in the amorphous, low-molecular-weight grade. Rheological measurements revealed moderate viscosity variations, while FESEM analysis confirmed microstructural features consistent with improved ductility. Overall, UP resin enables fine tuning of the structure¿property relationships of PLA without compromising stability, offering a sustainable route for developing bio-based polymer systems with enhanced mechanical performance and potential use in future biomimetic material designs., This research was funded by MCIN/AEI/10.13039/501100011033 through grant PID2023- 152869OB-C22 by the European Union NextGenerationEU /PRTR and PID-AEI Project (grant PID2024-157368NB-C33) and ERDF A way of making Europe by the European Union.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multimaterial PLA with tailored plasticization using fused deposition modeling for improved flexibility and shape memory recovery

  • Lázaro-Hernández, C.|||0009-0002-8250-9363
  • Sanchez-Nacher, Lourdes|||0000-0002-8627-4576
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Boronat, Teodomiro|||0000-0002-2144-2874
  • Valerga Puerta, Ana Pilar
[EN] Purpose The purpose of this study is to develop and characterize high-performance, biodegradable polylactic acid (PLA)-based materials for advanced applications that demand increased flexibility and shape memory capabilities. By introducing triethyl citrate (TEC) as a plasticizer and leveraging multimaterial three-dimensional printing configurations, this research aimed to mitigate PLA¿s inherent brittleness and expand its functional range. Additionally, this work sought to optimize design parameters ¿ such as infill orientation and core-shell distribution ¿ to maximize mechanical strength, fracture toughness and shape recovery. Ultimately, this study aspired to broaden PLA¿s applicability in fields like biomedical devices, packaging and engineered components. Design/methodology/approach This study used fused deposition modeling to fabricate single-material and multimaterial (core-shell) samples using PLA blended with TEC at varying concentrations (0¿20 Wt%). Filaments were first compounded and then extruded into 1.75 mm diameter feedstocks. Mechanical properties were evaluated through tensile, flexural and impact tests, while shape memory behavior was quantified by bending-deformation and recovery experiments in heated water. Morphological analyses examined void formation and fracture surfaces via field emission scanning electron microscopy. Thermal transitions and melt flow indices were also characterized to elucidate the influence of plasticizer content. Findings The results of this study demonstrated that adding 20 Wt% TEC significantly enhanced elongation at break up to 174% compared to neat PLA with an elongation at break close to 2%. Plasticizer lowered the glass transition temperature from 62°C of neat PLA to around 30°C. Shape memory recovery rate above 80% in core-shell configurations was obtained, while neat PLA exhibited recovery rates around 60%. Multimaterial samples featuring soft cores and rigid shells exhibited balanced stiffness, superior impact energy absorption and more efficient shape recovery than homogeneous counterparts. Improved melt flow indices facilitated better layer adhesion, reducing voids and increasing overall part integrity. These findings underline the potential of combining plasticized PLA and careful material distribution in additive manufacturing applications. Originality/value This work provides a novel demonstration of how tailored plasticization and multimaterial three-dimensional printing can collectively expand the utility of PLA, bridging the gap between traditional rigidity and the demand for flexible, shape memory-enabled structures. By systematically studying both single-material and core-shell specimens, this research offers key insights into harnessing polymer chain mobility while preserving mechanical strength. In contrast to prior efforts focusing on either plasticization or complex geometries alone, this integrated approach presents a versatile design strategy that can be applied to a wide spectrum of engineering and biomedical solutions., This research is a part of the grant PID2023-152869OB-C22 and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union "NextGenerationEU"/PRTR. The authors also thank Generalitat Valenciana-GVA, grant number CIGE/2023/46 and CIAICO/2023/253, for supporting this work. GVA for funding a postdoc position through the CIAPOS program co-funded by ESF Investing in your future, grant number CIAPOS/2023/362. Microscopy services at UPV are also acknowledged for their help in collecting and analyzing field emission scanning electron microscopy images. GVA for funding a predoc position through the CIACIF program co-funded by ESF Investing in your future, grant number CIACIF/2023/244.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Comparative Experimental Raman, DFT, and Chemometric Characterization of Selected Phenolic Acids: Structural and Environmental Contributions to the Vibrational Response

  • Palomo, Jose Alfonso Prieto
  • Hernandez Fernandez, Joaquin Alejandro
  • López-Martínez, Juan|||0000-0001-6904-2282
[EN] Phenolic acids exhibit structure-dependent vibrational responses governed by aromatic substitution, pi-conjugation, oxygenated functional groups, and molecular environment. In this work, p-coumaric, caffeic, trans-ferulic, and gallic acids were investigated through an integrated experimental Raman, density functional theory (DFT), and chemometric approach to establish molecular relationships between hydroxylation, methoxylation, conjugation, and Raman spectral behavior. Raman spectra were recorded in the solid state and in an ethanol/water (1:1, v/v) mixture. At the same time, DFT calculations were used to optimize the molecular structures, simulate Raman spectra, assign vibrational modes, and evaluate molecular electrostatic potential, frontier orbitals, electronic descriptors, and localized orbital locator maps. The solid-state Raman spectra provided the most resolved molecular fingerprints, with hydroxycinnamic acids exhibiting intense bands corresponding to aromatic and conjugated nu(C=C) modes. In contrast, gallic acid displayed a distinct hydroxybenzoic vibrational pattern dominated by phenolic C-O/O-H and carboxylic contributions. DFT-assisted assignments confirmed that the main spectral differences arise from coupled vibrations involving nu(C=C), nu(C=O), nu(C-O), delta(O-H), aromatic ring deformations, and methoxy-related modes. Molecular electrostatic potential (MEP) and localized orbital locator (LOL) analyses showed that oxygen-centered regions are the most electrostatically and electronically localized sites, thereby explaining the sensitivity of C-O, O-H, and C=O bands to solvent-mediated interactions. HOMO-LUMO analysis revealed extended frontier-orbital delocalization in hydroxycinnamic acids, in contrast to the more localized hydroxybenzoic electronic structure of gallic acid. Principal component analysis confirmed that solid-state Raman spectra provide stronger chemometric discrimination than solution spectra, with PC1 and PC2 explaining 79.0% of the total variance in the solid-state dataset. Overall, the results show that specific functional groups define the principal vibrational domains of the studied phenolic acids. In contrast, the exact band positions, relative intensities, and coupling patterns are additionally modulated by aromatic substitution, pi-conjugation, electronic distribution, physical state, and molecular environment. Within the limitations of a single-conformer isolated-molecule model, the combined Raman-DFT-chemometric approach provides a comparative interpretation of the vibrational fingerprints of the four selected compounds., This research was funded by MCIN/AEI/10.13039/501100011033 through grant PID2023-152869OB-C22.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of intelligent halochromic packaging films based on zein and pH-sensitive enocyanins for evaluating the fish freshness

  • Llinares-Verdu, A.
  • Peltzer, M.
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Fenollar, Octavio|||0000-0003-4323-7414
  • Balart, Rafael|||0000-0001-5670-7126
[EN] This work reports on the development of halochromic pH-sensitive films based on zein, glycerol and enocyanin extract. Enocyanins improve the mechanical properties of the zein films, increasing tensile strength from 6.8 to 13.9 MPa. Thermal stability of zein films was not affected by the addition of enocyanins, with a maximum degradation rate temperature of 330¿345 ºC. All films present certain capacity to change their color with pH. Films were exposed to ammonia and their color changed from brownish to green-blue colors, indicating pH-variation. In-vivo tests with hake fish demonstrate that after 8 days of exposure, when the fish become spoiled, films change their color to green-blue tonalities as a result of a more alkaline pH environment. Total color change is more pronounced in the films with higher composition of enocyanins, proving their great applicability in the food industry as freshness non-destructive and non-toxic indicators. Enocyanins increased the affinity of the films for water up to a point, with a minimum contact angle of 29.5º. Films were transparent and FTIR measurements suggested that enocyanins form strong hydrogen bonds with zein, This research is a part of the grant PID2023-152869OB-C22, and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union "NextGenerationEU"/PRTR. The authors also thank Generalitat Valenciana-GVA, grant number CIGE/2023/46 and CIAICO/2023/253, for supporting this work. Funded with Aid for First Research Projects (PAID-06-22) , Vice-rectorate for Research of the Universitat Politecnica de Valencia (UPV) . Finally, the authors thanks to the Agencia Nacional de Promocion Cientifca y Tecnoloica (Argentina) through PICT-2021-0092 and the National University of Quilmes (UNQ, Argentina) through R&D program PUNQ R 990/19 Expte: 827-1300/19. Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Operational Domains Governing Melt Flow Index Variability in Industrial Polypropylene Production

  • Hernandez-Fernandez, Joaquin
  • López-Martínez, Juan|||0000-0001-6904-2282
[EN] Maintaining a stable melt flow index (MFI) is a critical objective in industrial polypropylene production because MFI directly reflects polymer molecular weight and strongly influences downstream processing performance. Although the effects of catalyst formulation and hydrogen concentration on polypropylene properties are well established, the operational origins of residual fluctuations in MFI under highly stable industrial conditions remain poorly understood. In this work, the relationships between feedstock quality, process operation, and residual MFI variability were investigated during the production of a commercial polypropylene grade in an industrial gas-phase reactor. A dataset comprising 61 industrial observations was assembled by integrating laboratory quality measurements with operational variables related to hydrogen concentration, catalyst management, reactor hydrodynamics, thermal behavior, productivity, and fouling. In parallel, the concentrations of key catalyst inhibitors, including carbon oxides, sulfur compounds, water, oxygen, acetylene, methylacetylene, propadiene, arsine, and phosphine, were quantified before and after the use of a modified zeolite-based purification system. The purification process reduced catalyst poisons to ppb levels, producing polymer-grade propylene with monomer purity exceeding 99.95 wt.%. Under these highly controlled conditions, the production campaign exhibited remarkable quality stability, with an average MFI of 3.03 g/10 min and a coefficient of variation of only 6.63%. Principal component analysis revealed that two dominant operational domains could describe 86.49% of the total process variability. The first domain was associated with reactor hydrodynamics, fouling behavior, and thermal conditions, whereas the second domain was governed by catalyst-system variables and hydrogen-mediated chain-transfer mechanisms. Variable importance in projection analysis identified Plate Fouling Factor (VIP = 2.17), Production Rate (VIP = 1.33), and H2/C3 Ratio (VIP = 1.17) as the variables most strongly associated with residual MFI fluctuations. The results demonstrate that once feedstock-related disturbances are effectively minimized, residual MFI variability arises from interactions among the hydrodynamic, thermal, and catalytic operational domains rather than from a single controlling parameter. These findings provide new insights into process-quality relationships in industrial polypropylene manufacturing and establish a practical framework for identifying the operational origins of subtle fluctuations in polymer quality in highly stabilized production systems., This research was funded by MCIN/AEI/10.13039/501100011033 through grant PID2023-152869OB-C22.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High efficiency plasticizers for flexible thermoplastic zein processed by extrusion and injection molding

  • Benavides-Ramos, A.
  • Lázaro-Hernández, C.|||0009-0002-8250-9363
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Lascano-Aimacaña, Diego Sebastián|||0000-0002-0996-1946
  • Balart, Rafael|||0000-0001-5670-7126
[EN] This study addresses the limited availability of injection-molded zein systems by evaluating three structurally contrasted plasticizers, diethylene glycol (DEG), dipropylene glycol (DPG), and diethanolamine (DEA), to produce thermoplastic zein by hot extrusion and injection molding. Beyond demonstrating melt processability, the work seeks to clarify how plasticizer chemistry governs the structure-property relationships of zein under scalable thermoplastic processing conditions. All formulations yielded homogeneous injection-molded specimens. FTIR and XRD revealed plasticizer-dependent perturbations in the protein matrix, while DSC and DMTA showed clear differences in thermomechanical softening. The linear and flexible structure of DEG promoted the strongest disruption/reorganization of zein packing, increasing molecular mobility and translating into the lowest glass transition temperature (Tg) (42.0 ºC for 25 DEG), highest ductility (elongations at break: 74.2%) and highest impact strength (~70¿kJ¿m¿2). In contrast, the branched structure of DPG and the amino-diol character of DEA produced more moderate plasticization, retaining higher stiffness and Tg values, while DEA strongly increased surface wettability (WCA< 10º). Bulk water uptake reached high maxima (~277¿310% at 7 days). Under controlled composting, near-complete disintegration occurred within 4¿6 weeks (20DPG slowest). Overall, plasticizer chemistry enables the injection molding of tunable zein parts with short composting disintegration times., This research was supported by grants PID2023 152869OB-C22 and TED2021 131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU /PRTR. D. Lascano acknowledges grant JDC2023 051885-I funded by MCIN/AEI/10.13039/501100011033 and by the ESF + . J. Gomez-Caturla wants to thank for the grant JDC2024 053152-I funded by MCIN/AEI/ 10.13039/501100011033 and, as appropriate, by ESF Investing in your future The authors also acknowledge the Generalitat Valenciana (GVA) for supporting this work through grants CIGE/2023/46 andCIAICO/2023/253. C. L¿ azaro-Hdez gratefully acknowledges the Generalitat Valenciana for funding a predoctoral position through the CIACIF program co-funded by the ESF Investing in your future (grantCIACIF/2023/244). Funding for open access charge: CRUE Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Innovative development and characterization of thermoplastic zein-based biopolymers for food packaging via injection molding

  • Lluis Plasencia
  • Marina P. Arrieta
  • Lázaro-Hernández, C.|||0009-0002-8250-9363
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
[EN] This study focuses on the development of biodegradable polymers using zein (ZEI) plasticized with glycerol (GLY) and urea (UREA), with the goal of replacing conventional plastics in food packaging. The optimized combination of glycerol and urea in zein formulations significantly enhances mechanical properties: ZEI-15GLY-10UREA formulation achieves a maximum tensile strength of 21.3 MPa. Elongation at break is higher in blends with lower urea content, reaching 9.1% in ZEI-20GLY-5UREA. Conversely, formulations with higher urea content exhibit reduced elongation and toughness, evident in the decrease to 1.8 kJ/m2 of impact energy in ZEI-25UREA. Samples show Shore D hardness values up to 82.0. Morphological characterization confirms consistent behavior with mechanical properties, indicating that the glycerol and urea combination promotes a more ductile structure. Incorporation of these plasticizers lowers the glass transition temperature of the compounds from 53.8 °C in ZEI-25GLY to between 48 °C and 49 °C in formulations with 5% and 10% urea. All formulations exhibit biodegradation behaviour, with all of them achieving complete degradation in the final weeks. In all cases, there is a clear trend of mass loss during the first 6 weeks, with all formulations losing more than 80% of their initial mass., This research is a part of the grant PID2023-152869OB-C22, funded by MCIN/AEI/10.13039/501100011033 and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU /PRTR. Authors also thank Generalitat Valenciana-GVA for funding this research through the grant numbers CIAICO/2023/253 and CIGE/2023/46. Funded with Aid for First Research Projects (PAID-06-22), Vice-rectorate for Research of the Universitat Politecnica de Valencia (UPV). J. G.-C. wants to thank FPU20/01732 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Material Performance and Processing Behavior of Polyolefin Waste in Mechanical Recycling

  • Vazquez, Yamila V.
  • Miguel Guillem, Juan Vicente
  • Pavón-Vargas, Cristina Paola|||0000-0003-2902-0059
  • López-Martínez, Juan|||0000-0001-6904-2282
  • Samper, María-Dolores|||0000-0002-5102-8412
[EN] This study investigates the processability and performance limits of high-density polyethylene (HDPE) recovered from mixed polyolefin waste under realistic mechanical recycling conditions. The waste stream was processed by extrusion and injection molding, with parameters actively adapted. ATR-FTIR and DSC analysis confirmed HDPE as the matrix, contaminated with minor fractions of polypropylene (PP), PET, and polyurethane (PU). The reprocessed material exhibited a single melting peak at 132 degrees C and a melt flow rate (MFR) of 9.9 +/- 0.6 g 10 min-1, indicative of moderate degradation. Mechanical testing revealed reduced tensile strength and elongation at break compared to virgin HDPE, indicating compositional heterogeneity and poor interfacial adhesion. Field emission scanning electron microscopy (FESEM) revealed dispersed inclusions and microvoids acting as stress concentrators, consistent with reduced ductility. Crucially, progressive reduction of back pressure during processing optimization was essential for stabilizing melt flow and minimizing shear-induced degradation. This adjustment enabled consistent mold filling despite the material's variability. The results demonstrate that mixed HDPE waste can be successfully valorized for non-structural applications such as plastic lumber or pallets, providing a sustainable pathway for recycling heterogeneous streams without costly pre-treatment or compatibilization., This research was funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU /PRTR through the grant PID2023-152869OB-C22 and PID2024- 157368NB-C33, and by MCIN/AEI/10.13039/501100011033 through the TED-AEI Project (grant TED2021-129920A-C43) and ERDF A way of making Europe .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhancing Polylactic Acid Films With Polyethylene Glycol-Based Plasticizers: A Reactive Extrusion Approach

  • Lázaro-Hernández, C.|||0009-0002-8250-9363
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Boronat, Teodomiro|||0000-0002-2144-2874
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Arrieta, Marina P.
[EN] The enhancement of polylactic acid (PLA) films using polyethylene glycol (PEG)-based plasticizers through reactive extrusion, employing dicumyl peroxide (DCP) as a cross-linking agent is studied in this work. Incorporating PEG plasticizers into PLA substantially raises its elongation at break, from 12.0% in neat PLA to 61.3%, while preserving satisfactory tensile strength. This improvement broadens the industrial applicability of PLA; however, it should be noted that the plasticizers exhibit a tendency to migrate. The reactive extrusion process reduces plasticizer migration, lowering values from 140.3 mg kg¿1 in PLA-PEG films to 40.8 mg kg¿1 in films processed with reactive extrusion (PLA-PEG-R). This substantial reduction enables the safe use of these materials in food-contact applications. Thermal stability is also enhanced, with degradation temperatures rising from 268.7 °C in PLA-PEG to 333.8 °C in PLA-DCP systems. Additionally, the glass transition temperature (Tg) decreases to 38.3 °C, enhancing material ductility. The films retain certain transparency despite slight alterations in optical properties, and their increased water vapor permeability can be beneficial for applications in food packaging applications. These findings demonstrate that reactive extrusion (REX) with PEG-based plasticizers improves PLA's mechanical, thermal, and functional properties, broadening its industrial application while preserving its environmental advantages., This research is a part of the grant PID2023-152869OB-C22, and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union "NextGenerationEU"/PRTR. The authors also thank Generalitat Valenciana - GVA, grant number CIGE/2023/46 and CIAICO/2023/253, for supporting this work. J. Ivorra-Martinez thanks Generalitat Valenciana - GVA for funding a postdoc position through the CIAPOS program co-funded by ESF Investing in your future, grant number CIAPOS/2023/362. Microscopy services at UPV are also acknowledged for their help in collecting and analyzing FESEM images. C. Lazaro-Hdez thanks Generalitat Valenciana - GVA for funding a predoc position through the CIACIF program co-funded by ESF Investing in your future, grant number CIACIF/2023/244.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The effect of plasticizers on properties of thermoplastic rice protein processed by extrusion and injection molding

  • Peñafiel-Alvarado, J.I.
  • Stefani, P.M.
  • Mario Nicolás
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Balart, Rafael|||0000-0001-5670-7126
[EN] The manufacturing of rice protein (RP) thermoplastic materials by combining it with urea, glycerol, sorbitol and xylitol by extrusion and injection molding techniques are studied in this work. Very promising protein-based sustainable polymeric materials are obtained, with tensile strength superior to 17 MPa in the case of samples plasticized with urea, which allows to obtain very rigid materials. On the other hand, the combination of RP and urea with glycerol, sorbitol or xylitol gives rise to materials with elongation at breaks superior to 40 %. This means a wide range of properties depending on the combination of plasticizers used. Urea crystals finely embedded in the RP matrix are observed by microscopy analysis, which are confirmed by the presence of a melting peak in DSC at approximately 127 °C. Chemical analysis also revealed the predominance of these urea crystals through chemical analysis. Dynamic-mechanical thermal analysis (DMTA) also showed the glass transition temperature (Tg) of the materials to be between 28 and 60 °C, being the sample with glycerol the one with the lowest value. All materials were observed to be completely biodegradable at 3¿4 weeks, gaining increasing environmentally friendly value. The plenty availability of rice protein makes these materials very attractive for producing environmentally friendly materials with great potential in the food industry., This research is a part of the grant PID2023-152869OB-C22, and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU /PRTR. The authors also thank Generalitat Valenciana - GVA, grant number CIGE/2023/46 and CIAICO/2023/253, for supporting this work. Funded with Aid for First Research Projects (PAID-06-22), Vice-rectorate for Research of the Universitat Polit`ecnica de Val`encia (UPV). J. G.-C. wants to thank FPU20/01732 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. J. Ivorra-Martinez thanks Generalitat Valenciana - GVA for funding a postdoc position through the CIAPOS program co-funded by ESF Investing in your future, grant number CIAPOS/2023/362. M. Miranda-Pinzon thanks Vicerectorate for Research of the Universitat Polit`ecnica de Val`encia (UPV) for funding a predoctoral contract in the PAID-01-24 program. Microscopy services at UPV are also acknowledged for by their help in collecting and analyzing FESEM images. Funding for open access charge: CRUE-Universitat Polit`ecnica de Val`encia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Incorporation of Apricot Shell Loads into Novel Highly Ductile Thermoplastic Zein Biopolymers Through Injection Molding for Food Packaging

  • Peñafiel-Alvarado, Jorge Israel
  • Novak, Jan
  • Brdlík, Pavel
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Balart, Rafael|||0000-0001-5670-7126
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
[EN] The replacement of petroleum-based plastics with sustainable, biodegradable alternatives is a key challenge in the transition toward a circular economy. Zein, a maize-derived protein, is a promising candidate for biodegradable thermoplastics, but its limited ductility and processability have hindered wider adoption. This study addresses this gap by exploring the effect of apricot shell flour (ASF) on zein (ZEI) thermoplastic materials plasticized with 25 wt% diethylene glycol (DEG) and processed by extrusion and injection molding. To date, the use of DEG as a plasticizer for zein in thermoplastics and the incorporation of ASF as a synergistic filler¿plasticizer in such systems have not been reported, defining the novelty of this work. Mechanical analysis revealed an outstanding ductility. ZEI-DEG exhibited a strain at break of 57.2%, which was increased to 119.2% with 15% ASF, while impact strength rose from 6.4 to 15.9 kJ/m², confirming a synergistic plasticization effect between DEG and ASF. A decrease in glass transition was observed by dynamic mechanical thermal analysis with the incorporation of ASF, probably due to the interaction of uronic acids present in ASF with DEG and zein through hydrogen bonding. Morphology analysis showed good filler dispersion and good compatibility with the zein matrix. Thermogravimetric analysis (TGA) revealed a slight decrease in thermal stability with ASF, but materials remained stable up to 350 °C. Materials exhibited a progressive darkening with dark brown colors, providing a wood-like appearance that is potentially attractive for sustainable wood plastic composite applications such as packaging. The properties of these materials were far higher than the traditionally glycerol-plasticized zein materials. Overall, these findings highlight ASF as a promising bio-based filler that enhances flexibility and toughness of thermoplastic zein while maintaining good thermal behavior and creating aesthetically appealing natural composites. These green materials offer significant potential for biodegradable food packaging, furniture, and interior design products., This research is a part of the grant PID2023-152869OB-C22, and the grant TED2021-131762 A-I00, funded by MCIN/AEI/https://doi.org/10.13039/501100011033 and by the European Union NextGenerationEU /PRTR. The authors also thank Generalitat Valenciana - GVA, grant number CIGE/2023/46 and CIAICO/2023/253 and the Ministry of Education, Youth and Sports of the Czech Republic and the European Union European Structural and Investment Funds in the frames of Operational Programme Research, Development and Education project Hybrid Materials for Hierarchical Structures (HyHi, Reg. No. CZ.02.1.01/0.0/0.0/16_019/0000843), for supporting this work. J. Gomez-Caturla wants to thank for the grant JDC2024-053152-I funded by MCIN/AEI/https://doi.org/10.13039/5 01100011033 and, as appropriate, by ESF Investing in your future or by European Union NextGenerationEU/PRTR . Microscopy services at UPV are also acknowledged for their help in collecting and analyzing FESEM images. Funding for open access charge: CRUEUniversitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Innovative Development and Characterization of Water Kefir Grains in thermoplastic composites prepared by injection molding

  • Peltzer, Mercedes Ana
  • Arrieta, Marina Patricia
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Sanchez-Nacher, Lourdes|||0000-0002-8627-4576
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
[EN] This study focuses on developing highly efficient and biodegradable polymers using water kefir grains (WKG), glycerol and water to produce thermoplastic water kefir (TWK) and blending it with polylactic acid (PLA). This research demonstrates the feasibility of extrusion and injection molding processes to produce thermoplastic kefir as a sustainable alternative to petroleum-based plastics in the packaging industry. The mechanical properties of the developed materials reveal that TWK is highly ductile, with an elongation at break of 35%, and that this elongation decreases as the amount of PLA increases in the blends. On the other hand, elastic modulus and tensile strength increase with the PLA content. Thermal properties show that TWK is amorphous, but when PLA is added, crystallinity increases and all thermal transitions shift towards higher temperatures as the PLA content increases. Moreover, the glass transitions of TWK (¿55¿°C) and PLA (68¿°C) are also shifted due to the blending of both polymers. These results suggest the presence of limited interfacial interactions between both polymers rather than full thermodynamic miscibility. Despite that, miscibility is not complete, as it is demonstrated by the appearance of spherulites in FESEM images. As expected, all materials demonstrated to be completely biodegradable within 3 to 7 weeks under controlled compost soil conditions., This research is a part of the grants PID2023-152869OB-C22, TED2021-131762A-I00 and PID2024-157368NB-C32, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU /PRTRand by ERDF A way of making Europe. The authors also thank Generalitat Valenciana - GVA, grant number CIGE/ 2023/46 and CIAICO/2023/253, for supporting this work. Funded with Aid for First Research Projects (PAID-06-22), Vice-rectorate for Research of the Universitat Politecnica de Valencia (UPV). In addition, we thank Agencia Nacional de Promocion Científica y Tecnologica (Argentina) through PICT-2021-0092 and the National University of Quilmes (UNQ, Argentina) through the R&D program PUNQ R 990/19 Expte: 827- 1300/19. J. Gomez-Caturla wants to thank for the grant JDC2024- 053152-I funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by ESF Investing in your future or by European Union NextGenerationEU/PRTR . Funding for open access charge: CRUEUniversitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of processing temperature profile during melt extrusion on thermoplastic starch production

  • Aldas, Miguel
  • Arrieta, Marina P.
  • Pavón-Vargas, Cristina Paola|||0000-0003-2902-0059
  • Rosa-Ramírez, Harrison de la|||0000-0002-2913-7938
  • López-Martínez, Juan|||0000-0001-6904-2282
[EN] This work aims to evaluate the influence of the processing temperature on thermoplastic starch (TPS) for scalable production at the industrial level. Thus, it analyses the impact of six different extruding temperature profiles to plasticize native starch with water as well as with glycerol to obtain thermoplastic starch (TPS) produced by melt-extrusion. The temperature profiles ranged from 70 to 150 degrees C. At temperature profiles below 100 degrees C, the extrusion conditions were insufficient to disrupt the starch granules completely. Therefore, the material did not plasticize correctly, and the starchy matrix plasticizes partially using a temperature profile of 100 degrees C. The water evaporation process affects the final material's microstructure. At temperature profiles above 100 degrees C (i.e., 110 and 130 degrees C), the extrusion conditions allowed the disruption of the starch granule as well as a good material plasticization to obtain TPS. Although TPS obtained with a temperature profile of 150 degrees C displayed the highest mechanical properties, the material shows signs of thermal degradation under these conditions. Therefore, TPS processed at a profile with a maximum temperature of 130 degrees C showed a higher plasticization effect, good thermal and mechanical properties, and good water uptake capability. With its potential for successful industrial production, TPS can be obtained by processing native starch with water and glycerol at low share rates of 20 rpm and using 130 degrees C as a maximum processing temperature, offering a range of benefits., This research was funded by the Spanish Ministry of Science and Innovation (MCIN) through grants: PID2023-152869OB-C22 funded by MCIN/AEI/10.13039/501100011033 and the European Union Next-GenerationEU/PRTR as well as PID2021-123753NA-C32 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Naturally occurring eugenyl acetate as biobased plasticizer for sustainable polylactide formulations with improved toughness

  • Barrera-Juca, D.
  • Guijarro, N.
  • Marset, X.
  • Lázaro-Hernández, C.|||0009-0002-8250-9363
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Balart, Rafael|||0000-0001-5670-7126
[EN] In this study, we explore the potential of eugenyl acetate (EAc), a naturally occurring ester of eugenol, as a biobased plasticizer to overcome the intrinsic brittleness of polylactide (PLA) derived from starch. A theoretical assessment of the miscibility between PLA and EAc is carried out. Our findings demonstrate that EAc shows exceptional miscibility with PLA, as confirmed by their similar solubility parameters (EAc-19.83 MPa1/2, and PLA-20.66 MPa1/2), and an interaction parameter of ¿ = 0.39. The incorporation of EAc improves the ductility of PLA, with strain at break increasing to 427.7 % at 20 wt% EAc, compared to a brittle 10.2 % for neat PLA. The plasticizing effect of EAc also leads to a considerable reduction in the glass transition temperature of PLA, from 60.4 °C to 35.7 °C at 20 wt% EAc. Scanning electron microscopy reveals no phase separation and the development of plastic deformation in PLA formulations with 15¿20 wt% EAc. Additionally, all plasticized formulations exhibit full biodegradation in controlled compost conditions in <8 weeks. These results contribute to advancing PLA-based formulations that are both high-performance and eco-friendly, supporting the broader goals of sustainable development in polymer science., This research is a part of the grant PID2023-152869OB-C22, and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/ 501100011033 and by the European Union NextGenerationEU /PRTR. The authors also thank Generalitat Valenciana - GVA, grant number CIGE/2023/46 and CIAICO/2023/253, for supporting this work. J. Gomez-Caturla wants to thank FPU20/01732 grant funded by MCIN/ AEI/10.13039/501100011033 and by ESF Investing in your future. C. Lazaro-Hdez wants to thank CIACIF/2023/244 grant funded by Generalitat Valenciana GVA. X. Marset thanks the Spanish Ministerio de Ciencia e Innovacion ¿ (PID2021-127332NB). N. Guijarro thanks the Spanish Ministry of Science & Innovation for the Ramon y Cajal Program (RYC2018-023888-I), as well as the support received via the projects CNS2023-145354 and PID2021-128805NA-I00. This project has also received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (grant agreement No. 948829). Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Plasticization of Polylactide Using Biobased Epoxidized Isobutyl Esters Derived from Waste Soybean Oil Deodorizer Distillate

  • Najera-Losada, L.
  • Narváez-Rincón, P.C.
  • Orjuela, A.
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Fenollar, Octavio|||0000-0003-4323-7414
  • Balart, Rafael|||0000-0001-5670-7126
[EN] A series of epoxidized isobutyl esters (EIE) derived from soybean oil deodorizing distillate (SODD) were synthesized via esterification with isobutanol followed by epoxidation. Epoxidized isobutyl soyate (EIS), epoxidized isobutyl soyate distillate (EISD), as well as the epoxidized esters of the main fatty acids contained in SODD, namely, epoxidized isobutyl linoleate (EIL), and epoxidized isobutyl oleate (EIO) were also synthesized and assessed as environmentally friendly plasticizers for polylactide (PLA). A comparison of the plasticizing efficiency of 10 wt.% of these EIE on PLA properties is addressed in this work. The effects of the different EIE on mechanical properties (tensile and impact tests) at 21 degrees C, thermal transitions and thermal degradation, dynamic-mechanical thermal properties and dimensional change with temperature, and morphology are evaluated and compared with commercial epoxidized soybean oil (ESBO), and acetyl tributyl citrate (ATBC). Tensile tests indicate that EIE provide increased elongation at break from 8.8% (neat PLA), up to 10-32%, depending on the EIE. EIE seem to be more compatible with PLA as observed by field emission scanning electron microscopy (FESEM) since they do not give evidence of phase separation, or plasticizer saturation, which is clearly observed with ESBO. Regarding thermal properties, all EIE provide a noticeable decrease in the glass transition temperature (Tg) from 61.6 degrees C (neat PLA), down to values ranging from 42 to 48 degrees C, remarkably lower than the decrease provided by ESBO with a Tg value of 56.6 degrees C. These findings reveal that EIE are promising plasticizers for PLA with balanced properties and contribute to improve its intrinsic brittleness by increasing the impact toughness., This research is a part of the grant PID2023-152869OB-C22, funded by MCIN/AEI/https://doi.org/10.13039/501100011033 and the grant TED2021-131762A-I00, funded by MCIN/AEI/https://doi.org/10.13039/501100011033 and by the European Union "NextGenerationEU"/PRTR. Authors also thank Generalitat Valenciana-GVA for funding this research through the grant numbers AICO/2021/025 and CIGE/2021/094. J. Gomez-Caturla wants to thank FPU20/01732 grant funded by MCIN/AEI/https://doi.org/10.13039/501100011033 and by ESF Investing in your future.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Selective lignin conversion via flow photocatalysis for vanillin and bioplasticizers production

  • Marset, Xavier
  • Montilla-Verdú, Salvador
  • Pastor, Francisco J.
  • Rico Vargas, Elio
  • Gomez-Caturla, Jaume
  • Miranda-Pinzon, Mario
  • Lazaro-Hdez, Carlos
  • Bertella, Stefania
  • Ortuño, Manuel A.
  • Balart, Rafael
  • Aschauer, Ulrich
  • Guijarro, Nestor
  • Marset, Xavier|||/items/264458f6-b460-4a46-81f9-32bcd73610cb
  • Montilla-Verdú, Salvador|||/items/1f60cace-de12-4c2f-b23d-656d1466fe87
  • Rico Vargas, Elio|||/items/e0ee2f23-487d-4722-b959-2a3749d57bd1
  • Ortuño, Manuel A.|||/items/8e15fce8-7d2f-408c-83de-bc85da711f44
  • Guijarro, Nestor|||/items/c3f0ef18-dc8e-4f72-81e4-387b754804f5
Lignin valorization remains a roadblock in the development of green biorefineries. Currently, depolymerization strategies predominantly depend on energy- and resource-intensive thermochemical methods, while potential applications of the resulting bio-based products are often overlooked. Here, we show a scalable photocatalytic flow reactor for lignin deconstruction that operates at ambient conditions, along with a downstream process that yields commercially viable products at gram scale. An anthraquinone-based photocatalytic platform, when packed in a flow bed reactor, is demonstrated to selectively and nearly quantitatively cleave lignin’s β-O-4 moieties, achieving a benchmark yield of 7.1 wt% for vanillin. The utilization of residual oligomers as plasticizers for biobased polylactic acid resulted in improved mechanical properties and shape memory effects, while maintaining its suitability for conventional 3D printing. This aldehyde-oriented platform represents a key advancement that complements existing ketone-oriented photocatalytic approaches targeting valuable chemicals from lignin conversion, and it ultimately contributes to the holistic utilization of lignin.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Solvent-Free Synthesis of Poly(lactic acid) by Reactive Extrusion: Role of α-Tocopherol and Catalyst Loading

  • Miranda-Pinzon, Mario
  • Gomez-Caturla, Jaume
  • Jiménez, Alfonso
  • Garrigós, María del Carmen
  • Balart, Rafael
  • Marset, Xavier
  • Jiménez, Alfonso|||/items/bbdcc026-8576-4bf4-95b9-40453b9ff3ec
  • Garrigós, María del Carmen|||/items/e102a891-6551-4c12-a4f0-f84d26eacd65
  • Marset, Xavier|||/items/264458f6-b460-4a46-81f9-32bcd73610cb
Poly(lactic acid) (PLA) was synthesized by ring-opening polymerization (ROP) of l-lactide through reactive extrusion using Sn(Oct)2 as the catalyst, 1-dodecanol as the initiator, and α-tocopherol as a natural antioxidant. This work combined reaction-time monitoring with structure–property analysis to define the optimum processing window and formulation. In the first stage, samples collected during reactive extrusion were analyzed by differential scanning calorimetry (DSC) and Fourier-transform infrared (FTIR), showing the progressive consumption of l-lactide and the formation of PLA. The main monomer-related signals disappeared after approximately 12 min, while the most favorable thermal response was obtained after 18 min, indicating an optimum balance between conversion and thermal exposure. In the second stage, the effects of α-tocopherol and catalyst:monomer ratio were evaluated by mechanical, thermal, colorimetric, gel permeation chromatography (GPC), and FTIR analyses. For the 1:1000 formulation, α-tocopherol increased the molecular weight to 30,926 g mol–1 and the tensile strength to 34.1 MPa while also enhancing crystallinity and preserving a lighter, less yellow appearance. Among the antioxidant-containing samples, the 1:1000 catalyst:monomer ratio provided the best overall balance between conversion, molecular weight, mechanical performance, and thermal behavior. FTIR confirmed successful PLA formation in the optimized formulations, whereas the 1:5000 sample retained lactide-related bands, consistent with incomplete conversion and inferior properties. These results demonstrate that reactive extrusion is a viable solvent-free route for PLA synthesis when residence time, natural antioxidant stabilization, and catalyst loading are jointly optimized.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Naturally occurring eugenyl acetate as biobased plasticizer for sustainable polylactide formulations with improved toughness

  • Barrera-Juca, D.
  • Lazaro-Hdez, Carlos
  • Gomez-Caturla, Jaume
  • Guijarro, Nestor
  • Marset, Xavier
  • Balart, Rafael
  • Guijarro, Nestor|||/items/c3f0ef18-dc8e-4f72-81e4-387b754804f5
  • Marset, Xavier|||/items/264458f6-b460-4a46-81f9-32bcd73610cb
In this study, we explore the potential of eugenyl acetate (EAc), a naturally occurring ester of eugenol, as a biobased plasticizer to overcome the intrinsic brittleness of polylactide (PLA) derived from starch. A theoretical assessment of the miscibility between PLA and EAc is carried out. Our findings demonstrate that EAc shows exceptional miscibility with PLA, as confirmed by their similar solubility parameters (EAc-19.83 MPa1/2, and PLA-20.66 MPa1/2), and an interaction parameter of χ = 0.39. The incorporation of EAc improves the ductility of PLA, with strain at break increasing to 427.7 % at 20 wt% EAc, compared to a brittle 10.2 % for neat PLA. The plasticizing effect of EAc also leads to a considerable reduction in the glass transition temperature of PLA, from 60.4 °C to 35.7 °C at 20 wt% EAc. Scanning electron microscopy reveals no phase separation and the development of plastic deformation in PLA formulations with 15–20 wt% EAc. Additionally, all plasticized formulations exhibit full biodegradation in controlled compost conditions in <8 weeks. These results contribute to advancing PLA-based formulations that are both high-performance and eco-friendly, supporting the broader goals of sustainable development in polymer science.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Enhanced properties of methyl hydroxyethyl cellulose films with arabinoxylans-rich extract from brewer's spent grain

  • Rojas-Lema, Sandra
  • Mellinas-Ciller, Ana-Cristina
  • Jiménez, Alfonso
  • Garrigós, María del Carmen
  • Garcia-Garcia, Daniel
  • Balart, Rafael
  • Garrigós, María del Carmen|||/items/e102a891-6551-4c12-a4f0-f84d26eacd65
  • Jiménez, Alfonso|||/items/bbdcc026-8576-4bf4-95b9-40453b9ff3ec
  • Mellinas-Ciller, Ana-Cristina|||/items/8f6577ab-b8f1-410d-9d1e-fa3fbf1b7f01
Environmentally friendly methyl hydroxyethyl cellulose (MHEC)-based films added with different amounts (10–30 wt.%) of an arabinoxylans-rich extract (AxRE) obtained from brewer's spent grain (BSG) were developed by the solvent casting method. Some decrease in mechanical properties of films was shown with increasing AxRE content. Addition of AxRE led to a decrease in tensile strength to 23.0–33.7 MPa which are typical of commodity plastics used in the packaging industry. AxRE increased the thermal stability of MHEC-based films, as evidenced by a slight increase in melting point observed through differential scanning calorimetry (DSC) together with a delay in the thermodegradation profile obtained by thermogravimetric analysis (TGA), with onset degradation temperatures above 300 °C for all compositions. Additionally, films with AxRE showed higher hydrophobic behavior, increasing water contact angle from 58.6° (neat MHEC) up to 67.8° for films containing 20 wt.%-AxRE and a decreasing in the moisture content of MHEC films (5.6 %) to 4.2 % for films containing 10 wt.%-AxRE. Interestingly, the arabinoxylans-rich extract significantly increased the antioxidant activity of MHEC-based films with values up to 50 % of 2,2-diphenyl-1-picrylhydrazyl (DPPH) inhibition in films with 20 wt.%-AxRE. The obtained films show potential for active packaging, given that they have demonstrated to provide important antioxidant activity.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

From agro-waste to functional biopolymers: High-lignin PLA composites plasticized with eugenyl acetate for circular economy-based materials

  • Barrera-Juca, D.
  • Gomez-Caturla, Jaume
  • Vicente-Vinas, M.P.
  • Balart, Rafael
  • Marset, Xavier
  • Marset, Xavier|||/items/264458f6-b460-4a46-81f9-32bcd73610cb
Polylactic acid (PLA) is one of the most widely used bioplastics; however, its inherent brittleness and the limited filler contents typically employed restrict both its performance and bio-based content. In this work, fully disintegrable under industrial composting conditions PLA biocomposites containing exceptionally high lignin contents (30–50 wt%) were successfully developed using eugenyl acetate (EAc) as a fully natural plasticizer and itaconic anhydride–grafted PLA (PLA-g-IA) as a compatibilizer. Eugenyl acetate induced a drastic reduction in the glass transition temperature and transformed PLA into a highly ductile material, achieving strain at break values exceeding 400%. The incorporation of lignin significantly increased stiffness, hardness, and char formation, while progressively reducing toughness at high loadings. Among the investigated formulations, the composite containing 30 wt% lignin exhibited the best balance between ductility, stiffness, and bio-based content, maintaining strain at break values more than 100% higher than neat PLA. Mechanical, thermomechanical, thermal, morphological, and surface analyses confirmed that the combined plasticization-compatibilization strategy enables stable processing and functional performance even at extreme lignin contents. All materials fully disintegrated under industrial composting conditions within six weeks, demonstrating that neither lignin nor eugenyl acetate compromise end-of-life circularity. These results establish a new pathway for designing high-bio-content, fully disintegrable PLA materials through synergistic natural modification strategies.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Sustainable Approach to Overcome Polylactide Brittleness with Biobased Esters of Isosorbide and Fatty Acids

  • Miranda-Pinzon, Mario
  • Gomez-Caturla, Jaume
  • Ivorra-Martinez, Juan
  • Guijarro, Nestor
  • Marset, Xavier
  • Balart, Rafael
  • Guijarro, Nestor|||/items/c3f0ef18-dc8e-4f72-81e4-387b754804f5
  • Marset, Xavier|||/items/264458f6-b460-4a46-81f9-32bcd73610cb
This work reports on the design and synthesis of sustainable plasticizers from plant-based isosorbide to enhance the intrinsic brittleness of polylactide (PLA). To keep fully biobased carbon, isosorbide was esterified with fatty acids of varying chain length, leading to isosorbide dibutyrate (IDB), dicaprylate (IDC), and dipalmitate (IDP). These esters were incorporated into PLA at different concentrations. An approach to assess PLA-plasticizer miscibility was conducted by calculating solubility parameters (δ) and the Flory–Huggins interaction parameter, χ. The effect of plasticizer type and concentration on mechanical, thermal, and thermomechanical properties, as well as on microstructure and biodegradation, was also addressed. The results indicated that IDB and IDC notably enhanced PLA toughness, reducing the PLA’s glass transition temperature (Tg) from 60.3 to 27.7 °C with 20 wt % IDC. Consequently, strain at break dramatically increased from 12.8% (PLA) to over 300% with 20 wt % IDB or IDC. In contrast, IDP exhibited limited miscibility, resulting in phase separation, though it still improved the impact strength and ductility. All formulations demonstrated exceptional disintegration in compost soil, underscoring their potential as “double green” plasticizers suitable for PLA. Since both PLA and isosorbide can be industrially derived from starch, this work places starch as a key platform for sustainable polymers.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ethylene brassylate as a biobased plasticizer for poly(lactic acid): Evaluation of mechanical, thermal, and biodegradation properties

  • Escriva-Faus, M.
  • Lascano, Diego
  • Miranda-Pinzon, M.
  • Lazaro-Hdez, C.
  • Sanchez-Nacher, L.
  • Gomez-Caturla, J.
Poly(lactic acid) (PLA) is a bio-based polymer with high potential; however, its inherent brittleness restricts its practical applications. This work evaluates ethylene brassylate (EB), a macrocyclic diester of natural origin, as a plasticizer for PLA at 5–20 wt%. Thermal analysis confirmed a plasticizing effect, with the glass transition temperature decreasing from 59.9 °C in neat PLA to 38.0 °C in PLA-20 EB. Mechanical tests showed that 20 wt% EB increased elongation at break from 10 % (neat PLA) to over 460 % and improved impact resistance by ∼70 %. Furthermore, moisture resistance was preserved, and microscopy confirmed good miscibility with no phase separation. Under composting, degradation occurs more rapidly in proportion to EB content, reaching ∼90 % mass loss after four weeks. Migration tests revealed values below 40 mg kg<sup>−1</sup> for PLA-EB < 10 wt% EB, whereas PLA-15 EB reached the regulatory limit. EB is therefore an efficient bio-based plasticizer for PLA, offering enhanced ductility, toughness, and biodegradation, with promising applications in sustainable packaging, especially for refrigerated and cold-chain storage., This research is a part of the grant PID2023-152869OB-C22, and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union “NextGenerationEU”/PRTR. The authors also thank Generalitat Valenciana - GVA, grant number CIGE/2023/46 and CIAICO/2023/253, for supporting this work. Microscopy services at UPV are also acknowledged for their help in collecting and analyzing FESEM images. D.L. thanks Generalitat Valenciana - GVA for funding a postdoc position through the CIAPOS program co-funded by ESF Investing in your future, grant number CIAPOS/2022/140. C. Lazaro-Hdez thanks Generalitat Valenciana - GVA for funding a predoc position through the CIACIF program co-funded by ESF Investing in your future, grant number CIACIF/2023/244. M. Miranda-Pinzon thanks the Vice-rectorate for Research of the Universitat Politècnica de València (UPV) for funding a predoctoral contract in the PAID-01-24 program. Funding for open access charge: CRUE-Universitat Politècnica de València., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High efficiency plasticizers for flexible thermoplastic zein processed by extrusion and injection molding

  • Benavides-Ramos, A.
  • Lazaro-Hdez, C.
  • Gomez-Caturla, J.
  • Lascano, Diego
  • Balart, R.
This study addresses the limited availability of injection-molded zein systems by evaluating three structurally contrasted plasticizers, diethylene glycol (DEG), dipropylene glycol (DPG), and diethanolamine (DEA), to produce thermoplastic zein by hot extrusion and injection molding. Beyond demonstrating melt processability, the work seeks to clarify how plasticizer chemistry governs the structure-property relationships of zein under scalable thermoplastic processing conditions. All formulations yielded homogeneous injection-molded specimens. FTIR and XRD revealed plasticizer-dependent perturbations in the protein matrix, while DSC and DMTA showed clear differences in thermomechanical softening. The linear and flexible structure of DEG promoted the strongest disruption/reorganization of zein packing, increasing molecular mobility and translating into the lowest glass transition temperature (T<inf>g</inf>) (42.0 ºC for 25 DEG), highest ductility (elongations at break: 74.2%) and highest impact strength (∼70 kJ m−2). In contrast, the branched structure of DPG and the amino-diol character of DEA produced more moderate plasticization, retaining higher stiffness and T<inf>g</inf> values, while DEA strongly increased surface wettability (WCA< 10º). Bulk water uptake reached high maxima (∼277–310% at 7 days). Under controlled composting, near-complete disintegration occurred within 4–6 weeks (20DPG slowest). Overall, plasticizer chemistry enables the injection molding of tunable zein parts with short composting disintegration times., This research was supported by grants PID2023–152869OB-C22 and TED2021–131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union “NextGenerationEU”/PRTR. D. Lascano acknowledges grant JDC2023–051885-I funded by MCIN/AEI/10.13039/501100011033 and by the ESF + . J. Gomez-Caturla wants to thank for the grant JDC2024–053152-I funded by MCIN/AEI/ 10.13039/501100011033 and, as appropriate, by “ESF Investing in your future” The authors also acknowledge the Generalitat Valenciana (GVA) for supporting this work through grants CIGE/2023/46 and CIAICO/2023/253. C. Lázaro-Hdez gratefully acknowledges the Generalitat Valenciana for funding a predoctoral position through the CIACIF program co-funded by the ESF Investing in your future (grant CIACIF/2023/244). Funding for open access charge: CRUE–Universitat Politècnica de València., Peer reviewed