Pasar al contenido principal

Optimizing thermochemical energy storage through additive manufacturing processes

JDC2024-053063-I

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Recursos Humanos
Subprograma Subprograma Estatal de Formación, Atracción y Retención del Talento Investigador e Innovador
Convocatoria Juan de la Cierva
Año convocatoria 2024
Plan Estatal 2024-2027 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Advancing Sustainable Plastics through the Optimization of Glycerolplasticized Gluten as a Renewable Polymer Alternative

  • Peñafiel-Alvarado, J. I.
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Balart, Rafael|||0000-0001-5670-7126
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
[EN] This study investigates the development of gluten-based samples through extrusion and injection molding, focusing on optimizing extrusion conditions to enhance material properties. During the extrusion process, the combined effect of shear and heat induces protein denaturation, promoting the formation of ß-sheets as confirmed by chemical characterization. Variations in extrusion parameters affect the torque evolution throughout processing, revealing their influence on structural behavior. A statistical analysis identified extrusion temperature, time, and screw speed as significant factors determining the mechanical performance of the samples. Thermal and thermo-mechanical analyses revealed that increasing extrusion severity resulted in an increase in tensile strength (from 2.80 to 4.14 MPa) and stiffness (from 133 to 280 MPa), along with an increase in elongation at break (from 11.7 to 29.8%). Additionally, the denaturation peak shifted from 93.1 °C to 78.2 °C, with a reduction in enthalpy from 170.6 to 57.2 J/g. Dynamic mechanical analysis showed an increase in storage modulus (from 30.2 to 45.1 MPa). Despite extensive prior research indicating that processing variables significantly influence protein denaturation and the resulting material characteristics, the distinct and synergistic impacts of critical extrusion parameters on thermoplastic gluten systems remain insufficiently understood. The present analysis underscores that precise regulation of extrusion conditions plays a fundamental role in modulating both the mechanical behavior and thermal stability of gluten-derived materials, thereby enabling the optimization of their functional performance., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This research is a part of the grant PID2023-152869OB-C22, and thegrant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU /PRTR. Theauthors also thank Generalitat Valenciana - GVA, grant number CIGE/2023/46 and CIAICO/2023/253, for supporting this work. J. Ivorra-Martinez thanks Generalitat Valenciana - GVA for funding a postdoc position through the CIAPOS program co-funded by ESF Investing in yourfuture, grant number CIAPOS/2023/362. Funding for open access charge: CRUE-Universitat Politècnica de València. J. Gomez-Caturla wants tothank FPU20/01732 grant funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. Grant JDC2024-053063-Ifunded by MICIU/AEI /10.13039/501100011033 and by the FSE+. Grant JDC2024-053152-I funded by MICIU/AEI /10.13039/501100011033and by the FSE+.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Environmentally Friendly Alternatives to Bis(2-ethylhexyl) Phthalate as Plasticizers for Poly(lactic acid)

  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Vicente-Vinas, Maria del Puig|||0009-0005-0024-1503
  • Garcia-Sanoguera, David|||0000-0002-1923-9519
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Covas, José A.
[EN] This study evaluated a conventional petroleum derived diester plasticizer and three environmentally friendly diester plasticizers for polylactic acid (PLA), focusing on processing, mechanical, thermal, chemical, and surface properties. Bis(2-ethylhexyl) phthalate (DEHP), a widely used plasticizer for PLA, is derived from petrochemical sources and is classified as a pollutant, which motivated the search for biobased alternatives. PLA compounds containing biobased diester plasticizers were prepared by extrusion, and test specimens were obtained by injection molding. The results showed that the biobased plasticizers bis(2-ethylhexyl) maleate (DEHM) and bis(2-ethylhexyl) sebacate (DEHS) significantly improved ductility, which was confirmed by fracture surface analysis. Thermal and thermomechanical analyses indicated enhanced chain mobility, along with increased crystallization and a reduction in glass transition temperature. Chemical characterization confirmed that plasticization occurred through physical interactions, preserving the chemical integrity of the polymer matrix. In addition, diester plasticizer incorporation modified surface wettability, facilitating water diffusion and increasing affinity toward distilled water, which could be beneficial for applications such as biodegradable packaging or agricultural materials, where moisture interaction may influence end-of-life behavior and environmental degradation., This research is a part of the grant PID2023-152869OBC22, and the grant TED2021-131762 A-I00, funded by MCIN/AEI/ https://doi.org/10.13039/501100011033 and by the European Union NextGenerationEU /PRTR. The authors also thank Generalitat Valenciana - GVA, grant number CIGE/2023/46 and CIAICO/2023/253, for supporting this work. Funding for open access charge: CRUEUniversitat Politècnica de València. Microscopy services at UPV are also acknowledged for their help in collecting and analyzing FESEM images. J. Ivorra-Martinez wants to thank for the grant Grant JDC2024-053063-I funded by MICIU/AEI /https://doi.org/10.13039/5 01100011033 and by the FSE+. J. Gomez-Caturla wants to thank for the grant JDC2024-053152-I funded by MICIU/AEI /https://doi.org/10.13039/501100011033 and by the FSE+. Funding for open access charge: CRUE Universitat Politècnica de València.