Pasar al contenido principal

PROCESOS TERMO-FOTO-CATALITICOS

PID2019-105490RB-C31

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

H2 Photoproduction Efficiency: Implications of the Reaction Mechanism as a Function of the Methanol/Water Mixture

  • Barba-Nieto, Irene
  • Colón, Gerardo
  • Kubacka, Anna
  • Fernández, M.
The influence of the reaction pathway of the sacrificial molecule oxidation to generate hydrogen is here investigated for lean and rich methanol reaction mixtures. Pt-TiO2 powders promoted or not with tin sulfide were used as catalysts. With the help of in situ infrared experiments under reaction conditions, methanol evolution was shown to take place by hole-related oxidation steps, with alkoxy and carbon-centered species as key radical species. The study analyzed quantitatively the fate and chemical use of the photons absorbed by the solids with the help of the quantum efficiency and the useful fraction of photons observables. Within this framework, the role of the sulfide component to promote photoactivity is interpreted, braiding chemical and photonic information., Authors are thankful to MCIN/AEI/10.13039/501100011033 (Spain) for supporting the work carried out through the PID2019-105490RB-C31 and PID2020-119946RB-I00 grants. Financial support from the EU FEDER and Junta de Andalucía through P20-00156 I + D + i project is also acknowledged. I.B.-N. would like to thank MCIN/AEI/10.13039/501100011033 for an FPI doctoral fellowship (BES-2017-080069)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metabolomics reveals synergy between Ag and g-C3N4 in Ag/g-C3N4 composite photocatalysts: a unique feature among Ag-doped biocidal materials

  • Kubacka, Anna
  • Rojo, David
  • Muñoz-Batista, Mario J.
  • Barbas, Coral
  • Fernández García, Marcos
  • Ferrer, Manuel
[EN] Introduction: The silver/graphitic carbon nitride (Ag/g-CN) composite system exerts biocidal activity against the pathogenic bacterium Escherichia coli 1337-H that is stronger than that of well-known silver and titanium oxide (TiO)-based composites. However, whether the Ag/g-CN composite system has biocidal properties that the parent components do or do not have as separate chemical entities and whether they differ from those in Ag/TiO composite photocatalysts have not been clarified. Objective: We investigated the chemical (cooperative charge handling and electronic properties) and biological (metabolic) effects exerted by the addition of Ag to g-CN and to TiO. Methods: In this work, we undertook metabolome-wide analysis by liquid chromatography-electrospray ionization-quadrupole-time of flight-mass spectrometry to compare the metabolite profiles of untreated E. coli 1337-H cells or those subjected to disinfection with Ag, g-CN, 2Ag/g-CN, TiO and 2Ag/TiO. Results: While Ag or g-CN moderately affected microbial metabolism according to the mean of the altered metabolites, multiple cell systems contributing to rapid cell death were immediately affected by the light-triggered radical species produced when Ag and g-CN were as xAg/g-CN The effects include drastically reduced production of small metabolites essential for detoxifying reactive oxygen species and those that regulate DNA replication fidelity, cell morphology and energy status. These biological consequences were different from those caused by Ag/TiO-based biocides, demonstrating the uniqueness of the Ag/g-CN system. Conclusions: Our results support the idea that the unique Ag/g-CN biocidal properties are based on synergistic action and reveal new directions for designing future photocatalysts for use in disinfection and microbial control. Graphical abstract: [Figure not available: see fulltext.], Financial support by Fundación General CSIC (programa ComFuturo) and AEI (PID2019-105490RB-C31) is acknowledged. C.B. and D.R. acknowledge funding from the Ministry of Science, Innovation and Universities (RTI2018-095166-B-I00), Data availability The mass spectrometry metabolomics data were deposited in the MetaboLights repository with the dataset identifer MTBLS1771 (www.ebi.ac.uk/metabolights/MTBLS1771)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pt-Ni contact engineering in carbon nitride based photocatalysts for hydrogen production

  • Sayago-Carro, Rocío
  • Piqueras-Pérez, Pablo
  • Du, Ruifeng
  • Li, Junshan
  • Yu, Jing
  • Arbiol, Jordi
  • Kubacka, Anna
  • Cabot, Andreu
  • Fernández García, Marcos
The effect of a binary PtNi co-catalyst supported on graphitic carbon nitride nanosheets is studied in the photo-production of hydrogen from methanol:water mixtures. The physicochemical analysis provides evidence that the carbon nitride support allows the formation of highly dispersed PtNi nanoparticles with an average composition of Pt 85 % Ni 15 %. The binary system outperforms the monometallic Pt and Ni counterparts and renders an extraordinary quantum efficiency of 8.8 % for hydrogen photo-production. The formation of a PtNi alloy, with a Pt-enriched surface and electronic properties influenced by the heterometallic contact, provides high and stable activity, mostly as a consequence of the effects that the co-catalyst exerts on the charge carrier handling capability of the solid., The authors would like to thank financial support by rants PID2019-105490RB-C31 and PID2019-105490RB-C32 funded by MCIN/AEI/10.13039/501100011033 (Spain) and, as appropriate, by “ERDF A way of making Europe”, by the “European Union”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Promoting H2 photoproduction of TiO2-based materials by surface decoration with Pt nanoparticles and SnS2 nanoplatelets

  • Barba-Nieto, Irene
  • Christoforidis, Konstantinos C.
  • Fernández García, Marcos
  • Kubacka, Anna
The production of hydrogen from the photoreforming of sacrificial alcohols was essayed using an anatase-based ternary system having Pt nanoparticles and SnS<inf>2</inf> nanoplatelets at the surface of the oxide support. Contact between phases was optimized to achieve optimum functional properties under UV and visible illumination, providing the basis for an excellent profit of solar light as measured by the evaluation of the quantum efficiency of the process. The study of the charge carrier fate using photoluminescence and the reactants under reaction conditions using infrared spectroscopy demonstrated that the outstanding photoactivity is connected with the occurrence of multiple cooperative effects between the components of the ternary system, taking place under all (UV and visible) illumination conditions and: i) facilitating charge carrier separation as well as ii) driving the evolution of the carbon-containing intermediates and concomitant hydrogen production. © 2020 Elsevier B.V., We are thankful to AEI (Spain) for supporting the work carried out through the ENE2016-77798-C4-1-R and PID2019-105490RB-C31 grants. I. B.-N. thanks MINECO for a FPI doctoral fellowship (BES-2017-080069). M.F.-G. acknowledges the fruitful general discussion carried out with Prof. F. Fernández Martín., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermo-photo production of hydrogen using ternary Pt-CeO2-TiO2 catalysts: A spectroscopic and mechanistic study

  • Caudillo-Flores, Uriel
  • Barba-Nieto, Irene
  • Muñoz-Batista, Mario J.
  • Motta Meira, D.
  • Fernández García, Marcos
  • Kubacka, Anna
The gas phase thermo-photo production of hydrogen from methanol:water mixtures was tested using platinum ceria-titania ternary solids. This contribution focusses on the analysis of the role of ceria and the usefulness of combining heat and light sources in order to boost catalytic activity. To this end, we provide a quantitative assessment of thermo-photo activity as well as a detailed characterization of the catalytic solids with emphasis in the use of in-situ X-ray absorption and infrared spectroscopies. The adequate combination of components in the platinum ceria-titania ternary system renders highly active and stable catalysts, maximizing hydrogen production (rate of ca. 45 mmol g-1h−1) for a solid having a 1/2.5 wt% of platinum/ceria supported on titania. The characterization shows that this occurs through a synergetic effect among components of the solids and takes place with a critical role of defects located at the ceria-titania interface and the noble metal component. The cooperative action between components promotes the evolution of specific carbon-containing intermediates (related to the step-wise hole-triggered oxidation of the methanol molecule, decarbonylation of intermediates and the water gas shift) and the concomitant production of hydrogen. © 2021 The Author(s), Authors are thankful to “Ministerio de Ciencia, Innovación y Universidades” (Spain) for supporting the work carried out through the PID2019-105490RB-C31 grant. ESRF (BM23 beamline) synchrotron and staff (Drs. G. Agostini and O. Mathon) are also thanked for the provision of beamtime as well as the supply of reference materials/spectra. The support by CONACyT, Mexico (SENER-CONACyT 117373) is also acknowledged by U. C.-F. I. B.-N. thanks MINECO for a FPI doctoral fellowship (BES-2017-080069). MF-G acknowledges Prof. F. Fernández-Martín for fruitful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Recent progress in the quantitative assessment and interpretation of photoactivity

  • Caudillo-Flores, Uriel
  • Muñoz-Batista, Mario J.
  • Fernández García, Marcos
  • Kubacka, Anna
The development of the photo-catalysis field is limited by a deficient quantitative assessment of photo-activity. The interplay between mass and momentum transport together with radiative transfer phenomena taking place at any photo-catalytic reaction or process makes complex such quantitative assessment. To reach this goal, the review studies the measurement, meaning, and analysis of three types of observables. The first family of observables has the reaction rate and closely connected observables as the turnover frequency as central pieces. The second family owns the so-called efficiency observables, starting from the photonic yield and quantum efficiency of the reaction and ending in the global efficiency of the process. Finally, the review studies kinetic constant observables. The contribution focusses on most rencet contribution analyzing these observables in terms of their (adequate) measurement conditions and physico-chemical interpretation, in order to unveil their full potential in the context of the photo-catalysis field. © 2022 The Author(s). Published with license by Taylor & Francis Group, LLC., Authors acknowledge the financial support through grant PID2019-105490RB-C31 funded byMCIN/AEI/10.13039/501100011033 and, as appropriate, by “ERDF A way of makingEurope,”by the “European Union” The support by CONACyT, Mexico (SENER-CONACyT117373) and UGR (PPJIA2019-09) is also acknowledged by U. C.-F. and M. J. M.-B., respec-tively. All authors thanks to I. Barba-Nieto, M. N. Gómez-Cerezo, and O. Fontelles-Carcellerfor the work carried out to support scientific activities of the authors. M. F.-G. is fully indebtedto Prof. F. Fernández-Martín for general discussions, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

(NH4)4[NiMo6O24H6].5H2O / g-C3N4 materials for selective photo-oxidation of C[sbnd]O and C[dbnd]C bonds

  • Caudillo-Flores, Uriel
  • Ansari, Fahimeh
  • Bachiller-Baeza, B.
  • Colón, Gerardo
  • Fernández García, Marcos
  • Kubacka, Anna
Novel composite photo-catalysts having (NH4)4[NiMo6O24H6]·5H2O Polyoxometalate (POM) species deposited over g-C3N4 are synthesized. Materials were characterized through a multitechnique approach showing the stability of the carbon nitride component both through the synthesis process and under reaction. Contrarily, the POM component evolves under reaction conditions to maximize the interaction with the support. Such a behavior renders, as measured by the quantum efficiency, highly active photo-catalysts in the photo-oxidation of 2-propanol and styrene both under UV and sunlight illumination, setting up the basis for a green catalytic process. The material having a 4 wt. % POM showed improved activity with respect to both parent constituents but also higher selectivity to the partial oxidation of the alcohol and the aromatic hydrocarbon to generate added value chemical compounds. A multitechnique approach investigating charge carrier fate demonstrates the key role played by the interaction between components to promote activity and selectivity in selective oxidation reactions., Financial support from AEI (Spain; ENE2016-77798-C4-1-R and PID2019-105490RB-C31 grants), CSIC and the Secretaria de Ciencia Tecnología e Innovacion of CDMX (SECTEI, Mexico) are fully tanked. M. F.-G. acknowledges fruitful general discussions with Prof. F. Fernández-Martín. F. A. thanks Iran Government for a fellowship allowing a short-time stay at the Institute of Catálisis y Petrolequímica, CSIC, Spain, Peer reviewed
Docta Complutense
Publicación Artículo científico (JournalArticle)

PdCu deposited alloys on TiO2 for hydrogen photo-production

  • Gómez Cerezo, María Natividad
  • Sayago Carro, Rocío
  • Cortés Bazo, Alejandro
  • Fernández García, Marcos
  • Kubacka, Anna
The role of a Pd-based co-catalyst supported on a high surface area anatase powder is analyzed for the photo-production of hydrogen from methanol:water mixtures. The co-catalyst chemical composition was modified by replacing palladium atoms with copper. The preparation method renders alloyed particles with a primary particle size in the 5–6 nm interval. A Pd:Cu 3:1 ratio promotes strongly the activity of the noble metal. According to the quantum efficiency parameter, the Pd:Cu 3:1 alloy increases by ca. 2 the activity of the monometallic Pd counterpart. The analysis of the photoactivity points out that alloying does not affect positively charge recombination and handling.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Pt-Ni contact engineering in carbon nitride based photocatalysts for hydrogen production

  • Sayago-Carro, Rocío|||0000-0002-8662-9090
  • Piqueras-Pérez, Pablo
  • Du, Ruifeng
  • Li, Junshan|||0000-0002-1482-1972
  • Yu, Jing|||0000-0002-7620-745X
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Kubacka, Anna
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Fernández-García, Marcos|||0000-0002-9987-0289
The effect of a binary PtNi co-catalyst supported on graphitic carbon nitride nanosheets is studied in the photo-production of hydrogen from methanol:water mixtures. The physicochemical analysis provides evidence that the carbon nitride support allows the formation of highly dispersed PtNi nanoparticles with an average composition of Pt 85 % Ni 15 %. The binary system outperforms the monometallic Pt and Ni counterparts and renders an extraordinary quantum efficiency of 8.8 % for hydrogen photo-production. The formation of a PtNi alloy, with a Pt-enriched surface and electronic properties influenced by the heterometallic contact, provides high and stable activity, mostly as a consequence of the effects that the co-catalyst exerts on the charge carrier handling capability of the solid.