Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Surface-State-Regulated Product Distribution in Photothermal CO2 Hydrogenation Over MXene-Based S-Scheme Catalyst

  • Kruger, Dawid Daniël
  • Cabrero-Antonino, Maria
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Osella, Silvio
  • Xu, Feiyan
  • Yu, Jiaguo
[EN] The rational design of heterostructured photocatalysts that simultaneously enable efficient carrier separation, photothermal synergy, and controllable reaction pathways is crucial for advancing CO2 conversion. Here, a Ni/Ti3C2Clx MXene heterojunction is synthesized via Lewis acid molten-salt etching, featuring ultrathin Ni platelets strongly anchored to the MXene substrate through interfacial TiNi3 bonding. This architecture establishes an S-scheme charge transfer pathway, as evidenced by in situ irradiated X-ray photoelectron and X-ray absorption spectroscopy, which confirm efficient carrier transfer and separation, while femtosecond transient absorption spectroscopy reveals ultrafast interfacial dynamics. Under photothermal conditions, the cooperative interplay of metallic Ni, surface NiOx, and the conductive MXene substrate couples directional charge migration with thermally assisted molecular activation and barrier lowering, thereby enabling regulated CO2 hydrogenation product distribution between CH4 and CH3OH. Density functional theory demonstrates that surface-state evolution, rather than simple oxidation degree, modulates adsorption energetics and alters the relative barriers of CH4 and CH3OH pathways, such that moderately oxidized Ni-NiOx interfacial ensembles favour methanol forming intermediates, whereas extensive oxidation suppresses CH3OH formation. Collectively, these findings demonstrate a robust strategy for exploiting MXene-based heterojunction interfaces in photothermal catalysis and underscore the pivotal role of surface state regulated reaction pathways in steering product distribution during CO2 hydrogenation., This work was supported by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PID2024-161014NB-I00 funded by MCIN/AEI/10.13039/501100011033), Generalitat Valenciana (CIPROM/2024/071 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1) and European Commission through the ERC Adv. Grant 101141466 DISCOVERY is gratefully acknowledged. D.D.K. gratefully acknowledges aid contract PRE2022-102036, financed by MCIN/AEI/10.13039/501100011033 and by the ESF +. S.O. Additional funding has been given by the National Key Research and Development Program of China (2022YFB3803600), the National Natural Science Foundation of China (U22A20147, 22261142666, 51932007, 22238009, 22361142704, and 52502372), the Natural Science Foundation of Hubei Province of China (2022CFA001 and 2025AFB018), and the National Postdoctoral Program for Innovative Talents (BX20240341),
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Phosphate-Terminated Nb2C MXene as Efficient Catalyst for the Transformation of Glucose Into 5-Hydroxymethylfurfural With 3077 h-1 Turnover Frequency

  • Raya-Barón, Álvaro
  • Romero-Salicio, Elena
  • Tian, Liang|||0000-0002-3801-653X
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • BOGDAN COJOCARU
  • Parvulescu, Vasile
[EN] The production of 5-hydroxymethylfurfural (HMF) from glucose is a reaction of considerable interest in biomass conversion into platform molecules. This reaction suffers, however, in general from low selectivity and the generation of undesirable polymeric byproducts (humins). Herein, we describe the preparation of phosphate-terminated Nb2C MXene (Nb2C-PO4) as a novel heterogenous water-tolerant acid catalyst, able to afford high yields of HMF, while minimizing humin formation. The phosphate-modified Nb2C has been extensively characterized (X-ray diffractometry (XRD), high resolution transmission electron microscopy (HRTEM), scanning transmission electron microscopy (STEM-EDS), X-ray photoelectron spectroscopy (XPS)) in order to prove the retention of the MXene structure and the presence of phosphate groups on the surface, and the acid-base properties have been assessed by NH3- and CO2-TPD and pyridine-DRIFTS. Apparently, the effect of phosphate is to mask less selective acid sites, while the remaining ones are more selective to promote HMF formation from glucose. This proposal is also supported by the contrasting behavior of pyridine and 2,6-di-tert-butylpyridine as quenchers of acid sites. Under optimized conditions, 64% yield of HMF can be obtained at 150 degrees C in a monophasic THF/water mixture, using a high glucose concentration (5% w/w) and a low Nb2C-PO4 loading (S/C = 10 w/w), reaching a TOF of 3077 h-1., This work was supported by Agencia Estatal de Investigacion (CEX-2021-01230-S and PID2024-161014 NB-I00), Generalitat Valenciana (CIPROM2024-071) and European Commission (ERC Adv. Grant 101141466 DISCOVERY).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

2D/2D MOF/MXene Schottky Junction: Prolonged Carrier Lifetime and Enhanced Hydrogen Evolution Efficiency

  • Cabrero-Antonino, Maria
  • Uscategui-Linares, Andrés Felipe|||0000-0003-2448-9966
  • Ramírez-Grau, Rubén
  • García-Aznar, Pablo|||0000-0003-0586-0037
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
  • Goberna-Ferrón, Sara|||0000-0002-3306-3791
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • Zhang, Jianjun
  • Yu, Jiaguo
  • Xu, Feiyan
[EN] Harnessing sunlight for photocatalytic overall water splitting offers a sustainable approach to renewable hydrogen (H2) production, addressing global energy and environmental challenges. However, the development of efficient and durable photocatalysts remains a significant obstacle. This study introduces the design and performance of a 2D/2D Schottky heterojunction composed of Cu2[CuTCPP] MOF of nanometric size and exfoliated Ti3C2 MXene for visible-light-driven overall water splitting. By leveraging the extensive interfacial contact between the two components, an interfacial electric field is generated, promoting efficient charge migration and prolonging carrier lifetimes, as confirmed through systematic density functional theory simulations, in situ irradiation X-ray photoelectron spectroscopy, femtosecond transient absorption spectroscopy, and X-ray absorption spectroscopy. Ti3C2 MXene, acting as a cocatalyst for photohole transport and accumulation, reduces oxidative degradation and slows catalyst deactivation. The synergistically enhanced light absorption properties of the Cu2[CuTCPP]/Ti3C2 heterojunction result in an impressive H2 evolution rate exceeding 5000 mu mol gcat(-)1, underscoring its potential for next-generation photocatalytic systems in renewable energy applications., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/ 10.13039/501100011033), Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1) and European Commission (ERC Adv. Grant 101141466 DISCOVERY) is gratefully acknowledged. R. R.-G. and J. A. thank the Spanish Ministry of Science and Innovation for a postgraduate scholarship and a Ramon y Cajal research associate contract, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Facile molten salt synthesis of bimetallic NiFe-Ti3C2Tx MXene nano-hybrid as an efficient oxygen evolution electrocatalyst

  • Kruger, Dawid Daniël
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Recio, F. Javier
  • Wlazo, Mateusz
  • Osella, Silvio
[EN] Non-precious metal OER electrocatalysts are critical for developing efficient electrochemical hydrogen production. Recently, MXenes have increasingly been applied as conductive electrocatalyst support materials. Here, an HF-free and scalable one-step synthesis, based on Lewis acid molten salt (LAMS) etching of Ti3AlC2 MAX phase, is employed, varying the Ni/Fe ratio, to optimize a series of bimetallic NixFey-Ti3C2Clx nano-hybrids as precatalysts for OER electrocatalysis. The best performing sample, Ni1Fe1-Ti3C2Clx, has a Ni:Fe ratio of 1:1, with an overpotential at 10 mA cm-2 of 310 mV, and a Tafel slope of 48 mV dec¿1 . Cyclic voltammetry reveals the surface availability of both Ni and Fe species, with the OER activity correlated to the Ni(III)/Ni(II) redox potential. Advanced characterization confirms the formation of nano-structured Ni-Fe alloy intimately bound to the Ti3C2Clx support, as the Fm3¿m or Im3¿m phases, depending on the Ni/Fe ratio employed in the LAMS synthesis. Density functional theory (DFT) calculations suggest that the adsorbate evolution mechanism (AEM) is preferred over the lattice oxygen mechanism (LOM) when either Ni or Fe acts as the active center, with higher activity on the Ni sites. This study demonstrates a facile method for the preparation of nanostructured bimetallic-MXene heterostructures with applications in electrochemical energy conversion., Financial support by the European Commission through the ERC Adv. Grant 101141466 DISCOVERY, the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PID2024-161014 NB-I00 funded by MCIN/AEI/ 10.13039/501100011033), Generalitat Valenciana (CIPROM/2024/071), and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1) is gratefully acknowledged. D.D.K. gratefully acknowledges aid contract PRE2022-102036, financed by MCIN/AEI/10.13039/501100011033 and by the ESF+. S.O. thanks the Polish National Science Centre for funding (grant no. UMO-2023/50/E/ST4/00197).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

In Situ Synthesis of MXene-Perovskite Interfaces in 3D Carbon Catalysts Boosts Aerobic Oxime Oxidation

  • Romero-Salicio, Elena
  • Anouar, Aicha
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
[EN] The development of heterogeneous catalysts for liquid-phase aerobic oxidation is of great interest. Herein, we report the synthesis of 3D porous graphitic carbon spheres incorporating M n+1C n -type MXenes (M = Ti, V, Nb), prepared by delaminating MXene nanosheets in chitosan-based aerogels, followed by pyrolysis. In the case of Nb2C, a heterojunction with a NaNbO3 perovskite forms within the carbon matrix, leading to the highest catalytic performance. This 3D Nb2C/NaNbO3 structure achieved a 100% yield in the aerobic oxidation of cyclohexanone oxime to cyclohexanone within 6 h, with negligible metal leaching. Structural analysis revealed the partial oxidation of Nb2C to NaNbO3 during synthesis, leading to a Nb2C-NaNbO3 heterostructure. Control experiments confirmed that this interface is essential for the high activity, as neither Nb2C nor NaNbO3 alone on the porous carbon matrix reached a similar performance. Mechanistic studies based on hot filtration tests, quenching experiments, and EPR spectroscopy demonstrated that the reaction involves reactive oxygen species, mainly superoxide and hydroperoxyl radicals, generated and acting on the catalyst surface. This work provides a promising strategy for designing efficient and robust MXene-based catalysts for sustainable oxidation processes., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S, PID2024-161014NB-I00 funded by MCIN/AEI/10.13039/501100011033 and center dot HYLIOS CPP2022-010052 / AEI/10.13039/501100011033/ Union Europea NextGenerationEU/PRTR), Generalitat Valenciana (CIPROM/2024/071), and the Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1) and European Commission through the ERC Adv. Grant 101141466 DISCOVERY is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ti3C2 MXene as heterogeneous catalyst for carbodiimides guanylation with over 102 h-1 turnover frequencies

  • Anouar, Aicha
  • Romero-Salicio, Elena
  • García-Aznar, Pablo|||0000-0003-0586-0037
  • Grirrane, Abdessamad|||0000-0001-5388-3554
  • Forneli Rubio, Mª Amparo
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
[EN] A series of Ti3C2 samples has been prepared from Ti3AlC2 by NH4F-HCl etching, followed by subsequent posttreatments, such as DMSO expansion, ultrasound exfoliation, thermal annealing at 500 degrees C, surface modification by ammonium persulfate, tetrabutylammonium hydroxide and hydrochloric acid. These Ti3C2 samples have been tested as heterogeneous catalysts for guanylation of symmetrical carbodiimides by aromatic and secondary aliphatic amines, observing the formation of the corresponding guanidines, accompanied by dialkylureas. The initial reaction rates between N,N'-diisopropylcarbodiimide and p-toluidine correlate linearly with the density of weak strength acid sites of the Ti3C2 sample measured by NH3 thermo-programed desorption. This has led us to propose these weak acid sites as active centers of the reaction. Based on the population of weak acid sites, the estimated turnover numbers and frequencies were calculated to be 101 and 114 h- 1 for the most active Ti3C2 sample. These values rank Ti3C2 among the most active noble metal-free solid guanylation catalysts reported so far. Upon reuse, the Ti3C2 sample undergoes gradual deactivation, characterization of the four-times used Ti3C2 sample indicates that the crystallinity is preserved. Catalyst deactivation derives from deposition of the reaction products on the surface and/or from the increase of the oxygenated surface functional groups upon reuse. Deactivation can be partially reversed by thermal product desorption. DFT calculations indicate that the rate determining step in the reaction mechanism is the cycloaddition between the carbodiimide and the deprotonated toluidine anchored to the Ti3C2 surface. The present results illustrate the potential that MXenes have as solid catalysts for organic reactions, particularly Ti MXenes to promote reactions requiring amine activation, such as the present guanylation reaction., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) , Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1) and European Commission through the ERC Adv. Grant 101141466 DISCOVERY is gratefully acknowledged. Pablo Garcia-Aznarand German Sastre f would like to thank ASIC-UPV and SGAI-CSIC for the use of their computational facilities. We also thank MICIN for the Severo Ochoa Excellence Research Grant.