Pasar al contenido principal

VALORIZACION DE CO2 MEDIANTE PROCESOS CATALITICOS Y TERMOFOTOCATALITICOS: REDUCCION DE EMISIONES Y OBTENCION DE METANO Y OTROS HIDROCARBUROS LIGEROS

PID2020-119946RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE SEVILLA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multifunctional Heterogeneous Cobalt Catalyst for the One-Pot Synthesis of Benzimidazoles by Reductive Coupling of Dinitroarenes with Aldehydes in Water

  • Río-Rodríguez, José Luis del
  • Chinchilla, Lidia E.
  • Holgado, J.P.
  • Villar-García, Ignacio
  • Pérez Dieste, Virginia
  • Calvino, José Juan
  • Gutiérrez-Tarriño, Silvia
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] The endeavor of sustainable chemistry has led to significant advancements in green methodologies aimed at minimizing environmental impact while maximizing efficiency. Herein, a straightforward synthesis of benzimidazoles by reductive coupling of o-dinitroarenes with aldehydes is reported for the first time in aqueous media while using a non-noble metal catalyst. This work demonstrates that the combination of nitrogen and phosphorous ligands in the synthesis of supported heteroatomincorporated Co nanoparticles is crucial for obtaining the desired benzimidazoles. The process achieves >99% conversion, >99% chemoselectivity and stability for the reduction of dinitroarenes using water as the solvent and hydrogen as the reductant under mild reaction conditions. The robustness of the catalyst has been investigated using several advanced techniques such as HRTEM, HAADF-STEM, XEDS, EELS, and NAP-XPS. In fact, we have shown that the introduction of N and P dopants prevents metal leaching and the sintering of the cobalt nanoparticles. Finally, to explore the general catalytic performance, a wide range of substituted dinitroarenes and benzaldehydes were evaluated, yielding benzimidazoles with competitive and scalable results, including MBIB (94% yield), which is a compound of pharmaceutical interest., Financial support by Severo Ochoa centre of excellence program (CEX2021-001230-S) is gratefully acknowledged. The authors thank the financial support from the Spanish Government (PID2022-140111OB-I00, PID2020-113006-RB-I00, TED2021-130191B-C41 and TED2021-130191B-C44, PID2020-119946RB-I00, funded by MCIN/AEI/ 10.13039/501100011033 and European Union NextGenerationEU/PRTR). This study forms part of the Advanced Materials programme and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047). In addition, this work has received funding from the European Union s Horizon 2020 research and innovation program under grant agreement No 101022507. J.L.R.-R. thanks the MCIU for his FPU PhD contract FPU21/02562. SGT thanks the Universitat Politècnica de València for her postdoctoral contract PAID-10-23. IJVG would like to acknowledge OSMIBatt - CNS2022-135285 for funding. HR-STEM studies were performed at the DME-UCA node of the ELECMI Spanish Unique Infrastructure (ICTS) for Electron Microscopy of Materials. Some of these experiments were performed at CIRCE (beamtime 2022096991) beamline at ALBA Synchrotron with the collaboration of ALBA staff.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Developing and understanding Leaching-Resistant cobalt nanoparticles via N/P incorporation for liquid phase hydroformylation

  • Galdeano-Ruano, Carmen Piedad
  • Lopes, Christian W.
  • Mazarío, Jaime
  • Chinchilla, Lidia E.
  • Agostini, Giovanni
  • Calvino, JJ
  • Holgado, Juan P.
  • Rodriguez-Castellon, Enrique
  • Roldan, Alberto
  • Gutiérrez-Tarriño, Silvia
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] The ultimate target in heterogeneous catalysis is the achievement of robust, resilient and highly efficient materials capable of resisting industrial reaction conditions. Pursuing that goal in liquid -phase hydroformylation poses a unique challenge due to carbon monoxide -induced metal carbonyl species formation, which is directly related to the formation of active homogeneous catalysts by metal leaching. Herein, supported heteroatomincorporated (P and N) Co nanoparticles were developed to enhance the resistance compared with bare Co nanoparticles. The samples underwent characterization using operando XPS, XAS and HR electron microscopy. Overall, P- and N -doped catalysts increased reusability and suppressed leaching. Among the studied catalysts, the one with N as a dopant, CoNx@NC, presents excellent catalytic results for a Co -based catalyst, with a 94% conversion and a selectivity to aldehydes of 80% in only 7.5 h. Even under milder conditions, this catalyst outperformed existing benchmarks in Turnover Numbers (TON) and productivity. In addition, computational simulations provided atomistic insights, shedding light on the remarkable resistance of small Co clusters interacting with N -doped carbon patches., The authors thank the financial support from the Spanish Government (RTI2018-096399-A-I00, PID2022-140111OB-I00, PID2020-113006-RB-I00, TED2021-130191B-C41, TED2021-130756B-C31 and TED2021-130191B-C44, PID2020-119946RB-I00, US-1263455 funded by MCIN/AEI/10.13039/501100011033 and European Union Next- GenerationEU/PRTR) . This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 101022507. HR-STEM studies were performed at the DME-UCA node of the ELECMI Spanish Unique Infrastructure (ICTS) for Electron Microscopy of Materials. We also acknowledge the supercomputing Wales for access to the Hawk HPC facility, part-funded by the European Regional Development Fund via the Welsh Government.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Developing and understanding Leaching-Resistant cobalt nanoparticles via N/P incorporation for liquid phase hydroformylation

  • Galdeano Ruano, Carmen
  • Gutiérrez Tarriño, Silvia
  • Lopes, Christian W.
  • Mazarío, Jaime
  • Chinchilla Reyes, Lidia Esther
  • Agostini, Giovanni
  • Calvino Gámez, José Juan
The ultimate target in heterogeneous catalysis is the achievement of robust, resilient and highly efficient materials capable of resisting industrial reaction conditions. Pursuing that goal in liquid-phase hydroformylation poses a unique challenge due to carbon monoxide-induced metal carbonyl species formation, which is directly related to the formation of active homogeneous catalysts by metal leaching. Herein, supported heteroatomincorporated (P and N) Co nanoparticles were developed to enhance the resistance compared with bare Co nanoparticles. The samples underwent characterization using operando XPS, XAS and HR electron microscopy. Overall, P- and N-doped catalysts increased reusability and suppressed leaching. Among the studied catalysts, the one with N as a dopant, CoNx@NC, presents excellent catalytic results for a Co-based catalyst, with a 94% conversion and a selectivity to aldehydes of 80% in only 7.5 h. Even under milder conditions, this catalyst outperformed existing benchmarks in Turnover Numbers (TON) and productivity. In addition, computational simulations provided atomistic insights, shedding light on the remarkable resistance of small Co clusters interacting with N-doped carbon patches.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

H2 Photoproduction Efficiency: Implications of the Reaction Mechanism as a Function of the Methanol/Water Mixture

  • Barba-Nieto, Irene
  • Colón, Gerardo
  • Kubacka, Anna
  • Fernández, M.
The influence of the reaction pathway of the sacrificial molecule oxidation to generate hydrogen is here investigated for lean and rich methanol reaction mixtures. Pt-TiO2 powders promoted or not with tin sulfide were used as catalysts. With the help of in situ infrared experiments under reaction conditions, methanol evolution was shown to take place by hole-related oxidation steps, with alkoxy and carbon-centered species as key radical species. The study analyzed quantitatively the fate and chemical use of the photons absorbed by the solids with the help of the quantum efficiency and the useful fraction of photons observables. Within this framework, the role of the sulfide component to promote photoactivity is interpreted, braiding chemical and photonic information., Authors are thankful to MCIN/AEI/10.13039/501100011033 (Spain) for supporting the work carried out through the PID2019-105490RB-C31 and PID2020-119946RB-I00 grants. Financial support from the EU FEDER and Junta de Andalucía through P20-00156 I + D + i project is also acknowledged. I.B.-N. would like to thank MCIN/AEI/10.13039/501100011033 for an FPI doctoral fellowship (BES-2017-080069)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cobalt Stabilization through Mesopore Confinement on TiO2 Support for Fischer-Tropsch Reaction

  • Platero, F
  • Todorova, S
  • Aoudjera, L
  • Michelin, L
  • Lebeau, B
  • Blin, J L
  • Holgado, Juan P.
  • Caballero, A.
  • Colón, Gerardo
Cobalt supported on mesostructured TiO2 catalysts has been prepared by a wet-impregnation method. The Co/TiO2 catalytic system showed better catalytic performance after support calcination at 380 °C. Co nanoparticles appeared well distributed along the mesopore channels of TiO2. After reduction pretreatment and reaction, a drastic structural change leads to mesopore structure collapse and the dispersion of the Co nanoparticles on the external surface. Along this complex process, Co species first form discrete nanoparticles inside the pore and then diffuse out as the pore collapses. Through this confinement, a strong metal-support interaction effect is hindered, and highly stable metal active sites lead to better performance for Fischer-Tropsch synthesis reaction toward C5+ products., The authors acknowledge the financial support through Grant PID2020-119946RB-I00 funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by “ERDF A way of making Europe”, by the “European Union”, or by the “European Union NextGenerationEU/PRTR”. We also are thankful for the support from Junta de Andalucía (Consejería de Economía y Conocimiento) through US-1263455 project., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Catalytic performance of cobalt supported onto APTES functionalized TiO2 for Fischer-Tropsch reaction

  • Platero, Francisco
  • Caballero, Alfonso
  • Colón, Gerardo
Cobalt supported TiO2 catalysts have been prepared by wet-impregnation and by immobilization over APTES (3-aminopropyl triethoxysilane) grafted TiO2. Impregnated system showed better catalytic performance after reduction at 260 °C but significant deactivation is observed. On the contrary, functionalized catalyst showed better catalytic performance after reduction at 400 °C with notable stability. We have stated from CO-DRIFT operando analysis that impregnated system is strongly affected by negative SMSI (strong metal-support interaction) upon reduction at higher temperature. While immobilization on APTES hinders the loss of metal active sites. The study of spent catalysts denotes that Co is redispersed in the impregnated catalyst while functionalized trends to form agglomerates., Authors acknowledge the financial support through grant PID2020-119946RB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and, as appropriate, by “ERDF A way of making Europe”, by the “European Union” or by the “European Union NextGenerationEU/PRTR”. We also thank support from Junta de Andalucía (Consejería de Economía y Conocimiento) through US-1263455 project., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Developing and understanding Leaching-Resistant cobalt nanoparticles via N/P incorporation for liquid phase hydroformylation

  • Galdeano-Ruano, Carmen P.
  • Gutiérrez-Tarriño, Silvia
  • Lopes, Christian Wittee
  • Mazarío, Jaime
  • Chinchilla, Lidia E.
  • Agostini, Giovanni
  • Calvino-Gámez, José Juan
  • Holgado, J. P.
  • Rodríguez-Castellón, Enrique
  • Roldán, Alberto
  • Oña-Burgos, Pascual
The ultimate target in heterogeneous catalysis is the achievement of robust, resilient and highly efficient materials capable of resisting industrial reaction conditions. Pursuing that goal in liquid-phase hydroformylation poses a unique challenge due to carbon monoxide-induced metal carbonyl species formation, which is directly related to the formation of active homogeneous catalysts by metal leaching. Herein, supported heteroatom-incorporated (P and N) Co nanoparticles were developed to enhance the resistance compared with bare Co nanoparticles. The samples underwent characterization using operando XPS, XAS and HR electron microscopy. Overall, P- and N-doped catalysts increased reusability and suppressed leaching. Among the studied catalysts, the one with N as a dopant, CoN@NC, presents excellent catalytic results for a Co-based catalyst, with a 94% conversion and a selectivity to aldehydes of 80% in only 7.5 h. Even under milder conditions, this catalyst outperformed existing benchmarks in Turnover Numbers (TON) and productivity. In addition, computational simulations provided atomistic insights, shedding light on the remarkable resistance of small Co clusters interacting with N-doped carbon patches., The authors thank the financial support from the Spanish Government (RTI2018-096399-A-I00, PID2022-140111OB-I00, PID2020-113006-RB-I00, TED2021-130191B-C41, TED2021-130756B-C31 and TED2021-130191B-C44, PID2020-119946RB-I00, US-1263455funded by MCIN/AEI/ 10.13039/501100011033 and European Union NextGenerationEU/PRTR). This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 101022507. HR-STEM studies were performed at the DME-UCA node of the ELECMI Spanish Unique Infrastructure (ICTS) for Electron Microscopy of Materials. We also acknowledge the supercomputing Wales for access to the Hawk HPC facility, part-funded by the European Regional Development Fund via the Welsh Government. Some of these experiments were performed at CLAESS (beamtime 2021095439) and CIRCE (beamtime 2022096991) beamlines at ALBA Synchrotron with the collaboration of ALBA staff (Virginia Pérez, Ignacio Villar and Carlo Marini)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning the co-catalyst loading for the optimization of thermo-photocatalytic hydrogen production over Cu/TiO2

  • Platero, F.
  • Caballero, Alfonso
  • Colón, Gerardo
We have optimized the H production by methanol thermo-photocatalytic reforming in the gas phase using Cu/TiO catalyst by tuning metal loading. Metal co-catalyst has been deposited by means of chemical reduction deposition. We have stated that thermo- and thermo-photocatalytic process leads to a notable H production at 200 ºC. By in-situ FTIR studies we evidenced that formate formation follows a different evolution depending on the reforming experiment. These surface formate would lead to CO formation through dehydration reaction. At higher Cu content the low CO selectivity denote that water-gas-shift reaction would predominate and exalt H yield. Thus, different optimum Cu content is found for each reforming experiment. While for the photocatalytic reforming Cu/TiO (2 wt%) is the best catalyst of the series, we should increase the Cu content to Cu/TiO (5 wt%) to achieve the optimum performance for thermo-photocatalytic reforming of methanol.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

CuOx supported LaCoO<inf>3</inf> perovskite for the photoassisted reverse water gas shift reaction at low temperature

  • Escamilla, María
  • Caballero, Alfonso
  • Colón, Gerardo
CuOx/LaCoO3 systems have been studied for the rWGS reaction under thermal assisted photocatalytic conditions within low temperature range of 180–330 ºC. CuOx species deposited from chemical reduction method over LaCoO3 homogeneously covered the perovskite surface. The reduction pretreatment before reaction leads to the partial Co reduction and the complete reduction of Cu. A significant improvement on CO production has been attained upon Cu incorporation. In addition, upon UV–vis irradiation the CO production is also enhanced. Best results have been obtained for 5 wt% Cu. The highest synergistic effect was observed for the lowest temperature, for which catalytic contribution is negligible. Thus, a good compromise is attained at 300 ºC for which a CO production of 5.45 mmol/h·g and 92 % selectivity, showing a good synergistic effect between thermo and thermo-photocatalytic activity., We acknowledge the financial support from Ministerio de Ciencia e Innovación/FEDER through TED2021-130173B-C43 and PID2020-119946RB-I00 projects funded by MCIN/AEI/ 10.13039/501100011033 and, as appropriate, by “ERDF A way of making Europe”, by the “European Union” or by the “European Union NextGenerationEU/PRTR”, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Improved CO selectivity during CO<inf>2</inf> hydrogenation by bimetallic copper-cobalt supported SBA-15

  • Escamilla, María
  • Caballero, Alfonso
  • Colón, Gerardo
Co-Cu/SBA-15 systems have been studied for the reverse water gas shift (rWGS) reaction within mild temperature range of 250–650 ºC. CuOx and CoOx species at different weight ratios were deposited from wet impregnation method over SBA-15 support. We have stated that pre-reduction treatment before reaction leads to the complete Co and Cu reduction for Co-Cu/SBA systems. A low copper content on Co/SBA system leads to similar CO2 conversion than monometallic Co-catalyst. However, competitive Sabatier side reaction appears almost suppressed. So, upon Cu incorporation a significant improvement on CO yield has been attained with respect to Co/SBA catalyst. Thus, a good compromise is attained at 450 ºC using Co5Cu5/SBA catalyst for which a stable CO2 conversion of 22 % and 97 % CO selectivity has been obtained under lowest H2:CO2 ratio., We acknowledge the financial support from Ministerio de Ciencia, Innovación y Universidades/FEDER through PID2020–119946RB-I00 projects funded by MCIN/AEI/ 10.13039/501100011033 and, as appropriate, by “ERDF A way of making Europe”, by the “European Union” or by the “European Union NextGenerationEU/PRTR”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct biogas methanation at moderate pressure: Mechanism investigation over Ni-based catalysts

  • Giarnieri, Ilenia
  • Chen, Sining
  • Ballesteros-Plata, Daniel
  • Holgado, Juan P.
  • Maluta, Francesco
  • Caballero, Alfonso
  • Ospitali, Francesca
  • Rodríguez-Castellón, Enrique
  • Fornasari, Giuseppe
  • Beale, Andrew M.
  • Benito, Patricia
Direct upgrading of biogas by CO2 methanation aims to produce a gas to be injected into the grid. Operating at moderate pressures favors thermodynamics, but catalyst surface and reaction mechanism under realistic conditions are not well investigated. We study the role of basic and metallic sites on performance and mechanism of clean biogas methanation (CO2/CH4=1/1 v/v) at 1, 5 and 7 bar. Ni/Mg/La/Al hydrotalcite-derived catalysts, with different Ni and La contents, are investigated combining tests and physico-chemical characterization, including quasi-in situ XPS at 7 bar, with CO2-adsorption and methanation DRIFTS at 1 and 7 bar, respectively. An optimized catalyst (6.5 wt% La, 35 wt% Ni) with 3–4 nm Ni0 and balanced basicity, achieves 96 LCH4*gcat−1* h−1 (300°C, 7 bar). DRIFTS confirm catalysts activity experimental trend. Optimizing Ni and La results in higher consumption rates of formate intermediate and sufficient Ni0 sites for CO formation. Increasing pressure to 7 bar promotes CO and m-HCOO reactivity., D.B.P, E.RC. and P.B. thank to the Spanish Ministry of Science and Innovation, project PID2021–126235OB-C32 funded by MCIN/ AEI/10.13039/501100011033 and FEDER funds, and project TED2021–130756B-C31 funded by MCIN/AEI/10.13039/ 501100011033 and by “ERDF A way of making Europe” by the European Union NextGeneration EU/PRTR. J.P.H. and A.C. acknowledge the financial support through Grant PID2020-119946RB-I00 funded by MCIN/AEI/10.13039/ and the support from Junta de Andalucía (Consejería de Economía y Conocimiento) through US-1263455 project. AMB and SC acknowledge access to the UK Catalysis Hub characterization capability enabled through grant EP/RO26939/1., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multifunctional Heterogeneous Cobalt Catalyst for the One-Pot Synthesis of Benzimidazoles by Reductive Coupling of Dinitroarenes with Aldehydes in Water

  • del Río-Rodríguez, José Luis
  • Gutiérrez-Tarriño, S.
  • Chinchilla, Lidia E.
  • Holgado, Juan P.
  • Villar-García, Ignacio J.
  • Pérez-Dieste, Virginia
  • Calvino, José J.
  • Oña-Burgos, Pascual
The endeavor of sustainable chemistry has led to significant advancements in green methodologies aimed at minimizing environmental impact while maximizing efficiency. Herein, a straightforward synthesis of benzimidazoles by reductive coupling of o-dinitroarenes with aldehydes is reported for the first time in aqueous media while using a non-noble metal catalyst. This work demonstrates that the combination of nitrogen and phosphorous ligands in the synthesis of supported heteroatom-incorporated Co nanoparticles is crucial for obtaining the desired benzimidazoles. The process achieves >99 % conversion, >99 % chemoselectivity and stability for the reduction of dinitroarenes using water as the solvent and hydrogen as the reductant under mild reaction conditions. The robustness of the catalyst has been investigated using several advanced techniques such as HRTEM, HAADF-STEM, XEDS, EELS, and NAP-XPS. In fact, we have shown that the introduction of N and P dopants prevents metal leaching and the sintering of the cobalt nanoparticles. Finally, to explore the general catalytic performance, a wide range of substituted dinitroarenes and benzaldehydes were evaluated, yielding benzimidazoles with competitive and scalable results, including MBIB (94 % yield), which is a compound of pharmaceutical interest., Financial support by Severo Ochoa centre of excellence program (CEX2021-001230-S) is gratefully acknowledged. The authors thank the financial support from the Spanish Government (PID2022-140111OB-I00, PID2020-113006-RB-I00, TED2021-130191B-C41 and TED2021-130191B-C44, PID2020-119946RB-I00, funded by MCIN/AEI/ 10.13039/501100011033 and European Union NextGenerationEU/PRTR). This study forms part of the Advanced Materials programme and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047). In addition, this work has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 101022507. J.L.R.-R. thanks the MCIU for his FPU PhD contract FPU21/02562. SGT thanks the Universitat Politècnica de València for her postdoctoral contract PAID-10-23. IJVG would like to acknowledge OSMIBatt - CNS2022-135285 for funding. HR-STEM studies were performed at the DME-UCA node of the ELECMI Spanish Unique Infrastructure (ICTS) for Electron Microscopy of Materials. Some of these experiments were performed at CIRCE (beamtime 2022096991) beamline at ALBA Synchrotron with the collaboration of ALBA staff.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multifunctional Heterogeneous Cobalt Catalyst for the One-Pot Synthesis of Benzimidazoles by Reductive Coupling of Dinitroarenes with Aldehydes in Water

  • Del Río-Rodríguez, José Luis
  • Gutiérrez-Tarriño, Silvia
  • Chinchilla, Lidia E
  • Holgado, Juan Pedro
  • Villar-García, Ignacio J
  • Pérez-Dieste, Virginia
  • Calvino, Jose J
  • Oña-Burgos, Pascual
The endeavor of sustainable chemistry has led to significant advancements in green methodologies aimed at minimizing environmental impact while maximizing efficiency. Herein, a straightforward synthesis of benzimidazoles by reductive coupling of o-dinitroarenes with aldehydes is reported for the first time in aqueous media while using a non-noble metal catalyst. This work demonstrates that the combination of nitrogen and phosphorous ligands in the synthesis of supported heteroatom-incorporated Co nanoparticles is crucial for obtaining the desired benzimidazoles. The process achieves >99 % conversion, >99 % chemoselectivity and stability for the reduction of dinitroarenes using water as the solvent and hydrogen as the reductant under mild reaction conditions. The robustness of the catalyst has been investigated using several advanced techniques such as HRTEM, HAADF-STEM, XEDS, EELS, and NAP-XPS. In fact, we have shown that the introduction of N and P dopants prevents metal leaching and the sintering of the cobalt nanoparticles. Finally, to explore the general catalytic performance, a wide range of substituted dinitroarenes and benzaldehydes were evaluated, yielding benzimidazoles with competitive and scalable results, including MBIB (94 % yield), which is a compound of pharmaceutical interest., Financial support by Severo Ochoa centre of excellence program (CEX2021-001230-S) is gratefully acknowledged. The authors thank the financial support from the Spanish Government (PID2022-140111OB-I00, PID2020-113006-RB-I00, TED2021-130191B-C41 and TED2021-130191B-C44, PID2020-119946RB-I00, funded by MCIN/AEI/ 10.13039/501100011033 and European Union NextGenerationEU/PRTR). This study forms part of the Advanced Materials programme and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047). In addition, this work has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 101022507. J.L.R.-R. thanks the MCIU for his FPU PhD contract FPU21/02562. SGT thanks the Universitat Politècnica de València for her postdoctoral contract PAID-10-23. IJVG would like to acknowledge OSMIBatt - CNS2022-135285 for funding. HR-STEM studies were performed at the DME-UCA node of the ELECMI Spanish Unique Infrastructure (ICTS) for Electron Microscopy of Materials. Some of these experiments were performed at CIRCE (beamtime 2022096991) beamline at ALBA Synchrotron with the collaboration of ALBA staff., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

TiO2-modified bentonite as a cost-effective support for nickel-based catalysts in dry reforming of methane

  • Boudiaf, Meriem
  • Holgado, Juan P.
  • Halliche, Djamila
  • Caballero, Alfonso
The potential of TiO2-modified bentonite as a cost-effective support for nickel-based catalysts in the dry reforming of methane (DRM) is highlighted. The comparison of a nickel catalyst supported on natural bentonite and one prepared on TiO2-modified bentonite revealed a significantly different behavior between the two catalysts under diluted and concentrated DRM reaction conditions. The unmodified bentonite catalyst, 15Ni/Na-Bent, exhibits high activity under diluted conditions (20CH4:20CO2:60He) but deactivates quickly under concentrated DRM conditions (40CH4:40CO2:20He). On the other hand, 15Ni/TiO2-Bent is less active at diluted conditions but demonstrates superior stability and activity in concentrated conditions. In situ XPS analysis of the O 1s, Al 2p, Si 2p, and Ti 2p regions of the calcined, reduced, and post-DRM samples revealed that TiO2 stabilizes the clay structure and prevents nickel reoxidation. The formation of TiO2-x species after reduction creates oxygen vacancies that trap oxidizing species in the reaction medium, thus limiting nickel reoxidation and reducing carbon deposition on the surface. Moreover, these TiO2-x species migrate to the nickel surface, forming a thin protective layer that partially encapsulates the nickel, improving metal–support interactions and providing resistance against sintering and reoxidation. In addition to XPS spectroscopy, which provided insights into the nature of the metal–support interactions in the 15Ni/Na-Bent and 15Ni/TiO2-Bent catalysts, the materials were also characterized using XRF, XRD, SEM, BET, TPR-H2, and Raman spectroscopy. These techniques offered complementary structural, textural, and morphological information, leading to a more comprehensive understanding of the catalysts’ physicochemical properties., This research was funded by Spanish Junta de Andalucia–Consejería de Economía y Conocimiento and Ministerio de Ciencia for grants US-1263455 (PID2020-119946RB-I00 and ENE2017-88818-C2-1-R, PID2020-119946RB-I00). Financial funding for the internship carried out at Instituto de Ciencia de Materiales de Sevilla (www.icmse.csic.es) by Meriem Boudiaf was granted by the University of Science and Technology Houari Boumediene (USTHB)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In situ XAS and NAPXPS investigation of the structural evolution of NiCo particles during Dry and Steam Reforming of Methane

  • Pereñíguez, Rosa
  • González-Delacruz, V.M.
  • Holgado, Juan P.
  • Caballero, Alfonso
Catalysts based on nickel and/or cobalt supported on lanthanum oxide were examined under in situ conditions using X-ray absorption spectroscopy (XAS) and near-ambient pressure X-ray photoelectron spectroscopy (NAPXPS), with a focus on their performance in methane reforming. These catalysts were synthesized using a method known as “Solid Phase Crystallization” (SPC), where the precursor is LaNi1-xCoxO3 with a perovskite structure. This structure presents a general formula ABO3, and, in our systems, Ni and Co are uniformly embedded within the perovskite lattice in the B position. Upon reduction, the perovskite-based system transforms into an active catalytic phase, Ni1-xCox/La2O3, which can revert to the original perovskite phase upon high-temperature oxidation. The perovskite-type oxides exhibit remarkable regenerating properties that can be exploited for catalytic applications. This cycle of reduction and re-oxidation points to an inherent regeneration mechanism of the catalyst, driven by reversible modifications in the B-site metal centers. The in situ analysis revealed the formation of NiCo particles after reduction, where nickel appears to play a protective role by shielding cobalt from oxidation. This effect does not translate into significant enhancements in catalytic efficiency, with the bimetallic material displaying performance that lies between that of the individual Ni/La2O3 and Co/La2O3. NAPXPS measurements under reducing environments, combined with post-reduction STEM observations, indicate the presence of two distinct types of NiCo nanostructures. One exhibits a uniform NiCo alloy intimately mixed with the La2O3 support. The other shows a core-shell like configuration, characterized by cobalt enrichment at the core and nickel predominance at the surface (Co@Ni), both components being partially covered by lanthanum oxide., Authors acknowledge the financial support through projects: PID2024-160864OB-I00, funded by MICIU/AEI/ 10.13039/501100011033 and FSE+ and PID2020-119946RB-I00 funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by “ERDF A way of making Europe”, by the “European Union”. We also thank the support from Junta de Andalucía (Consejería de Economía y Conocimiento) through the US-1263455 project. We also thank the staff of the BM25 beamline at ESRF (Grenoble, France) and the U49/2-PGM1 beamline at BESSY II (Berlin, Germany) for funding and helping with the XAS and NAPXPS experiments., Peer reviewed