Pasar al contenido principal

HETEROESTRUCTURAS FERROICAS IMPULSADAS POR LUZ PARA APLICACIONES MULTI-FISICAS SOSTENIBLES

PID2023-153398OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Inspection of steel elements using electromagnetic induction: A finite elements study

  • García García-Tuñón, Miguel Ángel
This study presents a finite element method (FEM) analysis aimed at detecting inhomogeneities in steel components using electromagnetic induction techniques. The results obtained are consistent with previous experimental studies and analytical models, while also providing significant complementary insights. Notably, the application of FEM enables detailed mapping of the electromagnetic field distributions involved in the induction process, even in complex geometries, an advantage not afforded by conventional analytical models. The findings demonstrate the method's capability to detect stress levels well below the material's elastic limit, as well as the presence of microcracks. This early detection capability is crucial for preventing mechanical failure in the analyzed components. © 2025 IEEE., This work has been funded by the Spanish Ministry of Science and Innovation via Project No. PID2023-153398OB-I00 and BEETHOVEN project funded by the European Comission under grant agreement 101129912. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Education and Culture Executive Agency (EACEA). Neither the European Union nor EACEA can be held responsible for them., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Solvent-assisted spark plasma sintering of SrFe12O19 permanent magnets

  • Pino-Batlles, Carmen del
  • Rojas-Hernández, Rocío E.
  • Granados-Miralles, Cecilia
  • Berja, Alba
  • Casaleiz, DAniel
  • Fernández Lozano, José Francisco
  • Quesada, Adrián
  • Serrano Rubio, Aída
The increased demand expected for permanent magnets in the next few years and the need for a more sustainable production in the ceramic industry bring forward the need to develop new and greener processes. Herein, spark plasma sintering is employed to consolidate strontium hexaferrite magnets at lower sintering temperatures by adding a transient solvent, such as glacial acetic acid, to the starting powder. The addition of a solvent activates the onset of mass transport at reduced temperatures, leading to dense pieces with relative densities above 95% at 850 °C, lower than those reported in previous studies. An optimized solvent-assisted spark plasma sintering strategy is established, allowing us to identify the parameter ranges that lead to a trade-off between relative density and coercivity. The results presented unveil that integrating solvent-assisted approaches with advanced sintering techniques can be a powerful pathway for the development of new strategies for production of ceramic permanent magnets., This work was supported by the Spanish Ministry for Science, Innovation and Universities (MICIU) under the projects PID2021- 124585NB-C33 funded by MICIU/AEI/10.13039/501100011033 and by FEDER, EU and PID2023–151036OA-I00, TED2021-130957B-C51, CNS2022–135876 and CNS2024-154490 funded by MICIU/AEI/ 10.13039/501100011033 and by the ‘‘European Union NextGenerationEU/PRTR’’. This work has also been supported by BEETHOVEN project funded by the European Comission under grant agreement 101129912. R.E. R.-H. acknowledges the financial support from the Estonian Research Council (grants PSG-466) and project PID2023-153398OB-I00 funded by MCIU/AEI/10.13039/ 501100011033 and the European Social Fund Plus (ESF+). A.S. and C. G.-M. acknowledge financial support from grant RYC2021–031236-I and RYC2021–031181-I, respectively, funded by MICIU/AEI/10.13039/ 501100011033 and by the “European Union NextGenerationEU/PRTR”., Supplementary data to this article can be found online at https://doi. org/10.1016/j.jmrt.2026.04.255., Peer reviewed, Sin experimentacion animal ni uso de NAMs
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Molten salt–assisted screen printing of highly textured Zn2SiO4 films with enhanced deep UV emission

  • Necib, J.
  • Feldbach, E.
  • Romet, I.
  • Nagirnyi, V.
  • Hussainova, I.
  • Jüstel, T.
  • Rojas-Hernández, Rocío E.
A novel and scalable approach for the fabrication of deep ultraviolet (UV) emitting materials is presented through the synthesis of highly textured zinc silicate films using screen printing assisted by a NaCl–KCl eutectic flux. This work provides the first demonstration of intrinsic deep UV emission in screen-printed Zn2SiO4 films and establishes a correlation between processing conditions, interfacial phase evolution, and optical response. The films exhibited strong preferential orientation along the (300) plane with Lotgering factors reaching up to 0.94. Interface analysis reveals the pivotal role of flux-mediated phase transformations in governing film growth dynamics and surface morphology. Detailed luminescence studies identified intense deep UV emission at 4.43 eV (280 nm), attributed to intrinsic electronic transitions within the Zn2SiO4 material. Synchrotron radiation studies indicate that the emission involves band-to-band transitions and excitonic processes influenced by the local structural environment. Notably, emission intensity correlates strongly with both crystallographic texturing and the quality of the film–substrate interface, highlighting the key role of interface and structural control in enhancing deep UV emission. The demonstrated method offers a promising pathway for the development of mercury-free and rare-earth-free deep UV emitters for next-generation photonic and optoelectronic applications. This journal is © The Royal Society of Chemistry, 2026, The financial support from the Estonian Research Council through grants PSG466 (R. E. Rojas-Hernandez), PRG643 and PRG3028 (I. Hussainova), and PRG2733 (V. Nagirnyi) is gratefully acknowledged. Researchers from the University of Tartu, Estonia were supported also by the ERDF funding in Estonia granted to the Centre of Excellence TK141 “Advanced materials and high-technology devices for sustainable energetics, sensorics and nanoelectronics (HiTechDevices)” (grant no. TK141 2014–2020.4.01.15-0011). R. E. R. H. acknowledges the financial support from project PID2023-153398OB-I00 funded by MCIU/AEI/10.13039/501100011033 and the European Social Fund Plus (ESF+). We acknowledge MAX IV Laboratory for beamtime on the FinEstBeAMS beamline under Proposal 20230209. Research conducted at MAX IV, a Swedish national user facility, is supported by the Swedish Research council under contract 2018-07152, the Swedish Governmental Agency for Innovation Systems under contract 2018-04969, and Formas under contract 2019-02496., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Stress release-induced piezoresponse in lead-free piezoceramics with high-symmetry morphotropic phase boundary

  • Vendrell Villafruela, Xavier|||0000-0003-4705-8253
  • Rubio Marcos, Fernando
  • del Campo, Adolfo
  • Mestres, Lourdes
  • García García, José Eduardo|||0000-0002-1232-1739
The (1 - x)(Bi0.5Na0.5)TiO3-xBaTiO3 (BNT-BT) system has attracted a great deal of interest because it presents a morphotropic phase boundary (MPB) between the rhombohedral and tetragonal phases for 0.05 < x¿<¿0.08. Identifying the MPB in the BNT-BT system often results in materials exhibiting a high-symmetry (pseudo)cubic x-ray diffraction pattern. However, this singular composition exhibits ferroelectricity, which has been explained as a consequence of a field-induce phase transformation. Here, we demonstrate that the stress release after poling, from the virgin state of the sample, is a crucial phenomenon to obtain piezoelectric response in MPB BNT-BT. The mechanism behind the unusual poling–depoling process in piezoceramics exhibiting high-symmetry MPB is elucidated by combining x-ray diffraction measurements and advanced Raman spectroscopy. This underscores the importance of post-poling stress release from the virgin state as a critical factor in attaining piezoelectric response in lead-free piezoceramics with high-symmetry MPB configurations., This work was supported by the Spanish Ministry of Science and Innovation (Grant Nos. PID2020-114192RB-C41, TED2021-130957B-C51, and PID2023-153398OB-I00), funded by MICIU/AEI/10.13039/501100011033 and the European Social Fund Plus (FSE+). F. R-M. acknowledges financial support from Comunidad de Madrid through the Doctorados Industriales project (Grant No. IND2020/IND17375), co-funded by the European Social Fund. X.V., a Serra Húnter Fellow, expresses gratitude to the Generalitat de Catalunya for support through Project 2023 CLIMA 00009, Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Stress release-induced piezoresponse in lead-free piezoceramics with high-symmetry morphotropic phase boundary

  • Vendrell Villafruela, Xavier
  • Rubio Marcos, Fernando
  • del Campo, Adolfo
  • Mestres, Lourdes
  • García García, José Eduardo
The (1 - x)(Bi0.5Na0.5)TiO3-xBaTiO3 (BNT-BT) system has attracted a great deal of interest because it presents a morphotropic phase boundary (MPB) between the rhombohedral and tetragonal phases for 0.05 < x¿<¿0.08. Identifying the MPB in the BNT-BT system often results in materials exhibiting a high-symmetry (pseudo)cubic x-ray diffraction pattern. However, this singular composition exhibits ferroelectricity, which has been explained as a consequence of a field-induce phase transformation. Here, we demonstrate that the stress release after poling, from the virgin state of the sample, is a crucial phenomenon to obtain piezoelectric response in MPB BNT-BT. The mechanism behind the unusual poling–depoling process in piezoceramics exhibiting high-symmetry MPB is elucidated by combining x-ray diffraction measurements and advanced Raman spectroscopy. This underscores the importance of post-poling stress release from the virgin state as a critical factor in attaining piezoelectric response in lead-free piezoceramics with high-symmetry MPB configurations., This work was supported by the Spanish Ministry of Science and Innovation (Grant Nos. PID2020-114192RB-C41, TED2021-130957B-C51, and PID2023-153398OB-I00), funded by MICIU/AEI/10.13039/501100011033 and the European Social Fund Plus (FSE+). F. R-M. acknowledges financial support from Comunidad de Madrid through the Doctorados Industriales project (Grant No. IND2020/IND17375), co-funded by the European Social Fund. X.V., a Serra Húnter Fellow, expresses gratitude to the Generalitat de Catalunya for support through Project 2023 CLIMA 00009, Peer Reviewed, Postprint (published version)
Docta Complutense
Publicación Artículo científico (JournalArticle)

Photocontrol of nitrogen sites for poisoning-free NO₂ sensing

  • Pérez Román, Berta
  • Matatagui Cruz, Daniel
  • Mazo, M. Alejandra
  • Marín Palacios, María Pilar
  • Pascual, Laura
  • López Sánchez, Jesús
  • Rubio Marcos, Fernando
In this communication, we present a comprehensive investigation of the UV photoactivation mechanism in nitrogen-doped carbon-based sensing materials. Here, tailored nitrogen incorporation enables rapid and effective NO₂ detection, driven by the synergistic interplay between the chemical nature and electronic properties of fundamentally graphitic-, pyridinic- and pyrrolic-N species. The influence of 275 nm UV power density is probed via in-situ confocal Raman microscopy measurements. The results reveal its critical role in the desorption process and its correlation with microstructural features and nitrogen species functionalization. Interestingly, the combination of hierarchical porous structure with high SBET (2783 m2/g), a large number of structural defects, and nitrogen doping through different species, promotes p- and n-type behaviors. This scenario leads to superior sensing performance. At 7 mW/cm2, the device shows poisoning-free operation, 11.76%/ppm sensitivity, and a detection limit of 2.55 ppb. Therefore, the work advances a technologically demanding solution to achieve practical monitoring of NO₂ at room temperature in the sub-ppm range, with high sensitivity, rapid recovery, and stability against poisoning.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Molecular architecture strategies for UV-enhanced NO2 sensors under ambient conditions

  • Pérez Roman, Berta
  • López Sánchez, Jesús
  • Mazo, M. Alejandra
  • Peña Moreno, Álvaro
  • Calatayud, David G.
  • Marín Palacios, María Pilar
  • Pascual, Laura
  • Rojas Hernández, Rocío E.
  • Matatagui Cruz, Daniel
  • Rubio Marcos, Fernando
Detecting nitrogen dioxide (NO₂) below sub-ppm levels is critical for mitigating health risks associated with air pollution. Carbon-based materials are promising candidates for gas sensing, but their performance depends strongly on structural and chemical tuning. Here we show that nitrogen-doped carbide-derived carbons syn­thesized using dendritic molecular architectures exhibit enhanced gas-sensing properties. The resulting 2D porous structure demonstrates p-type response to NO₂, with a sensitivity of 7.9 ± 2.8 %/ppm in dark conditions. Under ultraviolet illumination, the response increases by 150 % without inducing poisoning effects. This improvement is attributed to the combined effects of nitrogen doping, high defect concentration, and hierar­chical micro-mesoporosity. Our results demonstrate that molecular design is a powerful strategy to engineer carbon materials with tunable gas-sensing properties, offering new opportunities for next-generation detection technologies.