Pasar al contenido principal

Materiales innovadores basados en matrices poliméricas para almacenamiento de energía térmica

JDC2023-051885-I

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Desarrollar, Atraer y Retener Talento
Subprograma Subprograma Estatal de Formación
Convocatoria Juan de la Cierva
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High efficiency plasticizers for flexible thermoplastic zein processed by extrusion and injection molding

  • Benavides-Ramos, A.
  • Lázaro-Hernández, C.|||0009-0002-8250-9363
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Lascano-Aimacaña, Diego Sebastián|||0000-0002-0996-1946
  • Balart, Rafael|||0000-0001-5670-7126
[EN] This study addresses the limited availability of injection-molded zein systems by evaluating three structurally contrasted plasticizers, diethylene glycol (DEG), dipropylene glycol (DPG), and diethanolamine (DEA), to produce thermoplastic zein by hot extrusion and injection molding. Beyond demonstrating melt processability, the work seeks to clarify how plasticizer chemistry governs the structure-property relationships of zein under scalable thermoplastic processing conditions. All formulations yielded homogeneous injection-molded specimens. FTIR and XRD revealed plasticizer-dependent perturbations in the protein matrix, while DSC and DMTA showed clear differences in thermomechanical softening. The linear and flexible structure of DEG promoted the strongest disruption/reorganization of zein packing, increasing molecular mobility and translating into the lowest glass transition temperature (Tg) (42.0 ºC for 25 DEG), highest ductility (elongations at break: 74.2%) and highest impact strength (~70¿kJ¿m¿2). In contrast, the branched structure of DPG and the amino-diol character of DEA produced more moderate plasticization, retaining higher stiffness and Tg values, while DEA strongly increased surface wettability (WCA< 10º). Bulk water uptake reached high maxima (~277¿310% at 7 days). Under controlled composting, near-complete disintegration occurred within 4¿6 weeks (20DPG slowest). Overall, plasticizer chemistry enables the injection molding of tunable zein parts with short composting disintegration times., This research was supported by grants PID2023 152869OB-C22 and TED2021 131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU /PRTR. D. Lascano acknowledges grant JDC2023 051885-I funded by MCIN/AEI/10.13039/501100011033 and by the ESF + . J. Gomez-Caturla wants to thank for the grant JDC2024 053152-I funded by MCIN/AEI/ 10.13039/501100011033 and, as appropriate, by ESF Investing in your future The authors also acknowledge the Generalitat Valenciana (GVA) for supporting this work through grants CIGE/2023/46 andCIAICO/2023/253. C. L¿ azaro-Hdez gratefully acknowledges the Generalitat Valenciana for funding a predoctoral position through the CIACIF program co-funded by the ESF Investing in your future (grantCIACIF/2023/244). Funding for open access charge: CRUE Universitat Politecnica de Valencia.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High efficiency plasticizers for flexible thermoplastic zein processed by extrusion and injection molding

  • Benavides-Ramos, A.
  • Lazaro-Hdez, C.
  • Gomez-Caturla, J.
  • Lascano, Diego
  • Balart, R.
This study addresses the limited availability of injection-molded zein systems by evaluating three structurally contrasted plasticizers, diethylene glycol (DEG), dipropylene glycol (DPG), and diethanolamine (DEA), to produce thermoplastic zein by hot extrusion and injection molding. Beyond demonstrating melt processability, the work seeks to clarify how plasticizer chemistry governs the structure-property relationships of zein under scalable thermoplastic processing conditions. All formulations yielded homogeneous injection-molded specimens. FTIR and XRD revealed plasticizer-dependent perturbations in the protein matrix, while DSC and DMTA showed clear differences in thermomechanical softening. The linear and flexible structure of DEG promoted the strongest disruption/reorganization of zein packing, increasing molecular mobility and translating into the lowest glass transition temperature (T<inf>g</inf>) (42.0 ºC for 25 DEG), highest ductility (elongations at break: 74.2%) and highest impact strength (∼70 kJ m−2). In contrast, the branched structure of DPG and the amino-diol character of DEA produced more moderate plasticization, retaining higher stiffness and T<inf>g</inf> values, while DEA strongly increased surface wettability (WCA< 10º). Bulk water uptake reached high maxima (∼277–310% at 7 days). Under controlled composting, near-complete disintegration occurred within 4–6 weeks (20DPG slowest). Overall, plasticizer chemistry enables the injection molding of tunable zein parts with short composting disintegration times., This research was supported by grants PID2023–152869OB-C22 and TED2021–131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union “NextGenerationEU”/PRTR. D. Lascano acknowledges grant JDC2023–051885-I funded by MCIN/AEI/10.13039/501100011033 and by the ESF + . J. Gomez-Caturla wants to thank for the grant JDC2024–053152-I funded by MCIN/AEI/ 10.13039/501100011033 and, as appropriate, by “ESF Investing in your future” The authors also acknowledge the Generalitat Valenciana (GVA) for supporting this work through grants CIGE/2023/46 and CIAICO/2023/253. C. Lázaro-Hdez gratefully acknowledges the Generalitat Valenciana for funding a predoctoral position through the CIACIF program co-funded by the ESF Investing in your future (grant CIACIF/2023/244). Funding for open access charge: CRUE–Universitat Politècnica de València., Peer reviewed