Pasar al contenido principal

SINTESIS DE BIONANOMATERIALES AVANZADOS CON PUNTOS CUANTICOS DE CARBONO CON FUNCIONALIDADES AVANZADAS

PID2023-152869OB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhanced properties of methyl hydroxyethyl cellulose films with arabinoxylans-rich extract from brewer&apos, s spent grain

  • Rojas-Lema, S.
  • Mellinas, C.
  • Jiménez, A.
  • Garrigos, M.C.
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Balart, Rafael|||0000-0001-5670-7126
[EN] Environmentally friendly methyl hydroxyethyl cellulose (MHEC)-based films added with different amounts (10-30 wt.%) of an arabinoxylans-rich extract (AxRE) obtained from brewer's spent grain (BSG) were developed by the solvent casting method. Some decrease in mechanical properties of films was shown with increasing AxRE content. Addition of AxRE led to a decrease in tensile strength to 23.0¿33.7 MPa which are typical of commodity plastics used in the packaging industry. AxRE increased the thermal stability of MHEC-based films, as evidenced by a slight increase in melting point observed through differential scanning calorimetry (DSC) together with a delay in the thermodegradation profile obtained by thermogravimetric analysis (TGA), with onset degradation temperatures above 300 °C for all compositions. Additionally, films with AxRE showed higher hydrophobic behavior, increasing water contact angle from 58.6° (neat MHEC) up to 67.8° for films containing 20 wt.%-AxRE and a decreasing in the moisture content of MHEC films (5.6 %) to 4.2 % for films containing 10 wt.%-AxRE. Interestingly, the arabinoxylans-rich extract significantly increased the antioxidant activity of MHEC-based films with values up to 50 % of 2,2-diphenyl-1-picrylhydrazyl (DPPH) inhibition in films with 20 wt.%-AxRE. The obtained films show potential for active packaging, given that they have demonstrated to provide important antioxidant activity., This research is a part of the grants PID2023-152869OB-C21, PID2023-152869OB-C22, PID2020-116496RB-C21, PID2020-116496RB-C22, and TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union "NextGener-ationEU"/PRTR. The authors also thank Generalitat Valenciana-GVA, grant numbers CIGE/2023/46, and CIAICO/2023/253, for supporting this work. S.R.-L. acknowledges the Santiago Grisolia grant from Generalitat Valenciana (GVA) (GRISOLIAP/2019/132) . Microscopy Services at UPV are also acknowledged for their support in collecting and analyzing FESEM images.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Solvent-Free Synthesis of Poly(lactic acid) by Reactive Extrusion: Role of a-Tocopherol and Catalyst Loading

  • Mario Nicolás
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Balart, Rafael|||0000-0001-5670-7126
  • Jiménez, Alfonso
  • Garrigós, María Carmen
  • Marset, Xavier
[EN] Poly(lactic acid) (PLA) was synthesized by ring-opening polymerization (ROP) of l-lactide through reactive extrusion using Sn(Oct)2 as the catalyst, 1-dodecanol as the initiator, and ¿-tocopherol as a natural antioxidant. This work combined reaction-time monitoring with structure¿property analysis to define the optimum processing window and formulation. In the first stage, samples collected during reactive extrusion were analyzed by differential scanning calorimetry (DSC) and Fourier-transform infrared (FTIR), showing the progressive consumption of l-lactide and the formation of PLA. The main monomer-related signals disappeared after approximately 12 min, while the most favorable thermal response was obtained after 18 min, indicating an optimum balance between conversion and thermal exposure. In the second stage, the effects of ¿-tocopherol and catalyst:monomer ratio were evaluated by mechanical, thermal, colorimetric, gel permeation chromatography (GPC), and FTIR analyses. For the 1:1000 formulation, ¿-tocopherol increased the molecular weight to 30,926 g mol¿1 and the tensile strength to 34.1 MPa while also enhancing crystallinity and preserving a lighter, less yellow appearance. Among the antioxidant-containing samples, the 1:1000 catalyst:monomer ratio provided the best overall balance between conversion, molecular weight, mechanical performance, and thermal behavior. FTIR confirmed successful PLA formation in the optimized formulations, whereas the 1:5000 sample retained lactide-related bands, consistent with incomplete conversion and inferior properties. These results demonstrate that reactive extrusion is a viable solvent-free route for PLA synthesis when residence time, natural antioxidant stabilization, and catalyst loading are jointly optimized., This research is a part of the grants PID2023-152869OB-C21, PID2023-152869OB-C22, and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union "NextGenerationEU"/PRTR. The authors also thank Generalitat Valenciana - GVA, grant number CIGE/2023/46 and CIAICO/2023/253J. Gomez-Caturla wants to thank for the grant JDC2024-053152-I funded by MCIN/AEI/ 10.13039/501100011033 and, as appropriate, by "ESF Investing in your future" or by "European Union NextGenerationEU/PRTR".
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Solvent-Free Synthesis of Poly(lactic acid) by Reactive Extrusion: Role of α-Tocopherol and Catalyst Loading

  • Miranda-Pinzon, Mario
  • Gomez-Caturla, Jaume
  • Jiménez, Alfonso
  • Garrigós, María del Carmen
  • Balart, Rafael
  • Marset, Xavier
  • Jiménez, Alfonso|||/items/bbdcc026-8576-4bf4-95b9-40453b9ff3ec
  • Garrigós, María del Carmen|||/items/e102a891-6551-4c12-a4f0-f84d26eacd65
  • Marset, Xavier|||/items/264458f6-b460-4a46-81f9-32bcd73610cb
Poly(lactic acid) (PLA) was synthesized by ring-opening polymerization (ROP) of l-lactide through reactive extrusion using Sn(Oct)2 as the catalyst, 1-dodecanol as the initiator, and α-tocopherol as a natural antioxidant. This work combined reaction-time monitoring with structure–property analysis to define the optimum processing window and formulation. In the first stage, samples collected during reactive extrusion were analyzed by differential scanning calorimetry (DSC) and Fourier-transform infrared (FTIR), showing the progressive consumption of l-lactide and the formation of PLA. The main monomer-related signals disappeared after approximately 12 min, while the most favorable thermal response was obtained after 18 min, indicating an optimum balance between conversion and thermal exposure. In the second stage, the effects of α-tocopherol and catalyst:monomer ratio were evaluated by mechanical, thermal, colorimetric, gel permeation chromatography (GPC), and FTIR analyses. For the 1:1000 formulation, α-tocopherol increased the molecular weight to 30,926 g mol–1 and the tensile strength to 34.1 MPa while also enhancing crystallinity and preserving a lighter, less yellow appearance. Among the antioxidant-containing samples, the 1:1000 catalyst:monomer ratio provided the best overall balance between conversion, molecular weight, mechanical performance, and thermal behavior. FTIR confirmed successful PLA formation in the optimized formulations, whereas the 1:5000 sample retained lactide-related bands, consistent with incomplete conversion and inferior properties. These results demonstrate that reactive extrusion is a viable solvent-free route for PLA synthesis when residence time, natural antioxidant stabilization, and catalyst loading are jointly optimized.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Enhanced properties of methyl hydroxyethyl cellulose films with arabinoxylans-rich extract from brewer's spent grain

  • Rojas-Lema, Sandra
  • Mellinas-Ciller, Ana-Cristina
  • Jiménez, Alfonso
  • Garrigós, María del Carmen
  • Garcia-Garcia, Daniel
  • Balart, Rafael
  • Garrigós, María del Carmen|||/items/e102a891-6551-4c12-a4f0-f84d26eacd65
  • Jiménez, Alfonso|||/items/bbdcc026-8576-4bf4-95b9-40453b9ff3ec
  • Mellinas-Ciller, Ana-Cristina|||/items/8f6577ab-b8f1-410d-9d1e-fa3fbf1b7f01
Environmentally friendly methyl hydroxyethyl cellulose (MHEC)-based films added with different amounts (10–30 wt.%) of an arabinoxylans-rich extract (AxRE) obtained from brewer's spent grain (BSG) were developed by the solvent casting method. Some decrease in mechanical properties of films was shown with increasing AxRE content. Addition of AxRE led to a decrease in tensile strength to 23.0–33.7 MPa which are typical of commodity plastics used in the packaging industry. AxRE increased the thermal stability of MHEC-based films, as evidenced by a slight increase in melting point observed through differential scanning calorimetry (DSC) together with a delay in the thermodegradation profile obtained by thermogravimetric analysis (TGA), with onset degradation temperatures above 300 °C for all compositions. Additionally, films with AxRE showed higher hydrophobic behavior, increasing water contact angle from 58.6° (neat MHEC) up to 67.8° for films containing 20 wt.%-AxRE and a decreasing in the moisture content of MHEC films (5.6 %) to 4.2 % for films containing 10 wt.%-AxRE. Interestingly, the arabinoxylans-rich extract significantly increased the antioxidant activity of MHEC-based films with values up to 50 % of 2,2-diphenyl-1-picrylhydrazyl (DPPH) inhibition in films with 20 wt.%-AxRE. The obtained films show potential for active packaging, given that they have demonstrated to provide important antioxidant activity.