Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Real-time monitoring of breath biomarkers using magnonic wireless sensor based on magnetic nanoparticles

  • Aguilera, J.D.
  • Arranz, D.
  • Peña, A.
  • Horrillo, Carmen
  • De la Presa, D.
  • Matatagui, D.
8 páginas, 6 figuras, In this paper, an innovative device with gas remote-sensing capability is proposed, which is based on the interaction between magnetic nanoparticles and gases associated with exhaled breath biomarkers that can have a metabolic origin. Magnetite (Fe₃O₄) nanoparticles of around 30 nm have been used. The gas molecules adsorbed on surface modulate the magnetization of the nanoparticles and magnetostatic surface spin waves (MSSW) propagated on an yttrium iron garnet (YIG) thin film are used to detect this modulation by the induced frequency shift. The optimization of the remote gas sensor has been carried out through simulations of a magnetic model. Simulations show the feasibility of developing a high-performance remote sensor by encapsulating the nano- structures in a polytetrafluoroethylene (PTFE) tube and detecting part per million changes in their magnetiza- tion. The results show the possibility of developing new, inexpensive, reusable, contactless magnetic gas sensors employing spin waves as transductor. The developed sensor shows a high sensitivity and selectivity to concen- trations as low as 50 ppm of different breath biomarkers., The authors acknowledge the Spanish Ministry of Science and Innovation for financing the projects RETOS RTI2018-095856-B, RTI2018-095856-B-C22 (AEI/FEDER), RTI2018-095856-B-C21 (AEI/FEDER), PID2021-123112OB-C21 (AEI/FEDER), PDC2022-133039-I00 (AEI/FEDER), Comunidad de Madrid (NANOMAGCOST-CM S2018/NMT-4321 and COST Action CA21101. J.D.A received funding from Next Generation EU, Ministerio de Trabajo y Economía, Comunidad de Madrid, Spain, Programa Investigo from grant 96-UCM-INV. D. M. acknowledges financial support from the Spanish Ministry of Science and Innovation (MCI) through the Ramóon y Cajal grant RYC2021-031166-I. A. P. acknowledges funding from grant PRE2019-0875001234 (MCI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ball milling and annealing effect in structural and magnetic properties of copper ferrite by ceramic synthesis

  • Cobos, Miguel Ángel
  • Jiménez, José Antonio
  • Llorente, Irene
  • Presa, Patricia de la
  • Hernando, Antonio
This study aims to better understand the relationship between the microstructure and magnetic properties of copper ferrite, which is an inverse spinel that present a body-centered tetragonal structure associated with a remarkable Jahn–Teller (JT) effect. For this goal, a sample has been synthesized by the ceramic route from a stoichiometric mixture of high-purity CuO and FeO powders activated mechanically in a high-energy planetary ball mill. This sample was calcined in air furnace at 1000 ºC for 6 h. As synthetized sample with a cubic structure was divided into two parts and one of them was annealed at 650 ºC for 3 h and slowly cooled to room temperature to obtain a pure tetragonal spinel sample. Furthermore, these two samples were subjected to the same processes of severe plastic deformation by milling for up to 70 h and subsequent annealing at temperatures ranging between 300 and 600 ºC to obtain samples with a mixture of phases in different proportions. For the cubic one, there is no change in its structure due to milling, always remaining 100 % cubic, and the evolution in the saturation magnetization was related to the changes in the density of defects present. On the other hand, copper cations are always found in the octahedral sites of spinel with a tetragonal structure. The small decrease in the degree of inversion to 0.95 induced by milling in this sample is capable of breaking the JT distortion, giving rise to the appearance of a cubic phase. This work demonstrates how the structure, microstructure, defects like stacking faults and deformation twins, and degree of inversion of the different phases are related to changes in magnetic properties., This work was supported by the Ministerio de Ciencia e Innovacion de España (Grant IDs. PID2021-123112OB-C21, PDC2022-133039-I00, TED2021-129688B-C21, PID2021-126166OB-I00, PID2022-138332NB-C41).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Beyond conventional characterization: Defect engineering role for sensitivity and selectivity of room-temperature UV-assisted graphene-based NO₂ sensors

  • Peña, Álvaro
  • López-Sánchez, Jesús
  • Sacco, Leandro
  • Vollebregt, Sten
  • Marqués-Marchán, Jorge
  • Horrillo, Carmen
  • Marín, Pilar
  • Matatagui, Daniel
10 páginas, 6 figuras, 1 tabla, The term graphene-based gas sensors may be too broad, as there are many physicochemical differences within the graphene-based materials (GBM) used for chemiresistive gas sensors. These differences condition the sensitivity, selectivity, recovery, and ultimately the sensing performance of these devices towards air pollutants. Continuous ultraviolet irradiation aids in the desorption of gas molecules and enhances sensor performance. Under these conditions, the devices from this work can reliably monitor NO2 and CO at room temperature, below the human-recommended exposure limits, presenting NO2 LoD down to ~20 ppb. By selecting GBMs with different levels of defectivity, which influence gas adsorption dynamics, and through comprehensive charac- terization, including D, D′, D″, 2D, and G Raman bands, graphene-based gas sensors can be tailored to meet specific sensing requirements. This study examines five different non-oxidized GBM to develop tools and gain a deeper understanding of the relationships between GBM properties and their sensing performance. This research introduces a new standard for defect assessment, moving beyond graphene’s D and G Raman band intensity ratio, to facilitate the successful integration of graphene-based gas sensors into everyday applications, such as envi- ronmental monitoring and industrial safety, and potentially impacting other 2D materials, thereby reducing health risks associated with air pollution., Author A. P. received funding from grant PRE2019-0875001234, Ministerio de Ciencia e Innovaci´on (MCIN), Spain. Authors A. P., D. M., P. M., and M-C. H. received funding from project PDC2022-133039- I00 and PID2021-123112OB-C21 from MCIN/AEI/10.13039/ 501100011033, Spain and European Union Next Generation EU/PRTR. D. M. acknowledges financial support from grant RYC2021-031166-I funded by MCIU/AEI/10.13039/501100011033. J. L.-S. acknowledges the financial support from PID2023-151036OA-I00 funded by MCIU/ AEI/10.13039/501100011033 and by the European Union, and from grant RYC2022-035912-I funded by MCIU/AEI/10.13039/ 501100011033 and by the European Social Fund Plus (ESF+). JM thanks the Regional Government of Madrid for the project P2018/NMT- 4321 NANOMAGCOST. M-C. H acknowledges the support from the COST Action CA21101, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modulating the magnetic properties of Fe3C/C encapsulated core/shell nanoparticles for potential prospects in biomedicine

  • Castellano-Soria, A.
  • López-Méndez, R.
  • Espinosa, A.
  • Granados-Miralles, Cecilia
  • Varela, M.
  • Marín, P.
  • Navarro, E.
  • López-Sánchez, Jesús
In the pursuit of alternative and less invasive medical treatments, magnetic nanoparticles (NPs) have gained significant relevance. Iron carbides NPs stand out for their higher saturation magnetizations compared to iron oxides, while maintaining a suitable biocompatibility. In this work, high control is achieved over the composition and morphology of Fe3C/C encapsulated core/shell nanoparticles through fine-tuning of the sol-gel synthesis parameters. Specifically, the impact of decreasing each surfactant concentration added, nt, the same both for oleylamine (ON) and oleic acid (OA), has been explored. A minimum value for such parameter denoted by nt,min. was required to produce pure Fe3C@C NP-composites. For nt < 4 mmol, some minor α-Fe impurities arise, and the effective carburization becomes unstable due to insufficient carbon. The magnetic properties of the materials prepared were optimized by reducing the excess carbon from surfactants, resulting in saturation magnetization values of 86 emu/g. (for pure Fe3C at nt = 5 mmol) and 102 emu/g (for Fe3C and <2 % w.t. of α-Fe impurity at nt = 4 mmol). In view of this, several cytotoxicity studies for different Fe3C@C samples were conducted, exhibiting excellent biocompatibility in cell-based assays, which could lead to potential application at the forefront of biomedical fields. © 2024 The Authors, The work has been supported by the Ministerio de Ciencia e Innovacion (MCINN) through the projects PDC2022-133039-I00, PID2021-123112OB-C21-MICIIN, TED2021-129688B-C21, MAT2015-65445-C2-1-R, MAT2017-86450-C4-1-R, MAT2015-67557-C2-1-P, RTI2018-095856-B-C21, RTI2018-095303-A-C52, PID2020-114192RB-C41, PIE: 2021-60-E-030, PIE: 2010-6-OE-013, PID2021-122980OB-C51, FPI PRE2020-96246 grant (R.L-M.), and Comunidad de Madrid by NANOMAGCOST-CM, S2013/MIT-2850 NANOFRONTMAG, (MAD2D-CM)-UCM3, S2018/NMT-4321 NANOMAGCOST, 2018-T1/IND-1005 (A.E.) and S2022/BMD-7434 ASAP-CM. C.G.-M. acknowledges financial support from grant RYC2021-031181-I funded by MCIN/AEI/10.13039/501100011033 and by the "European Union NextGenerationEU/PRTR". J. L.-S. acknowledges the financial support from Spanish Ministry of Economic Affairs and Digital Transformation through the project PID2021-122980OB-C5 and from grant RYC2022-035912-I funded by MCIU/AEI/10.13039/501100011033 and by the European Social Fund Plus (ESF+). Electron microscopy measurements were carried out at the Centro Nacional de Microscopia Electronica at the Universidad Complutense de Madrid (ICTS ELECMI, UCM). The authors also acknowledge the BM25-SpLine Staff for their valuable help and the provision of the beamline under the projects A25-2-1053 and A25-2-1009., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cost-effective synthesis of stable CoxC@few-layered graphene nanostructures embedded in a carbon matrix

  • Pino-Batlles, Carmen del
  • Serrano Rubio, Aída
  • Castellano-Soria, A.
  • López-Méndez, R.
  • Navarro, E.
  • Marín, P.
  • Espinosa, Ana
  • Carmona, N.
  • López-Sánchez, Jesús
In this study, a two-step surfactant sol-gel strategy is developed to synthesize Co particles with confined sizes in the nanoscale using organic precursors. This approach does not require the use of vacuum techniques or strong reducing atmospheres, making it a simple approach economically attractive. The strategy involves the generation of few-layered graphene shells to provide chemical stability, prevent oxidation and aggregation tendencies. Additionally, the study investigates the use of precursors based on nitrates and acetates, exploring their structural and magnetic properties in densified samples. Remarkably, magnetic properties are competitive for both approaches, with coercivities reaching up to 300 Oe and saturation magnetization of ∼60 and ∼80 emu/g for samples based on nitrates and acetates prepared at 650 °C, respectively. However, it is observed that smaller and more uniformly sized nanoparticles (around ∼10 nm) are obtained with nitrate-based precursors due to an effective ligand decomposition process. Therefore, this chemical approach offers effective nanoscale confinement with intriguing magnetic properties through a cost-effective and reproducible synthesis. © 2024 The Authors, This work has received funding from the Comunidad de Madrid through the project S2018/NMT-4321 NANOMAGCOST and from Ministerio de Ciencia e Innovacion (MICNN) through PID2021- 126323OA-100 and PDC2022-133039-I00. We thank the CLAESS beamline staff for their support during the experiments. A. E. acknowledges the financial support from MICINN (PID2021-127033OB- C21) and Comunidad de Madrid (2018-T1/IND-1005 project). R.L.-M. acknowledges FPI PRE2020-96246 grant under the Severo Ochoa program (CEX2020-001039-S) at IMDEA Nanociencia. A.S. acknowledges financial support from PID2021-124585NB-C33 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe", by Project TED2021-130957B-C51 funded by MCIN/AEI/10.13039/501100011033 and by the "European Union NextGenerationEU/PRTR" and from grant RYC2021-031236-I funded by MCIN/AEI/10.13039/501100011033 and by the "European Union NextGenerationEU/PRTR". J.L.-S. acknowledges financial support from Spanish Ministry of Economic Affairs and Digital Transformation (MINECO) through the project PID2021-122980OB-C51 and from grant RYC2022-035912-I funded by MCIU/AEI/10.13039/501100011033 and by the European Social Fund Plus (ESF + )., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Revealing the impact of ball milling as an intermediate stage in solid-state reaction synthesis of SmFeO3 particles

  • Gouadria, H.
  • López-Sánchez, Jesús
  • Navarro, E.
  • Cobos, M.Á.
  • Castellano-Soria, A.
  • Mnasri, T.
  • Marín, P.
In this work, the impact of milling time on the structural, morphological, and magnetic properties is investigated in SmFeO3 (SFO) powders obtained by solid state reaction. Specifically, the ball milling process is incorporated as an intermediate step during the synthesis and their magnetic properties vary when the samples are milled for 4 and 10 h. Based on X-ray diffraction, the resulting samples crystallized in Pbnm space group, with a slight decrease in crystallite size and cell volume with milling time. These results are also supported by confocal Raman microscopy with a slight shift towards lower wavenumbers. In this sense, magnetic characterization demonstrates a weak ferromagnetic contribution coexisting with the dominant antiferromagnetic order. Butterfly shaped hysteresis loops are observed in both samples for T > 200 K while a single shaped loop is achieved for T < 200 K. Zero field cooled, and field cooled magnetization curves shows a broad maximum centered at 140 K and bifurcation of the two curves because of the competing interaction between the Sm+3 and Fe3+ ions into the SFO crystal structure. Interestingly, exchange bias (EB) effect is found up to 200 K with a field cool of 20 kOe for both samples. The existence of Fe–Fe, Fe–Sm, and Sm–Sm interactions in a cluster glass state induced by ball milling processes might be the main cause of such EB effect. © 2024 Elsevier B.V., P. M. received funding from project PDC2022-133039-I00 from MCIN/AEI/10.13039/501100011033, Spain and European Union Next Generation EU/PRTR. J. L.-S. acknowledges the financial support from PID2023-151036OA-I00 funded by MICIU/AEI/10.13039/501100011033 and by the European Union, and from grant RYC2022-035912-I funded by MCIU/AEI/10.13039/501100011033 and by the European Social Fund Plus (ESF +) ., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Anomalies in the magnetostrictive modulation of love surface acoustic waves

  • Aguilera, J. D.
  • Loriente, R.
  • Soria, L.
  • Begue, A.
  • Ranchal, R.
  • Gràcia Tortadès, Isabel
  • Vallejos, Stella
  • Hernando, A.
  • Marín, P.
  • Presa, P. de la
  • Matatagui, D.
A magnetic surface acoustic wave (SAW) sensor is built by growing a 100 nm galfenol (Fe<inf>72</inf>Ga<inf>28</inf>) film by sputtering between the interdigitated transducers of a SAW delay line. Love waves are produced when the shear waves excited on the piezoelectric substrate are guided by a 3.1 μm layer of amorphous SiO<inf>2</inf>. Due to the magnetostrictive nature of galfenol deposited on top, the application of magnetic fields modulates the propagation of the mechanical excitations along the sensor by the strain coupling. By introducing the delay line in a feedback loop circuit, these changes are studied as resonant frequency variations. Magnetic field cycles of ±40 mT are applied to the sample and the resonant frequency shift is tracked simultaneously. The sensor exhibited hysteretic frequency behavior that depends on the orientation of the applied magnetic field relative to the direction of Love wave propagation. In the configuration in which the wave vector and the applied field form an angle of 45°, the resonant frequency seems to increase with the magnetization induced by the external field. When the wave vector propagation is parallel to the field, two positive peaks appear close to the coercive field of the film, which has not been reported before. This is probably due to a more complex relationship between the acoustic wave and the magnetic state of the film which could be exploited to give rise to new models of magnetic sensors., The authors acknowledge the Spanish Ministry of Science and Innovation for financing the projects PID2021-123112OB-C21 (AEI/FEDER), PDC2022-133039-I00 (AEI/FEDER), PID2021-122980OB-C51 (AEI/FEDER) and Comunidad de Madrid (NANOMAGCOST-CM S2018/NMT-4321. J.D.A. received funding from Next Generation EU, Ministerio de Trabajo y Economía, Comunidad de Madrid, Spain, Programa Investigo from grant 96-UCM-INV. D. M. acknowledges financial support from the Spanish Ministry of Science and Innovation through the Ramón y Cajal grant RYC2021‐031166‐I., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photocontrol of nitrogen sites for poisoning-free NO₂ sensing

  • Pérez-Román, Berta
  • Matatagui, D.
  • Mazo Fernández, María Alejandra
  • Marín, Pilar
  • Pascual, Laura
  • López-Sánchez, Jesús
  • Rubio Marcos, Fernando
In this communication, we present a comprehensive investigation of the UV photoactivation mechanism in nitrogen-doped carbon-based sensing materials. Here, tailored nitrogen incorporation enables rapid and effective NO₂ detection, driven by the synergistic interplay between the chemical nature and electronic properties of fundamentally graphitic-, pyridinic- and pyrrolic-N species. The influence of 275 nm UV power density is probed via in-situ confocal Raman microscopy measurements. The results reveal its critical role in the desorption process and its correlation with microstructural features and nitrogen species functionalization. Interestingly, the combination of hierarchical porous structure with high SBET (2783 m2/g), a large number of structural defects, and nitrogen doping through different species, promotes p- and n-type behaviors. This scenario leads to superior sensing performance. At 7 mW/cm2, the device shows poisoning-free operation, 11.76%/ppm sensitivity, and a detection limit of 2.55 ppb. Therefore, the work advances a technologically demanding solution to achieve practical monitoring of NO₂ at room temperature in the sub-ppm range, with high sensitivity, rapid recovery, and stability against poisoning. © 2026 The Authors, The authors acknowledge funding support from projects PID2024-156318OB-I00, PID2024-156318OB-I00, PID2023-151036OA-I00, PDC2022-133039-I00, PID2021-123112OB-C21, TED2021-132800B-I00, and TED2021-129688B-C21 funded by MCIU/AEI/10.130 39/501100011033 and the European Social Fund Plus (ESF+). We also acknowledge PERTE-VEC INVECPRO for the financial support of the EU within the frame of the initiative Next Generation EU (Proyecto Estrat´egico para la Recuperaci´on y Transformaci´on Econ´omica en el sector del Vehículo El´ectrico y Conectado). J. L.-S. acknowledges the financial support from grant RYC2022-035912-I funded by MCIU/AEI/ 10.13039/ 501100011033 and by the European Social Fund Plus (ESF+). D. M extents gratitude to financial support within the RYC2021-031166-I funded by MCIU/AEI/10.13039/501100011033 and by the European Social Fund Plus (ESF+). F. R-M and B. P-R also express gratitude to Comunidad de Madrid for financial support through the Industrial Doctorates project (IND2020/IND-17375), co-financed by the European Social Fund., Peer reviewed
Docta Complutense
Publicación Artículo científico (JournalArticle)

Photocontrol of nitrogen sites for poisoning-free NO₂ sensing

  • Pérez Román, Berta
  • Matatagui Cruz, Daniel
  • Mazo, M. Alejandra
  • Marín Palacios, María Pilar
  • Pascual, Laura
  • López Sánchez, Jesús
  • Rubio Marcos, Fernando
In this communication, we present a comprehensive investigation of the UV photoactivation mechanism in nitrogen-doped carbon-based sensing materials. Here, tailored nitrogen incorporation enables rapid and effective NO₂ detection, driven by the synergistic interplay between the chemical nature and electronic properties of fundamentally graphitic-, pyridinic- and pyrrolic-N species. The influence of 275 nm UV power density is probed via in-situ confocal Raman microscopy measurements. The results reveal its critical role in the desorption process and its correlation with microstructural features and nitrogen species functionalization. Interestingly, the combination of hierarchical porous structure with high SBET (2783 m2/g), a large number of structural defects, and nitrogen doping through different species, promotes p- and n-type behaviors. This scenario leads to superior sensing performance. At 7 mW/cm2, the device shows poisoning-free operation, 11.76%/ppm sensitivity, and a detection limit of 2.55 ppb. Therefore, the work advances a technologically demanding solution to achieve practical monitoring of NO₂ at room temperature in the sub-ppm range, with high sensitivity, rapid recovery, and stability against poisoning.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Anomalies in the magnetostrictive modulation of love surface acoustic waves

  • Aguilera Martín, Juan Diego
  • Loriente Saturio, Raquel
  • Soria, L.
  • Begue Gracia, Adrián
  • Ranchal Sánchez, Rocío
  • Gràcia, I.
  • Vallejos, S.
  • Hernando Grande, Antonio
  • Marín Palacios, María Pilar
  • Presa Muñoz De Toro, Patricia Marcela De La
  • Matatagui Cruz, Daniel
A magnetic surface acoustic wave (SAW) sensor is built by growing a 100 nm galfenol (Fe72Ga28) film by sputtering between the interdigitated transducers of a SAW delay line. Love waves are produced when the shear waves excited on the piezoelectric substrate are guided by a 3.1 μm layer of amorphous SiO2. Due to the magnetostrictive nature of galfenol deposited on top, the application of magnetic fields modulates the propagation of the mechanical excitations along the sensor by the strain coupling. By introducing the delay line in a feedback loop circuit, these changes are studied as resonant frequency variations. Magnetic field cycles of ±40 mT are applied to the sample and the resonant frequency shift is tracked simultaneously. The sensor exhibited hysteretic frequency behavior that depends on the orientation of the applied magnetic field relative to the direction of Love wave propagation. In the configuration in which the wave vector and the applied field form an angle of 45°, the resonant frequency seems to increase with the magnetization induced by the external field. When the wave vector propagation is parallel to the field, two positive peaks appear close to the coercive field of the film, which has not been reported before. This is probably due to a more complex relationship between the acoustic wave and the magnetic state of the film which could be exploited to give rise to new models of magnetic sensors.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Molecular architecture strategies for UV-enhanced NO2 sensors under ambient conditions

  • Pérez Roman, Berta
  • López Sánchez, Jesús
  • Mazo, M. Alejandra
  • Peña Moreno, Álvaro
  • Calatayud, David G.
  • Marín Palacios, María Pilar
  • Pascual, Laura
  • Rojas Hernández, Rocío E.
  • Matatagui Cruz, Daniel
  • Rubio Marcos, Fernando
Detecting nitrogen dioxide (NO₂) below sub-ppm levels is critical for mitigating health risks associated with air pollution. Carbon-based materials are promising candidates for gas sensing, but their performance depends strongly on structural and chemical tuning. Here we show that nitrogen-doped carbide-derived carbons syn­thesized using dendritic molecular architectures exhibit enhanced gas-sensing properties. The resulting 2D porous structure demonstrates p-type response to NO₂, with a sensitivity of 7.9 ± 2.8 %/ppm in dark conditions. Under ultraviolet illumination, the response increases by 150 % without inducing poisoning effects. This improvement is attributed to the combined effects of nitrogen doping, high defect concentration, and hierar­chical micro-mesoporosity. Our results demonstrate that molecular design is a powerful strategy to engineer carbon materials with tunable gas-sensing properties, offering new opportunities for next-generation detection technologies.
Docta Complutense
Publicación Artículo científico (JournalArticle)

High magnetic sensitivity at the coercive field induced by shear horizontal SAW in polycrystalline FeGa films

  • Aguilera Martín, Juan Diego
  • Ranchal Sánchez, Rocío
  • Gálvez, Fernando
  • Colino, Jose Miguel
  • Gràcia, Isabel
  • Vallejos, Stella
  • Hernando Grande, Antonio
  • Marín Palacios, María Pilar
  • Presa Muñoz De Toro, Patricia Marcela De La
  • Matatagui Cruz, Daniel
A Love wave device is designed to generate surface acoustic waves (SAWs) with strong shear-horizontal polarization, interacting with a polycrystalline Fe72Ga28 magnetostrictive layer. The shear strain induced by these waves at a frequency of approximate to 160 MHz, coupled with magnetoelastic effects, leads to domain magnetization oscillation, resulting in unique responses that are particularly pronounced near the coercive field. Experimental results reveal that the response of the sensor is highly sensitive to the angle between the applied magnetic field and the wave propagation direction, with profiles that can vary significantly depending on this angle, with some configurations resulting in practically opposite responses. A particularly relevant case arises when the magnetic field is aligned with the Love wave propagation direction. In this case, the sensor response shows mainly a monotonic increase with the magnetic field, except near the coercive field, where a sharp peak emerges and then abruptly collapses, resulting in a magnetic sensitivity of approximate to 5 Hz/nT (0.031 ppm nT-1). This high sensitivity near the coercive field opens the door to the development of high-performance sensors, simplifying electronics while leveraging the key advantages of SAW technology, including low power consumption, compact size, real-time response, and portability. A theoretical model is also discussed to further understand the underlying phenomena and optimize the design of next-generation devices, which hold significant potential for sensor applications across various fields.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Real-time monitoring of breath biomarkers using magnonic wireless sensor based on magnetic nanoparticles

  • Aguilera Martín, Juan Diego
  • Arranz López, Daniel
  • Peña Moreno, Álvaro
  • Marín Palacios, María Pilar
  • Horrillo, M.C.
  • Presa Muñoz De Toro, Patricia Marcela De La
  • Matatagui Cruz, Daniel
In this paper, an innovative device with gas remote-sensing capability is proposed, which is based on the interaction between magnetic nanoparticles and gases associated with exhaled breath biomarkers that can have a metabolic origin. Magnetite (Fe₃O₄) nanoparticles of around 30 nm have been used. The gas molecules adsorbed on surface modulate the magnetization of the nanoparticles and magnetostatic surface spin waves (MSSW) propagated on an yttrium iron garnet (YIG) thin film are used to detect this modulation by the induced frequency shift. The optimization of the remote gas sensor has been carried out through simulations of a magnetic model. Simulations show the feasibility of developing a high-performance remote sensor by encapsulating the nanostructures in a polytetrafluoroethylene (PTFE) tube and detecting part per million changes in their magnetization. The results show the possibility of developing new, inexpensive, reusable, contactless magnetic gas sensors employing spin waves as transductor. The developed sensor shows a high sensitivity and selectivity to concentrations as low as 50 ppm of different breath biomarkers.