Pasar al contenido principal

ESTRATEGIAS DEECONOMIA CIRCULAR PARA EL ESCALADO DE BIOPOLIMEROS INCORPORANDO NANOCARGAS Y PLASTIFICANTES BIOBASADOS

PID2024-157368NB-C33

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para la Investigación y el Desarrollo Experimental
Subprograma Subprograma Estatal de Generación de Conocimiento Científico-Técnico y Desarrollo Experimental
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2024
Plan Estatal 2024-2027 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sol-Gel Synthesis of New Bioactive Organic-Inorganic Materials for Biomedical Use: SiO2/Ferulic Acid/PEG

  • Barrino, Federico
  • Giuliano, Federica
  • Rosa-Ramírez, Harrison de la|||0000-0002-2913-7938
  • Samper, María-Dolores|||0000-0002-5102-8412
[EN] In this study, a series of SiO2-based biomaterials synthesized via the sol-gel technique was developed by integrating different weight percentages (10wt% and 15wt%) of ferulic acid (FA) and varying weight percentages (6wt%, 12wt%, and 24wt%) of polyethylene glycol (PEG). Chemical characterization of the materials was performed by FTIR-ATR spectroscopy to confirm the incorporation of the functional agents and the matrix structure. Biocompatibility was assessed through cell-based assays and gene expression analysis, highlighting a positive effect of the materials on cell proliferation and the regulation of key markers for tissue regeneration. Finally, the ability to induce hydroxyapatite (HA) formation was verified using simulated body fluid (SBF) following the Kokubo test, demonstrating the bioactive potential of the treated surfaces. The obtained results indicate that the combination of SiO2, FA, and PEG via sol-gel represents a promising platform for applications in the field of bone regeneration and functional biomaterials., This research was funded by MICIU/AEI/10.13039/501100011033 and, as appropriate, by "ERDF A way of making Europe," by "ERDF/EU," by the "European Union," or by the "European Union NextGenerationEU/PRTR."grant number PID2024-157368NB-C33.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design and Characterization of Sustainable PLA-Based Systems Modified with a Rosin-Derived Resin: Structure-Property Relationships and Functional Performance

  • Rosa-Ramírez, Harrison de la|||0000-0002-2913-7938
  • Pavón-Vargas, Cristina Paola|||0000-0003-2902-0059
  • López-Martínez, Juan|||0000-0001-6904-2282
  • Samper, María-Dolores|||0000-0002-5102-8412
  • Aldás-Carrasco, Miguel Fernando
  • Dominici, F.
  • Rallini, Marco
  • Puglia, Debora
  • Torre, Luigi
[EN] The design of sustainable polymer systems with tunable properties is essential for next-generation functional materials. This study examines the influence of a phenol-free modified rosin resin (Unik Print¿ 3340, UP)¿a maleic anhydride- and fumaric acid-modified gum rosin¿on the structural, thermal, rheological, and mechanical behavior of four poly(lactic acid) (PLA) grades with different molecular weights and crystallinity. Blends containing 3 phr of UP were prepared by melt compounding. Thermogravimetric analysis showed that the incorporation of UP did not alter the thermal degradation of PLA, confirming stability retention. In contrast, differential scanning calorimetry revealed that UP affected thermal transitions, suppressing crystallization and melting in amorphous PLA grades and shifting the crystallization temperature to lower values in semi-crystalline grades. The degree of crystallinity decreased for low-molecular-weight semi-crystalline PLA but slightly increased in higher-molecular-weight samples. Mechanical tests indicated that UP acted as a physical modifier, increasing toughness by over 25% for all PLA grades and up to 60% in the amorphous, low-molecular-weight grade. Rheological measurements revealed moderate viscosity variations, while FESEM analysis confirmed microstructural features consistent with improved ductility. Overall, UP resin enables fine tuning of the structure¿property relationships of PLA without compromising stability, offering a sustainable route for developing bio-based polymer systems with enhanced mechanical performance and potential use in future biomimetic material designs., This research was funded by MCIN/AEI/10.13039/501100011033 through grant PID2023- 152869OB-C22 by the European Union NextGenerationEU /PRTR and PID-AEI Project (grant PID2024-157368NB-C33) and ERDF A way of making Europe by the European Union.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Polybutylene succinate film incorporating essential oil as active packaging materials to prolong tomatoes shelf-life

  • Barrino, Federico
  • Finamore, Rosario
  • Mirpoor, Seyedeh Fatemeh
  • Schiraldi, Chiara
  • Rosa-Ramírez, Harrison de la|||0000-0002-2913-7938
  • Sempere-Torregrosa, Jaume|||0000-0002-8742-0301
  • López-Martínez, Juan|||0000-0001-6904-2282
  • Samper, María-Dolores|||0000-0002-5102-8412
[EN] The present research work deals with the laboratory scale manufacturing of thin films based on polybutylene succinate (PBS), a sustainably obtained biodegradable polyester (bioplastic), with the aim to propose their use in food packaging in order to slow down the food degradation process, to replace the polymers derived from fossil fuels. To this purpose, thin films of (PBS) were prepared by adding diverse Mediterranean herbs extracts up to 3 % by weight. Specifically, PBS was added with three different types of natural oils/extracts: thymol, carvacrol, and basil extract (mainly rich in eugenol). These compounds, well known for their antioxidant and antimicrobial potential, conferred functional activity to the films. The resulting materials were characterized in terms of chemical, thermal, optical, mechanical, and gas permeability properties, as well as antioxidant activity and preliminary food-contact tests. Tomatoes wrapped in the active films showed delayed oxidative browning and reduced microbial spoilage during three weeks of storage. Among the various formulations, the blend containing all essential oils (PBS/All) offered the best compromise between thermal stability, structural compactness, and preservation capacity. These results suggest that PBS/All films are promising candidates for sustainable active packaging applications., This research was partially funded by MCIN/AEI/10.13039/501100011033 through the PID-AEI Project (grant PID2021-123753NA-C33) , Project (grant PID2024-157368NB-C33) and the TED-AEI Project (grant TED2021-129920A-C43) and, as appropriate, by "ERDF A way of making Europe", by the "European Union" or by the "European Union NextGenerationEU/PRTR". This research was partially funded by Bionutra Project (Italian Ministry of Research) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Material Performance and Processing Behavior of Polyolefin Waste in Mechanical Recycling

  • Vazquez, Yamila V.
  • Miguel Guillem, Juan Vicente
  • Pavón-Vargas, Cristina Paola|||0000-0003-2902-0059
  • López-Martínez, Juan|||0000-0001-6904-2282
  • Samper, María-Dolores|||0000-0002-5102-8412
[EN] This study investigates the processability and performance limits of high-density polyethylene (HDPE) recovered from mixed polyolefin waste under realistic mechanical recycling conditions. The waste stream was processed by extrusion and injection molding, with parameters actively adapted. ATR-FTIR and DSC analysis confirmed HDPE as the matrix, contaminated with minor fractions of polypropylene (PP), PET, and polyurethane (PU). The reprocessed material exhibited a single melting peak at 132 degrees C and a melt flow rate (MFR) of 9.9 +/- 0.6 g 10 min-1, indicative of moderate degradation. Mechanical testing revealed reduced tensile strength and elongation at break compared to virgin HDPE, indicating compositional heterogeneity and poor interfacial adhesion. Field emission scanning electron microscopy (FESEM) revealed dispersed inclusions and microvoids acting as stress concentrators, consistent with reduced ductility. Crucially, progressive reduction of back pressure during processing optimization was essential for stabilizing melt flow and minimizing shear-induced degradation. This adjustment enabled consistent mold filling despite the material's variability. The results demonstrate that mixed HDPE waste can be successfully valorized for non-structural applications such as plastic lumber or pallets, providing a sustainable pathway for recycling heterogeneous streams without costly pre-treatment or compatibilization., This research was funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU /PRTR through the grant PID2023-152869OB-C22 and PID2024- 157368NB-C33, and by MCIN/AEI/10.13039/501100011033 through the TED-AEI Project (grant TED2021-129920A-C43) and ERDF A way of making Europe .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Thermal, Biological, and Bioactive Characterization of Sol-Gel Coating Materials for Biomedical Stainless Steel

  • Rosa-Ramírez, Harrison de la|||0000-0002-2913-7938
  • Samper, María-Dolores|||0000-0002-5102-8412
  • Valentino, Caterina
  • Giuliano, Federica
  • Elettra Vaccari, Melania
  • Barrino, Federico
[EN] The development of bioactive hybrid coatings for biomedical implants requires materials exhibiting suitable thermal stability, bioactivity, and biocompatibility. In this study, hybrid organic¿inorganic sol¿gel coatings based on silica (SiO2) and polyethylene glycol (PEG, 24 wt%) were functionalized with different concentrations of caffeic acid (CafA 5, 10, and 15 wt%) and deposited onto AISI 304 and AISI 316 stainless steel substrates by dip-coating without surface pre-treatment. The proposed approach enabled the formation of homogeneous hybrid coatings on untreated stainless steel substrates through a simple and scalable deposition process. A thermal analysis demonstrated the stability of the hybrid network and the effective integration of the organic and inorganic phases. Bioactivity was evaluated by in vitro immersion in simulated body fluid (SBF), while SEM observations revealed the formation of mineral deposits on the coating surface, and an EDX analysis confirmed the presence of calcium and phosphorus within the deposited layer. The formation of crystalline hydroxyapatite (HA) was subsequently confirmed by X-ray diffraction (XRD), confirming that all investigated formulations retained their ability to induce apatite formation after SBF immersion. In addition, in vitro biocompatibility assays confirmed that the developed materials exhibited concentration-dependent cytocompatibility, with the cellular response being influenced by the amount of incorporated CafA. Overall, the results demonstrate that the proposed hybrid materials combine thermal stability, bioactivity, and cytocompatibility, highlighting their potential as bioactive coatings for biomedical applications., This research was funded by MCIN/AEI/ 10.13039/501100011033 through the PID-AEI Project (grant PID2024-157368NB-C33) and ERDF A way of making Europe .