Pasar al contenido principal

MATERIALES MAGNETICOS NANO Y MICROESTRUCTURADOS INTEGRADOS EN MINIATURIZADOS E INTELIGENTES SISTEMAS ANALITICOS PARA DETECTAR ENFERMEDADES MEDIANTE EL ALIENTO

PID2021-123112OB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD COMPLUTENSE DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 22
Encontrada(s) 1 página(s)

Docta Complutense
Publicación Artículo científico (JournalArticle)

Towards the standardization of photothermal measurements of iron oxide nanoparticles in two biological windows

  • Arranz, Daniel
  • Weigand Talavera, Rosa María
  • Presa Muñoz De Toro, Patricia Marcela De La
A systematic study on laser-induced heating carried out in two biological windows (800 nm and 1053 nm) for Fe_(3)O_(4) nanoparticles in water suspension showed evidence of the strong dependence of the specific absorption rate (SAR) on extrinsic parameters such as the vessel volume or laser spot size. The results show that a minimum of 100 mu L must be used in order to obtain vessel-size-independent SARs. In addition, at a constant intensity but different laser powers and spot size ratios, the SARs can differ by a three-fold factor, showing that the laser power and irradiated area strongly affect the heating curves for both wavelengths. The infrared molecular absorber IRA 980B was characterized under the same experimental conditions, and the results confirm the universality of the SARs' dependence on these extrinsic parameters. Based on these results, we propose using solutions of IRA 980B as a standard probe for SAR measurements and employing the ratio SAR(iron oxide)/SAR(IRA 980B) to compare different measurements performed in different laboratories. This measurement standardization allows us to extract more accurate information about the heating performance of different nanoparticles.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Insights into the synthesis parameters effects on the structural, morphological, and magnetic properties of copper oxide nanoparticles

  • Mbarek, Fatma
  • Cherif, Ichraf
  • Cherif, Amira
  • Alonso, Jose Maria
  • Morales, Irene
  • Presa Muñoz De Toro, Patricia Marcela De La
  • Ammar, Salah
The present study aims at the integration of the "oxalic conversion" route into "green chemistry" for the synthesis of copper oxide nanoparticles (CuO-NPs) with controllable structural, morphological, and magnetic properties. Two oxalate-containing precursors (H_2C_2º_4.2H_2O and (NH_4)_(2)C_2O_4.H_2O) and different volume ratios of a mixed water/glycerol solvent were tested. First, the copper oxalates were synthesized and then subjected to thermal decomposition in air at 400 degrees C to produce the CuO powders. The purity of the samples was confirmed by X-ray powder diffraction (XRPD), and the crystallite sizes were calculated using the Scherrer method. The transmission electron microscopy (TEM) images revealed oval-shaped CuO-NPs, and the scanning electron microscopy (SEM) showed that morphological features of copper oxalate precursors and their corresponding oxides were affected by the glycerol (V/V) ratio as well as the type of C_2º_4^2- starting material. The magnetic properties of CuO-NPs were determined by measuring the temperature-dependent magnetization and the hysteresis curves at 5 and 300 K. The obtained results indicate the simultaneous coexistence of dominant antiferromagnetic and weak ferromagnetic behavior.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Transition from AFM spin canting to spin glass-AFM exchange as particle size decreases in LaFeO_3

  • Alshalawi, Dhoha
  • Alonso, Jose Maria
  • Landa-Canovas, Angel R.
  • Presa Muñoz De Toro, Patricia Marcela De La
In this work, we have studied structural and magnetic properties of LaFeO_3 as a function of the particle size d, from bulk (d >> 1 µm) to nanoscale (d ≈ 30 nm). A large number of twins were observed for large particles that disappear for small particle sizes. This could be related to the softening of the FeO_6 distortion as particle size decreases. It was observed that the bulk sample showed spin canting that disappeared for d ~ 125 nm and can be associated with the smoothening of the orthorhombic distortion. On the other hand, for d < 60 nm, the surface/volume ratio became high and, despite the high crystallinity of the nanoparticle, a notable exchange effect bias appeared, originated by two magnetic interactions: spin glass and antiferromagnetism. This exchange bias interaction was originated by the formation of a "magnetic core-shell": the broken bonds at the surface atoms give place to a spin glass behavior, whereas the inner atoms maintain the antiferromagnetic G-type order. The LaFeO_3 bulk material was synthesized by the ceramic method, whereas the LaFeO_3 nanoparticles were synthesized by the sol-gel method; the particle size was varied by annealing the samples at different temperatures. The physical properties of the materials have been investigated by XRD, HRTEM, TGA, and AC and DC magnetometry.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Insights into the Synthesis Parameters Effects on the Structural, Morphological, and Magnetic Properties of Copper Oxide Nanoparticles

  • Mbarek, Fatma
  • Chérif, Ichraf
  • Chérif, Amira
  • Alonso, José M.
  • Morales, Irene
  • Presa, Patricia de la
  • Ammar, Salah
The present study aims at the integration of the “oxalic conversion” route into “green chemistry” for the synthesis of copper oxide nanoparticles (CuO-NPs) with controllable structural, morphological, and magnetic properties. Two oxalate-containing precursors (H2C2O4.2H2O and (NH4)2C2O4.H2O) and different volume ratios of a mixed water/glycerol solvent were tested. First, the copper oxalates were synthesized and then subjected to thermal decomposition in air at 400 °C to produce the CuO powders. The purity of the samples was confirmed by X-ray powder diffraction (XRPD), and the crystallite sizes were calculated using the Scherrer method. The transmission electron microscopy (TEM) images revealed oval-shaped CuO-NPs, and the scanning electron microscopy (SEM) showed that morphological features of copper oxalate precursors and their corresponding oxides were affected by the glycerol (V/V) ratio as well as the type of C2O42− starting material. The magnetic properties of CuO-NPs were determined by measuring the temperature-dependent magnetization and the hysteresis curves at 5 and 300 K. The obtained results indicate the simultaneous coexistence of dominant antiferromagnetic and weak ferromagnetic behavior., This research was supported by the Ministry of Higher Education and Scientific Research (Tunisia) and funded by Ministerio de Economıa y Competitividad (MINECO) grant number PID2021-123112OB-C21., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Real-time monitoring of breath biomarkers using magnonic wireless sensor based on magnetic nanoparticles

  • Aguilera, J.D.
  • Arranz, D.
  • Peña, A.
  • Horrillo, Carmen
  • De la Presa, D.
  • Matatagui, D.
8 páginas, 6 figuras, In this paper, an innovative device with gas remote-sensing capability is proposed, which is based on the interaction between magnetic nanoparticles and gases associated with exhaled breath biomarkers that can have a metabolic origin. Magnetite (Fe₃O₄) nanoparticles of around 30 nm have been used. The gas molecules adsorbed on surface modulate the magnetization of the nanoparticles and magnetostatic surface spin waves (MSSW) propagated on an yttrium iron garnet (YIG) thin film are used to detect this modulation by the induced frequency shift. The optimization of the remote gas sensor has been carried out through simulations of a magnetic model. Simulations show the feasibility of developing a high-performance remote sensor by encapsulating the nano- structures in a polytetrafluoroethylene (PTFE) tube and detecting part per million changes in their magnetiza- tion. The results show the possibility of developing new, inexpensive, reusable, contactless magnetic gas sensors employing spin waves as transductor. The developed sensor shows a high sensitivity and selectivity to concen- trations as low as 50 ppm of different breath biomarkers., The authors acknowledge the Spanish Ministry of Science and Innovation for financing the projects RETOS RTI2018-095856-B, RTI2018-095856-B-C22 (AEI/FEDER), RTI2018-095856-B-C21 (AEI/FEDER), PID2021-123112OB-C21 (AEI/FEDER), PDC2022-133039-I00 (AEI/FEDER), Comunidad de Madrid (NANOMAGCOST-CM S2018/NMT-4321 and COST Action CA21101. J.D.A received funding from Next Generation EU, Ministerio de Trabajo y Economía, Comunidad de Madrid, Spain, Programa Investigo from grant 96-UCM-INV. D. M. acknowledges financial support from the Spanish Ministry of Science and Innovation (MCI) through the Ramóon y Cajal grant RYC2021-031166-I. A. P. acknowledges funding from grant PRE2019-0875001234 (MCI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Engineered Fe-Based Nanocolumnar Films

  • Garrido-Segovia, María
  • Martínez Orellana, Lidia
  • Huttel, Yves
  • Gyergyek, Sašo
  • Espinosa, Ana
  • Navarro, Elena
  • García-Martín, José Miguel
Trabajo presentado en el Advanced Research Workshop: Functional Spintronic Nanomaterials for Radiation Detection and Energy Harvesting celebrado en Kiev (Ucrania), del 25 al 27 de septiembre de 2023, Nowadays, there is great interest in obtaining nanostructured thin films in large areas using methods that can be scaled up for mass production. Nanocolumnar films fabricated by glancing angle deposition with magnetron sputtering (MS-GLAD) are a very promising approach for this purpose. In this work, the morphology, crystalline structure and magnetic properties of iron nanocolumnar films obtained by MS-GLAD are studied. It is also shown how these features are modified when the nanocolumnar films are subjected to thermal treatments transforming the iron into some of its different oxides. An additional coating is also studied, which consists of the deposition of platinum (Pt) nanoparticles, generated by a multiple ion cluster source, on top of the iron nanocolumns. The morphology and the wettability properties of that heterogeneous system are reported., Projects SPS G5792, from the Science for Peace and Security Programme of NATO, ILINK22048, from the i-LINK 2022 Programme of CSIC, and PID2021- 126524NB-100, funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe", are acknowledged. Also, the work has been supported by the Ministerio de Ciencia e Innovación (MICINN) through the projects, PID2021- 123112OB-C21, TED2021-129688B-C21, Comunidad de Madrid by S2018/NMT- 4321 NANOMAGCOST and S2022/BMD-7434 ASAP-CM, and by the Slovenian Research Agency (Research Core Funding P2-0089). The Ministerio de Universidades has also supported this work through a Formación de Profesorado Universitario (FPU) grant (M. G.-S.)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ball milling and annealing effect in structural and magnetic properties of copper ferrite by ceramic synthesis

  • Cobos, Miguel Ángel
  • Jiménez, José Antonio
  • Llorente, Irene
  • Presa, Patricia de la
  • Hernando, Antonio
This study aims to better understand the relationship between the microstructure and magnetic properties of copper ferrite, which is an inverse spinel that present a body-centered tetragonal structure associated with a remarkable Jahn–Teller (JT) effect. For this goal, a sample has been synthesized by the ceramic route from a stoichiometric mixture of high-purity CuO and FeO powders activated mechanically in a high-energy planetary ball mill. This sample was calcined in air furnace at 1000 ºC for 6 h. As synthetized sample with a cubic structure was divided into two parts and one of them was annealed at 650 ºC for 3 h and slowly cooled to room temperature to obtain a pure tetragonal spinel sample. Furthermore, these two samples were subjected to the same processes of severe plastic deformation by milling for up to 70 h and subsequent annealing at temperatures ranging between 300 and 600 ºC to obtain samples with a mixture of phases in different proportions. For the cubic one, there is no change in its structure due to milling, always remaining 100 % cubic, and the evolution in the saturation magnetization was related to the changes in the density of defects present. On the other hand, copper cations are always found in the octahedral sites of spinel with a tetragonal structure. The small decrease in the degree of inversion to 0.95 induced by milling in this sample is capable of breaking the JT distortion, giving rise to the appearance of a cubic phase. This work demonstrates how the structure, microstructure, defects like stacking faults and deformation twins, and degree of inversion of the different phases are related to changes in magnetic properties., This work was supported by the Ministerio de Ciencia e Innovacion de España (Grant IDs. PID2021-123112OB-C21, PDC2022-133039-I00, TED2021-129688B-C21, PID2021-126166OB-I00, PID2022-138332NB-C41).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Beyond conventional characterization: Defect engineering role for sensitivity and selectivity of room-temperature UV-assisted graphene-based NO₂ sensors

  • Peña, Álvaro
  • López-Sánchez, Jesús
  • Sacco, Leandro
  • Vollebregt, Sten
  • Marqués-Marchán, Jorge
  • Horrillo, Carmen
  • Marín, Pilar
  • Matatagui, Daniel
10 páginas, 6 figuras, 1 tabla, The term graphene-based gas sensors may be too broad, as there are many physicochemical differences within the graphene-based materials (GBM) used for chemiresistive gas sensors. These differences condition the sensitivity, selectivity, recovery, and ultimately the sensing performance of these devices towards air pollutants. Continuous ultraviolet irradiation aids in the desorption of gas molecules and enhances sensor performance. Under these conditions, the devices from this work can reliably monitor NO2 and CO at room temperature, below the human-recommended exposure limits, presenting NO2 LoD down to ~20 ppb. By selecting GBMs with different levels of defectivity, which influence gas adsorption dynamics, and through comprehensive charac- terization, including D, D′, D″, 2D, and G Raman bands, graphene-based gas sensors can be tailored to meet specific sensing requirements. This study examines five different non-oxidized GBM to develop tools and gain a deeper understanding of the relationships between GBM properties and their sensing performance. This research introduces a new standard for defect assessment, moving beyond graphene’s D and G Raman band intensity ratio, to facilitate the successful integration of graphene-based gas sensors into everyday applications, such as envi- ronmental monitoring and industrial safety, and potentially impacting other 2D materials, thereby reducing health risks associated with air pollution., Author A. P. received funding from grant PRE2019-0875001234, Ministerio de Ciencia e Innovaci´on (MCIN), Spain. Authors A. P., D. M., P. M., and M-C. H. received funding from project PDC2022-133039- I00 and PID2021-123112OB-C21 from MCIN/AEI/10.13039/ 501100011033, Spain and European Union Next Generation EU/PRTR. D. M. acknowledges financial support from grant RYC2021-031166-I funded by MCIU/AEI/10.13039/501100011033. J. L.-S. acknowledges the financial support from PID2023-151036OA-I00 funded by MCIU/ AEI/10.13039/501100011033 and by the European Union, and from grant RYC2022-035912-I funded by MCIU/AEI/10.13039/ 501100011033 and by the European Social Fund Plus (ESF+). JM thanks the Regional Government of Madrid for the project P2018/NMT- 4321 NANOMAGCOST. M-C. H acknowledges the support from the COST Action CA21101, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modulating the magnetic properties of Fe3C/C encapsulated core/shell nanoparticles for potential prospects in biomedicine

  • Castellano-Soria, A.
  • López-Méndez, R.
  • Espinosa, A.
  • Granados-Miralles, Cecilia
  • Varela, M.
  • Marín, P.
  • Navarro, E.
  • López-Sánchez, Jesús
In the pursuit of alternative and less invasive medical treatments, magnetic nanoparticles (NPs) have gained significant relevance. Iron carbides NPs stand out for their higher saturation magnetizations compared to iron oxides, while maintaining a suitable biocompatibility. In this work, high control is achieved over the composition and morphology of Fe3C/C encapsulated core/shell nanoparticles through fine-tuning of the sol-gel synthesis parameters. Specifically, the impact of decreasing each surfactant concentration added, nt, the same both for oleylamine (ON) and oleic acid (OA), has been explored. A minimum value for such parameter denoted by nt,min. was required to produce pure Fe3C@C NP-composites. For nt < 4 mmol, some minor α-Fe impurities arise, and the effective carburization becomes unstable due to insufficient carbon. The magnetic properties of the materials prepared were optimized by reducing the excess carbon from surfactants, resulting in saturation magnetization values of 86 emu/g. (for pure Fe3C at nt = 5 mmol) and 102 emu/g (for Fe3C and <2 % w.t. of α-Fe impurity at nt = 4 mmol). In view of this, several cytotoxicity studies for different Fe3C@C samples were conducted, exhibiting excellent biocompatibility in cell-based assays, which could lead to potential application at the forefront of biomedical fields. © 2024 The Authors, The work has been supported by the Ministerio de Ciencia e Innovacion (MCINN) through the projects PDC2022-133039-I00, PID2021-123112OB-C21-MICIIN, TED2021-129688B-C21, MAT2015-65445-C2-1-R, MAT2017-86450-C4-1-R, MAT2015-67557-C2-1-P, RTI2018-095856-B-C21, RTI2018-095303-A-C52, PID2020-114192RB-C41, PIE: 2021-60-E-030, PIE: 2010-6-OE-013, PID2021-122980OB-C51, FPI PRE2020-96246 grant (R.L-M.), and Comunidad de Madrid by NANOMAGCOST-CM, S2013/MIT-2850 NANOFRONTMAG, (MAD2D-CM)-UCM3, S2018/NMT-4321 NANOMAGCOST, 2018-T1/IND-1005 (A.E.) and S2022/BMD-7434 ASAP-CM. C.G.-M. acknowledges financial support from grant RYC2021-031181-I funded by MCIN/AEI/10.13039/501100011033 and by the "European Union NextGenerationEU/PRTR". J. L.-S. acknowledges the financial support from Spanish Ministry of Economic Affairs and Digital Transformation through the project PID2021-122980OB-C5 and from grant RYC2022-035912-I funded by MCIU/AEI/10.13039/501100011033 and by the European Social Fund Plus (ESF+). Electron microscopy measurements were carried out at the Centro Nacional de Microscopia Electronica at the Universidad Complutense de Madrid (ICTS ELECMI, UCM). The authors also acknowledge the BM25-SpLine Staff for their valuable help and the provision of the beamline under the projects A25-2-1053 and A25-2-1009., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Anomalies in the magnetostrictive modulation of love surface acoustic waves

  • Aguilera, J. D.
  • Loriente, R.
  • Soria, L.
  • Begue, A.
  • Ranchal, R.
  • Gràcia Tortadès, Isabel
  • Vallejos, Stella
  • Hernando, A.
  • Marín, P.
  • Presa, P. de la
  • Matatagui, D.
A magnetic surface acoustic wave (SAW) sensor is built by growing a 100 nm galfenol (Fe<inf>72</inf>Ga<inf>28</inf>) film by sputtering between the interdigitated transducers of a SAW delay line. Love waves are produced when the shear waves excited on the piezoelectric substrate are guided by a 3.1 μm layer of amorphous SiO<inf>2</inf>. Due to the magnetostrictive nature of galfenol deposited on top, the application of magnetic fields modulates the propagation of the mechanical excitations along the sensor by the strain coupling. By introducing the delay line in a feedback loop circuit, these changes are studied as resonant frequency variations. Magnetic field cycles of ±40 mT are applied to the sample and the resonant frequency shift is tracked simultaneously. The sensor exhibited hysteretic frequency behavior that depends on the orientation of the applied magnetic field relative to the direction of Love wave propagation. In the configuration in which the wave vector and the applied field form an angle of 45°, the resonant frequency seems to increase with the magnetization induced by the external field. When the wave vector propagation is parallel to the field, two positive peaks appear close to the coercive field of the film, which has not been reported before. This is probably due to a more complex relationship between the acoustic wave and the magnetic state of the film which could be exploited to give rise to new models of magnetic sensors., The authors acknowledge the Spanish Ministry of Science and Innovation for financing the projects PID2021-123112OB-C21 (AEI/FEDER), PDC2022-133039-I00 (AEI/FEDER), PID2021-122980OB-C51 (AEI/FEDER) and Comunidad de Madrid (NANOMAGCOST-CM S2018/NMT-4321. J.D.A. received funding from Next Generation EU, Ministerio de Trabajo y Economía, Comunidad de Madrid, Spain, Programa Investigo from grant 96-UCM-INV. D. M. acknowledges financial support from the Spanish Ministry of Science and Innovation through the Ramón y Cajal grant RYC2021‐031166‐I., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Magnetic nanopillar arrays grown by glancing angle deposition with sputtering

  • Garrido-Segovia, María
  • Navarro, Elena
  • García-Martín, José Miguel
Physical vapor deposition techniques are widely used for fabricating thin films. However, by changing the system's geometry during atom deposition, nanocolumnar films (also called disordered nanopillar arrays) can be produced. The morphology of these films is influenced by factors such as the angle of incidence of the atoms on the substrate, the pressure of the deposition chamber or the energy of such atoms, resulting in different properties. For magnetic materials, this includes an induced morphological uniaxial magnetic anisotropy or the modification of the remanence magnetization and the coercive field. This article covers the characteristics of evaporation and sputtering techniques, focusing on oblique and glancing angle deposition (OBD and GLAD) and the atomic self-shadowing effect that leads to nanocolumnar films. It reviews studies on nanostructured magnetic films, analyzing the magnetic anisotropy, the electrical resistivity, and the ferromagnetic resonance. It also presents our research on iron-based nanocolumnar films fabricated by sputtering and discusses future perspectives in this field., The Ministerio de Universidades has supported this work through a Formaciön de Profesorado Universitario (FPU) grant (M. G.-S.). J.M.G.-M. thanks grant PID2021-126524NB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”. E. Navarro also thanks the Ministerio de Ciencia e Innovación (MCIN) for the support of the work through the projects PID2021-123112OB-C21 and TED2021-129688B-C21 and the Comunidad de Madrid through S2018/NMT-4321 NANOMAGCOST., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photocontrol of nitrogen sites for poisoning-free NO₂ sensing

  • Pérez-Román, Berta
  • Matatagui, D.
  • Mazo Fernández, María Alejandra
  • Marín, Pilar
  • Pascual, Laura
  • López-Sánchez, Jesús
  • Rubio Marcos, Fernando
In this communication, we present a comprehensive investigation of the UV photoactivation mechanism in nitrogen-doped carbon-based sensing materials. Here, tailored nitrogen incorporation enables rapid and effective NO₂ detection, driven by the synergistic interplay between the chemical nature and electronic properties of fundamentally graphitic-, pyridinic- and pyrrolic-N species. The influence of 275 nm UV power density is probed via in-situ confocal Raman microscopy measurements. The results reveal its critical role in the desorption process and its correlation with microstructural features and nitrogen species functionalization. Interestingly, the combination of hierarchical porous structure with high SBET (2783 m2/g), a large number of structural defects, and nitrogen doping through different species, promotes p- and n-type behaviors. This scenario leads to superior sensing performance. At 7 mW/cm2, the device shows poisoning-free operation, 11.76%/ppm sensitivity, and a detection limit of 2.55 ppb. Therefore, the work advances a technologically demanding solution to achieve practical monitoring of NO₂ at room temperature in the sub-ppm range, with high sensitivity, rapid recovery, and stability against poisoning. © 2026 The Authors, The authors acknowledge funding support from projects PID2024-156318OB-I00, PID2024-156318OB-I00, PID2023-151036OA-I00, PDC2022-133039-I00, PID2021-123112OB-C21, TED2021-132800B-I00, and TED2021-129688B-C21 funded by MCIU/AEI/10.130 39/501100011033 and the European Social Fund Plus (ESF+). We also acknowledge PERTE-VEC INVECPRO for the financial support of the EU within the frame of the initiative Next Generation EU (Proyecto Estrat´egico para la Recuperaci´on y Transformaci´on Econ´omica en el sector del Vehículo El´ectrico y Conectado). J. L.-S. acknowledges the financial support from grant RYC2022-035912-I funded by MCIU/AEI/ 10.13039/ 501100011033 and by the European Social Fund Plus (ESF+). D. M extents gratitude to financial support within the RYC2021-031166-I funded by MCIU/AEI/10.13039/501100011033 and by the European Social Fund Plus (ESF+). F. R-M and B. P-R also express gratitude to Comunidad de Madrid for financial support through the Industrial Doctorates project (IND2020/IND-17375), co-financed by the European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic and plasmonic Au-Fe nanocolumnar thin films with tailored anisotropy

  • Garrido-Segovia, María
  • González Sagardoy, María Ujué
  • Magro, Raúl
  • Navarro, Elena
  • Espinosa, Ana
  • García-Martín, José Miguel
This work demonstrates the potential of two magnetic and plasmonic systems combining nanocolumnar gold (Au) and iron (Fe) in nanocolumnar bilayered thin films, fabricated using the glancing angle deposition (GLAD) by the sputtering technique. This approach successfully merges the unique properties of both nanostructured materials, offering a synergistic combination of optical and magnetic functionalities. The article details their morphological, structural, optical and magnetic characteristics, demonstrating how a surface plasmon resonance emerges under specific conditions. This feature enables the application of these systems in plasmonic applications. Furthermore, the magnetic characterization provides evidence for the existence of a perpendicular anisotropy contribution at the Fe/Au interface, thereby allowing for enhanced magnetic tunability and a broader range of magnetic applications. Lastly, the potential of the systems for in vitro biological applications will be investigated by studying the viability and adherence of tumor cells., The Ministerio de Universidades has supported this work through a Formación de Profesorado Universitario (FPU21/00272) grant (M. G.-S.). The authors also acknowledge funding from different projects. J.M.G.-M. thanks grant PID2021-126524NB-100 funded by MCIN/AEI/10.13039/501100011033 and by ‘‘ERDF A way of making Europe’’. E. N. thanks PID2021- 123112OB-C21 funded by MICIIN and PID2024-156318OB-I00 funded by MICIU and TED2021-129688B-C21 funded by AEI. A. E. thanks PID2021-127033OB-C21 and PID2024-161273OB-C21 funded by MCIN/AEI/10.13039/501100011033 and CNS2023-144689 granted by the MCIN/AEI/10.13039/501100011033 and the “European Union NextGenerationEU”/PRTR, Comunidad de Madrid (ASAP-CM S2022/BMD-7434, LUNABRAINsingle bondCM TEC-2024/TEC) and CSIC (PIE-20226AT024 and Ayudas Incorporación de Científicos Titulares OEP (ref. 2024ICT15)). This work was supported by the Severo Ochoa Program for Centers of Excellence in R&D (CEX2024-001445-S), granted to the Instituto de Ciencia de Materiales de Madrid (ICMM-CSIC). This study was carried out within the framework of the TRANSCAN-3 ERA-NET project TRANSCAN2024-2930-142_XPANTHER, with funding provided by the Asociación Española Contra el Cáncer (AECC) and the Instituto de Salud Carlos III (ISCIII). Finally, we express our gratitude to the Conexión Nanomedicina network from CSIC. All authors acknowledge the service from the MiNa Laboratory at IMN, and funding from EU (FEDER, FSE), MCIN/AEI/10.13039/501100011033 and Next Generation EU/PRTR (EQC2021-006944-P). Moreover, they also thank Raquel Álvaro for her help in the EDS measurements., Peer reviewed
Docta Complutense
Publicación Artículo científico (JournalArticle)

Photocontrol of nitrogen sites for poisoning-free NO₂ sensing

  • Pérez Román, Berta
  • Matatagui Cruz, Daniel
  • Mazo, M. Alejandra
  • Marín Palacios, María Pilar
  • Pascual, Laura
  • López Sánchez, Jesús
  • Rubio Marcos, Fernando
In this communication, we present a comprehensive investigation of the UV photoactivation mechanism in nitrogen-doped carbon-based sensing materials. Here, tailored nitrogen incorporation enables rapid and effective NO₂ detection, driven by the synergistic interplay between the chemical nature and electronic properties of fundamentally graphitic-, pyridinic- and pyrrolic-N species. The influence of 275 nm UV power density is probed via in-situ confocal Raman microscopy measurements. The results reveal its critical role in the desorption process and its correlation with microstructural features and nitrogen species functionalization. Interestingly, the combination of hierarchical porous structure with high SBET (2783 m2/g), a large number of structural defects, and nitrogen doping through different species, promotes p- and n-type behaviors. This scenario leads to superior sensing performance. At 7 mW/cm2, the device shows poisoning-free operation, 11.76%/ppm sensitivity, and a detection limit of 2.55 ppb. Therefore, the work advances a technologically demanding solution to achieve practical monitoring of NO₂ at room temperature in the sub-ppm range, with high sensitivity, rapid recovery, and stability against poisoning.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Anomalies in the magnetostrictive modulation of love surface acoustic waves

  • Aguilera Martín, Juan Diego
  • Loriente Saturio, Raquel
  • Soria, L.
  • Begue Gracia, Adrián
  • Ranchal Sánchez, Rocío
  • Gràcia, I.
  • Vallejos, S.
  • Hernando Grande, Antonio
  • Marín Palacios, María Pilar
  • Presa Muñoz De Toro, Patricia Marcela De La
  • Matatagui Cruz, Daniel
A magnetic surface acoustic wave (SAW) sensor is built by growing a 100 nm galfenol (Fe72Ga28) film by sputtering between the interdigitated transducers of a SAW delay line. Love waves are produced when the shear waves excited on the piezoelectric substrate are guided by a 3.1 μm layer of amorphous SiO2. Due to the magnetostrictive nature of galfenol deposited on top, the application of magnetic fields modulates the propagation of the mechanical excitations along the sensor by the strain coupling. By introducing the delay line in a feedback loop circuit, these changes are studied as resonant frequency variations. Magnetic field cycles of ±40 mT are applied to the sample and the resonant frequency shift is tracked simultaneously. The sensor exhibited hysteretic frequency behavior that depends on the orientation of the applied magnetic field relative to the direction of Love wave propagation. In the configuration in which the wave vector and the applied field form an angle of 45°, the resonant frequency seems to increase with the magnetization induced by the external field. When the wave vector propagation is parallel to the field, two positive peaks appear close to the coercive field of the film, which has not been reported before. This is probably due to a more complex relationship between the acoustic wave and the magnetic state of the film which could be exploited to give rise to new models of magnetic sensors.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Molecular architecture strategies for UV-enhanced NO2 sensors under ambient conditions

  • Pérez Roman, Berta
  • López Sánchez, Jesús
  • Mazo, M. Alejandra
  • Peña Moreno, Álvaro
  • Calatayud, David G.
  • Marín Palacios, María Pilar
  • Pascual, Laura
  • Rojas Hernández, Rocío E.
  • Matatagui Cruz, Daniel
  • Rubio Marcos, Fernando
Detecting nitrogen dioxide (NO₂) below sub-ppm levels is critical for mitigating health risks associated with air pollution. Carbon-based materials are promising candidates for gas sensing, but their performance depends strongly on structural and chemical tuning. Here we show that nitrogen-doped carbide-derived carbons syn­thesized using dendritic molecular architectures exhibit enhanced gas-sensing properties. The resulting 2D porous structure demonstrates p-type response to NO₂, with a sensitivity of 7.9 ± 2.8 %/ppm in dark conditions. Under ultraviolet illumination, the response increases by 150 % without inducing poisoning effects. This improvement is attributed to the combined effects of nitrogen doping, high defect concentration, and hierar­chical micro-mesoporosity. Our results demonstrate that molecular design is a powerful strategy to engineer carbon materials with tunable gas-sensing properties, offering new opportunities for next-generation detection technologies.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Vertical Quantum Confinement in Bulk MoS2

  • Obando Guevara, Jairo
  • González García, Álvaro
  • Rosmus, Marcin
  • Olszowska, Natalia
  • González Barrio, Miguel Ángel
  • González Pascual, César
  • Tejeda, Antonio
  • Mascaraque Susunaga, Arantzazu
We experimentally observe quantum confinement states in bulk MoS2 by using angle-resolved photoemission spectroscopy (ARPES). The band structure at the Gamma point reveals quantum well states (QWSs) linked to vertical quantum confinement of the electrons, confirmed by the absence of dispersion in k z and a strong intensity modulation with the photon energy. Notably, the binding energy dependence of the QWSs versus n does not follow the quadratic dependence of a two-dimensional electron gas. Instead, a linear behavior is observed that is consistent with a parabolic-like quantum well. This confinement arises from the mechanical exfoliation preparation method, which leads to the detachment of a multilayer stack from the underlying bulk. This is confirmed by density functional theory (DFT) calculations. The quantum confinement in bulk-like MoS2 not only offers the opportunity to explore intersubband transitions to exploit optical properties but also provides a means to study fundamental quantum phenomena in multilayer stacks of different thicknesses.
Docta Complutense
Publicación Artículo científico (JournalArticle)

DFT simulations of the self-healing behavior of a W〈110〉/W〈112〉 grain boundary in the presence of coexisting point defects

  • Suárez-Recio, J.
  • Fernández Pello, D.
  • Cerdeira, M.A.
  • González Pascual, César
  • González Arrabal, R.
  • Iglesias, R.
Light impurity atoms (LIAs), such as hydrogen and helium, tend to aggregate at pre-existing intrinsic point defects. This aggregation leads to detrimental effects, particularly in environments such as those foreseen in nuclear fusión reactors. There, such impurities would be ubiquitous, resulting in unacceptable material behavior that would unqualify the material as a Plasma Facing Material (PFM). One option to delay the degradation in performance is the use of nanostructured tungsten (NW), showing a large density of grain boundaries (GBs). Although we have already addressed the behavior of a single LIA in a GB, in this work we present the combined synergistic effects of the simultaneous presence of multiple LIAs, vacancies and Self-Interstitial Atoms (SIA) at semicoherent W/W interfaces using ab initio methods. Our results reveal a complex and interesting process in the competition between LIAs and SIAs. When the number of SIAs is low, He appears to hinder their recombination with vacancies, therefore casting doubts on the self-healing provided by NW. However, in the presence of larger numbers of SIAs, their mutual repulsion leads to the opposite behavior. Thus, a thorough thermodynamic assessment in which the evolution of the system may be tracked emerges as the crucial subsequent step in these investigations.
Docta Complutense
Publicación Artículo científico (JournalArticle)

High magnetic sensitivity at the coercive field induced by shear horizontal SAW in polycrystalline FeGa films

  • Aguilera Martín, Juan Diego
  • Ranchal Sánchez, Rocío
  • Gálvez, Fernando
  • Colino, Jose Miguel
  • Gràcia, Isabel
  • Vallejos, Stella
  • Hernando Grande, Antonio
  • Marín Palacios, María Pilar
  • Presa Muñoz De Toro, Patricia Marcela De La
  • Matatagui Cruz, Daniel
A Love wave device is designed to generate surface acoustic waves (SAWs) with strong shear-horizontal polarization, interacting with a polycrystalline Fe72Ga28 magnetostrictive layer. The shear strain induced by these waves at a frequency of approximate to 160 MHz, coupled with magnetoelastic effects, leads to domain magnetization oscillation, resulting in unique responses that are particularly pronounced near the coercive field. Experimental results reveal that the response of the sensor is highly sensitive to the angle between the applied magnetic field and the wave propagation direction, with profiles that can vary significantly depending on this angle, with some configurations resulting in practically opposite responses. A particularly relevant case arises when the magnetic field is aligned with the Love wave propagation direction. In this case, the sensor response shows mainly a monotonic increase with the magnetic field, except near the coercive field, where a sharp peak emerges and then abruptly collapses, resulting in a magnetic sensitivity of approximate to 5 Hz/nT (0.031 ppm nT-1). This high sensitivity near the coercive field opens the door to the development of high-performance sensors, simplifying electronics while leveraging the key advantages of SAW technology, including low power consumption, compact size, real-time response, and portability. A theoretical model is also discussed to further understand the underlying phenomena and optimize the design of next-generation devices, which hold significant potential for sensor applications across various fields.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Real-time monitoring of breath biomarkers using magnonic wireless sensor based on magnetic nanoparticles

  • Aguilera Martín, Juan Diego
  • Arranz López, Daniel
  • Peña Moreno, Álvaro
  • Marín Palacios, María Pilar
  • Horrillo, M.C.
  • Presa Muñoz De Toro, Patricia Marcela De La
  • Matatagui Cruz, Daniel
In this paper, an innovative device with gas remote-sensing capability is proposed, which is based on the interaction between magnetic nanoparticles and gases associated with exhaled breath biomarkers that can have a metabolic origin. Magnetite (Fe₃O₄) nanoparticles of around 30 nm have been used. The gas molecules adsorbed on surface modulate the magnetization of the nanoparticles and magnetostatic surface spin waves (MSSW) propagated on an yttrium iron garnet (YIG) thin film are used to detect this modulation by the induced frequency shift. The optimization of the remote gas sensor has been carried out through simulations of a magnetic model. Simulations show the feasibility of developing a high-performance remote sensor by encapsulating the nanostructures in a polytetrafluoroethylene (PTFE) tube and detecting part per million changes in their magnetization. The results show the possibility of developing new, inexpensive, reusable, contactless magnetic gas sensors employing spin waves as transductor. The developed sensor shows a high sensitivity and selectivity to concentrations as low as 50 ppm of different breath biomarkers.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Hydrogen absorption boosting in mildly annealed bulk MoS2

  • Obando Guevara, Jairo
  • González García, Álvaro
  • Rosmus, Marcin
  • Olszowska, Natalia
  • González Pascual, César
  • Moron Navarrete, Guillermo
  • Fujii, Jun
  • Tejeda Gala, Antonio
  • González Barrio, Miguel Ángel
  • Mascaraque Susunaga, Arantzazu
The basal plane of MoS2 has been considered a potential source of active catalytic sites in hydrogen absorption. Sulfur vacancies can activate the inert basal plane of MoS2; however, achieving sufficient catalytic efficiency requires a high defect concentration of about 12%. We investigated the effect of defects on the hydrogen adsorption on the basal plane of MoS2 using angle-resolved photoemission spectroscopy (ARPES) and density functional theory (DFT) calculations. Mild annealing in terms of temperature and time effectively introduces single sulfur vacancy (VS) defects, as observed from the electronic structural changes that are in excellent agreement with DFT calculations for a VS concentration of ∼4%. Subsequent exposure to molecular hydrogen showed that the higher hydrogen pressure facilitates hydrogen adsorption, as predicted by theoretical calculations. Interestingly, hydrogen exposure restores the electronic structure to a state similar to that of pristine MoS2. These results suggest that the controlled introduction of VS defects via annealing is a promising strategy for enhancing hydrogen adsorption on MoS2, paving the way for its potential use in future catalytic applications.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Effects of partial manganese substitution by cobalt on the physical properties of Pr_(0.7)Sr_(0.3)Mn_(1-x)Co_(x)O_(3) (0 = x=0.15) manganites

  • Zdiri, Feriel
  • Alonso, José María
  • Mnasri, Taoufik
  • Presa Muñoz De Toro, Patricia Marcela De La
  • Morales, Irene
  • Martínez, José Luis
  • Ben Younes, Rached
  • Marín Palacios, María Pilar
We have investigated the structural, magnetic, and electrical transport properties of Pr_(0.7)Sr_(0.3)Mn_(1-x)Co_(x) O_(3) nanopowders (x = 0, 0.05, 0.10 and 0.15). The Pechini Sol-gel method was used to synthesize these nanopowders. X-ray diffraction at room temperature shows that all the nano powders have an orthorhombic structure of Pnma space group crystallography. The average crystallite size of samples x = 0, 0.05, 0.10, and 0.15 are 33.78 nm, 29 nm, 33.61 nm, and 24.27 nm, respectively. Semi-quantitative chemical analysis by energy dispersive spectroscopy (EDS) confirms the expected stoichiometry of the sample. Magnetic measurements indicate that all samples show a ferromagnetic (FM) to paramagnetic (PM) transition with increasing temperature. The Curie temperature T-C gradually decreases (300 K, 270 K, 250 K, and 235 K for x = 0, 0.05, 0.10, and 0.15, respectively) with increasing Co concentrations. The M-H curves for all compounds reveal the PM behavior at 300 K, while the FM behavior characterizes the magnetic hysteresis at low temperature (5 K). The electrical resistivity measurements show that all compounds exhibit metallic behavior at low temperature (T < T rho) well fitted by the relation rho = rho_(0) + rho_(2)T^(2) + rho_(4.5) T^(4.5) and semiconductor behavior above T rho (T > T rho), for which the electronic transport can be explained by the variable range hopping model and the adiabatic small polaron hopping model. All samples have significant magnetoresistance (MR) values, even at room temperature. This presented research provides an innovative and practical approach to develop materials in several technological areas, such as ultra-high density magnetic recording and magneto resistive sensors.